D4294-16e1: Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
D4057-12: Standard Practice for Manual Sampling of Petroleum and Petroleum Products
D1250-08(2013)e1: Standard Guide for Use of the Petroleum Measurement Tables
D974-14e2: Standard Test Method for Acid and Base Number by Color-Indicator Titration
D2270-10(2016): Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
D7843-16: Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
D1298-12b(2017): Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D1319-15: Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
D1500-12(2017): Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
D1945-14: Standard Test Method for Analysis of Natural Gas by Gas Chromatography
D3699-13be1: Standard Specification for Kerosine
D5845-01(2016): Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and
D7039-15a: Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
D95-13e1: Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
D4806-17: Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
D4815-15b: Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C
D5504-12: Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
D5705-15: Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
D5769-15: Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
D6927-15: Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
D7501-12a(2017): Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
D979/D979M-15: Standard Practice for Sampling Bituminous Paving Mixtures
E1739-95(2015): Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites
D1142-95(2012): Standard Test Method for Water Vapor Content of Gaseous Fuels by
D1265-11(2017)e1: Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
D156-15: Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
D2158-16ae1: Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
D2276-06(2014): Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
D235-02(2012): Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
D240-17: Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
D2622-16: Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D2709-16: Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
D2896-15: Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
D341-17: Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products
D381-12(2017): Standard Test Method for Gum Content in Fuels by Jet Evaporation
D4174-17: Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
D4176-04(2014): Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
D4378-13: Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
D449/D449M-03(2014)e1: Standard Specification for Asphalt Used in Dampproofing and Waterproofing
D4539-17: Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
D482-13: Standard Test Method for Ash from Petroleum Products
D5059-14: Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
D5185-18: Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5191-15: Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
D5291-16: Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
D6079-11(2016): Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
D6377-16: Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR
D6378-10(2016): Standard Test Method for Determination of Vapor Pressure (VP
D6423-14: Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
D6469-17: Standard Guide for Microbial Contamination in Fuels and Fuel Systems
D6937-16: Standard Test Method for Determining Density of Emulsified Asphalt
D7153-15e1: Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
D8045-17: Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
D808-16: Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
D976-06(2016): Standard Test Method for Calculated Cetane Index of Distillate Fuels
E2275-14: Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance
D1227-13: Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
D1264-16: Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
D127-08(2015): Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
D1386-15: Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
D1401-18a: Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
D1524-15: Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field
D1561/D1561M-13: Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
D1742-06(2013): Standard Test Method for Oil Separation from Lubricating Grease During Storage
D1946-90(2015)e1: Standard Practice for Analysis of Reformed Gas by Gas Chromatography
D2161-17: Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
D2510-94(2017): Standard Test Method for Adhesion of Solid Film Lubricants
D2598-16: Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
D2879-10: Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
D323-15a: Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
D3236-15: Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
D3427-15: Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
D3712-05(2017): Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
D4048-16e1: Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
D4172-94(2016): Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
D473-07(2017)e1: Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
D4810-06(2015): Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
D4865-09(2014): Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
D4898-16: Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
D5292-99(2014): Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
D5580-15: Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene,
D6045-12(2017): Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
D6470-99(2015): Standard Test Method for Salt in Crude Oils (Potentiometric Method)
D6560-17: Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
D6934-08(2016): Standard Test Method for Residue by Evaporation of Emulsified Asphalt
D7097-16a: Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
D7112-12(2017): Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
D7157-12: Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (
D7417-17: Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
D7647-10: Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
D7684-11(2016): Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
D7751-16: Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
D7752-18: Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
D7777-13: Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
D7833-14: Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
D7845-17: Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
D7876-13: Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
D7946-14: Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
D94-07(2017): Standard Test Methods for Saponification Number of Petroleum Products
E2681-13: Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum
E2733-10(2015): Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems
D1025-10(2015)e1: Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene
D1072-06(2017): Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
D113-17: Standard Test Method for Ductility of Asphalt Materials
D1159-07(2017): Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
D130-12: Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D1404/D1404M-99(2014): Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
D1748-10(2015): Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
D1826-94(2017): Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
D1831-11: Standard Test Method for Roll Stability of Lubricating Grease
D2008-12: Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
D2027/D2027M-13: Standard Specification for Cutback Asphalt (Medium-Curing Type)
D2155-12: Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
D2163-14e1: Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
D2265-15e1: Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
D2266-01(2015): Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
D2272-14a: Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
D2320-98(2017): Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
D2386-15e1: Standard Test Method for Freezing Point of Aviation Fuels
D2397/D2397M-17: Standard Specification for Cationic Emulsified Asphalt
D2422-97(2013): Standard Classification of Industrial Fluid Lubricants by Viscosity System
D2425-17: Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
D2493/D2493M-16: Standard Practice for Viscosity-Temperature Chart for Asphalt Binders
D2504-88(2015): Standard Test Method for Noncondensable Gases in C
D2505-88(2015): Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
D2549-02(2017): Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
D2593-93(2014): Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
D2624-15: Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
D2625-94(2015): Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
D2710-09(2013): Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
D2713-15: Standard Test Method for Dryness of Propane (Valve Freeze Method)
D2714-94(2014): Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
D287-12b: Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
D2872-12e1: Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
D2982-07(2013): Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
D3240-15: Standard Test Method for Undissolved Water In Aviation Turbine Fuels
D3279-12e1: Standard Test Method for
D3462/D3462M-16: Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
D3525-04(2016): Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
D3606-17: Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
D3703-13: Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
D3704-96(2017): Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
D3764-15e1: Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
D4170-16: Standard Test Method for Fretting Wear Protection by Lubricating Greases
D4215-07(2013): Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
D4419-90(2015): Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
D4468-85(2015): Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and
D4627-12(2017): Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids
D4636-17: Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
D4739-17: Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
D4742-17: Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
D4799/D4799M-17: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
D4807-05(2015): Standard Test Method for Sediment in Crude Oil by Membrane Filtration
D4888-06(2015): Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
D4927-15: Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
D4928-12: Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
D4952-12(2017): Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
D5/D5M-13: Standard Test Method for Penetration of Bituminous Materials
D5133-15: Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
D5182-97(2014): Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
D5186-15: Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography
D5234-92(2017): Standard Guide for Analysis of Ethylene Product
D5452-12: Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
D5599-17: Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
D5797-17: Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
D5798-17: Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
D5800-15a: Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
D5863-00a(2016): Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
D5954-98(2014)e1: Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
D6/D6M-95(2011)e1: Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
D6021-12(2017): Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
D6081-98(2014): Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
D6122-15: Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
D6184-17: Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
D6186-08(2013): Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
D6224-16: Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
D6228-10: Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
D6273-14: Standard Test Methods for Natural Gas Odor Intensity
D6335-16: Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
D6425-17: Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
D6443-14: Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
D6468-08(2013): Standard Test Method for High Temperature Stability of Middle Distillate Fuels
D6550-15: Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
D6584-17: Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
D6615-15a: Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
D6624-14: Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
D6667-14: Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
D6704-08(2015): Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
D6710-17: Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
D6733-01(2016): Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
D6810-13: Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
D6929-16: Standard Practice to Evaluate the Effect of Freezing on Emulsified Asphalts
D6968-03(2015): Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
D70-18: Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
D7043-17: Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
D7059-09(2017): Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
D7096-16: Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
D71-94(2015)e1: Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
D7152-11(2016): Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
D7164-10(2015): Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
D7261-17: Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
D7319-17: Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
D7344-17a: Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
D7372-17: Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
D7404-07(2016): Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
D7414-18: Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
D7451-16: Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
D7464-14: Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
D7525-14: Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
D7544-12(2017): Standard Specification for Pyrolysis Liquid Biofuel
D7579-09(2013): Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
D7596-14: Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
D7603-13: Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
D7618-13(2017): Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
D7757-17: Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
D7807-12: Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
D7892-15: Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
D7898-14: Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery
D7900-17: Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
D7919-14(2017): Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
D7920-15e1: Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
D7963-14: Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
D8003-15a: Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
D8009-15: Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
D8011-17: Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
D8073-16: Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument
D87-09(2014): Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
D874-13a: Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
D937-07(2012): Standard Test Method for Cone Penetration of Petrolatum
D972-16: Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
E1259-16: Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C
E1497-17: Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids
E2694-16: Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
E3044/E3044M-16e1: Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints
F1397-93(2012): Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components
Copyright © 1996 - 2014 ASTM. All Rights Reserved. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA
