< Back to Issues
2015 Volume 43, Issue 6 (November 2015)
Evaluation of Sports Center Performance Using a Fuzzy Multi-Criteria Decision-Making Model
Chen-Yang Wang
Page Count: 11
Published Online: 10 October 2014
DOI: 10.1520/JTE20130235
Format: PDF
Price: $25.00
Material Characterization of Heat Shrinkable Film
Zehra Kalkan-Sevinc, Caitlin Strobel
Page Count: 9
Published Online: 04 June 2015
DOI: 10.1520/JTE20130112
Format: PDF
Price: $25.00
California Bearing Ratio of a Sub-Base Material Modified With Tire Buffings and Cement Addition
A. Cabalar, Z. Karabash
Page Count: 9
Published Online: 10 October 2014
DOI: 10.1520/JTE20130070
Format: PDF
Price: $25.00
Effect of Silver Flakes and Particle Shape on the Steady Shear Viscosity of Isotropic Conductive Adhesives
R. Durairaj, Kau Chee Leong
Page Count: 8
Published Online: 10 October 2014
DOI: 10.1520/JTE20130084
Format: PDF
Price: $25.00
Optimal Control of the Machine Repair Problem with Removable Repairman Subject to Working Breakdowns
Tseng-Chang Yen, Haitao Wu, Kuo-Hsiung Wang, Wen-Kuang Chou
Page Count: 10
Published Online: 13 October 2014
DOI: 10.1520/JTE20140008
Format: PDF
Price: $25.00
A Newly Advanced Anti-Vibration Pad With a Phase Balancer Designed by Analysis of Washing Machine Behaviors
Jin-Su Kim, Jae-Eun Jeong, Un-Chang Jeong, Jae-Eung Oh
Page Count: 13
Published Online: 10 October 2014
DOI: 10.1520/JTE20140017
Format: PDF
Price: $25.00
Experimental Study on Engineering and Thermal Properties of Mortar and Plaster Produced With Pumice Aggregate
Özgür Eren, Khaled Marar, Osman İlter, Tahir Çelik
Page Count: 11
Published Online: 10 October 2014
DOI: 10.1520/JTE20130345
Format: PDF
Price: $25.00
A Perceptual Measure of Blocking Artifact for No-reference Video Quality Evaluation of H.264 Codec
Mohamed Ben Amor, Mohamed-Chaker Larabi, Fahmi Kammoun, Nouri Masmoudi
Page Count: 11
Published Online: 10 October 2014
DOI: 10.1520/JTE20130336
Format: PDF
Price: $25.00
Experimental Validation of Fuzzy-Tuned AWPI Controller-Based Chopper Driven PMDC Motor
G. Murugananth, K. Samidurai, S. Muthukrishnan, S. Vijayan
Page Count: 12
Published Online: 10 October 2014
DOI: 10.1520/JTE20130284
Format: PDF
Price: $25.00
Failure Mode of Pedicle Screw Fixation Depends Upon the Presence, Absence, and Position of Interbody Spacers. A Pilot Study
Jeffrey Keen, Christopher Lissy, John Kirkpatrick
Page Count: 8
Published Online: 10 October 2014
DOI: 10.1520/JTE20130283
Format: PDF
Price: $25.00
A Certain Investigation on Harmonic Reduction and Design of Fuzzy Gain Scheduler for Shunt Compensation for Power Quality Enhancement
P. Balasubramaniam, S. Prabha
Page Count: 11
Published Online: 10 October 2014
DOI: 10.1520/JTE20130244
Format: PDF
Price: $25.00
Improving Corporate Governance Effects on an Enterprise Crisis Based on a New Hybrid DEMATEL with the MADM Model
Kuang-Hua Hu, Fu-Hsiang Chen, Gwo-Hshiung Tzeng, Jinn-De Lee
Page Count: 18
Published Online: 10 October 2014
DOI: 10.1520/JTE20140094
Format: PDF
Price: $25.00
A New Mixed Variable Lot Size Sampling Plan Based on Process Capability Index
Muhammad Aslam, S. Balamurali, Muhammad Azam, Chi-Hyuck Jun
Page Count: 8
Published Online: 10 October 2014
DOI: 10.1520/JTE20140054
Format: PDF
Price: $25.00
In-Situ Field Measurements and Numerical Model Identification of a Multi-Span Steel Railway Bridge
Ozden Caglayan, Kadir Ozakgul, Ovunc Tezer, Filiz Piroglu
Page Count: 15
Published Online: 10 October 2014
DOI: 10.1520/JTE20140049
Format: PDF
Price: $25.00
An Economic Design of a Group Sampling Plan for a Weibull Distribution Using a Bayesian Approach
Muhammad Aslam, Muhammad Azam, Saminathan Balamurali, Chi-Hyuck Jun
Page Count: 7
Published Online: 10 October 2014
DOI: 10.1520/JTE20140041
Format: PDF
Price: $25.00
Assessment of Process Variables that Can Impact Results of Soluble Sulfate Evaluated by the Tex-145E Method
Kevin Freese, Ala Abbas, John Senko, Teresa Cutright
Page Count: 7
Published Online: 10 October 2014
DOI: 10.1520/JTE20140027
Format: PDF
Price: $25.00
Laboratory Study to Evaluate the Influence of Reclaimed Asphalt Content on Performance of Recycled Porous Asphalt
F. Frigio, E. Pasquini, F. Canestrari
Page Count: 15
Published Online: 10 October 2014
DOI: 10.1520/JTE20140024
Format: PDF
Price: $25.00
Characteristic Point of the Relatively Quiet Period for Limestone Failure Under Uniaxial Compression
Chun-Lai Wang, Hui Lu, Fu-Li Wang, Jian-Ping Zuo, Ze-Yang An, Tian-Cai Bao, Lu Liu, Zhi-Jiang Lu, Wei-Qiang Li, Ming Luo
Page Count: 12
Published Online: 10 October 2014
DOI: 10.1520/JTE20140187
Format: PDF
Price: $25.00
Research on Malachite Green Wastewater by Flocculation and Co-Precipitation
YanHua Wang, ChanJuan Gao, ShengKe Yang
Page Count: 6
Published Online: 10 October 2014
DOI: 10.1520/JTE20140185
Format: PDF
Price: $25.00
The Effects of Sieving and Paste Content on the Setting Behavior of Mortars as Measured by ASTM C403
Chang Hoon Lee, Kenneth Clark Hover, Anna Lee
Page Count: 11
Published Online: 10 October 2014
DOI: 10.1520/JTE20140164
Format: PDF
Price: $25.00
Apply TRIZ to Improve the Molten Zinc Corrosion Tester in Steel Manufacturing
Chia-Nan Wang, Wen-Ching Lin, Tsai-Shang Huang, Hsun-Jung Chen, Van-Thanh Phan
Page Count: 11
Published Online: 10 October 2014
DOI: 10.1520/JTE20140149
Format: PDF
Price: $25.00
An Importance-Performance Analysis of Human Factors for Patient Safety Management Strategy
Cheng-Hua Wang, Yuan-Duen Lee, Hui-Lin Chou
Page Count: 9
Published Online: 10 October 2014
DOI: 10.1520/JTE20140120
Format: PDF
Price: $25.00
Assessing True TFT-LCD Process Quality in the Presence of Unavoidable Measurement Errors
Mou-Yuan Liao, Chien-Wei Wu, Chien-Hua Lin
Page Count: 8
Published Online: 10 October 2014
DOI: 10.1520/JTE20140103
Format: PDF
Price: $25.00
Hybrid Model for Evaluating Services in New Service Development
Ching-Chiang Yeh
Page Count: 12
Published Online: 10 October 2014
DOI: 10.1520/JTE20140101
Format: PDF
Price: $25.00
Compressive Testing of Ductile High-Strength Alloys
Christian Affolter, Ulrich Müller, Christian Leinenbach, Bernhard Weisse
Page Count: 9
Published Online: 11 June 2015
DOI: 10.1520/JTE20140301
Format: PDF
Price: $25.00
Reliability of Analysis Methods for Identifying Dispersive Clays
Yingqi Wei, Hong Cai, Yanfeng Wen, Jun Yan, Jianzhang Xiao
Page Count: 8
Published Online: 05 June 2015
DOI: 10.1520/JTE20140283
Format: PDF
Price: $25.00
Performance of a Diaphragm-Type Boundary Pressure Transducer Under Cyclic Loading
Trudeep Dave, Satyanarayana Dasaka
Page Count: 7
Published Online: 04 June 2015
DOI: 10.1520/JTE20140272
Format: PDF
Price: $25.00
Effect of Hardness and Surface Roughness on Slip Resistance of Rubber
Ranganathan Mohan, Bhabendra Nath Das, Raja Sundaresan
Page Count: 13
Published Online: 12 June 2015
DOI: 10.1520/JTE20140249
Format: PDF
Price: $25.00
Standardization of Oil Sorbent Performance Testing
Alireza Bazargan, Jun Tan, Gordon McKay
Page Count: 8
Published Online: 10 October 2014
DOI: 10.1520/JTE20140227
Format: PDF
Price: $25.00
Radial Strain Behaviors and Stress State Interpretation of Soil Under Direct Simple Shear
Xin Kang, Yao Cheng, Louis Ge
Page Count: 8
Published Online: 10 October 2014
DOI: 10.1520/JTE20140202
Format: PDF
Price: $25.00
Standardization of the End-Notched Flexure Test for Mode II Interlaminar Fracture Toughness Determination of Unidirectional Laminated Composites
Barry Davidson
Page Count: 14
Published Online: 04 June 2015
DOI: 10.1520/JTE20140437
Format: PDF
Price: $25.00
Evaluation of Clustering Parameters in WSN Fields Using Distributed Zone-Based Approach
B. Prabhu, S. Sophia
Page Count: 13
Published Online: 07 May 2015
DOI: 10.1520/JTE20140523
Format: PDF
Price: $25.00
Performance of Settled Bridge-Approach Slabs with Polyurethane-Foam Injection
Dar-Hao Chen, Wen Yi
Page Count: 12
Published Online: 17 June 2015
DOI: 10.1520/JTE20140431
Format: PDF
Price: $25.00
Reliability Analysis and Evaluation of Key Parts for Automobiles on the Basis of Dimensional Changes During High-Speed Operation
Min-Long Wang, Xin-Tian Liu, Yan-Song Wang, Jiao Luo
Page Count: 8
Published Online: 06 June 2015
DOI: 10.1520/JTE20140403
Format: PDF
Price: $25.00
Influence of Fabrication Method on Tensile Response of Split Hopkinson Bar-Sized Specimens
Jeremy Seidt, J. Michael Pereira, Amos Gilat
Page Count: 11
Published Online: 04 June 2015
DOI: 10.1520/JTE20140303
Format: PDF
Price: $25.00