Popular Chemicals Standards

Search within Chemicals


D412-16: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

D638-14: Standard Test Method for Tensile Properties of Plastics

D3359-17: Standard Test Methods for Rating Adhesion by Tape Test

D790-17: Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D2240-15: Standard Test Method for Rubber Property—Durometer Hardness

D695-15: Standard Test Method for Compressive Properties of Rigid Plastics

D3574-17: Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

D4541-17: Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

C109/C109M-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

D3276-15e1: Standard Guide for Painting Inspectors (Metal Substrates)

D792-13: Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

E1300-16: Standard Practice for Determining Load Resistance of Glass in Buildings

D2321-14e1: Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

D543-14: Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

D7091-13: Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

D882-12: Standard Test Method for Tensile Properties of Thin Plastic Sheeting

D471-16a: Standard Test Method for Rubber Property—Effect of Liquids

C150/C150M-17: Standard Specification for Portland Cement

D1209-05(2011): Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

D1238-13: Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

D1894-14: Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

D3039/D3039M-14: Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

D4756-15: Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

D1654-08(2016)e1: Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

D7234-12: Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

F1417-11a(2015): Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

D1002-10: Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

D1876-08(2015)e1: Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

D2196-15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer

D256-10e1: Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

D3418-15: Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

D4752-10(2015): Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

D610-08(2012): Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

D618-13: Standard Practice for Conditioning Plastics for Testing

D6677-07(2012): Standard Test Method for Evaluating Adhesion by Knife

C1036-16: Standard Specification for Flat Glass

C1048-12e1: Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass

C1583/C1583M-13: Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

D3363-05(2011)e2: Standard Test Method for Film Hardness by Pencil Test

D395-16e1: Standard Test Methods for Rubber Property—Compression Set

D648-16: Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

E1064-16: Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration

E203-16: Standard Test Method for Water Using Volumetric Karl Fischer Titration

F1216-16: Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

D1003-13: Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

D1621-16: Standard Test Method for Compressive Properties of Rigid Cellular Plastics

D2000-12(2017): Standard Classification System for Rubber Products in Automotive Applications

D2578-09: Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

D4060-14: Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

D5386-16: Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

D5402-15: Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

D624-00(2012): Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

D903-98(2010): Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

D1308-02(2013): Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes

D3575-14: Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

D4417-14: Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

D5162-15: Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

D7393-16: Standard Practice for Indicating Oil in Abrasives

C1376-15: Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass

C25-11e2: Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

D2247-15: Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity

D2565-16: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

D3350-14: Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

D4228-05(2017): Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

D4236-94(2016): Standard Practice for Labeling Art Materials for Chronic Health Hazards

D4329-13: Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

D635-14: Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

D6778-14: Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

D6779-17: Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

E70-07(2015): Standard Test Method for pH of Aqueous Solutions With the Glass Electrode

C114-15: Standard Test Methods for Chemical Analysis of Hydraulic Cement

C1161-13: Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

C133-97(2015): Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories

C1521-13: Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

C881/C881M-15: Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

D1084-16: Standard Test Methods for Viscosity of Adhesives

D1613-17: Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

D1709-16ae1: Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

D1922-15: Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

D2122-16: Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

D2344/D2344M-16: Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

D2369-10(2015)e1: Standard Test Method for Volatile Content of Coatings

D2583-13a: Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

D2765-16: Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

D3212-07(2013): Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

D3492-16: Standard Specification for Rubber Contraceptives (Male Condoms)

D4940-15e1: Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives

F2026-16: Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

F2389-17a: Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

F2620-13: Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings

F619-14: Standard Practice for Extraction of Medical Plastics

G127-15: Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems

C1193-16: Standard Guide for Use of Joint Sealants

C579-01(2012): Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

D1149-16: Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment

D1384-05(2012): Standard Test Method for Corrosion Test for Engine Coolants in Glassware

D1533-12: Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

D16-16: Standard Terminology for Paint, Related Coatings, Materials, and Applications

D1708-13: Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

D1921-12: Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

D1929-16: Standard Test Method for Determining Ignition Temperature of Plastics

D2513-16a: Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

D2794-93(2010): Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

D297-15: Standard Test Methods for Rubber Products—Chemical Analysis

D2992-12: Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

D4059-00(2010): Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

D4587-11: Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

D5363-16: Standard Specification for Anaerobic Single-Component Adhesives (AN)

D570-98(2010)e1: Standard Test Method for Water Absorption of Plastics

D573-04(2015): Standard Test Method for Rubber—Deterioration in an Air Oven

D714-02(2009): Standard Test Method for Evaluating Degree of Blistering of Paints

D7869-17: Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

E1479-16: Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers

F1185-03(2014): Standard Specification for Composition of Hydroxylapatite for Surgical Implants

F1700-13a: Standard Specification for Solid Vinyl Floor Tile

F1743-17: Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

F696-06(2011): Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens

F739-12e1: Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact

C158-02(2017): Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

C267-01(2012): Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

C273/C273M-16: Standard Test Method for Shear Properties of Sandwich Core Materials

C297/C297M-16: Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

C704/C704M-15: Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

C738-94(2016): Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces

C794-15a: Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

C882/C882M-13a: Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

C920-14a: Standard Specification for Elastomeric Joint Sealants

D1204-14: Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

D1248-16: Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

D1475-13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

D1603-14: Standard Test Method for Carbon Black Content in Olefin Plastics

D1722-09: Standard Test Method for Water Miscibility of Water-Soluble Solvents

D1784-11: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D1785-15: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

D1881-97(2009): Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware

D2412-11: Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

D2572-97(2010): Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers

D2842-12: Standard Test Method for Water Absorption of Rigid Cellular Plastics

D2979-16: Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine

D3528-96(2016): Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading

D3612-02(2009): Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

D3676-13: Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

D3835-16: Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

D3935-15: Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material

D4000-16: Standard Classification System for Specifying Plastic Materials

D4101-14e2: Standard Specification for Polypropylene Injection and Extrusion Materials

D4214-07(2015): Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films

D4459-12: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

D5205-16: Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials

D522/D522M-17: Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

D5379/D5379M-12: Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

D6210-10: Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines

D6245-12: Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

D6290-13: Standard Test Method for Color Determination of Plastic Pellets

D6641/D6641M-16e1: Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

D6862-11(2016): Standard Test Method for 90 Degree Peel Resistance of Adhesives

D6978-05(2013): Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs

D7136/D7136M-15: Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

D870-15: Standard Practice for Testing Water Resistance of Coatings Using Water Immersion

D968-17: Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

E1508-12a: Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

E2680-16: Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)

E300-03(2017): Standard Practice for Sampling Industrial Chemicals

E50-17: Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

F451-16: Standard Specification for Acrylic Bone Cement

C113-14: Standard Test Method for Reheat Change of Refractory Brick

C207-06(2011): Standard Specification for Hydrated Lime for Masonry Purposes

C307-03(2012): Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

C695-15: Standard Test Method for Compressive Strength of Carbon and Graphite

C977-10: Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

D1056-14: Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

D1078-11: Standard Test Method for Distillation Range of Volatile Organic Liquids

D1121-11: Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts

D1177-17: Standard Test Method for Freezing Point of Aqueous Engine Coolants

D1200-10(2014): Standard Test Method for Viscosity by Ford Viscosity Cup

D1414-15: Standard Test Methods for Rubber O-Rings

D1544-04(2010): Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)

D1653-13: Standard Test Methods for Water Vapor Transmission of Organic Coating Films

D1693-15: Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

D1849-95(2014)e1: Standard Test Method for Package Stability of Paint

D1895-17: Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

D2047-11: Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

D2486-17: Standard Test Methods for Scrub Resistance of Wall Paints

D2559-12ae1: Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

D2562-94(2015): Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics

D2574-16: Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms

D2584-11: Standard Test Method for Ignition Loss of Cured Reinforced Resins

D2774-12: Standard Practice for Underground Installation of Thermoplastic Pressure Piping

D281-12(2016): Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out

D2843-16: Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

D2863-17: Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

D2990-17: Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

D2996-17: Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D3163-01(2014): Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading

D3167-10: Standard Test Method for Floating Roller Peel Resistance of Adhesives

D3306-14: Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service

D3531/D3531M-16: Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg

D380-94(2012): Standard Test Methods for Rubber Hose

D4058-96(2015): Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

D4145-10: Standard Test Method for Coating Flexibility of Prepainted Sheet

D4171-16a: Standard Specification for Fuel System Icing Inhibitors

D4212-16: Standard Test Method for Viscosity by Dip-Type Viscosity Cups

D4218-15: Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

D4397-16: Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

D4414-95(2013): Standard Practice for Measurement of Wet Film Thickness by Notch Gages

D4585/D4585M-13: Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

D4703-16: Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

D4762-16: Standard Guide for Testing Polymer Matrix Composite Materials

D4787-13: Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

D4828-94(2016): Standard Test Methods for Practical Washability of Organic Coatings

D4895-16: Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

D5045-14: Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

D5116-10: Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products

D5420-16: Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

D5628-10: Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

D5630-13: Standard Test Method for Ash Content in Plastics

D5894-16: Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

D6124-06(2017): Standard Test Method for Residual Powder on Medical Gloves

D632-12: Standard Specification for Sodium Chloride

D6394-14: Standard Specification for Sulfone Plastics (SP)

D6602-13: Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

D6944-15: Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling

D6980-17: Standard Test Method for Determination of Moisture in Plastics by Loss in Weight

D7332/D7332M-16: Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

D7661-10: Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms

D785-08(2015): Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

D823-95(2012)e1: Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

D883-17: Standard Terminology Relating to Plastics

D891-09: Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals

E1053-11: Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces

E1601-12: Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

E1899-16: Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide

E200-16: Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis

E222-17: Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation

E2649-12: Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

E659-15: Standard Test Method for Autoignition Temperature of Chemicals

F1498-08(2012)e1: Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings

F1697-09(2015): Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

F1807-17: Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

F1962-11: Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings

F2160-16: Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

F2214-16: Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)

F2897-15a: Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)

F714-13: Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

F732-17: Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

G122-96(2015)e1: Standard Test Method for Evaluating the Effectiveness of Cleaning Agents

C1147-14: Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics

C1157/C1157M-17: Standard Performance Specification for Hydraulic Cement

C1166-06(2016): Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

C1172-14: Standard Specification for Laminated Architectural Flat Glass

C1239-13: Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics

C1401-14: Standard Guide for Structural Sealant Glazing

C147-86(2015): Standard Test Methods for Internal Pressure Strength of Glass Containers

C149-14: Standard Test Method for Thermal Shock Resistance of Glass Containers

C1499-15: Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature

C162-05(2015): Standard Terminology of Glass and Glass Products

C181-11: Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics

C20-00(2015): Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water

C201-93(2013): Standard Test Method for Thermal Conductivity of Refractories

C210-95(2014): Standard Test Method for Reheat Change of Insulating Firebrick

C225-85(2014): Standard Test Methods for Resistance of Glass Containers to Chemical Attack

C272/C272M-16: Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions

C393/C393M-16: Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

C465-16: Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

C542-05(2017): Standard Specification for Lock-Strip Gaskets

C559-16: Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

C561-16: Standard Test Method for Ash in a Graphite Sample

C580-02(2012): Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C581-15: Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

C748-98(2015): Standard Test Method for Rockwell Hardness of Graphite Materials

C886-98(2015): Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

C979/C979M-16: Standard Specification for Pigments for Integrally Colored Concrete

C989/C989M-17: Standard Specification for Slag Cement for Use in Concrete and Mortars

D1004-13: Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

D1005-95(2013): Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers

D1044-13: Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

D1173-07(2015): Standard Test Method for Foaming Properties of Surface-Active Agents

D1183-03(2011): Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions

D1210-05(2014): Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage

D1214-10(2015)e1: Standard Test Method for Sieve Analysis of Glass Spheres

D1287-11: Standard Test Method for pH of Engine Coolants and Antirusts

D1296-01(2012): Standard Test Method for Odor of Volatile Solvents and Diluents

D1329-16: Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)

D1349-14: Standard Practice for Rubber—Standard Conditions for Testing

D1353-13: Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

D1363-06(2011): Standard Test Method for Permanganate Time of Acetone and Methanol

D1386-15: Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes

D1401-12e1: Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

D1415-06(2012): Standard Test Method for Rubber Property—International Hardness

D1505-10: Standard Test Method for Density of Plastics by the Density-Gradient Technique

D1525-17e1: Standard Test Method for Vicat Softening Temperature of Plastics

D1598-15a: Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

D1599-14e1: Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

D1623-17: Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

D1630-16: Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)

D1710-15: Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

D1734-93(2013): Standard Practice for Making Cementitious Panels for Testing Coatings

D1735-14: Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

D1746-15: Standard Test Method for Transparency of Plastic Sheeting

D1751-04(2013)e1: Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

D1790-14: Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

D1938-14: Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

D1998-15: Standard Specification for Polyethylene Upright Storage Tanks

D2022-89(2016): Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches

D2024-09(2017): Standard Test Method for Cloud Point of Nonionic Surfactants

D2074-07(2013): Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method

D2091-96(2017): Standard Test Method for Print Resistance of Lacquers

D2103-15: Standard Specification for Polyethylene Film and Sheeting

D2116-16: Standard Specification for FEP Resin Molding and Extrusion Materials

D2121-16: Standard Test Methods for Polymer Content of Styrene Monomer

D2124-99(2011): Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique

D2197-16: Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion

D2239-12a: Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

D2248-01a(2013): Standard Practice for Detergent Resistance of Organic Finishes

D2290-16: Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

D2337-01(2014): Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers

D2343-09: Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

D2457-13: Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

D2463-15: Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

D2466-17: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

D2538-02(2010): Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

D2563-08(2015): Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts

D2665-14: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

D2732-14: Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting

D2734-16: Standard Test Methods for Void Content of Reinforced Plastics

D2837-13e1: Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

D2846/D2846M-17a: Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

D2855-15: Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets

D2942-02(2013): Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)

D3123-09(2017): Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

D3165-07(2014): Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies

D3171-15: Standard Test Methods for Constituent Content of Composite Materials

D3251-04(2013): Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

D3274-09(2013): Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

D3278-96(2011): Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

D329-07(2013): Standard Specification for Acetone

D333-01(2013): Standard Guide for Clear and Pigmented Lacquers

D3354-15: Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method

D3389-16: Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

D3545-06(2012): Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography

D3763-15: Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

D3801-10: Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

D3838-05(2017): Standard Test Method for pH of Activated Carbon

D3846-08(2015): Standard Test Method for In-Plane Shear Strength of Reinforced Plastics

D3892-15: Standard Practice for Packaging/Packing of Plastics

D3895-14: Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

D3911-16: Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

D3924-16: Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials

D4009-92(2011): Standard Guide for Foam Stability of Hand Dishwashing Detergents

D4066-13: Standard Classification System for Nylon Injection and Extrusion Materials (PA)

D4067-16: Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

D4068-17: Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

D4082-10(2017): Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants

D4097-01(2010): Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

D4274-16: Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

D4303-10(2016): Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials

D4434/D4434M-15: Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

D4475-02(2016): Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

D4483-14a: Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

D4591-07(2012): Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

D4603-03(2011)e1: Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

D4607-14: Standard Test Method for Determination of Iodine Number of Activated Carbon

D4672-12: Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

D4726-15: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

D4803-10: Standard Test Method for Predicting Heat Buildup in PVC Building Products

D4819-13: Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

D4838-88(2016): Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints

D4894-15: Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

D4913-00(2016): Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors

D4976-12a: Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

D5025-12e1: Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

D5026-15: Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension

D5135-16e1: Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography

D5151-06(2015): Standard Test Method for Detection of Holes in Medical Gloves

D5155-14e1: Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates

D5178-16: Standard Test Method for Mar Resistance of Organic Coatings

D5197-16: Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)

D5211-17: Standard Specification for Xylenes for p-Xylene Feedstock

D5229/D5229M-14: Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials

D5296-11: Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

D5343-06(2012)e1: Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners

D5367-16: Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

D5528-13: Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

D575-91(2012): Standard Test Methods for Rubber Properties in Compression

D5806-95(2017): Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration

D5813-04(2012): Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

D5868-01(2014): Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding

D5927-17: Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

D5947-11: Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

D5961/D5961M-17: Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

D609-17: Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

D6166-12(2016): Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)

D6173-97(2014): Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration

D6195-03(2011): Standard Test Methods for Loop Tack

D6196-15: Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air

D6226-15: Standard Test Method for Open Cell Content of Rigid Cellular Plastics

D6262-12: Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

D6272-17: Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

D6280-98(2014): Standard Specification for Zinc Phosphate Pigments

D6284-17: Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine

D6319-10(2015): Standard Specification for Nitrile Examination Gloves for Medical Application

D6386-16a: Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

D6563-12: Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography

D661-93(2011): Standard Test Method for Evaluating Degree of Cracking of Exterior Paints

D6690-15: Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

D6843-10(2015): Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)

D6844-10(2015): Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)

D6868-17: Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities

D6886-14e1: Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography

D6966-13: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

D7028-07(2015): Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)

D7078/D7078M-12: Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

D7088-17: Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

D7089-06(2014): Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing

D709-17: Standard Specification for Laminated Thermosetting Materials

D7151-15: Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7160-16: Standard Practice for Determination of Expiration Dating for Medical Gloves

D7180/D7180M-05(2013)e1: Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects

D7201-06(2011): Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)

D7205/D7205M-06(2016): Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars

D7225-13: Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors

D7336/D7336M-16: Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials

D7426-08(2013): Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

D746-14: Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

D7565/D7565M-10(2017): Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures

D7583-16: Standard Test Method for John Deere Coolant Cavitation Test

D7706-17: Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers

D7774-17: Standard Test Method for Flexural Fatigue Properties of Plastics

D7836-13: Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials

D7859-13e1: Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers

D869-85(2015): Standard Test Method for Evaluating Degree of Settling of Paint

D885/D885M-10A(2014)e1: Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers

D905-08(2013): Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

D928-03(2017): Standard Specification for Sodium Bicarbonate

D952-15: Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

E1157-87(2011): Standard Specification for Sampling and Testing of Reusable Laboratory Glassware

E1251-17a: Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

E1329-10: Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis

E1426-14: Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques

E1621-13: Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry

E1645-16: Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

E1655-05(2012): Standard Practices for Infrared Multivariate Quantitative Analysis

E1728-16: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

E1908-16: Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

E202-12: Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols

E224-16: Standard Test Methods for Analysis of Hydrochloric Acid

E2679-09(2016)e1: Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol byNon-Aqueous Potentiometric Titration

E298-17a: Standard Test Methods for Assay of Organic Peroxides

E299-17a: Standard Test Method for Trace Amounts of Peroxides In Organic Solvents

E305-13: Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves

E537-12: Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry

E582-07(2013)e1: Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures

F1041-02(2016): Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing

F1044-05(2011)e1: Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

F1055-16a: Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing

F1088-04a(2010): Standard Specification for Beta-Tricalcium Phosphate for Surgical Implantation

F1236-16: Standard Guide for Visual Inspection of Electrical Protective Rubber Products

F1290-98a(2011): Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings

F1635-16: Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

F1741-08(2016): Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

F2019-11: Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)

F2179-14: Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers

F218-13: Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass

F2250-13: Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials

F2256-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading

F2579-10: Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants

F2786-16: Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)

F2831-12: Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

F2848-17: Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns

F2977-13: Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants

F481-97(2014): Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

F483-09(2014): Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

F484-08(2013): Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds

F502-08(2013): Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces

F645-15a: Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

F668-17: Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric

F679-16: Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

F877-11a: Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems

F949-15: Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

G120-15: Standard Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction

G121-98(2015)e1: Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents

B827-05(2014): Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

C1021-08(2014): Standard Practice for Laboratories Engaged in Testing of Building Sealants

C1069-09(2014): Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

C1070-01(2014): Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering

C110-16e1: Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C1211-13: Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures

C1259-15: Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration

C1260-14: Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

C1271-99(2012): Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

C1274-12: Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption

C1279-13: Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

C1293-08b(2015): Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

C1294-15: Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

C1301-95(2014): Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

C1323-16: Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature

C1329/C1329M-16a: Standard Specification for Mortar Cement

C1337-17: Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures

C134-95(2016): Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

C1341-13: Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

C1392-00(2014): Standard Guide for Evaluating Failure of Structural Sealant Glazing

C1394-03(2012): Standard Guide for In-Situ Structural Silicone Glazing Evaluation

C1407-98(2016): Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes

C1421-16: Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature

C1422/C1422M-15: Standard Specification for Chemically Strengthened Flat Glass

C1426-14: Standard Practices for Verification and Calibration of Polarimeters

C1438-13(2017): Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

C1439-13: Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

C1440-08(2013)e1: Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

C1442-14: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

C1464-16: Standard Specification for Bent Glass

C1466-00(2016): Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware

C1469-10(2015): Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

C148-17: Standard Test Methods for Polariscopic Examination of Glass Containers

C1503-08(2013): Standard Specification for Silvered Flat Glass Mirror

C1557-14: Standard Test Method for Tensile Strength and Young’s Modulus of Fibers

C1567-13: Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

C1582/C1582M-11(2017)e1: Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

C1600/C1600M-17: Standard Specification for Rapid Hardening Hydraulic Cement

C1624-05(2015): Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing

C1649-14: Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated

C1650-14: Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated

C1683-10(2015): Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics

C1702-17: Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

C186-15a: Standard Test Method for Heat of Hydration of Hydraulic Cement

C198-09(2013): Standard Test Method for Cold Bonding Strength of Refractory Mortar

C219-14a: Standard Terminology Relating to Hydraulic Cement

C224-78(2014): Standard Practice for Sampling Glass Containers

C226-12: Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

C348-14: Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

C363/C363M-16: Standard Test Method for Node Tensile Strength of Honeycomb Core Materials

C373-17: Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products

C403/C403M-16: Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

C413-01(2012): Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C451-13: Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

C471M-17e1: Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

C494/C494M-17: Standard Specification for Chemical Admixtures for Concrete

C50/C50M-13: Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

C515-13: Standard Specification for Chemical-Resistant Ceramic Tower Packings

C531-00(2012): Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C557-03(2017): Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

C563-17: Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement

C586-11: Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)

C593-06(2011): Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

C595/C595M-17: Standard Specification for Blended Hydraulic Cements

C611-98(2016): Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

C623-92(2015): Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance

C651-15: Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

C661-15: Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

C674-13: Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials

C675-91(2016): Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers

C679-15: Standard Test Method for Tack-Free Time of Elastomeric Sealants

C717-17: Standard Terminology of Building Seals and Sealants

C719-14: Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

C724-91(2015): Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass

C730-98(2013): Standard Test Method for Knoop Indentation Hardness of Glass

C735-04(2014): Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers

C747-16: Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

C769-15: Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus

C773-88(2016): Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials

C781-08(2014): Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components

C782-13: Standard Test Method for Softness of Preformed Tape Sealants

C796/C796M-12: Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

C837-09(2014): Standard Test Method for Methylene Blue Index of Clay

C865-13: Standard Practice for Firing Refractory Concrete Specimens

C884/C884M-16: Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

C907-17: Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

C908-15: Standard Test Method for Yield Strength of Preformed Tape Sealants

C919-12(2017): Standard Practice for Use of Sealants in Acoustical Applications

C927-80(2014): Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels

D1045-14: Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

D1062-08(2015): Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds

D1076-15: Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex

D1119-05(2015): Standard Test Method for Percent Ash Content of Engine Coolants

D1120-17: Standard Test Method for Boiling Point of Engine Coolants

D1122-16(2017)e1: Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer

D1144-99(2016): Standard Practice for Determining Strength Development of Adhesive Bonds

D1148-13: Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

D115-14: Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation

D1152-06(2012): Standard Specification for Methanol (Methyl Alcohol)

D1155-10(2015): Standard Test Method for Roundness of Glass Spheres

D1171-16e1: Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)

D1212-91(2013): Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

D1310-14: Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus

D1331-14: Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials

D1364-02(2012): Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

D1417-16: Standard Test Methods for Rubber Latices—Synthetic

D1435-13: Standard Practice for Outdoor Weathering of Plastics

D1439-15: Standard Test Methods for Sodium Carboxymethylcellulose

D1483-12(2016): Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method

D1494-12: Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

D1499-13: Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

D1514-15: Standard Test Method for Carbon Black—Sieve Residue

D153-84(2014): Standard Test Methods for Specific Gravity of Pigments

D1614-09: Standard Test Method for Alkalinity in Acetone

D1644-01(2017): Standard Test Methods for Nonvolatile Content of Varnishes

D1646-15: Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)

D1652-11e1: Standard Test Method for Epoxy Content of Epoxy Resins

D1667-17: Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)

D1675-03(2011): Standard Test Methods for Polytetrafluoroethylene Tubing

D1681-05(2014): Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure

D1686-10: Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)

D1726-11: Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins

D1755-15: Standard Specification for Poly(Vinyl Chloride) Resins

D1781-98(2012): Standard Test Method for Climbing Drum Peel for Adhesives

D1793-17: Standard Test Method for Water Spotting of Emulsion Floor Polishes

D1795-13: Standard Test Method for Intrinsic Viscosity of Cellulose

D185-07(2012): Standard Test Methods for Coarse Particles in Pigments

D1871-04(2014): Standard Test Method for Adhesion Between Tire Bead Wire and Rubber

D1875-03(2013): Standard Test Method for Density of Adhesives in Fluid Form

D1975-16: Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails

D2084-11(2016): Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter

D2093-03(2017): Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding

D2095-96(2015): Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

D2105-01(2014): Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

D2126-15: Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

D2137-11: Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics

D2152-13: Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

D2187-17: Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins

D2194-02(2012): Standard Test Method for Concentration of Formaldehyde Solutions

D2202-00(2014): Standard Test Method for Slump of Sealants

D2227-96(2015): Standard Specification for Natural Rubber (NR) Technical Grades

D2235-04(2016): Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

D2238-92(2012)e1: Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1

D2243-95(2014): Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

D2281-10(2016): Standard Test Method for Evaluation of Wetting Agents by the Skein Test

D2295-96(2016): Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)

D2340-13: Standard Test Method for Peroxides in Styrene Monomer

D2364-15: Standard Test Methods for Hydroxyethylcellulose

D2370-16: Standard Test Method for Tensile Properties of Organic Coatings

D2377-14: Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

D2414-16e1: Standard Test Method for Carbon Black—Oil Absorption Number (OAN)

D2444-99(2010): Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

D2454-14: Standard Practice for Determining the Effect of Overbaking on Organic Coatings

D2464-15: Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

D2556-14: Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry

D2561-17: Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

D2582-16: Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

D2609-15: Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

D2633-13a: Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

D2651-01(2016): Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding

D2655-12: Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V

D2657-07(2015): Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

D2659-16: Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers

D2661-14: Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

D2697-03(2014): Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings

D2739-97(2010): Standard Test Method for Volume Resistivity of Conductive Adhesives

D280-01(2012): Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments

D2805-11: Standard Test Method for Hiding Power of Paints by Reflectometry

D2827-13: Standard Specification for Styrene Monomer

D283-13: Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments

D2854-09(2014): Standard Test Method for Apparent Density of Activated Carbon

D2857-16: Standard Practice for Dilute Solution Viscosity of Polymers

D2866-11: Standard Test Method for Total Ash Content of Activated Carbon

D2867-17: Standard Test Methods for Moisture in Activated Carbon

D2919-01(2014): Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading

D2925-14: Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow

D3003-01(2016): Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates

D3034-16: Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

D3121-17: Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball

D3138-04(2016): Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components

D3153-17: Standard Test Method for Recoatability of Water-Emulsion Floor Polishes

D3159-15: Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials

D3164-03(2017): Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading

D3182-16: Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

D3183-10(2015): Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products

D3193-17: Standard Specification for Ethylbenzene

D3261-16: Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

D3265-17a: Standard Test Method for Carbon Black—Tint Strength

D3280-85(2014): Standard Test Methods for Analysis of White Zinc Pigments

D3294-15: Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes

D3299-10: Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

D3308-12(2017): Standard Specification for PTFE Resin Skived Tape

D3321-13: Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants

D3335-85a(2014): Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy

D3364-99(2011): Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

D3367-13: Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force

D3420-14: Standard Test Method for Pendulum Impact Resistance of Plastic Film

D3424-11: Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

D3465-14: Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography

D3517-14: Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

D3518/D3518M-13: Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate

D3576-15: Standard Test Method for Cell Size of Rigid Cellular Plastics

D3577-09(2015): Standard Specification for Rubber Surgical Gloves

D3578-05(2015): Standard Specification for Rubber Examination Gloves

D3579-77(2016): Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type

D3596-14: Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins

D3641-15: Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

D3642-13: Standard Test Method for Softening Point of Certain Alkali-Soluble Resins

D365-01(2017): Standard Guide for Soluble Nitrocellulose Base Solutions

D3675-17: Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

D3679-17: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

D3686-13: Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)

D3687-07(2012): Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method

D3735-07(2012): Standard Specification for VM&P Naphthas

D3753-12e1: Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

D3754-14: Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

D3767-03(2014): Standard Practice for Rubber—Measurement of Dimensions

D378-10(2016): Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type

D3792-16: Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph

D3841-16: Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

D3849-14a: Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy

D3897-17: Standard Practice for Calculation of Basicity of Chrome Tanning Liquors

D3898-93(2015): Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors

D3913-03(2015): Standard Test Method for Acidity in Basic Chromium Tanning Liquors

D3916-08(2016): Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

D3925-02(2015): Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings

D3941-14: Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus

D3965-16: Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

D4008-16: Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents

D4017-02(2015): Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method

D4018-17: Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows

D4040-10: Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer

D4103-17: Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing

D413-98(2013): Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate

D4179-11(2017): Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers

D4204-16: Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study

D4206-96(2013): Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus

D4209-07(2013): Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes

D4226-16: Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

D4284-12(2017)e1: Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry

D429-14: Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

D4339-01(2013): Standard Test Method for Determination of the Odor of Adhesives

D4349-16: Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

D4367-02(2012): Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography

D4396-15: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications

D4400-99(2012)e1: Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator

D4482-11: Test Method for Rubber Property - Extension Cycling Fatigue

D4526-12: Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography

D4551-12: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

D4559-99(2010): Standard Test Method for Volatile Matter in Silicone Fluid

D4590-13: Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry

D460-91(2014): Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products

D4637/D4637M-15: Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

D4642-04(2016): Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry

D465-15: Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products

D4669-07(2013)e1: Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

D4673-16: Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

D4711-89(2017): Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids

D4735-15: Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

D4745-14: Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods

D4754-11: Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell

D4764-01(2016): Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint

D4773-02(2012): Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate

D4801-08(2016): Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater

D4802-16: Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

D4827-03(2015): Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography

D4837-07(2012): Standard Specification for Propylene Glycol Monomethyl Ether

D4861-11: Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air

D4896-01(2016): Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results

D4934-02(2017): Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles

D4946-89(2017): Standard Test Method for Blocking Resistance of Architectural Paints

D4985-10(2015): Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)

D501-03(2016): Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents

D5040-90(2016): Standard Test Methods for Ash Content of Adhesives

D5043-04(2009): Standard Practice for Field Identification of Coatings

D5054-90(2014): Standard Test Method for Rubber Chemicals—Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay

D5095-91(2013): Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

D5099-08(2013): Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry

D5117-09: Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

D5125-10(2014): Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

D5138-16: Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

D5160-95(2014): Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon

D520-00(2011): Standard Specification for Zinc Dust Pigment

D5206-13: Standard Test Method for Windload Resistance of Rigid Plastic Siding

D521-02(2012): Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)

D5225-14: Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

D5227-13: Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

D5237-14: Standard Guide for Evaluating Fabric Softeners

D5249-10(2016): Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

D5250-06(2015): Standard Specification for Poly(vinyl chloride) Gloves for Medical Application

D5266-13: Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

D5338-15: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures

D5376-06(2017): Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ

D5403-93(2013): Standard Test Methods for Volatile Content of Radiation Curable Materials

D5418-15: Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)

D5419-14a: Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

D545-14: Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

D5466-15: Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology)

D5467/D5467M-97(2017): Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam

D5477-11: Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

D5491-08(2014): Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials

D5492-17: Standard Test Method for Determination of Xylene Solubles in Propylene Plastics

D5511-12: Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

D5526-12: Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

D5551-95(2012): Standard Test Method for Determination of the Cloud Point of Oil

D5558-95(2017): Standard Test Method for Determination of the Saponification Value of Fats and Oils

D5572-95(2012): Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

D5592-94(2010): Standard Guide for Material Properties Needed in Engineering Design Using Plastics

D562-10(2014): Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer

D5631-15: Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF3Br)

D5644-01(2013): Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

D5667-95(2015): Standard Test Method for Rubber From Synthetic Sources—Total and Water Soluble Ash

D5712-15: Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method

D5721-08(2013): Standard Practice for Air-Oven Aging of Polyolefin Geomembranes

D5723-95(2015): Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence

D5742-16: Standard Test Method for Determination of Butane Activity of Activated Carbon

D5796-10(2015): Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device

D5824-98(2017): Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

D5832-98(2014): Standard Test Method for Volatile Matter Content of Activated Carbon Samples

D5893/D5893M-16: Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

D5895-13: Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders

D5902-05(2015): Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value

D5910-05(2012): Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

D5917-15e1: Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

D5930-17: Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

D5963-04(2015): Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)

D5988-12: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil

D6042-09(2016): Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

D6100-14: Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)

D6108-13: Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

D6109-13: Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

D6110-10: Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

D6147-97(2014): Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression

D6205-12: Standard Practice for Calibration of the James Static Coefficient of Friction Machine

D6206-09(2015): Standard Practice for Sampling of Coating Films

D6229-06(2010): Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

D6237-09(2015): Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

D6248-98(2012)e1: Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

D6264/D6264M-17: Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force

D6266-00a(2017): Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

D6287-09: Standard Practice for Cutting Film and Sheeting Test Specimens

D6289-13: Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

D6341-16: Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)

D6355-07(2017): Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves

D6358-11: Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods

D6370-99(2014): Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)

D6387-99(2014)e1: Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography

D6441-05(2016): Standard Test Methods for Measuring the Hiding Power of Powder Coatings

D6442-06(2012): Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water

D6456-10: Standard Specification for Finished Parts Made from Polyimide Resin

D6474-12: Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

D6484/D6484M-14: Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

D6493-11(2015): Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus

D6578/D6578M-13: Standard Practice for Determination of Graffiti Resistance

D6580-00(2009): Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings

D6583-13: Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

D660-93(2011): Standard Test Method for Evaluating Degree of Checking of Exterior Paints

D6600-00(2013): Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods

D6625-13: Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus

D6646-03(2014): Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon

D6660-01(2014)e1: Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method

D6665-09(2014): Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test

D6686-01(2013): Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings

D6691-09: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum

D6712-17: Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

D6754/D6754M-15: Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

D6783-05(2011): Standard Specification for Polymer Concrete Pipe

D6856/D6856M-03(2016): Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials

D6865-17: Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials

D6869-03(2011): Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

D6878/D6878M-17: Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

D6901-15: Standard Specification for Artists' Colored Pencils

D6904-03(2013): Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

D6943-15: Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings

D6954-04(2013): Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

D696-16: Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

D6977-04(2016): Standard Specification for Polychloroprene Examination Gloves for Medical Application

D6988-13: Standard Guide for Determination of Thickness of Plastic Film Test Specimens

D6991-17e1: Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method

D7011-15: Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

D7029-17: Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)

D704-99(2012): Standard Specification for Melamine-Formaldehyde Molding Compounds

D707-15: Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)

D7083-16: Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

D7085-04(2010)e1: Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

D7127-13: Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

D7137/D7137M-17: Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

D7143-17: Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products

D7144-05a(2016): Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination

D7161-16: Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions

D7183-16: Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

D7191-10: Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

D7194-12: Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)

D7244-06a(2011): Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings

D7247-16: Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures

D7250/D7250M-16: Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness

D7258-17: Standard Specification for Polymeric Piles

D7264/D7264M-15: Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials

D7291/D7291M-15: Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

D7293-12: Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

D7310-11: Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors

D732-17: Standard Test Method for Shear Strength of Plastics by Punch Tool

D7334-08(2013): Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement

D7359-14a: Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

D7376-10a(2016): Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals

D740-11: Standard Specification for Methyl Ethyl Ketone

D7446-09(2017): Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials

D747-10: Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

D7473-12: Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations

D7487-13e1: Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test

D7490-13: Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements

D750-12(2017): Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus

D7504-17a: Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

D7522/D7522M-15: Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate

D7536-16: Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D7542-15: Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

D7588-11: Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container

D7605-11(2016): Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers

D7615/D7615M-11: Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates

D7617/D7617M-11(2017): Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars

D770-11: Standard Specification for Isopropyl Alcohol

D7733-12(2016): Standard Specification for Acrylic Dispersion Ground

D7745-11: Standard Practice for Testing Pultruded Composites

D7766/D7766M-16: Standard Practice for Damage Resistance Testing of Sandwich Constructions

D7767-11: Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them

D7771-17: Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black

D7835/D7835M-13: Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine

D787-12: Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

D789-15: Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)

D813-07(2014): Standard Test Method for Rubber Deterioration—Crack Growth

D814-95(2014): Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids

D822/D822M-13: Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

D841-17a: Standard Specification for Nitration Grade Toluene

D843-17: Standard Specification for Nitration Grade Xylene

D876-13: Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

D896-04(2010)e1: Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents

D907-15: Standard Terminology of Adhesives

D913-15: Standard Practice for Evaluating Degree of Traffic Marking Line Wear

D922-11: Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing

D945-16: Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)

D950-03(2011): Standard Test Method for Impact Strength of Adhesive Bonds

D953-10: Standard Test Method for Bearing Strength of Plastics

D955-08(2014): Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

D98-15: Standard Specification for Calcium Chloride

E1069-85(2009): Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress

E1226-12a: Standard Test Method for Explosibility of Dust Clouds

E1335-08(2017): Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

E1515-14: Standard Test Method for Minimum Explosible Concentration of Combustible Dusts

E1600-15: Standard Test Methods for Determination of Gold in Cyanide Solutions

E1792-03(2016): Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

E2193-16: Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)

E223-16: Standard Test Methods for Analysis of Sulfuric Acid

E2327-15e1: Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis

E2520-15: Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors

E2539-14(2017): Standard Test Method for Multiangle Color Measurement of Interference Pigments

E2664-16: Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol

E28-14: Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus

E2857-11(2016): Standard Guide for Validating Analytical Methods

E2881-13e1: Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry

E394-15: Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method

E406-81(2012): Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis

E411-17a: Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine

E478-08(2017): Standard Test Methods for Chemical Analysis of Copper Alloys

E502-07(2013): Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods

E534-13: Standard Test Methods for Chemical Analysis of Sodium Chloride

E640-06(2012): Standard Test Method for Preservatives in Water-Containing Cosmetics

E681-09(2015): Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)

E698-16: Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method

E865-12: Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

F1001-12(2017): Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials

F1052-14: Standard Test Method for Pressure Testing Vapor Protective Suits

F1057-17: Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

F109-12: Standard Terminology Relating to Surface Imperfections on Ceramics

F1127-07(2013): Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel

F1147-05(2017)e1: Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings

F1160-14: Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings

F1296-08(2015): Standard Guide for Evaluating Chemical Protective Clothing

F1461-12: Standard Practice for Chemical Protective Clothing Program

F1473-16: Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

F1488-14: Standard Specification for Coextruded Composite Pipe

F1563-01(2011): Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing

F1732-12: Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material

F1734-03(2009): Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe

F1839-08(2016): Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments

F1855-00(2011): Standard Specification for Polyoxymethylene (Acetal) for Medical Applications

F1925-09: Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants

F1960-15: Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing

F2003-02(2015): Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air

F2023-15: Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water

F2024-10(2016): Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings

F2038-00(2011): Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials

F2042-00(2011): Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication

F2059-17: Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Swirling Flask

F2098-15: Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings

F2136-08(2015): Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe

F2164-13: Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure

F2212-11: Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)

F2224-09(2014): Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants

F2255-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading

F2258-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in Tension

F2306/F2306M-14e1: Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

F2313-10: Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide

F2320-11: Standard Specification for Rubber Insulating Sheeting

F2392-04(2015): Standard Test Method for Burst Strength of Surgical Sealants

F2418-16a: Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

F2435-15: Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe

F2458-05(2015): Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants

F2536-06b(2011): Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs

F2619/F2619M-13: Standard Specification for High-Density Polyethylene (PE) Line Pipe

F2623-14: Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing

F2634-15: Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

F2764/F2764M-17e1: Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

F2778-09(2015): Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)

F2785-12: Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings

F2820-12: Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications

F2881-11(2015): Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

F2902-16e1: Standard Guide for Assessment of Absorbable Polymeric Implants

F3009-14: Standard Specification for Polyolefin Composition Floor Tile

F402-05(2012): Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

F409-17: Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

F439-13: Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

F441/F441M-15: Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

F442/F442M-13e1: Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

F477-14: Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

F548-09(2014): Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics

F628-12e2: Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

F648-14: Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

F656-15: Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

F726-12: Standard Test Method for Sorbent Performance of Adsorbents

F735-17: Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method

F754-08(2015): Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders

F810-12: Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

F881-94(2014): Standard Specification for Silicone Elastomer Facial Implants

F894-13: Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

F945-12: Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

F964-13: Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

G11-04(2012): Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings

G17-07(2013): Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)

G55-07(2013): Standard Test Method for Evaluating Pipeline Coating Patch Materials

G6-07(2013): Standard Test Method for Abrasion Resistance of Pipeline Coatings

G62-14: Standard Test Methods for Holiday Detection in Pipeline Coatings

G95-07(2013): Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)