New Energy & Utilities Standards

Search within Energy & Utilities


C791-19: Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide

C809-19: Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets

A985/A985M-19: Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

D229-19: Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation

D2686-19: Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape

D2961/D2961M-19: Standard Practice for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36 mm [No. 8 Sieve] Topsize

D5213-19: Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications

D5341/D5341M-19: Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)

B400/B400M-19: Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

D7148-19: Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System

D2519-19: Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

F2715-19: Standard Specification for Temporary Protective Equipotential Bond Mat To Be Used on De-Energized Equipment

E927-19: Standard Classification for Solar Simulators for Electrical Performance Testing of Photovoltaic Devices

C125-19: Standard Terminology Relating to Concrete and Concrete Aggregates

D117-18: Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids

C1346-19: Standard Practice for Dissolution of UF6 from P-10 Tubes

C1463-19: Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis

C1718-10(2019): Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning

C1474-19: Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry

D7653-18: Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy

E18-19: Standard Test Methods for Rockwell Hardness of Metallic Materials

D2014/D2014M-19: Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven

D4208-18: Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method

B830-18: Standard Specification for Uniform Test Methods and Frequency

A249/A249M-18a: Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

D3175-18: Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke

D3251-19: Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

B1008-18: Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors

E263-18: Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron

D6542-05(2018)e1: Standard Practice for Tonnage Calculation of Coal in a Stockpile

E705-18: Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237

C1413-18: Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry

E853-18: Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results

C1428-18: Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method

D2148-18: Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation

C1661-18: Standard Guide for Viewing Systems for Remotely Operated Facilities

D4059-00(2018): Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

D4559-99(2018): Standard Test Method for Volatile Matter in Silicone Fluid

A381/A381M-18: Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems

D6347/D6347M-05(2018): Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods

E1894-18: Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources

C1210-18: Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry

A352/A352M-18a: Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

C1456-13(2018): Standard Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)

D5424-18: Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

D5425-18: Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

D5537-18: Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

D6194-18: Standard Test Method for Glow-Wire Ignition of Materials

A240/A240M-18: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

C1189-11(2018): Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors

B539-18: Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

D388-18a: Standard Classification of Coals by Rank

A723/A723M-18a: Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

B163-18: Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

D1412/D1412M-18: Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C

D7108-12(2018): Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist

A1098/A1098M-18: Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)

C1254-18: Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence

D3756-18: Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields

A213/A213M-18b: Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

B76-90(2018): Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating

B77-07(2018): Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys

D3874-18: Standard Test Method for Ignition of Materials by Hot Wire Sources

D4880-18: Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire

D5638-18: Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

B359/B359M-18: Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

A1009-18: Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications

D1932-18: Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes

D3145-18: Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method

D3312-18: Standard Test Method for Percent Reactive Monomer in Solventless Varnishes

D3056-14(2018): Standard Test Method for Gel Time of Solventless Varnishes

D3377-04(2018): Standard Test Method for Weight Loss of Solventless Varnishes

D3554-07(2018): Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation

D3555-07(2018): Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation

D6053-14(2018): Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

D6095-12(2018): Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials

D6343-14(2018): Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

D7894/D7894M-14(2018): Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems

D7895/D7895M-14(2018): Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems

C781-18: Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components

D4239-18e1: Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

D7321-18a: Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

D7501-18a: Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

B543/B543M-18: Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

B171/B171M-18: Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

C1562-10(2018): Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems

E3053-18e1: Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel

D2013/D2013M-18: Standard Practice for Preparing Coal Samples for Analysis

C99/C99M-18: Standard Test Method for Modulus of Rupture of Dimension Stone

B258-18: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors

C1662-18: Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method

A234/A234M-18a: Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

C1156-18: Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials

C758-18: Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal

C759-18: Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions

D7843-18: Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

B1-13(2018): Standard Specification for Hard-Drawn Copper Wire

B2-13(2018): Standard Specification for Medium-Hard-Drawn Copper Wire

B3-13(2018): Standard Specification for Soft or Annealed Copper Wire

B416-98(2018): Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors

B738-13(2018): Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors

B869-07(2018): Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

B902/B902M-13(2018): Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction

B910/B910M-07(2018): Standard Specification for Annealed Copper-Clad Steel Wire

B965-09(2018): Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability

C1431-99(2018): Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal

A214/A214M-96(2018): Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

D293/D293M-18: Standard Test Method for the Sieve Analysis of Coke

A556/A556M-18: Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes