Popular Health Care & Medical Devices Standards

Search within Health Care & Medical Devices


F1980-16: Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices

F1929-15: Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

E2500-13: Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment

F136-13: Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)

F899-12b: Standard Specification for Wrought Stainless Steels for Surgical Instruments

F138-13a: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

F2213-17: Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment

F2503-13: Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment

E2810-11(2017): Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units

F2052-15: Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment

F2119-07(2013): Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants

F2182-11a: Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging

E1112-00(2011): Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature

F2026-16: Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

F2063-12: Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants

F2129-17: Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

F619-14: Standard Practice for Extraction of Medical Plastics

F86-13: Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants

E2180-07(2017): Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials

F1185-03(2014): Standard Specification for Composition of Hydroxylapatite for Surgical Implants

F2077-17: Test Methods For Intervertebral Body Fusion Devices

F838-15a: Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration

D6978-05(2013): Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs

F1264-16e1: Standard Specification and Test Methods for Intramedullary Fixation Devices

F2097-16: Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products

F2624-12(2016): Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs

F451-16: Standard Specification for Acrylic Bone Cement

D6124-06(2017): Standard Test Method for Residual Powder on Medical Gloves

E1053-11: Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces

E1965-98(2016): Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature

E2274-16: Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants

F1089-10: Standard Test Method for Corrosion of Surgical Instruments

F1295-16: Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)

F1537-11: Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)

F1582-98(2016): Standard Terminology Relating to Spinal Implants

F1717-15: Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

F2214-16: Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)

F2423-11(2016): Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses

F2459-12: Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis

F2514-08(2014): Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading

F2516-14: Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials

F2847-17: Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments

F382-17: Standard Specification and Test Method for Metallic Bone Plates

F623-99(2013): Standard Performance Specification for Foley Catheter

F732-17: Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

F748-16: Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices

F756-17: Standard Practice for Assessment of Hemolytic Properties of Materials

B819-00(2011): Standard Specification for Seamless Copper Tube for Medical Gas Systems

D5151-06(2015): Standard Test Method for Detection of Holes in Medical Gloves

D6319-10(2015): Standard Specification for Nitrile Examination Gloves for Medical Application

D7160-16: Standard Practice for Determination of Expiration Dating for Medical Gloves

D7225-13: Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors

E1054-08(2013): Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents

E1115-11: Standard Test Method for Evaluation of Surgical Hand Scrub Formulations

E1174-13: Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations

E1428-15a: Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)

E1837-96(2014): Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test)

E2314-03(2014): Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)

E2537-16: Standard Guide for Application of Continuous Process Verification to Pharmaceutical and Biopharmaceutical Manufacturing

F1044-05(2011)e1: Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

F1088-04a(2010): Standard Specification for Beta-Tricalcium Phosphate for Surgical Implantation

F116-12(2016): Standard Specification for Medical Screwdriver Bits

F1223-14: Standard Test Method for Determination of Total Knee Replacement Constraint

F1581-08(2016): Standard Specification for Composition of Anorganic Bone for Surgical Implants

F1635-16: Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

F1671/F1671M-13: Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System

F1744-96(2016): Standard Guide for Care and Handling of Stainless Steel Surgical Instruments

F1798-13: Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants

F1820-13: Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices

F1829-16: Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear

F1830-97(2017): Standard Practice for Selection of Blood for in vitro Evaluation of Blood Pumps

F1840-10(2016): Standard Terminology for Surgical Suture Needles

F1841-97(2017): Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps

F1862/F1862M-17: Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)

F1875-98(2014): Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface

F1984-99(2013): Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials

F2004-17: Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis

F2028-14: Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation

F2100-11: Standard Specification for Performance of Materials Used in Medical Face Masks

F2150-13: Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products

F2172-02(2011): Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers

F2256-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading

F2267-04(2011): Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

F2299/F2299M-03(2017): Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres

F2382-17: Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT)

F2383-11: Standard Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs)

F2529-13: Standard Guide for in vivo Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM)

F2554-10: Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems

F2579-10: Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants

F2580-13: Standard Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis

F2582-14: Standard Test Method for Impingement of Acetabular Prostheses

F2633-13: Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants

F2694-16: Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses

F2754/F2754M-09(2013): Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire

F2777-16: Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion

F2848-17: Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns

F2884-12: Standard Guide for Pre-clinical in vivo Evaluation of Spinal Fusion

F2888-13: Standard Test Method for Platelet Leukocyte Count—An In-Vitro Measure for Hemocompatibility Assessment of Cardiovascular Materials

F2977-13: Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants

F543-17: Standard Specification and Test Methods for Metallic Medical Bone Screws

F560-13e1: Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)

F763-04(2016): Standard Practice for Short-Term Screening of Implant Materials

C1473-11: Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry

D3577-09(2015): Standard Specification for Rubber Surgical Gloves

D3578-05(2015): Standard Specification for Rubber Examination Gloves

D3579-77(2016): Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type

D4774-11e1: Standard Specification for User Applied Drug Labels in Anesthesiology

D5250-06(2015): Standard Specification for Poly(vinyl chloride) Gloves for Medical Application

D6355-07(2017): Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves

D6977-04(2016): Standard Specification for Polychloroprene Examination Gloves for Medical Application

D7161-16: Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions

E1326-15a: Standard Guide for Evaluating Non-culture Microbiological Tests

E1714-07(2013): Standard Guide for Properties of a Universal Healthcare Identifier (UHID)

E1874-14: Standard Test Method for Recovery of Microorganisms From Skin using the Cup Scrub Technique

E2011-13: Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand

E2149-13a: Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions

E2197-11: Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides

E2276-10: Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults

E2315-16: Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure

E2362-15: Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection

E2363-14: Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry

E2475-10(2016): Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control

E2476-16: Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture

E2503-13e1: Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus

E2524-08(2013): Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles

E2562-17: Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with High Shear and Continuous Flow using CDC Biofilm Reactor

E2614-15: Standard Guide for Evaluation of Cleanroom Disinfectants

E2629-11: Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems

E2647-13: Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown Using Drip Flow Biofilm Reactor with Low Shear and Continuous Flow

E2737-10: Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

E2755-15: Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Healthcare Personnel Hand Rub Formulations Using Hands of Adults

E2799-17: Standard Test Method for Testing Disinfectant Efficacy against Pseudomonas aeruginosa Biofilm using the MBEC Assay

E2871-13: Standard Test Method for Evaluating Disinfectant Efficacy Against Pseudomonas aeruginosa Biofilm Grown in CDC Biofilm Reactor Using Single Tube Method

E2896-12: Standard Test Method for Quantitative Petri Plate Method (QPM) for Determining the Effectiveness of Antimicrobial Towelettes

E934-94(2015): Standard Specification for Serological Pipet, Disposable Plastic

F1058-16: Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)

F1108-14: Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)

F1147-05(2017)e1: Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings

F1160-14: Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings

F1325-91(2016): Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods

F1357-14: Standard Specification for Articulating Total Wrist Implants

F1377-13: Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)

F1378-12: Standard Specification for Shoulder Prostheses

F139-12: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

F1408-97(2013): Standard Practice for Subcutaneous Screening Test for Implant Materials

F1441-03(2014): Standard Specification for Soft-Tissue Expander Devices

F1472-14: Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)

F1538-03(2017): Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation

F1672-14: Standard Specification for Resurfacing Patellar Prosthesis

F1714-96(2013): Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices

F1781-15: Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants

F1814-15: Standard Guide for Evaluating Modular Hip and Knee Joint Components

F1839-08(2016): Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments

F1854-15: Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants

F1855-00(2011): Standard Specification for Polyoxymethylene (Acetal) for Medical Applications

F1877-16: Standard Practice for Characterization of Particles

F1925-09: Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants

F1983-14: Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications

F2003-02(2015): Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air

F2009-00(2011): Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses

F2024-10(2016): Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings

F2027-16: Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products

F2038-00(2011): Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials

F2042-00(2011): Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication

F2051-00(2014): Standard Specification for Implantable Saline Filled Breast Prosthesis

F2068-15: Standard Specification for Femoral Prostheses—Metallic Implants

F2091-15: Standard Specification for Acetabular Prostheses

F2193-14: Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System

F2212-11: Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)

F2224-09(2014): Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants

F2255-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading

F2258-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in Tension

F2313-10: Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide

F2385-15: Standard Practice for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs

F2392-04(2015): Standard Test Method for Burst Strength of Surgical Sealants

F2401-16: Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices

F2407-06(2013)e1: Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities

F2458-05(2015): Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants

F2475-11: Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials

F2665-09(2014): Standard Specification for Total Ankle Replacement Prosthesis

F2706-17: Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model

F2722-15: Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops

F2723-13a: Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation

F2761-09(2013): Medical Devices and Medical Systems - Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) - Part 1: General requirements and conceptual model

F2778-09(2015): Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)

F2790-10(2014): Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses

F2791-15: Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions

F2809-10: Standard Terminology Relating to Medical and Surgical Materials and Devices

F2819-10(2015)e2: Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices

F2820-12: Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications

F2887-17: Standard Specification for Total Elbow Prostheses

F2902-16e1: Standard Guide for Assessment of Absorbable Polymeric Implants

F2903-11: Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair

F2914-12: Standard Guide for Identification of Shelf-life Test Attributes for Endovascular Devices

F2942-13: Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents

F2996-13: Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems

F562-13: Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)

F564-17: Standard Specification and Test Methods for Metallic Bone Staples

F565-04(2013): Standard Practice for Care and Handling of Orthopedic Implants and Instruments

F629-15: Standard Practice for Radiography of Cast Metallic Surgical Implants

F640-12: Standard Test Methods for Determining Radiopacity for Medical Use

F648-14: Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

F720-17: Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test

F75-12: Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)

F754-08(2015): Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders

F881-94(2014): Standard Specification for Silicone Elastomer Facial Implants

F895-11(2016): Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity

F961-14: Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

F983-86(2013): Standard Practice for Permanent Marking of Orthopaedic Implant Components

G175-13: Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications