Popular Energy & Utilities Standards

Search within Energy & Utilities


D790-17: Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

A193/A193M-17: Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

D149-09(2013): Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

D4285-83(2012): Standard Test Method for Indicating Oil or Water in Compressed Air

F2249-03(2015): Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment

F855-17: Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment

D4228-05(2017): Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

D7843-16: Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

A105/A105M-14: Standard Specification for Carbon Steel Forgings for Piping Applications

A351/A351M-16: Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

D1000-17: Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications

A275/A275M-15: Standard Practice for Magnetic Particle Examination of Steel Forgings

A350/A350M-17: Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

D1533-12: Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

D4059-00(2010): Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

D5865-13: Standard Test Method for Gross Calorific Value of Coal and Coke

D6522-11: Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers

D923-15: Standard Practices for Sampling Electrical Insulating Liquids

E903-12: Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres

A516/A516M-17: Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

D3172-13: Standard Practice for Proximate Analysis of Coal and Coke

D3175-17: Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke

D3612-02(2017): Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

A20/A20M-18: Standard Specification for General Requirements for Steel Plates for Pressure Vessels

B193-16: Standard Test Method for Resistivity of Electrical Conductor Materials

B258-14: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors

D3174-12: Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal

D3487-16e1: Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus

D3874-13: Standard Test Method for Ignition of Materials by Hot Wire Sources

D4378-13: Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

D785-08(2015): Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

D877/D877M-13: Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

D971-12: Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method

A217/A217M-14: Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

A336/A336M-18: Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

A352/A352M-17: Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

A470/A470M-05(2015): Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

B3-13: Standard Specification for Soft or Annealed Copper Wire

B33-10(2014): Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes

B800-05(2015): Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers

B801-18: Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

B910/B910M-07(2013): Standard Specification for Annealed Copper-Clad Steel Wire

C1463-13: Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis

D1524-15: Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field

D1816-12: Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes

D202-17: Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation

D2668-07(2013): Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption

D3176-15: Standard Practice for Ultimate Analysis of Coal and Coke

D3180-15: Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases

D3251-04(2013): Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

D3483-14: Standard Test Methods for Accumulated Deposition in a Steam Generator Tube

D3638-12: Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials

D388-18: Standard Classification of Coals by Rank

D3911-16: Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

D4082-10(2017): Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants

D4538-15: Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities

D4935-10: Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials

D5016-16: Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption

D5213-12: Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications

D5367-16: Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

D5374-13: Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

D6172-98(2010): Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures

D6272-17: Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

D7150-13: Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress

D7151-15: Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7459-08(2016): Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources

D7830/D7830M-14: Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge

D7978-14: Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method

D924-15: Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

D952-15: Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

E1606-15: Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes

E1758-01(2015): Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography

E2766-13: Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs

E2848-13: Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance

E3066-16a: Standard Practice for Evaluating Relative Sustainability Involving Energy or Chemicals from Biomass

A1082/A1082M-16: Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

A178/A178M-02(2012): Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

A179/A179M-90a(2012): Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

A192/A192M-17: Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

A209/A209M-03(2017): Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

A210/A210M-02(2012): Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

A214/A214M-96(2012): Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

A290/A290M-16: Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

A343/A343M-14: Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

A420/A420M-16: Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

A471/A471M-09(2014): Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

A515/A515M-17: Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

A517/A517M-17: Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

A596/A596M-14: Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens

A612/A612M-12: Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

A662/A662M-17: Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

A688/A688M-15: Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

A719/A719M-14: Standard Test Method for Lamination Factor of Magnetic Materials

A990/A990M-14a: Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service

A995/A995M-18: Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

B105-05(2012): Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

B232/B232M-17: Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

B246-15: Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes

B263/B263M-14: Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors

B286-07(2017): Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

B359/B359M-15: Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

B416-98(2013): Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors

B470-02(2017): Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment

B566-04a(2016): Standard Specification for Copper-Clad Aluminum Wire

B8-11(2017): Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

B941-16: Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes

C1000-11: Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry

C1220-17: Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste

C1233-15: Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials

C1254-13: Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence

C1267-17: Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium

C1270-97(2012): Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors

C1284-10: Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry

C1287-18: Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry

C1380-04(2011): Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry

C1402-17: Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples

C1473-11: Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry

C1662-17: Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method

C1752-17: Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges

C1784-14: Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

C1817-16: Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O2) Pellets by Gravimetry

C1844-16: Standard Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution

C753-16a: Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder

C761-18: Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride

C781-08(2014): Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components

C787-15: Standard Specification for Uranium Hexafluoride for Enrichment

C791-12: Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide

C852/C852M-17: Standard Guide for Design Criteria for Plutonium Gloveboxes

C859-14b: Standard Terminology Relating to Nuclear Materials

D115-17: Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation

D1169-11: Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids

D1275-15: Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids

D1675-03(2011): Standard Test Methods for Polytetrafluoroethylene Tubing

D1676-17: Standard Test Methods for Film-Insulated Magnet Wire

D1868-13: Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems

D1933-03(2017): Standard Specification for Nitrogen Gas as an Electrical Insulating Material

D197-87(2012): Standard Test Method for Sampling and Fineness Test of Pulverized Coal

D2013/D2013M-12: Standard Practice for Preparing Coal Samples for Analysis

D2112-15: Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel

D2234/D2234M-17: Standard Practice for Collection of a Gross Sample of Coal

D2275-14: Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface

D2303-13: Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials

D2305-10: Standard Test Methods for Polymeric Films Used for Electrical Insulation

D2633-13a: Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

D2655-17: Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V

D3380-14: Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates

D3402/D3402M-16: Standard Test Method for Tumbler Test for Coke

D348-13: Standard Test Methods for Rigid Tubes Used for Electrical Insulation

D350-13: Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation

D3850-12: Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)

D4243-16: Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards

D4286-08(2015): Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities

D4537-12: Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities

D4559-99(2010): Standard Test Method for Volatile Matter in Silicone Fluid

D4749-87(2012): Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size

D5144-08(2016): Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants

D5470-17: Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials

D5987-96(2015): Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods

D6224-16: Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

D6316-17: Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke

D6542-05(2010): Standard Practice for Tonnage Calculation of Coal in a Stockpile

D6871-17: Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus

D69-12: Standard Test Methods for Friction Tapes

D7108-12: Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist

D7348-13: Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

D7582-15: Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis

D7602-11(2017): Standard Practice for Installation of Vulcanized Rubber Linings

D7650-13: Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter

D7651-17: Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel

D7652-11: Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection

D7759/D7759M-14: Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration

D7800/D7800M-14: Standard Test Method for Determination of Elemental Sulfur in Natural Gas

D876-13: Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

D922-11: Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing

E1036-15: Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells

E1038-10(2015): Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls

E1175-87(2015): Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere

E1690-08(2016): Standard Test Method for Determination of Ethanol Extractives in Biomass

E1721-01(2015): Standard Test Method for Determination of Acid-Insoluble Residue in Biomass

E1756-08(2015): Standard Test Method for Determination of Total Solids in Biomass

E1802-12: Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules

E1821-08(2015): Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography

E2096/E2096M-16: Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

E3044/E3044M-16e1: Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints

E666-14: Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation

E690-15: Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes

E722-14: Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics

E822-92(2015): Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls

E870-82(2013): Standard Test Methods for Analysis of Wood Fuels

E871-82(2013): Standard Test Method for Moisture Analysis of Particulate Wood Fuels

E872-82(2013): Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels

E971-11: Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation