< Back to Issues

2017 Volume 6, Issue 1

THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.

Hole Surface Formation Mechanism of Al O Ceramic Based on Sintering Diamond Bits

Chao Gao, Sheng Wang, Hui Wang

Page Count: 16

Published Online: 27 October 2017

DOI: 10.1520/MPC20170024

Format: PDF

Price: $25.00

Improving the Abrasion Resistance of Concrete to Mitigate Concrete Crosstie Rail Seat Deterioration (RSD)

Amogh A. Shurpali, J. Riley Edwards, Ryan G. Kernes, David A. Lange, Christopher P. L. Barkan

Page Count: 14

Published Online: 12 December 2017

DOI: 10.1520/MPC20170051

Format: PDF

Price: $25.00

Synthesis and Comparative Study on Intergranular Corrosion Characteristics of Stabilized 5A Grade Cast Duplex Stainless Steel

P. Aneesh Kumar, S. P. Kumaresh Babu, Asish Shaji Varghese

Page Count: 12

Published Online: 19 September 2017

DOI: 10.1520/MPC20170029

Format: PDF

Price: $25.00

Cavitation in Rolling Contact Bearings

Y. Meged

Page Count: 16

Published Online: 01 December 2017

DOI: 10.1520/MPC20170023

Format: PDF

Price: $25.00

Metallurgical Analysis of Inconel 625 Metallic Gaskets Produced by Centrifugal Casting

B. Rivolta, R. Gerosa, F. Tavasci, L. Ori Belometti

Page Count: 9

Published Online: 17 October 2017

DOI: 10.1520/MPC20170036

Format: PDF

Price: $25.00

A Universal Correlation for the Calculation of Heating and Cooling Time of Any Steel

Nikolai I. Kobasko

Page Count: 15

Published Online: 15 December 2017

DOI: 10.1520/MPC20170034

Format: PDF

Price: $25.00

Mechanical and Microstructural Characterization of Forged Inconel 625 Ring Gaskets for Oil and Gas Application

B. Rivolta, R. Gerosa, F. Tavasci, L. Ori Belometti

Page Count: 9

Published Online: 16 October 2017

DOI: 10.1520/MPC20170030

Format: PDF

Price: $25.00

Fracture Toughness of Glass Epoxy Laminates Using Carbon Nano Particles and ETBN Rubber

P. S. Shivakumar Gouda, Vijay Chatterjee, Siddaramaiah, P. K. Barhai, Veeresh Kumar G. B.

Page Count: 12

Published Online: 01 December 2017

DOI: 10.1520/MPC20170027

Format: PDF

Price: $25.00

Electrical and Gravimetric Estimation of the Corrosion Inhibition of Three Synthesized Cationic Surfactants N-(3-(Butylidene Amino) Propyl)-N, N-Dimethyl Alkan-1-Ammonium Bromide Derivatives in 1 M HCl

Ismail Aiad, Samy M. Shaban, Mohamed M. El-Sukkary, Moshira Y. El-Awady, E. A. Soliman

Page Count: 22

Published Online: 13 November 2017

DOI: 10.1520/MPC20170001

Format: PDF

Price: $25.00

The Effect of Spray-Formed Al22Si Coating on Wear Resistance Performance

Junfeng Zhao, Yandong Jia, Jianfei Sun, Xiaoguang Yuan, Hongxian Shen

Page Count: 11

Published Online: 28 August 2017

DOI: 10.1520/MPC20160117

Format: PDF

Price: $25.00

Evaluation on High Temperature Rheological Properties of Nano-Montmorillonite Modified Asphalt Binder

Zheng Chen, Pei Wen Hao, Ruo Nan Liu

Page Count: 11

Published Online: 10 November 2017

DOI: 10.1520/MPC20170031

Format: PDF

Price: $25.00

Corrosion Behaviors of 10CrNiCu High Strength Steel in Simulated Deep Sea Environment of High Hydrostatic Pressure and Low Dissolved Oxygen

W. Han, H. Tong, S. Wei, B. Xu, Y. Zhang, Z. Lin

Page Count: 12

Published Online: 28 April 2017

DOI: 10.1520/MPC20160122

Format: PDF

Price: $25.00

Influence of Hot Rolling Process on the Microstructure and Mechanical Properties of a Press Hardening Steel

Kuanhui Hu, Guifeng Zhou

Page Count: 10

Published Online: 26 September 2017

DOI: 10.1520/MPC20160120

Format: PDF

Price: $25.00

Investigation of Structural, Morphological, and Dynamic Mechanical Properties of Unvulcanized PDMS/Silica Compound

J. Liu, F. Li, X. He

Page Count: 13

Published Online: 03 February 2017

DOI: 10.1520/MPC20160116

Format: PDF

Price: $25.00

Mechanical Properties and Microstructure of Starch and Sisal Fiber Biocomposite Modified with Epoxy Resin

Akarsh Verma, Amit Gaur, V. K. Singh

Page Count: 21

Published Online: 08 December 2017

DOI: 10.1520/MPC20170069

Format: PDF

Price: $25.00

Hydrogen Embrittlement Susceptibility of Bainite for High Strength Steel Fasteners

F. Saliby, S. Brahimi, S. Rajagopalan, S. Yue

Page Count: 10

Published Online: 10 November 2017

DOI: 10.1520/MPC20170060

Format: PDF

Price: $25.00

A Design Optimization of the High Pressure Die Casting Process for the Fabrication of Bulk Metal Matrix Composites

B. O. Malomo, O. T. Ogunbodede, O. T. Popoola, K. M. Oluwasegun, S. A. Ibitoye, L. O. Adekoya

Page Count: 16

Published Online: 12 December 2017

DOI: 10.1520/MPC20170052

Format: PDF

Price: $25.00

The Paths of Small Fatigue Cracks in High-Strength Steels Initiated from Inclusions and Small Defects

A. Roiko, J. Solin, T. Sarikka, H. Hänninen

Page Count: 16

Published Online: 19 October 2017

DOI: 10.1520/MPC20160115

Format: PDF

Price: $25.00

Vegetable Oils as Metal Quenchants: A Comprehensive Review

R. Simencio Otero, L. Canale, G. Totten, L. Meekisho

Page Count: 78

Published Online: 13 June 2017

DOI: 10.1520/MPC20160112

Format: PDF

Price: $25.00

Effect of Heating and Thermal Deformation on Austenite Grain Size of B1500HS Boron Steel

H. Li, H. Yang, L. He, C. Zhang

Page Count: 18

Published Online: 28 April 2017

DOI: 10.1520/MPC20160114

Format: PDF

Price: $25.00

Effect of Heating and Mold Temperature on the Mechanical Properties and Microstructure of B1500HS Boron Steel

H. Li, C. Wang, L. He, C. Zhang

Page Count: 16

Published Online: 03 February 2017

DOI: 10.1520/MPC20160108

Format: PDF

Price: $25.00

Corrosion Behavior of High and Low Temperature Austempered Ductile Iron (ADI) in Iron Ore Slurry

Pooja M. Aithal, Vijeesh Vijayan, A. O. Surendranathan, K. R. Udupa, K. G. Samuel

Page Count: 10

Published Online: 26 September 2017

DOI: 10.1520/MPC20160070

Format: PDF

Price: $25.00

Analysis of Anisotropy in Turned Surfaces Using Vision Based 3D Surface Topography

Balla Srinivasa Prasad, Dora Siva Prasad, Azam Nawaz

Page Count: 15

Published Online: 06 September 2017

DOI: 10.1520/MPC20160018

Format: PDF

Price: $25.00

High-Temperature Mechanical Properties of P91 Weld Metal

B. Rivolta, F. Tavasci, R. Gerosa, J. Yenus

Page Count: 16

Published Online: 13 June 2017

DOI: 10.1520/MPC20150054

Format: PDF

Price: $25.00

Liquid-Metal Embrittlement Cracking in a Nickel-Based WeldOverlayed Boiler Tube

Stephen M. French

Page Count: 14

Published Online: 14 September 2017

DOI: 10.1520/MPC20160111

Format: PDF

Price: $25.00

Combined Structure Geometry and Anode Placement Effects on Cathodic Protection Effectiveness

Charles P. Marsh, Aidnel G. Navarro, Robert Weber, Thomas A. Carlson, Vincent F. Hock, Michael K. McInerney

Page Count: 12

Published Online: 18 August 2017

DOI: 10.1520/MPC20160101

Format: PDF

Price: $25.00

High-Temperature Erosion and its Mechanisms of Hastelloy X Superalloy under Hot Air Jet Conditions

K. G. Thirugnanasambantham, Srinivasan Natarajan

Page Count: 14

Published Online: 18 August 2017

DOI: 10.1520/MPC20160005

Format: PDF

Price: $25.00

Rheo-Dielectric Effects in Three Types of Dark Chocolate With Different Compositions

Y. Peng, X. Chen, X. Wang, N. Wang, H. Li, L.-S. Turng, Q. Wang

Page Count: 16

Published Online: 03 March 2017

DOI: 10.1520/MPC20150075

Format: PDF

Price: $25.00

Austempering and Boro-Austempering Treatments in Gray Cast Iron

Fábio Edson Mariani, Gustavo Bortoluci de Assis, Luiz Carlos Casteletti, Amadeu Lombardi Neto, George Edward Totten

Page Count: 10

Published Online: 28 August 2017

DOI: 10.1520/MPC20150038

Format: PDF

Price: $25.00

Wear Performance of Squeeze Cast ZA27–Based Composites Containing SiC, ZrO2, C, or Hybrid of SiC+C Particles

Malak Taher Abou El-khair, Ahmed Lotfy, Atef Daoud, Ahmed El-sheikh

Page Count: 20

Published Online: 28 August 2017

DOI: 10.1520/MPC20150013

Format: PDF

Price: $25.00

Wear Response of Walnut-Shell-Reinforced Epoxy Composites

M. Doddamani, G. Parande, V. Manakari, I. Siddhalingeshwar, V. Gaitonde, N. Gupta

Page Count: 25

Published Online: 22 February 2017

DOI: 10.1520/MPC20160113

Format: PDF

Price: $25.00

Thermo-Cyclic Degradation Evaluation of Sewer CIPP Resin by ASTM Standard Tests and Raman Spectroscopy

S. Alam, S. Eklund, E. Allouche, D. Ng Yun Poy

Page Count: 14

Published Online: 28 April 2017

DOI: 10.1520/MPC20160109

Format: PDF

Price: $25.00

On the Mesoscale Fracture Initiation Criterion of Heterogeneous Steels During Quenching

D. Said Schicchi, A. Caggiano, T. Lübben, M. Hunkel, F. Hoffmann

Page Count: 25

Published Online: 24 February 2017

DOI: 10.1520/MPC20160098

Format: PDF

Price: $25.00

Effect of Cooling Rate on Joint Shear Strength of Sn-9Zn Lead-Free Solder Alloy Reflowed on Copper Substrate

Sanjay Tikale, Mrunali Sona, K. Narayan Prabhu

Page Count: 9

Published Online: 21 February 2017

DOI: 10.1520/MPC20160058

Format: PDF

Price: $25.00

Mechanical Properties of Epoxy Matrix-Borosilicate Glass Hollow-Particle Syntactic Foams

S. Zeltmann, B. Chen, N. Gupta

Page Count: 16

Published Online: 05 January 2017

DOI: 10.1520/MPC20150056

Format: PDF

Price: $25.00