Journal of Testing and Evaluation

Journal of Testing and Evaluation

About this journal

This journal is published in six issues per year. Some issues, in whole or in part, may be Special Issues focused on a topic of interest to our readers.

This flagship ASTM journal is a multi-disciplinary forum for the applied sciences and engineering. Published bimonthly, online only, the Journal of Testing and Evaluation presents new technical information, derived from field and laboratory testing, on the performance, quantitative characterization, and evaluation of materials. Papers present new methods and data along with critical evaluations; report users' experience with test methods and results of interlaboratory testing and analysis; and stimulate new ideas in the fields of testing and evaluation.

Major topic areas are fatigue, fracture, and creep, high/low temperature mechanical testing, fire testing, polymers, elastomers, wood, soils, metallics, additive manufacturing, pavement and construction materials, and statistics. Paper types include technical manuscripts, review articles, technical notes, discussions, closures, editorials, and book reviews. All papers are peer reviewed.

First Look Papers

Note to users: The section First Look Papers contains peer reviewed and accepted articles to be published in this journal. When the final article is assigned to an issue of the journal, the First Look Papers version will be removed from this section and will appear in the associated journal issue.

Measurements of the Limit of Detection for Electrochemical Gas Sensors

ASTM International

Page Count: 10

Published Online: 29 January 2024

DOI: 10.1520/JTE20230675

Format: PDF

Price: $25

View Abstract
Understanding the Significance of Censored Data

ASTM International

Page Count: 21

Published Online: 29 January 2024

DOI: 10.1520/JTE20230674

Format: PDF

Price: $25

View Abstract
The EPA MDL Procedure – Then and Now

ASTM International

Page Count: 14

Published Online: 21 March 2024

DOI: 10.1520/JTE20230676

Format: PDF

Price: $25

View Abstract
Early Cracking of Cementitious Materials Based on Stress Concentration Method

ASTM International

Page Count: 17

Published Online: 30 April 2024

DOI: 10.1520/JTE20230303

Format: PDF

Price: $25

View Abstract
Understanding Sources of Heavy Metals in Cannabis and Hemp: Benefits of a Risk Assessment Strategy

ASTM International

Page Count: 21

Published Online: 21 May 2024

DOI: 10.1520/JTE20230603

Format: PDF

Price: $25

View Abstract
Preventing Contamination: The Role of Good Manufacturing Practices (GMPs)

ASTM International

Page Count: 6

Published Online: 05 June 2024

DOI: 10.1520/JTE20230618

Format: PDF

Price: $25

View Abstract
Market Audits Combat Cannabis Misinformation

ASTM International

Page Count: 12

Published Online: 21 June 2024

DOI: 10.1520/JTE20230665

Format: PDF

Price: $25

View Abstract
The Elemental Composition of Hemp Flower: Sources of Elemental Impurities and Implications for Consumer Product Safety

ASTM International

Page Count: 11

Published Online: 21 June 2024

DOI: 10.1520/JTE20230621

Format: PDF

Price: $25

View Abstract
The Joint Consequence of Detection Limit Censoring and Detection Limit Determination Uncertainty

ASTM International

Page Count: 9

Published Online: 15 July 2024

DOI: 10.1520/JTE20230754

Format: PDF

Price: $25

View Abstract
Maximizing the Utilization of the Treated RAP by a Two-Step Enhancement Method in Recycled Asphalt Mixtures

ASTM International

Page Count: 18

Published Online: 19 July 2024

DOI: 10.1520/JTE20230645

Format: PDF

Price: $25

View Abstract
Enhanced Tribological Properties of Nanolubricants with Multiwalled Carbon Nanotube Additives

ASTM International

Page Count: 17

Published Online: 22 July 2024

DOI: 10.1520/JTE20230489

Format: PDF

Price: $25

View Abstract
Residual Flexural Capacity Prediction in Heat-Affected Concrete Members through Ground Penetrating Radar and Thermal Imaging

ASTM International

Page Count: 18

Published Online: 22 July 2024

DOI: 10.1520/JTE20230584

Format: PDF

Price: $25

View Abstract
Calculation Method of Interface Contact Thermal Resistance between Rock and Lining in High Rock Temperature Tunnels Considering the Lithology

ASTM International

Page Count: 18

Published Online: 22 July 2024

DOI: 10.1520/JTE20230649

Format: PDF

Price: $25

View Abstract
Review of Identification Methods for Early-Stage Cracking in Solids

ASTM International

Page Count: 26

Published Online: 22 July 2024

DOI: 10.1520/JTE20230733

Format: PDF

Price: $25

View Abstract

Issues

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

1989

1988

1987

1986

1985

1984

1983

1982

1981

1980

1979

1978

1977

1976

1975

1974

1973

Editorial Board

Editor-in-Chief

Dr. M. R. Mitchell, Mechanics & Materials, LLC, Flagstaff, AZ, USA

Editorial Board Members

  • Dr. Ali Abolmaali, Wayne State University, Detroit, MI, USA
  • Dr. Aziz Amoozegar, North Carolina State University, Raleigh, NC, USA
  • Dr. Farhad Aslani, University of Western Australia, Crawley, WA, Australia
  • Dr. Nemkumar Banthia, University of British Columbia, Vancouver, BC, Canada
  • Dr. Filippo Berto, University of Padua, Italy, and Norwegian University of Science and Technology, Trondheim
  • Dr. Krishna Prapoorna Biligiri, Indian Institute of Technology, Tirupati, Andhra Pradesh, India
  • Dr. Andrew F. Braham, University of Arkansas, Fayetteville, AR, USA
  • Dr. Andreas J. Brunner, Zürich, Switzerland
  • Professor Andrea Carpinteri, University of Parma, Parma, ITALY
  • Dr. Wen-Ruey Chang, Liberty Mutual Research Institute for Safety, Hopkinton, MA, USA
  • Dr. Dar Hao Chen, Texas A&M University, College Station, TX, USA
  • Dr. Tong Cui, Qualcomm Packaging, San Diego, CA, USA
  • Mr. John S. Dick, Alpha Technologies, Akron, OH, USA
  • Prof. Ying Fang, Xiamen University, Xiamen, China
  • Dr. Alessandro Gardi, RMIT University, Bundoora, VIC, Australia
  • Dr. Piotr Gas, AGH University of Science and Technology, Krakow, Poland
  • Dr. Yu-Ning Louis Ge, National Taiwan University, Taipei, Taiwan
  • Dr. Meng Guo, Beijing University of Technology, Beijing, China
  • Dr. Menghuan Guo, Shenzhen University, Shenzhen, China 
  • Dr. Rajeev Kumar Gupta, NC State University, Raleigh, NC, USA
  • Dr. Chanjuan (Crystal) Han, Shanghai Jiao Tong University, Shanghai, China 
  • Prof. Jim Hartman, AZGaitero Engineering, Tempe, AZ, USA
  • Dr. Leila Hashemian, University of Alberta, Edmonton, Alberta, Canada
  • Dr. Maryam Hojati, University of New Mexico, Albuquerque, NM, USA 
  • Mr. Hui-Min (Hui) Huang, National Institute for Standards and Technology (NIST), Gaithersburg, MD, USA
  • Dr. ShanShan Jin, Beijing University of Civil Engineering and Architecture, Beijing, China 
  • Dr. Amin Joodaky, Michigan State University, East Lansing, MI, USA
  • Dr. Sreeramesh Kalluri, Ohio Aerospace Institute, Brook Park, OH, USA
  • Dr. Sivakumar Kandasami, Larsen & Toubro Construction, Chennai, India
  • Dr. Xiaoming Huang, Southeast University, Nanjing, China
  • Dr. Xin Kang, Hunan University, Hunan, Changsha, China
  • Dr. Vistasp Karbhari, University of Texas at Arlington, Arlington, TX, USA
  • Dr. Behnoud Kermani, The Transtec Group, Inc., Enola, PA
  • Dr. Yong-Rak Kim, University of Nebraska-Lincoln, Lincoln, NE, USA
  • Dr. Young Hoon Kim, University of Louisville, Louisville, KY, USA
  • Dr. Eva Lantsoght, Delft University of Technology, Delft, Netherlands, and Universidad San Francisco de Quito
  • Dr. Mohammad J. Mahtabi, University of Tennessee at Chattanooga, Chattanooga, TN, USA
  • Dr. Susan M. Marvin, Federal Bureau of Investigation Laboratory, Quantico, VA, USA
  • Douglas C. Meier, National Institute of Standards and Technology, Gaithersburg, MD, USA
  • Dr.-Ing. Miomir Miljković, University of Niš, Niš, Serbia
  • Dr. Xueqian Ni, Central South University, Changsha, Hunan, China 
  • Mr. Thomas F. O’Connor, Milan, MI, USA
  • Dr. Božidar V. Popović, University of Montenegro, Podgorica, Montenegro
  • Dr. Luis Reis, Instituto Superior Técnico, Lisbon, Portugal
  • Dr. Elena Romeo, University of Parma, Parma, Italy
  • Dr. Gourab Saha, National Institute of Technology Rourkela, Sundargarh, India
  • Dr. Xiomara Sanchez Castillo, University of New Brunswick, Fredericton, NB, Canada 
  • Dr. Rajarshi Saha, Bridgelux, Inc., Livermore, CA
  • Dr. Scott A. Schroeder, Exponent, Los Angeles, CA, USA
  • Dr. Steven J. Shaffer, Shaffer Tribology Consulting, Campbell, CA, USA
  • Dr. Suraj Sharma, University of Georgia, Athens, GA, USA
  • Dr. Ranganath K. Shastri, Plastics Solutions, Midland, MI, USA
  • Dr. Punith V. Shivaprasad, Clemson University, Clemson, SC, USA
  • Dr. Mark Sidebottom, Miami University, Oxford, OH, USA
  • Dr. Cy (Chor-yiu) Sin, National Tsing Hua University, Hsinchu, Taiwan, R.O.C
  • Dr. C. Elizabeth Stokes, Mississippi State University, Starkville, MS, USA
  • Dr. Stein Sture, University of Colorado at Boulder, Boulder, CO, USA
  • Dr. Xiao Tan, Hohai University, Nanjing, China 
  • Dr. Julian Tao, University of Akron, Akron, OH, USA
  • Dr. Ingrid Tomac, University of California, San Diego, San Diego, CA
  • Dr. Blanka Tomkova, Technical University of Liberec, Liberec, Czech Republic
  • Dr. Sabrina Vantadori, University of Parma, Parma, Italy
  • Dr. Sandra Varnaitė-Žuravliova, Center for Physical Sciences and Technology, Kaunas, Lithuania
  • Dr. Matthieu Vignes, Massey University Manawatu, Palmerston North, New Zealand
  • Dr. Hao Wang, Rutgers, The State University of New Jersey, Piscataway, NJ
  • Dr. Jinfeng Wang, Zhejiang University, Hangzhou, China
  • Dr. Shuying Wang, Central South University, Hunan, China
  • Dr. Xuefei (Sophie) Wang, Hebei University of Technology, Tianjin, China 
  • Dr. Shaopeng Wu, Wuhan University of Technology, Wuhan, China
  • Dr. Shenghua Wu, University of South Alabama, Mobile AL, USA
  • Professor Feipeng Xiao, Clemson University, Clemson, SC, USA
  • Dr. Yang Xiao, Chongqing University, Chongqing, China
  • Dr. Aref Yadollahi, Purdue University Northwest, Hammond, IN, USA 
  • Dr. Fangwei Yu, Chinese Academy of Sciences, Chengdu, China
  • Dr. Xiong Yu, Case Western Reserve University, Cleveland, OH, USA
  • Professor Menglan Zeng, Hunan University, Changsha, P.R. China
  • Dr. Henglong Zhang, Hunan University, Changsha, China
  • Dr. Xijin (Emma) Zhang, George Mason University, Fairfax, VA, USA 

Author Instructions

  • Submit your paper online using the Online Paper Submittal tab.
  • You must accept the ASTM copyright transfer agreement.
  • Submit only original work. Previously published papers are never acceptable.
  • Author Instructions for best practices and the ASTM Style Manual can be found here.
  • Provide complete references so all authors get credit for their work and papers are accepted by indexing and literature search services.
  • Written permission from the copyright holder must be submitted for any quotes, tables, or figures with appropriate credit.
  • All artwork will appear in color online and in black and white if printed so be sure your color materials are understandable in black and white. This includes text so don’t refer to the “blue” area but rather the dark area, bold line, dotted line, etc.
  • All papers are reviewed by at least two anonymous peer reviewers.
  • Your approved, peer-reviewed paper will be copy-edited and formatted. You will be asked to approve the final version.
  • Upon approval of the edited version, your paper will be published in the electronic journal.

Subscription Information

Individual*

How does it work?

You receive a User ID and Password to login to your subscription.

Online only: $318

*Individual subscriptions provide single user access for 12 months via username and password.

Individual article downloads available for $25 directly from the website

Institutional**

How does it work?

Access is by IP address.

Online only: $492

Please contact Sales or call 1-877-909-ASTM.
**Institutional subscriptions provide single site (one geographic location) access for 12 months via IP address.

For Multi-site subscription and pricing, please contact Sales or call 1-877-909-ASTM.

Subscription Period

This subscription ends 12 months from the day your order is processed.

Read ASTM License Agreement
Indexed In
Impact Factor 1.2
Five Year Impact Factor 1.1

Science Citation Index®

Science Citation Index Expanded™

Chemical Abstracts Service

Current Contents®/ Engineering Computing & Technology

EI COMPENDEX®

Google Scholar

Scopus

Details
ISSN: 0090-3973
E-ISSN: 1945-7553
Coden: JTEVAB