A53/A53M-12: Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A370-17: Standard Test Methods and Definitions for Mechanical Testing of Steel Products
E8/E8M-16a: Standard Test Methods for Tension Testing of Metallic Materials
E18-16: Standard Test Methods for Rockwell Hardness of Metallic Materials
B117-16: Standard Practice for Operating Salt Spray (Fog) Apparatus
A240/A240M-16a: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
E1444/E1444M-16e1: Standard Practice for Magnetic Particle Testing
A967/A967M-13: Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A380/A380M-13: Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A6/A6M-16a: Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
E10-15a: Standard Test Method for Brinell Hardness of Metallic Materials
E384-16: Standard Test Method for Microindentation Hardness of Materials
A1008/A1008M-16: Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
E23-16b: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
A123/A123M-15: Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A480/A480M-16b: Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A564/A564M-13: Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A653/A653M-15e1: Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A775/A775M-17: Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A182/A182M-16a: Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
B209-14: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
A1011/A1011M-15: Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A574-16: Standard Specification for Alloy Steel Socket-Head Cap Screws
A36/A36M-14: Standard Specification for Carbon Structural Steel
A500/A500M-13: Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
E140-12be1: Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
A193/A193M-16: Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M-17: Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A615/A615M-16: Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A108-13: Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A513/A513M-15: Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A568/A568M-15: Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
B221-14: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
F136-13: Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
A228/A228M-16: Standard Specification for Steel Wire, Music Spring Quality
A536-84(2014): Standard Specification for Ductile Iron Castings
E709-15: Standard Guide for Magnetic Particle Testing
F593-13ae1: Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
A153/A153M-16a: Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A262-15: Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A388/A388M-16a: Standard Practice for Ultrasonic Examination of Steel Forgings
A29/A29M-16: Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
A304-16: Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A788/A788M-17: Standard Specification for Steel Forgings, General Requirements
B912-02(2013): Standard Specification for Passivation of Stainless Steels Using Electropolishing
E3-11: Standard Guide for Preparation of Metallographic Specimens
E415-15: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
F1554-15e1: Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
F899-12b: Standard Specification for Wrought Stainless Steels for Surgical Instruments
A307-14e1: Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
A479/A479M-17: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A961/A961M-16a: Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
E407-07(2015)e1: Standard Practice for Microetching Metals and Alloys
F138-13a: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
A1064/A1064M-17: Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
A312/A312M-17: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A320/A320M-17: Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
A48/A48M-03(2016): Standard Specification for Gray Iron Castings
A694/A694M-16: Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A706/A706M-16: Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
B211-12e1: Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B557-15: Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
E112-13: Standard Test Methods for Determining Average Grain Size
E2375-16: Standard Practice for Ultrasonic Testing of Wrought Products
A1018/A1018M-16a: Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A247-16a: Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
A554-16: Standard Specification for Welded Stainless Steel Mechanical Tubing
A563-15: Standard Specification for Carbon and Alloy Steel Nuts
A572/A572M-15: Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A709/A709M-16a: Standard Specification for Structural Steel for Bridges
A992/A992M-11(2015): Standard Specification for Structural Steel Shapes
B600-11(2017): Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
E466-15: Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
A216/A216M-16: Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A416/A416M-17: Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
A510/A510M-13: Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
A555/A555M-16: Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A582/A582M-12(2017): Standard Specification for Free-Machining Stainless Steel Bars
E110-14: Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
E290-14: Standard Test Methods for Bend Testing of Material for Ductility
E340-15: Standard Practice for Macroetching Metals and Alloys
E45-13: Standard Test Methods for Determining the Inclusion Content of Steel
E647-15e1: Standard Test Method for Measurement of Fatigue Crack Growth Rates
G1-03(2011): Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
A105/A105M-14: Standard Specification for Carbon Steel Forgings for Piping Applications
A351/A351M-16: Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
A484/A484M-16: Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A519-06(2012): Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A529/A529M-14: Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A576-90b(2012): Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A580/A580M-16: Standard Specification for Stainless Steel Wire
A635/A635M-15: Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A743/A743M-13ae1: Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A751-14a: Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A924/A924M-16ae1: Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A957/A957M-15a: Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
E1806-09(2016): Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
E1941-10(2016): Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
E381-01(2012): Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E7-15: Standard Terminology Relating to Metallography
F2063-12: Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
F594-09(2015): Standard Specification for Stainless Steel Nuts
F86-13: Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
G187-12a: Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
G57-06(2012): Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
G85-11: Standard Practice for Modified Salt Spray (Fog) Testing
A109/A109M-16: Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A234/A234M-16: Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A275/A275M-15: Standard Practice for Magnetic Particle Examination of Steel Forgings
A350/A350M-15: Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A463/A463M-15: Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A578/A578M-07(2012): Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
A641/A641M-09a(2014): Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
A666-15: Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A693-16: Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A786/A786M-15: Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A829/A829M-17: Standard Specification for Alloy Structural Steel Plates
A956-12: Standard Test Method for Leeb Hardness Testing of Steel Products
A970/A970M-16: Standard Specification for Headed Steel Bars for Concrete Reinforcement
B201-80(2014): Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
B210-12: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B241/B241M-16: Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B26/B26M-14e1: Standard Specification for Aluminum-Alloy Sand Castings
B527-15: Standard Test Method for Tap Density of Metal Powders and Compounds
B564-15: Standard Specification for Nickel Alloy Forgings
B6-13: Standard Specification for Zinc
E1447-09(2016): Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
F1624-12: Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
F837-13e1: Standard Specification for Stainless Steel Socket Head Cap Screws
G200-09(2014): Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
A1023/A1023M-15: Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
A1038-13e1: Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
A252-10: Standard Specification for Welded and Seamless Steel Pipe Piles
A268/A268M-10(2016): Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A295/A295M-14: Standard Specification for High-Carbon Anti-Friction Bearing Steel
A333/A333M-16: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
A354-11: Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A395/A395M-99(2014): Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A421/A421M-15: Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
A435/A435M-90(2012): Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A516/A516M-10(2015): Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A623-16: Standard Specification for Tin Mill Products, General Requirements
A681-08(2015): Standard Specification for Tool Steels Alloy
A732/A732M-14: Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A781/A781M-17: Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A792/A792M-10(2015): Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A853-04(2017): Standard Specification for Steel Wire, Carbon, for General Use
A941-16: Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A959-16: Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A962/A962M-16b: Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
B152/B152M-13: Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B16/B16M-10(2015): Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B179-14: Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
B209M-14: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
B213-17: Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
B36/B36M-13: Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B449-93(2015): Standard Specification for Chromates on Aluminum
B499-09(2014): Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
B557M-15: Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
B580-79(2014): Standard Specification for Anodic Oxide Coatings on Aluminum
B584-14: Standard Specification for Copper Alloy Sand Castings for General Applications
B637-16: Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
B680-80(2014): Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
B917/B917M-12: Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
C876-15: Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
D1730-09(2014): Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
E1019-11: Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
E1077-14: Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
E50-11(2016): Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
F1043-17: Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
F2247-11(2017): Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
G36-94(2013): Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
G59-97(2014): Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
A1-00(2010): Standard Specification for Carbon Steel Tee Rails
A1016/A1016M-17: Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
A1034/A1034M-10a(2015): Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
A1044/A1044M-16a: Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
A106/A106M-15: Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A242/A242M-13: Standard Specification for High-Strength Low-Alloy Structural Steel
A313/A313M-13: Standard Specification for Stainless Steel Spring Wire
A322-13: Standard Specification for Steel Bars, Alloy, Standard Grades
A449-14: Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A453/A453M-16: Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A488/A488M-17: Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A502-03(2015): Standard Specification for Rivets, Steel, Structural
A505-16: Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A588/A588M-15: Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A606/A606M-15: Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A668/A668M-17: Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A722/A722M-15: Standard Specification for High-Strength Steel Bars for Prestressed Concrete
A747/A747M-16a: Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A753-08(2013): Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A767/A767M-16: Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A789/A789M-17: Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A833-08a(2014): Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A847/A847M-14: Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A848-01(2011): Standard Specification for Low-Carbon Magnetic Iron
A903/A903M-99(2017): Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A973/A973M-07(2012): Standard Specification for Grade 100 Alloy Steel Chain
B136-84(2013): Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
B187/B187M-16: Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
B193-16: Standard Test Method for Resistivity of Electrical Conductor Materials
B194-15: Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B214-16: Standard Test Method for Sieve Analysis of Metal Powders
B253-11: Standard Guide for Preparation of Aluminum Alloys for Electroplating
B254-92(2014): Standard Practice for Preparation of and Electroplating on Stainless Steel
B258-14: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
B330-15: Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
B348-13: Standard Specification for Titanium and Titanium Alloy Bars and Billets
B438-17: Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B505/B505M-14: Standard Specification for Copper Alloy Continuous Castings
B695-04(2016): Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B75/B75M-11: Standard Specification for Seamless Copper Tube
B849-02(2013): Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
B85/B85M-14: Standard Specification for Aluminum-Alloy Die Castings
B86-13: Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B873-17: Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
B88-16: Standard Specification for Seamless Copper Water Tube
D3953-15: Standard Specification for Strapping, Flat Steel and Seals
E1085-16: Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E1086-14: Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
E111-04(2010): Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
E1245-03(2016): Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
E125-63(2013): Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
E135-16: Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
E139-11: Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E155-15: Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
E1681-03(2013): Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
E1820-16: Standard Test Method for Measurement of Fracture Toughness
E561-15a: Standard Test Method for
E562-11: Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
E6-15: Standard Terminology Relating to Methods of Mechanical Testing
E60-11(2016): Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
E716-16: Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
E766-14e1: Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
E94-04(2010): Standard Guide for Radiographic Examination
F1295-16: Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
F1537-11: Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
F1575-17: Standard Test Method for Determining Bending Yield Moment of Nails
F2215-15: Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
F2282-15: Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
F2459-12: Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
F2514-08(2014): Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
F2516-14: Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
F382-14: Standard Specification and Test Method for Metallic Bone Plates
F68-16: Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
F835-16: Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
G4-01(2014): Standard Guide for Conducting Corrosion Tests in Field Applications
G46-94(2013): Standard Guide for Examination and Evaluation of Pitting Corrosion
G48-11(2015): Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
G94-05(2014): Standard Guide for Evaluating Metals for Oxygen Service
A1010/A1010M-13: Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
A1021/A1021M-05(2015): Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
A1039/A1039M-13: Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
A1046/A1046M-17: Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
A1067/A1067M-12a: Standard Specification for Test Coupons for Steel Castings
A131/A131M-14: Standard Specification for Structural Steel for Ships
A139/A139M-16: Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A143/A143M-07(2014): Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A148/A148M-15a: Standard Specification for Steel Castings, High Strength, for Structural Purposes
A159-83(2015): Standard Specification for Automotive Gray Iron Castings
A213/A213M-17: Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A217/A217M-14: Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A255-10(2014): Standard Test Methods for Determining Hardenability of Steel
A27/A27M-17: Standard Specification for Steel Castings, Carbon, for General Application
A270/A270M-15: Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
A291/A291M-16a: Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A314-15: Standard Specification for Stainless Steel Billets and Bars for Forging
A319-71(2015): Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
A336/A336M-15: Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A352/A352M-06(2012): Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A358/A358M-15: Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A387/A387M-17: Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A391/A391M-07(2012): Standard Specification for Grade 80 Alloy Steel Chain
A401/A401M-15: Standard Specification for Steel Wire, Chromium-Silicon Alloy
A403/A403M-16: Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A450/A450M-15: Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
A470/A470M-05(2015): Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A493-16: Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A514/A514M-14: Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A530/A530M-12: Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A534-14: Standard Specification for Carburizing Steels for Anti-Friction Bearings
A540/A540M-15: Standard Specification for Alloy-Steel Bolting for Special Applications
A581/A581M-95b(2014): Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A586-04a(2014): Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
A609/A609M-12: Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A623M-16: Standard Specification for Tin Mill Products, General Requirements [Metric]
A656/A656M-13: Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A673/A673M-07(2012): Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A677-16: Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A684/A684M-15: Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A707/A707M-14: Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A710/A710M-02(2013): Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A733-16: Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A744/A744M-13: Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A764-07(2012): Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A773/A773M-14: Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
A787/A787M-15a: Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A804/A804M-04(2015): Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A834-95(2015): Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A837/A837M-06(2016): Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A879/A879M-12(2017): Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A890/A890M-13: Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A897/A897M-16: Standard Specification for Austempered Ductile Iron Castings
A923-14: Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A976-13: Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
A991/A991M-17: Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A999/A999M-16: Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
B111/B111M-16: Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B115-10(2016): Standard Specification for Electrolytic Copper Cathode
B124/B124M-17: Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B137-95(2014): Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
B150/B150M-12(2017): Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
B151/B151M-13: Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B170-99(2015): Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
B19-15: Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
B196/B196M-07(2013)e1: Standard Specification for Copper-Beryllium Alloy Rod and Bar
B215-15: Standard Practices for Sampling Metal Powders
B221M-13: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
B249/B249M-17: Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B265-15: Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B280-16: Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B281-88(2013): Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
B283/B283M-17: Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B294-10: Standard Test Method for Hardness Testing of Cemented Carbides
B298-12(2017): Standard Specification for Silver-Coated Soft or Annealed Copper Wire
B3-13: Standard Specification for Soft or Annealed Copper Wire
B32-08(2014): Standard Specification for Solder Metal
B322-99(2014): Standard Guide for Cleaning Metals Prior to Electroplating
B33-10(2014): Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
B339-12: Standard Specification for Pig Tin
B393-09e1: Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
B446-03(2014): Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
B539-02(2013): Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
B574-15: Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
B594-13: Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
B601-16: Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
B647-10(2016): Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
B648-10(2015)e1: Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B703-10: Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
B735-16: Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
B776-12: Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
B80-15: Standard Specification for Magnesium-Alloy Sand Castings
B800-05(2015): Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
B801-16: Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
B813-16: Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
B819-00(2011): Standard Specification for Seamless Copper Tube for Medical Gas Systems
B824-17: Standard Specification for General Requirements for Copper Alloy Castings
B828-16: Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
B841-99(2010): Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
B850-98(2015): Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
B858-06(2012): Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B880-14: Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
B886-12: Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
B895-16: Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
B910/B910M-07(2013): Standard Specification for Annealed Copper-Clad Steel Wire
B918/B918M-09: Standard Practice for Heat Treatment of Wrought Aluminum Alloys
B922-17: Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
B935-16: Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
B94-13: Standard Specification for Magnesium-Alloy Die Castings
B949-13: Standard Specification for General Requirements for Zinc and Zinc Alloy Products
B964-16: Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
C847-14a: Standard Specification for Metal Lath
D609-00(2012): Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
E1032-12: Standard Test Method for Radiographic Examination of Weldments
E1251-11: Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
E1268-01(2016): Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
E1312-09(2013)e1: Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
E132-04(2010): Standard Test Method for Poisson's Ratio at Room Temperature
E1382-97(2015): Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
E190-14: Standard Test Method for Guided Bend Test for Ductility of Welds
E1915-13: Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
E1999-11: Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
E2001-13: Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
E21-09: Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E2109-01(2014): Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
E2422-11: Standard Digital Reference Images for Inspection of Aluminum Castings
E2594-09(2014): Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
E280-15: Standard Reference Radiographs for Heavy-Walled (4
E350-12: Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E399-12e3: Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K
E505-15: Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
E570-15e1: Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
E572-13: Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E606/E606M-12: Standard Test Method for Strain-Controlled Fatigue Testing
E646-16: Standard Test Method for Tensile Strain-Hardening Exponents (
E689-15: Standard Reference Radiographs for Ductile Iron Castings
E9-09: Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
E915-16: Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
E930-99(2015): Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
F1044-05(2011)e1: Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
F1744-96(2016): Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
F2004-16: Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
F2408-16: Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
F2633-13: Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
F432-13: Standard Specification for Roof and Rock Bolts and Accessories
F543-17: Standard Specification and Test Methods for Metallic Medical Bone Screws
F560-13e1: Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
F668-17: Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
G102-89(2015)e1: Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
G110-92(2015): Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
G123-00(2015): Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
G16-13: Standard Guide for Applying Statistics to Analysis of Corrosion Data
G161-00(2013): Standard Guide for Corrosion-Related Failure Analysis
G165-99(2012): Standard Practice for Determining Rail-to-Earth Resistance
G189-07(2013): Standard Guide for Laboratory Simulation of Corrosion Under Insulation
G3-14: Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
G30-97(2016): Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
G5-14: Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
G51-95(2012): Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
G78-15: Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
G87-02(2013): Standard Practice for Conducting Moist SO
G97-97(2013): Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
A100-07(2012): Standard Specification for Ferrosilicon
A1003/A1003M-15: Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1007-15: Standard Specification for Carbon Steel Wire for Wire Rope
A1014/A1014M-16: Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
A1022/A1022M-16b: Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1033-10(2015): Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
A1035/A1035M-16b: Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
A1040-10(2015)e1: Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1058-14: Standard Test Methods for Mechanical Testing of Steel Products—Metric
A1059/A1059M-08(2013): Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
A1060/A1060M-16b: Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1061/A1061M-16: Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
A1063/A1063M-17: Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1072/A1072M-11(2015): Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
A1073/A1073M-16: Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
A1075-12: Standard Specification for Flanged Steel U-Channel Posts
A1080-15: Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
A1082/A1082M-16: Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
A125-96(2013)e1: Standard Specification for Steel Springs, Helical, Heat-Treated
A126-04(2014): Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A178/A178M-02(2012): Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179/A179M-90a(2012): Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A183-14: Standard Specification for Carbon Steel Track Bolts and Nuts
A192/A192M-02(2012): Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A197/A197M-00(2015): Standard Specification for Cupola Malleable Iron
A209/A209M-03(2017): Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A210/A210M-02(2012): Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A214/A214M-96(2012): Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A227/A227M-06(2017): Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A230/A230M-05(2011)e1: Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
A232/A232M-05(2011)e1: Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A249/A249M-16a: Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A254/A254M-12: Standard Specification for Copper-Brazed Steel Tubing
A264-12: Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
A278/A278M-01(2015): Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A283/A283M-13: Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A290/A290M-16: Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A297/A297M-17: Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A311/A311M-04(2015): Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A328/A328M-13a: Standard Specification for Steel Sheet Piling
A342/A342M-14: Standard Test Methods for Permeability of Weakly Magnetic Materials
A343/A343M-14: Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A348/A348M-05(2015): Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A363-03(2014): Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A369/A369M-11(2016): Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A372/A372M-16: Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A392-11a: Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A394-08(2015): Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A420/A420M-16: Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A424/A424M-09a(2016): Standard Specification for Steel, Sheet, for Porcelain Enameling
A471/A471M-09(2014): Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A473-17: Standard Specification for Stainless Steel Forgings
A475-03(2014): Standard Specification for Zinc-Coated Steel Wire Strand
A476/A476M-00(2014): Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A483/A483M-10(2015): Standard Specification for Silicomanganese
A487/A487M-14: Standard Specification for Steel Castings Suitable for Pressure Service
A489-12: Standard Specification for Carbon Steel Lifting Eyes
A494/A494M-17: Standard Specification for Castings, Nickel and Nickel Alloy
A499-15: Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
A504/A504M-14: Standard Specification for Wrought Carbon Steel Wheels
A508/A508M-17: Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A515/A515M-10(2015): Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A521/A521M-06(2016): Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A561-08(2014): Standard Practice for Macroetch Testing of Tool Steel Bars
A565/A565M-10(2017)e1: Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A573/A573M-13: Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A577/A577M-90(2012): Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A579/A579M-17: Standard Specification for Superstrength Alloy Steel Forgings
A595/A595M-14: Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A596/A596M-14: Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A600-92a(2016): Standard Specification for Tool Steel High Speed
A604/A604M-07(2017): Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A612/A612M-12: Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A618/A618M-04(2015): Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A627-03(2011): Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A630-16ae1: Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A657/A657M-13: Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A662/A662M-12: Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A679/A679M-06(2012): Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A688/A688M-15: Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
A690/A690M-13a: Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
A703/A703M-17: Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A711/A711M-07(2012): Standard Specification for Steel Forging Stock
A719/A719M-14: Standard Test Method for Lamination Factor of Magnetic Materials
A746-09(2014): Standard Specification for Ductile Iron Gravity Sewer Pipe
A755/A755M-16e1: Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A757/A757M-15: Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A759-10(2016): Standard Specification for Carbon Steel Crane Rails
A760/A760M-15: Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A763-15: Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A769/A769M-05(2010): Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
A770/A770M-03(2012)e1: Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A774/A774M-14: Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A790/A790M-16: Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A793-96(2014): Standard Specification for Rolled Floor Plate, Stainless Steel
A796/A796M-17: Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A801-14: Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
A820/A820M-16: Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A830/A830M-14: Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A836/A836M-14: Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A866-14: Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A875/A875M-13: Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A876-12: Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A877/A877M-17: Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
A882/A882M-04a(2010): Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
A892-09(2014)e1: Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A898/A898M-07(2012): Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A906/A906M-02(2016): Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A908-03(2013): Standard Specification for Stainless Steel Needle Tubing
A910/A910M-16: Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
A913/A913M-15: Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A915/A915M-08(2013): Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A929/A929M-17: Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A931-08(2013): Standard Test Method for Tension Testing of Wire Ropes and Strand
A934/A934M-16: Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A937/A937M-12: Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A938-07(2013): Standard Test Method for Torsion Testing of Wire
A944-10(2015): Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A947M-16: Standard Specification for Textured Stainless Steel Sheet [Metric]
A951/A951M-16: Standard Specification for Steel Wire for Masonry Joint Reinforcement
A955/A955M-17: Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
A958/A958M-17: Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A960/A960M-16a: Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A966/A966M-15: Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A975-11(2016): Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A990/A990M-14a: Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A995/A995M-13: Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
B103/B103M-15: Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
B105-05(2012): Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
B108/B108M-15: Standard Specification for Aluminum-Alloy Permanent Mold Castings
B122/B122M-16: Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B134/B134M-15: Standard Specification for Brass Wire
B135M-10: Standard Specification for Seamless Brass Tube [Metric]
B139/B139M-12(2017): Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
B148-14: Standard Specification for Aluminum-Bronze Sand Castings
B153-11(2017): Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154-16: Standard Test Method for Mercurous Nitrate Test for Copper Alloys
B162-99(2014): Standard Specification for Nickel Plate, Sheet, and Strip
B166-11: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,
B212-13: Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
B23-00(2014): Standard Specification for White Metal Bearing Alloys
B232/B232M-11: Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
B240-13: Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B243-16a: Standard Terminology of Powder Metallurgy
B246-15: Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
B250/B250M-16: Standard Specification for General Requirements for Wrought Copper Alloy Wire
B251-10: Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B263/B263M-14: Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
B286-07(2012): Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
B30-16: Standard Specification for Copper Alloys in Ingot Form
B302-12: Standard Specification for Threadless Copper Pipe, Standard Sizes
B311-17: Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
B313/B313M-09: Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
B317/B317M-07(2015)e1: Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
B344-14: Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
B345/B345M-11: Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
B359/B359M-15: Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B365-12: Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
B369-09(2016): Standard Specification for Copper-Nickel Alloy Castings
B370-12: Standard Specification for Copper Sheet and Strip for Building Construction
B386-03(2011): Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
B416-98(2013): Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B417-13: Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
B418-16a: Standard Specification for Cast and Wrought Galvanic Zinc Anodes
B42-15a: Standard Specification for Seamless Copper Pipe, Standard Sizes
B425-11: Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar
B429/B429M-10e1: Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B441-16: Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
B443-00(2014): Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy
B444-16e1: Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys
B453/B453M-11e1: Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
B462-15: Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045, UNS N06025, UNS R20033 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
B470-02(2017): Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
B48-00(2016): Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
B481-68(2013): Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
B528-16: Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
B530-09(2014): Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
B551/B551M-12: Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
B565-04(2015): Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
B566-04a(2016): Standard Specification for Copper-Clad Aluminum Wire
B570-16: Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
B577-16: Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
B593-96(2014)e1: Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
B61-15: Standard Specification for Steam or Valve Bronze Castings
B62-17: Standard Specification for Composition Bronze or Ounce Metal Castings
B622-15e1: Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B643-12(2016): Standard Specification for Copper-Beryllium Alloy Seamless Tube
B645-10(2015): Standard Practice for Linear-Elastic Plane–Strain Fracture Toughness Testing of Aluminum Alloys
B661-12: Standard Practice for Heat Treatment of Magnesium Alloys
B670-07(2013): Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
B678-86(2011): Standard Test Method for Solderability of Metallic-Coated Products
B708-12: Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
B717-96(2012): Standard Specification for Refined Ruthenium
B737-10(2015): Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
B743-12: Standard Specification for Seamless Copper Tube in Coils
B753-07(2013): Standard Specification for Thermostat Component Alloys
B774-00(2014): Standard Specification for Low Melting Point Alloys
B777-15: Standard Specification for Tungsten Base, High-Density Metal
B783-13: Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
B797-15: Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
B8-11(2017): Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
B805-06(2017)e1: Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
B806-14: Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
B822-17: Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
B827-05(2014): Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
B829-04a(2017): Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
B833-13: Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
B843-13: Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
B845-97(2013)e1: Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
B846-11a: Standard Terminology for Copper and Copper Alloys
B851-04(2014): Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
B855-11: Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
B883-15: Standard Specification for Metal Injection Molded (MIM) Materials
B884-11: Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
B887-12: Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
B888/B888M-17: Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
B90/B90M-15: Standard Specification for Magnesium-Alloy Sheet and Plate
B906-02(2012): Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
B911/B911M-12(2016): Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
B920-16: Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
B921-08(2013): Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
B925-15: Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
B926-09: Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
B933-16: Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
B941-16: Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
B943-16: Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
B962-17: Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
B968/B968M-16: Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
B98/B98M-13: Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
B985-12(2016): Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
C1582/C1582M-11: Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
C564-14: Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C692-13: Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C933-14: Standard Specification for Welded Wire Lath
D2651-01(2016): Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
D3933-98(2010): Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
D4340-10: Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
D4975-14: Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel
D6320/D6320M-10(2014): Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
E1180-08(2014): Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
E1181-02(2015): Standard Test Methods for Characterizing Duplex Grain Sizes
E127-15: Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks
E1306-11: Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
E1335-08(2017): Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
E1351-01(2012): Standard Practice for Production and Evaluation of Field Metallographic Replicas
E1409-13: Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
E1450-16: Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
E1473-16: Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys
E1558-09(2014): Standard Guide for Electrolytic Polishing of Metallographic Specimens
E164-13: Standard Practice for Contact Ultrasonic Testing of Weldments
E1734-16a: Standard Practice for Radioscopic Examination of Castings
E1823-13: Standard Terminology Relating to Fatigue and Fracture Testing
E186-15: Standard Reference Radiographs for Heavy-Walled (2 to 4
E1916-11: Standard Guide for Identification of Mixed Lots of Metals
E194-10(2015): Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
E1951-14: Standard Guide for Calibrating Reticles and Light Microscope Magnifications
E208-06(2012): Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
E213-14e1: Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
E2142-08(2015): Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
E2207-15: Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
E2218-15: Standard Test Method for Determining Forming Limit Curves
E2248-15: Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
E2283-08(2014): Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
E2298-15: Standard Test Method for Instrumented Impact Testing of Metallic Materials
E2349-12: Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
E2368-10: Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
E2371-13: Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
E238-17a: Standard Test Method for Pin-Type Bearing Test of Metallic Materials
E2465-13: Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E2492-07(2012): Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
E252-06(2013): Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
E2546-15: Standard Practice for Instrumented Indentation Testing
E2714-13: Standard Test Method for Creep-Fatigue Testing
E272-15: Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
E2760-16: Standard Test Method for Creep-Fatigue Crack Growth Testing
E2775-16: Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
E2860-12: Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
E292-09e1: Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
E328-13: Standard Test Methods for Stress Relaxation Tests for Materials and Structures
E34-11e1: Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
E345-16: Standard Test Methods of Tension Testing of Metallic Foil
E352-13: Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E372-13: Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration
E428-08(2013): Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing
E478-08(2017): Standard Test Methods for Chemical Analysis of Copper Alloys
E539-11: Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
E633-13: Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
E802-15: Standard Reference Radiographs for Gray Iron Castings Up to 4
E855-08(2013): Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
E975-13: Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
F1058-16: Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
F1083-16: Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
F1108-14: Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
F1147-05(2011): Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
F1160-14: Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
F1267-15: Standard Specification for Metal, Expanded, Steel
F1325-91(2016): Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
F1377-13: Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
F139-12: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
F1472-14: Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
F1710-08(2016): Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
F2009-00(2011): Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
F2068-15: Standard Specification for Femoral Prostheses—Metallic Implants
F2443-04(2012): Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
F30-96(2012): Standard Specification for Iron-Nickel Sealing Alloys
F44-16: Standard Specification for Metallized Surfaces on Ceramic
F468-16: Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
F562-13: Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
F564-10(2015): Standard Specification and Test Methods for Metallic Bone Staples
F629-15: Standard Practice for Radiography of Cast Metallic Surgical Implants
F680-80(2012): Standard Test Methods for Nails
F7-95(2016): Standard Specification for Aluminum Oxide Powder
F75-12: Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
F844-07a(2013): Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
F879-15: Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
F959-15: Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
F961-14: Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
G101-04(2015): Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
G109-07(2013): Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
G111-97(2013): Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
G148-97(2011): Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
G162-99(2010): Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
G180-13: Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
G185-06(2016): Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
G192-08(2014): Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
G28-02(2015): Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
G34-01(2013): Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
G37-98(2016): Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
G47-98(2011): Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
G50-10(2015): Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
G61-86(2014): Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
G69-12: Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
G71-81(2014): Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
Copyright © 1996 - 2014 ASTM. All Rights Reserved. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA
