Popular Environment Standards

Search within Environment


E2018-15: Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process

E1527-13: Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process

E2247-16: Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland or Rural Property

D1193-06(2011): Standard Specification for Reagent Water

E1528-14e1: Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process

D6938-17: Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

E2600-15: Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions

D1557-12e1: Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

E1903-11: Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process

D2487-11: Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

D698-12e2: Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

D7338-14: Standard Guide for Assessment Of Fungal Growth in Buildings

D5755-09(2014)e1: Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading

D6480-05(2010): Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy

E662-17a: Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

G93-03(2011): Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments

D1140-17: Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

D1125-14: Standard Test Methods for Electrical Conductivity and Resistivity of Water

D4318-17: Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

D2216-10: Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

D635-14: Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

E2356-14: Standard Practice for Comprehensive Building Asbestos Surveys

E2893-16e1: Standard Guide for Greener Cleanups

E337-15: Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)

D3385-09: Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

D6348-12e1: Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy

D7390-07(2012): Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments

D7520-16: Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere

E2856-13: Standard Guide for Estimation of LNAPL Transmissivity

G187-12a: Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

G57-06(2012): Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method

G88-13: Standard Guide for Designing Systems for Oxygen Service

D1929-16: Standard Test Method for Determining Ignition Temperature of Plastics

D4435-13e1: Standard Test Method for Rock Bolt Anchor Pull Test

D4840-99(2010): Standard Guide for Sampling Chain-of-Custody Procedures

D512-12: Standard Test Methods for Chloride Ion In Water

D5907-13: Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water

D6281-15: Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)

D6522-11: Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers

D7789-12: Standard Practice for Collection of Fungal Material from Surfaces by Swab

E1689-95(2014): Standard Guide for Developing Conceptual Site Models for Contaminated Sites

E2107-06(2014): Standard Practice for Environmental Regulatory Compliance Audits

G200-09(2014): Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil

D2488-17: Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)

D4327-11: Standard Test Method for Anions in Water by Suppressed Ion Chromatography

D4972-13: Standard Test Method for pH of Soils

D5084-16a: Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

D5731-16: Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

D6008-96(2014): Standard Practice for Conducting Environmental Baseline Surveys

D6245-12: Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

D888-12e1: Standard Test Methods for Dissolved Oxygen in Water

E1739-95(2015): Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites

F2534-17: Standard Guide for Visually Estimating Oil Spill Thickness on Water

G147-17: Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests

C977-10: Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

D1293-12: Standard Test Methods for pH of Water

D2974-14: Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils

D3195/D3195M-10(2015): Standard Practice for Rotameter Calibration

D5116-10: Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products

D5447-04(2010): Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem

D5718-13: Standard Guide for Documenting a Groundwater Flow Model Application

D6329-98(2015): Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers

D6602-13: Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

D6919-17: Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography

D7036-16: Standard Practice for Competence of Air Emission Testing Bodies

E1216-11(2016): Standard Practice for Sampling for Particulate Contamination by Tape Lift

E2137-17: Standard Guide for Estimating Monetary Costs and Liabilities for Environmental Matters

E2205/E2205M-02(2014): Standard Guide for Risk-Based Corrective Action for Protection of Ecological Resources

F316-03(2011): Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test

F331-13: Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)

G63-15: Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service

G7/G7M-13: Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials

C1463-13: Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis

D1067-16: Standard Test Methods for Acidity or Alkalinity of Water

D1068-15: Standard Test Methods for Iron in Water

D1141-98(2013): Standard Practice for the Preparation of Substitute Ocean Water

D1179-16: Standard Test Methods for Fluoride Ion in Water

D1385-07(2013)e1: Standard Test Method for Hydrazine in Water

D1971-16: Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry

D2688-15e1: Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)

D3370-10: Standard Practices for Sampling Water from Closed Conduits

D3483-14: Standard Test Methods for Accumulated Deposition in a Steam Generator Tube

D3648-14: Standard Practices for the Measurement of Radioactivity

D3801-10: Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

D3967-16: Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

D3977-97(2013)e1: Standard Test Methods for Determining Sediment Concentration in Water Samples

D4192-15: Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry

D4253-16: Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

D4254-16: Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

D4448-01(2013): Standard Guide for Sampling Ground-Water Monitoring Wells

D4453-17: Standard Practice for Handling of High Purity Water Samples

D4647/D4647M-13: Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test

D4913-00(2016): Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors

D5093-15: Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring

D516-16: Standard Test Method for Sulfate Ion in Water

D5197-16: Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)

D5198-09: Standard Practice for Nitric Acid Digestion of Solid Waste

D5299-99(2012)e1: Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

D5391-14: Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample

D5465-16: Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods

D5519-15: Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials

D5746-98(2016): Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities

D5791-95(2017): Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings

D5952-08(2015): Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)

D6169/D6169M-13: Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

D6196-15: Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air

D6429-99(2011)e1: Standard Guide for Selecting Surface Geophysical Methods

D6430-99(2010): Standard Guide for Using the Gravity Method for Subsurface Investigation

D6572-13e2: Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

D6640-01(2015): Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

D6784-16: Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)

D6868-17: Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities

D6911-15: Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis

D6966-13: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

D7012-14e1: Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

D7201-06(2011): Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)

D7263-09: Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

D7365-09a(2015): Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide

D7459-08(2016): Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources

D7663-12: Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

D7706-17: Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers

D7758-17: Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

D7859-13e1: Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers

E1645-16: Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

E1728-16: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

E1908-16: Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

E1943-98(2015): Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites

E2020-16: Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at Contaminated Sites

E2081-00(2015): Standard Guide for Risk-Based Corrective Action

E2681-13: Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum

E2733-10(2015): Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems

E2876-13: Standard Guide for Integrating Sustainable Objectives into Cleanup

E776-16: Standard Test Method for Determination of Forms of Chlorine in Refuse-Derived Fuel

F1523-94(2013): Standard Guide for Selection of Booms in Accordance With Water Body Classifications

F2304-10(2016)e1: Standard Practice for Sealing of Sewers Using Chemical Grouting

F2683-11(2017): Standard Guide for Selection of Booms for Oil-Spill Response

F715-07(2012): Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage

G131-96(2016)e1: Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques

G136-03(2016)e1: Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction

G141-09(2013): Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials

G144-01(2014): Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer

G165-99(2017): Standard Practice for Determining Rail-to-Earth Resistance

G172-02(2010)e1: Standard Guide for Statistical Analysis of Accelerated Service Life Data

G51-95(2012): Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing

G78-15: Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments

G97-97(2013): Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications

C1220-10: Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste

C1402-17: Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples

C1752-17: Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges

C593-06(2011): Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

D1066-11: Standard Practice for Sampling Steam

D1126-12: Standard Test Method for Hardness in Water

D1246-16: Standard Test Method for Bromide Ion in Water

D1292-15: Standard Test Method for Odor in Water 

D1426-15: Standard Test Methods for Ammonia Nitrogen In Water

D1498-14: Standard Test Method for Oxidation-Reduction Potential of Water

D1687-17: Standard Test Methods for Chromium in Water

D1688-17: Standard Test Methods for Copper in Water

D1739-98(2017): Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)

D1976-12: Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy

D2035-13: Standard Practice for Coagulation-Flocculation Jar Test of Water

D2187-17: Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins

D2332-13: Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence

D2580-06(2012): Standard Test Method for Phenols in Water by Gas-Liquid Chromatography

D2777-13: Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water

D2913-14: Standard Test Method for Mercaptan Content of the Atmosphere

D3154-14: Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)

D3162-12: Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)

D3325-90(2013): Standard Practice for Preservation of Waterborne Oil Samples

D3415-98(2011): Standard Practice for Identificaiton of Waterborne Oils

D3557-17: Standard Test Methods for Cadmium in Water

D3559-15: Standard Test Methods for Lead in Water

D3590-17: Standard Test Methods for Total Kjeldahl Nitrogen in Water

D3675-17: Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

D3686-13: Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)

D3687-07(2012): Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method

D3695-95(2013): Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography

D3796-09(2016): Standard Practice for Calibration of Type S Pitot Tubes

D3867-16: Standard Test Methods for Nitrite-Nitrate in Water

D3875-15: Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines

D3974-09(2015): Standard Practices for Extraction of Trace Elements from Sediments

D3978-04(2012): Standard Practice for Algal Growth Potential Testing with Pseudokirchneriella subcapitata

D3987-12: Standard Practice for Shake Extraction of Solid Waste with Water

D4043-17: Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

D4050-14: Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems

D4193-08(2013)e1: Standard Test Method for Thiocyanate in Water

D4221-17: Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

D4282-15: Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion

D4373-14: Standard Test Method for Rapid Determination of Carbonate Content of Soils

D4380-12: Standard Test Method for Density of Bentonitic Slurries

D4381/D4381M-12: Standard Test Method for Sand Content by Volume of Bentonitic Slurries

D4489-95(2011): Standard Practices for Sampling of Waterborne Oils

D4516-00(2010): Standard Practice for Standardizing Reverse Osmosis Performance Data

D4517-15: Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy

D4535-13e1: Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer

D4547-15: Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds

D4554-12: Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

D4611-16: Standard Test Method for Specific Heat of Rock and Soil

D4612-16: Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil

D4633-16: Standard Test Method for Energy Measurement for Dynamic Penetrometers

D4644-16: Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks

D4658-15: Standard Test Method for Sulfide Ion in Water

D4861-11: Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air

D4979-12: Standard Test Method for Physical Description Screening Analysis in Waste

D4992-14e1: Standard Practice for Evaluation of Rock to be Used for Erosion Control

D5011-17: Standard Practices for Calibration of Ozone Monitors Using Transfer Standards

D5057-17: Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste

D5058-12: Standard Practices for Compatibility of Screening Analysis of Waste

D5096-02(2017): Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer

D511-14: Standard Test Methods for Calcium and Magnesium In Water

D513-16: Standard Test Methods for Total and Dissolved Carbon Dioxide in Water

D5157-97(2014): Standard Guide for Statistical Evaluation of Indoor Air Quality Models

D5173-15: Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide

D5176-08(2015): Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection

D5231-92(2016): Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste

D5232-13: Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material

D5242-92(2013): Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs

D5334-14: Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

D5464-16: Standard Test Method for pH Measurement of Water of Low Conductivity

D5466-15: Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology)

D5495-03(2016): Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)

D5511-12: Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

D5526-12: Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

D5540-13: Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis

D5607-16: Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

D5609-16: Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling

D5610-94(2014): Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling

D5611-94(2016): Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application

D5739-06(2013): Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry

D5743-97(2013): Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers

D5753-05(2010): Standard Guide for Planning and Conducting Borehole Geophysical Logging

D5759-12: Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

D5784/D5784M-13: Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

D5830-14: Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography

D5847-02(2012): Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis

D5873-14: Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method

D5921-96(2010): Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems

D5988-12: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil

D6001-05(2012): Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization

D6044-96(2015): Standard Guide for Representative Sampling for Management of Waste and Contaminated Media

D6071-14: Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy

D6081-98(2014): Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

D6091-07(2014): Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error

D6092-14: Standard Practice for Specifying Standard Sizes of Stone for Erosion Control

D6170-17: Standard Guide for Selecting a Groundwater Modeling Code

D6232-16: Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities

D6235-04(2010): Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites

D6250-98(2009): Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions

D6270-08(2012): Standard Practice for Use of Scrap Tires in Civil Engineering Applications

D6286-12: Standard Guide for Selection of Drilling Methods for Environmental Site Characterization

D6432-11: Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

D6449-99(2015): Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

D6473-15: Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control

D6501-15: Standard Test Method for Phosphonate in Brines

D6508-15: Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte

D6517-00(2012)e1: Standard Guide for Field Preservation of Groundwater Samples

D6539-13: Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air

D6635-15: Standard Test Method for Performing the Flat Plate Dilatometer

D6661-10: Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling

D6691-09: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum

D6699-16: Standard Practice for Sampling Liquids Using Bailers

D6700-01(2013): Standard Practice for Use of Scrap Tire-Derived Fuel

D6726-15: Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction

D6830-02(2016): Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

D6888-16: Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

D6954-04(2013): Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

D7048-16: Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

D7065-11: Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert -Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry

D7066-04(2017): Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

D7143-17: Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products

D7144-05a(2016): Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination

D7237-15a: Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

D7283-17: Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting

D7297-14: Standard Practice for Evaluating Residential Indoor Air Quality Concerns

D7352-07(2012): Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)

D7363-13a: Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode

D7391-17e1: Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy

D7510-10(2016)e1: Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water

D7521-16: Standard Test Method for Determination of Asbestos in Soil

D7535-09(2015): Standard Test Method for Lead-210 in Water

D7574-16: Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry

D7575-11: Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination

D7648-12: Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment

D7677-16: Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water

D7678-17: Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy

D7731-11e1: Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

D854-14: Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

D859-16: Standard Test Method for Silica in Water

E104-02(2012): Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions

E1109-86(2009): Standard Test Method for Determining the Bulk Density of Solid Waste Fractions

E1193-97(2012): Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests

E1218-04(2012): Standard Guide for Conducting Static Toxicity Tests with Microalgae

E1368-14: Standard Practice for Visual Inspection of Asbestos Abatement Projects

E1391-03(2014): Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates

E1497-17: Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids

E1563-98(2012): Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos

E1733-95(2014): Standard Guide for Use of Lighting in Laboratory Testing

E1792-03(2016): Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

E1990-16: Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations

E2122-02(2013): Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves

E2173-16: Standard Guide for Disclosure of Environmental Liabilities

E2348-17: Standard Guide for Framework for a Consensus-based Environmental Decision-making Process

E2365-14: Standard Guide for Environmental Compliance Performance Assessment

E2435-05(2015): Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties

E2455-06(2013): Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels

E2531-06(2014): Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface

E2616-09(2014): Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations

E2690-17a: Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics

E2694-16: Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

E2718-16: Standard Guide for Financial Disclosures Attributed to Climate Change

E2790-11: Standard Guide for Identifying and Complying With Continuing Obligations

E2797-15: Standard Practice for Building Energy Performance Assessment for a Building Involved in a Real Estate Transaction

E477-13e1: Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

E729-96(2014): Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians

E775-15: Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel

E777-17: Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel

E778-15: Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples

F1093-99(2012): Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom

F1127-07(2013): Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel

F1322-15: Standard Guide for Selection of Shipboard Incinerators

F1323-14: Standard Specification for Shipboard Incinerators

F1607-95(2013): Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps

F1778-97(2016): Standard Guide for Selection of Skimmers for Oil-Spill Response

F2059-17: Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Swirling Flask

F2454-05(2016)e1: Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting

F2551-09(2016): Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes

F2617-15: Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

F2853-10(2015): Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams

F2931-17: Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products

F2980-13: Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)

F312-08(2016): Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters

F726-12: Standard Test Method for Sorbent Performance of Adsorbents

G101-04(2015): Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

G162-99(2010): Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils

G166-00(2011): Standard Guide for Statistical Analysis of Service Life Data

G50-10(2015): Standard Practice for Conducting Atmospheric Corrosion Tests on Metals