All Manufacturing Journal Papers

Search within Manufacturing

JTE20180081: Analysis of Phase Transformation and Mechanical Properties of 55CrMo Steel during Induction Hardening - 01 January 2021

JTE20180043: Tribological Properties of Chemical Vapor Deposited Diamond Film on YT14 Cemented Carbide under Water Lubrication Condition - 01 November 2020

JTE20180069: Forming Limit Diagram Prediction of AISI 304–St 12 Tailor Welded Blanks Using GTN Damage Model - 01 November 2020

JTE20180247: Experimental and Numerical Investigation of Residual Stress in Coatings on Steel - 01 November 2020

JTE20180302: Discrimination and Prediction of Tool Wear State Based on Gray Theory - 01 November 2020

JTE20180007: The Effect of Aging and Burnishing Treatment on Parts Joined by Friction Stir Welding - 01 September 2020

JTE20180106: Testing and Performance Evaluation of Vegetable-Oil–Based Hybrid Nano Cutting Fluids - 01 September 2020

JTE20180236: Self-Sharpening of Tools with Unilateral Braze Coating Fabricated Using WC- and Ni-Based Alloys - 01 September 2020

JTE20180330: Cutting Performance of Luffa Cylindrica Fiber–Reinforced Composite by Abrasive Water Jet - 01 September 2020

JTE20170560: Mechanical and Wear Properties of Aluminum-Based Nanocomposites Fabricated through Ultrasonic Assisted Stir Casting - 01 July 2020

JTE20170791: Design, Development, and Calibration of Octagonal Ring Type Dynamometer with FEA for Measurement of Drilling Thrust and Torque - 01 July 2020

JTE20180036: A Novel Method for Evaluating Biaxial Stresses by Ultrasonic Critical Refracted Longitudinal Waves - 01 July 2020

JTE20180130: Surface Behavior of AISI H13 Alloy Steel Machining under Environmentally Friendly Cryogenic MQL with PVD-Coated Tool - 01 July 2020

JTE20180216: Microdrilling of AA (6351)-SiC-B4C Composite Using Hybrid Micro-ECDM Process - 01 July 2020

JTE20170660: Experimental Study of Nonpolar Surfactant Mixed with Dielectric Fluid on Die-Sinking EDM of Ti-6Al-4V Alloy - 01 March 2020

JTE20170086: Multiphase Gas Blow Forming of AA2017 - 01 March 2019

JTE20170426: Characterization of Vegetable Oil–Based Nanocutting Fluids - 01 March 2019

MPC20180119: Energy-Based Water Droplet Impact Erosion Studies of Laser-Treated Austenitic and Martensitic Steels and their Applications - 13 December 2018

MPC20180042: Quenchant Cooling Curves, Rewetting, and Surface Heat Flux Properties of Vegetable Oils - 05 December 2018

MPC20180070: Comparison between Quench Tempering and Quasi Quench Partitioning Treatment on Structure and Mechanical Properties of Cr-Mo Steel - 02 November 2018

JTE20160504: Pulsed Eddy Current Applied to Measure Residual Stress in Welding - 01 November 2018

JTE20160553: Advanced Method for Quantifying Socket Roughness and Empirical Correlations - 01 November 2018

JTE20170083: Relationship Between Machinability, Microstructure, and Mechanical Properties of Al-7Si Alloy - 01 November 2018

JTE20170198: Response Surface Methodology for the Remaining Creep Life Estimation by the Small Punch Creep Test - 01 November 2018

JTE20170218: Characteristic Analysis of Welding Crack Acoustic Emission Signals Using Synchrosqueezed Wavelet Transform - 01 November 2018

JTE20170318: Kinematic Errors on a C-Type Gear with a Parabolic Surface - 01 November 2018

MPC20180051: Study on Blade Curving Caused by Quenching of the Japanese Sword - 29 October 2018

MPC20170150: Fatigue and Corrosion Fatigue Properties of Additive-Manufactured Nickel Alloy 625 and Ti-6Al-4V - 26 October 2018

MPC20180031: Revisiting the Temperature Gradient Method - 16 October 2018

MPC20180030: Mathematical Modeling of the Thermal Response of Laboratory-Scale Probes - 09 October 2018

MPC20180016: Modified Prototypes of Rotary Arm–Type Test System Using a Small Ball Probe for Determination of Cooling Characteristics of Quenchants - 09 October 2018

MPC20180028: Evolution from Cooling Modeling to Cooling Engineering of the Steel Quenching Process: A Technology Overview - 09 October 2018

MPC20180020: Distortion Prediction in Quenching Seamless Pipes of Low-Carbon Steel - 01 October 2018

MPC20180053: An Experimental Study and Parameters Optimization on Duplex Turning of Titanium Alloy - 24 September 2018

MPC20180094: Grain Refinement of P91 Steel Using Double Austenitization Treatment - 24 September 2018

MPC20170159: Distortion-Free Heat Treatment of Thin Rods in Magnetic Field - 24 September 2018

MPC20180040: Mathematical Modeling and Computer Simulation of Steel Quenching - 18 September 2018

MPC20180019: Optimization Based on Orthogonal Experiment Design and Numerical Simulation for Carburizing Quenching Process of Helical Gear - 10 September 2018

MPC20170170: Phenomena of Physics Taking Place During Hardening of Steel Parts in Liquid Media That Can Be Investigated by Liščić/Petrofer Probe - 10 September 2018

MPC20180022: A Study on the Effect of Austempering Temperature on Microstructure and Mechanical Properties of DIN 36CrNiMo4 Carbide-Free Nano Bainitic Steel - 10 September 2018

MPC20180002: Two New Factors Having Influence on Surface Cooling Rate of Quenched Workpiece - 10 September 2018

JTE20160315: Postweld Heat Treatment Characterization of Mild Steel (E6013) Welded Areas Using Wavelet Transform of Ultrasonic Testing Signals - 01 September 2018

JTE20170045: Effect of Impact Energy in the Esso Test (Part 1: Basic Experiments and Validation of FEM Analysis) - 01 September 2018

JTE20170130: Exact Analytical Durometer Hardness Scale Interconversion - 01 September 2018

JTE20170137: Effect of Silver Addition on Mechanical Properties and Stress Corrosion Cracking in a Predeformed and Overaged 7055 Aluminum Alloy - 01 September 2018

JTE20160541: Seal Strength Evaluation of Flexible Plastic Films by Machine Testing and Human Peeling - 01 July 2018

JTE20170140: Effects of Process Parameters on the Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting - 01 July 2018

JTE20170345: Studying the Statistics of Natural X-ray Pictures - 01 July 2018

MPC20170093: An Investigation into the Reverse Transformation Mechanisms in the Heat Treatment of Austenitic Stainless Steel - 14 June 2018

MPC20170111: Reliable Residual Stress Analysis for Thin Metal Sheets by Incremental Hole Drilling - 14 June 2018

MPC20170133: Residual Stress Field of a Single Edge Notch Specimen after Laser Shock Peening and Shot Peening Treatment - 12 June 2018

MPC20170079: Study on the Role of Casting Defects and Surface Finish on Fatigue Life in Die-cast AM60B Magnesium Alloy Using X-Ray Computed Tomography - 12 June 2018

MPC20170089: Coupling Computation between Weld Mechanics and Arc Plasma Process for Residual Stress Analysis - 12 June 2018

MPC20170108: Residual Stress Modification and Mechanisms of Bearing Steel with Different Microstructures during Water-Jet Cavitation Peening - 07 June 2018

MPC20170083: Effect of Microstructural Characteristics of Thick Steel Plates on Residual Stress Formation and Cracking during Flame Cutting - 07 June 2018

ACEM20170119: Material Selection: Balancing Sustainability and Resilience - 09 May 2018

MPC20170063: Experimental Study of Jet Cavitation Erosion Applicable to Oil and Water-Hydraulic Equipment - 08 May 2018

JTE20160490: Correlation Between Machinability and Chip Morphology of Austempered Ductile Iron - 01 May 2018

JTE20160549: Analysis and Prediction for Time Series on Torque Friction of Rolling Bearings - 01 May 2018

JTE20160557: Design and Dynamic Force Verification of Instrumented Charpy Strikers for the Tinius Olsen Pendulum Impact Tester - 01 May 2018

JTE20160651: Accuracy of Heat-Release Rate Measured in Microscale Combustion Calorimetry - 01 May 2018

MPC20170110: Two-Dimensional Residual Stress Mapping of Multilayer LTT Weld Joints Using the Contour Method - 30 April 2018

MPC20170143: Thermo-Mechanical Analysis of Activated Tungsten Inert Gas Welding (A-TIG) of Type 316LN Stainless Steel Thin Plates - 16 April 2018

MPC20170058: Effect of Nitriding on Antibacterial Performance of 8Cr17 and 4Cr13 Martensitic Stainless Steel - 09 March 2018

JTE20150083: Evaluation of Fracture Tearing Resistance of Dissimilar Metal Welds in Laser Welded Thin Steel Sheets - 01 March 2018

JTE20160054: Mini Round-Robin Test on the Split Hopkinson Pressure Bar - 01 March 2018

JTE20160307: Effect of Aluminum Content on Interfacial Reaction of Directionally Solidified TiAl Alloys - 01 March 2018

MPC20170056: Development of Processing Map and Constitutive Relationship for Thermomechanical Processing of Aluminum Alloy AA2014 - 06 February 2018

MPC20170022: Experimental Investigations on Welding and Mechanical Characteristics of Sintered-Forged Plain Carbon Steel under Autogenous TIG Welding - 06 February 2018

JTE20160072: On the Mechanical Behavior of Granite Material With Particular Emphasis on the Influence From Pre-Existing Cracks and Defects - 01 January 2018

JTE20160263: Laboratory Investigations of Cold Mix Asphalt for Cold Region Applications - 01 January 2018

JTE20160502: Application of Nonlinear Ultrasonic Technique to Characterize the Damage Evolution in Structural Steel after Tensile Deformation - 01 January 2018

JTE20170185: Design and Fabrication of Jominy End-Quench Testing Machine: Hardenability Evaluation of AISI-8620 Case-Hardening Steel - 01 January 2018

MPC20170052: A Design Optimization of the High Pressure Die Casting Process for the Fabrication of Bulk Metal Matrix Composites - 12 December 2017

MPC20170069: Mechanical Properties and Microstructure of Starch and Sisal Fiber Biocomposite Modified with Epoxy Resin - 08 December 2017

MPC20170023: Cavitation in Rolling Contact Bearings - 01 December 2017

GTJ20160157: Implementation of a Pretensioned, Fully Bonded Bolting System and Its Failure Mechanism Based on Acoustic Emission: A Laboratorial and Field Study - 01 November 2017

JTE20160048: Experimental Research on the Influence of an Empty-Hole Defect on Crack Connections Between a Directionally Fractured Blast Hole - 01 November 2017

JTE20160385: Stress Concentration Factors for ASTM E8/E8M-15a Plate-Type Specimens for Tension Testing - 01 November 2017

JTE20160461: Structural Dynamics Modification of Vibration-Test Fixture - 01 November 2017

MPC20160126: Development and Use of a Small Laboratory Intensive Quenching (IQ) System - 27 October 2017

MPC20170008: Solution of 2-D Inverse Heat Conduction Problem with Graphic Accelerator - 27 October 2017

MPC20170024: Hole Surface Formation Mechanism of Al2O3 Ceramic Based on Sintering Diamond Bits - 27 October 2017

MPC20160115: The Paths of Small Fatigue Cracks in High-Strength Steels Initiated from Inclusions and Small Defects - 19 October 2017

MPC20170006: An Evaluation of ASTM D6200 - 19 October 2017

MPC20170036: Metallurgical Analysis of Inconel 625 Metallic Gaskets Produced by Centrifugal Casting - 17 October 2017

MPC20170030: Mechanical and Microstructural Characterization of Forged Inconel 625 Ring Gaskets for Oil and Gas Application - 16 October 2017

MPC20170007: Failure Analysis of an Arresting Hook Point Shank - 06 October 2017

MPC20160125: Uphill Quenching of Aluminum Alloys - 05 October 2017

MPC20170002: Assessment of Spatiotemporal Heat Flux during Quenching in TiO2 and AlN Nanofluids - 03 October 2017

MPC20170020: Silica-Based Coatings for Corrosion Protection of AA7075 Aluminum Alloy - 27 September 2017

MPC20160070: Corrosion Behavior of High and Low Temperature Austempered Ductile Iron (ADI) in Iron Ore Slurry - 26 September 2017

MPC20170029: Synthesis and Comparative Study on Intergranular Corrosion Characteristics of Stabilized 5A Grade Cast Duplex Stainless Steel - 19 September 2017

MPC20170013: Influence of Steel Substrate on the Properties of PACVD Gradient Multilayer TiCN Coating - 19 September 2017

MPC20160111: Liquid-Metal Embrittlement Cracking in a Nickel-Based WeldOverlayed Boiler Tube - 14 September 2017

JTE20150399: Simple Method of Using Strain Gages to Estimate Stress Fields Near a Notch in Structures Subject to Large Deflections - 01 September 2017

JTE20150525: Effects of Fabrication Technique on Tensile Properties of Fiber Reinforced Polymer - 01 September 2017

JTE20160366: Development of Cuttability Abacuses in Abrasive Waterjet Cutting With Regard to Depth of Cut and Roughness of Cut Surfaces - 01 September 2017

MPC20160077: Kinetics of the Formation of Boride Layers on EN-GJL-250 Gray Cast Iron - 29 August 2017

JTE20150040: Dynamic Behavior of Fiber-Reinforced-Polymer-Strengthened Grinding Wheels Subjected to Pendulum Impact - 01 July 2017

JTE20150360: High Performance Ultrasonic Buffer Rods With Novel Structure for Polymer Process Monitoring - 01 July 2017

JTE20160045: Fabrication and Characterization of a Radial Ultrasonic Transducer - 01 July 2017

JTE20160067: Complex Stress-Strain Relations of Tubular Materials Studied With a Flexible Hydroforming System - 01 July 2017

MPC20150054: High-Temperature Mechanical Properties of P91 Weld Metal - 13 June 2017

MPC20160112: Vegetable Oils as Metal Quenchants: A Comprehensive Review - 13 June 2017

MPC20160039: Anisotropic Nature of Raw, Radially Strained, and Radially Strained and Aged Steel Tubes - 26 May 2017

MPC20160026: Metallurgical Nature of the As-Cast Microstructure of High-Nitrogen, High-Manganese Stainless Steels - 26 May 2017

MPC20160030: A Review on the Role of Microstructural Heterogeneities in the Failure of Aerospace Components: A Metallographer’s Perspective - 26 May 2017

MPC20160031: Investigation of the Origin of Coarse-Grained Bainite in X70 Pipeline Steels by EBSD Technique - 26 May 2017

MPC20160035: Structural Investigation and Control of Multi-Pass Gas-Shielded Flux-Cored Arc Weldments - 26 May 2017

MPC20160038: Heat-Affected Zone Formation in Electrospark-Deposition Additive Manufacturing on Ultrahigh-Strength Steel - 26 May 2017

MPC20160060: A Multianalytical Approach for the Study on Manufacturing Process in Ancient Bronze Coffin From Luristan, Western Iran - 26 May 2017

MPC20160065: Strain-Induced Martensite Detection Methods in Cold-Rolled Duplex Stainless Steels - 26 May 2017

MPC20160043: Microstructure Analysis of Segmented Chips of Super Duplex Stainless Steel Sandvik SAF 2507™ Using Electron Microscopy Techniques - 26 May 2017

MPC20160066: The History of Metallography at Lehigh University - 26 May 2017

MPC20160083: Characterization of Thermochemically Surface-Hardened Titanium by Light Optical Microscopy - 26 May 2017

MPC20160036: Identification of Intermetallic Phases in an Automotive Grade Aluminum A319 Alloy - 26 May 2017

MPC20160088: 475°C Embrittlement of Duplex Stainless Steel—A Comprehensive Microstructure Characterization Study - 26 May 2017

MPC20160059: Anisotropy in Residual Stress Measurements in Aluminum Alloys Used in the Aerospace Industry - 26 May 2017

MPC20160012: Analysis of the Textured Surface of Tangential Turn-Milling - 24 May 2017

MPC20160027: Maskless Electrochemical Texturing of Automotive Cylinders - 24 May 2017

MPC20160013: Tribological Behavior of Oil-Lubricated Laser Textured Steel Surfaces in Conformal Flat and Non-Conformal Contacts - 24 May 2017

MPC20160020: Improved Tribological Behavior of Grey Cast Iron Under Low and High Viscous Lubricants by Laser Surface Texturing - 24 May 2017

MPC20160024: Influence of Different Micro-Imprints to Fatigue Life of Components - 24 May 2017

JTE20150245: Profile Analysis for a Gear With Conical Teeth - 01 May 2017

JTE20150319: Preparation and Performance Test of Soldered Stators of Ultrasonic Motor - 01 May 2017

JTE20150427: The Material Dispatching Method for Conveyor System in 450 mm Wafer Fabrication - 01 May 2017

JTE20150479: Analysis on the Issues in ISO 6892-1 and TENSTAND WP4 Report Based on the Data of Confirm Tests by 21 Laboratories - 01 May 2017

JTE20160526: Discussion on “Analysis on the Issues in ISO 6892-1 and TENSTAND WP4 Report Based on the Data of Confirm Tests by 21 Laboratories” – A Refutation of International Tensile Testing Experts - 01 May 2017

JTE20160620: Response to Discussion on “Analysis on the Issues in ISO 6892-1 and TENSTAND WP4 Report Based on the Data of Confirm Tests by 21 Laboratories” - 01 May 2017

MPC20160109: Thermo-Cyclic Degradation Evaluation of Sewer CIPP Resin by ASTM Standard Tests and Raman Spectroscopy - 28 April 2017

MPC20160114: Effect of Heating and Thermal Deformation on Austenite Grain Size of B1500HS Boron Steel - 28 April 2017

MPC20160122: Corrosion Behaviors of 10CrNiCu High Strength Steel in Simulated Deep Sea Environment of High Hydrostatic Pressure and Low Dissolved Oxygen - 28 April 2017

ACEM20160027: Effective Surface Preparation Technique for Cementitious Samples in Nanoindentation Testing - 20 April 2017

ACEM20160039: Versatility of Piezoelectric Ring Actuator Technique (P-RAT) for Characterization of Cement Paste and Mortar - 20 April 2017

ACEM20160065: Measuring Volume Change Caused by Calcium Oxychloride Phase Transformation in a Ca(OH)2-CaCl2-H2O System - 20 April 2017

MPC20150075: Rheo-Dielectric Effects in Three Types of Dark Chocolate With Different Compositions - 03 March 2017

JTE20140440: Evaluation of Sub-Surface Residual Stress by Ultrasonic Method and Finite-Element Analysis of Welding Process in a Monel Pressure Vessel - 01 March 2017

JTE20150061: Influence of Non-Metallic Inclusions on the Fracture-Toughness Properties on the Longitudinal Welding of an API 5L Steel Pipeline - 01 March 2017

JTE20150274: Effective Thickness of Side-Grooved Clamped SE(T) Specimens for J-R Curve Testing - 01 March 2017

MPC20160098: On the Mesoscale Fracture Initiation Criterion of Heterogeneous Steels During Quenching - 24 February 2017

MPC20160113: Wear Response of Walnut-Shell-Reinforced Epoxy Composites - 22 February 2017

MPC20160058: Effect of Cooling Rate on Joint Shear Strength of Sn-9Zn Lead-Free Solder Alloy Reflowed on Copper Substrate - 21 February 2017

JTE20160110: Mechanical Testing and Application of Steel-plastic Geogrid Instead of Metal Mesh in Supporting Engineering - 01 January 2017

MPC20160053: Austempered Ductile Iron (ADI): A Review - 29 December 2016

MPC20160025: Quantitative Characterization of Hypoeutectic Aluminum–Silicon–Copper As-Cast Alloy Microstructures - 22 December 2016

MPC20160028: Microstructural Characterization of Ferrous Materials Forged by the Damascus Technique - 22 December 2016

MPC20160029: Microstructure of a Heat Treated Nickel-Aluminum Bronze and Its Corrosion Behavior in Simulated Fresh and Sea Water - 22 December 2016

MPC20160034: Aging of Cast 35Cr-45Ni Heat Resistant Alloys With Different Carbon Content - 22 December 2016

MPC20160047: Analysis of a Casting Fracture and Identification of Fatigue From Tire Track Markings - 22 December 2016

MPC20160048: Low Temperature Plasma Nitriding and Nitrocarburising of a Superaustenitic Stainless Steel - 22 December 2016

MPC20160057: X-Ray and Neutron Diffraction Studies of Quenched and Partitioned (Q&P) Multiphase Steel Microstructures - 22 December 2016

MPC20160061: Recrystallization Study of Nb-Bearing HSLA Steels After Laboratory Batch Annealing Using OIM-EBSD Techniques - 22 December 2016

MPC20160062: EBSD Characterization of Pilgered Alloy 800H After Heat Treatment - 22 December 2016

MPC20150052: Effect of Surface Deposited Layer on Active Screen Plasma Nitriding - 15 December 2016

MPC20150064: Wear Behavior of a Borided Nickel-Based Self-Fluxing Thermal Spray Coating - 15 December 2016

MPC20150065: Production and Characterization of Boride Coatings on Flame-Sprayed Martensitic Stainless Steel - 15 December 2016

MPC20150066: Characterization of Coatings Obtained by Boriding Niobizing Treatment of an AISI H13 Steel - 15 December 2016

MPC20150067: Characterization of Layers Produced by Boriding and Boriding-PVD on AISI D2 Tool Steel - 15 December 2016

MPC20150068: Production of Aluminide Layers on Copper and Copper Alloy - 15 December 2016

MPC20150069: Structure and Properties of Duplex Layers Composed of Chromium and Titanium Carbides - 15 December 2016

MPC20150074: Properties of CrC+(Ni-W) Duplex Layers Produced in Vacuum Chromizing Process Combined With Galvanic Treatment - 15 December 2016

MPC20150059: Using Barkhausen Noise and Digital Image Correlation to Investigate the Influence of Local Residual Stresses on Fatigue-Crack Propagation - 06 December 2016

MPC20150063: High Cycle Fatigue Strength of Punched Thin Fe-Si Steel Sheets - 06 December 2016

JTE20150090: Simulation of the Quasi-Static Uniaxial Compressive Behavior of Entangled Titanium Wire Materials (ETWMs) - 01 November 2016

JTE20150101: Influence of Steel Rebar Position on Concrete Double-K Fracture Toughness - 01 November 2016

MPC20160046: The Effect of Thermal Treatment on Microstructure and Corrosion of Nickel Base Alloy 690 (UNS N0 6690) - 27 September 2016

JTE20150262: Testing and Ranking Multiple Wafer-Manufacturing Processes With Fuzzy-Quality Data - 01 September 2016

MPC20160003: Effect of Heat Treatment and Surface Condition on Inter-Granular Corrosion of Alloy 800 - 26 August 2016

MPC20150042: Comparative Impact Behavior of High-C Steel After Conventional Quenching, Tempering, and Austempering - 26 August 2016

MPC20150046: Enhanced Hardenability and Tempering Resistance of AISI 4130 Steel by Ni Addition - 05 July 2016

JTE20140193: Assessment of the Poisson Ratio Effect on Low Cycle Fatigue (LCF) Behavior of Shear-Cracking Mode Materials - 01 July 2016

JTE20140284: Effect of Bushing Miniaturization on the Static Friction Coefficient - 01 July 2016

JTE20140329: Fracture-Toughness Evaluation of Solution Heat-Treated Zr-2.5Nb Alloys as per ASTM and ISO Standards - 01 July 2016

JTE20140347: Development of a New Device for Bending Fatigue Testing - 01 July 2016

JTE20140367: Evaluation of Thermomechanical Damage of a Slipper and Rail in a Rocket Sled System - 01 July 2016

JTE20140439: Three-Point Bending Fracture Behavior of Cracked Giant Magnetostrictive Materials Under Magnetic Fields - 01 July 2016

JTE20140445: Measurement of Properties of Cutting Fluids With CAPB (Vegetable Based Emulsifier) - 01 July 2016

JTE20150029: Numerical and Experimental Investigation of Friction Effect in Limiting Dome Height Test - 01 July 2016

JTE20140239: Experimental Evaluation and Prediction of Formability of Adhesive Bonded Steel Sheets at Different Adhesive Properties - 01 May 2016

JTE20140471: Applied Variable Neighborhood Search-Based Approach to Solve Two-Stage Supply Chain Scheduling Problems - 01 May 2016

JTE20140504: Evaluation of Austenite Phase in High-Carbon Steels by Ultrasonic Longitudinal Velocity - 01 May 2016

JTE20150032: Using Systematic Innovation Process to Improve the Manufacturing Technology of Platelet Agitators - 01 May 2016

MPC20150045: Influences on the Carbon Preform Porosity and Microstructure Evolution of MiCaSiC Ceramics Manufactured by the Liquid Silicon Infiltration (LSI) Process - 18 March 2016

MPC20150011: Electric Erosion Induced Microstructure and Mechanical Properties in Spark Plasma Sintered Al-4.5 wt. % Cu Alloy - 10 March 2016

MPC20150033: Aging Behavior of Pb Alloy–45 Vol. % Fly Ash Microballoon Composites - 10 March 2016

JTE20150317: Recommended Protocol for Round-Robin Studies in Additive Manufacturing - 01 March 2016

JTE20150320: Effect of Adhesion and Cohesion on Ductile Fracture in Cylindrical Upsetting Process - 01 March 2016

JTE20150346: Comparison of Flow Curves of AA 5457-O Sheet Material Determined by Hydraulic Bulge and Tensile Tests at Warm Forming Temperatures - 01 March 2016

MPC20150039: Heat Treatment of Precipitation-Hardening Stainless Steels Alloyed With Niobium - 26 February 2016

MPC20150036: Influence of Boronizing Treatment on Fe–Mn–Al–Si–C Steel - 11 February 2016

JTE20140095: Comparative Analysis of Curvilinear Gears With Produced by the New Production Method - 01 January 2016

JTE20140132: Alternative Approach for Strain Measurement and Control in Fatigue Tests at Elevated Temperature - 01 January 2016

JTE20150001: Approximation Algorithms of Crack Growth Rate Curve Based on Crack Size Variations - 01 January 2016

MPC20140065: Correlation of Microstructure With HAZ Welding Cycles Simulated in Ti-15-3 Alloy Using Gleeble® 3800 and SYSWELD® - 30 November 2015

MPC20150001: Influence of Composition and Prior Deformation on Phase Transformation Temperatures and Hardness in Direct Quenching Using Physical Simulation - 30 November 2015

MPC20150002: Comparison of Two Physical Simulation Tests to Determine the No-Recrystallization Temperature in Hot Rolled Steel Plates - 30 November 2015

MPC20150006: Different Applications of the Gleeble® Thermal–Mechanical Simulator in Material Testing, Technology Optimization, and Process Modeling - 30 November 2015

MPC20150007: Effect of Single and Multiple Thermal Cycles on Microstructure and Mechanical Properties of Simulated HAZ in Low Carbon Bainitic Steel - 30 November 2015

MPC20150008: Improving Steel Processing Through Thermo-Mechanical Simulation Studies - 30 November 2015

MPC20150010: Investigation of Austenite Evolution in Low-Carbon Steel by Combining Thermo-Mechanical Simulation and EBSD Data - 30 November 2015

MPC20150012: Analysis of Microstructure in Hot Torsion Simulation - 30 November 2015

JTE20140149: Apply TRIZ to Improve the Molten Zinc Corrosion Tester in Steel Manufacturing - 01 November 2015

JTE20140303: Influence of Fabrication Method on Tensile Response of Split Hopkinson Bar-Sized Specimens - 01 November 2015

JTE20140403: Reliability Analysis and Evaluation of Key Parts for Automobiles on the Basis of Dimensional Changes During High-Speed Operation - 01 November 2015

MPC20150023: Superelastic Ball Bearings: Materials and Design to Avoid Mounting and Dismounting Brinell Damage in an Inaccessible Press-Fit Application—Part I Design Approach - 13 October 2015

MPC20150028: Superelastic Ball Bearings: Materials and Design to Avoid Mounting and Dismounting Brinell Damage in an Inaccessible Press-Fit Application. Part II: Detailed Analysis - 13 October 2015

JTE20130219: Tool Replacement for Photovoltaic Industry Processes With Multiple Characteristics Based on Capability Index - 01 September 2015

JTE20130268: Measurement of and Reverse Compensation for Spatial Position Error of Industrial Robots - 01 September 2015

JTE20140051: The Control of Sand Curtains Used in Abrasion Testing - 01 September 2015

JTE20130102: Cohesive Zone Property Measurement by a Hybrid Experimental and Numerical Method Using Ball Indentations - 01 July 2015

JTE20130216: Enhancement of Inventory Management for the Wafer Manufacturing Industry by Combining Market Demand Forecast and Demand-Pull Replenishment - 01 July 2015

JTE20130066: Method of Processing Ultrasonic In-line Monitoring Signals in Polymer Mixing Extrusion to Determine Mixing State - 01 May 2015

JTE20130218: Effect of Lubrication in Cold Upsetting Using Experimental and Finite Element Modeling - 01 January 2015

JTE20130278: Comparison of Four Different Methods to Determine the Hardness of Plasma-sprayed Cr3C2–NiCr Coating by Nano-indentation - 01 January 2015

MPC20120002: Stribeck-Type Curves of Alternative Engine Oils: Part I: Gray Cast Iron Liners - 31 December 2014

MPC20130021: Effect of Hardfacing Processes on Ballistic Performance of Q&T Steel Joints - 31 December 2014

MPC20130028: Study on Microstructure and Mechanical Properties of Thick Low-Alloy Quench and Tempered Steel Welded Joint - 31 December 2014

MPC20130087: Erosion Wear Characteristics of Surface Modified Grey Cast Iron by WC–Co–Cr/NiCrBSi Coating Using HVOF Thermal Spray Process - 31 December 2014

MPC20140024: Production of Austempered Gray Iron (AGI) Using Forced Air Cooling - 31 December 2014

MPC20140034: Appraisal of Solution Heat Treatment on Elimination of Hafnium Rich γ–γ′ Eutectic and Prior Particle Boundary Precipitate in a Superalloy Powder - 31 December 2014

MPC20130086: Distortion Control: Quenching Apparatus for Hardening Parts: An Overview - 31 December 2014

MPC20130089: Large Forgings: Microstructural Evolution and Residual Stresses Due to Quenching Treatments—A Combined Numerical and Experimental Approach - 31 December 2014

MPC20130093: Development of a New Method for Testing Cooling Power Using a Silver Probe and a New Reference Quenching Fluid - 31 December 2014

mpc20130095: Investigations of Nucleate Boiling Processes During Quenching Based on Possibilities of Noise Control System - 31 December 2014

MPC20130096: Batch Intensive Quenching Processes for Minimizing Steel Part Distortion and Improving Part Performance Characteristics - 31 December 2014

MPC20130099: Flow Optimization of Gas Quenching Processes Using Perforated Plates - 31 December 2014

MPC20130101: A Comparative Assessment of the Hardness of Nano-Structured Bainitic Steel Affected by Using Various Quenchants - 31 December 2014

MPC20130103: Investigation and Development of Spray Cooling Device for Heat Treatment of Large Steel Forgings - 31 December 2014

MPC20130104: Modeling and Simulation of Carbide Precipitation During Tempering of Alloy Tool Steel - 31 December 2014

MPC20130105: Influence of Additive Chemistry on the Physical, Chemical, and Cooling Properties of Quenching Oils - 31 December 2014

MPC20130106: Cooling Characteristics of Meso- and Nanofluids Prepared by the DPIE Method - 31 December 2014

MPC20130107: Molecular Dynamics Simulation of Heat Transfer during Quenching in CNT Nanofluids - 31 December 2014

MPC20130110: Influence of External Factors on the Cooling Ability of Vacuum Quenching Oils - 31 December 2014

MPC20130112: Determination of Heat Transfer Coefficients in High Speed Quenching Processes - 31 December 2014

MPC20130114: Nucleate Boiling Heat Transfer: Temperature Pulsations or Local Thermal Shocks - 31 December 2014

MPC20130115: Overview on Super Strengthening Phenomenon Taking Place During Intensive Quenching of Steels - 31 December 2014

MPC20140003: “Reference QuenchProbe”—An Alternative Probe Design for In-Situ Estimation of Cooling Rates, Heat Flux, and Hardenability During Immersion Quenching of Hardenable Steels - 31 December 2014

MPC20140005: Modeling of Dimensional Changes and Residual Stresses After Transformation-Free Cooling - 31 December 2014

MPC20140008: Partial Decarburization and Intensive Quenching to Increase Fatigue Limit of Quenched Small Parts - 31 December 2014

MPC20140019: Cooling Characteristics of Water Based Nanofluids With Agitation - 31 December 2014

MPC20140021: High-Speed Quenching of High Carbon Steel - 31 December 2014

JTE20130078: Application of TRIZ to Improve the Material Handling and Productivity in a Screw-Packaging Factory - 01 November 2014

MPC20130075: The Design of a Laboratory Test Machine to Simulate Thermal Fatigue in Hot-Working Tool Steels - 20 September 2014

MPC20130072: Fracture Toughness Evaluation of Zr-2.5Nb Pressure Tubes Manufactured Employing Double Forging for PHWR700 - 20 September 2014

MPC20130082: Steels for Plastic Molding: Relationship between Mechanical and Microstructural Properties - 20 September 2014

MPC20130094: The Influence of Quenching and Aging on Fracture Toughness of the Al-Zn-Mg-Cu Alloy 7449 - 20 September 2014

JTE20130191: Testing a Model for Evaluating Influence of PM Practices on ETO Manufacturing Performance - 01 September 2014

JTE20130146: Analysis of the Industrial Cutting Process of Natural Building Stones: Evaluation of Electric Power Consumption - 01 July 2014

JTE20120236: Influence of Shoulder Diameter, Plunge Depth, Welding Speed, Rotational Speed on the Tensile Behavior of Friction Stir Welded AA 6061-T6 Sheets - 01 May 2014

JTE20120346: Improving Belleville Washer Spring Characteristics Using Elastomer Filling - 01 January 2014

MPC20130010: Optimizing the Brazing Variables for the Fully Dense Freeform Fabrication Process by Design of Experiments - 27 September 2013

MPC20120029: Failure Analysis of a Shaft-Coupling Bracket - 13 September 2013

MPC20120007: The Effect of the Addition of Strontium and Cerium Modifiers on Microstructure and Mechanical Properties of Hypereutectic Al-Si (LM30) Alloy - 30 August 2013

MPC20120026: Heat Treating of a 718Plus Superalloy - 08 May 2013

JTE20120061: Analysis of the Machine Repair Models With Multi-Threshold Synchronous Vacations - 01 May 2013

MPC20120009: Wear Evaluation of Pack Boronized AISI 1060 Steel - 04 March 2013

JTE20120021: Calibration of Seal Coat Application Rate Design - 01 March 2013

MPC20120003: Effect of Resin Cure Recipe and Ambient Processing Temperature on the Material Properties of Marine Grade Polymer Matrix Composite Materials - 06 February 2013

JTE20120022: Aircraft Turbine Engine Manufacturing with Multiple Specifications - 01 January 2013

MPC20120006: Fast Primary Cooling: Alternative to Lead Baths for High-Carbon Steel Wire Patenting - 07 December 2012

MPC104397: Optimization of an Induction Hardening Process for a Steel Gear Component - 30 November 2012

JTE103903: Fracture-Toughness Evaluation in Submerged Arc-Welding Seam Welds in Nonstandard Curved SE(B) Specimens in the Short Radial Direction of API 5L Steel Pipe - 01 November 2012

MPC104533: Local Film Boiling and Its Impact on Distortion of Spur Gears During Batch Quenching - 19 October 2012

MPC104385: Studies on Temperature Distribution in Electromagnetic Welding Process - 25 September 2012

MPC104389: Modeling the Carbonitriding of Steel - 25 September 2012

MPC104365: Effect of Boundary Heat Transfer Coefficient and Probe Section Size on Cooling Curves During Quenching - 21 September 2012

MPC104382: Modeling of Distortion during Casting and Machining of Aluminum Engine Blocks With Cast-in Gray Iron Liners - 21 September 2012

MPC104384: Mathematical Model of Thermal and Microstructural Evolution during Austempering of Ductile Iron - 21 September 2012

MPC104390: Modeling the Nitriding of Steel by Compound Layer Growth Model - 21 September 2012

MPC104417: Determination of Thermal Boundary Conditions During Immersion Quenching by Optimization Algorithms - 21 September 2012

MPC104430: Ordinal-Optimization-Based Framework for Optimization of Cooling Conditions for Reducing Distortion in Hot-Rolled Asymmetric Sections - 21 September 2012

MPC104479: Simulation of Quenching: A Review - 21 September 2012

MPC104376: Thermo-mechanical Modeling of Laser-MAG Hybrid Welding and Consequences on Large Structure - 20 September 2012

MPC104392: Mathematical Modeling of Steel Heat Treating Using CCT Diagrams - 20 September 2012

MPC104632: Quenching Simulation of Aluminum Alloys Including Mechanical Properties of the Undercooled States - 20 September 2012

MPC104378: Thermo-mechanical Modeling of Laser Deposited Bimetallic Components - 19 September 2012

MPC103926: Influence of CO or CO2 as Carbon Donator on the Development of the Compound Layer during Nitrocarburizing of Alloyed Steels - 19 July 2012

MPC104374: Process Simulation of Single and Dual Frequency Induction Surface Hardening Considering Magnetic Nonlinearity - 19 July 2012

MPC104386: Modeling the Lowest Hardness Point in a Steel Bar During Quenching - 19 July 2012

MPC104423: Numerical Simulation of Heat Treatment Based on the Model With Expanded Solution Domain - 19 July 2012

MPC104477: Coupled Analysis of Surface Heat Flux, Microstructure Evolution, and Hardness during Immersion Quenching of a Medium Carbon Steel in Plant Conditions - 19 July 2012

MPC104556: Anisotropic Transformation Strain and Its Consequences on Distortion during Austenitization - 19 July 2012

MPC104656: Real and Effective Heat Transfer Coefficients (HTCs) Used for Computer Simulation of Transient Nucleate Boiling Processes during Quenching - 19 July 2012

JTE104414: Implementation of Evaluating Process Capability Index Cpk for Processes with Multiple Characteristics - 01 July 2012

JAI104342: Comparison of the Performance of Copper Oxide Nanofluid with Water in Electronic Cooling - 01 May 2012

JAI104404: Effect of Addition of Aluminum Nanoparticles on Cooling Performance and Quench Severity of Water during Immersion Quenching - 01 May 2012

JAI104409: Nucleate Pool Boiling Heat Transfer Correlation for TiO2-Water Nanofluids - 01 May 2012

JAI104416: Synthesis of Copper Nanofluids Using Ascorbic Acid Reduction Method Via One Step Solution Phase Approach - 01 May 2012

JAI104429: Preparation and Characterization of Surfactant Coated Ce-Zr Nanoparticles and Nanofuel - 01 May 2012

JAI104442: Optimum CNT Concentration and Bath Temperature for Maximum Heat Transfer Rate during Quenching in CNT Nanofluids - 01 May 2012

JAI104443: Flow Visualization, Critical Heat Flux Enhancement, and Transient Characteristics in Pool Boiling Using Nanofluids - 01 May 2012

JTE104159: Solvothermal Synthesis of High Yield CdS Nanowires in Ethylenediamine - 01 May 2012

JTE104253: Characterizing Profiled Fibers by Multiscale Shape Representations - 01 May 2012

JAI103375: Comparison of the Laser and Electron Beam Welding of Steel Sheets Treated by Nitro-Oxidation - 01 February 2012

JAI103414: Adhesion of Thermally Sprayed Metallic Coating - 01 February 2012

JAI103436: Mechanical and Microstrutural Characterization of Weldments of Ferritic Stainless Steel AISI 444 Using Austenitic Stainless Steels Filler Metals - 01 February 2012

JAI103564: Microstructural Characterization of Layers Produced by Plasma Nitriding on Austenitic and Superaustenitic Stainless Steel Grades - 01 February 2012

JAI103568: Layer Growth Kinetics during Post-Discharge Nitriding - 01 February 2012

JAI104072: Intensive Quenching of Steel Parts and Tools in Water Salt Solutions of Optimal Concentration - 01 February 2012

JAI104173: Effect of Accuracy of Temperature Measurements on Determination of Heat Transfer Coefficient during Quenching in Liquid Media - 01 February 2012

JAI103387: Boiling Heat Transfer: An Overview of Longstanding and New Challenges - 01 January 2012

JAI103534: Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010 - 01 January 2012

JAI103817: Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants - 01 January 2012

JAI103380: Modeling and Simulation of Film and Transitional Boiling Processes on a Metallic Cylinder During Quenching - 01 November 2011

JTE103122: Laboratory Evaluation of Microwave Heating Method for Hot In-Place Recycling - 01 November 2011

JAI103376: Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Quenchants - 01 October 2011

JAI103395: Impact Properties of Vacuum Heat Treated AISI D2 and 8 % Cr Cold Work Tool Steels - 01 October 2011

JAI103407: Effects of Austenitizing Temperatures on Primary Structure Transformation in Cast High-Speed Steel of M2 Type Inoculated with Powder Additions of W and TiB2 - 01 October 2011

JAI103382: CFD-Simulation of Film Boiling at Steel Cooling Process - 01 September 2011

JAI103525: Microstructure and Hardness Prediction at the Core of Steel Parts of Any Configuration during Quenching - 01 September 2011

JAI103253: Effect of Plasma Nitriding on the Wear and Corrosion Properties of Hastelloy CW2M Alloy - 01 July 2011

JAI103272: Impact Wear Performance of Thin Hard Coatings on TiC Cermets - 01 July 2011

JAI103282: Dependence of the Heat Transfer Coefficient at Quenching on Diameter of Cylindrical Workpieces - 01 July 2011

JAI103418: Bainite Formation at Low Temperatures in High C-Si Steel and its Mechanical Behavior - 01 July 2011

JAI103485: Duration of the Transient Nucleate Boiling Process and Its Use for the Development of New Technologies - 01 July 2011

JAI103364: Application of Numerical Methods to Simulate Direct Immersion Quenching Process - 01 June 2011

JAI103243: Hot-Dip Galvanizing Process Using ZinQuench for Processing Advanced High-Strength Steels - 01 May 2011

JAI103326: Microstructural Characterization of an AISI D2 Tool Steel Submitted to Cryogenic Treatment - 01 May 2011

JAI103435: Laser Cladding and Heat Treatment of Ni–Co–Mo Maraging Steel - 01 May 2011

JTE103234: Combining Gray Relation and Analytical Hierarchy Process Concepts to Develop a Decision Support System of Supply Chain Project Management - 01 May 2011

JAI103228: Effect of Aluminum Coating by Magnetron Sputtering on Corrosion Resistance of AZ31B Alloy - 01 April 2011

JAI103357: Interdiffusion Phenomena of Zirconia-Nitride Layers on Coated AISI 310 Steel - 01 April 2011

JAI103397: Analysis and Prevention of Quenching Failures and Proper Selection of Quenching Media: An Overview - 01 April 2011

JAI103403: Influencing Factors of Heat Transfer Coefficient in Air and Gas Quenching - 01 April 2011

JAI103439: Modification of NiAl Intermetallic Coatings Processed by PTA with Chromium Carbides - 01 April 2011

JAI103459: Isothermal Martensite Formation at Sub-Zero Temperatures - 01 April 2011

JAI103483: Effect of Cooling Rate During Quenching on the Toughness of High Speed Steels - 01 April 2011

JAI103242: CVD of Alternated MCD and NCD Films on Cemented Carbide Inserts - 01 March 2011

JAI103250: The Effect of Si on the Precipitates for Nb Bearing High Purity Ferritic Stainless Steel - 01 March 2011

JAI103279: Control Strategies for an Inline Cooling Device in Hot Strip Processing of Innovative Steel Materials - 01 March 2011

JAI103286: Effect of Gas Pressure on Active Screen Plasma Nitriding Response - 01 March 2011

JAI103438: Simulation of Austenitization Processes in Fe–C Steels by Coupled Cellular Automaton and Finite Difference Methods - 01 March 2011

JTE103069: Two Tests for Supplier Selection Based on Process Yield - 01 March 2011

JAI103026: Damage Build-Up in Zirconium Alloys During Mechanical Processing: Application to Cold Pilgering - 01 February 2011

JAI103210: Surface Hardening of an AISI D6 Cold Work Steel Using a Fiber Laser - 01 February 2011

JAI103223: Ti–Al–Si–C–N Hard Coatings Synthesized by Hybrid Arc-Enhanced Magnetron Sputtering - 01 February 2011

JAI103284: Effect of the Thermo-Mechanical Processing Characteristics on the Recrystallization of CuZn34 Brass - 01 February 2011

JAI103361: The Effect of Prior Tempering on Sub-Zero Treatment to Reduce Retained Austenite - 01 February 2011

JAI103188: Influence of Laser Shock Processing on Surface Microstructures and Properties of Carbon Steel - 01 January 2011

JAI103288: Mathematical Modeling and Computer Simulation of Fatigue Properties of Quenched and Tempered Steel - 01 January 2011

JAI103386: Heat Transfer Stages Recognition by Boiling Acoustic During Quenching - 01 January 2011

JTE101910: Temperature Distribution during Friction Stir Spot Welding of Magnesium Alloy AM60B - 01 January 2011

JAI103079: Metallo-Thermo-Mechanical Coupled Analysis of Quenching Process for the Plane Strain Problems - 01 November 2010

JAI103014: Texture Evolution of Zircaloy-2 During Beta-Quenching: Effect of Process Variables - 01 October 2010

JAI102992: Segregation in Vacuum Arc Remelted Zirconium Alloy Ingots - 01 September 2010

JAI103050: Explosion Cladding: An Enabling Technology for Zirconium in the Chemical Process Industry - 01 September 2010

JTE102397: Lamb Waves Technique Applied to the Characterization of Defects in Friction Stir Welding of Aluminum Plates: Comparison with X-Ray and Ultrasonic C-Scan - 01 September 2010

JAI102544: Effect of Cladding on Biaxially Loaded Underclad Part-Through Cracks - 01 April 2010

JAI102606: Effect of the HVOF Deposition Process in the Chemical Composition of Tungsten Carbide Layers with Cobalt or Nickel Binders - 01 March 2010

JAI102834: Comparison of Inclusion Assessment Rating Standards in Terms of Results and Reliability by Numerical Simulation - 01 March 2010

JAI102647: Prediction of Quench-Hardness within the Whole Volume of Axially Symmetric Workpieces of Any Shape - 01 February 2010

JAI102660: Measurement of the Cooling Power of Polyethylene Glycol Aqueous Solutions Used as Quenching Media - 01 February 2010

JAI101840: The Effect of Agitation and Quenchant Temperature on the Heat Transfer Coefficients for 6061 Aluminum Alloy Quenched in Distilled Water - 01 January 2010

JAI102503: Elastic-Plastic Stress Analysis of Cold-Worked Pin-Loaded Holes - 01 November 2009

JAI102630: Case Depth and Static Capacity of Surface Induction-Hardened Rings - 01 November 2009

JAI101881: The Effect of Core and Carburized Surface Microstructural Stability on Residual Stress Evolution during Tempering - 01 October 2009

JAI102188: Comparison of Structure and Quenching Performance of Vegetable Oils - 01 October 2009

JAI101817: Improving Control of a Quenching Process by Coupling Analysis Methods - 01 September 2009

JAI101770: Minimizing Machining Distortion in Aluminum Alloys through Successful Application of Uphill Quenching—A Process Overview - 01 July 2009

JAI102021: Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties - 01 July 2009

JAI101788: Dilatometric Analysis to Study Aging of Aluminum Alloys - 01 June 2009

JAI101748: Finite Element Method Numerical Simulation of the Carburizing Process - 01 May 2009

JAI101780: Enhanced Hardenability through Application of Magnetic Fields - 01 May 2009

JAI101804: Numerical Simulation of the Mechanical Properties of Cr12 Steel during Gas Quenching - 01 May 2009

JAI101925: Investigation of Beltline Welding Seam of the Greifswald WWER-440 Unit 1 Reactor Pressure Vessel - 01 May 2009

JAI102095: Modeling of Quenching and Tempering Induced Phase Transformations in Steels - 01 May 2009

JAI102131: Evolution of Quench Factor Analysis: A Review - 01 May 2009

JAI101782: Quenching Homogeneity and Intensity Improvement in Batch Mode High Pressure Gas Quenching - 01 April 2009

JAI101801: Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces - 01 April 2009

JAI101806: Optimum Strategies to Reduce Residual Stresses and Distortion during the Metal Quenching Process - 01 April 2009

JAI101809: Explanation on the Origin of Distortion in Induction Hardened Ring Specimens by Computer Simulation - 01 April 2009

JAI101882: Correlation between Cooling Curves Obtained with a Silver Probe and Quenching Properties of 5140 Steel Bars - 01 April 2009

JAI101781: Formulation of a Guideline for the Determination of Heat Transfer Coefficient during Gas Quenching - 01 March 2009

JAI101800: Severity of Quenching and Kinetics of Wetting of Nanofluids and Vegetable Oils - 01 March 2009

JAI101816: A Complete System for Testing and Evaluation of Quenchants and Quenching Systems - 01 March 2009

JAI101868: The Analysis and Control of Distortion in Carbonitrided and Nitrocarburized Thin-Shelled Plain Carbon Steel Automotive Powertrain Components - 01 March 2009

JAI101558: Statistical Analysis of Fatigue Related Microstructural Parameters for Airframe Aluminum Alloys - 01 February 2009

JAI101766: A Review on Modeling and Simulation of Quenching - 01 February 2009

JAI101773: Technology and Applications of Alternately Timed Quenching Technology - 01 February 2009

JAI101775: Effects of Cooling Rate Fluctuation on Cooling and Transformation Behavior of Steel upon Direct Quenching - 01 February 2009

JAI101776: An Overview of Technology and Equipment for Hardening of Large Steel Parts - 01 February 2009

JAI101849: Gas-Cooling of Multiple Short Inline Disks in Flow Along Their Axis - 01 February 2009

JAI101928: Spray Quenching in Induction Hardening Applications - 01 February 2009

JAI101981: Quenchant Characterization by Cooling Curve Analysis - 01 February 2009

JAI101757: Energy Efficient and Eco-friendly Intensively Quenched Limited Hardenability Low Alloy Steels - 01 January 2009

JAI101784: Heat Transfer During Quenching and Assessment of Quench Severity—A Review - 01 January 2009

JAI101790: An Investigation on Quenching Performance of Hot Alkaline Bath - 01 January 2009

JAI101792: One More Discussion “What is Intensive Quenching Process?” - 01 January 2009

JAI101796: Prediction of Distortion of Automotive Pinion Gears during Quenching Using CFD and FEA - 01 January 2009

JAI101818: Accurate Determination of Surface Heat Fluxes During Quenching Characterized by Boiling Water Heat Transfer - 01 January 2009

JAI101852: The Influence of Surface Temperature on Rewetting Behavior During Immersion Quenching of Hollow and Solid Cylinders - 01 January 2009

JAI101922: Analysis of the Segerberg Hardening Power Equation - 01 January 2009

JAI102098: Water and Polymer Quenching of Aluminum Alloys: A Review of the Effect of Surface Condition, Water Temperature, and Polymer Quenchant Concentration on the Yield Strength of 7075-T6 Aluminum Plate - 01 January 2009

JAI101769: Using Polyalkylene Glycol Quenchants to Effectively Control Distortion and Residual Stresses in Heat Treated Aluminum Alloys - 01 November 2008

JAI101789: Starch-Based Quenchants as an Eco-Friendly Alternative to Quenching Oil - 01 November 2008

JAI101797: Explanation of the Origin of Distortion and Residual Stress in Carburized Ring Using Computer Simulation - 01 November 2008

JAI101799: Computer Simulation of Quenched Steel Working Stress - 01 November 2008

JAI101805: Enhancement and Local Regulation of Metal Quenching Using Atomized Sprays - 01 November 2008

JAI101810: Numerical Simulation of Residual Stresses in Quenched Steel Bodies Using Subroutines to Represent TTT and CCT Diagrams - 01 November 2008

JAI101829: An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods - 01 November 2008

JTE101473: Research on the Relation Between Magnetic Barkhausen Noise and Ferromagnetic Materials with Different Heat Treatments - 01 November 2008

JAI101537: Influence of the Peening Intensity on the Fatigue Behavior of Shot Peened Titanium Components - 01 October 2008

JAI101813: Determination of Surface Heat Transfer Coefficients of Cr12MoV Steel Cylinder during High-Speed Gas Quenching at Atmospheric Pressure - 01 October 2008

JAI101871: A Feasibility Study of the Use of Bismuth Bath to Replace Lead Bath as the Quenching Media for Steel Heat-Treating - 01 October 2008

JAI101549: Effect of Prestrain on Fatigue Crack Growth of Age-Hardened Al 6061-T6 - 01 September 2008

JAI101777: Accelerated Cooling of Steel Plates: The Time Has Come - 01 September 2008

JAI101779: Optimization of the Heat Treatment of a 17-4 PH Stainless Steel by Dilatometric Technique - 01 September 2008

JAI101827: Cooling Characteristic Test of Quenching Media - 01 September 2008

JAI101661: Fatigue Response of Aluminum Aircraft Structure under Engineered Residual Stress Processing - 01 July 2008

JAI101680: Gas-Jet Quenching - 01 June 2008

JAI101570: The Influence of Residual Stresses on the Fatigue Strength of Cold-Formed Structural Tubes - 01 May 2008

JAI101568: Fatigue Crack Growth in Integrally Stiffened Panels Joined Using Friction Stir Welding and Swept Friction Stir Spot Welding - 01 April 2008

JAI101587: Fretting Fatigue Behavior of Shot-Peened Ti-6Al-4V and IN100 - 01 April 2008

JAI101420: Effect of Active Elements on the Oxidation Behavior of a FeCrAl Alloy Produced by Co-Rolling and Annealing - 01 February 2008

JAI101223: Tribochemistry of Multiply Alkylated Cyclopentane Oils on Diamond-like Carbon (DLC) Coated Thrust Bearings - 01 January 2008

JAI101177: Prospects for Adapting Current ASTM Wear and Erosion Tests for Bulk Materials to Thin Films, Coatings, and Surface Treatments - 01 November 2007

JTE100677: Production of Aluminum-Silicon Carbide Composites Using Powder Metallurgy at Sintering Temperatures Above the Aluminum Melting Point - 01 November 2007

JAI101018: Welding of Thermoplastic Roofing Membranes Subjected to Different Conditioning Procedures - 01 September 2007

JTE100721: Reconstitution Process by Stud Welding for the Surveillance Program in Mexico - 01 September 2007

JTE100077: Laser Welding Conditions to Improve Tensile Strength and Fatigue Strength of a Lap Joint in Aluminum Alloys - 00 July 2007

JTE12575: Monitoring Hole Quality in a Drilling Process Using a Fuzzy Subtractive Clustering-basedqa System Identification Method - 01 May 2007

JTE100188: Quality Assurance of Manufactures by Means of Intelligent Tomographic Processing - 01 January 2007

JAI100422: Characteristics of Vanadium Alloyed Carbonitrided Steel for Rolling Bearing Applications - 01 November 2006

JAI14022: A Review of Swedish Bearing Steel Manufacturing and Quality Assurance of Steel Products - 01 November 2006

JAI14042: Influence of Steel Making and Further Processing on the Distortion of Bearing Steel Components - 01 October 2006

JAI13414: Optimum Thread Rolling Process that Improves SCC Resistance - 01 July 2006

JAI13067: Development of a Fastener Structural Element Test for Certifying Navy Fastener Materials - 01 June 2006

JAI14024: Study of Vacuum Carbon-Deoxidization of High Carbon Chromium Bearing Steel - 01 June 2006

JAI12552: Thermal Residual Stress Relaxation in Powder Metal IN100 Superalloy - 01 May 2006

JAI13550: Investigation of Oxygen-Acetylene Flashback Reactions in Welding Hoses - 01 May 2006

JAI13614: Simulation of Heat Transfer and Residual Stresses from Cooling Curves Obtained in Quenching Studies - 01 May 2006

JAI13069: Influence of Cold Rolling Threads Before or After Heat Treatment on the Fatigue Resistance of High Strength Fine Thread Bolts for Multiple Preload Conditions - 01 April 2006

JAI13077: 3D FEA Simulations to Assess Residual Stresses in Riveting Processes - 01 March 2006

JAI14050: Plasma Assisted Heat Treating Processes of Bearing Components - 01 March 2006

JAI12547: An Integrated Approach to the Determination and Consequences of Residual Stress on the Fatigue Performance of Welded Aircraft Structures - 01 February 2006

JAI14055: Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel - 01 February 2006

JAI14106: Radioactivity Inspections Applied to the Steelmaking Industry - 01 February 2006

JAI12551: Influence of Cold Rolling Threads Before or After Heat Treatment on High Strength Bolts for Different Fatigue Preload Conditions - 01 January 2006

JAI12337: The Effect of Beta-Quenching in Final Dimension on the Irradiation Growth of Tubes and Channels - 01 June 2005

JAI12569: Effect of Shot Peening on Fatigue Crack Growth in 7075-T7351 - 01 June 2005

JAI12895: A Preliminary Mathematical Removal-Rate Model for Si CMP - 01 June 2005

JAI13083: Wear Behavior of Niobium Boride Coatings - 01 June 2005

JAI12213: Determining Nitriding Parameters with Neural Networks - 01 May 2005

JAI12558: Stress Intensity Factor Analysis and Fatigue Behavior of a Crack in the Residual Stress Field of Welding - 01 May 2005

JTE12531: Influence of Two Hexavalent Chromium-Free Coating types on Mechanical Behavior of Bolted Joints - 01 May 2005

JAI12334: Simulation of Cold Pilgering Process by a Generalized Plane Strain FEM - 01 March 2005

JAI19050: Large Commercial Aircraft Loading Spectra: Overview and State of the Art - 01 November 2004

JAI19032: Spectrum Fatigue Testing and Small-Crack Life Prediction Analysis on a Coupon Similar to a Critical Design Detail of a CF188 Hornet Component - 01 October 2004

JAI19046: Study on Fatigue Design Loads for Ships Based on Crack Growth Analysis - 01 October 2004

JAI19053: Fuzzy Probabilistic Assessment of Aging Aircraft Structures Subjected to Multiple Site Fatigue Damage - 01 October 2004

JAI11573: Corrosion Risk Assessment of Aircraft Structures - 01 September 2004

JAI19036: Spectrum Coupon Testing of Fatigue-Resistant Fasteners for an Aging Military Aircraft - 01 September 2004

JTE10965: A Comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of Aluminum AA1050 - 01 July 2004

JAI12121: Can Laboratory Pre-Treatment Of Welders' Protective Clothing Simulate Their Aging Process In Normal Use? - 01 May 2004

JTE11891: Residual Stress Measurement and Modeling by the Initial Strain Distribution Method: Part II—Application to Cladded Plates with Different Heat Treatments - 01 May 2004

JTE12380J: Novel Detection of Welding Seam Parameters Based on Active Infrared Technology - 01 November 2003

JTE12274J: Service Temperature Characterization of Polytetrafluoroethylene-Based Gaskets - 01 September 2001

JTE12241J: A Critical Appraisal of Fracture Toughness Measurements on AA6061 and an Al2O3-Particle Reinforced AA6061 Alloy for Various Heat Treatments - 01 March 2001

JTE12098J: A New Technique for Measurement of the Strength of Ceramic Shells in the Precision Casting Process - 01 May 2000

JTE12079J: Ultrasonic Monitoring of a Low-Temperature Diffusion Bonding Process - 01 March 2000

JTE12051J: Data Supporting a Provisional American Society for Testing and Materials (ASTM) Method for Metalworking Fluids, Part 2: Preliminary Report of Evaluation of a Ternary Solvent Blend in a Provisional ASTM Method for Metalworking Fluids (P-42-97) - 01 March 1999

JTE12003J: Investigation of Welding Effect on Rebars Using Neural Networks - 01 May 1998

CTR10523J: Hydrodynamic Machining of Fiber-Reinforced Composites - 01 April 1996

JTE12686J: Empirical Determination of the Manufacturing Processes Which Affect EFP Liner Performance - 01 March 1996

CTR10450J: Electrodeposited Cobalt-Tungsten as a Diffusion Barrier Between Graphite Fibers and Nickel - 01 October 1995

JTE11411J: Book Reviews - 01 September 1995

JTE10431J: Effect of Carbide and Oxide Coating Thickness on Cutting Tool Wear in the Turning Process - 01 July 1995

JTE10903J: TOFSIMS Studies of Cleaning Procedures and Silane Surface Treatments of Steels - 01 March 1995

JTE10908J: Book Review - 01 March 1995

JTE10396J: Metal Surface Preparation by Plasma-Polymerized Films - 01 January 1995

JTE11857J: Determination of Softening Kinetics in a Material by Measuring the Evolution of Hot Flow Stress - 01 November 1994

CTR10414J: Measurement of Interfacial Properties for Aluminum and Titanium Matrix Alloy Composites Manufactured by Vacuum Plasma Spray - 01 July 1994

JTE11760J: Book Reviews - 01 March 1993

JTE11915J: Book Reviews - 01 March 1992

JTE12615J: Engineering Project Management - 01 November 1991

JTE12616J: Experimentation and Uncertainty Analysis for Engineers - 01 November 1991

JTE12587J: Fatigue Predictions for Components under Biaxial Reversed Loading - 01 September 1991

JTE12590J: Understanding Impact Testing of Pallet Nails and Staples - 01 September 1991

JTE12573J: Static and Impact Flexural Properties of Common Wire Nails - 01 July 1991

JTE12580J: Detection, Diagnosis, and Prognosis of Rotating Machinery to Improve Reliability, Maintainability, and Readiness Through the Application of New and Innovative Techniques - 01 July 1991

JTE11132J: Effect of Relative Humidity on Permeance of Coatings - 01 September 1989

CTR10161J: Damping Behavior of Planar Random Carbon Fiber Reinforced 6061 Al Matrix Composites Fabricated by High-Pressure Infiltration Casting - 01 September 1989

JTE11057J: A Review of Petroleum Coke Preparation Procedures - 01 January 1988

JTE11012J: A Survey of Grade Verification Methods for Steel Plants - 01 July 1987

JTE11255J: Book Review - 01 July 1985

JTE10782J: A Positron Study of the Quench and Tempering Process in AISI 4340 Steel - 01 May 1985

JTE11585J: In-Plane Compression: A New Laboratory Forming Technique to Study the Effect of Large Drawing Deformations in Sheets on Their Subsequent Mechanical Behavior - 01 January 1983

CCA10265J: Production Technology of Expanded Clay Aggregate Gravel with Bulk Density Below 300 kg/m3 - 01 January 1983

CTR10765J: An Approximate Method of Sizing Soluble Plaster Mandrels in Filament Winding - 01 July 1982

JTE11648J: Quenching, Tempering, and Aging Chromium-Molybdenum-Vanadium Cast Steels - 01 March 1981

CTR10694J: Quasi-Isotropic, Thick Composite Laminates Fabricated by the Matched Metal Die Compression Molding Process - 01 January 1980

CTR10654J: Cutting, Machining, and Drilling of Composites - 01 October 1978

JTE10569J: A Mathematical Model for the Determination of the Breakage Distribution in Batch Grinding - 01 September 1978

JTE10536J: Processing of Glass Containers for Parenteral Products - 01 January 1977

JTE10537J: The Removal of Stearic Acid Monolayers from Glass with Organic Solvents - 01 January 1977

JTE10538J: Cleaning Borosilicate Glass for Biological Application - 01 January 1977

JTE10192J: Production and Economic Consequences When Machining Glass Ceramic - 01 March 1976

JTE10508J: Fatigue Damage Alleviation by Intermittent Electroplating - 01 January 1976

JTE10510J: Mechanical Properties at Elevated Temperature of CuBath® Electroplated Copper for Multilayer Boards - 01 January 1976

JTE10514J: Machining Glass Ceramic in Dry and Wet Environments - 01 January 1976

JTE10080J: Sources and Magnitude of Errors in the Measurement of Coating Thickness with the Double-Beam Interference Microscope - 01 March 1974