Popular Manufacturing Standards

Search within Manufacturing

B633-19: Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

B912-02(2018): Standard Specification for Passivation of Stainless Steels Using Electropolishing

B733-15: Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal

D4541-17: Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

E165/E165M-18: Standard Practice for Liquid Penetrant Testing for General Industry

E1934-99a(2018): Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

A388/A388M-18: Standard Practice for Ultrasonic Examination of Steel Forgings

A484/A484M-18a: Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

A6/A6M-17a: Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

A780/A780M-09(2015): Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

A792/A792M-10(2015): Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

A924/A924M-18: Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

B571-18: Standard Practice for Qualitative Adhesion Testing of Metallic Coatings

D4060-14: Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

D7091-13: Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

E1135-19: Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

E1742/E1742M-18: Standard Practice for Radiographic Examination

E2930-13: Standard Practice for Pressure Decay Leak Test Method

E376-17: Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods

F3125/F3125M-18: Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength

A307-14e1: Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

A358/A358M-15: Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

A514/A514M-18: Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

A641/A641M-09a(2014): Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire

B221M-13: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

B280-18: Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

B281-88(2019)e1: Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings

B499-09(2014): Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

B501-10(2015): Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application

B507-14: Standard Practice for Design of Articles to Be Electroplated on Racks

B545-13: Standard Specification for Electrodeposited Coatings of Tin

B637-18: Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

B650-95(2018): Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

B661-12: Standard Practice for Heat Treatment of Magnesium Alloys

B745/B745M-15: Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

B841-18: Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits

B850-98(2015): Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement

C1002-18: Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

C1802-18b: Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Horizontal Access Hatches for Utility, Water, and Wastewater Structures

C954-18: Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

D2199-03(2013): Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers

D2774-12: Standard Practice for Underground Installation of Thermoplastic Pressure Piping

D2794-93(2019): Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

D3212-07(2013): Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

D4417-14: Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

D4703-16: Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

D522/D522M-17: Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

D6944-15: Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling

D7378-16: Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness

D823-18: Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels

E1817-08(2014): Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

E192-15: Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications

E1932-12(2017): Standard Guide for Acoustic Emission Examination of Small Parts

E2001-18: Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

E2007-10(2016): Standard Guide for Computed Radiography

E2339-15: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E2445/E2445M-14: Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems

E251-92(2014): Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages

E2581-14: Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications

E2624-17: Standard Practice for Torque Calibration of Testing Machines

E2699-18: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

E2738-18: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

E3068-17e1: Standard Test Method for Contact Measurement of Backface Deformation in Clay Backing During Body Armor Testing

E515-11(2018): Standard Practice for Leaks Using Bubble Emission Techniques

E566-19: Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals

E703-14: Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals

E797/E797M-15: Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

F1043-18: Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

F1136/F1136M-11(2019): Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

F1137/F1137M-18: Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

F2924-14: Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion

F3049-14: Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

F3124-15e1: Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion Joints in Plastic Piping Systems or Fittings

F836M-16e1: Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)

G105-16: Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests

G115-10(2018): Standard Guide for Measuring and Reporting Friction Coefficients

G55-07(2013): Standard Test Method for Evaluating Pipeline Coating Patch Materials

G8-96(2010): Standard Test Methods for Cathodic Disbonding of Pipeline Coatings