All Health Care & Medical Devices Journal Papers

Search within Health Care & Medical Devices


JTE20180116: Assessing the Medical Staff’s Overall Satisfaction of Patient Safety Culture from a Regional Teaching Hospital in Taiwan - 01 November 2020

JTE20180199: Design and Characterization of Secondary and Tertiary Layers of a Multilayer Wound Dressing System - 01 July 2020

JTE20170273: A Review on Evaluation of Wireless Medical Monitoring Schemes and Analysis over Shared Operating Frequency Bands - 01 July 2019

JTE20170309: MRI Images Segmentation and 3D Reconstruction for Cerebral Cancer Detection - 01 November 2018

JTE20160388: Nondestructive Evaluation of Solid Pharmaceutical Products Using Wavelet Transformations and Multispectral Data - 01 July 2018

JTE20170268: A Novel Approach to Evaluating the Performance of Physical Fitness by Combining Statistical Inference with the Radar Chart - 01 July 2018

JTE20170345: Studying the Statistics of Natural X-ray Pictures - 01 July 2018

JTE20160411: Enhanced Artificial Bee Colony Algorithm for Liver Cancer Analysis - 01 May 2018

JTE20160485: Analytical Performance Test of Pancreas Cancer miRNA Chip - 01 May 2018

JTE20160271: Tele Alert System for Epileptic Seizure on a Study of EEG Signal Classification by GBE-NLSVM through ICA Preprocessed and AR Extracted Signal in a BCI System - 01 March 2018

JTE20160410: Evaluating Various Lung Cancer Nodule Detection Techniques—A Comparative Study - 01 March 2018

JTE20160424: A Sustainability Strategy Assessment Framework Model for Medical Tourism Supply Chain in Asia - 01 March 2018

JTE20160336: Physiological Information for Pavement Ride Quality Verification - 01 January 2018

JTE20160214: Fully Automated Active Contour Model Based Approach for Segmentation of Common Carotid Artery Using Ultrasound Images - 01 November 2017

JTE20160216: Comprehensive Analysis of Performance Data for Energized Vessel Sealing Devices - 01 September 2017

JTE20140444: A Longitudinal Study of Identifying Critical Factors of Patient Safety Culture in Taiwan - 01 May 2017

MPC20150071: Duplex Titanium Oxide Layers for Biomedical Applications - 15 December 2016

MPC20150053: Statistical Modeling of High Cycle Fatigue with Censored Data - 06 December 2016

JTE20150082: Determination of the Reliability of Guidewires' Visibility Measurement - 01 November 2016

JTE20140319: New Algorithm of Similarity Measures for Pattern-Recognition Problems - 01 July 2016

JTE20140233: Comparison of Two Histological Test Methods for the Measurement of Thermal Spread Associated With Energized Vessel Sealing - 01 May 2016

JTE20150032: Using Systematic Innovation Process to Improve the Manufacturing Technology of Platelet Agitators - 01 May 2016

JTE20140015: Assessment of Physiological Load Testing of Total Knee Implants - 01 January 2016

JTE20130283: Failure Mode of Pedicle Screw Fixation Depends Upon the Presence, Absence, and Position of Interbody Spacers. A Pilot Study - 01 November 2015

JTE20140120: An Importance-Performance Analysis of Human Factors for Patient Safety Management Strategy - 01 November 2015

JTE20140084: Ambulance Service Area Considering Disaster-Induced Disturbance on the Transportation Infrastructure - 01 March 2015

JTE20130242: Mechanical Properties of Epoxy Resin/PMMA/SiO2 Dental Composites - 01 January 2015

JTE20130248: Evaluation of Super-Resolution Methods for Magnetic Resonance Images - 01 November 2014

MPC20130069: Application of Elastic-Plastic Fracture Mechanics to Determine the Locational Variation in Fracture Properties of Cortical Bone - 20 September 2014

JTE20120362: Implementation and Use of Feasibility Assessment of Biometric Locker System for Swimmers - 01 November 2013

JTE20120169: Evaluation of Adult Body Adiposity, Size, and Shape by Stereovision Imaging - 01 January 2013

JTE104136: The Development and Evaluation of Blood Volume Measuring System for Blood Culture Quality Improvement - 01 July 2012

JAI103444: Laboratory Evaluation Method for the Functional Performance of Total Knee Replacements - 01 April 2012

JAI104511: Common Mechanisms of Hip Injury and Associated Hip Pathology in Professional Skiers and Snowboarders - 01 April 2012

JAI103503: ASTM F2624-07—Evaluating an Alternate Fixture for Testing Extra Discal Motion Preserving Implants - 01 March 2012

JTE103841: The Assessment of Hand Volume Using a Modified Volumetric Technique - 01 March 2012

JAI103130: Early Instability with Mobile Bearing Total Knee Arthroplasty: A Series of Twenty-Five Cases - 01 February 2012

JAI103329: 31 Year Evolution of the Rotating-Platform Total Knee Replacment: Coping With “Spinout” and Wear - 01 February 2012

JAI103493: Vertebrectomy Model for the Mechanical Assessment of Fusionless Scoliosis Growth Rods - 01 February 2012

JAI103496: Kinematic Stability Evaluation of Spinal Fusion Devices by Synthetic FSU Model - 01 February 2012

JAI103497: Wear Simulation of Total Disc Arthroplasties: Sensitivity to Device Design and Test Parameters - 01 February 2012

JAI103500: The Use of a Single-Level Construct Model to Evaluate Nonmetallic “Flexible” Rods - 01 February 2012

JAI103502: Symposium on Static and Dynamic Spinal Implants: Are We Evaluating Them Appropriately? Effect of Tightening Torque on ASTM F1798 Axial Gripping Capacity - 01 February 2012

JAI103505: A Method to Test Anterior-Posterior Construct Shear Fatigue Based on the Vertebrectomy Model - 01 February 2012

JAI103510: ASTM F2624—Evaluating Alternate Fixtures for Flexion/Extention, Lateral Bending, and Axial Rotation Testing of Extra Discal Motion Preserving Implants - 01 February 2012

JAI103537: Rationale of a Test Setup with a Defined COR for Extra-Discal Motion-Preserving Implants with a Low Implant Stiffness - 01 February 2012

JAI103630: Clinical Results of a Total Knee Prosthesis with Floating Platform at 5.5 Years - 01 February 2012

JAI104299: Standard Testing Methods for Mobile Bearing Knees - 01 February 2012

JAI104453: Wear of Mobile Bearing Knees: Is It Necessarily Less? - 01 February 2012

JAI103498: Comparison of Two Bone Surrogates for Interbody Device Subsidence Testing - 01 January 2012

JAI103522: Comparison of Daily Motion of the Cervical and Lumbar Spine to ASTM F2423-11 and ISO 18192-1.2011 Standard Testing - 01 January 2012

JAI103907: In-Vitro Wear and Radiographic Analyses of High Flexion Posterior Stabilized Mobile- and Fixed-Bearing Knee Implants - 01 January 2012

JAI103924: FEM Analysis of a DCP Implant on a Human Femoral Bone With a Fracture Gap - 01 January 2012

JAI104266: Mobility and Contact Mechanics of a Rotating Platform Total Knee Replacement - 01 January 2012

JAI103562: Primary Stability of a Dynamic Artificial Disc Tested in a Human Cadaveric Model - 01 November 2011

JAI103725: The Incidence of Anterior Knee Pain and Crepitation After Total Knee Replacement: A Matched Pair Analysis between Rotating Platform and Fixed Bearing Posterior Stabilized Designs - 01 November 2011

JAI104180: Utilizing Validated Computational Models to Predict Tibial Insert Abrasion in Mobile Bearing Knees: A Design Performance Standard - 01 November 2011

JTE103346: Analysis of Loss of Torque in Dental Implants Containing Gold Washers between Implant and Screw Head - 01 November 2011

JAI103492: Static Evaluation of Pedicle Screw Spinal Constructs to the ASTM Standard: A Comparison of Multiple Test Laboratories - 01 October 2011

JAI103495: Development of a More Physiological Loading Protocol for Spine In Vitro Flexibility Testing - 01 October 2011

JAI103408: Biomechanical Cyclical Loading on Cadaveric Cervical Spines in a Corpectomy Model - 01 July 2011

JAI103499: Comparison of Self-Drilling and Self-Tapping Cervical Spine Screws Using ASTM F543-07 - 01 July 2011

JAI103501: Symposium on Static and Dynamic Spinal Implants: Are We Evaluating Them Appropriately? - 01 July 2011

JAI103513: Fixture Variations When Evaluating ASTM F1717 Construct Stiffness: Pin Diameter and Material - 01 July 2011

JTE103120: Mechanical Test Methods for Assessing Porcine Carotid and Uterine Artery Burst Pressure Following Ex Vivo Ultrasonic Ligature Seal and Transection - 01 July 2011

JAI103161: Systematic Review of Complications in TKA Mobile Bearing Knees - 01 June 2011

JAI103453: Screening of Spill and Leakage of Antibiotics in Hospital Wards - 01 June 2011

JAI103494: How Frequency Affects Fatigue Testing of an Artificial Disc With a Viscoelastic Polymer Core - 01 June 2011

JAI103678: Review of Standards for Surface and Dermal Sampling - 01 June 2011

JAI103304: In Vitro Knee Wear, Kinematics, and Particle Morphology Among Different Bearing Geometries in a Mobile Bearing Knee System - 01 May 2011

JAI103556: Derivation of Clinically Relevant Boundary Conditions Suitable for Evaluation of Chronic Impingement of Lumbar Total Disk Replacement: Application to Standard Development - 01 May 2011

JAI103105: The Contribution of Mobile Bearing Knee Design in Optimizing Tibial Rotation in Total Knee Arthroplasty - 01 April 2011

JAI103166: Wear Rate in a Series of Retrieved RP Knee Bearings - 01 March 2011

JAI103167: Wear Advantage of a Rotating Bearing Knee–An In Vitro Study - 01 March 2011

JAI103098: Spectrophotometric Determination of Iron in Pharmaceutical and Water Samples by Interacting with 5-(4-Nitrophenylazo) Salicylic Acid and Eosin - 01 February 2011

JAI103164: Damage and Wear: An Important Distinction in Rotating Platform Knee Bearings - 01 February 2011

JAI103168: Comparison of Mobile Bearing and Fixed Bearing Total Knee Arthroplasty Outcomes: A Review of the Literature - 01 February 2011

JAI103328: Wear of a Mobile Bearing Uni-Compartmental Knee Replacement Prosthesis: A Comparison of In Vitro and In Vivo Wear Rates - 01 February 2011

JTE102555: Evaluating the Optimal City in South China for New Medical Facilities: The Application Modified Porter’s Diamond Framework - 01 July 2010

JAI102923: Resistance of protective gloves materials to puncture by medical needles - 01 May 2010

JTE102405: A Testing and Evaluation Model for the Electrocardiogram Variation Application - 01 March 2010

JAI101873: A Methodology for Quantifying Deformations in Stented Coronary Arteries Based on Three-Dimensional Angiography - 01 January 2010

JAI102204: Active Surveillance Systems for Early Detection and Improved Recall Decision Making - 01 November 2009

JAI102293: Identification and Quantification of Combustion Products Released by Non-Metallic Materials Used for Medical Oxygen Equipment - 01 November 2009

JAI102296: Oxygen Fire Hazards in Valve-Integrated Pressure Regulators for Medical Oxygen - 01 November 2009

JAI102018: Acute Care in Cervical Spinal Cord Trauma with Long-Term Benefit: A Review - 01 October 2009

JAI102324: In-Vitro Modeling of the Dynamic Forces in the Femoropopliteal Artery - 01 October 2009

JAI102400: Crystallographic Study of Superelastic Deformation of Nitinol - 01 October 2009

JAI102195: An Investigation of Factors Impacting Nitinol Wire Fatigue Life - 01 September 2009

JAI102392: Drug Delivery Properties of Six Nebulizer Systems - 01 July 2009

JAI102412: Fatigue to Fracture: An Informative, Fast, and Reliable Approach for Assessing Medical Implant Durability - 01 July 2009

JAI101879: Review of Multiaxis Fatigue Testing for Fatigue/Durability of Cardiovascular Medical Devices - 01 June 2009

JAI101872: Feasibility of a Method to Quantify Movement-Induced Conformational Changes in the Superficial Femoral and Popliteal (Femoropopliteal) Arterial Tree Using 3-D Angiography - 01 April 2009

JTE102109: Indentation Measurements on Compacted Pharmaceutical Powders: Establishing the Sources of Variation in White Light Interferometer Dent Measurements - 01 March 2009

JAI101581: Dilatometric Analysis for Investigating Age Hardening in a Commercial Precious Metal Dental Alloy - 01 February 2009

JAI101874: Full-Field Measurements of Fracture Initiation and Crack Growth in Superelastic Nitinol - 01 February 2009

JAI101853: Hydrogen-Related Degradation of Mechanical Properties of Titanium and Titanium Alloys - 01 January 2009

JAI102074: A Review of Peripheral Vascular Deformations due to Respiration and Musculoskeletal Influences - 01 November 2008

JTE101053: Medical Image Semi-fragile Watermarking in the Frequential Field - 01 November 2008

JAI100865: A Form to Follow Function: Recladding A Regional Healthcare Facility - 01 July 2008

JAI101567: An Examination of Fatigue Initiation Mechanisms in Thin 35Co-35Ni-20Cr-10Mo Medical Grade Wires - 01 July 2008

JAI101717: A Human Factors Evaluation of Stethoscopes - 01 June 2008

JTE100170: Evaluation of Austenitic-Ferritic Stainless Steel Wires for Orthodontic Applications - 01 March 2008

JAI101452: Analysis of Endotoxin Residues on Cleaned Implant Materials - 01 February 2008

JAI101364: Influence of Medical Needle Characteristics on the Resistance to Puncture of Protective Glove Materials - 01 January 2008

JTE100598: Methodology for Evaluating Candidate Geometric Reference Scaffolds - 01 November 2007

JAI100645: Martensite Transformations and Fatigue Behavior of Nitinol - 01 July 2007

JTE100869: A New Methodology for Whole-Package Microbial Challenge Testing for Medical Device Trays - 01 July 2007

JAI100390: Characterizing Fatigue Response of Nickel-Titanium Alloys by Rotary Beam Testing - 01 June 2007

JTE100477: Methodology of Lifetime Predictionqa in Polymer Aging - 00 May 2007

JAI100657: Effects of Phase Transformations on Fatigue Endurance of a Superelastic NiTi Alloy - 00 March 2007

JAI100248: Effects of Patient and Surgical Alignment Variables on Kinematics in TKR Simulation Under Force-Control - 01 November 2006

JTE100041: Performance Evaluation of PLA against Existing PET and PS Containers - 01 November 2006

JTE100062: An Efficient DCT-Based Cryptocompression Scheme for a Secure and Authentic Medical Image Transmission - 01 November 2006

JAI100249: Wear Scar Prediction Based on Wear Simulator Input Data—A Preliminary Artificial Neural Network Approach - 01 October 2006

JAI100253: A Tracer Method to Determine Extremely Low Wear Rates of Ultrahigh Molecular Weight Polyethylene - 01 October 2006

JAI100374: Thermoelastic Transformation Behavior of Nitinol - 01 October 2006

JAI100388: Experimental Studies of NiTi Self-expanding Stent Designs - 01 October 2006

JAI100391: Verification of Strain Level Calculations in Nitinol Fatigue Resistance Predictions - 01 October 2006

JAI100428: Basics of Polymeric Scaffolds for Tissue Engineering - 01 October 2006

JAI100496: The Effects of Load Soak Control on the Wear of UHMWPE at Various Hydration Levels in a Joint Simulation Study - 01 October 2006

JAI100251: A Simulator Study of TKR Kinematics Using Modeled Soft-Tissue Constraint: Virtual Soft-Tissue Control for Knee Simulation - 01 September 2006

JAI100255: Load Profile and Fluid Composition Influence the Soak Behavior of UHMWPE Implants - 01 September 2006

JAI100257: Differences of the Mechanical Setup of Hip Simulators and Their Consequences on the Outcome of Hip Wear Testing - 01 September 2006

JAI13886: Industrial Cleaning of Implants: Performance Validation of Cleaning Scheme - 01 September 2006

JAI100250: Slip Velocity Direction Impacts Wear in Total Knee Arthropolasty - 01 July 2006

JAI100259: Computational Wear Prediction of UHMWPE in Knee Replacements - 01 July 2006

JAI13432: A Beam-Monitor System for Neutrons and Gamma Rays in the Medical Irradiation Facility of the Kyoto University Research Reactor - 01 July 2006

JAI13475: Radiation Dosimetry in the BNCT Patient Treatment Room at the Brookhaven Medical Research Reactor - 01 July 2006

JAI13542: ASTM G 175 Interlaboratory Study on Forced Ignition Testing - 01 July 2006

JAI100252: Retrieval Analysis of Total Disc Replacements: Implications for Standardized Wear Testing - 01 June 2006

JAI100384: FDA Recommendations for Nitinol Stent and Endovascular Graft Fatigue Characterization and Fracture Reporting - 01 June 2006

JAI100558: Estimation of the Osteolytic Potential of Noncrosslinked and Crosslinked Polyethylenes and Ceramic-on-Ceramic Total Hip Prostheses - 01 June 2006

JAI13581: Prediction of Failure in Existing Heart Valve Designs - 01 June 2006

JAI14178: The Effects of Implant Temperature on Lubricant Protein Precipitation and Polyethylene Wear in Joint Simulation Studies - 01 June 2006

JAI100504: Comparison of the Corrosion Fatigue Characteristics of 23Mn-21Cr-1Mo Low Nickel, 22Cr-13Ni-5Mn, and 18Cr-14Ni-2.5Mo Stainless Steels - 01 May 2006

JAI13390: Residue Analysis on Implants - 01 May 2006

JAI13392: Validation of a Gravimetric Procedure for Recovery of Processing Materials from Porous Coated Metal Implants - 01 May 2006

JAI13580: Application of Low Plasticity Burnishing (LPB) to Improve the Fatigue Performance of Ti-6Al-4V Femoral Hip Stems - 01 May 2006

JTE100121: High Frequency Dynamic Testing of Rubbers and Rubber to Metal Devices - 01 May 2006

JAI13387: Parameters in Ultrasonic Cleaning for Implants and Other Critical Devices - 01 April 2006

JAI13574: The Oxygen Index of Surgical Drape Materials - 01 April 2006

JAI14173: Surface Texture Analysis of Artificial Disks Wear-Tested under Different Conditions and Comparison to a Retrieved Implant - 01 April 2006

JAI13384: Plasma Cleaning of a Commercially Available Hydroxyapatite-Coated External Fixation Pin by the Radio Frequency Glow Discharge Technique - 01 March 2006

JAI13393: Analytical Methods and Acceptance Criteria for Cleaning Validation Protocols for Medical Devices - 01 March 2006

JAI13394: Survey of Orthopedic Implant Cleanliness Test Methods - 01 March 2006

JAI13885: Radio Frequency Plasma Treatment of PEEK Spinal Implants - 01 March 2006

JAI13389: ASTM Activities for Assessing Cleanliness of Medical Devices - 01 February 2006

JAI13391: Cleanliness Testing and Identification of Residues on Polymer Medical Devices - 01 February 2006

JAI13891: The Case for a Voluntary National Healthcare Identifier - 01 February 2006

JAI12817: Zirconium and Niobium Affect Human Osteoblasts, Fibroblasts, and Lymphocytes in a Similar Manner to More Traditional Implant Alloy Metals - 01 January 2006

JAI12777: Metallurgical Attachment of a Porous Tantalum Foam to a Titanium Substrate for Orthopedic Applications - 01 November 2005

JAI12810: Corrosion of Modular Titanium Alloy Stems in Cementless Hip Replacement - 01 November 2005

JAI12779: Beta Titanium Alloy Processed for High Strength Orthopedic Applications - 01 October 2005

JAI12783: Corrosion Resistance, Mechanical Properties, Fatigue Properties, and Tissue Response of Ti-15Zr-4Nb-4Ta Alloy - 01 October 2005

JAI12785: Comparison of Stress Corrosion Cracking Characteristics of CP Ti, Ti-6Al-7Nb, Ti-6Al-4V, and Ti-15Mo - 01 October 2005

JAI13084: Comparative Evaluations of Surface Characteristics of cp Titanium, Ti-6AI-4V and Ti-15Mo-2.8Nb-0.2Si (Timetal® 21SRx) - 01 October 2005

JAI12774: Mechanical and Physical Properties of Titanium-12Molybdenum-6Zirconium-2Iron Beta Titanium Alloy - 01 September 2005

JAI12776: Influence of Oxygen Content on the Mechanical Properties of Titanium-35Niobium-7Zirconium-5Tantalum Beta Titanium Alloy - 01 September 2005

JAI12780: Effect of Aging Treatments on the Tensile Properties of Ti-35Nb-7Zr-5Ta-(0.06–0.7)O Alloys - 01 September 2005

JAI13033: The Application of Ti-15Mo Beta Titanium Alloy in High Strength Structural Orthopaedic Applications - 01 September 2005

JAI14124: Biocomposites: Exploring Surface Texture for Cell Adhesion - 01 September 2005

JTE12481: Medical Image Denoising Using Wavelet Thresholding - 01 September 2005

JAI12775: Creation of Oxidized Zirconium Orthopaedic Implants - 01 July 2005

JAI12782: Effect of Surface Reaction Layer on Three-Point Flexure Bond Strength of Resin Composite to Cast Ti and Ti-6Al-7Nb - 01 July 2005

JAI12786: Comparison of the Corrosion Fatigue Characteristics of CP Ti-Grade 4, Ti-6Al-4V ELI, Ti-6Al-7Nb, and Ti-15Mo - 01 July 2005

JAI12790: Use of a TG/DTA/Raman System to Monitor Dehydration and Phase Conversions - 01 July 2005

JAI12809: Comparison of Stress Corrosion Cracking and Corrosion Fatigue (Anodized and Non-Anodized Grade 4 CP Ti) - 01 July 2005

JAI12812: Influence of Exposure Conditions on Bacterial Adhesion to Zirconium Alloys - 01 July 2005

JAI12814: A Methodology to Fabricate Titanium and Stainless Steel Wear Debris for Experimental Use: A Comparison of Size, Shape, and Chemistry - 01 July 2005

JAI13105: Fatigue Testing of Bone Cements — Comparison of Testing Arrangements - 01 July 2005

JAI12781: Mechanical Properties of Cast Ti-Fe-O-N Alloys - 01 June 2005

JAI12818: Super Elastic Functional β Titanium Alloy with Low Young's Modulus for Biomedical Applications - 01 June 2005

JAI12894: Understanding Polymeric Pads in Pre-CMP Conditioning - 01 May 2005

JAI12199: Validated Microstructural Assessment of Femoral Heads - 01 May 2004

JAI11202: Generalized Size and Shape Description of UHMWPE Wear Debris — A Comparison of Cross-Linked, Enhanced Fused, and Standard Polyethylene Particles - 01 January 2004

JAI11207: Development of a Model for Testing Third Body Wear of UHMWPE Acetabular Components - 01 January 2004

JAI11217: The Effects of Raw Material, Irradiation Dose, and Irradiation Source on Crosslinking of UHMWPE - 01 January 2004

JAI11218: Multiaxial Fatigue Behavior of Oxidized and Unoxidized UHMWPE During Cyclic Small Punch Testing at Body Temperature - 01 January 2004

JAI11510: Measurement of Pore Size and Porosity of Tissue Scaffolds - 01 January 2004

JAI11515: Is There a Need for TEMP Standards? A Perspective from a Biomaterials Manufacturer - 01 January 2004

JAI11517: Biomolecules in Tissue Engineered Medical Products (TEMPs): A Case Study of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) - 01 January 2004

JAI11593: Wear and Structural Fatigue Simulation of Crosslinked Ultra-High Molecular Weight Polyethylene for Hip and Knee Bearing Applications - 01 January 2004

JAI11624: Comparative Study of Bone Cell Culture Methods for Tissue Engineering Applications - 01 January 2004

JTE12372J: A Method for Assessing the Durability of Medical Examination Gloves - 01 November 2003

JTE12363J: Review and Evaluation of Medical Image Segmentation Using Methods of Optimal Filtering - 01 September 2003

JTE12332J: The Effect of Simulated Clinical Use on Vinyl and Latex Exam Glove Durability - 01 September 2002

JTE12404J: Evaluation of Powdered Latex Medical Gloves Using ASTM D 6124-00 - 01 November 2001

JTE12122J: Cyclic Loading and Creep of Intracranial Aneurysm Clips - 01 September 2000

JTE12117J: Evaluation of Three Methodologies for Testing Disposable ENT Endoscope Sheaths as Viral Barriers - 01 November 1998

JTE12692J: The Modified Sudden Death Test: Planning Life Tests with a Limited Number of Test Positions - 01 September 1998

JTE11499J: Experiments Increase Understanding of Chronic Obstructive Lung Disease - 01 November 1997

JTE11485J: The Significance of Nonlinear Motion in the Wear Screening of Orthopaedic Implant Materials - 01 March 1997

JTE12680J: Titanium Cerebral Aneurysm Clips: Characterization and Performance in Magnetic Resonance Imaging and Computed Tomography - 01 March 1996

JTE10433J: Stiffening Effects of Photoelastic Coatings on Orthotropic Plates - 01 July 1995

JTE10412J: A New Technique for Fracture Characterization of Ceramics at Room and at High Temperature - 01 May 1995

JTE12661J: A Differential Air Deflation Quality Assurance Test for Surgical Gloves - 01 September 1994

JTE12668J: Wear Analysis of Björk Shiley Delrin Tilting Disc Heart Valves - 01 September 1994

CTR10402J: Prediction of Fatigue Life of Composite Femoral Prostheses Using Acoustic Emission Technique - 01 April 1994

JTE11714J: Introduction to Symposium on the Use and Performance of Staples in the Human Body - 01 May 1992

JTE11715J: Mechanical Testing of Stainless Steel Bone Staples - 01 May 1992

JTE11716J: Use of Pneumatically Driven Staples in the Practice of Orthopaedic Surgery - 01 May 1992

JTE11717J: Comparison of Materials for Staple Pull-Out Tests - 01 May 1992

JTE12516J: AIDS and Intravenous Drug Use: Future Directions for Community-Based Prevention Research - 01 November 1990

JTE12517J: Handbook of Environmental Fate and Exposure Data for Organic Chemicals - 01 November 1990

JTE12465J: Historical Overview of Femoral Intramedullary Nailing - 01 March 1990

CTR10436J: The Challenge and Opportunity for Composites in Structural Orthopaedic Applications - 01 December 1987

JTE10549J: Standards for In-Vitro and In-Vivo Comparison and Qualification of Bioabsorbable Polymers - 01 September 1977

JTE11636J: Problems in Standardization of Implantable Stimulation Electrodes - 01 May 1977

JTE10106J: A Note on Selecting the Better Material in a Paired Comparison Test Program - 01 July 1974

JTE10099J: Design and Analysis of Corrosion Experiments for Testing Materials Exposed to Gamma Radiation - 01 May 1974