New Manufacturing Standards

Search within Manufacturing

E1135-19: Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

UOP1016-17: Ash from Petroleum Products by Microwave

E566-19: Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals

B841-18: Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits

A587-96(2019): Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

E1032-19: Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film

E164-19: Standard Practice for Contact Ultrasonic Testing of Weldments

E2023-19: Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators

F3125/F3125M-18: Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength

E202-18: Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols

D7803-19: Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

E2597/E2597M-14: Standard Practice for Manufacturing Characterization of Digital Detector Arrays

B210/B210M-19: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

D7835/D7835M-19: Standard Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine

G56-18: Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials

F1290-19: Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings

A183-14: Standard Specification for Carbon Steel Track Bolts and Nuts

B975-18: Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)

D2794-93(2019): Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

E165/E165M-18: Standard Practice for Liquid Penetrant Testing for General Industry

A902-18a: Standard Terminology Relating to Metallic Coated Steel Products

C1802-18b: Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Horizontal Access Hatches for Utility, Water, and Wastewater Structures

F645-18b: Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

F1674-18: Standard Test Method for Joint Restraint Products for Use with PVC Pipe

F1193-18a: Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

F835-18: Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

F2946-12(2017): Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes

G132-96(2018): Standard Test Method for Pin Abrasion Testing

G81-97a(2018): Standard Test Method for Jaw Crusher Gouging Abrasion Test

A1004/A1004M-99(2018): Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

A742/A742M-18: Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

B611-13(2018): Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials

D2774-12: Standard Practice for Underground Installation of Thermoplastic Pressure Piping

E1213-14(2018): Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging Systems

E1311-14(2018): Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems

E2491-13(2018): Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

F1667-18a: Standard Specification for Driven Fasteners: Nails, Spikes, and Staples

E1543-14(2018): Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems

E1862-14(2018): Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers

E1897-14(2018): Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

E1933-14(2018): Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers

A381/A381M-18: Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems

E1934-99a(2018): Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

E1209-18: Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

E1254-13(2018): Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

D8232-18: Standard Test Procedures for Measuring the Inclination of Deep Foundations

A484/A484M-18a: Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

A775/A775M-17: Standard Specification for Epoxy-Coated Steel Reinforcing Bars

D6037-18: Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

A674-18: Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

A716-18: Standard Specification for Ductile Iron Culvert Pipe

E2001-18: Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

A924/A924M-18: Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

B637-18: Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

B829-18: Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

E2699-18: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

A1059/A1059M-18: Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products

A1112/A1112M-18: Standard Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes

A388/A388M-18: Standard Practice for Ultrasonic Examination of Steel Forgings

B516-18: Standard Specification for Welded Nickel-Chromium-Aluminum Alloy (UNS N06699) and Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes

A514/A514M-18: Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

E1815-18: Standard Test Method for Classification of Film Systems for Industrial Radiography

E2738-18: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

A1098/A1098M-18: Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)

B675-02(2018): Standard Specification for UNS N08367 Welded Pipe

E1638-18: Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media

E2986-18: Standard Guide for Evaluation of Environmental Aspects of Sustainability of Manufacturing Processes

D1474/D1474M-13(2018): Standard Test Methods for Indentation Hardness of Organic Coatings

G14-04(2018): Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)

G76-18: Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets

E1575-18: Standard Practice for Pressure Water Cleaning and Cutting

E2349-18: Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing

B864/B864M-13(2018): Standard Specification for Corrugated Aluminum Box Culverts

A1094/A1094M-18: Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement

F722-18: Standard Specification for Welded Joints for Shipboard Piping Systems

B488-18: Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses

G195-18: Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser

C537-87(2018): Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage

C538-83(2018): Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels

C743-87(2018): Standard Test Method for Continuity of Porcelain Enamel Coatings

D1732-03(2018): Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting

B912-02(2018): Standard Specification for Passivation of Stainless Steels Using Electropolishing

B921-08(2018): Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys

C385-58(2018): Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils

C536-83(2018): Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing

B111/B111M-18a: Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

B893-98(2018): Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications

E2987/E2987M-18: Standard Terminology for Sustainable Manufacturing

B136-84(2018): Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum

B457-67(2018): Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum

E2223-13(2018)e1: Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

E2427-18: Standard Test Method for Acceptance by Performance Testing for Sieves

E2563-18: Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method

E2564-18: Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method

B965-09(2018): Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability

E2523-13(2018): Standard Terminology for Metalworking Fluids and Operations

F1554-18: Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

E2698-18e1: Standard Practice for Radiographic Examination Using Digital Detector Arrays

A125-96(2018): Standard Specification for Steel Springs, Helical, Heat-Treated