All Quality Special Technical Publications

Search within Quality


STP159820160080: Sensitivity Study on Parameters that Influence Automated Slope Determination - 01 April 2017

STP159820160084: Practical and Technical Challenges of the Exhaust System Fatigue Life Assessment Process at Elevated Temperature - 01 April 2017

STP157620140020: International Round Robin Test on Master Curve Reference Temperature Evaluation Utilizing Miniature C(T) Specimen - 30 October 2014

STP157820130122: Quality Control Using Inferential Statistics in Weibull-based Reliability Analyses - 30 September 2014

STP157820130126: The Scaling of the Strength of Nuclear Graphite with Particular Emphasis on Statistical Aspects and Implications for Testing - 30 September 2014

STP157820130125: Size Effect on the Fracture Properties of Nuclear Graphite - 30 September 2014

STP157820130123: Effect of Test Specimen Size on Graphite Strength - 30 September 2014

STP157820130147: Applicability and Limitations of Miniature Specimens for Properties Determination of Fine-Grained Graphite - 30 September 2014

STP157820130127: Small-Scale Approaches to Evaluate the Mechanical Properties of Quasi-Brittle Reactor Core Graphite - 30 September 2014

STP157120130117: Analysis Round Robin Results on the Linearity of Fracture Toughness Test Data - 28 August 2014

STP156520120218: Measurement Precision of Respirable Dust and Silica in Workplace Conditions - 31 December 2013

STP156820130003: Sampling, Machining, and Testing of Naturally Frozen Soils - 01 October 2013

STP157020130031: Quality Control Considerations for Soil Gas Sample Collection Using Direct Push and Hand-Sampling Equipment - 30 September 2013

STP103987: Dislocation Bias Calculations in Metals Using a Combined Finite-Element Rate-Theory Approach - 01 January 2013

STP104267: A Universal Bivariate Weibull Model for Static and Dynamic Fatigue Reliability Forecasting - 01 October 2012

STP104516: Advanced Methods for Assessing the Quality of Bearing Steels - 01 October 2012

STP104519: Monte Carlo Comparison of Weibull Two and Three Parameters in the Context of the Statistical Analysis of Rolling Bearings Fatigue Testing - 01 October 2012

STP49371S: Addressing the Issue of Fuel Filter Fouling with Recent Changes in Fuel Quality - 01 January 2011

STP1533-EB: Surface and Dermal Sampling - 01 January 2011

STP49746S: Improving the Confidence Level in Lead Clearance Examination Results through Modifications to Dust Sampling Protocols - 01 January 2011

STP49751S: Evaluation of Asbestos in Dust on Surfaces by Micro-Vacuum and Wipe Sampling - 01 January 2011

STP49752S: Use of the ASTM Inter-Laboratory Studies (ILS) Program in Developing Precision Data for ASTM D5755 — Asbestos in Dust by Microvacuum Sampling - 01 January 2011

STP49758S: Use of Direct Reading Surface Sampling Methods for Site Characterization and Remediation of Methamphetamine Contaminated Properties - 01 January 2011

STP49742S: Indoor Allergen Surface Sampling Methods and Standards: A Review of the Theory and the Practice - 01 January 2011

STP49740S: Review of Standards for Surface and Dermal Sampling - 01 January 2011

STP47761S: Qualitative Sampling of the Building Envelope for Water Leakage - 01 January 2009

STP1465-EB: Bearing Steel Technology-Advances and State of the Art in Bearing Steel Quality Assurance: 7th Volume - 01 January 2007

STP41634S: A Review of Swedish Bearing Steel Manufacturing and Quality Assurance of Steel Products - 01 January 2007

STP41642S: Statistical Analysis of Nonmetallic Inclusions for the Estimation of Rolling Contact Fatigue Range and Quality Control of Bearing Steel - 01 January 2007

STP45504S: Probabilistic Analysis of the Creep Crack Growth Rate of Type 316LN Stainless Steel by the Monte Carlo Simulation - 01 January 2007

STP45445S: Precision Neutron Total Cross-Sectional Measurements for Natural Carbon at Reactor Neutron-Filtered Beams - 01 January 2007

STP45451S: Coarse-Mesh Adjoint Biasing of a Monte Carlo Dose Calculation - 01 January 2007

STP45377S: Quality Assurance Program for Soldering Copper Roofs - 01 January 2007

STP1473-EB: Beryllium: Sampling and Analysis - 01 January 2006

STP37651S: Fires in P-3 Aircraft Oxygen Systems - 01 January 2006

STP37652S: Review, Analysis, and Hazard Mitigation of the Life-Support Oxygen System on Royal Australian Air Force P-3 Orion Aircraft - 01 January 2006

STP37655S: Electrical Arc Ignition Testing of Spacesuit Materials - 01 January 2006

STP37656S: Proficiency Testing for Evaluating Aerospace Materials Test Anomalies - 01 January 2006

STP37657S: Comparison of Carbon Dioxide and Helium as Fire Extinguishing Agents for Spacecraft - 01 January 2006

STP37670S: Seawater Quality, Suspended Solids, and Settling Particles in the Wood Pool Area of Shimizu Port, Japan - 01 January 2006

STP37721S: Chapter 3: Techniques, Procedures, and Practices of Sampling of Concrete and Concrete-Making Materials - 01 January 2006

STP37722S: Chapter 4: Statistical Considerations in Sampling and Testing - 01 January 2006

STP12003S: Sampling and Analysis of Mercury in Crude Oil - 01 January 2005

STP11987S: Zen and the Art (or is it Science) of a Perfect Analysis - 01 January 2005

STP12554S: Quality Control Guidelines for Factory Applied Structural Silicone Glazing - 01 January 2004

STP12199S: An Assessment of Current GCL Manufacturing Quality Control and On-Site Acceptance Testing Standard of Practice - 01 January 2004

STP11551S: Deep-Freeze Sampling Methods for Soft Sediments - 01 January 2003

STP11552S: Quality Evaluation of Eutrophic Sediments at St. Augustin Lake, Quebec, Canada - 01 January 2003

STP11042S: Inter-Laboratory Study to Establish the Precision and Bias of Bond-Wrench Testing under ASTM C 1329 and C 1357 - 01 January 2002

STP11033S: Emley Plasticity Testing: First Steps to a Precision and Bias Statement - 01 January 2002

STP11053S: PC-Based Stress-Measuring System for On-Line Quality Control of Tempered and Heat-Strengthened Glass - 01 January 2002

STP38276S: Problems and Possibilities with Bottle Sampling for Assessment of Particle Concentration - 01 January 2001

STP13632S: Activity Determination with High Precision for Component Disposal - 01 January 2001

STP10700S: Effects of TMDSC Variables on the Observed Glass Transitions of Elastomers- a Statistical Analysis - 01 January 2001

STP10546S: The Determination of Bias Factor Stress Dependence from Experimental Data on Irradiation Creep and Stress-Affected Swelling in Austenitic Stainless Steels - 01 January 2001

STP1408-EB: Isocyanates: Sampling, Analysis, and Health Effects - 01 January 2001

STP10458S: Laboratory Comparison of Sampling Methods for Reactive Isocyanate Vapors and Aerosols - 01 January 2001

STP10464S: Field Evaluation of a Gravimetric Sampling Method as a Screening Tool for the Monitoring of Airborne Isocyanates in Paint-Spray Operations - 01 January 2001

STP12388S: Bias and Precision of To Values Determined Using ASTM Standard E 1921-97 for Nuclear Reactor Pressure Vessel Steels - 01 January 2000

STP13456S: Sources of Systematic Bias Reflected in an ASTM Collaborative Study on Water in Oil Measured by the Karl Fischer Method - 01 January 2000

STP14415S: Design of a Relative Risk Model Regional-Scale Risk Assessment with Confirmational Sampling for the Willamette and McKenzie Rivers, Oregon - 01 January 2000

STP15278S: Construction Quality Control Testing of Compacted Fills: Optimum Moisture-Density Values - 01 January 2000

STP15291S: Quality Control of Earth Fills Using Time Domain Reflectometry (TDR) - 01 January 2000

STP15292S: Quality Control of Compacted Layers with Field and Laboratory Seismic Testing Devices - 01 January 2000

STP12514S: An Analysis of Autoignition Temperature Round Robin Test Data - 01 January 2000

STP10259S: Passive Sampling Devices (PSDs) as Biological Surrogates for Estimating the Bioavailability of Organic Chemicals in Soil - 01 January 2000

STP38256S: Antifreeze: From Glycol to a Bottle on the Shelf—Manufacturing and Quality Control Considerations - 01 January 1999

STP42349S: Some Statistical Principles in Asbestos Measurement and Their Application to Dust Sampling and Analysis - 01 January 1999

STP42353S: Incorporating Dust Sampling into the Asbestos Management Program - 01 January 1999

STP42329S: Asbestos Measurement in Soils and Bulk Materials: Sensitivity, Precision, and Interpretation — You can have it All - 01 January 1999

STP15818S: Quality Control in the Application of Flow Cytometry to Studies of Environmentally-Induced Genetic Damage - 01 January 1999

STP15821S: Impact of Sugar-Processing Effluents and Domestic Wastes on the Water Quality of Mingoala River in Mbandjock, Cameroon - 01 January 1999

STP1378-EB: Hot Mix Asphalt Construction: Certification and Accreditation Programs - 01 January 1999

STP13928S: Asphalt Technician Certification: The Rocky Mountain Way - 01 January 1999

STP13927S: New England Transportation Technician Certification Program (NETTCP): A Regional Approach - 01 January 1999

STP13929S: The AASHTO Accreditation Program: Serving the Hot Mix Asphalt Industry - 01 January 1999

STP13930S: Experiences with Bituminous Paving Technician Training and Certification in Pennsylvania - 01 January 1999

STP13931S: A First-Year Summary of the Arkansas Hot-Mix Asphalt Technician Certification Program - 01 January 1999

STP13932S: Certification and Accreditation Programs: A Contractor's Perspective - 01 January 1999

STP13933S: Basic Elements in the Design of a Certification Program for Hot-Mix Asphalt Construction Personnel - 01 January 1999

STP13934S: Lake Land College / Illinois Department of Transportation: Quality Control / Quality Assurance Training Program — Development and Implementation - 01 January 1999

STP13935S: South Carolina's Experience with Certification and Accreditation - 01 January 1999

STP12107S: Quality Control Procedures to Prevent Water Leakage Through Windows - 01 January 1998

STP12109S: Building Exterior Wall Water Infiltration Control Using Quality Assurance Programs - 01 January 1998

STP12167S: Quality Control Associated with use of Semipermeable Membrane Devices - 01 January 1998

STP12154S: Establishment of Quality Assurance Procedures for Aquatic Toxicity Testing with the Nematode Caenorhabditis elegans - 01 January 1998

STP12344S: Low-Cycle Fatigue Testing of Tubular Material Using Non-Standard Specimens - 01 January 1998

STP1337-EB: Effects of Product Quality and Design Criteria on Structural Integrity - 01 January 1998

STP12350S: The Specification of Crack Arrest Properties for Storage Tanks: Background and Recommendations - 01 January 1998

STP12341S: Consideration of Safety Factors in the Life Extension Modelling of Components Operating at High Temperatures - 01 January 1998

STP13288S: Stormwater Runoff Water Quality Evaluation and Management Program for Hazardous Chemical Sites: Development Issues - 01 January 1998

STP15732S: High-Precision Determination of 234U/238U Activity Ratios in Natural Waters and Carbonates by ICPMS - 01 January 1998

STP15659S: Water Quality Effects of Tire Chip Fills Placed Above the Groundwater Table - 01 January 1997

STP11806S: Manufacturing Quality Control and Specification Criteria for Geosynthetic Clay Liners - 01 January 1997

STP12253S: An Overview of Metals Permitting Alternatives the Importance of Clean Chemistry Techniques for Trace Metal Sampling of Domestic Wastewater and Paper Mill Treated Effluents and Receiving Waters - 01 January 1997

STP13821S: Estimation of Bias in the Oxidative Induction Time Measurement by Pressure DSC - 01 January 1997

STP14145S: Field Quality Control Strategies for Assessing Solidification/Stabilization - 01 January 1996

STP15585S: Current Status of Environment Canada's Guidance on Control of Test Precision Using a Spiked Sediment Toxicity Test: What to Spike and How? - 01 January 1996

STP16015S: Assessing Chemical Data Quality for Risk Assessment Through Data Validation - 01 January 1996

STP16017S: Data Quality Objectives for Two Risk Assessments at Hanford - 01 January 1996

STP1282-EB: Sampling Environmental Media - 01 January 1996

STP16568S: ASTM Sampling Methods and Analytical Validation for Lead in Paint, Dust, Soil, and Air - 01 January 1996

STP16569S: Municipal Solid Waste Sampling and Characterization - 01 January 1996

STP16573S: Cone Penetrometer Testing for Characterization and Sampling of Soil and Groundwater - 01 January 1996

STP16574S: The Multiport Sampler: An Innovative Sampling Technology - 01 January 1996

STP16561S: A Common Sense Sampling Strategy to Expedite Hazardous Waste Site Cleanup - 01 January 1996

STP16562S: A Systematic Approach to Representative Sampling in the Environment - 01 January 1996

STP16584S: Use of Phased Approach to Sampling Soil and Sediment for Site Characterization at the Pantex Plant in Amarillo, Texas - 01 January 1996

STP16563S: Worker Exposure During Environmental Sampling: The Hazards Involved - 01 January 1996

STP16116S: A Bayesian/Geostatistical Approach to the Design of Adaptive Sampling Programs - 01 January 1996

STP16119S: Stochastic Simulation of Space-Time Series: Application to a River Water Quality Modelling - 01 January 1996

STP16123S: Geostatistical Simulation of Rock Quality Designation (RQD) to Support Facilities Design at Yucca Mountain, Nevada - 01 January 1996

STP15619S: Biopollutant Sampling and Analysis of Indoor Surface Dusts: Characterization of Potential Sources and Sinks - 01 January 1996

STP16158S: Report on Joint SSPC/ASTM Round Robin - 01 January 1996

STP16162S: The Use of Ranked Versus Rated Data in the Evaluation of Weathered Specimens or Material - 01 January 1996

STP16150S: Factors Influencing the Reliability of Results in Accelerated Weathering Tests - 01 January 1996

STP1299-EB: Quality Management of Hot Mix Asphalt - 01 January 1996

STP16311S: Performance Based Field Quality Control/Quality Assurance for Asphalt-Aggregate Mixes - 01 January 1996

STP16312S: Consideration of Hot Mix Asphalt Thermal Properties During Compaction - 01 January 1996

STP16304S: Evaluation and Modification of a Statistical Specification for Hot Mix - 01 January 1996

STP16305S: Field Management of Hot Mix Asphalt Volumetric Properties - 01 January 1996

STP16303S: Minnesota's Quality Management Program “A Process for Continuous Improvement” - 01 January 1996

STP16306S: Design and Implementation of a Dynamic Quality Management System for HMA: A Case Study - 01 January 1996

STP16307S: QC/QA Specifications—A Texas Producer's Experiences - 01 January 1996

STP16308S: The Use of Falling Weight Deflectometer in Asphalt Pavement Construction Quality Control - 01 January 1996

STP16309S: Quality Management in Asphalt Pavement Construction - 01 January 1996

STP16310S: Use of SHRP-Developed Testing in QC/QA Programs on Asphalt Concrete for Highway and Airfield Pavements - 01 January 1996

STP19863S: Chemical and Toxicological Evaluation of Water Quality Following the Exxon Valdez Oil Spill - 01 January 1995

STP12978S: Sampling and Analysis of Lead in Dust and Soil for the Comprehensive Abatement Performance Study (CAPS) - 01 January 1995

STP12979S: Investigation of Adhesive Lift Sampling Technology Used for the Evaluation of Lead in Surface Dust - 01 January 1995

STP15980S: Ultra-Low Level (pg/L) Actinide Determinations and Superior Isotope Ratio Precisions by Quadrupole ICP-MS - 01 January 1995

STP16009S: Critical Analysis of Sediment Quality Criteria and Hazard/Risk Assessment Tools - 01 January 1995

STP23899S: Impact of Leakage on Precision in Low Gradient Flexible Hall Permeability Testing - 01 January 1994

STP23900S: Influence of Polymers on the Hydraulic Conductivity of Marginal Quality Bentonite-Sand Mixtures - 01 January 1994

STP25190S: Hydroxylapatite-Coatings for Non-Precision Implant Placements - 01 January 1994

STP25179S: Techniques for the Characterization and Quality Control of Hydroxyapatite Raw Materials and Coatings - 01 January 1994

STP1209-EB: Quality and Statistics: Total Quality Management - 01 January 1994

STP13197S: Overview of Technical and Social Systems in Organizational Change - 01 January 1994

STP13198S: Realization of the Projected Impact of a Chemistry Workflow Management System at Bridgeport Hospital - 01 January 1994

STP13199S: Implementation of a Quality Assurance System in Clothing Establishments - 01 January 1994

STP13200S: Application of Statistical Quality Assurance Techniques to Continuous Process Analyzer Systems for On-Line Product Quality Certification - 01 January 1994

STP13201S: Statistical Evaluation of Additive Effectiveness in Asphalt Paving Mixtures - 01 January 1994

STP13189S: Standardization of Policies and Procedures at Commercial Testing & Engineering Co. - 01 January 1994

STP13188S: International Competitiveness and Business Excellence - 01 January 1994

STP13190S: Statistical Measurement Control - 01 January 1994

STP13191S: Where Real Product Quality Starts - 01 January 1994

STP13192S: A Sampling Plan for Commercial Product Testing and Verification Activities - 01 January 1994

STP13193S: Analyzing Interlaboratory Data According to ASTM Standard E691 - 01 January 1994

STP13194S: All You Ever Wanted to Know About Control Charts: But Never Asked - 01 January 1994

STP13195S: Quality Control of Powder Metallurgy (P/M) Parts for Magnetic Applications - 01 January 1994

STP13196S: The Transition from Sampling to SPC - 01 January 1994

STP12642S: A Summary of Ono's Method for Cement Quality Control with Emphasis on Belite Color - 01 January 1994

STP13946S: Sampling Rate Effects in Automated Fatigue Crack Growth Rate Testing - 01 January 1994

STP13940S: A Sampling of Mechanical Test Automation Methodologies Used in a Basic Research Laboratory - 01 January 1994

STP36402S: Techniques, Procedures, and Practices of Sampling of Concrete and Concrete-Making Materials - 01 January 1994

STP36403S: Statistical Considerations in Sampling and Testing - 01 January 1994

STP17996S: Comprehensive Quality Control in Standards Text Production and Retrieval - 01 January 1993

STP15945S: Riprap Quality Criteria in Standard Specifications and Engineering Guidance - 01 January 1993

STP19254S: Quality Control in Aquatic Toxicity Testing Programs: Evaluation of Copper and Hexavalent Chromium As Reference Toxicants - 01 January 1993

STP15957S: “Witness Coupon” Testing as a Possible Method for Validating Precision Cleaned Hardware in Oxygen Systems - 01 January 1993

STP15947S: Experience and Initiatives in Replacing Ozone Depleting Chemicals for Precision Cleaning at the U.S. Air Force's Aerospace Guidance and Metrology Center - 01 January 1993

STP15951S: Aqueous Nonvolatile Residue Validation of Precision Cleaned Hardware - 01 January 1993

STP15953S: Methods for Using Water Impingement in Lieu of Chlorofluorocarbon 113 for Determining the Non-Volatile Residue Level on Precision Cleaned Hardware - 01 January 1993

STP24825S: CVD Multiple-Layer Coatings on 9Cr18 Steel and Its Application for High-Precision Ball Bearings - 01 January 1993

STP14899S: Statistical Analysis of Profilometric Sampling for Roughness Parameters - 01 January 1993

STP13151S: Correlation with Fetax of a Cellular Bioassay -Cell Health Assay of Water Quality -CHAWQ - 01 January 1993

STP13143S: Quality Assurance in Programs Regulated by the U.S. Environmental Protection Agency - 01 January 1993

STP13170S: Experimental Versus Empirical Approaches to Setting Water Quality Objectives - 01 January 1993

STP19126S: Quality Assurance in Soil Gas Surveys: False Positive Acetone Identifications at a Codisposal Site - 01 January 1992

STP19128S: Delineation of Lithology and Groundwater Quality in a Complex Fluvial Estuarine Depositional Zone - 01 January 1992

STP19129S: Use of Piezometric Cone Penetration Testing and Penetrometer Ground Water Sampling for Volatile Organic Contaminant Plume Detection - 01 January 1992

STP19141S: Assessing the Usability of Historical Water-Quality Data for Current and Future Applications - 01 January 1992

STP19143S: Considerations in Selecting Indicator Parameters for the Statistical Evaluation of Ground-Water Quality - 01 January 1992

STP17854S: FTIR Techniques for the Analysis of Coating Problems: Solid Sampling Accessories - 01 January 1992

STP19567S: Development of an In-Line Grout Meter for Improved Quality Control - 01 January 1992

STP24205S: Accuracy and Precision of Well Casing Surveys and Water-Level Measurements and Their Impact on Water-Level Contour Maps - 01 January 1992

STP1129-EB: Slurry Walls: Design, Construction, and Quality Control - 01 January 1992

STP19736S: Quality Control of Slurry Cutoff Wall Installations - 01 January 1992

STP19721S: Slurry Walls-Construction Quality Control - 01 January 1992

STP19746S: Quality Control in Construction of Structural Diaphragm Wall Joints - 01 January 1992

STP15045S: Simulation, Precision and Decision in JFTOT Testing - 01 January 1992

STP1075-EB: Waste Testing and Quality Assurance: Third Volume - 01 January 1991

STP25479S: A Case Study of the Use of the “Summa Canister” for Passive “Off-Gas” Vent Sampling and Analysis - 01 January 1991

STP25487S: Sampling Protocol Development for Hazardous Waste - 01 January 1991

STP25488S: Quality Control in Field Sampling Methods - 01 January 1991

STP25489S: Reporting Environmental Data of Known Quality - 01 January 1991

STP25491S: Early Warning Report: Automated Checking of QC Data - 01 January 1991

STP25492S: Detection Limits: For Linear Calibration Curves with Increasing Variance and Multiple Future Detection Decisions - 01 January 1991

STP25493S: Quality Assurance as Viewed by a Data User - 01 January 1991

STP25468S: An Advanced Autosampling System for Gas Chromatography-Mass Spectrometry - 01 January 1991

STP25051S: Vibro Replacement - Design Criteria and Quality Control - 01 January 1991

STP17604S: The Role of Sediment-Trace Element Chemistry in Water-Quality Monitoring and the Need for Standard Analytical Methods - 01 January 1991

STP17286S: The Projected Change in the Development of Specifications and Guides Describing Water Quality Over the Next Ten Years - 01 January 1991

STP17623S: Suggested Microbiological Water Quality Tests for Developing Countries and Rural and Isolated North American Communities - 01 January 1991

STP23563S: An Ecological Impact Assessment Framework for Decision-Making Related to Sediment Quality - 01 January 1991

STP23610S: A Simple High Precision Extinction Method for Measuring Refractive Index of Transparent Materials - 01 January 1991

STP23307S: Deterioration of Thermal Insulation Properties of Extruded Polystyrene: Classification and Quality Control System in Sweden - 01 January 1990

STP24622S: Detection of the Initiation and Growth of Cracks Using Precision, Continuous Modulus Measurements - 01 January 1990

STP24664S: The Leading Factor Transient Regime of Void Swelling: The Role of Bias Vacancy Flow Around Growing Precipitates - 01 January 1990

STP17194S: Analysis of Atmospheric Particulate Samples via Instrumental Neutron Activation Analysis - 01 January 1990

STP17196S: Sampling and Analysis of Nitrogen Dioxide and Respirable Particles in the Indoor Environment - 01 January 1990

STP17184S: Assessing the Performance of Ambient Air Samplers for Volatile Organic Compounds - 01 January 1990

STP23402S: Sorption of Aromatic Hydrocarbons by Materials Used in Construction of Ground-Water Sampling Wells - 01 January 1990

STP23407S: Water Level Monitoring—Achievable Accuracy and Precision - 01 January 1990

STP23398S: Experimental Screen Design for More Sediment-Free Sampling - 01 January 1990

STP23393S: Methods for Sampling Fluids in the Vadose Zone - 01 January 1990

STP1062-EB: Waste Testing and Quality Assurance: Second Volume - 01 January 1990

STP18978S: A Comparison Between Thermospray and Particle Beam LC/MS for Environmental Applications - 01 January 1990

STP18979S: Development of an Environmental Monitoring Technique Using Synchronous Excitation (SE) Fluorescence Spectroscopy - 01 January 1990

STP18981S: Automation of Regional Data Validation - 01 January 1990

STP18982S: Preparation of Natural Matrix Type Samples for Performance Evaluation of Resource Conservation and Recovery Act (RCRA) Contract Laboratories - 01 January 1990

STP18954S: Canister-Based Samplers for Volatile Organics - 01 January 1990

STP18983S: Data Consolidation and Reporting for the Analytical Laboratory - 01 January 1990

STP24980S: Quality Control of Mortars: Cubes vs. Cylinders - 01 January 1990

STP25336S: Mycotoxins and Indoor Air Quality - 01 January 1990

STP25375S: Soil Organic Matter Sensing for Precision Herbicide Application - 01 January 1990

STP19060S: A Bioindicator System Assessing Air Quality Within Minnesota - 01 January 1990

STP19064S: Protocol for Evaluating Soil Contaminated with Fuel or Herbicide - 01 January 1990

STP20105S: Use of the Blue Mussel, Mytilus edulis, in Water Quality Toxicity Testing and In Situ Marine Biological Monitoring - 01 January 1990

STP1097-EB: Statistical Sampling: Past, Present and Future Theoretical and Practical - 01 January 1990

STP25440S: Skip-Lot Sampling: History and Perspective - 01 January 1990

STP25441S: Suspension Systems for Today's Manufacturing Environment - 01 January 1990

STP25442S: On the Robustness of a Class of Continuous Sampling Plans under Certain Types of Process Models - 01 January 1990

STP25443S: Quick Switching Systems in Acceptance Sampling - 01 January 1990

STP25444S: Sampling Terms of Reference - 01 January 1990

STP25439S: Acceptance Sampling - Past, Present, and Future - 01 January 1990

STP25445S: Sampling Plans with Low Consumers' Risk - 01 January 1990

STP25446S: Gy's Particulate Material Sampling Theory - 01 January 1990

STP17250S: Estimating Water Quality from Geophysical Logs - 01 January 1990

STP26489S: Laser-Induced Failure in Biased Silicon Avalanche Photodiodes - 01 January 1990

STP26493S: Ultra-Precision Grinding of LHG-8 Laser Glass and Laser Damage Thresholds - 01 January 1990

STP10159S: Application of a Multisorbent Sampling Technique for Investigations of Volatile Organic Compounds in Buildings - 01 January 1989

STP1025-EB: Factors That Affect the Precision of Mechanical Tests - 01 January 1989

STP24016S: Accuracy of Multiaxial Fatigue Testing with Thin-Walled Tubular Specimens - 01 January 1989

STP24017S: Requirements for the Permitted Size of the Alignment Errors of Load Frames for Fatigue Testing and a Proposal for a Relevant Measuring Method - 01 January 1989

STP24018S: Checking and Improvement of the Alignment of Flat Specimen Gripping Devices - 01 January 1989

STP24019S: Development of an Instrumented Device to Measure Fixture-induced Bending in Pin-loaded Specimen Trains - 01 January 1989

STP24020S: End Constraint and Alignment Effects in Three- and Four-Point Reverse Bending Tests - 01 January 1989

STP24021S: Influence of Machine Type and Strain Rate Interaction in Tension Testing - 01 January 1989

STP24022S: Accuracy of High-Temperature, Constant Rate of Strain Flow Curves - 01 January 1989

STP24023S: Simple Stress Sensor: Utilizing of Stretcher Strains - 01 January 1989

STP24025S: Weight Loss Technique for Measurement of Wear of Polymeric Orthopedic Implants - 01 January 1989

STP24026S: A Survey of the Experimental Determination of Precision in Materials Research - 01 January 1989

STP24009S: Results of an ASTM E-4 Round-Robin on the Precision and Bias of Measurements of Microindentation Hardness Impressions - 01 January 1989

STP24010S: An Alternative Method for Measuring Microindentations - 01 January 1989

STP24011S: Factors That Affect the Accuracy of Indentation Hardness Tests - 01 January 1989

STP24012S: Gage Repeatability and Reproducibility Studies of Rockwell Scale Hardness Testers - 01 January 1989

STP24013S: Measurement of Rapid-Loading Fracture Toughness JId - 01 January 1989

STP24014S: Automated Fatigue Crack Growth Monitoring: Comparison of Different Crack-Following Techniques - 01 January 1989

STP24015S: Resolution Requirements for Automated Single Specimen JIC Testing - 01 January 1989

STP16760S: Harmonization of Quality Assurance—An Interagency Perspective - 01 January 1989

STP16791S: An Assessment of the Precision and Accuracy of SAM and MFC Microcosms Exposed to Toxicants - 01 January 1989

STP16799S: The New Jersey Toxicity Test Laboratory Certification Program - 01 January 1989

STP22873S: A Quality-Assurance Procedure for Use at Treatment Plants to Predict the Long-Term Suitability of Cement-Based Solidified Hazardous Wastes Deposited in Landfill Sites - 01 January 1989

STP20081S: Results of Field Sampling Programs Conducted at Waste Solvent Treatment and Recycling Facilities - 01 January 1989

STP1057-EB: Accreditation Practices for Inspections, Tests, and Laboratories - 01 January 1989

STP25273S: Laboratory Accreditation in Canada: Update - 01 January 1989

STP25274S: Accreditation of Medical Laboratories in Australia - 01 January 1989

STP25275S: The NAMAS Accreditation System - 01 January 1989

STP25276S: Laboratory Accreditation and Quality System Accreditation—A Merging of the Ways - 01 January 1989

STP25265S: Advantages of Laboratory Accreditation - 01 January 1989

STP25266S: Accrediting Component and Materials Suppliers Laboratories - 01 January 1989

STP25267S: Activities of the Construction Materials Reference Laboratories Related to Laboratory Accreditation - 01 January 1989

STP25268S: National Aerospace and Defense Contractors Accreditation Program - 01 January 1989

STP25264S: Status of Laboratory Accreditation and Related Practices in Standards - 01 January 1989

STP25269S: Operator Errors in the Measurement of Microindentation Hardness - 01 January 1989

STP25270S: Evaluation of Accreditation Systems and Their Demands on the Independent Testing Laboratory - 01 January 1989

STP25271S: Interlaboratory and Intralaboratory Proficiency Testing - 01 January 1989

STP25272S: Towards a New Standard for Laboratory Accreditation Terminology - 01 January 1989

STP26451S: Quality Control of Surfactants for Pesticide Formulations - 01 January 1989

STP26057S: Perkin-Elmer 544 Overlay Evaluation Using Statistical Techniques - 01 January 1989

STP10046S: The Defense Fuel Supply Center's (DFSC) Quality Assurance Program - 01 January 1988

STP10048S: Quality Control for Diesel Fuel in Long-Term Emergency Storage - 01 January 1988

STP10051S: Fuel Quality Program for Long-Term Storage of Gas Turbine Distillate Fuel in Large Tanks - 01 January 1988

STP10039S: Microbiological Contamination: Evaluation of Some Sampling and Laboratory Analytical Methods - 01 January 1988

STP10289S: Evaluation of Lethal Levels, Release Criteria, and Water Quality Objectives for an Acid-Mine Waste - 01 January 1988

STP44845S: Development of Effective Ground-Water Sampling Protocols - 01 January 1988

STP44860S: Design Considerations and the Quality of Data from Multiple-Level Ground-Water Monitoring Wells - 01 January 1988

STP44861S: Verification of Sampling Methods and Selection of Materials for Ground-Water Contamination Studies - 01 January 1988

STP44862S: Chemical Stability Prior to Ground-Water Sampling: A Review of Current Well Purging Methods - 01 January 1988

STP44863S: Investigations of Techniques for Purging Ground-Water Monitoring Wells and Sampling Ground Water for Volatile Organic Compounds - 01 January 1988

STP44865S: Field Evaluation of Seven Sampling Devices for Purgeable Organic Compounds in Ground Water - 01 January 1988

STP44866S: A Hermetically Isolated Sampling Method for Ground-Water Investigations - 01 January 1988

STP44846S: Quality Assurance Guidelines for Ground-Water Investigations: The Requirements - 01 January 1988

STP44867S: Sampling Interaquifer Connector Wells for Polonium-210: Implications for Gross-Alpha Analysis - 01 January 1988

STP44870S: Methods for Virus Sampling and Analysis of Ground Water - 01 January 1988

STP44881S: A Geologic and Flow-System-Based Rationale for Ground-Water Sampling - 01 January 1988

STP33070S: Three-Dimensional Effects Affecting the Precision of Lifetime Predictions - 01 January 1988

STP34034S: An Evaluation of the Screening Level Concentration Approach for Validation of Sediment Quality Criteria for Freshwater and Saltwater Ecosystems - 01 January 1988

STP34036S: Interstitial Water Sampling in Ecotoxicological Testing: Partitioning of a Cationic Surfactant - 01 January 1988

STP26162S: Quality Control System for X-Ray Analysis at Inland Steel Industries - 01 January 1988

STP26693S: Status of the U.S. EPA's Sediment Quality Criteria Development Effort - 01 January 1988

STP26694S: Regional and State Needs in Sampling and Analytical Methodology - 01 January 1988

STP26696S: A Computerized Data Management System for U.S. EPA QA/QC Methods - 01 January 1988

STP26697S: The Variographic Experiment: An Essential Test for Optimizing Sampling Methodology in Monitoring Streams - 01 January 1988

STP29103S: Effects of Sampling Disturbance on Shear Strength of Glacial Till and Compacted Fill - 01 January 1988

STP987-EB: Effect of Steel Manufacturing Processes on the Quality of Bearing Steels - 01 January 1988

STP26241S: Quality of High-Carbon Chromium Bearing Steel Produced in the Electric Arc Furnace—Ladle Furnace—RH Vacuum Degassing Vessel—Vertical Continuous Caster - 01 January 1988

STP26223S: - 01 January 1988

STP26317S: Protective Ensemble Testing Using Passive Sampling Devices - 01 January 1988

STP26436S: Quality Assurance on the Groundwater Monitoring Task Force Facility Assessment Program - 01 January 1988

STP999-EB: Waste Testing and Quality Assurance - 01 January 1988

STP26437S: Round-Robin Study of Leaching Methods as Applied to Solid Wastes from Coal-Fired Power Plants - 01 January 1988

STP26439S: Impacts and Interface of CERCLA Monitoring Requirements with Other State and Federal Programs - 01 January 1988

STP26430S: Collaborative Study of the Toxicity Characteristic Leaching Procedure (TCLP) - 01 January 1988

STP26429S: Development and Validation of RCRA Method 8280 for Dioxins and Furans - 01 January 1988

STP26432S: Methods for Evaluating Solidified Waste - 01 January 1988

STP26433S: Interlaboratory Evaluation of ICP-AES Method 6010 - 01 January 1988

STP26434S: RCRA Laboratory Certification - 01 January 1988

STP26435S: Comparative Study of Preparative and Analytical Techniques for the Determination of Selenium in Water, Sediment, and Vegetation Matrices - 01 January 1988

STP28586S: Estuarine Invertebrates and Fish: Sampling Design and Constraints for Long-Term Measurements of Population Dynamics - 01 January 1987

STP28589S: Monitoring and Quality Assurance Procedures for the Study of Remote Watershed Ecosystems - 01 January 1987

STP28579S: Innovative Designs for Water Quality Monitoring: Are We Asking the Questions Before the Data Are Collected? - 01 January 1987

STP28601S: Quality Assurance in Metals Analysis Using the Inductively Coupled Plasma - 01 January 1987

STP20030S: Results of the IPC Copper Foil Ductility Round-Robin Study - 01 January 1987

STP19439S: Instrumental and Sampling Factors in Infrared Microspectroscopy - 01 January 1987

STP19440S: Considerations for Fiber Sampling with Infrared Microspectroscopy - 01 January 1987

STP19441S: Applications of Microscopic Fourier Transform Infrared Spectrophotometry Sampling Techniques for the Analysis of Polymer Systems - 01 January 1987

STP19442S: Applications of Recent Developments in Fourier Transform Infrared Spectroscopic Microsampling Techniques to Polymeric Materials - 01 January 1987

STP957-EB: Sampling and Calibration for Atmospheric Measurements - 01 January 1987

STP25711S: The U. S. Army's New Industrial Hygiene Sampling Guide - 01 January 1987

STP25713S: Recent Developments in the Sampling and Analysis of Isocyanates in Air - 01 January 1987

STP25699S: Overview of Indoor Air Quality Sampling and Analysis - 01 January 1987

STP25700S: Indoor Air Quality Measurements - 01 January 1987

STP25697S: General Principles of Sampling - 01 January 1987

STP25702S: Sampling of Microbiological Contaminants in Indoor Air - 01 January 1987

STP25703S: Precision and Accuracy Assessment Derived from Calibration Data - 01 January 1987

STP25704S: The EPA's Role in the Quality Assurance of Ambient Air Pollutant Measurements - 01 January 1987

STP25754S: Quality Control and Optimization During Plasma Deposition of a-Si:H - 01 January 1987

STP25785S: Spreading Resistance : A Comparison of Sampling Volume Correction Factors in High Resolution Quantitative Spreading Resistance - 01 January 1987

STP913-EB: Physical Requirement Guidelines For Sensory Evaluation Laboratories - 01 August 1986

STP894-EB: Rationale for Sampling and Interpretation of Ecological Data in the Assessment of Freshwater Ecosystems - 01 January 1986

STP33059S: Sampling and Interpretation of Algal Patterns for Water Quality Assessments - 01 January 1986

STP33062S: Developing a Sampling Strategy - 01 January 1986

STP33053S: Sampling Effort Required to Find Rare Species of Freshwater Mussels - 01 January 1986

STP33054S: Rationale and Sampling Designs for Freshwater Mussels Unionidae in Streams, Large Rivers, Impoundments, and Lakes - 01 January 1986

STP33056S: Interpretation of In Situ Groundwater Quality from Well Samples - 01 January 1986

STP29040S: Quality Assurance Review of the Use of the Hydra Assay in Developmental Toxicity (Teratology) Studies - 01 January 1986

STP18406S: Sampling and In-Situ Geotechnical Investigations Offshore - 01 January 1986

STP18436S: Inorganic Analytical Methods — General Description and Quality Control Considerations - 01 January 1986

STP925-EB: Quality Control in Remedial Site Investigation: Hazardous and Industrial Solid Waste Testing: Fifth Volume - 01 January 1986

STP18437S: Inorganic Analytical Methods Performance and Quality Control Considerations - 01 January 1986

STP18438S: Dioxin Analytical Methods — General Description and Quality Control Considerations - 01 January 1986

STP18439S: Performance of USEPA Method for Analysis of 2,3,7,8-Tetrachloro-Dibenzo-p-Dioxin in Soils and Sediments by Contractor Laboratories - 01 January 1986

STP18440S: Semi-Volatile Organic Analytical Methods — General Description and Quality Control Considerations - 01 January 1986

STP18441S: Semi-Volatile Organic Analytical Methods Performance and Quality Control Considerations - 01 January 1986

STP18442S: Volatile Organic Analytical Methods — General Description and Quality Control Considerations - 01 January 1986

STP18443S: Volatile Organic Analytical Methods Performance and Quality Control Considerations - 01 January 1986

STP18444S: Pesticide Analytical Methods — General Description and Quality Control Considerations - 01 January 1986

STP925-EB: Quality Control in Remedial Site Investigation: Hazardous and Industrial Solid Waste Testing Fifth Volume - 01 January 1986

STP18429S: Ground-Water Monitoring Data Quality Objectives for Remedial Site Investigations - 01 January 1986

STP18430S: A Review of Quality Control Considerations in Soil Sampling - 01 January 1986

STP18428S: Quality Control Considerations in the Selection of Well Design, Drilling Procedures, and Well Construction Materials - 01 January 1986

STP18431S: Design of Soil Sampling Programs: Statistical Considerations - 01 January 1986

STP18432S: Preliminary Monitoring Design for Metal Pollution in Palmerton, Pennsylvania - 01 January 1986

STP18433S: Document Control and Chain-of-Custody Considerations for the National Contract Laboratory Program - 01 January 1986

STP18434S: The Role of the Environmental Protection Agency's Contract Laboratory Program in Analytical Methods Evaluation and Validation - 01 January 1986

STP18435S: Quality Assurance Support for the Superfund Contract Laboratory Program - 01 January 1986

STP23074S: Low-Cost Data Management for Protection of Ground-Water Resources: The Importance of Quality Assurance - 01 January 1986

STP23069S: Comparison of Leachate Quality in Foundry Waste Landfills to Leach Test Abstracts - 01 January 1986

STP23088S: Developing Guides for Sampling and Analysis of Ground Water - 01 January 1986

STP23089S: Soil Moisture Monitoring and Sampling Probe for Underground Storage Tanks and Surface Impoundments - 01 January 1986

STP23090S: Practices for Sampling Solid Wastes from Point Discharges and Impoundments - 01 January 1986

STP23110S: High-Precision Damage-Resistant Multiple-Pass Ultraviolet Reflectometer - 01 January 1986

STP42084S: The Dustron: An Automated Flat Sample Filtration Performance Testing System - 01 January 1986

STP42090S: Filtration as a Method for Air Quality Control in Occupied Spaces - 01 January 1986

STP36287S: Are the “Guidelines for Deriving Numerical National Water Quality Criteria for the Protection of Aquatic Life and Its Uses” Based on Sound Judgments? - 01 January 1985

STP36288S: How Representative are the Data Sets Used to Derive National Water Quality Criteria? - 01 January 1985

STP36289S: Aquatic Hazard Evaluation Principles Applied to the Development of Water Quality Criteria - 01 January 1985

STP36290S: Role of Phytotoxicity Tests in the Derivation of Numerical National Water Quality Criteria - 01 January 1985

STP36292S: Use of Statistical Information to Improve Compatibility Between the Various Components of the Water Quality Based Approach - 01 January 1985

STP30291S: Certification of Local Laboratories Analyzing Drinking Water in Nonprimacy States - 01 January 1985

STP867-EB: Quality Assurance for Environmental Measurements - 01 January 1985

STP30292S: Quality Assurance of U.S. Geological Survey Water-Quality Field Measurements - 01 January 1985

STP30293S: An Analytical Method and Quality Control Program for Studies of Currently Used Pesticides in Surface Waters - 01 January 1985

STP30284S: The U.S. Environmental Protection Agency's Quality Assurance Program - 01 January 1985

STP30294S: Quality Assurance for Microbiological Analyses of Water - 01 January 1985

STP30295S: Steps to Valid Particle Size Data from Emissions Sources - 01 January 1985

STP30296S: Quality Assurance Practices for the Collaborative Testing of Method 6B - 01 January 1985

STP30297S: An Industry View of Quality Assurance for Manual Source Sampling - 01 January 1985

STP30298S: Establishing Destruction Efficiency for Hazardous Waste Incinerators - 01 January 1985

STP30299S: Overview of the National Discharge Monitoring Report (DMR) Quality Assurance (QA) Program - 01 January 1985

STP30300S: Quality Assurance as an Element of Wisconsin's NPDES Program - 01 January 1985

STP30301S: Development of Statistics and Limits for DMR-QA Studies, and Summary of Experience in DMR-QA Study 2 - 01 January 1985

STP30302S: Pulp and Paper Industry Experience with NPDES Quality Assurance Requirements - 01 January 1985

STP30285S: Statistical Aspects of Designs for Studying Sources of Contamination - 01 January 1985

STP30303S: Monsanto Analytical Testing Program for NPDES Discharge Self-Monitoring - 01 January 1985

STP30304S: Discharge Monitoring Report Quality Assurance Results and Follow-Up by Region VIII U.S. Environmental Protection Agency - 01 January 1985

STP30305S: Quality Assurance of Meteorological Measurements - 01 January 1985

STP30306S: Quality Assurance Considerations in Conducting the Ames Test - 01 January 1985

STP30307S: Quality Assurance in Acid Precipitation Measurements - 01 January 1985

STP30308S: Quality Assurance for Personal Exposure Monitoring - 01 January 1985

STP30309S: Quality Assurance for Human Exposure Studies - 01 January 1985

STP30310S: New Biological Reference Materials—In Vivo Incorporated Toxic Metals in Water Hyacinth Tissues - 01 January 1985

STP30311S: The Use of Natural Waters as U.S. Geological Survey Reference Samples - 01 January 1985

STP30312S: The Marine Analytical Chemistry Standards Program of the National Research Council of Canada - 01 January 1985

STP30313S: The Role of NBS Standard Reference Materials in Quality Assurance of Environmental Measurements - 01 January 1985

STP30314S: Reference Materials and Intercomparison Samples Available from the Environmental Monitoring Systems Laboratory — Las Vegas - 01 January 1985

STP30315S: Development and Distribution of Reference Materials for Ambient Air Measurements - 01 January 1985

STP30316S: Reference Samples for Water-Related Programs in the U.S. Environmental Protection Agency - 01 January 1985

STP30317S: Establishing an Environmental Quality Assurance Program - 01 January 1985

STP30318S: Interlaboratory Quality Assurance Aspects of the International Joint Commission's Great Lakes Monitoring Programs - 01 January 1985

STP30286S: Determination of Measurement Data Quality and Establishment of Achievable Goals for Environmental Measurements - 01 January 1985

STP30287S: Quality Assurance Project Plans—A Key to Effective Cooperative Monitoring Programs - 01 January 1985

STP30283S: What is Quality Assurance? - 01 January 1985

STP30288S: Quality Assurance Aspects of Environmental (Aerometric) Data Management - 01 January 1985

STP30290S: Internal Consistency Checks as Part of a Data Validation Process for Chemical Constituents in Ambient Particulate Samples - 01 January 1985

STP36383S: Development of the Volatile Organic Sampling Train for Use in Determining Incinerator Efficiency - 01 January 1985

STP33563S: Water Quality Criteria: Protection of Use Perspective - 01 January 1985

STP32537S: Characterization of High-Purity Cathodes for Plant Control and Marketing Purposes - 01 January 1984

STP831-EB: Sampling and Analysis of Copper Cathodes - 01 January 1984

STP32538S: Prediction of Wire Rod Quality from Cathode Analyses: Input/Output Sampling of a Shaft Furnace Operation - 01 January 1984

STP32539S: Copper Standard Reference Materials (Benchmark Series) - 01 January 1984

STP32540S: Precision of Electrorefined Copper Assaying - 01 January 1984

STP32541S: Simultaneous Multielement Determination of Trace Metal Impurities in Refined Copper by Argon Direct-Current Plasma Atomic Emission Spectroscopy (DCPAES) - 01 January 1984

STP32530S: Standardization of Sampling and Analysis Methods for High-Purity Copper Cathodes: A British View - 01 January 1984

STP32542S: Summary - 01 January 1984

STP32531S: Sampling and Analysis of Copper Cathodes: A User's Viewpoint - 01 January 1984

STP32532S: Reliability Evaluation of Sampling Electrorefined Copper Cathodes - 01 January 1984

STP32533S: An Analysis of Variance of Impurity Distributions in Electrolytically Refined Copper Cathodes - 01 January 1984

STP32534S: Sampling of Copper Cathodes - 01 January 1984

STP32535S: Analysis of Cathode Sampling and Analytical Variance of Electrowon Copper - 01 January 1984

STP32529S: Sampling and Analysis in the Production and Consumption of Copper Cathodes - 01 January 1984

STP32536S: Copper Cathode Sampling in Scandinavia - 01 January 1984

STP32590S: Optimization of Accuracy and Precision in the Differential Scanning Calorimetry Dynamic Purity Method - 01 January 1984

STP29529S: Precision Reactivation of Antifouling Paints - 01 January 1984

STP35229S: The Use of Small-Format Aerial Photography in Aquatic Macrophyton Sampling - 01 January 1984

STP35221S: Biostatistical Aspects of Macrophyton Sampling - 01 January 1984

STP35218S: Aquatic Macrophyton Sampling: An Overview - 01 January 1984

STP845-EB: Statistics in the Environmental Sciences - 01 January 1984

STP30259S: Essential Features of a Laboratory Quality Assurance Program - 01 January 1984

STP33232S: Compression Ring Environmental Stress Crack Resistance (Pipe) Precision and Accuracy Round Robin - 01 January 1984

STP846-EB: Quality Assurance of Polymeric Materials and Products - 01 January 1984

STP33233S: Quality Assurance of Flexible Plastic Pipes for Hot-Water Service - 01 January 1984

STP33226S: Quality Assurance of Polymeric Materials and Products—The Underwriters Laboratories Safety Performance Viewpoint - 01 January 1984

STP33227S: The Role of Interlaboratory Test Programs in Quality Assurance - 01 January 1984

STP33228S: Optimizing Reproducibility in the Analysis of Polymers by Steric Exclusion Chromatography - 01 January 1984

STP33225S: An Industrial Approach to Quality Assurance—Boring? You Bet! But Not If You Want to Make Money - 01 January 1984

STP33229S: Quality Assurance by Means of Thermoanalytical Routine Methods - 01 January 1984

STP33230S: Use of the Automatic Capillary Rheometer in Quality Control - 01 January 1984

STP33231S: Using Rheological Measurements for Quality Assurance - 01 January 1984

STP32640S: The Impact of Standards on Semiconductor Quality and Manufacturing Efficiency - 01 January 1984

STP32690S: Biological Sampling Methods and Effects of Exposure to Municipal and Chemical Landfill Leachate on Aquatic Organisms - 01 January 1984

STP797-EB: Composite Materials: Quality Assurance and Processing - 01 January 1983

STP28535S: Quality Assurance of Graphite/Epoxy by High-Performance Liquid Chromatography - 01 January 1983

STP800-EB: Medical Devices: Measurements, Quality Assurance, and Standards - 01 January 1983

STP35186S: Chapter 15—Quality Assurance Implementation: Diagnostic Instrumentation - 01 January 1983

STP33535S: Fossil Energy Waste Sampling: A General Guideline - 01 January 1983

STP28561S: Inspections, Tests, and Accreditation Activities Associated with Qualification of Safety-Related Equipment for Nuclear Generating Stations - 01 January 1983

STP814-EB: Evaluation and Accreditation of Inspection and Test Activities - 01 January 1983

STP28562S: Reliable Laboratory Data: A Look at a Successful Certification Program - 01 January 1983

STP28563S: The U.S. Army Environmental Hygiene Agency Analytical Quality Assurance Program - 01 January 1983

STP28551S: ASTM Committee E-36 Activities in Standards Development for Laboratory Evaluation and Accreditation - 01 January 1983

STP28564S: The U.S. Army Corps of Engineers Laboratory Evaluation Program - 01 January 1983

STP28565S: Proficiency Testing: An Essential Element of Laboratory Performance Evaluation and Accreditation - 01 January 1983

STP28566S: Performance Evaluation in the U.S. Department of Agriculture’s Food Safety Inspection Service Science Laboratories - 01 January 1983

STP28567S: The Development of National Laboratory Accreditation Schemes with International Acceptance in Mind - 01 January 1983

STP28568S: Interlaboratory Comparisons as Used in the Accreditation of Laboratories in New Zealand’s Dairy Industry - 01 January 1983

STP28569S: The Standards Council of Canada’s Program for Accreditation of Testing Organizations - 01 January 1983

STP28570S: Developments in Australia and New Zealand Laboratory Evaluation Criteria - 01 January 1983

STP28552S: Toward Adoption of a Universal Laboratory Accreditation Criteria - 01 January 1983

STP28553S: Quality Assurance in a Coal Analysis System - 01 January 1983

STP28554S: A Public Utility's Approach to Evaluating Laboratory Test Activities - 01 January 1983

STP28555S: Laboratory Accreditation: More Than Rules - 01 January 1983

STP28556S: Quality Assurance at the Ford Motor Company Central Laboratory: A Dynamic Approach to Laboratory Quality - 01 January 1983

STP28550S: Some Viewpoints on Evaluation/Accreditation Systems - 01 January 1983

STP28557S: Quality Assurance Requirements for Automated Water Quality Laboratories - 01 January 1983

STP28558S: An Industry Approach to Laboratory Quality Assurance and Accreditation Programs - 01 January 1983

STP28559S: Evolution of the National Voluntary Laboratory Accreditation Program Procedures - 01 January 1983

STP28560S: The Laboratory Evaluation Process of the National Voluntary Laboratory Accreditation Program - 01 January 1983

STP37340S: Undisturbed Sampling of Peat - 01 January 1983

STP37336S: A Multistage Sampling Technique for Peat Deposits Utilizing Soil Survey Maps - 01 January 1983

STP823-EB: Sampling and Analysis of Rain - 01 January 1983

STP31878S: Practical Quality Control of Rainwater Analyses - 01 January 1983

STP31883S: Sampling, Analytical, and Quality Assurance Protocols for the National Atmospheric Deposition Program - 01 January 1983

STP31884S: The Updating Process in Precipitation Quality Networks - 01 January 1983

STP32482S: A Quality Control Program Used for Agricultural Formula A Production - 01 January 1983

STP28401S: Formability Testing for Precision and Accuracy - 01 January 1982

STP36716S: International Study on Artemia XXII: Nutrition in Aquatic Toxicology—Diet Quality of Geographical Strains of the Brine Shrimp, Artemia - 01 January 1982

STP36727S: Field Validation of Water Quality Criteria for Hydrophobic Pollutants - 01 January 1982

STP36730S: A Biological Risk Assessment Approach to Establishing Water Quality-Based Effluent Limits - 01 January 1982

STP29359S: Influence of Quality Control Variables on Failure of Graphite/Epoxy Under Extreme Moisture Conditions - 01 January 1982

STP786-EB: Toxic Materials in the Atmosphere: Sampling and Analysis - 01 January 1982

STP33992S: Large Volume Sampling Without Preconcentration for Continuous Gas Chromatography - 01 January 1982

STP33994S: Sampling and Chemical Characterization of Concentrated Smokes - 01 January 1982

STP33985S: Sampling and Analysis of Airborne Fenitrothion and Tris(2-Ethylhexyl)Phosphate - 01 January 1982

STP33982S: The U.S. Army's Industrial Hygiene Sampling Guide - 01 January 1982

STP28506S: Reinforced and Nonreinforced Reaction Injection Molding Machines for Production of Polyurethane Specimens for Material Development, Evaluation, and Quality Control - 01 January 1982

STP27636S: Statistical Techniques for Evaluating Procedures and Results for Periphyton Sampling - 01 January 1981

STP27642S: Annual Macroinvertebrate Sampling—A Low-Cost Tool for Ecological Assessment of Effluent Impact - 01 January 1981

STP27645S: Role of Electrofishing in Assessing Environmental Quality of the Wabash River - 01 January 1981

STP27655S: Various Methods Used in Evaluating the Quality of Oil-Field Waters for Subsurface Injection - 01 January 1981

STP33454S: Procedures for Precision Measurement of Fatigue Crack Growth Rate Using Crack-Opening Displacement Techniques - 01 January 1981

STP28271S: Critical Overview of Power Station Sampling and Analysis of Water and Steam - 01 January 1981

STP28276S: Program for Steam Purity Monitoring: 1. Instrumentation and Sampling - 01 January 1981

STP744-EB: Statistical Analysis of Fatigue Data - 01 January 1981

STP28837S: A Comparison of Groundwater Quality at Selected Landfills to Leaching Test Results - 01 January 1981

STP36119S: Precision of Rate-Process Method for Predicting Durability of Adhesive Bonds - 01 January 1980

STP35114S: The DOE-OES-EML Quality Assurance Program - 01 January 1980

STP32415S: State of the Art: State Acceptance of Bituminous Concrete Production and Construction Using Quality Assurance Specifications - 01 January 1980

STP709-EB: Quality Assurance in Pavement Construction - 01 January 1980

STP32416S: Controlling Aggregate Properties for Compliance with Statistical Specifications - 01 January 1980

STP32417S: End-Result Specifications—A Contractor's Viewpoint - 01 January 1980

STP32414S: Quality Assurance and Quality of Construction - 01 January 1980

STP33416S: Reference Toxicants in Quality Control of Aquatic Bioassays - 01 January 1980

STP29281S: Sampling Faced Foam Insulation Board for Heat Flow Meter Thermal Performance Testing - 01 January 1980

STP721-EB: Sampling and Analysis of Toxic Organics in the Atmosphere - 01 January 1980

STP27571S: Sampling Rates and Other Considerations for Selected Passive Air Sampling Techniques - 01 January 1980

STP27558S: Organics in Air: Sampling and Identification - 01 January 1980

STP27560S: OSHA's Wipe Sampling Policies and Procedures - 01 January 1980

STP27563S: Nitrosamine Air Sampling Using a New Artifact-Resistant Solid Sorbent System - 01 January 1980

STP34956S: Procedures for Sampling Urban Rat Populations for Anticoagulant Resistance Evaluation - 01 June 1979

STP35925S: Chapter 4—Sampling - 01 March 1979

STP34895S: Interpretation of Chemical Water Quality Data - 01 January 1979

STP36926S: Physiochemical Characterization of Composites and Quality Control of Raw Materials - 01 January 1979

STP36928S: Applications of Fourier Transform Infrared Spectroscopy to Quality Control of the Epoxy Matrix - 01 January 1979

STP35065S: Sampling and Interpretation of Epilithic Lotic Diatom Communities - 01 January 1979

STP35969S: Errors Due to Temporal Sampling - 01 January 1979

STP36957S: Bias Passenger Tires: Effect of Construction on the Cord Deformation and Temperature Rise During Rolling - 01 January 1979

STP35603S: Chapter 3—Statistical Considerations in Sampling and Testing - 01 January 1978

STP35602S: Chapter 2—Techniques, Procedures, and Practices of Sampling of Concrete and Concrete-Making Materials - 01 January 1978

STP47427S: Chapter 9—Sampling and Flow Measurement of Water - 01 January 1978

STP47428S: Chapter 10—Water-Quality Monitoring - 01 January 1978

STP47431S: Chapter 13—Sampling and Identification of Deposits in Steam and Water Systems - 01 January 1978

STP47425S: Chapter 7—Self-Purification and Other Natural-Quality Recovery Mechanisms - 01 January 1978

STP35664S: Sampling Design for Some Trace Elemental Distributions in New York Bight Sediments - 01 January 1978

STP653-EB: Air Quality Meteorology and Atmospheric Ozone - 01 January 1978

STP36593S: Applications of General Meteorological Models to Air Quality Problems - 01 January 1978

STP36594S: On the Development of a Guideline for Applying Air Quality Models - 01 January 1978

STP36601S: Description and Review of Global Measurements of Atmospheric Species from the Global Atmospheric Sampling Program (GASP) - 01 January 1978

STP36602S: Global Atmospheric Sampling Program: Prospects for Establishing a Tropospheric Ozone Budget from Commercial Aircraft Data - 01 January 1978

STP36606S: Detection and Interpretation of Trends in Oxidant Air Quality - 01 January 1978

STP35767S: Field Description and Characterization of Coals Sampled by the Oklahoma Geological Survey, 1971–1976 - 01 January 1978

STP27918S: Chapter 7—Cause and Effects Analysis - 01 January 1977

STP616-EB: Quality Systems in the Nuclear Industry - 01 January 1977

STP27919S: Chapter 8—Consequence Analysis - 01 January 1977

STP27920S: Chapter 9—Component/Part Application Analysis - 01 January 1977

STP27921S: Chapter 10—Maintenance and Spares Analyses - 01 January 1977

STP27922S: Chapter II—Design Review - 01 January 1977

STP27923S: Chapter 12—Quality Requirements for Supplies - 01 January 1977

STP27912S: Chapter 1—Meanings, Goals, and Scope of Quality - 01 January 1977

STP27924S: Chapter 13—Source Selection - 01 January 1977

STP27925S: Chapter 14—Measurement Control - 01 January 1977

STP27913S: Chapter 2—The Systems Approach - 01 January 1977

STP27926S: Chapter 15—Component Qualification - 01 January 1977

STP27927S: Chapter 16—Design Change Control - 01 January 1977

STP27928S: Chapter 17—Acceptance Sampling - 01 January 1977

STP27929S: Chapter 18—Inspection/Test Planning and Process Control - 01 January 1977

STP27914S: Chapter 3—The Product Evolution Cycle - 01 January 1977

STP27930S: Chapter 19—Control of Noncomforming Items - 01 January 1977

STP27915S: Chapter 4—Requirements Type Documents - 01 January 1977

STP27932S: Chapter 21—Quality Information Feedback and Corrective Action - 01 January 1977

STP27933S: Chapter 22—Auditing Quality Systems and Inspection Effectiveness - 01 January 1977

STP27934S: Chapter 23—Industrial Psychology in Quality Control - 01 January 1977

STP27935S: Chapter 24—Economics of Quality - 01 January 1977

STP27916S: Chapter 5—Design Requirements - 01 January 1977

STP27917S: Chapter 6—Tolerancing - 01 January 1977

STP27088S: Statistical Aspects of Mechanical Property Assurance - 01 January 1977

STP27085S: Use of the Short-Beam Shear Test for Quality Control of Graphite-Polyimide Laminates - 01 January 1977

STP27398S: A High-Speed Digital Technique for Precision Measurement of Crack Velocities - 01 January 1977

STP32400S: Evaluation of the Significance of Waterway Sediment-Associated Contaminants on Water Quality at the Dredged Material Disposal Site - 01 January 1977

STP32405S: Diet Quality in Fish Toxicology: Effects on Acute and Chronic Toxicity - 01 January 1977

STP34823S: Bifidobacteria as Water Quality Indicators - 01 January 1977

STP34826S: Bacterial Indicators and Standards for Water Quality in the Federal Republic of Germany - 01 January 1977

STP34827S: South African Experience on Indicator Bacteria, Pseudomonas aeruginosa, and R+ Coliforms in Water Quality Control - 01 January 1977

STP34828S: Bacterial Water Quality and Standards: The Role of the World Health Organization - 01 January 1977

STP34830S: Bacterial Indicators of Drinking Water Quality - 01 January 1977

STP34831S: Indicators of Recreational Water Quality - 01 January 1977

STP34832S: Bacterial Indicators of Water Quality in Swimming Pools and Their Role - 01 January 1977

STP34836S: Bacterial Indicators and Standards of Water Quality in Britain - 01 January 1977

STP34837S: Indicators of Quality for Shellfish Waters - 01 January 1977

STP34819S: Clostridium perfringens as a Water Quality Indicator - 01 January 1977

STP30038S: Experiences with Subjective/Objective Correlation - 01 January 1976

STP30033S: General Guidelines for Selecting Objective Tests and Multiple Regression Applications - 01 January 1976

STP30036S: Overview of Applied Multivariate Analysis - 01 January 1976

STP30037S: Applications of Multidimensional Scaling to the Psychological Evaluation of Odors - 01 January 1976

STP32374S: Development of Synthetic Standard Samples for Trace Analysis of Air Particulates - 01 January 1976

STP28644S: Notch-Yield Ratio as a Quality Control Index for Plane-Strain Fracture Toughness - 01 January 1976

STP607-EB: Biological Monitoring of Water and Effluent Quality - 01 January 1976

STP27839S: Rapid Assessment of Water Quality Using the Fingernail Clam, Musculium transversum - 01 January 1976

STP27868S: Quality Control for the Manufacture of Child-Resistant Closures - 01 January 1976

STP27869S: Quality Control of Special Packaging (Child-Resistant) Caps - 01 January 1976

STP37213S: Sampling and Analysis of Fire Atmospheres - 01 January 1976

STP33181S: Reliability After Inspection - 01 January 1975

STP32247S: Acceptance Testing Welded Ammunition Belt Links Using Acoustic Emission - 01 January 1975

STP573-EB: Water Quality Parameters - 01 January 1975

STP39024S: Automatic Water Quality Monitoring Within the Saint John River Basin - 01 January 1975

STP39034S: Sampling Techniques in Urban Runoff Quality Studies - 01 January 1975

STP39035S: Stable Carbon Isotope Ratios as Water Quality Indicators - 01 January 1975

STP39036S: Data Are for Looking At or Quality Control Through Interpretation - 01 January 1975

STP32304S: Measurement of Thermal and Mechanical Properties of Graphiteepoxy Composites for Precision Applications - 01 January 1975

STP582-EB: Water Pollution Assessment: Automatic Sampling and Measurement - 01 January 1975

STP33353S: An Automated Remote Marshland Water Sampling Station - 01 January 1975

STP588-EB: Manual on Statistical Planning and Analysis - 01 January 1975

STP33878S: Chapter 2—Necessary Steps in Statistical Analysis for Planned Experiments - 01 January 1975

STP33877S: Chapter 1—Fundamental Concepts in the Statistical Planning (Design) of Fatigue Experiments - 01 January 1975

STP33879S: Chapter 3—Planning S-N and Response Tests - 01 January 1975

STP33880S: Chapter 4—Distribution-Free Statistical Tests for Comparing Two Censored Life Samples (in a CRD Test Program) - 01 January 1975

STP32207S: Accuracy of Fatigue Testing - 01 October 1974

STP38973S: Monitoring Trace Metal Particulates: An Evaluation of the Sampling and Analysis Problems - 01 January 1974

STP38974S: Filter Media for Atmospheric Sampling and Analysis - 01 January 1974

STP528-EB: Biological Methods for the Assessment of Water Quality - 01 January 1973

STP34713S: Interaction of Engineers and Biologists in Water Quality Management - 01 January 1973

STP34717S: Bacteria and the Assessment of Water Quality - 01 January 1973

STP34718S: Use of Algae, Especially Diatoms, in the Assessment of Water Quality - 01 January 1973

STP34719S: Use of Aquatic Invertebrates in the Assessment of Water Quality - 01 January 1973

STP531-EB: Manual on Requirements, Handling, and Quality Control of Gas Turbine Fuel - 01 January 1973

STP47386S: Production and Quality Control of Elastomer Mounts - 01 January 1973

STP36537S: Microsampling Techniques for Infrared Spectroscopic Analysis of Lunar and Terrestrial Minerals - 01 January 1973

STP34751S: Sampling and Analysis for an Oxygen Steel Shop - 01 January 1973

STP540-EB: Sampling, Standards and Homogeneity - 01 January 1973

STP34752S: Paper Fiber Filters for Sampling Trace Metals in Airborne Particulate Matter - 01 January 1973

STP34744S: Role of Homogeneity in Powder Sampling - 01 January 1973

STP34748S: Problems in Manufacture of National Bureau of Standards Cast Metal Standard Reference Materials - 01 January 1973

STP34749S: Problems in Sampling Ferroalloys with Emphasis on Ferrosilicon - 01 January 1973

STP34750S: Sampling and On-Stream X-Ray Control of Portland Cement Raw Mix Slurry - 01 January 1973

STP34765S: Sensory Evaluation: Potentials for Precision and More General Application in Science and Technology - 01 January 1973

STP37183S: Sampling, Separations, and Identification of Binder and Solvent - 01 January 1972

STP501-EB: Underwater Soil Sampling, Testing, and Construction Control - 01 January 1972

STP38791S: Underwater Soil Sampling and Testing—A State-of-the-Art Review - 01 January 1972

STP38792S: Recent Trends in Underwater Soil Sampling Methods - 01 January 1972

STP34687S: Apollo Quality Through Predictive Testing - 01 January 1972

STP483-EB: Sampling of Soil and Rock - 01 January 1971

STP26662S: Loss of Strength Due to Sampling in a Glacial Lake Deposit - 01 January 1971

STP26656S: Effect of Sampling and Testing Techniques on the Shear Strength of a Glacial-Lacustrine Clay from Welland, Ontario - 01 January 1971

STP26663S: Effect of Sampling, Size, and Storage on Test Results for Marine Clay - 01 January 1971

STP26665S: Sampling Disturbance in Champlain Clays - 01 January 1971

STP26666S: Effect of Sampling on Some Soil Characteristics - 01 January 1971

STP26655S: The Practice of Sampling Soil and Rock - 01 January 1971

STP26660S: Representative Sampling in Location, Quality, and Size - 01 January 1971

STP28618S: Precision of Air-Permeability, Turbidimeter, and No. 325 Sieve Fineness Data - 01 January 1970

STP29146S: Predicting In Situ Modulus of Deformation Using Rock Quality Indexes - 01 January 1970

STP38474S: Suggested Method for Soil Investigation and Sampling by Hollow-Stem Auger Borings - 01 January 1970

STP44686S: Chapter VIII Sampling and Flow Measurement of Industrial Water - 01 May 1969

STP44689S: Chapter XI Instrumental Monitoring of Water Quality - 01 May 1969

STP44690S: Chapter XII Sampling and Instrumental Identification of Water-Formed Deposits - 01 May 1969

STP44684S: Chapter VI Self-Purification and Other Natural Quality Recovery Mechanisms - 01 May 1969

STP428-EB: Automated Analyzers and Quality Control for the Petroleum Industry - 01 January 1968

STP45868S: Advanced Process Chromatograph and Modern Petroleum Plant Analysis and Control Requirements - 01 January 1968

STP45869S: Automatic Blending and Inspection of Lubricating Oils at the Refinery - 01 January 1968

STP45870S: In-Line Gasoline Blending Trends, Economics, and the Use of Continuous Analyzers for Quality Control - 01 January 1968

STP45867S: Instrumentation for Quality Assurance of Petroleum Products - 01 January 1968

STP45871S: Quality Assurance in Petroleum Pipeline Transfer Operations - 01 January 1968

STP45872S: Quality Assurance in Jet Fuel Transfer Operations - 01 January 1968

STP416-EB: Water Quality Criteria - 01 January 1967

STP47253S: What Do We Really Know About Stream Quality Criteria and Standards? - 01 January 1967

STP47254S: Measurement of Water Quality with the Pacific Oyster Embryo Bioassay - 01 January 1967

STP47249S: Quantitative Assessment of Irrigation Water Quality - 01 January 1967

STP47252S: Water Quality Requirements of Estuarine Organisms - 01 January 1967

STP47139S: Current and Future Applications of Hydrocarbon Analysis in Quality Control - 01 January 1965

STP46184S: Mechanical Methods of Undisturbed Soil Sampling - 01 January 1964

STP45115S: Quality Control and Inspection of Laminated Timber Construction - 01 January 1964

STP45117S: Quality Control for Lumber Products - 01 January 1964

STP362-EB: Statistical Methods for Quality Control of Road and Paving Materials - 01 January 1964

STP44577S: Significance of Test Results Obtained from Random Samples - 01 January 1964

STP44578S: Tolerances and Variations of Highway Materials from Specification Limits - 01 January 1964

STP44576S: Establishing Specification Limits by Statistical Data Analysis - 01 January 1964

STP44579S: Uniformity of Asphalt Concrete Plant Production - 01 January 1964

STP48333S: Variable Bias Illumination Control for the Electron Microscope - 01 January 1964

STP44515S: Quality Control of High-Temperature Solid Rocket Control Components - 01 July 1963

STP44440S: ASTM Task Group Round-Robin Testing - 01 January 1963

STP44445S: Quality Control Procedures for Rocket Motor Cases: Reinforced Plastic Versus Steel - 01 January 1963

STP335-EB: ASTM Manual for Conductiong an Interlaboratory Study of a Test Method - 01 January 1963

STP44454S: VI. Experimental Plans for Interlaboratory Studies - 01 January 1963

STP44449S: I. Purpose - 01 January 1963

STP44450S: II. Origin of an Interlaboratory Study - 01 January 1963

STP44451S: III. General Requirements for Conducting Interlaboratory Studies (18) - 01 January 1963

STP44452S: IV. The Measuring Process - 01 January 1963

STP44453S: V. Interlaboratory Tests - 01 January 1963

STP41267S: Problems of Precision and Accuracy in Measurement of Electron Diffraction Patterns - 01 January 1963

STP47345S: Guide for Fatigue Testing and Statistical Analysis - 01 January 1963

STP91A-EB: A Guide for Fatigue Testing and the Statistical Analysis of Fatigue Data - 01 January 1963

STP313-EB: ASTM Manual on Fitting Straight Lines - 01 January 1962

STP46393S: ASTM Manual on Fitting Straight Lines - 01 January 1962

STP47047S: Lunar Soil Sampling and Testing - 01 January 1962

STP41243S: Quality Control of Getters - 01 January 1961

STP44222S: Chapter VIII—Sampling and Identification of Water-Formed Deposits - 01 January 1960

STP44226S: Proposed Procedure for Determination of Precision of Committee D-19 Methods - 01 January 1960

STP44228S: D 510 - 55 T Tentative Methods of Sampling Industrial Water - 01 January 1960

STP44240S: D 860 - 54 Standard Method of Sampling Water from Boilers - 01 January 1960

STP44241S: D 887 - 49 Standard Method of Field Sampling of Water-Formed Deposits - 01 January 1960

STP44249S: D 1066 - 59 T Tentative Method of Sampling Steam - 01 January 1960

STP44261S: D 1192 - 51 T Tentative Specifications for Equipment for Sampling Industrial Water and Steam - 01 January 1960

STP44282S: D 1496 - 57 T Tentative Methods of Sampling Homogeneous Industrial Waste Water - 01 January 1960

STP44220S: Chapter VI—Sampling and Flow Measurement of Industrial Water and Industrial Waste Water - 01 January 1960

STP48510S: Chapter VIII. Sampling and Identification of Water-Formed Deposits - 01 January 1960

STP48514S: Proposed Procedure for Determination of Precision of Committee D-19 Methods - 01 January 1960

STP48516S: D 510 - 55 T Tentative Methods of Sampling Industrial Water - 01 January 1960

STP48528S: D 860 - 54 Standard Method of Sampling Water from Boilers - 01 January 1960

STP48529S: D 887 - 49 Standard Method of Field Sampling of Water-Formed Deposits - 01 January 1960

STP48537S: D 1066 - 59 T Tentative Method of Sampling Steam - 01 January 1960

STP48549S: D 1192 - 51 T Tentative Specifications for Equipment for Sampling Industrial Water and Steam - 01 January 1960

STP48570S: D 1496 - 57 T Tentative Methods of Sampling Homogeneous Industrial Waste Water - 01 January 1960

STP48508S: Chapter VI. Sampling and Flow Measurement of Industrial Water and Industrial Waste Water - 01 January 1960

STP38334S: Quality Control and Inspection - 01 January 1960

STP242-EB: 1958 Symposium on Bulk Sampling - 01 January 1959

STP39487S: A Physical Interpretation of Coal Sampling Variances with Application to Sample Reduction - 01 January 1959

STP39488S: The Effect of Increment Weight on Sampling Accuracy - 01 January 1959

STP39486S: Some Measurement Error Considerations in Bulk Sampling with Special Reference to the Sampling of Fertilizer - 01 January 1959

STP39489S: Studies in Ore Car and Abrasive Grain Sampling Variation - 01 January 1959

STP47184S: Precision of Present ASTM Tests on Bitumens and Bituminous Materials - 01 January 1959

STP41997S: A High Precision Density Times Thickness Gage - 01 January 1958

STP46905S: Sampling of Lubricating Oil from Diesel Locomotives - 01 January 1957

STP41186S: Chapter VII—Sampling and Identification of Water-Formed Deposits - 01 December 1956

STP41188S: Appendix: Methods of Sampling - 01 December 1956

STP41184S: Chapter V—Sampling of Industrial Water - 01 December 1956

STP43640S: Chapter 1 Sampling Petroleum Products - 01 January 1956

STP162-EB: Symposium on Coal Sampling - 01 January 1955

STP46267S: The Variances of Reduction and Analysis - 01 January 1955

STP46268S: Multilot Sampling—The Accuracies in Sampling of Large Coal Shipments by Application of the Variance Concept - 01 January 1955

STP46269S: Tests on the Binomial Sampling Theory for Heterogeneous Coals - 01 January 1955

STP46261S: Introduction - 01 January 1955

STP46263S: Some Recent British Work on Coal Sampling - 01 January 1955

STP46264S: A Test on a Slotted Revolving Cylinder Coal Sampler - 01 January 1955

STP46262S: The Development of the Theoretical Basis of Coal Sampling - 01 January 1955

STP46265S: Tests of Accuracy of a Mechanical Coal Sampler - 01 January 1955

STP46266S: Tests of the Geary-Jennings Sampler at Cabin Creek - 01 January 1955

STP41688S: The Effect of Grain Size Upon the Fatigue Properties at 80, 1200 and 1600 F of “Precision Cast” Alloy X-40 - 01 January 1953

STP47689S: Automatic Sampling of Industrial Water and Industrial Waste Water - 01 January 1953

STP137-EB: Symposium on Fatigue with Emphasis on Statistical Approach-II - 01 January 1953

STP45670S: The Statistical Behavior of Fatigue Properties and the Influence of Metallurgical Factors - 01 January 1953

STP45669S: The Statistical Nature of the Fatigue Properties of SAE 4340 Steel Forgings - 01 January 1953

STP45671S: A Statistical Interpretation of the Effect of Understressing on Fatigue Strength - 01 January 1953

STP45672S: Fatigue Properties of Large Specimens with Related Size and Statistical Effects - 01 January 1953

STP139-EB: Symposium on Statistical Methods for the Detergent Laboratories - 01 January 1953

STP46775S: The Design of Laboratory Control of Laundry Washrooms Based on an Analysis of Variance - 01 January 1953

STP46773S: Introduction - 01 January 1953

STP46776S: The Importance of Correlations in Detergency Testing - 01 January 1953

STP46774S: Graphical Methods of Statistical Analysis and Tests for Significance - 01 January 1953

STP44037S: Quality Control of Metal Powder Gears - 01 January 1953

STP41579S: Chapter VIISampling and Identification of Water-Formed Deposits - 01 January 1953

STP41577S: Chapter VSampling of Industrial Water - 01 January 1953

STP114-EB: Symposium on Bulk Sampling - 01 January 1952

STP43980S: Two-Stage Acceptance Sampling by Attributes - 01 January 1952

STP43981S: Coal Sampling Problems - 01 January 1952

STP43982S: The Analysis of Variance in a Sampling Experiment - 01 January 1952

STP43983S: The Design of Coal Sampling Procedures - 01 January 1952

STP43978S: Materials Handling for Bulk Sampling - 01 January 1952

STP43979S: Economic Accumulation of Variance Data in Connection with Bulk Sampling - 01 January 1952

STP47683S: Interviewer Bias - 01 January 1952

STP47685S: Effective Sampling Procedures for Use in Measuring Consumer Wants - 01 January 1952

STP121-EB: Symposium on Statistical Aspects of Fatigue - 01 January 1952

STP43997S: On the Statistical Nature of Fatigue - 01 January 1952

STP43996S: Planning and Interpretation of Fatigue Tests - 01 January 1952

STP43998S: Statistical Analysis of Fatigue Data - 01 January 1952

STP15C-EB: ASTM Manual on Quality Control of Materials - 01 January 1951

STP39500S: Part 1: Presentation of Data - 01 January 1951

STP39501S: Part 2: Presenting ± Limits of Uncertainty of an Observed Average - 01 January 1951

STP39502S: Part 3: Control Chart Method of Analysis and Presentation of Data - 01 January 1951

STP103-EB: Symposium on Application of Statistics - 01 January 1950

STP44978S: Precision and Accuracy of Test Methods - 01 January 1950

STP44979S: Use of Statistics to Determine Precision of Test Methods - 01 January 1950

STP44980S: Modern Quality Control - 01 January 1950

STP44977S: The Economic Relationship Between Design and Acceptance Specifications - 01 January 1950

STP47339S: Mobilizing the Van De Graaff Generator for Precision Radiography - 01 January 1950

STP46212S: Sampling of Mineral Aggregates - 01 January 1948

STP47660S: Introduction - 01 November 1946

STP66-EB: Discussion on Statistical Quality Control in its Application to Specification Requirements - 01 November 1946

STP47661S: Use of Statistics in Writing Specifications - 01 November 1946

STP47662S: Dollars for Your Thoughts - 01 November 1946

STP43919S: Precision Radiography—III - 01 January 1943