All Manufacturing Special Technical Publications

Search within Manufacturing


STP104234: Steel and Hybrid Spacecraft Ball-Bearing Thermal Conductance Comparisons - 01 October 2012

STP103887: Resilient and Corrosion-proof Rolling Element Bearings Made from Superelastic Ni-Ti Alloys for Aerospace Mechanism Applications - 01 October 2012

JAI103534: Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010 - 01 January 2012

JAI103817: Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants - 01 January 2012

STP49295S: Fatigue Crack Propagation Behavior of an Inertia Friction Welded α/β Titanium Alloy - 01 January 2011

STP49298S: Effect of Cladding on Biaxially Loaded Underclad Part-Through Cracks - 01 January 2011

STP49305S: Elastic-Plastic Stress Analysis of Cold-Worked Pin-Loaded Holes - 01 January 2011

STP49005S: Investigation of Beltline Welding Seam of the Greifswald WWER-440 Unit 1 Reactor Pressure Vessel - 01 January 2010

STP49195S: Analysis of the Segerberg Hardening Power Equation - 01 January 2010

STP1523-EB: Quenching and Cooling, Residual Stress and Distortion Control - 01 January 2010

STP49196S: The Influence of Surface Temperature on Rewetting Behavior During Immersion Quenching of Hollow and Solid Cylinders - 01 January 2010

STP49146S: The Effect of Agitation and Quenchant Temperature on the Heat Transfer Coefficients for 6061 Aluminum Alloy Quenched in Distilled Water - 01 January 2010

STP49197S: Dilatometric Analysis to Study Aging of Aluminum Alloys - 01 January 2010

STP49198S: Optimization of the Heat Treatment of a 17-4 PH Stainless Steel by Dilatometric Technique - 01 January 2010

STP49147S: A Review on Modeling and Simulation of Quenching - 01 January 2010

STP49148S: Modeling of Quenching and Tempering Induced Phase Transformations in Steels - 01 January 2010

STP49141S: Accurate Determination of Surface Heat Fluxes during Quenching Characterized by Boiling Water Heat Transfer - 01 January 2010

STP49149S: Improving Control of a Quenching Process by Coupling Analysis Methods - 01 January 2010

STP49151S: Computer Simulation of Quenched Steel Working Stress - 01 January 2010

STP49157S: Using Polyalkylene Glycol Quenchants to Effectively Control Distortion and Residual Stresses in Heat Treated Aluminum Alloys - 01 January 2010

STP49158S: Minimizing Machining Distortion in Aluminum Alloys through Successful Application of Uphill Quenching—A Process Overview - 01 January 2010

STP49160S: The Analysis and Control of Distortion in Carbonitrided and Nitrocarburized Thin-Shelled Plain Carbon Steel Automotive Powertrain Components - 01 January 2010

STP49161S: The Effect of Core and Carburized Surface Microstructural Stability on Residual Stress Evolution during Tempering - 01 January 2010

STP49162S: Explanation on the Origin of Distortion in Induction Hardened Ring Specimens by Computer Simulation - 01 January 2010

STP49140S: Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces - 01 January 2010

STP49142S: Heat Transfer during Quenching and Assessment of Quench Severity—A Review - 01 January 2010

STP49163S: Optimum Strategies to Reduce Residual Stresses and Distortion during the Metal Quenching Process - 01 January 2010

STP49164S: Numerical Simulation of Residual Stresses in Quenched Steel Bodies Using Subroutines to Represent TTT and CCT Diagrams - 01 January 2010

STP49165S: Prediction of Distortion of Automotive Pinion Gears during Quenching Using CFD and FEA - 01 January 2010

STP49166S: Prediction of Quench-Hardness within the Whole Volume of Axially Symmetric Workpieces of Any Shape - 01 January 2010

STP49168S: An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods - 01 January 2010

STP49169S: Starch-Based Quenchants as an Eco-Friendly Alternative to Quenching Oil - 01 January 2010

STP49170S: Comparison of Structure and Quenching Performance of Vegetable Oils - 01 January 2010

STP49171S: Severity of Quenching and Kinetics of Wetting of Nanofluids and Vegetable Oils - 01 January 2010

STP49172S: An Investigation on Quenching Performance of Hot Alkaline Bath - 01 January 2010

STP49173S: A Feasibility Study of the Use of Bismuth Bath to Replace Lead Bath as the Quenching Media for Steel Heat-Treating - 01 January 2010

STP49174S: Spray Quenching in Induction Hardening Applications - 01 January 2010

STP49175S: Technology and Applications of Alternately Timed Quenching Technology - 01 January 2010

STP49176S: One More Discussion “What is Intensive Quenching Process?” - 01 January 2010

STP49143S: Formulation of a Guideline for the Determination of Heat Transfer Coefficient during Gas Quenching - 01 January 2010

STP49177S: Energy Efficient and Eco-friendly Intensively Quenched Limited Hardenability Low Alloy Steels - 01 January 2010

STP49178S: An Overview of Technology and Equipment for Hardening of Large Steel Parts - 01 January 2010

STP49179S: Accelerated Cooling of Steel Plates: The Time Has Come - 01 January 2010

STP49180S: Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties - 01 January 2010

STP49181S: Water and Polymer Quenching of Aluminum Alloys: A Review of the Effect of Surface Condition, Water Temperature, and Polymer Quenchant Concentration on the Yield Strength of 7075-T6 Aluminum Plate - 01 January 2010

STP49182S: Gas-Jet Quenching - 01 January 2010

STP49183S: Quenching Homogeneity and Intensity Improvement in Batch Mode High Pressure Gas Quenching - 01 January 2010

STP49184S: Gas-Cooling of Multiple Short Inline Disks in Flow along Their Axis - 01 January 2010

STP49185S: Numerical Simulation of the Mechanical Properties of Cr12 Steel during Gas Quenching - 01 January 2010

STP49186S: Enhanced Hardenability through Application of Magnetic Fields - 01 January 2010

STP49144S: Determination of Surface Heat Transfer Coefficients of Cr12MoV Steel Cylinder during High-Speed Gas Quenching at Atmospheric Pressure - 01 January 2010

STP49188S: Quenchant Characterization by Cooling Curve Analysis - 01 January 2010

STP49189S: Cooling Characteristic Test of Quenching Media - 01 January 2010

STP49190S: A Complete System for Testing and Evaluation of Quenchants and Quenching Systems - 01 January 2010

STP49145S: Enhancement and Local Regulation of Metal Quenching Using Atomized Sprays - 01 January 2010

STP49191S: Effects of Cooling Rate Fluctuation on Cooling and Transformation Behavior of Steel upon Direct Quenching - 01 January 2010

STP49192S: Correlation between Cooling Curves Obtained with a Silver Probe and Quenching Properties of 5140 Steel Bars - 01 January 2010

STP49193S: Measurement of the Cooling Power of Polyethylene Glycol Aqueous Solutions Used as Quenching Media - 01 January 2010

STP49194S: Evolution of Quench Factor Analysis: A Review - 01 January 2010

STP49132S: Comparison of Inclusion Assessment Rating Standards in Terms of Results and Reliability by Numerical Simulation - 01 January 2010

STP49122S: Case Depth and Static Capacity of Surface Induction-Hardened Rings - 01 January 2010

STP48764S: Fatigue Response of Aluminum Aircraft Structure under Engineered Residual Stress Processing - 01 January 2009

STP48765S: Influence of the Peening Intensity on the Fatigue Behavior of Shot Peened Titanium Components - 01 January 2009

STP48766S: Fretting Fatigue Behavior of Shot-Peened Ti-6Al-4V and IN100 - 01 January 2009

STP48769S: The Influence of Residual Stresses on the Fatigue Strength of Cold-Formed Structural Tubes - 01 January 2009

STP48779S: Statistical Analysis of Fatigue Related Microstructural Parameters for Airframe Aluminum Alloys - 01 January 2009

STP48786S: Effect of Prestrain on Fatigue Crack Growth of Age-Hardened Al 6061-T6 - 01 January 2009

STP48793S: In-situ Fatigue Damage Investigations in Welded Metallic Components by Infrared Techniques - 01 January 2009

STP48794S: Fatigue Crack Growth in Integrally Stiffened Panels Joined Using Friction Stir Welding and Swept Friction Stir Spot Welding - 01 January 2009

STP41645S: Influence of Steel Making and Further Processing on the Distortion of Bearing Steel Components - 01 January 2007

STP41647S: Characteristics of Vanadium Alloyed Carbonitrided Steel for Rolling Bearing Applications - 01 January 2007

STP41650S: Plasma Assisted Heat Treating Processes of Bearing Components - 01 January 2007

STP41635S: Study of Vacuum Carbon-Deoxidization of High Carbon Chromium Bearing Steel - 01 January 2007

STP41654S: Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-Alloyed Stainless Steel - 01 January 2007

STP41634S: A Review of Swedish Bearing Steel Manufacturing and Quality Assurance of Steel Products - 01 January 2007

STP41640S: Radioactivity Inspections Applied to the Steelmaking Industry - 01 January 2007

STP45262S: 3D FEA Simulations to Assess Residual Stresses in Riveting Processes - 01 January 2007

STP45254S: Development of a Fastener Structural Element Test for Certifying Navy Fastener Materials - 01 January 2007

STP45258S: Optimum Thread Rolling Process that Improves SCC Resistance - 01 January 2007

STP45261S: Influence of Cold Rolling Threads before or after Heat Treatment on the Fatigue Resistance of High Strength Fine Thread Bolts for Multiple Preload Conditions - 01 January 2007

STP45330S: An Integrated Approach to the Determination and Consequences of Residual Stress on the Fatigue Performance of Welded Aircraft Structures - 01 January 2007

STP45324S: Effect of Shot Peening on Fatigue Crack Growth in 7075-T7351 - 01 January 2007

STP45325S: Thermal Residual Stress Relaxation in Powder Metal IN100 Superalloy - 01 January 2007

STP45326S: Stress Intensity Factor Analysis and Fatigue Behavior of a Crack in the Residual Stress Field of Welding - 01 January 2007

STP45329S: Influence of Cold Rolling Threads Before or After Heat Treatment on High Strength Bolts for Different Fatigue Preload Conditions - 01 January 2007

STP45381S: Welding of Thermoplastic Roofing Membranes Subjected to different Conditioning Procedures - 01 January 2007

STP37653S: Investigation of Oxygen-Acetylene Flashback Reactions in Welding Hoses - 01 January 2006

STP11302S: Large Commercial Aircraft Loading Spectra: Overview and State of the Art - 01 January 2005

STP11303S: Spectrum Fatigue Testing and Small-Crack Life Prediction Analysis on a Coupon Similar to a Critical Design Detail of a CF188 Hornet Component - 01 January 2005

STP11305S: Spectrum Coupon Testing of Fatigue-Resistant Fasteners for an Aging Military Aircraft - 01 January 2005

STP11320S: Study on Fatigue Design Loads for Ships Based on Crack Growth Analysis - 01 January 2005

STP11327S: Fuzzy Probabilistic Assessment of Aging Aircraft Structures Subjected to Multiple Site Fatigue Damage - 01 January 2005

STP12598S: Can Laboratory Pre-Treatment Of Welders' Protective Clothing Simulate Their Aging Process in Normal Use? - 01 January 2005

STP37509S: Simulation of Cold Pilgering Process by a Generalized Plane Strain FEM - 01 January 2005

STP37512S: The Effect of Beta-Quenching in Final Dimension on the Irradiation Growth of Tubes and Channels - 01 January 2005

STP11287S: Corrosion Risk Assessment of Aircraft Structures - 01 January 2004

STP10839S: Reconstitution of Charpy-V Specimens with CO2 Laser Welding - 01 January 2002

STP10861S: The Effect of V, Al and N on the Fatigue Life of a Carbonitrided Bearings - 01 January 2002

STP38291S: Ceramic Parts for Hydrostatic Pumps and Motors - 01 January 2001

STP38292S: PVD-Coatings — Applications in Fluid Power Technology - 01 January 2001

STP38293S: Improving Tribological Performance of Mechanical Components by Laser Surface Texturing - 01 January 2001

STP14311S: A New Fabrication Process for Zr-Lined Zircaloy-2 Tubing - 01 January 2000

STP12393S: Irradiation Behavior of Submerged Arc Welding Materials with Different Copper Content - 01 January 2000

STP12442S: Stress-Modified Welding of Neutron Irradiated Steels - 01 January 2000

STP12443S: Thick Plate Welding of Irradiated Stainless Steel - 01 January 2000

STP12445S: Modeling of Helium Bubble Formation During Welding of Irradiated Stainless Steels - 01 January 2000

STP13487S: Application of Gate Oxide Integrity Measurements in Silicon Wafer Manufacturing - 01 January 2000

STP14798S: Computer Aided Nondestructive Evaluation Method of Welding Residual Stresses by Removing Reinforcement of Weld (Proposal of a New Concept and Its Verification) - 01 January 2000

STP12503S: Failure Investigation of a Welding Regulator Fire - 01 January 2000

STP15784S: Acoustic Emission Applied to Detect Workpiece Burn During Grinding - 01 January 1999

STP1361-EB: Advances in the Production and Use of Steel with Improved Internal Cleanliness - 01 January 1999

STP12372S: Improving Production, Control and Properties of Bearing Steels Intended for Demanding Applications - 01 January 1999

STP12374S: A Review and Update of Advancements in Clean Cast Steel Technology - 01 January 1999

STP12375S: Clean Steel Technology - Fundamental to the Development of High Performance Steels - 01 January 1999

STP12376S: Sulfur Content of Carbon Steel Plate Material for Dished End Manufacture by Cold Spinning - 01 January 1999

STP15705S: Application and Comparison of SPV and μPCD for Iron Measurement in Silicon Wafer Manufacturing - 01 January 1998

STP15709S: Recombination Lifetime Variations and Defect Introduction by Rapid Thermal Processing - 01 January 1998

STP15715S: Application of Recombination Lifetime Measurements in Silicon Wafer Manufacturing - 01 January 1998

STP15742S: Tribology in Secondary Wood Machining - 01 January 1998

STP1362-EB: Wear Processes in Manufacturing - 01 January 1998

STP15743S: Chaotic Behavior on In-Phase Vibratory Conveyors - 01 January 1998

STP15744S: Erosion and Corrosion Mechanisms in Pneumatic Conveying of Direct Reduced Iron Pellets - 01 January 1998

STP15736S: Observations on the Grinding of Alumina with Variations in Belt Speed, Load, Sample Rotation, and Grinding Fluids - 01 January 1998

STP15745S: Characterization of the Wear Processes due to the Material Erosion Mechanisms - 01 January 1998

STP15737S: Wear Mechanisms of Milling Inserts: Dry and Wet Cutting - 01 January 1998

STP15735S: Use of a Two-Body Belt Abrasion Test to Measure the Grindability of Advanced Ceramic Materials - 01 January 1998

STP15738S: Reducing Tool Wear When Machining Austenitic Stainless Steels - 01 January 1998

STP15739S: Machining Conditions and the Wear of TiC-Coated Carbide Tools - 01 January 1998

STP15740S: Turning of High Strength Steel Alloy with PVD- and CVD-Coated Inserts - 01 January 1998

STP15741S: Evaluation of Coatings and Materials for Rotating Slitter Knives - 01 January 1998

STP16597S: Process Model Development for Optimization of Forged Disk Manufacturing Processes - 01 January 1997

STP16603S: Application of Fem-Based Modeling of Open-Die Forging to Product and Process Development at Bethforge, Inc. - 01 January 1997

STP16612S: Hydrogen and Flaking after 40 Years of Vacuum Degassing - 01 January 1997

STP16595S: Developments in Forging Ingot Production at Bethforge Inc. - 01 January 1997

STP19905S: How the Requirements of the EN-Standard on Welders' Protective Clothing Meet the Demands of Normal Use - 01 January 1997

STP19906S: Evaluation of the Protective Performance of Fabrics and Fabric Combinations Against Molten Iron - 01 January 1997

STP11853S: A Review of Contamination Related Hydraulic Pump Problems in Japanese Injection Molding, Extrusion and Rubber Molding Industries - 01 January 1997

STP16519S: Irradiation Behavior of Weldments of Austenitic Stainless Steel Made by Various Welding Techniques - 01 January 1996

STP16067S: Manufacturing Processes for Semi-Finished Titanium Biomedical Alloys - 01 January 1996

STP16105S: Coating-Substrate Interface Stress Management in Wear Protection of Light Alloy Components - 01 January 1996

STP1278-EB: Effect of Surface Coatings and Treatments on Wear - 01 January 1996

STP16106S: Nanoindentation and Instrumented Scratching Measurements on Hard Coatings - 01 January 1996

STP16107S: Studies on the Characterization and Tribological Behavior of Self-Propagating High-Temperature Synthesis (SHS) Coatings of Chromium Cermet - 01 January 1996

STP16100S: Friction and Wear of Self-Lubricating TiN-MoS2 Coatings Produced by Chemical Vapor Deposition - 01 January 1996

STP16101S: Laser Surface Melting of Carbide Coatings and Their Tribological Behavior - 01 January 1996

STP16099S: Overview of Surface Engineering and Wear - 01 January 1996

STP16102S: Low-Amplitude Fretting of Hard Coatings of TiN, Diamond-Like Carbon, and Polycrystalline Diamond - 01 January 1996

STP16103S: Friction and Wear Mechanisms on CVD Diamond and PVD TiN Coatings under Fretting Conditions - 01 January 1996

STP16104S: Absorption of Organic Compounds and Organometallics on Ceramic Substrates for Wear Reduction - 01 January 1996

STP14614S: The Effect of Welding Discontinuities on the Variability of Fatigue Life - 01 January 1995

STP14615S: Advanced Technology Applications to Aging Aircraft - 01 January 1995

STP14050S: The Effect of Tool Vibration on Tool Wear in Ultrasonic Vibration Cutting - 01 January 1995

STP16438S: Laser-Assisted Cleaning of Contaminated Surfaces - 01 January 1995

STP16440S: Case Study of an Oxygen-Acetylene Cutting Torch Failure and Measured Overpressures Due to Flashback Reactions - 01 January 1995

STP24888S: Corrosion Life Prediction of Oil and Gas Production Processing Equipment - 01 January 1994

STP13200S: Application of Statistical Quality Assurance Techniques to Continuous Process Analyzer Systems for On-Line Product Quality Certification - 01 January 1994

STP13985S: Fatigue Evaluation of Agitator Paddle Shafts - 01 January 1994

STP25096S: New Diamond Grinding Disks for Specimen Surface Preparation - 01 January 1993

STP24787S: Recovery of the Transition Temperature of Irradiated WWER-440 Vessel Metal by Annealing - 01 January 1993

STP24788S: Thermal Annealing of the Reactor Pressure Vessel NPP Unit 2 in Jaslovské Bohunice for Its Radiation Embrittlement Regeneration - 01 January 1993

STP25146S: New Manufacturing Processes for Making WDG Pesticides - 01 January 1993

STP24839S: Improved Properties of Bearing Steels by Advanced Metallurgical Processing - 01 January 1993

STP24840S: Advances in the Production of Bearing Steels by Modern Secondary Metallurgy and Continuous Casting - 01 January 1993

STP24841S: Production of High Life Bearing Steels by Ladle Refining and Electroslag Remelting in Daye, China - 01 January 1993

STP24842S: Use of Rotary Continuous Cast Steel for Production of Tubes for Bearing Applications - 01 January 1993

STP24824S: Finite Element Modeling of Carburizing for Alloy Steels - 01 January 1993

STP24827S: Evaluation of Bearing Steels Produced by Powder Metallurgy Process - 01 January 1993

STP12747S: Application of Reconstitution Welding Technique for Studying Base Metal of a Novovoronesh Unit-1 Trepan Sample - 01 January 1993

STP20165S: An Evaluation of the Current Status of Automated Process Control for Thermosetting Composites - 01 January 1992

STP19589S: Passivation in Rare Earth Metal Chlorides—A New Conversion Coating Process for Aluminum Alloys - 01 January 1992

STP15333S: Friction and Wear Characterization of UHMWPE in Reciprocating Sliding Contact with Co-Cr, Ti-6Al-4V, and Zirconia Implant Bearing Surfaces - 01 January 1992

STP23858S: Wear Testing of Nonmetallic Materials for Bearing Applications - 01 January 1992

STP19104S: Monitoring of the Machining Process by Means of Acoustic Emission Sensors - 01 January 1991

STP19082S: Monitoring Electron Beam Welding Process Using Electro-Magnetic Acoustic Transducers (EMAT's) - 01 January 1991

STP23629S: Morphology and Laser Damage Studies by Atomic Force Microscopy of E-Beam Evaporation Deposited AR and HR Coatings - 01 January 1991

STP23638S: High Laser Damage Threshold and Low Cost Sol-Gel Coated Epoxy-Replicated Mirrors - 01 January 1991

STP23639S: Fabrication and Characterisation of Microwave Plasma Assisted Chemical Vapour Deposited Dielectric Coatings - 01 January 1991

STP23640S: Reactive Ion-Beam-Sputtering of Fluoride Coatings for the UV/VUV Range - 01 January 1991

STP23643S: Ion Assisted Deposition of Graded Index Silicon Oxynitride Coatings - 01 January 1991

STP23616S: Ion Beam Milling of Fused Silica for Window Fabrication - 01 January 1991

STP24960S: EB Welding of Low-Activation Vanadium-Binary Alloys - 01 January 1990

STP26073S: Biotechnology: Is There a Role for Medical Surveillance? - 01 January 1990

STP1051-EB: Bioprocessing Safety: Worker and Community Safety and Health Considerations - 01 January 1990

STP26074S: Public Perception of Biotechnology: Green Revolution or Green Monster? - 01 January 1990

STP26075S: Community Awareness: Cooperation or Confrontation - 01 January 1990

STP26076S: Facing Frankenstein: The Importance of Public Participation - 01 January 1990

STP26077S: Township Review of a New Bioprocessing Facility in Henrietta, New York - 01 January 1990

STP26078S: Minimal Guidelines for Biotechnology Safety—Activities of the United Nations Specialized Agencies - 01 January 1990

STP26064S: Safety in Bioprocessing: An Industrial Perspective - 01 January 1990

STP26079S: FDA Enforcement in Bioprocessing Facilities - 01 January 1990

STP26080S: Biotechnology Facility Approval at the Local Level: The Cambridge, Massachusetts, Experience - 01 January 1990

STP26065S: Perspectives on Opportunities Toward a Hazard-Free Bioprocessing Environment - 01 January 1990

STP26067S: Containment and Regulations for Safe Biotechnology - 01 January 1990

STP26068S: The Biological Production Facility—Design for Protection of the Worker and the Community - 01 January 1990

STP26063S: The NIH Recombinant DNA Advisory Committee: An Example of the Self-Regulatory Process - 01 January 1990

STP26069S: Design Criteria for Safety in the Isolation and Purification of Antibiotics and Biologically Active Compounds - 01 January 1990

STP26070S: Industrial Safety for the Biotechnology Industry - 01 January 1990

STP26071S: General Considerations for Work Practices and Personal Protective Equipment in Biotechnology Industries - 01 January 1990

STP26072S: Safe and Effective Spill Control Within Biotechnology Plants - 01 January 1990

STP23495S: Microscopic Evaluation of High-Density Polyethylene Geomembrane Field-Welding Techniques - 01 January 1990

STP26484S: The Effect of Laser Annealing on Laser Induced Damage Threshold - 01 January 1990

STP26493S: Ultra-Precision Grinding of LHG-8 Laser Glass and Laser Damage Thresholds - 01 January 1990

STP26511S: Damage Resistant Optical Coatings Prepared Using High Temperature, Plasma Chemical-Vapor-Deposition - 01 January 1990

STP26512S: A High Temperature, Plasma-Assisted Chemical Vapor Deposition System - 01 January 1990

STP26513S: The Evolution of Molecular Beam Deposition (MBD) from Laboratory to Production Usage - 01 January 1990

STP26515S: High Damage Threshold AlO.OH-SiO2 HR Coatings Prepared by the Sol-Gel Process - 01 January 1990

STP18640S: Welding Information Systems - 01 January 1989

STP18862S: Influence of the Manufacturing Process on the Corrosion Resistance of Zircaloy-4 Cladding - 01 January 1989

STP24580S: The Influence of Residual Copper in Annealed and Postweld Heat Treated 2-1/4Cr-1Mo Steel - 01 January 1989

STP24569S: Production of Super Clean Steels—Deoxidation Mechanism During Ladle Refining - 01 January 1989

STP24592S: Resin Impregnation During the Manufacture of Thermoplastic Matrix Composite Materials - 01 January 1989

STP24595S: Pultrusion Process Modeling - 01 January 1989

STP25266S: Accrediting Component and Materials Suppliers Laboratories - 01 January 1989

STP26033S: High Dose Arsenic Implant for Bipolar Buried Layers - 01 January 1989

STP990-EB: Semiconductor Fabrication: Technology and Metrology - 01 January 1989

STP26034S: Accurate Junction-Depth Measurements Using Chemical Staining - 01 January 1989

STP26035S: Use of Polysilicon Deposition in a Cold-Wall LPCVD Reactor to Determine Wafer Temperature Uniformity - 01 January 1989

STP26036S: Dry Etching Techniques for MMIC Fabrication on GaAs - 01 January 1989

STP26037S: Dry Etching of Ion Implanted Silicon: Electrical Effects - 01 January 1989

STP26038S: Reaction Mechanisms and Rate Limitations in Dry Etching of Silicon Dioxide with Anhydrous Hydrogen Fluoride - 01 January 1989

STP26026S: Silicon Slice Fracture Analysis - 01 January 1989

STP26039S: Plasma Etching of Aluminum Alloys in BCL3/CL2 Plasmas - 01 January 1989

STP26040S: NBS Submicron Particle Standards for Microcontamination Measurement - 01 January 1989

STP26041S: Particulate Cleanliness Testing of Filters and Equipment in Process Fluids - 01 January 1989

STP26042S: Parameters Controlling Counting Efficiency for Optical Liquid-Borne Particle Counters - 01 January 1989

STP26043S: A Correlation Study of Aluminum Film Wet Etch Uniformity with the Sputter Etch of Oxide Films - 01 January 1989

STP26044S: Crack Free and Highly Reliable Double Level Metallization Process Using Plasma Oxide and Silanol-Type Sog Layers - 01 January 1989

STP26045S: VLSI Defect Detection, Classification, and Reduction from In-Process and Post-Process Sram Inspections - 01 January 1989

STP26046S: Advanced VLSI Isolation Technologies - 01 January 1989

STP26047S: Application of Total Reflection X-Ray Fluorescence Analysis for Metallic Trace Impurities on Silicon Wafer Surfaces - 01 January 1989

STP26027S: Characterization of High Growth Rate Epitaxial Silicon from a New Single Wafer Reactor - 01 January 1989

STP26048S: Chemical Analysis of Metallic Impurity on the Surface of Silicon Wafers - 01 January 1989

STP26049S: Process - Induced Influence on the Minority — Carrier Lifetime in Power Devices - 01 January 1989

STP26050S: The Role of Oxygen Precipitates in the Gettering of Iron in Silicon - 01 January 1989

STP26051S: The Calibration and Reproducibility of Oxygen Concentration in Silicon Measurements using Sims Characterization Technique - 01 January 1989

STP26052S: Defect, Dopant, and Device Modification using Si(Ge,B) Epitaxy - 01 January 1989

STP26053S: Effect of Pre- and Post-Epitaxial Annealing on Oxygen Precipitation and Internal Gettering in N/N+(100) Epitaxial Wafers - 01 January 1989

STP26054S: Electrical Characterization of Electrically Active Surface Contaminants by Epitaxial Encapsulation - 01 January 1989

STP26055S: Optimum Polysilicon Deposition on Wafer Backs for Gettering Purposes - 01 January 1989

STP26056S: Modification of Control Charts for Use in an Integrated Circuit Fabrication Environment - 01 January 1989

STP26028S: Softening of Si and GaAs During Thermal Process - 01 January 1989

STP26029S: Nucleation and Growth Kinetics of Bulk Microdefects in Heavily Doped Epitaxial Silicon Wafers - 01 January 1989

STP26030S: On the Application of Calibration Data to Spreading Resistance Analysis - 01 January 1989

STP26025S: The Effect of a Rotational Magnetic Field on MCZ Crystal Growing - 01 January 1989

STP26031S: Epitaxial Silicon Quality Improvement by Automatic Surface Inspection - 01 January 1989

STP26032S: Spreading Resistance Profiles in Gallium Arsenide - 01 January 1989

STP19699S: Pin-On-Disk Wear Tests for Evaluating Ceramic Cutting Tool Materials - 01 January 1988

STP19700S: Systematic Testing of Ceramic Rolling Bearing Elements - 01 January 1988

STP18550S: Ultrasmooth Sapphire Produced by Noncontact Polishing - 01 January 1988

STP18566S: An Investigation of Laser Processing of Thin Film Coatings - 01 January 1988

STP18567S: Influence of Post-deposition Treatment by UV Light and Oxygen (ozone) on 350 nm Damage Thresholds of SiO2 Films Deposited From Sols - 01 January 1988

STP18577S: Fabrication of Fluoride Thin Films Using Ultra-High Vacuum Techniques - 01 January 1988

STP18578S: Chemical Vapor Deposition of TiO2 Thin Films at Room Temperature - 01 January 1988

STP18580S: Application of Sol-Gel Coating to Slab Laser - 01 January 1988

STP18582S: Comparison of the Optical Properties of some High-Index Oxide Films prepared by Ion Beam Sputter Deposition with those of Electron Beam Evaporated Films - 01 January 1988

STP18591S: An Investigation of Laser Processing of Silica Surfaces - 01 January 1988

STP18594S: Effect of Diamond Machining on Laser Damage Threshold of Germanium - 01 January 1988

STP24397S: Influence of Optical Components for Laser Processing - 01 January 1988

STP24418S: A New Forming Technology Using Laser Damage - 01 January 1988

STP24419S: UV Light Cleaning of Silica Surfaces for Improved Laser Damage of AR Coatings - 01 January 1988

STP24428S: Laser Damage Studies of Ion Beam Milled Fused Silica - 01 January 1988

STP24434S: Ion Assisted Deposition of Optical Thin Films at Reduced Substrate Temperature - 01 January 1988

STP24435S: Optical Properties of Low Energy Ion Assisted Deposited TiO2 Films - 01 January 1988

STP24438S: Oxide Optical Coatings Prepared by Metal-Organic Vapor Deposition - 01 January 1988

STP24440S: Cluster Beam Deposition for Optical Thin Films - 01 January 1988

STP24446S: The Properties of Laser Annealed Dielectric Films - 01 January 1988

STP23288S: Fatigue Behavior of 5Ni-Cr-Mo-V Steel Weldments Containing Fabrication Discontinuities - 01 January 1988

STP45294S: A Study of the Effect of Voids on Hydrogen Diffusion Through Electroslag Refined Steel - 01 January 1988

STP45305S: Testing of Welding Electrodes for Diffusible Hydrogen and Coating Moisture - 01 January 1988

STP979-EB: MiCon 86: Optimization of Processing, Properties, and Service Performance Through Microstructural Control - 01 January 1988

STP26229S: Failsafe Rating of Ball Bearing Components - 01 January 1988

STP987-EB: Effect of Steel Manufacturing Processes on the Quality of Bearing Steels - 01 January 1988

STP26230S: The Role of Carbides in Performance of High-Alloy Bearing Steels - 01 January 1988

STP26231S: Rolling Contact Fatigue Life of Various Kinds of High-Hardness Steels and Influence of Material Factors on Rolling Contact Fatigue Life - 01 January 1988

STP26232S: Relationship of Melting Practice, Inclusion Type, and Size with Fatigue Resistance of Bearing Steels - 01 January 1988

STP26234S: The Distribution and Quantitative Relationship of Oxygen and Inclusions in High-Carbon Ball Bearing Steel - 01 January 1988

STP26235S: The Development of an ASTM Standard Analytical Method for the Determination of Oxygen in Steel - 01 January 1988

STP26236S: Current Status of Round-Robin Testing of Oxygen Content in Bearing Steels - 01 January 1988

STP26237S: Analysis of Microinclusions in Through-Hardening Bearing Steels - 01 January 1988

STP26238S: Measurement of Extremely Low Inclusion Contents by Image Analysis - 01 January 1988

STP26239S: Inclusion Assessment in Steel Using the New Jernkontoret Inclusion Chart II for Quantitative Measurements - 01 January 1988

STP26240S: The Ladle Refining Process for Bearing-Quality Steels - 01 January 1988

STP26241S: Quality of High-Carbon Chromium Bearing Steel Produced in the Electric Arc Furnace—Ladle Furnace—RH Vacuum Degassing Vessel—Vertical Continuous Caster - 01 January 1988

STP26242S: New Developments in the Production and Testing of Bearing Steels - 01 January 1988

STP26243S: Oxygen Content, Oxidic Microinclusions, and Fatigue Properties of Rolling Bearing Steels - 01 January 1988

STP26244S: The Effects of Ladle Refining, With and Without Vacuum, on Bearing Steel Quality - 01 January 1988

STP26245S: Fatigue Life of High-Carbon Chromium Ball Bearing Steel Produced by Electric Furnace—Vacuum Slag Cleaner—Ladle Furnace—RH Degassing—Curved Continuous Caster - 01 January 1988

STP26246S: Properties of Through-Hardening Bearing Steels Produced by BOF Blowing Metallurgy and by Electric Arc Furnace with Ladle Metallurgy - 01 January 1988

STP26247S: Ladle Refining: An Integral Part of Bearing Steel Manufacture - 01 January 1988

STP26225S: Selection of Rolling-Element Bearing Steels for Long-Life Applications - 01 January 1988

STP26227S: Quantitative Inclusion Ratings and Continuous Casting: User Experience and Relationships with Rolling Contact Fatigue Life - 01 January 1988

STP26228S: Effects of Material Properties on Bearing Steel Fatigue Strength - 01 January 1988

STP26223S: - 01 January 1988

STP26366S: Summary - 01 January 1988

STP993-EB: Mechanical Relaxation of Residual Stresses - 01 January 1988

STP26357S: Relief of Residual Stresses in a High-Strength Aluminum Alloy by Cold Working - 01 January 1988

STP26361S: Measurement of Vibration-Induced Stress Relief in the Heavy Fabrication Industry - 01 January 1988

STP26362S: Vibratory Stress Relief of Welded Parts - 01 January 1988

STP26363S: Proposed Investigation of Process for Reducing Residual Welding Stresses and Distortion by Vibration (Abstract Only) - 01 January 1988

STP26364S: Prediction of Residual Stress Relaxation During Fatigue - 01 January 1988

STP26356S: Residual Stress Alterations via Cold Rolling and Stretching of an Aluminum Alloy - 01 January 1988

STP26365S: Effects of Grinding Conditions on Fatigue Behavior of 42CD4 Grade Steel; Comparison of Different Fatigue Criteria Incorporating Residual Stresses - 01 January 1988

STP26400S: Compositional Analysis of Light-Duty Motor Bearings in Fuel Pumps - 01 January 1988

STP28113S: Recycling Off-Grade Zircaloy Scrap Using a Molten-Salt Electro-Refining Process - 01 January 1987

STP28114S: Influence of Hydrostatic Extrusion on Properties of Zirconium and Zircaloys - 01 January 1987

STP28116S: Laser Beam Beta Heat Treatment of Zircaloy - 01 January 1987

STP28132S: Effect of Beta Quenching on the Microstructure and Corrosion of Zircaloys - 01 January 1987

STP28149S: Effect of Cold Reduction on Anisotropy of Zircaloy Tubing - 01 January 1987

STP28151S: Cold-Rolled and Annealed Textures of Zircaloy-4 Thin Strips - 01 January 1987

STP20032S: Internal Stress Measurements of Electroless Nickel Coatings by the Rigid Strip Method - 01 January 1987

STP947-EB: Testing of Metallic and Inorganic Coatings - 01 January 1987

STP20033S: Thickness of Metal Coatings - 01 January 1987

STP20034S: Measurement of the Thickness of Extremely Thin Inorganic Coatings of Metals - 01 January 1987

STP20036S: Determining Coating Composition - 01 January 1987

STP20037S: Corrosion Testing of Materials with Metallic and Inorganic Coatings - 01 January 1987

STP20038S: Porosity Testing of Metallic Coatings - 01 January 1987

STP20040S: Field Testing the Durability of One-Component and Two-Component Zinc Silicate Coatings - 01 January 1987

STP20041S: Corrosion Performance of Aluminum and Zinc-Aluminum Thermal Spray Coatings in Marine Environments - 01 January 1987

STP20043S: A Review and Evaluation of Instrumental Methods of Testing Phosphate Coatings - 01 January 1987

STP20044S: Overview of Coating Materials, Surface Treatments, and Screening Techniques for Tribological Applications—Part 1: Coating Materials and Surface Treatments - 01 January 1987

STP20045S: Overview of Coating Materials, Surface Treatments, and Screening Techniques for Tribological Applications—Part 2: Screening Techniques - 01 January 1987

STP20046S: Ring Shear Testing of Deposited Coatings - 01 January 1987

STP20028S: Ductility of Plated Metal Films: Its Measurement and Relationship to Microstructure - 01 January 1987

STP20048S: Selected Bibliography on Adhesion Measurement of Films and Coatings - 01 January 1987

STP20025S: Technical Overview on Mechanical and Physical Property Measurements on Coatings - 01 January 1987

STP20029S: Analysis and Experimental Evaluation of Materials for Biaxial Stretchability - 01 January 1987

STP20031S: Microhardness Testing of Plated Coatings: Recent Round-Robin Experiences - 01 January 1987

STP25748S: The Electrical Properties of MOS Transistors Fabricated with Direct Ion Beam Nitridation - 01 January 1987

STP25749S: Rie Damage and Its Control in Silicon Processing - 01 January 1987

STP25750S: The Bonding Structure and Compositional Analysis of Plasma Enhanced and Low Pressure Chemical Vapor Deposited Silicon Dielectric Films - 01 January 1987

STP25752S: Profile Control of Plasma Etched Polysilicon Using Implant Doping - 01 January 1987

STP25737S: Low Temperature and Low Pressure Silicon Epitaxy by Plasma-Enhanced CVD - 01 January 1987

STP25753S: The Effects of Plasma Processing of Dielectric Layers on Gallium Arsenide Integrated Circuits - 01 January 1987

STP25754S: Quality Control and Optimization During Plasma Deposition of a-Si:H - 01 January 1987

STP25765S: Damage Aspects of Ingot-to-Wafer Processing - 01 January 1987

STP25739S: Thin Epitaxial Silicon by CVD - 01 January 1987

STP25780S: Particle and Material Control Automation System for VLSI Manufacturing - 01 January 1987

STP25795S: Production Monitoring of 200MM Wafer Processing - 01 January 1987

STP25798S: Wafer Fab Automation, an Integral Part of the CAM Environment - 01 January 1987

STP25799S: Computer Integrated Manufacturing: The Realities and Hidden Costs of Automation - 01 January 1987

STP33026S: Rapid Solidification of Highly Undercooled Aluminum Powders - 01 January 1986

STP33029S: A Comparative Evaluation of Aluminum Alloy Powders Used for Fabricating High-Strength Powder Metallurgy Extrusions - 01 January 1986

STP33033S: Microstructure of Supercooled Submicrometre Aluminum-Copper Alloy Powder - 01 January 1986

STP33035S: Powder Metallurgy Processing of Aluminum Alloy 7091 - 01 January 1986

STP33036S: Dynamic Compaction of Rapidly Solidified Aluminum Alloy Powders - 01 January 1986

STP33037S: Effects of Alloy Chemistry on Superplastic Forming of Rapid-Solidification-Processed Aluminum-Lithium Alloys - 01 January 1986

STP33038S: Thermomechanical Treatment of 2124 PM Aluminum Alloys with Low and High Dispersoid Levels - 01 January 1986

STP33039S: Effective Method for Degassing Evaluation of Aluminum PM Alloys - 01 January 1986

STP35361S: Fabrication and Mechanical Properties of Multidimensionally (X-D) Braided Composite Materials - 01 January 1986

STP17302S: Testing of Candidate Glove Materials Against Metal Cutting Fluids - 01 January 1986

STP17367S: Optimizing Mechanical Properties of Specialty, Stainless, and Heat-Resistant Alloy Steel Forgings by Thermomechanical Processing - 01 January 1986

STP17368S: Application of New Types of Ingots to the Manufacturing of Heavy Pressure Vessel Forgings - 01 January 1986

STP17370S: Manufacturing of Large and Integral-Type Steel Forgings for Nuclear Steam Supply System Components - 01 January 1986

STP17372S: Best Possible Heat Treatment of Steel SA 336 F22 for the Production of Forged Shells with Heavy Walls - 01 January 1986

STP17373S: Production of a 304 Stainless Steel Nuclear Reactor Forging from a Very Large Electroslag Refined Ingot - 01 January 1986

STP17374S: Survey of New Developments in Forging Techniques and Equipment - 01 January 1986

STP17351S: The Effect of Alloying Elements and Steelmaking Processes on the “A” Segregation Occurrence in Large Ingots - 01 January 1986

STP17375S: Forging Force Requirements with Special Regard to Shear Resistance of the Forge Material - 01 January 1986

STP17376S: Forging of Long-Stroke Crankshafts by the TR Method - 01 January 1986

STP17377S: Cryogenic Mechanical Properties of A286 Alloy and 304LN Stainless Steel Used in Fabrication of Support Struts for Superconducting Magnets - 01 January 1986

STP17378S: Steel Forgings for a Tension Leg Platform Anchoring System—The Design and Management Contractor's Experience of Their Manufacture and Testing - 01 January 1986

STP17353S: Manufacture of Differentially Heat-Treated Turbine Rotor Forgings - 01 January 1986

STP908-EB: Corrosion Monitoring in Industrial Plants Using Nondestructive Testing and Electrochemical Methods - 01 January 1986

STP17447S: Overview of Corrosion Monitoring in Modern Industrial Plants - 01 January 1986

STP17453S: Techniques for the Evaluation of Cooling Water Corrosion and Scale Inhibitors in the Laboratory and at the Industrial Plant Site - 01 January 1986

STP18386S: Required Reliability of Reactive Metal Mill Products and Process Equipment - 01 January 1986

STP18393S: Effect of the Brittle-Bead Welding Conditions on the Nil-Ductility Transition Temperature - 01 January 1986

STP23120S: Oxygen Threshold for Ion-Bean Sputter Deposited Oxide Coatings - 01 January 1986

STP34516S: Welding Institute Research on the Fatigue Precracking of Fracture Toughness Specimens - 01 January 1985

STP34228S: Flexible Manufacturing Systems: The MODIAC Project - 01 January 1985

STP862-EB: Automated Manufacturing - 01 January 1985

STP34220S: Use of ASTM Standards in Integrated Manufacturing Systems - 01 January 1985

STP34229S: Manufacturing Process Control Specification with Functional Programming - 01 January 1985

STP34230S: An Examination of the IDEF0 Approach Used as a Potential Industry Standard for Production Control System Design - 01 January 1985

STP34231S: A Relational Approach to the Integrated Database Management System for Computer-Aided Manufacturing - 01 January 1985

STP34232S: Practical Problems in the Application of Industrial Robots - 01 January 1985

STP34233S: A Hierarchical Model-Based Control System for Inspection - 01 January 1985

STP34234S: The U.S. Army's Computer-Aided Design Center at Edgewood, Maryland - 01 January 1985

STP34235S: Integration of Process Control and Management Information Systems in a Rolling Mill - 01 January 1985

STP34236S: Functions and Dimensions of Distributed Assembly Automation: An Analytical Networking Approach - 01 January 1985

STP34221S: EIA and ISO Numerical Control Standards for Automated Manufacturing Systems - 01 January 1985

STP34237S: Some Comments on the Crisis in Engineering and Engineering Technology Education - 01 January 1985

STP34238S: Integrated Standards Structure for Automated Manufacturing - 01 January 1985

STP34239S: Summary - 01 January 1985

STP34222S: The Role of Standards in the Factory with a Future - 01 January 1985

STP34223S: Standardization Suggested by the Automated Manufacturing Research Facility (AMRF)—A Research Testbed for the Factory of the Future - 01 January 1985

STP34219S: Opening Remarks - 01 January 1985

STP34224S: A Standard for the Intercommunication of Computers in a Flexible Manufacturing System - 01 January 1985

STP34225S: Industrial Automation—The U.S. Government's Productivity and Standardization Initiatives - 01 January 1985

STP34226S: The Need for Hierarchical Standards for Automated Integrated Manufacturing - 01 January 1985

STP34227S: Automation, Information Systems, and Management: What Now? - 01 January 1985

STP33797S: Surface Preparation Requirements for ASTM A 262 - 01 January 1985

STP32958S: Fabrication and Certification of Electroformed Microhardness Standards - 01 January 1985

STP38712S: Closed-Loop Temperature Control for High-Frequency Electric-Resistance Tube and Pipe Welding Mills - 01 January 1985

STP38707S: Mold Temperature Measurement for Glass-Pressing Processes - 01 January 1985

STP38709S: Radiation Thermometry for Semiconductor Crystal Growing Furnaces - 01 January 1985

STP28982S: Optical Characterization of Low-Scatter, Plasma-Deposited Thin Films - 01 January 1985

STP28983S: Optical Properties of Ion-Beam Sputtered TiO2 Films - 01 January 1985

STP28994S: Experimental Observation and Computer Simulation of the Microstructure of Vapor Deposited Thin Films - 01 January 1985

STP28996S: Plasma Deposited Inorganic Thin Films for Optical Applications - 01 January 1985

STP34470S: Flow Softening and Anneal Hardening in Two-Phase Zr-2.5Nb - 01 January 1984

STP34459S: New Process for Zirconium and Hafnium Separation - 01 January 1984

STP34460S: New Solvent Extraction Process for Zirconium and Hafnium - 01 January 1984

STP34461S: Electron-Beam Remelting of Zircaloys - 01 January 1984

STP34458S: Extractive Metallurgy of Zirconium—1945 to the Present - 01 January 1984

STP30217S: Use of Image Analysis for Assessing the Inclusion Content of Low-Alloy Steel Powders for Forging Applications - 01 January 1984

STP30213S: Application of Quantitative Metallography to the Analysis of Grain Growth During Liquid-Phase Sintering - 01 January 1984

STP30214S: Effects of Deformation Twinning on the Stress-Strain Curves of Low Stacking Fault Energy Face-Centered Cubic Alloys - 01 January 1984

STP29523S: Blast Cleaning with Zinc-Coated Abrasives - 01 January 1984

STP29525S: Effects of Rotary Peening and Surface-Conditioning Products on Structural Steel - 01 January 1984

STP32647S: Dry Etching Using NF3/Ar and NF3/He Plasmas - 01 January 1984

STP850-EB: Semiconductor Processing - 01 January 1984

STP32648S: Edge-Controlled, Self-Consistent Proximity Effect Corrections - 01 January 1984

STP32649S: The Effect of Wafer Flatness on Yield by Off-Line Computer Simulation of the Photolithographic Process - 01 January 1984

STP32650S: Forms of Contamination Affecting Device Processing - 01 January 1984

STP32652S: Point-Of-Use Ultrafiltration of Deionized Rinse Water and Effects on Microelectronics Device Quality - 01 January 1984

STP32641S: Process and Device Modeling for VLSI Structures - 01 January 1984

STP32656S: Precipitation Behavior of Deposited Metals in Cz-Silicon - 01 January 1984

STP32642S: Effect of Process Conditions on Autodoping in Silicon Epitaxy - 01 January 1984

STP32672S: The Annealing and Low Temperature Aging Characteristics of Fine Diameter Wire Produced from Dilute Aluminum Alloys - 01 January 1984

STP32643S: An Intrinsic Gettering Process to Improve Minority Carrier Lifetimes in Mos and Bipolar Silicon Epitaxial Technology - 01 January 1984

STP32675S: New Applications of Tape Bonding for High Lead Count Devices - 01 January 1984

STP32676S: Bumped Tape Processing and Application - 01 January 1984

STP32677S: Production and Development of Neutron Transmutation Doped Silicon - 01 January 1984

STP32678S: Production of Detector-Grade Silicon by Neutron Transmutation Doping - 01 January 1984

STP32679S: Neutron Transmutation Doping in Hydrogenated Amorphous Silicon - 01 January 1984

STP32681S: Neutron Transmutation Doping of Semi-Insulating Czochralskigrown GaAs - 01 January 1984

STP32682S: Ion Channeling Study of Damage in Neutron Transmutation Doped Semiconductors: Application to GaAs - 01 January 1984

STP32683S: A New Silicon Irradiation Facility in the Pluto Mtr at Harwell - 01 January 1984

STP32685S: Potential for Large-Diameter NTD Silicon Production in the Advanced Test Reactor - 01 January 1984

STP32686S: Advanced Test Reactor Ntd Silicon Production Hardware - 01 January 1984

STP32644S: Control of Gain Variations in Shallow Junction Ion Implanted Bipolar Transistors Caused by Planar Channelling - 01 January 1984

STP32645S: Ion Implantation for Deep (> 100 μm) Buried Layers - 01 January 1984

STP32646S: A Study of Strain in Ion Implanted Silicon - 01 January 1984

STP32640S: The Impact of Standards on Semiconductor Quality and Manufacturing Efficiency - 01 January 1984

STP31768S: Interaction of Gage and Hardenability on the Properties of Quenched and Tempered 2¼Cr-1Mo Steel Plate - 01 January 1983

STP10007S: Stud Welding of Prolongations to Plate for Through-Thickness Tension Test Specimens - 01 January 1983

STP28542S: Calculation of Cure Process Variables During Cure of Graphite/Epoxy Composites - 01 January 1983

STP797-EB: Composite Materials: Quality Assurance and Processing - 01 January 1983

STP28543S: Characterization of Some Solvent-Resistant Thermoplastic Matrix Composites - 01 January 1983

STP28544S: Effect of Microstructure on the Mechanical Behavior of Sheet Molding Compound Composites - 01 January 1983

STP28545S: Characterization of Quick-Cure and Vacuum-Bag Cure Composites - 01 January 1983

STP28536S: The Development of a Material Specification for 177°C (350°F) Curing Graphite/Epoxy Composites - 01 January 1983

STP28537S: Control of Composite Cure Processes - 01 January 1983

STP28539S: A Four-Point Shear Test for Graphite/Epoxy Composites - 01 January 1983

STP28540S: Nondestructive Evaluation of Composite Materials: A Philosophy, An Approach, and An Example - 01 January 1983

STP28541S: Void Formation and Transport During Composite Laminate Processing: An Initial Model Framework - 01 January 1983

STP37249S: Surface Finishing Using Soft Abrasives - 01 January 1983

STP37267S: Graded-index Antireflective Coatings for High Power Lasers Deposited by the Sol-Gel Process - 01 January 1983

STP37269S: A Review of 1064-nm Damage Tests of Electron-Beam Deposited Ta2O5/SiO2 Antireflection Coatings - 01 January 1983

STP37270S: Preparation of Thin Amorphous Films by E-Beam Evaporation from Multiple Sources - 01 January 1983

STP37275S: The Deposition of Diamondlike Carbon Thin Films on CaF2 - 01 January 1983

STP36162S: Resist Profile Quality and Linewidth Control - 01 January 1983

STP804-EB: Silicon Processing - 01 January 1983

STP36163S: Considerations of Resist Processing - 01 January 1983

STP36164S: Epitaxy: An Introspective Review - 01 January 1983

STP36165S: Modeling and Applications of Silicon Epitaxy - 01 January 1983

STP36166S: Effects of Processing Parameters on Shallow Surface Depressions During Silicon Epitaxial Deposition - 01 January 1983

STP36167S: Improvement in MOS VLSI Device Characteristics Built on Epitaxial Silicon - 01 January 1983

STP36168S: Reduced-Pressure Chemical Vapor Deposition of Polycrystalline Silicon - 01 January 1983

STP36169S: Plasma-Enhanced Chemical Vapor Deposition of Silicon and Silicon-Containing Films - 01 January 1983

STP36170S: Process Technology Requirements for VLSIC Fabrication - 01 January 1983

STP36171S: Defects and High-Pressure Steam Oxidation of Silicon - 01 January 1983

STP36172S: Hydrogen/Chlorine Distributions in Silicon Dioxide: Detection and Model - 01 January 1983

STP36157S: Large-Diameter Czochralski Silicon Crystal Growth - 01 January 1983

STP36173S: Dependence of Thin-Gate Oxide Properties on Processing - 01 January 1983

STP36174S: Polyimide-Substrate Effects During Wet Chemical Processing of Polyimide Films in VLSI - 01 January 1983

STP36175S: Modeling Anomalous Junction Formation in Silicon by the Codiffusion of Implanted Arsenic with Phosphorus - 01 January 1983

STP36176S: Silicon Crystals for VLSI Technologies - 01 January 1983

STP36177S: Material Defect Factors Affecting MOS Device Performance - 01 January 1983

STP36178S: Oxygen Precipitation Studies at Various Impurity Levels Using Thermal Donor Activation - 01 January 1983

STP36179S: Effects of Oxygen Precipitation on Minority Carrier Lifetime in Silicon Crystals - 01 January 1983

STP36180S: Defects and Carrier Lifetime in Silicon - 01 January 1983

STP36158S: Impurity Incorporation in Czochralski Silicon Grown for VLSI - 01 January 1983

STP36181S: Computer-Aided Process Modeling for Design and Process Control - 01 January 1983

STP36182S: Characterizing Process Nonuniformities on Large-Diameter Wafers: An Overview - 01 January 1983

STP36183S: Temperature-Dependent Infrared Characterization of Silicon Wafers - 01 January 1983

STP36184S: Analysis of Infrared Spectra for Oxygen Measurements in Silicon - 01 January 1983

STP36185S: Determination of Oxygen Concentration in Silicon by Infrared Absorption - 01 January 1983

STP36186S: Thickness Measurement of Thin (1.0-µm) Epitaxial Silicon Layers by Infrared Reflectance - 01 January 1983

STP36187S: Automated Detection of Wafer Surface Defects by Laser Scanning - 01 January 1983

STP36188S: Computerized Electron-Beam Linewidth Measuring and Inspection: A New Tool - 01 January 1983

STP36189S: Measurement of Ion Implantation Doses in Silicon by Ellipsometry and Spectral Reflectance - 01 January 1983

STP36159S: Dependence of Silicon Float-Zone Refining Parameters on Frequency - 01 January 1983

STP36156S: Silicon Crystal Growth and Processing Technology: A Review - 01 January 1983

STP36160S: Influence of Laser Marking on Silicon Wafer Properties - 01 January 1983

STP36161S: A Review of Optical Lithographic Techniques for VLSI - 01 January 1983

STP36194S: Deformation Inhomogeneities in Upset Forging - 01 January 1983

STP28389S: Hot Forming of Aluminum-Magnesium Alloy Sheet - 01 January 1982

STP753-EB: Formability of Metallic Materials—2000 A.D. - 01 January 1982

STP28390S: Application of Formability Assessment to Autobody Outer Panels - 01 January 1982

STP28391S: The Influence of Tooling Temperature on the Formability of Stainless Steel Sheets - 01 January 1982

STP28392S: Formability of INCOLOY Alloy MA 956: An Oxide Dispersion Strengthened Sheet Alloy - 01 January 1982

STP28393S: Fittability Analysis in Press Forming of Large-Sized Autobody Panels - 01 January 1982

STP28394S: Material Flow and Defect Formation in Forging an Airfoil Shape from Metal-Matrix Composites - 01 January 1982

STP28395S: The Use of Torsion Testing to Assess Material Formability - 01 January 1982

STP28385S: Effect of Aging on Bulk Formability of Aluminum Alloys - 01 January 1982

STP28396S: Upsetting Test for Determining Stress-Strain Curves in the Range of Very High Strains - 01 January 1982

STP28397S: Formability and Application of New Hot-Rolled High-Strength Sheet Steels - 01 January 1982

STP28398S: Formability of the Next Generation of High-Strength Low-Alloy Steels: The Effects of Low Temperatures and Processing Conditions - 01 January 1982

STP28399S: Computer-Aided Modeling of Selected Sheet Metal Forming Processes - 01 January 1982

STP28400S: A Method for the Determination of Ductility for Thin Metallic Materials - 01 January 1982

STP28401S: Formability Testing for Precision and Accuracy - 01 January 1982

STP28402S: Summary - 01 January 1982

STP28386S: Microstructure, Slip Distribution, and Strain Hardening in Aluminum Alloys - 01 January 1982

STP28384S: 4000 Years of Sheet Metal Forming - 01 January 1982

STP28387S: Formability Tests Contrasting Ferrous Materials and 2036-T4 Aluminum - 01 January 1982

STP28388S: Effects of Strain-Hardening Representation in Sheet Metal Forming Calculations of 2036-T4 Aluminum - 01 January 1982

STP37060S: Effect of Hydrogen on the Oxygen Embrittlement of Beta-Quenched Zircaloy-4 Fuel Cladding - 01 January 1982

STP37047S: Application of Hydrostatic Extrusion to Fabrication of Zircaloy Tubing - 01 January 1982

STP37048S: Beta-Quenching of Zircaloy Cladding Tubes in Intermediate or Final Size—Methods to Improve Corrosion and Mechanical Properties - 01 January 1982

STP37049S: New Intermetallic Compounds in Zircaloy-4 - 01 January 1982

STP28419S: Fabrication of Heavy-Wall Pressure Vessels - 01 January 1982

STP28421S: A Portable 100-kW Electron Beam Welding System for Pressure Vessel Fabrication - 01 January 1982

STP28451S: Manufacturing and Properties of Large Castings in 13Cr-1Ni Low-Carbon Steel (ASTM A217) - 01 January 1982

STP28436S: Electroslag Casting of Stainless Steel Valve Bodies - 01 January 1982

STP28884S: Strain Hardening and ‘Strain-Rate Hardening’ - 01 January 1982

STP34363S: Kinetics of Annealing of Irradiated Surveillance Pressure Vessel Steel - 01 January 1982

STP34380S: Annealing of Radiation Damaged Monazite - 01 January 1982

STP29409S: Chapter 5—Methods of Application - 01 January 1982

STP785-EB: Guide to the Selection and Use of Electroplated and Related Finishes - 01 January 1982

STP29410S: Chapter 6—Design for Electroplating - 01 January 1982

STP29411S: Chapter 7—Factors to be Considered in Choosing an Electroplated Coating - 01 January 1982

STP29412S: Chapter 8—Criteria of Choice - 01 January 1982

STP29405S: Chapter 1—Scope and Purpose - 01 January 1982

STP29413S: Chapter 9—Nature of the Basis Metal (Substrate) - 01 January 1982

STP29414S: Chapter 10—Related Finishes - 01 January 1982

STP29415S: Chapter 11—Properties of Coating Metals - 01 January 1982

STP29406S: Chapter 2—Purposes of Electroplating - 01 January 1982

STP29416S: Chapter 12—Tests for Compliance - 01 January 1982

STP29407S: Chapter 3—Metallic Finishes Available for Electroplating - 01 January 1982

STP29408S: Chapter 4—Advantages and Disadvantages of Electroplated Coatings - 01 January 1982

STP788-EB: Processing and Testing of Reaction Injection Molding Urethanes - 01 January 1982

STP28506S: Reinforced and Nonreinforced Reaction Injection Molding Machines for Production of Polyurethane Specimens for Material Development, Evaluation, and Quality Control - 01 January 1982

STP28507S: Equipment for Processing Microcellular Urethanes by the Reaction Injection Molding Process - 01 January 1982

STP28505S: Reaction Injection Molding Urethanes—Detroit and Beyond - 01 January 1982

STP28508S: Reaction Injection Molding Urethanes: Heat Sag Characteristics - 01 January 1982

STP28509S: Testing: Thermal Expansion of Reinforced and Nonreinforced Urethane Materials - 01 January 1982

STP28510S: A Comparison of Dynamically Determined Shear Modulus with Statically Determined Flexural Modulus for Reaction Injection Molding Urethanes - 01 January 1982

STP28511S: Practical Applications of Variable Rate Impact Testing of Reaction Injection Molding Urethanes - 01 January 1982

STP37002S: Development of Forging Processes for Large-Scale Deformation of Lithium Fluoride - 01 October 1981

STP37007S: Ultrafine Finishing of Ceramics and Metals by Float Polishing - 01 October 1981

STP37023S: The Use of Ion-Beam Deposited Diamond-Like Carbon for Improved Optical Elements for High Powered Lasers - 01 October 1981

STP37024S: Ion-Beam Deposited Ge-As-Se Glass For Applications in the 1μ to 16μ Wavelength Region - 01 October 1981

STP27347S: Chapter 3—Cleaning Methods - 01 January 1981

STP403A-EB: Cold Cleaning with Halogenated Solvents - 01 January 1981

STP27345S: Chapter 1—Applications and Limitations of Cold Cleaning - 01 January 1981

STP27348S: Chapter 4—General Discussion of Hazards - 01 January 1981

STP27349S: Chapter 5—Bulk Storage - 01 January 1981

STP27350S: Chapter 6—General Conclusions and Recommendations - 01 January 1981

STP27346S: Chapter 2—Solvents Used in Cold Cleaning - 01 January 1981

STP28055S: Explosion Bonding of Titanium and Zirconium - 01 January 1981

STP27686S: Rare-Earth Additions to Blast Furnace Iron for the Production of Large Castings - 01 January 1981

STP27688S: Titanium and Its Alloys for Use in Iron and Steelmaking - 01 January 1981

STP27689S: The Role and Use of Aluminum in Steel Production - 01 January 1981

STP27692S: Alloy Additions for the Production of Fine-Grain Strand-Cast Special-Quality Steel Billets - 01 January 1981

STP27683S: Control of Ferroalloys in a Large Integrated Steel Mill - 01 January 1981

STP33477S: Improving Composite Bolted Joint Efficiency by Laminate Tailoring - 01 January 1981

STP749-EB: Joining of Composite Materials - 01 January 1981

STP33472S: Further Developments in the Design and Analysis of Adhesive-Bonded Structural Joints - 01 January 1981

STP33475S: Static and Fatigue Strength of High Load Intensity Steel-Hybrid Composite Bonded Scarf Joints - 01 January 1981

STP27169S: Chapter 4—Fabrication Processes for Composite Materials and Structures - 01 January 1980

STP38208S: Toughness Properties of Vacuum Induction Melted High-Chromium Ferritic Stainless Steels - 01 January 1980

STP38212S: Effect of Cold-Working on Impact Transition Temperature of 409 and E-4 Stainless Steels - 01 January 1980

STP35817S: Mechanism of Fracture of Hard Rock Using a Drag Bit Assisted by Waterjets - 01 January 1979

STP35818S: CAVIJET Coal-cutting parameters - 01 January 1979

STP35819S: Marine Applications of High-Pressure Waterjets - 01 January 1979

STP35820S: Use of High-Pressure Waterjets in Utility Industry Applications - 01 January 1979

STP36879S: Effect of Heat Treatment and Microstructure on the Mechanical and Corrosion Properties of a Precipitation Hardenable Stainless Steel - 01 January 1979

STP36880S: Influence of Hydrogen on Age-Hardening Processes in 15-5 Precipitation Hardened Stainless Steel - 01 January 1979

STP36887S: Melting of Superalloys - 01 January 1979

STP36889S: Forging and Processing of High-Temperature Alloys - 01 January 1979

STP36890S: Review of Superalloy Powder Metallurgy Processing for Aircraft Gas Turbine Applications - 01 January 1979

STP36904S: Design, Fabrication, and Nondestructive Evaluation of an Advanced Composite Foil Test Component (Tapered Box Beam) - 01 January 1979

STP38355S: Effect of Small Additions of Niobium on the Welding Behavior of an Austenitic Stainless Steel - 01 January 1979

STP647-EB: Formability Topics—Metallic Materials - 01 July 1978

STP30048S: Stress-Peen Straightening of Complex Machined Aircraft Parts - 01 July 1978

STP30049S: Development of Forming Limit Curves for Aerospace Aluminum Alloys - 01 July 1978

STP30050S: High-Strength Steels—Formability and Applications - 01 July 1978

STP30051S: Use of Calcium in Inclusion Shape Control of High-Strength, Low-Alloy Steels Produced by the Direct Reduction-Electric Furnace Process Original experimental data were measured in U.S. customary units. - 01 July 1978

STP30052S: Relationship Between Microstructure and Formability in Two High-Strength, Low-Alloy Steels - 01 July 1978

STP30053S: Determination of Ductility for Bulk Deformation - 01 July 1978

STP30054S: Workability Testing and Analysis for Bulk Forming Processes - 01 July 1978

STP30055S: Relationship Between Surface Characteristics and Galling Index of Sheet Steel - 01 July 1978

STP30056S: Analysis of Sheet Metal Forming to Axisymmetric Shapes - 01 July 1978

STP30057S: Summary - 01 July 1978

STP30044S: Formability of Aluminum Alloys Using Cup Tests Original experimental data were measured in U.S. customary units. - 01 July 1978

STP30045S: Formability and Fracture of Some Higher Strength Aluminum Alloys - 01 July 1978

STP30043S: Formability Testing and Deformation Analysis of Steel Sheet - 01 July 1978

STP30046S: Bending and Springback of Aluminum Alloy Sheet and Plate - 01 July 1978

STP30047S: Predicting Sheet Anisotropy from the Fracture Angle of Tension Specimens - 01 July 1978

STP27106S: Welding of Railroad Rails—A Literature and Industry Survey - 01 January 1978

STP27101S: A Review of the Manufacture, Processing, and Use of Rail Steels in North America—A Report of AISI Technical Subcommittee on Rails and Accessories - 01 January 1978

STP33398S: Effect of Residual Stress from Welding on the Fatigue Strength of Notched 347 Austenitic Stainless Steel - 01 January 1978

STP620-EB: Gaskets: A Symposium - 01 January 1977

STP27940S: A Unique Concept in Gasket Technology for Reducing Vehicle Weight and Lowering Flange Design Costs - 01 January 1977

STP27941S: Performance Criteria of Gasket Materials - 01 January 1977

STP27938S: Tightening Process Equipment Gasketed Joints Safely - 01 January 1977

STP27942S: Testing Gasket Materials for Design Purposes - 01 January 1977

STP27943S: Sealability Characteristics of Gasket Materials - 01 January 1977

STP27944S: Formed-In-Place Gaskets: Concept vs Reality - 01 January 1977

STP27945S: ASTM Classification System for Gasket Materials and Its Use - 01 January 1977

STP27939S: The Relationship Between Bolt Load and Leak Rate in a Gasketed Joint - 01 January 1977

STP28001S: Fabrication - 01 January 1977

STP42535S: Handbook of Vapor Degreasing - 01 January 1976

STP310A-EB: Handbook of Vapor Degreasing - 01 January 1976

STP38064S: Annealing of Irradiation Damage in High-Copper Ferritic Steels - 01 January 1976

STP38065S: Displacement Spike Annealing in Iron at Reactor Temperatures - 01 January 1976

STP32268S: Metrication in the Contract Tooling and Machining Industry - 01 January 1975

STP29167S: Newly Developed Welding Material for Liquefied Natural Gas Application - 01 January 1975

STP36553S: Engineering and Manufacturing Development of a New Metric Fastener — 12-Spline Flange Bolt - 01 January 1975

STP32107S: Effect of Thermomechanical Processing and Heat Treatment on the Properties of Zr-3Nb-1Sn Strip and Tubing - 01 January 1974

STP38602S: Subcritical Crack Growth Under Single and Multiple Periodic Overloads in Cold-Rolled Steel - 01 January 1974

STP38591S: Effects of Shot-Peening Residual Stresses on the Fracture and Crack-Growth Properties of D6AC Steel - 01 January 1974

STP38592S: Fracture Properties of a Cold-Worked Mild Steel - 01 January 1974

STP32235S: Wear Characteristics of Modified Plasma-Deposited Aluminum Bronze - 01 January 1974

STP47413S: Improved Surface Preparation For Spreading Resistance Measurements on p-type Silicon - 01 January 1974

STP36500S: Mechanical Property Data on Hot-Extruded 304N and 316N Stainless Steel Pipe - 01 January 1973

STP34133S: Fabrication Processing - 01 January 1973

STP36528S: Considerations for Design Specifications and Testing of Low Temperature Cryogenic Equipment - 01 January 1973

STP538-EB: Cleaning Stainless Steel - 01 January 1973

STP41378S: New Molten Salt Systems for Cleaning Stainless Steels - 01 January 1973

STP41379S: Anodic Treatment Improves Surface Properties of Stainless Steel - 01 January 1973

STP41380S: Vibratory Cleaning, Descaling, and Deburring of Stainless Steel Parts - 01 January 1973

STP41381S: Extrude Hone Process and Its Applications to Stainless Steel Compounds - 01 January 1973

STP41382S: Pre-Service Cleaning Philosophy for Boiling Water Reactors - 01 January 1973

STP41383S: Cleaning Stainless Steel Heat Transport Systems for Liquid Metal Service - 01 January 1973

STP41385S: Cleaning of Fluid Systems and Associated Components During Construction Phase of Nuclear Power Plants - 01 January 1973

STP41370S: Alkaline Cleaning of Stainless Steel: An Overview - 01 January 1973

STP41386S: Cleanliness Requirements in the Chemical Industry - 01 January 1973

STP41387S: Design Principles and Operating Practices Affecting Clean-In-Place Procedures of Food Processing Equipment - 01 January 1973

STP41388S: Cleaning Heat Exchanger Tubing in Industry with the M.A.N. Automatic On-Load Tube Brushing System - 01 January 1973

STP41389S: Experiences with Cleaning Stainless Steel Condensers on Allegheny Power System Stations - 01 January 1973

STP41390S: Premature Failure of Type 316 Stainless Steel Condenser Tubing in Brackish Water - 01 January 1973

STP41391S: Improving Condenser Performance with Continuous In-Service Cleaning of Tubes - 01 January 1973

STP41371S: Cleaning Stainless Steel with Alkaline Solutions - 01 January 1973

STP41372S: Solvent Cleaners — Where and How to Use Them - 01 January 1973

STP41369S: Standard Recommended Practice for Cleaning and Descaling Stainless Steel Parts, Equipment, and Systems - 01 January 1973

STP41373S: Role of Organic Acids in Cleaning Stainless Steels - 01 January 1973

STP41374S: Selection of a Proper Vapor Degreasing Solvent - 01 January 1973

STP41375S: Stability of Trichlorotrifluoroethane — Stainless Steel Systems - 01 January 1973

STP41376S: Acid Cleaning of Stainless Steel - 01 January 1973

STP41377S: Passivation Treatments for Resulfurized, Free Machining Stainless Steels - 01 January 1973

STP34679S: Applications of Exoelectron Emission to Nondestructive Evaluation of Alloying, Crack Growth, Fatigue, Annealing, and Grinding Processes - 01 January 1972

STP47809S: Welding the Hy Steel - 01 January 1971

STP494-EB: Welding the HY Steels - 01 January 1971

STP26844S: Thermomechanical Processing and Fatigue of Aluminum Alloys - 01 January 1970

STP47365S: Introduction - 01 January 1969

STP455-EB: Gray, Ductile, and Malleable Iron Castings—Current Capabilities - 01 January 1969

STP47367S: Ductile Iron—Our Most Versatile Ferrous Casting Material - 01 January 1969

STP47366S: Gray Iron—A Unique Engineering Material - 01 January 1969

STP47368S: Malleable Iron - 01 January 1969

STP47369S: Field Testing of Components - 01 January 1969

STP47370S: High Factors of Safety or Usable Design Strengths - 01 January 1969

STP43823S: Texture Development and Phase Stability of 0.5Cu-0.5Mo Zirconium During Fabrication to Sheet Form - 01 January 1969

STP43826S: The Effect of Orientation of Hydride Precipitates on the Fracture Toughness of Cold-Rolled Zircaloy-2 and 2.5Nb Zirconium - 01 January 1969

STP43828S: The Effect of Neutron Irradiation and Cold Work on the Strain-Aging Behavior of Zircaloy-2 - 01 January 1969

STP43819S: Texture Changes Produced During Zircaloy-4 Tubing Fabrication: From Forged Billet to Finished Tubing - 01 January 1969

STP43820S: Texture Development and Texture Gradients in Zircaloy Tubing - 01 January 1969

STP46474S: Stress-Relief Embrittlement of High-Strength Quenched and Tempered Alloy Steels - 01 January 1968

STP431-EB: Adhesion, or Cold Welding, of Materials in Space Environments - 01 May 1967

STP45164S: 3-2 Cold Welding in Copper in an Ultra-High Vacuum - 01 May 1967

STP45158S: 2-1 The Problems of Engineering Testing for Coldwelding - 01 May 1967

STP48435S: Effects of Residual Elements on Cold Rolling and Finishing of Austenitic Stainless Steels - 01 January 1967

STP48436S: Residual Elements in Austenitic Stainless Steels—The Melt Shop Viewpoint - 01 January 1967

STP42045S: High Energy-Rate Forming of Fibrous Composites - 01 January 1967

STP42040S: Electroforming to Make Composite Materials - 01 January 1967

STP42043S: How Metal Matrix Composites Are Made - 01 January 1967

STP46419S: Transmission Electron Microscope Study of the Structures Produced During the First Stage of Tempering in a 1.40 Weight Per Cent Carbon Steel - 01 January 1966

STP44635S: Low-Temperature Annealing Processes in Alkali Halides - 01 January 1966

STP46193S: Cleaning Methods - 01 January 1966

STP403-EB: Cold Cleaning with Halogenated Solvents - 01 January 1966

STP46191S: Applications and Limitations of Cold Cleaning - 01 January 1966

STP46194S: General Discussion of Hazards - 01 January 1966

STP46195S: Bulk Storage - 01 January 1966

STP46196S: General Conclusions and Recommendations - 01 January 1966

STP46192S: Solvents Used in Cold Cleaning - 01 January 1966

STP48344S: Fatigue Tests of Unmachined, Mechanically Machined, and Chemically Machined Panels of Aluminum and Titanium Alloys - 01 January 1966

STP48346S: Roll Fatigue Tests of Forged ZK60A-T5 Magnesium and 2014-T6 Aluminum Wheels - 01 January 1966

STP369-EB: Advances in the Technology of Stainless Steels and Related Alloys - 01 January 1965

STP43740S: Modified Type 316 Stainless Steel with Low Tendency to form Sigma - 01 January 1965

STP43742S: New Cast High-Strength Alloy Grades by Structure Control - 01 January 1965

STP43743S: The Effect of Small Columbium Additions to Type 304 Stainless Steel - 01 January 1965

STP43726S: High-Strength Stainless Steel by Deformation at Low Temperatures - 01 January 1965

STP43744S: Effect of Heat Treatment and Welding on Corrosion Resistance of Austenitic Stainless Steels - 01 January 1965

STP43724S: Effects of Vacuum Melting and Vacuum Annealing on the Properties of Austenitic Stainless Steels - 01 January 1965

STP43747S: A Laboratory Test for Determining Susceptibility of Nickel-Molybdenum and Nickel-Molybdenum-Chromium Alloys to Intercrystalline Corrosion and Its Use in Development of Resistant Alloys - 01 January 1965

STP43749S: Relationship of Heat Treatment and Microstructure to Corrosion Resistance in Wrought Ni-Cr-Mo Alloys - 01 January 1965

STP43751S: Effect of Heat Treatment, Composition and Microstructure on Corrosion of 18 Cr-8Ni-Ti Stainless Steels in Acids - 01 January 1965

STP43727S: The Mechanisms of Deformation and Work Hardening in Aisi Type 301 Stainless Steel - 01 January 1965

STP43753S: Alloying Precipitation Hardening Stainless Steels for Strength and Stability - 01 January 1965

STP43755S: Further Studies on the Formation of Sigma in 12 to 16 per cent Chromium Steels - 01 January 1965

STP43728S: Practical Aspects of Production Bright Annealing of Stainless Steel - 01 January 1965

STP43756S: Development of a Modified Alloy 20 Stainless Steel - 01 January 1965

STP43757S: Relationship Between Metallurgical Structure and Properties of a Precipitation Hardening Stainless Steel - 01 January 1965

STP43758S: Aging Mechanisms in Precipitation-Hardening Stainless Steels - 01 January 1965

STP43729S: Advancements in Extrusion and Cold Finishing of Stainless Steel Irregular Shapes - 01 January 1965

STP43730S: New Martensitic Age Hardening Stainless Steels - 01 January 1965

STP43731S: The Development of New High-Strength Stainless Steels - 01 January 1965

STP43732S: Mechanical Properties and Corrosion Resistance of a High-Strength Chromium-Manganese-Nitrogen-Stainless Steel - 01 January 1965

STP43733S: Metallurgy of a Columbium-Hardened Nickel-Chromium-Iron Alloy - 01 January 1965

STP43734S: Properties of 12 Per Cent Chromium Alloys Modified with Small Columbium Additions - 01 January 1965

STP43735S: A High-Strength Weldable Stainless Steel for Elevated-Temperature Service - 01 January 1965

STP43725S: Effects of Austrolling on the Properties of Crucible 422 Stainless Steel - 01 January 1965

STP43736S: Creep-Rupture Properties of Stainless Steels at 1600, 1800, and 2000 F - 01 January 1965

STP47119S: The Effect of Solidification Practice on the Properties of High-Strength Steels - 01 January 1965

STP370-EB: Structure and Properties of Ultrahigh-Strength Steels - 01 January 1965

STP47120S: High-Strength Steel Forgings - 01 January 1965

STP47121S: Ausform Fabrication and Properties of High-Strength Alloy Steel - 01 January 1965

STP47122S: Thermomechanical Treatments Applied to Ultrahigh-Strength Bainites - 01 January 1965

STP47112S: Introduction - 01 January 1965

STP47113S: Relationships Between Microstructure and Toughness in Quenched and Tempered Ultrahlgh-Strength Steels - 01 January 1965

STP47116S: An Evaluation of the 18Ni-9Co-5Mo Maraging Steel Sheet - 01 January 1965

STP47117S: The Metallurgy and Properties of Cold-Rolled Am-350 and Am-355 Steels - 01 January 1965

STP44553S: Microscopical Techniques for the Study of Solid-State Polymerization - 01 January 1964

STP44581S: The Influence of Composition, Strain Hardening, and Precipitation Heat Treatment on the Mechanical Properties and Stress Corrosion Resistance of Copper-Beryllium Alloy Strip - 01 January 1964

STP319-EB: Papers on Soldering (1962) - 01 January 1963

STP44428S: Evaluation of Hoop Tension Tests as a Method of Screening Materials for Filament-Winding Application - 01 January 1963

STP45682S: Lubrication - 01 January 1963

STP45683S: Surface Texture in Relation to Adhesive Bonding - 01 January 1963

STP44485S: Methods of Evaluating Sonic Cleaning Systems - 01 January 1963

STP342-EB: Symposium on Cleaning and Materials Processing for Electronics and Space Apparatus - 01 January 1963

STP44487S: The Role of Cavitation in Sonic Energy Cleaning - 01 January 1963

STP44489S: Photography and Metal Parts Production - 01 January 1963

STP44490S: An Ionized Gas Jet Surface Cleaner - 01 January 1963

STP44492S: Doping of Germanium Transistor Surfaces by Fluid-Base Encapsulant Systems - 01 January 1963

STP44495S: Evaluation of Polycrystalline Silicon Batches for Czochralski Crystal Pulling - 01 January 1963

STP44499S: The Preparation and Properties of Single Crystals of Aluminum Antimonide - 01 January 1963

STP44474S: Portable Low-Cost Polyethylene Ultraclean Assembly Areas - 01 January 1963

STP45794S: Degreaser Operation - 01 January 1962

STP310-EB: Handbook of Vapor Degreasing - 01 January 1962

STP45790S: Process Description - 01 January 1962

STP45795S: General Hazards of Perchlorethylene and Trichlorethylene - 01 January 1962

STP45791S: Applications - 01 January 1962

STP45792S: Selection of a Vapor Degreasing Solvent - 01 January 1962

STP45793S: Vapor Degreasing Equipment - 01 January 1962

STP43680S: A Study of the Microstructure of Precipitation Hardening Stainless Steel Sheet - 01 January 1962

STP43681S: Slip Lines in a Precipitation-Hardened Nickel-Base Alloy - 01 January 1962

STP43684S: Effect of Surface Finishing on Development of θ' Phase in an Aluminum - 4 Per Cent Copper Alloy - 01 January 1962

STP46007S: Manufacture of Typing Wheels and Other Electroformed Piece Parts - 01 January 1962

STP318-EB: Symposium on Electroforming—Applications, Uses, and Properties of Electroformed Metals - 01 January 1962

STP46008S: Alloy Electroforming for High-Temperature Aerospace Applications - 01 January 1962

STP46001S: Modern Electroforming Solutions and Their Applications - 01 January 1962

STP46009S: Electroforming Hardware for Aerospace Vehicles - 01 January 1962

STP46010S: Electroforming for Aviation and Aerospace Applications at Bart Manufacturing Corp. - 01 January 1962

STP46011S: Electroforming Supersonic Pitot-Static Tubes - 01 January 1962

STP46012S: Electroforming of Venturi-Type Nozzles for Wind Tunnels and Other Applications - 01 January 1962

STP46013S: Historical Reflections on Electroforming - 01 January 1962

STP46014S: Replica Epoxy Molds - 01 January 1962

STP46015S: Electroforming: Current and Future Requirements of Our Aerospace Industry - 01 January 1962

STP46000S: An Introduction to Electroforming - 01 January 1962

STP46002S: Physical and Mechanical Properties of Electroformed Nickel at Elevated and Subzero Temperatures - 01 January 1962

STP46003S: Physical and Mechanical Properties of Electroformed Copper - 01 January 1962

STP46004S: Practical Methods in the Use of Masters, Mandrels, and Matrices - 01 January 1962

STP46005S: Application of Electroforming to the Manufacture of Disk Records - 01 January 1962

STP46006S: Electroforming Plastic Molds for the Automotive Industry - 01 January 1962

STP48116S: The Microstructure of Bronze Sinterings - 01 January 1962

STP323-EB: The Microstructure of Bronze Sinterings - 01 January 1962

STP46395S: Introduction - 01 January 1962

STP41229S: Elimination of Contaminants from Electron Tube Components: Automation of Chemical Processing - 01 January 1961

STP300-EB: Materials and Electron Device Processing - 01 January 1961

STP41230S: Transducer Parameters Affecting Sonic Cleaning - 01 January 1961

STP41236S: Sulfamic Acid Cleaning of Electron Tube Parts - 01 January 1961

STP41238S: Purification, Distribution, Control, and Monitoring of High-Purity Gases for Electron Device Processing - 01 January 1961

STP41242S: Mass Spectrometric Studies of Power Klystron Exhaust Processing - 01 January 1961

STP41245S: Changes in Stability of Germanium Alloy Transistors Through Etching, Washing, and Encapsulation Processing - 01 January 1961

STP41246S: Effects of Various Cleaning Methods on Electronic Components in the Micromodule - 01 January 1961

STP46336S: Columbium and Tantalum Fabrication - 01 January 1960

STP46338S: Review—The Fabrication of Tungsten - 01 January 1960

STP45926S: Production Methods of Cold Working Joints Subjected to Fretting for Improvement of Fatigue Strength - 01 January 1960

STP90E-EB: 1960 Supplement to the Metal Cleaning Bibliographical Abstracts - 01 January 1960

STP48314S: Properties of Cast Iron at Elevated Temperatures - 01 March 1959

STP248-EB: Report on Properties of Cast Iron at Elevated Temperatures - 01 March 1959

STP45763S: Fatigue Testing of Airframe Structural Components - 01 January 1958

STP47095S: Welded 18 Cr, 8 Ni + Mo Stainless Steel - 01 January 1958

STP226-EB: The Elevated-Temperature Properties of Weld-Deposited Metal and Weldments - 01 January 1958

STP47096S: Welded 18 Cr, 8 Ni + Mo, Cb Stainless Steel - 01 January 1958

STP47097S: Welded 25 Cr, 12 Ni and 27 Cr, 9 Ni Stainless Steels - 01 January 1958

STP47098S: Welded 25 Cr, 20 Ni Stainless Steels - 01 January 1958

STP47099S: Welded 15 Cr, 35 Ni Stainless Steels - 01 January 1958

STP47100S: Welded 17-4 PH and 17-7 PH Alloys - 01 January 1958

STP47101S: Welded Inconel Alloys - 01 January 1958

STP47102S: Welded 10 Cr, 50 Ni + Cb, Ta Alloy - 01 January 1958

STP47103S: Welded 19-9 DL Type Alloys - 01 January 1958

STP47104S: Welded 15-15 N Alloy Weld Metal - 01 January 1958

STP47105S: Welded 17-14 Cu Mo Alloy - 01 January 1958

STP47106S: Welded A-286 Alloy - 01 January 1958

STP47080S: Introduction - 01 January 1958

STP47107S: Welded N-155 Alloy - 01 January 1958

STP47108S: Welded S-816, S-590 and S-588 Alloys - 01 January 1958

STP47109S: Welded Inconel W and Inconel X Sheet - 01 January 1958

STP47110S: Welded Hastelloy C, Hastelloy X, HS-25, HS-30, HS-31 and 16-25-6 Alloys - 01 January 1958

STP47082S: Welded 0.5 Mo and 1 Mo Steels - 01 January 1958

STP47083S: Welded 1 Cr, 0.5 Mo Steel - 01 January 1958

STP47084S: Welded 1 Cr, 1 Mo + V Steel - 01 January 1958

STP47085S: Welded 1.25 Cr, 0.5 Mo, 0.25 V Steel - 01 January 1958

STP47086S: Welded 2 Cr, 0.5 Mo Steel - 01 January 1958

STP47087S: Welded 2.25 Cr, 1 Mo Steel - 01 January 1958

STP47088S: 3 Cr, 1 Mo Weld Metal - 01 January 1958

STP47081S: Welded Carbon Steel - 01 January 1958

STP47089S: Welded 5 Cr, 0.5 Mo and 5 Cr, 0.5 Mo + Cb Steels - 01 January 1958

STP47090S: 7 Cr, 0.5 Mo and 9 Cr, 1 Mo Weld Metal - 01 January 1958

STP47091S: 18 Cr, 8 Ni Stainless Steel - 01 January 1958

STP47092S: Welded 18 Cr, 8 Ni Stainless Steel Sheet - 01 January 1958

STP47093S: Welded 18 Cr, 8 Ni + Ti Stainless Steel - 01 January 1958

STP47094S: Welded 18 Cr, 8 Ni + Cb Stainless Steel - 01 January 1958

STP39529S: Vibratory Polishing of Metallographic Specimens for Optical and Electron Microscopy - 01 January 1958

STP39534S: An Electron Metallographic Study of the Precipitation-Hardening Process in Commercial Nickel-Base Alloys - 01 January 1958

STP44115S: Dip-Soldered Printed Circuit Joint Characteristics - 01 January 1957

STP44105S: Ultrasonic Soldering of Aluminum - 01 January 1957

STP44106S: Dip Soldering Printed Circuits - 01 January 1957

STP44107S: Soldering in Semiconductor Devices - 01 January 1957

STP44109S: Corrosive Fluxes—Their Role in Soldering - 01 January 1957

STP44104S: Solders, Fluxes, and Techniques for Soldering Aluminum - 01 January 1957

STP44113S: A Method for Testing and Evaluating the Joint Properties of a Copper Liner Soldered in an Aluminum Casting - 01 January 1957

STP46859S: The Standard Salt-Spray Test—Is it a Valid Acceptance Test? - 01 January 1957

STP197-EB: Symposium on Properties, Tests, and Performance of Electrodeposited Metallic Coatings - 01 January 1957

STP46850S: Introductory Remarks - 01 January 1957

STP46853S: Evaluation of Methods Available for Measurement of Surface Luster of Electroplated Coatings - 01 January 1957

STP46854S: Recommended Practices for Cleaning Prior to Electroplating - 01 January 1957

STP46851S: History of ASTM Committee B-8 - 01 January 1957

STP46855S: A Comparison of the Corrosion Behavior and Protective Value of Electrodeposited Zinc and Cadmium Coatings on Steel - 01 January 1957

STP46856S: Evaluation of Phosphate Coating over Electrodeposited Zinc - 01 January 1957

STP46852S: The Corrosion Behavior and Protective Value of Copper-Nickel-Chromium and Nickel-Chromium Coatings on Steel - 01 January 1957

STP46857S: Evaluation of Testing Methods for Supplementary Coatings - 01 January 1957

STP46858S: Atmospheric Exposure of Electroplated Lead Coatings on Steel - 01 January 1957

STP46294S: Fatigue Testing of Airframe Structural Components - 01 January 1957

STP44155S: Properties and Fabrication Characteristics of Wrought Titanium Products - 01 January 1957

STP90D-EB: 1957 Supplement to the Metal Cleaning Bibliographical Abstracts - 01 January 1957

STP48209S: 1957 Supplement to the Metal Cleaning Bibliographical Abstracts - 01 January 1957

STP47738S: Killed Carbon Steel (0.12 to 0.17 C ) - 01 January 1955

STP47739S: Killed Carbon Steel (0.18 to 0.24 C) - 01 January 1955

STP47742S: Killed Carbon Steel (0.27 to 0.58 C) - 01 January 1955

STP47743S: Aluminum Killed Steel - 01 January 1955

STP47744S: Open Steel (Rimmed or Capped) - 01 January 1955

STP47977S: Effect of Temperature on the Electrical Resistivity of Several Ceramic and Silicone-Type Coatings - 01 January 1954

STP153-EB: Symposium on Porcelain Enamels and Ceramic Coatings as Engineering Materials - 01 January 1954

STP47978S: A Laboratory Evaluation of Ceramic Coatings for High Temperature Applications - 01 January 1954

STP47966S: Resistance of Porcelain Enamels to Weathering - 01 January 1954

STP47979S: Guideposts in Selecting Porcelain Enamels and Ceramic Coatings—A Summary - 01 January 1954

STP47967S: The Chemical Resistance of Glass Fused to Steel - 01 January 1954

STP47964S: Introduction - 01 January 1954

STP47968S: Acid Resisting Properties of Porcelain Enamels - 01 January 1954

STP47969S: Requirements for and Expected Benefits from the Application of Coatings to High-Temperature Components of a Jet Engine - 01 January 1954

STP47965S: Some Examples of the Functional Use of Porcelain Enamel and Ceramic Coatings for Steel - 01 January 1954

STP47970S: High-Temperature Ceramic Coatings as Applied to Aircraft Power Plants - 01 January 1954

STP47971S: The Industrial Processing of High-Temperature Ceramic Coatings - 01 January 1954

STP47972S: The Abrasion Resistance of Various Types of Porcelain Enamel - 01 January 1954

STP47973S: The Resistance of Porcelain Enamels to Surface Abrasion as Determined by the PEI Test - 01 January 1954

STP47974S: Torsion Testing as an Aid to the Porcelain Enamel Industry - 01 January 1954

STP47975S: The Strengthening Effect of Porcelain Enamel on Sheet Iron as Indicated by Bending Tests - 01 January 1954

STP47976S: Tension Tests of Porcelain Enameled Steel - 01 January 1954

STP90C-EB: 1954 Supplement to the Metal Cleaning Bibliographical Abstracts - 01 January 1954

STP90B-EB: Metal Cleaning Bibliographical Abstracts 1842 – 1951 - 01 March 1953

STP47700S: Weathering of Some Organic Coatings - 01 January 1953

STP140-EB: Symposium on Testing Metal Powders and Metal Powder Products - 01 January 1953

STP44037S: Quality Control of Metal Powder Gears - 01 January 1953

STP44038S: Porous Stainless Steel Compacts for Transpiration Cooling - 01 January 1953

STP44036S: Test Methods and Devices for Sintered Iron Rotating Bands - 01 January 1953

STP44040S: Metal Powder Size Distribution with the Roller Air Analyzer - 01 January 1953

STP44041S: Metal Powder Particle Size Determination - 01 January 1953

STP44042S: Some Experiences in Specific Surface Measurement of Metal Powders By Low-Temperature Gas Adsorption - 01 January 1953

STP44046S: The Production and Uses of Tin Coatings - 01 January 1953

STP46764S: A Metal Cleaning Test Using Radioactive Stearic Acid as Soil - 01 January 1952

STP43993S: Fabrication Techniques for Structural Sandwich Constructions - 01 January 1952

STP46807S: Inspection, Processing, and Manufacturing Control of Metals by Ultrasonic Methods - 01 January 1951

STP46809S: Ultrasonics in the Heavy Forging Industry - 01 January 1951

STP46810S: The Application of Ultrasonics to the Fabrication of Aluminum - 01 January 1951

STP46722S: Forming Parameters and Criteria for Design and Production - 01 January 1950

STP47328S: Data on Corrosion- and Heat-Resistant Steels and Alloys—Wrought and Cast - 01 January 1950

STP47330S: Section B—Wrought Chromium-Nickel Steels - 01 January 1950

STP47331S: Cast Chromium and Chromium-Nickel Steels - 01 January 1950

STP47332S: Section A.—Cast Corrosion-Resistant Alloys - 01 January 1950

STP47329S: Section A—Wrought Chromium Steels - 01 January 1950

STP47333S: Section B.—Cast Heat-Resistant Alloys - 01 January 1950

STP90A-EB: 1950 Supplement to the Metal Cleaning Bibliographical Abstracts - 01 January 1950

STP48186S: 1950 Supplement to the Metal Cleaning Bibliographical Abstracts - 01 January 1950

STP48074S: Some Strain Gage Studies of Cast Iron Punch Press Frames - 01 January 1950

STP47310S: Gear Lubricants Used in Steel Plants - 01 January 1949

STP43925S: The Effect of Pressure on the Properties of Compacts - 01 January 1943

STP55-EB: Symposium on Powder Metallurgy - 01 January 1943

STP43924S: The Fundamentals Necessary to Apply Powder Metallurgy - 01 January 1943

STP43926S: The Influence of Homogenization Upon the Physical Properties of Copper-Nickel Powder Alloys - 01 January 1943

STP43927S: The Effect of Particle Size on the Shrinkage of Metal Compacts - 01 January 1943

STP43928S: Alloy Powders - 01 January 1943

STP43929S: Metal Powder Friction Materials - 01 January 1943

STP43930S: The Hot Pressing of Metal Powders - 01 January 1943

STP538-EB: Cleaning Stainless Steel - 01 January 1937

STP41384S: Theoretical Analysis of Sodium Removal from Fast Flux Test Facility Fuel Subassemblies - 01 January 1937

STP46880S: Symposium on Pearlitic Malleable Cast Iron - 01 January 1936

STP25-EB: Symposium on Pearlitic Malleable Cast Iron - 01 January 1936

STP43867S: Engineering Requirements and Trends for Metals in the Non-Ferrous Roasting, Smelting and Refining Industry - 01 January 1932

STP47547S: Gamma-Ray Testing of Welds - 01 January 1931

STP11-EB: Symposium on Welding - 01 January 1931

STP47548S: Magnetic Methods of Testing Butt Welds - 01 January 1931

STP47549S: Fatigue and Impact Testing of Welded Products - 01 January 1931

STP47550S: Welding Inspection - 01 January 1931

STP47541S: Welding Processes Applicable to Aluminum - 01 January 1931

STP47542S: The Quality of Materials for Fusion Welding - 01 January 1931

STP47543S: Modern Applications of Arc Welding - 01 January 1931

STP47544S: Recent Developments in Gas Welding and Cutting - 01 January 1931

STP47540S: General Survey of Welding Processes - 01 January 1931

STP47545S: Stethoscopic Examination of Welded Products - 01 January 1931

STP47546S: Inspection of Welding Made by the Watertown Arsenal - 01 January 1931