All Chemicals Special Technical Publications

Search within Chemicals


STP157320130101: Performance Comparison of Non-Aqueous Fire-Resistant Hydraulic Fluids - 31 July 2014

STP155920120212: Fracture Toughness and Fatigue Crack Propagation Determination of Metal Matrix Composite Materials - 30 September 2013

STP1558104616: Novel Lipophilic Surfactant Adjuvants for Spray-Drift Reduction - 01 March 2013

STP155820120065: A Method for Quantifying Release of Terbufos into Water from Granular Carriers - 01 March 2013

STP1558104564: ASTM Standard Terminology Related to Biorationals - 01 March 2013

STP1558104651: Genetically Modified Crops and the New Paradigm for Herbicide Use in Row Crops - 01 March 2013

STP155820120064: Controlled Release of 2,4-D and Dicamba 3-hydroxybutyric Acid Oligomers - 01 March 2013

STP104310: Spray Droplet Size Affects Efficacy of Fenpropathrin Against Asian Citrus Psyllid - 01 March 2013

STP155820120057: A Novel Penetrator Adjuvant with Drift Reduction Properties - 01 March 2013

STP1558104566: Efficacy of Acidic Ammonium Sulfate Replacement Adjuvants - 01 March 2013

STP155820120056: Manganese Containing Water Conditioners for Use with Glyphosate in Glyphosate-Resistant Soybean - 01 March 2013

STP155820120066: A Novel Rheology Modifier for Agrochemical Formulations - 01 March 2013

STP155820120079: Enlist Duo Herbicide: A Novel 2,4-D Plus Glyphosate Premix Formulation with Low Potential for Off-target Movement - 01 March 2013

STP104278: Droplet Characteristics and Near Nozzle Dispersion of Cold and Thermal Fog - 01 March 2013

STP104454: Determination of Selection Criteria for Spray Drift Reduction from Atomization Data - 01 March 2013

STP104451: Effects of Formulated Glyphosate and Adjuvant Tank Mixes on Atomization from Aerial Application Flat Fan Nozzles - 01 March 2013

STP104403: Wind Tunnel and Field Evaluation of Drift from Aerial Spray Applications with Multiple Spray Formulations - 01 March 2013

STP103980: (U)HMWPE as Neutron Radiation Shielding Materials: Impact of Gamma Radiation on Structure and Properties - 01 January 2013

STP104141: Atomistic Investigations of Intrinsic and Extrinsic Point Defects in bcc Uranium - 01 January 2013

STP104451T: Effects of Formulated Glyphosate and Adjuvant Tank Mixes on Atomization from Aerial Application Flat Fan Nozzles - 30 November 2012

STP104483: Protective Clothing for Pesticide Operators: The Past, Present, and Proposed Plans - 01 October 2012

STP1545-EB: Durability of Building and Construction Sealants and Adhesives: 4th Volume - 01 July 2012

STP1534-EB: Film and Nucleate Boiling Processes - 01 February 2012

JAI103368: Polyalkylene Glycols as Next Generation Engine Oils - 01 January 2012

STP1537-EB: Pesticide Formulations and Delivery Systems, 31st Volume: Innovative Green Chemistries for the 21st Century - 01 December 2011

STP1537-EB: Pesticide Formulations and Delivery Systems, 31st Volume: Innovative Green Chemistries for the 21st Century - 01 December 2011

STP1527-EB: Pesticide Formulations and Delivery Systems, 30th Volume: Regulations and Innovation - 01 February 2011

STP49374S: Immobilization of Cellulase and Hemicellulases on Porous Glass Beads - 01 January 2011

STP49375S: Review of Key Research Efforts to Make Algae Fuels Sustainable - 01 January 2011

STP49501S: A Brief History of the Development and Growth of the Corrugated Polyethylene Pipe Industry in North America - 01 January 2011

STP49748S: Beryllium Measurement by Optical Fluorescence in Samples Contaminated by Strongly Fluorescent Impurities - 01 January 2011

STP49753S: Developing Acceptable Surface Limits for Occupational Exposure to Pharmaceutical Substances - 01 January 2011

STP49756S: Application of ASTM Standard Practice D6602 in the Investigation of Outdoor Environmental Surface Particulate Including Darkening Agents - 01 January 2011

STP49758S: Use of Direct Reading Surface Sampling Methods for Site Characterization and Remediation of Methamphetamine Contaminated Properties - 01 January 2011

STP49559T: Measuring Properties for Material Decomposition Modeling - 01 April 2010

STP48965S: Effects of Water Immersion on Building and Civil Engineering Joints and the Use of the Arrhenius Method in Predicting Adhesion Lifetime of Water-Immersed Joints - 01 January 2010

STP1514-EB: Durability of Building and Construction Sealants and Adhesives: 3rd Volume - 01 January 2010

STP48966S: Experimental Evaluation of Ultraviolet and Visible Light Curing Acrylates for Use in Glass Structures - 01 January 2010

STP48967S: Relative Resistance of Silicone and Si-Hybrid Based Sealants to Alternating Periods of Accelerated Weathering and Thermo-Mechanical Movements - 01 January 2010

STP48961S: Joint Sealing Systems for Pavements—A New Approach towards a Performance Related Evaluation of Capability and Durability - 01 January 2010

STP48968S: Evaluation of the Durability Potential of Silyl Terminated Polyacrylate Based Construction Sealant - 01 January 2010

STP48969S: Substrate Durability Guidelines Used in Silicone Structural Attachment - 01 January 2010

STP48970S: Adhesion Development of Organic and Silicone Sealants on Wet and Dry Concrete - 01 January 2010

STP48971S: Cleaning Silicone Residue from Glass - 01 January 2010

STP48972S: Resistance of Adhesive Bonding of Ultra-High Performance Concrete to Hygrothermal, Corrosive, and Freeze-Thaw Cycling Environments - 01 January 2010

STP48973S: Durability by Design: New Results on Load-Carrying Silicone Bonding - 01 January 2010

STP48974S: Evaluation of Silicone Sealants at High Movement Rates Relevant to Bomb Mitigating Window and Curtainwall Design - 01 January 2010

STP48975S: Quantification of Effect of Enforced Cyclic Movement and Regional Exposure Factors on Weatherability of Construction Sealants - 01 January 2010

STP48976S: Using Rheology Test Methods to Assess Durability of Cured Elastomers Undergoing Cyclic Deformation - 01 January 2010

STP48977S: Effect of Strain on the Modulus of Sealants Exposed to the Outdoors - 01 January 2010

STP48978S: Development of Accelerated Aging Test Methodology and Specimen for Bonded CFRP Systems - 01 January 2010

STP48979S: Water Penetration of Cladding Components—Results from Laboratory Tests on Simulated Sealed Vertical and Horizontal Joints of Wall Cladding - 01 January 2010

STP48962S: Long-Term Outdoor Weathering Study of Construction Sealants - 01 January 2010

STP48980S: Field Performance and Accelerated Weathering of High Performance Acrylic and Polyurethane Sealants for Tilt-Up Applications - 01 January 2010

STP48960S: An Attempt at Finding a Correlation between Environmental and Accelerated RILEM TC 139-DBS Weathering for One-Component Polyurethane Sealants Applied on Mortar - 01 January 2010

STP48963S: Selective Review of Weathering Tests for Sealants and Thoughts on the Development of Novel Test Concept Based on Simultaneous Weathering and Movement - 01 January 2010

STP48964S: New Weathering Test Method for Sealants and Preliminary Experimental Results - 01 January 2010

STP49190S: A Complete System for Testing and Evaluation of Quenchants and Quenching Systems - 01 January 2010

STP48707S: Comparison of ASTM and CIPAC Suspension Methods - 01 January 2009

STP1507-EB: Pesticide Formulations and Delivery Systems, 28th Volume: Global Trends and Regulatory Drivers in the Crop Protection Industry - 01 January 2009

STP48701S: Fungicides Associated with Two Adjuvant Formulations for Preventive and Curative Soybean Rust Control - 01 January 2009

STP48709S: Investigating the Use of Hydrocarbon Fluids in Seed Treatment Formulations - 01 January 2009

STP48710S: Morpholine Amide Solvent: A New Inert - 01 January 2009

STP48702S: A Unique Formulation of Glyphosate in the Acid Form - 01 January 2009

STP48703S: Development of a Multimedia Model for the Fate Prediction of Hydrocarbon Fluids in Agrochemical Formulations - 01 January 2009

STP48700S: Novel Delivery Systems for Integrated Pest Management - 01 January 2009

STP48704S: Assessment of the Ozone Formation Potential from Pesticide Solvents Using a Mobile Ozone Chamber Assay Approach - 01 January 2009

STP48705S: Collection Efficiencies of Various Airborne Spray Flux Samplers Used in Aerial Application Research - 01 January 2009

STP48706S: Evaporation of Pesticide Droplets on Surfaces under Various Relative Humidity Conditions - 01 January 2009

STP48811S: Antifoaming and Defoaming in Agricultural Tank Mixes: Revisiting, Revising, and Reviving a Method - 01 January 2009

STP1520-EB: 29th Symposium on Pesticide Formulations and Delivery Systems - 01 January 2009

STP48812S: Evaluation of a Proposed Drift Reduction Technology High-Speed Wind Tunnel Testing Protocol - 01 January 2009

STP48813S: Development and Testing of a Laboratory Spray Table Methodology to Bioassay Simulated Levels of Aerial Spray Drift - 01 January 2009

STP48814S: Evaluation of the EPA Drift Reduction Technology (DRT) Low-Speed Wind Tunnel Protocol - 01 January 2009

STP48815S: Multiple Metal Cations as Spray Deposit Tracers and Evaluation of the AGDISP Ground Boom Spray Drift Model - 01 January 2009

STP48804S: Glyphosate Weed Control Enhancement with Ammonium Sulfate and Commercial Water Conditioning Agents - 01 January 2009

STP48805S: The Effect of Adjuvants, Pesticide Formulation, and Spray Nozzle Tips on Spray Droplet Size - 01 January 2009

STP48803S: The Influence of Tank Mix Additives While Making Low Volume Aerial Fungicide Applications - 01 January 2009

STP48806S: Imazapyr Absorption and Translocation in Northern Red Oak and Red Maple as Affected by Herbicide Formulation and the Adjuvant Methylated Seed Oil - 01 January 2009

STP48807S: Selection of Sequestering Agents Having Affinity for Calcium Ion for Stabilization of the Emulsifiable Concentrate Formulations - 01 January 2009

STP48808S: A Predictive Solubility Tool for Pesticide Emulsifiable Concentrate Formulations - 01 January 2009

STP48809S: Stabilization of Suspension Concentrate Formulations via Specialized Double-Comb Polymers - 01 January 2009

STP48810S: Effect of Processing Shear Time on EW Formulations - 01 January 2009

STP48828S: Oxygen Compatibility of Brass-Filled PTFE Compared to Commonly Used Fluorinated Polymers for Oxygen Systems - 01 January 2009

STP48829S: Ignition Sensitivity of Nonmetallic Materials in Oxygen-Enriched Air (NITROX): A Never Ending Story in SCUBA Diving? - 01 January 2009

STP48832S: Determination of Time Required for Materials Exposed to Oxygen to Return to Reduced Flammability - 01 January 2009

STP48833S: Effect of Oxygen Concentration on Autogenous Ignition Temperature and Pneumatic Impact Ignitability of Nonmetallic Materials - 01 January 2009

STP48847S: Chlorine Trifluoride Exposure Testing and Oxidizer Reactivity Results - 01 January 2009

STP46601S: Cationic-based Crop Oil Concentrates - 01 January 2008

STP1478-EB: Pesticide Formulations & Delivery Systems, 26th Volume: Reassessing Pesticide Technologies - 01 January 2008

STP46602S: Attapulgite as a Thixotropic Suspending Agent - 01 January 2008

STP46603S: The Effect of Polymeric, Ammonium Sulfate-Based Adjuvants on the Deposition of Glyphosate Spray Solutions - 01 January 2008

STP46604S: Water Conditioner Adjuvant and Fertilizer Formulation Effect on Micronutrient-Glyphosate Tank Mixtures - 01 January 2008

STP46605S: Nozzle-Adjuvant Formulation Interactions: Implications on Herbicide Efficacy - 01 January 2008

STP46600S: Development of an ASTM Method for Measurement of the Extensional Viscosity of Agricultural Spray Solutions - 01 January 2008

STP46606S: Impact of Adjuvants on Droplet Spreading and Droplet Deposit Area After Spray Application - 01 January 2008

STP46607S: Spray Retention Models for Arable Crops - 01 January 2008

STP46608S: Spray Adjuvant Effects on Droplet Size Spectra Measured by Three Laser-Based Systems in a High-Speed Wind Tunnel - 01 January 2008

STP46609S: Wind Tunnel Evaluation of Drift Reduction Potential and Spray Characteristics with Drift Retardants at High Operating Pressure - 01 January 2008

STP45570S: Cavitation Protection Performance of Nitrite-Free Organic Acid Based Coolant for Heavy-Duty Engines - 01 January 2008

STP1491-EB: Engine Coolant Technologies: 5th Volume - 01 January 2008

STP45571S: Accelerated Oxidation and Corrosion Testing of Engine Coolants Using a Rotary Pressure Vessel Oxidation Test - 01 January 2008

STP45572S: Coolants at Elevated Temperatures - 01 January 2008

STP45573S: Comparison of Bench Test Methods to Evaluate Heavy Duty Coolant Thermal Stability - 01 January 2008

STP45562S: Field Test for Carboxylate Inhibitor Levels in OAT Coolants - 01 January 2008

STP45560S: Coolant Development in Asia - 01 January 2008

STP45563S: A Comparison of Membrane Technologies for Engine Coolant Recycling - 01 January 2008

STP45564S: New Electrochemical Methods for the Evaluation of Localized Corrosion in Engine Coolants - 01 January 2008

STP45565S: Compatibility Testing of Multi-Vehicle Coolant Chemistries - 01 January 2008

STP45566S: Investigation of Interaction Between Coolant Formulations and Flux Loading/Compositions in Controlled Atmosphere Brazed (CAB) Aluminum Surfaces in Heat Exchanger Applications - 01 January 2008

STP45567S: Effect of Fluoride on Corrosion of Cooling System Metals in Ethylene Glycol-Based Antifreeze/Coolants - 01 January 2008

STP45568S: Heavy-duty Diesel Engine Cavitation Test - 01 January 2008

STP45561S: Heavy Duty Diesel Engine Coolant Technology: Past, Present, and Future - 01 January 2008

STP45569S: Component Durability and High Mileage Performance of a Full Carboxylate Coolant in Heavy Duty Diesel (HDD) Engines - 01 January 2008

STP47501S: Controlled Release Pellet Formulation - 01 January 2008

STP1500-EB: Pesticide Formulations and Delivery Systems, 27th Volume: Traditional and Non-Traditional Developments - 01 January 2008

STP47502S: Microencapsulated Clomazone: Formulation Stability, Tank Mix Volatility, and Solvent Effects - 01 January 2008

STP47503S: Water Dispersible Granule Formulations Containing a New Defoaming Agent - 01 January 2008

STP47504S: New Polymeric Comb Dispersants for Agricultural Formulations: A Comparison of Performance in Pesticide Suspension Concentrates - 01 January 2008

STP47500S: Development of Fast Dissolving Concentrated Gibberellin Water Soluble Granular Formulations - 01 January 2008

STP47505S: Formulation Performance Improvements with Blends of Alkyl Naphthalene Sulfonate Condensates Plus Lignosulfonates When Compared to Lignosulfonates Alone - 01 January 2008

STP47506S: Glyphosate Adjuvant Formulation with Glycerin - 01 January 2008

STP47507S: New Solvents for Agriculture—A Theoretical Modeling Approach - 01 January 2008

STP47508S: Alkyl-Capped Block Copolymer Surfactants for Remediation of Soil Water Repellency and Heterogeneous Rootzone Moisture - 01 January 2008

STP47509S: Use of a Soil Surfactant with Fungicides for Control of Fairy Ring Disease in Turfgrass - 01 January 2008

STP47510S: Novel Adjuvants for Targeting Pesticide Delivery - 01 January 2008

STP47511S: Fluorescence Imaging as a Non-Invasive Technology to Monitor the Performance of Glyphosate Adjuvants and Formulations - 01 January 2008

STP47512S: Managing Aldicarb Application with GPS/GIS Systems - 01 January 2008

STP1501-EB: Automotive Lubricant Testing and Advanced Additive Development - 01 January 2008

STP45588S: Additive and Base Oil Effects in Automatic Particle Counters - 01 January 2008

STP45589S: Design of Functionalized PAMA Viscosity Modifiers to Reduce Friction and Wear in Lubricating Oils - 01 January 2008

STP45580S: A Review of Engine Oil Oxidation Bench Tests and Their Application in the Screening of New Antioxidant Systems for Low Phosphorus Engine Oils - 01 January 2008

STP45582S: Synergistic Tribological Performances of Borate Additive in Lubricants - 01 January 2008

STP45585S: Mechanochemical Additive-Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces - 01 January 2008

STP45586S: Study of the ZDDP Antiwear Tribofilm Formed on the DLC Coating Using AFM and XPS Techniques - 01 January 2008

STP45230S: A Thermal Analysis Method for Measuring Polymer Flammability - 01 January 2007

STP1466-EB: Techniques in Thermal Analysis: Hyphenated Techniques, Thermal Analysis of the Surface, and Fast Rate Analysis - 01 January 2007

STP45231S: Fast Scan Differential Scanning Calorimetry Distinguishes Melting, Melting-Degradation/Sublimation and Thermal Stability of Drugs - 01 January 2007

STP45232S: Thermal and Oxidative Properties of Physiologically Relevant Free Fatty Acids by Dielectric Analysis and Differential Scanning Calorimetry - 01 January 2007

STP45221S: Development and Evaluation of a TG/DTA/Raman System - 01 January 2007

STP45222S: The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 1: Evaluation of Pure Forms - 01 January 2007

STP45223S: The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 2: Evaluation of Mixed Forms - 01 January 2007

STP45225S: Quantitative Mass Measurements from Mass Spectrometer Trend Data in a TG/MS System - 01 January 2007

STP45226S: Separation of Overlapping Processes from TGA Data and Verification by EGA - 01 January 2007

STP45227S: Characterization of Modified Carbon Nanotubes by TG-MS and Pyrolysis-GC/MS - 01 January 2007

STP45228S: Characterization Of Epoxy Curing Using High Heating Rate DSC - 01 January 2007

STP45229S: Photo Thermal Micro-Spectroscopy — A New Method for Infared Analysis of Materials - 01 January 2007

STP45526S: An Investigation of Specimen Geometry Effects on the Fracture Behavior of a Polytetrafluoroethylene Polymer - 01 January 2007

STP45328S: Correlation Between Strength and Measured Residual Stress in Tempered Glass Products - 01 January 2007

STP45527S: Surface Roughness, Quasi-Static Fracture, and Cyclic Fatigue Effects on GFRP- and CFRP-Concrete Bonded Interfaces - 01 January 2007

STP41030S: Use of Optical Imaging/Image Analysis System for the Quantitative Analysis of Surface Changes Induced by Outdoor Weathering on Sealants - 01 April 2006

STP1488-EB: Durability of Building and Construction Sealants and Adhesives: 2nd Volume - 01 April 2006

STP41031S: Nondestructive Field Testing of Installed Weatherproofing Sealant Joints-Questions and Answers - 01 April 2006

STP41022S: Reducing Tin and Aminosilane Concentration in Silicone Elastomeric Coating to Improve Its Durability - 01 April 2006

STP41023S: Formulating High Weatherability Sealants: Possibilities and Challenges - 01 April 2006

STP41024S: New Durable Sealant of Telechelic Polyacrylate - 01 April 2006

STP41020S: Reducing Modulus of Sealants to Improve Durability - 01 April 2006

STP41025S: Seismic Performance of Two-Side Structural Silicone Glazing Systems - 01 April 2006

STP41026S: Development of a Practical Method to Evaluate the Fatigue Properties of Structural Silicone Glazing Adhesives - 01 April 2006

STP41027S: Standards Development for Impermeable, Constructible, and Durable Waterproofing - 01 April 2006

STP41028S: Study of Weatherability of Construction Sealants with Novel Testing Method - 01 April 2006

STP41029S: Proposed Design and Method for Providing Sealed Joint Performance under Relative Story Displacement - 01 April 2006

STP41021S: Quantification of Differential Thermal Movement in Insulating Glass Edge Seals Using Finite Element Analysis - 01 April 2006

STP37471S: Suitable Adjuvant to Maximize Trifloxysulfuron Efficacy and Early Assessment of Herbicide Efficacy Using Chlorophyll Fluorescence - 01 January 2006

STP1470-EB: Pesticide Formulations and Delivery Systems, 25th Volume: Advances in Crop Protection Technologies - 01 January 2006

STP37472S: Influence of Adjuvants on Weed Control from Tribenuron - 01 January 2006

STP37473S: Improving the Infiltration of Water through Repellent Soils Using Synergistic Surfactant Blends Based on Alkyl Glucosides and Ethylene Oxide-Propylene Oxide Block Copolymers - 01 January 2006

STP37474S: Factors Influencing the Performance of Spray Delivery Systems: A Review of Recent Developments - 01 January 2006

STP37475S: Nozzle Formulation Interactions: Consequences for Spray Droplet Adhesion to Plant Surfaces - 01 January 2006

STP37476S: Field-Collected and AGDISP-Predicted Spray Flux from an Aerial Application - 01 January 2006

STP37477S: Flight Line Variability in Rotary Atomizer Drop Size Distribution - 01 January 2006

STP37478S: Comparisons of Drift Reducing/Deposition Aid Tank Mixes for Fixed Wing Aerial Applications - 01 January 2006

STP37479S: Fluorescent Intensity of Dye Solutions under Different pH Conditions - 01 January 2006

STP37480S: Development and Testing of a Recommendation System to Schedule Copper Sprays for Citrus Disease Control - 01 January 2006

STP37461S: Development of a Dry Applied Dispersible Granular Pesticide Carrier - 01 January 2006

STP37462S: Surfactant-Enhanced Release of Permethrin from a Cellulosic Granular Carrier - 01 January 2006

STP37463S: Use of Carbodiimides as Stabilizing Agents to Deliver Water—Labile Active Ingredients in Liquid Systems Including Aqueous Medium—Amitraz as a Case Study - 01 January 2006

STP37464S: Dearomatized Fluids Used in Phenoxy Herbicides for Right-of-Way Sprays - 01 January 2006

STP37460S: The E35.22 Symposium at 25 Years, Still Growing? - 01 January 2006

STP37465S: Investigation into the Use of Hydroxy-Containing Amides for Oil Flowable Formulations - 01 January 2006

STP37466S: Increasing the Biological Activity of Weak Acid Herbicides by Increasing and Decreasing the pH of the Spray Mixture - 01 January 2006

STP37467S: Influence of Clethodim Formulation and Oil Adjuvants on Weed Control and Overcoming Herbicide Antagonism - 01 January 2006

STP37468S: Characterization of Sulfonated Lignin Dispersants by Hydrophobic Interactive Chromatography - 01 January 2006

STP37469S: Fatty Amine Alkoxylates as Effective Adjuvants for Strobilurin Fungicide Applications on Field and Orchard Crops - 01 January 2006

STP37470S: Ethylenediamine Alkoxylates and Their Use as Adjuvants in Glypliosate Formulations - 01 January 2006

STP40890S: The Effects of Load Soak Control on the Wear of UHMWPE at Various Hydration Levels in a Joint Simulation Study - 01 January 2006

STP40891S: A Tracer Method to Determine Extremely Low Wear Rates of Ultrahigh Molecular Weight Polyethylene - 01 January 2006

STP40887S: Estimation of the Osteolytic Potential of Noncrosslinked and Crosslinked Polyethylenes and Ceramic-on-Ceramic Total Hip Prostheses - 01 January 2006

STP40888S: The Effects of Implant Temperature on Lubricant Protein Precipitation and Polyethylene Wear in Joint Simulation Studies - 01 January 2006

STP40889S: Load Profile and Fluid Composition Influence the Soak Behavior of UHMWPE Implants - 01 January 2006

STP37590S: Plutonium-238 Alpha-Decay Damage Study of A Glass-Bonded Sodalite Ceramic Waste Form - 01 January 2006

STP37592S: Mechanical Properties of Cubic Silicon Carbide after Neutron Irradiation at Elevated Temperatures - 01 January 2006

STP37594S: Tensile, Flexural, and Shear Properties of Neutron Irradiated SiC/SiC Composites with Different Fiber-Matrix Interfaces - 01 January 2006

STP37645S: Oxygen Compatibility Assessment on Components and Systems - 01 January 2006

STP37647S: The Adiabatic Compression Test for Type Approval of Components - History and Final Test Protocol - 01 January 2006

STP37648S: Flow Friction Fire History and Research - 01 January 2006

STP37635S: Ignition of Combustion Modified Polyurethane Foam - 01 January 2006

STP37650S: Ignition of a Composite Cylinder with Plastic Liner - 01 January 2006

STP37636S: Frictional Ignition Testing of Composite Materials - 01 January 2006

STP37659S: Proactive Mitigation of PCTFE-Related Ignition Hazards in Oxygen Systems: I. Development of a Voluntary Consensus Standard Specification to Control Property Variation in Finished PCTFE Parts - 01 January 2006

STP37660S: Proactive Mitigation of PCTFE-Related Ignition Hazards in Oxygen Systems: II. Testing of Inventoried “At-Risk” PCTFE Parts and Hazard Analyses of Corresponding Ground Service Equipment at the Kennedy Space Center - 01 January 2006

STP37661S: Filtration of Gaseous or Liquid Oxygen in Industrial Applications and Associated Fire Risks - 01 January 2006

STP37663S: Mechanical Impact Testing: Data Review and Analysis - 01 January 2006

STP37664S: Materials Compatibility with Nitrogen Trifluoride (NF3) - 01 January 2006

STP37637S: Pneumatic Impact Ignition of Sebum Oil Film in High-Pressure Oxygen - 01 January 2006

STP37665S: Promoted Ignition of a Cylinder Valve in NF3 - 01 January 2006

STP37715S: Durability Testing of Polyurethane Foam Sealant in the Window-Wall Interface - 01 January 2006

STP37760S: Chapter 42: Chemical Admixtures - 01 January 2006

STP11319S: Degradation Parameters and Two-Stress Block Fatigue of Angle-Ply Carbon Fiber Reinforced Epoxy - 01 January 2005

STP11982S: Comparison of Abscission Spray Application Practices for Mechanical Harvesting of Oranges - 01 January 2005

STP11983S: Effect of Adjuvant on the Efficacy of Glyphosate Applied at Different Times of Day - 01 January 2005

STP11984S: A Novel Water Conditioning Adjuvant for Use with Formulated and Nonformulated Glyphosate - 01 January 2005

STP11985S: Evaluation of Some Adjuvants for Improving Glyphosate Efficacy - 01 January 2005

STP11974S: The Effect of Dispersant Solubility, Dispersant Dosage, Granule Diameter, and Dome Versus Radial Extrusion on Granule Spontaneity of Disintegration and Resistance to Attrition - 01 January 2005

STP11975S: Agricultural Granule Particle Size Considerations - 01 January 2005

STP11976S: Fluorescence Imaging for Investigating the Efficiency of Formulations, Adjuvants, and Application Systems - 01 January 2005

STP11972S: Rising to New Challenges in Formulating for Agriculture - 01 January 2005

STP11977S: Improved Formulations through Synergistic Combinations based on Alkyl Glucosides - 01 January 2005

STP11978S: New Value-Added Polymeric Dispersants and Uses Thereof in Agricultural Formulations - 01 January 2005

STP11979S: Applications of Ether Amine Surfactants in Agricultural Formulations: The Known and Unexplored - 01 January 2005

STP11980S: Predicted Deposition Variability Due to Fluctuations in Release Height and Drop Size Distribution - 01 January 2005

STP11981S: Improving the Effectiveness of Aerial Pesticide Sprays - 01 January 2005

STP11973S: Benefits of a 2,4-D Acid Herbicide Formulation - 01 January 2005

STP1463-EB: Advances in Adhesives, Adhesion Science, and Testing - 01 January 2005

STP11663S: Evaluation of Different Techniques for Adhesive Properties of Asphalt-Filler Systems at Interfacial Region - 01 January 2005

STP11664S: New Technique for Measuring Extended Viscosity Ranges — Gel Times, Pot Life, or Cure Monitoring — with Programmable Rotational Viscometers or Rheometers - 01 January 2005

STP11655S: A New Low Cost Method For Measuring the Viscoelastic Behavior of Adhesives - 01 January 2005

STP11654S: Adhesive Bonding and Performance Testing of Bonded Wood Products - 01 January 2005

STP11656S: Method for Quantifying Percentage Wood Failure in Block-Shear Specimens by a Laser Scanning Profilometer - 01 January 2005

STP11657S: SED Method of Measuring Yield Strength of Adhesives and Other Materials - 01 January 2005

STP11658S: Characterizing Dynamic Fracture Behavior of Adhesive Joints under Quasi-Static and impact Loading - 01 January 2005

STP11659S: Interfacial Diffusion of Fluids in Pressure Sensitive Adhesives - 01 January 2005

STP11660S: Advanced Methods of Coating Adhesion Testing - 01 January 2005

STP11661S: Fracture Mechanics Applied to Adhesive Joints - 01 January 2005

STP1460-EB: Pesticide Formulations and Delivery Systems: The Continued Evolution of Agrochemicals, 24th Volume - 01 January 2005

STP11925S: The Sensitivity of Crosslinked UHMWPE to Abrasive Wear: Hips versus Knees - 01 January 2004

STP11926S: Multiaxial Fatigue Behavior of Oxidized and Unoxidized UHMWPE During Cyclic Small Punch Testing at Body Temperature - 01 January 2004

STP11927S: The Effect of Reduced Fracture Toughness on Pitting and Delamination Type Wear of Elevated Cross-Linked Polyethylene - 01 January 2004

STP11929S: The Effect of Aging on Mechanical Properties of Melt-Annealed Highly Crosslinked UHMWPE - 01 January 2004

STP11930S: The Flow Ratio Effect on Oriented, Crosslinked Ultra-High Molecular Weight Polyethylene (UHMWPE) - 01 January 2004

STP11931S: The Effect of Specimen Thickness on the Mechanical Behavior of UHMWPE Characterized by the Small Punch Test - 01 January 2004

STP11919S: Microscopy of Highly Cross-Linked UHMWPE Wear Surfaces - 01 January 2004

STP11932S: The Effects of Raw Material, Irradiation Dose, and Irradiation Source on Crosslinking of UHMWPE - 01 January 2004

STP11933S: Characterization of the Wear Performance of Crosslinked UHMWPE and Relationship to Molding Procedures - 01 January 2004

STP11934S: Influence of Electron Beam Irradiation Dose on the Properties of Crosslinked UHMWPE - 01 January 2004

STP11935S: Development of a Model for Testing Third Body Wear of UHMWPE Acetabular Components - 01 January 2004

STP11936S: Elevated Crosslinking Alone Does Not Explain Polyethylene Wear Resistance - 01 January 2004

STP11920S: Retrieval Analysis of Cross-linked Acetabular Bearings - 01 January 2004

STP11918S: Generalized Size and Shape Description of UHMWPE Wear Debris — A Comparison of Cross-Linked, Enhanced Fused, and Standard Polyethylene Particles - 01 January 2004

STP11921S: Assessment of Surface Roughness and Waviness Using White Light Interferometry for Short-Term Implanted, Highly Crosslinked Acetabular Components - 01 January 2004

STP11922S: Improved Resistance to Wear, Delamination and Posterior Loading Fatigue Damage of Electron Beam Irradiated, Melt-Annealed, Highly Crosslinked UHMWPE Knee Inserts - 01 January 2004

STP11923S: The Effect of Crosslinking UHMWPE on In Vitro Wear Rates of Fixed and Mobile Bearing Knees - 01 January 2004

STP11924S: The Wear of Highly Crosslinked UHMWPE in the Presence of Abrasive Particles: Hip and Knee Simulator Studies - 01 January 2004

STP11262S: Revisiting the Use of SiC as a Post Irradiation Temperature Monitor - 01 January 2004

STP11264S: Mechanical and Structural Property Changes of Monolithic SiC and Advanced SiC/SiC Composites due to Low Temperature He+-Ion Irradiation and Post-Irradiation High Temperature Annealing - 01 January 2004

STP12545S: Portable Slip Testers - 01 January 2004

STP12546S: Managing Slips and Falls: A Legal Perspective - 01 January 2004

STP12547S: A Case History: Refutation of Alleged Floor Maintenance Malpractice by the Application of Forensic Biomechanics - 01 January 2004

STP12548S: Regulatory Issues Affecting Floor Polish - 01 January 2004

STP12540S: The Interaction and Performance of Commercial and Experimental Fluorosurfactants and Commercial Floor Polish - 01 January 2004

STP12541S: Water-Based Acrylic Concrete Seals - 01 January 2004

STP12539S: It's What's on the Inside that Counts - The Chemistry of Floor Polishes - 01 January 2004

STP12542S: Coefficient of Friction - An Overview of Floor Surfaces, Polishes and Maintenance Interaction - 01 January 2004

STP12543S: Polish Maintenance for Fun and Profit - 01 January 2004

STP12544S: The Effect of Polish Maintenance on Static Coefficient of Friction - 01 January 2004

STP11284S: Predicting the Reliability of Ceramics Under Transient Loads and Temperatures with CARES/Life - 01 January 2004

STP12559S: Moisture Conditions of Substrates and Effect on Adhesive Bond of Sealants - 01 January 2004

STP12560S: Silyl-Terminated Polyurethanes for Construction Sealants - 01 January 2004

STP12551S: Lock-Strip Gasket System Retrofit: A Case History - 01 January 2004

STP12561S: Estimation of the Fatigue Resistance of Sealants to Movement at Intersections of Sealed Joints and Improvements in the Joint Design Method - 01 January 2004

STP12562S: Effect of Foam Backer Rod on the Deep Section Cure of One-Part Sealants - 01 January 2004

STP12563S: Effect of Foam Backer Rod on the Mechanical Performance of Sealed Joints - 01 January 2004

STP12564S: Artificial Weathering and Cyclic Movement Test Results Based on the RILEM TC139-DBS Durability Test Method for Construction Sealants - 01 January 2004

STP12565S: Sealant Longevity for Residential Ducts - 01 January 2004

STP12566S: Insights into the Use of Biocides in Silicones Sealants: Test Methods and Durability Aspects - 01 January 2004

STP12552S: Durability by Design: Load Carrying Silicone Bonding, Herz Jesu Church, Munich - 01 January 2004

STP12567S: Effect of Float Glass Surface Composition on Silicone Sealant Adhesion Tested After Simultaneous Exposure to Hot Water and Ultraviolet Light - 01 January 2004

STP12568S: Comparison of Butyl versus Modified Asphalt Window Flashing Adhesives - 01 January 2004

STP12569S: Durability of Horizontal Sealant Joints - 01 January 2004

STP12570S: Durability and Adhesion Rate of One-Part Silicone Sealants to Silicone Rubber Extrusions for New and Remedial Glazing and Weatherproofing Applications - 01 January 2004

STP12571S: Sealant Failure Morphology — The Important Criterion of Equipment Selection for Weathering Studies - 01 January 2004

STP12572S: Issues Related to the Mechanical Property Characterization of Sealants - 01 January 2004

STP12573S: Nondestructive Field Testing of Installed Weatherproofing Sealant Joints - 01 January 2004

STP12575S: Harmonization and Optimization of Weathering Test Methods for Building and Construction Sealants and Adhesives - 01 January 2004

STP12576S: Material Properties for Use in FEA Modeling: Sealant Behavior with Ambient Laboratory Climate Aging - 01 January 2004

STP12553S: Structural Glazing Failure — Five Case Studies - 01 January 2004

STP12577S: Concepts for Development of a Service Life Prediction Methodology for Sealed Building and Construction Joints—Review and Roadmap for Future Research - 01 January 2004

STP12550S: Secondary Drainage System for Architectural Panel Systems - 01 January 2004

STP12555S: Historical Development and Future Prospects of Structural Silicone Sealants in China - 01 January 2004

STP12556S: Influence of Polyester Powder Coating Chemistry on Adhesion Durability of Silicone Sealants - 01 January 2004

STP12557S: Water Absorption in Cold Liquid-Applied Waterproofing - 01 January 2004

STP12558S: Effects on Silicone Sealant Adhesion Buildup on Float Glass Substrates - 01 January 2004

STP12587S: Installation of Adhesively Bonded Composites to Repair Carbon Steel Structure - 01 January 2004

STP1455-EB: Joining and Repair of Composite Structures - 01 January 2004

STP12588S: Bolted Joint Analyses for Composite Structures — Current Empirical Methods and Future Scientific Prospects - 01 January 2004

STP12589S: IBOLT: A Composite Bolted Joint Static Strength Prediction Tool - 01 January 2004

STP12590S: Damage and Failure Mechanisms in Composite Bolted Joints - 01 January 2004

STP12591S: Development of Compression Design Allowables for Composite Bolted Joints Using ASTM Standard D 6742 - 01 January 2004

STP12581S: Adhesive Nonlinearity and the Prediction of Failure in Bonded Composite Lap Joints - 01 January 2004

STP12580S: Application of a Sublaminate Method to the Analysis of Bonded Joints - 01 January 2004

STP12582S: Box Beam Lap Shear Torsion Testing for Evaluating Structural Performance of Adhesive Bonded Joints - 01 January 2004

STP12583S: Performance of a Composite Double Strap Joint with Attachments - 01 January 2004

STP12584S: Evaluation of a Carbon Thermoplastic to Titanium Bonded Joint - 01 January 2004

STP12585S: Mechanism of Adhesive in Secondary Bonding of Fiberglass Composites with Peel Ply Surface Preparation - 01 January 2004

STP12586S: Static and Dynamic Strength of Scarf-Repaired Thick-Section Composite Plates - 01 January 2004

STP1445-EB: Crosslinked and Thermally Treated Ultra-High Molecular Weight Polyethylene for Joint Replacements - 01 January 2004

STP11928S: Wear and Structural Fatigue Simulation of Crosslinked Ultra-High Molecular Weight Polyethylene For Hip and Knee Bearing Applications - 01 January 2004

STP11266S: Effects of Pu Decay on a Sodalite Based Ceramic Waste Form - 01 January 2004

STP1448-EB: Technology of Floor Maintenance and Current Trends - 01 January 2004

STP1453-EB: Durability of Building and Construction Sealants and Adhesives - 01 January 2004

STP12554S: Quality Control Guidelines for Factory Applied Structural Silicone Glazing - 01 January 2004

STP11105S: An Innovative Technique for Measuring Fracture Toughness of Metallic and Ceramic Materials - 01 January 2003

STP11117S: Understanding the Performance Characteristics of Air Inclusion Nozzle Technology - 01 January 2003

STP11118S: Pulse Width Modulated Sprays for Flow Rate and Droplet Size Control: Spray Dynamics and Field Performance - 01 January 2003

STP11119S: Application of Abscission Sprays for Mechanical Harvesting of Hamlin Orange - 01 January 2003

STP11120S: Using Pollinators to Deliver Biological Control Agents Against Crop Pests - 01 January 2003

STP11121S: Microencapsulated Medicines for Beneficial Insects - 01 January 2003

STP11109S: Novel Polymeric Dispersants for Aqueous Suspension Concentrate Formulations - 01 January 2003

STP11122S: Sulfosulfuron and Glyphosate Efficacy with Various Humectants - 01 January 2003

STP11123S: Adjuvants Influence the Activity of Diuron and Norflurazon - 01 January 2003

STP11110S: Clays as Biological Carriers - 01 January 2003

STP11111S: A Systematic Study of Wetting as Influenced by Hydrocarbon Fluid Type - 01 January 2003

STP11108S: From Clinton to Bush: Continuity and Change in Federal Pesticide Policy - 01 January 2003

STP11112S: Physical Properties of Alkylene Carbonate Solvents and Their Use in Agricultural Formulations - 01 January 2003

STP11113S: Application Study of Alkylether Citrate Surfactants in 2,4-D IOE Herbicide Concentrated Emulsion Formulations - 01 January 2003

STP11114S: Improved Efficacy of Lignosulfonate Dispersants Through a Novel Combination - 01 January 2003

STP11115S: Formulation of Phenoxy Ester Herbicide EW Concentrates with Alkylether Citrate Ester Surfactants - 01 January 2003

STP11116S: Pesticide Delivery: Multiple Role of Adjuvants in Foliar Application of Systemic Compounds - 01 January 2003

STP1436-EB: Composite Materials: Testing and Design, Fourteenth Volume - 01 January 2003

STP38408S: Assessment of Composite Containment Loadings by an Adapted Failure Effect Analysis - 01 January 2003

STP38409S: Materials and Durability Characterization of Composite Wrap Systems Using NOL Ring Tests - 01 January 2003

STP38410S: Interfacial Contact Behavior of CFRP-Metal Couples - 01 January 2003

STP38412S: Autofrettage to Offset Coefficient of Thermal Expansion Mismatch in Metal-Lined Composite Pipes - 01 January 2003

STP38413S: Experimental and Computational Characterization of the High Strain Rate Tensile Response of Polymer Matrix Composites - 01 January 2003

STP38415S: Non-Scalar Approach to Simulate the Mechanical Degradation Process in Fibre-Reinforced-Polymers (FRPs) - 01 January 2003

STP38416S: Tensile, Compressive, and Shear Response of a Particulate Reinforced Aluminum Composite - 01 January 2003

STP38417S: Fatigue Life of SCS-6/Timetal® 834 at Room Temperature and 600°C: Experiments and Modeling - 01 January 2003

STP38418S: A Range of Practical Failure Criteria for Laminated Composites - 01 January 2003

STP38419S: A Theoretical Study Of The Tensile Test For Highly Anisotropic Composite Materials - 01 January 2003

STP38420S: Assessment of Damage in a Unidirectional Off-axis Carbon-Epoxy Composite Under Cyclic Loading - 01 January 2003

STP38421S: A Criterion to Control Nonlinear Error in the Mixed-Mode Bending Test - 01 January 2003

STP38422S: Comparison of Delamination Characterization for IM7/8552 Composite Woven and Tape Laminates - 01 January 2003

STP11199S: Ready-to-use Aqueous Formulations and Concentrates for Strobilurin Class of Fungicides - 01 January 2003

STP11200S: Enhancing the Biological Activity of Nicosulfuron with Silicone Adjuvants and pH Adjusters - 01 January 2003

STP11201S: Dynamic Investigations of the Formation of Phenoxy Ester Herbicide Concentrated Emulsions - 01 January 2003

STP11202S: Comparisons of 2-Ethylhexyl Ester Formulations of 2,4-D: Chemistry and Bioefficacy - 01 January 2003

STP11203S: Glyphosate: Twenty-Eight Years and Still Growing — The Discovery, Development, and Impact of this Herbicide on the Agrichemical Industry - 01 January 2003

STP11204S: Biologically Active In-Tank Formulation of Acid Herbicides - 01 January 2003

STP11191S: Effects of Urea and Ammonium Nitrate on Penetration of NAA Through Enzymatically Isolated Tomato Fruit Cuticular Membranes - 01 January 2003

STP11205S: A Wind Tunnel Investigation of Airborne Liquid Particle Behavior: Adjuvant Effects on Deposition - 01 January 2003

STP11206S: Cotton Insecticide and Defoliant Efficacy as Influenced by Spray Application Parameters - 01 January 2003

STP11207S: Characterizing Granular Material in Aerial Application - 01 January 2003

STP11208S: Efficacy of Apogee® (prohexadione calcium) on McIntosh Apple Comparing Two Pesticide Application Technologies, a Disc-Core Type Hollow Cone Nozzle and Air Induction Nozzle - 01 January 2003

STP11209S: Droplet Size Affects Durability of Spray Deposits - 01 January 2003

STP11210S: Proposed Definitions, Specifications, and Data Requirements for Identical or Substantially Similar Pesticide Products - 01 January 2003

STP11211S: EPA Regulation of Inerts Under the Bush Administration: A New Departure - 01 January 2003

STP11192S: An Examination of Interactions Between Various Dispersants and Other Surfactants in Wettable Powder Formulations - 01 January 2003

STP11190S: New and Improved Techniques for Microemulsifying Modified Seed Oils and Pesticides - 01 January 2003

STP11193S: Agricultural Applications of Structured Surfactant Formulations - 01 January 2003

STP11194S: Application of Latex Emulsion Polymers in Seed Coating Technology - 01 January 2003

STP11195S: Influence of Trisiloxane Alkoxylate Polarity on Spreading of Methylated Oil Based Adjuvants - 01 January 2003

STP11196S: Determination of Organosilicone Surfactant Phytotoxicity for Selected Vegetable Species - 01 January 2003

STP11197S: Effect of the Lignin Component Size and Proportioning on the Performance of Heterogeneous Sulfonated Lignin Dispersants - 01 January 2003

STP11198S: 2,4-D Salts and Adjuvants-Review and Perspectives - 01 January 2003

STP11576S: Issues Related to the Flammability Assessment of Polymers for Hazard Analyses of Oxygen Systems - 01 January 2003

STP11577S: Toxic Combustion Products Testing of Polymers Used in Oxygen Systems A Review of Testing at WSTF - 01 January 2003

STP11599S: Pipe Cleaning Using HFE Solvents and Assessment of Particle Contamination Found During Pipe Connection - 01 January 2003

STP11601S: Effect of Molding and Machining on Neoflon CTFE M400H Polychlorotrifluoroethylene Rod Stock and Valve Seat Properties - 01 January 2003

STP11574S: Review of Pneumatic Impact Sensitivity Data Obtained on Selected Polymers for Aerospace Applications - 01 January 2003

STP1430-EB: Pesticide Formulations and Delivery Systems: Meeting the Challenges of the Current Crop Protection Industry - 01 January 2003

STP38407S: Experimental Failure Effect Analysis of Composite High-Speed Flywheel Rotors - 01 January 2003

STP38411S: Long-Term Strain-Corrosion Behavior in RPM Sewer Pipes - 01 January 2003

STP38414S: Computational Simulation of Composite Fracture Toughness Parameters - 01 January 2003

STP38402S: Ultrasonic Spectroscopy of Developmental Composite Rotors - 01 January 2003

STP38401S: Composite Flywheel Rotor Technology—A Review - 01 January 2003

STP38403S: Hydroburst Test Methodology for Evaluation of Composite Structures - 01 January 2003

STP38404S: Time-Temperature Dependent Response of Filament Wound Composites for Flywheel Rotors - 01 January 2003

STP38405S: Viscoelastic Model of Anisotropic Flywheels - 01 January 2003

STP38406S: A Study of Time-dependent and Anisotropic Effects on the Deformation Response of Two Flywheel Designs - 01 January 2003

STP11178S: Synergistic Effects of a Combined Exposure to Herbicides and an Insecticide in Hyla versicolor - 01 January 2003

STP11177S: Determination of Malathion Aerial Drift and Associated Effects to the Endangered Wyoming Toad (Bufo baxteri) Using Surrogate Woodhouse's Toads (Bufo woodhousii) at Mortenson and Hutton Lake National Wildlife Refuges and Potential Reintroduction Sites - 01 January 2003

STP1449-EB: Pesticide Formulations and Application Systems: 23rd Volume - 01 January 2003

STP10594S: Development of ASTM C 1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics - 01 January 2002

STP10595S: Standard Reference Material 2100: Fracture Toughness of Ceramics - 01 January 2002

STP10474S: The Fracture Toughness Round Robins in VAMAS: What We Have Learned - 01 January 2002

STP1409-EB: Fracture Resistance Testing of Monolithic and Composite Brittle Materials - 01 January 2002

STP10475S: R-Curve Measurement of Silicon Nitride Based Ceramics at Elevated Temperatures with Single Edge Notched Beam Specimens - 01 January 2002

STP10476S: Crack Deflection Toughening Mechanism in Brittle Materials - 01 January 2002

STP10477S: Application of Quantitative Fractography to the Characterization of R-Curve Behavior - 01 January 2002

STP10478S: Fracture Testing of a Layered Functionally Graded Material - 01 January 2002

STP10469S: Failure from Large Grains in Polycrystalline Ceramics: Transitions in Fracture Toughness - 01 January 2002

STP10479S: Environmental and Thermal Effects on the Toughness of TiCN-Based Materials - 01 January 2002

STP10480S: Fracture Toughness Studies on Ceramics and Ceramic Particulate Composites at Different Temperatures - 01 January 2002

STP10481S: The Effect of Stress Rate on Slow Crack Growth Parameter Estimates - 01 January 2002

STP10470S: Stresses in Ceramic Plates Subjected to Loading Between Concentric Rings - 01 January 2002

STP10468S: Fracture Mechanics of Brittle Ceramics - 30 Years of Progress - 01 January 2002

STP10471S: Development, Verification, and Implementation of a National Full Consensus Fracture Toughness Test Method Standard for Advanced Ceramics - 01 January 2002

STP10472S: Does Anyone Know The Real Fracture Toughness? SRM 2100: The World's First Ceramic Fracture Toughness Reference Material - 01 January 2002

STP10473S: Fracture Toughness of Ceramics using the SEVNB Method: From a Preliminary Study to a Standard Test Method - 01 January 2002

STP10603S: Experimental Technique for Monitoring Fatigue Crack Growth Mechanisms During Thermomechanical Cycling - 01 January 2002

STP10634S: A Comparison of Quasi-Static Indentation Testing to Low Velocity Impact Testing - 01 January 2002

STP1416-EB: Composite Materials: Testing, Design, and Acceptance Criteria - 01 January 2002

STP10636S: Damage Resistance and Damage Tolerance of Pultruded Composite Sheet Materials - 01 January 2002

STP10637S: Mechanical Degradation of Continuous Glass Fibre-Reinforced Thermoplastics under Static and Cyclic Loading: A Prepreg Laminate — Technical Textile Comparison - 01 January 2002

STP10638S: Philosophies for Assessing Durability of Commercial and Infrastructure Composite Systems - 01 January 2002

STP10629S: Multi-Axial Composite Tube Test Method - 01 January 2002

STP10639S: Computational Prediction of Yarn Structure of 3D-Braided Composites - 01 January 2002

STP10640S: Principles for Recovering Micro-Stress in Multi-Level Analysis - 01 January 2002

STP10641S: Measurement of CTE at Reduced Temperature for Stressed Specimens - 01 January 2002

STP10642S: The Effect of Moisture, Matrix and Ply Orientation on Delamination Resistance, Failure Criteria and Fracture Morphology in CFRP - 01 January 2002

STP10643S: Interlaminar Crack Propagation in CFRP: Effects of Temperature and Loading Conditions on Fracture Morphology and Toughness - 01 January 2002

STP10644S: Buckling and Fracture Behavior of Tapered Composite Panels Containing Ply Drops - 01 January 2002

STP10630S: Finite Element Analysis of Unidirectional Composite Compression Test Specimens: A Parametric Study - 01 January 2002

STP10628S: Tabbed Versus Untabbed Fiber-Reinforced Composite Compression Specimens - 01 January 2002

STP10631S: Structural Integrity Assessment of Composite Pressure Test Box through Full Scale Test - 01 January 2002

STP10632S: Qualification Using a Nested Experimental Design - 01 January 2002

STP10633S: The Development and Use of a Common Database for Composite Materials - 01 January 2002

STP10828S: Specimen Size Effects on Tensile Properties of 2D/3D SiC/SiC Composites - 01 January 2002

STP38303S: Recent Experiences with Ester Based Fluids in Qualification Tests - 01 January 2001

STP1383-EB: Composite Structures: Theory and Practice - 01 January 2001

STP14506S: A Method for Calculating Strain Energy Release Rates in Preliminary Design of Composite Skin/Stringer Debonding Under Multiaxial Loading - 01 January 2001

STP14502S: A Review of Some Key Developments in the Analysis of the Effects of Impact Upon Composite Structures - 01 January 2001

STP14507S: Fail-safe Approach for the V-22 Composite Proprotor Yoke - 01 January 2001

STP14508S: RAH-66 Comanche Building Block Structural Qualification Program - 01 January 2001

STP14509S: The Effects of Marcel Defects on Composite Structural Properties - 01 January 2001

STP14510S: Influence of Ply Waviness on Fatigue Life of Tapered Composite Flexbeam Laminates - 01 January 2001

STP14511S: Structural Qualification of Composite Propeller Blades Fabricated by the Resin Transfer Molding Process - 01 January 2001

STP14512S: Three-Dimensional Stress Analysis and Failure Prediction in Filled Hole Laminates - 01 January 2001

STP14513S: Damage-Tolerance-Based Design of Bolted Composite Joints - 01 January 2001

STP14514S: Open Hole Compression Strength and Failure Characterization in Carbon/Epoxy Tape Laminates - 01 January 2001

STP14515S: The Influence of Fastener Clearance Upon the Failure of Compression-Loaded Composite Bolted Joints - 01 January 2001

STP14503S: Certification Cost Reduction Using Compression-After-Impact Testing - 01 January 2001

STP14516S: Characterizing Delamination Growth in a 0°/45° Interface - 01 January 2001

STP14517S: New Experiments Suggest that All Shear and Some Tensile Failure Processes are Inappropriate Subjects for ASTM Standards - 01 January 2001

STP14518S: Effect of Friction on the Perceived Mode II Delamination Toughness from Three- and Four-Point Bend End-Notched Flexure Tests - 01 January 2001

STP14519S: Finite Element Analysis of Delamination Growth in a Multidirectional Composite ENF Specimen - 01 January 2001

STP14520S: Comparison of Designs of CFRP-Sandwich T-Joints for Surface-Effect Ships Based on Acoustic Emission Analysis from Load Tests - 01 January 2001

STP14521S: Development of a Test Method for Closed-Cross-Section Composite Laminates Subjected to Compression Loading - 01 January 2001

STP14522S: Tension Pull-off and Shear Test Methods to Characterize 3-D Textile Reinforced Bonded Composite Tee-Joints - 01 January 2001

STP14501S: USAF Experience in the Qualification of Composite Structures - 01 January 2001

STP14523S: What the Textbooks Won't Teach You About Interactive Composite Failure Criteria - 01 January 2001

STP14524S: Curved Laminated Beams Subjected to Shear Loads, Moments, and Temperature Changes - 01 January 2001

STP14525S: Damage, Stiffness Loss, and Failure in Composite Structures - 01 January 2001

STP14526S: Compressive Strength of Production Parts Without Compression Testing - 01 January 2001

STP14527S: Environmental Effects on Bonded Graphite/Bismaleimide Structural Joints - 01 January 2001

STP14504S: Mechanisms and Modeling of Delamination Growth and Failure of Carbon-Fiber Reinforced Skin-Stringer Panels - 01 January 2001

STP14528S: Accelerated Tests of Environmental Degradation in Composite Materials - 01 January 2001

STP14529S: The Effects of Initial Imperfections on the Buckling of Composite Cylindrical Shells - 01 January 2001

STP14505S: Parametric Study of Three-Stringer Panel Compression-After-lmpact Strength - 01 January 2001

STP10439S: Physical Properties and Use of Branched Alcohol Ethoxylates in Agricultural Formulations - 01 January 2001

STP10440S: Optimum Surfactant HLB Value for Nicosulfuron Is Salt Dependent - 01 January 2001

STP10441S: The Physical Chemistry of WDGs: Porosity and Surfactant Dissolution as a Function of Dispersant Molecular Weight - 01 January 2001

STP10442S: Novel High Performance Water-Soluble Antifoam Based on Perfluoroalkylphosphinic and Perfluoroalkylphosphonic Acids in Crop Protection - 01 January 2001

STP10443S: Matricap® Systems: Factors Affecting Pesticide Delivery and Targeting - 01 January 2001

STP10431S: Chemical Descriptors - An Approach to Codify the EPA Inerts Exempt List (40 CFR 180.1001) - 01 January 2001

STP10444S: A Novel Nozzle-Adjuvant System for Low Volume Pesticide Application for Agriculture and Forestry - 01 January 2001

STP10432S: The Effect of Fluid Properties on the Spray Quality from a Flat Fan Nozzle - 01 January 2001

STP10433S: Analyses of Equipment, Meteorology and Other Factors Affecting Drift from Applications of Sprays by Ground Rig Sprayers - 01 January 2001

STP10434S: Assay Variance in a Granular Formulation Can Predict Mixture Homogeneity - 01 January 2001

STP10435S: The Development of a Spread Test Method for Agricultural Spray Adjuvants - 01 January 2001

STP10436S: Classification of Adjuvants and Adjuvant Blends by Effects on Cuticular Penetration - 01 January 2001

STP10437S: Influence of Three Experimental Adjuvants on Glyphosate Weed Efficacy - 01 January 2001

STP10703S: Modulated-Temperature Thermomechanical Measurements - 01 January 2001

STP1402-EB: Materials Characterization by Dynamic and Modulated Thermal Analytical Techniques - 01 January 2001

STP10706S: Characterization of Electrorheological Processes By Dielectric Thermal Analysis - 01 January 2001

STP10707S: Characterization of Organic Surfactants and Dispersants by Frequency-Dependent Dielectric Thermal Analysis and Electrochemistry - 01 January 2001

STP10708S: Development of Bismaleimide/Cyanate Ester Copolymers - 01 January 2001

STP10697S: Measurement of Crystallinity in Polymers Using Modulated Temperature Differential Scanning Calorimetry - 01 January 2001

STP10709S: Application of Theory to Prediction and Analysis of Dynamic Mechanical Properties of Polymer Composites - 01 January 2001

STP10710S: Glass Transition Temperature of Selected Polymers by TMDSC, DMTA and DETA Analyses - 01 January 2001

STP10698S: Crystallization of Polymers and the Rigid Amorphous Fraction Studied by the Temperature-Modulated Techniques TMDSC and TMDMA - 01 January 2001

STP10696S: Temperature-Modulated Calorimetry of Polymers with Single and multiple Frequencies to Determine Heat Capacities as Well as Reversible and Irreversible Transition Parameters - 01 January 2001

STP10699S: Evaluation of the Curing Process in a Fiber-Reinforced Epoxy Composite by Temperature-Modulated and Step Scan DSC and DMA - 01 January 2001

STP10700S: Effects of TMDSC Variables on the Observed Glass Transitions of Elastomers- a Statistical Analysis - 01 January 2001

STP10701S: Glass Transformation Studies of Vitreous As2Se3 by Temperature-Modulated DSC - 01 January 2001

STP10702S: Comparison Between Modulated Differential Scanning Calorimetry (MDSC) and Dynamic Differential Scanning Calorimetry (DDSC) - 01 January 2001

STP10571S: The Influence of Temperature, Fluence, Dose Rate, and Helium Production on Defect Accumulation and Swelling in Silicon Carbide - 01 January 2001

STP10572S: Microstructural Stability of SiC/SiC Composites under Dual-Beam Ion Irradiation - 01 January 2001

STP10576S: Effect of Mass and Energy on Preferential Amorphization in Polycrystalline Silicon Film during Ion Irradiation - 01 January 2001

STP10978S: Fatigue and Fracture in Membranes for MEMS Power Generation - 01 January 2001

STP10722S: Design and Performance of Crop Oil Concentrate Emulsifiers - 01 January 2001

STP10714S: Sulfosulfuron Efficacy Is Affected by Surfactants, pH of Spray Mixture, and Salts - 01 January 2001

STP10723S: Novel Polymeric Dispersants for Water Dispersible Granules - 01 January 2001

STP10724S: Alkoxylated Glyceride Emulsifiers in Agricultural Applications - 01 January 2001

STP10725S: Environmental Management Strategies for Biodegradable Nonylphenol Ethoxylates in Agricultural Products - 01 January 2001

STP10726S: Pesticide Spray Droplet Adhesion Modeling - 01 January 2001

STP10727S: Adjuvant Effects on Spray Characteristics and Drift Potential - 01 January 2001

STP10728S: Spray Deposition Effect on Abscission Efficacy of CMN-Pyrazole in Harvesting Oranges - 01 January 2001

STP10729S: The Measurement of Droplet Size Distributions from Rotary Atomizers - 01 January 2001

STP10730S: Monobranched Alcohol Alkoxylates: A New Generation of Surfactants for Use in Crop Protection - 01 January 2001

STP10731S: Foam Control Strategies for Formulating with Alkypolyglycoside Surfactants - 01 January 2001

STP10732S: Low Dose Urea-Surfactant Adjuvant for Sulfonylurea Herbicides - 01 January 2001

STP10715S: The Influence of Inorganic Cations on Glyphosate Activity-Review and Perspectives - 01 January 2001

STP10733S: A New Adjuvant Blend for Glyphosate Herbicides - 01 January 2001

STP10716S: Pesticide Solubility and Other Tools to Use to Optimize an Emulsifiable Concentrate Formulation - 01 January 2001

STP10713S: Cellular Toxicity of Different Classes of Adjuvants - 01 January 2001

STP10717S: Dynamic Surface Tension of Selected Nonionic Agricultural Surfactants at Surface Ages Relevant to Component Processes in Spray Application - 01 January 2001

STP10718S: Recent Trends in Pesticide Formulation in Japan - 01 January 2001

STP10719S: Strategies for Agricultural Formulations: A Statistical Design Approach - 01 January 2001

STP10720S: Formulating Options for Aerosol Insecticides - 01 January 2001

STP10721S: The Physical Chemistry of Water Dispersible Granules, Part II: The Influence of Dispersant Molecular Weight and Paste Rheology on the Physical Properties of Extruded WDGs - 01 January 2001

STP38291S: Ceramic Parts for Hydrostatic Pumps and Motors - 01 January 2001

STP1400-EB: Pesticide Formulations and Application Systems: Twentieth Volume - 01 January 2001

STP10438S: Correlation Between Formulation Properties and Safety Measures for a Dry Product Mixing and Milling Facility - 01 January 2001

STP10430S: Implementation of the Food Quality Protection Act (FQPA): An Analysis - 01 January 2001

STP10573S: Molecular Dynamics Simulation of Radiation Damage Production in Cubic Silicon Carbide - 01 January 2001

STP1414-EB: Pesticide Formulations and Application Systems: A New Century for Agricultural Formulations, Twenty First Volume - 01 January 2001

STP15832S: An Overstress Model for Solid Polymer Deformation Behavior Applied to Nylon 66 - 01 January 2000

STP1357-EB: Time Dependent and Nonlinear Effects in Polymers and Composites - 01 January 2000

STP15833S: Aging During Elevated Temperature Stress Relaxation of IM7/K3B Composite - 01 January 2000

STP15834S: Tensile and Compressive Creep of a Thermoplastic Polymer and the Effects of Physical Aging on the Composite Time-Dependent Behavior - 01 January 2000

STP15835S: Nonlinear Multiaxial Behavior and Failure of Fiber-Reinforced Composites - 01 January 2000

STP15827S: Time Dependent Volume and Enthalpy Responses in Polymers - 01 January 2000

STP15836S: Nonlinear and Dynamic Compressive Behavior of Composites with Fiber Waviness - 01 January 2000

STP15837S: Nonlinear Viscoelastic Behavior of Rubber-Toughened Carbon and Glass/Epoxy Composites - 01 January 2000

STP15838S: A Viscoplasticity Model for Characterizing Loading and Unloading Behavior of Polymeric Composites - 01 January 2000

STP15839S: Durability and Damage Tolerance of a Polyimide Chopped Fiber Composite Subjected to Thermomechanical Fatigue Missions and Creep Loadings - 01 January 2000

STP15840S: Life Prediction of PPS Composites Subjected to Cyclic Loading at Elevated Temperatures - 01 January 2000

STP15841S: Accelerated Strength Testing of Thermoplastic Composites - 01 January 2000

STP15842S: Hygrothermal Modeling of Polymers and Polymer Matrix Composites - 01 January 2000

STP15843S: Hygrothermal Effects on Failure Mechanisms of Composite/Steel Bonded Joints - 01 January 2000

STP15826S: Mechanical Properties of Degraded PMR-15 Resin - 01 January 2000

STP15828S: Creep Behavior in Amorphous and Semicrystalline PEN - 01 January 2000

STP15829S: A Constitutive Model for Long-Term Behavior of Polymers - 01 January 2000

STP15830S: Implementation of Constitutive Model in FEA for Nonlinear Behavior of Plastics - 01 January 2000

STP15831S: The Effect of Nonlinear Viscoelasticity on Interfacial Shear Strength Measurements - 01 January 2000

STP12454S: Effect of Ionizing and Displacive Components of Irradiation on the Structural Transformations in Pyrolitic Boron Nitride Ceramics - 01 January 2000

STP14741S: Analysis of Fretting Damage in Polymers by Means of Fretting Maps - 01 January 2000

STP14345S: Notched Impact Testing of Thermoplastics: A New Perspective - 01 January 2000

STP1369-EB: Limitations of Test Methods for Plastics - 01 January 2000

STP14338S: On the Variation of Compliance Measurements in Polymeric Solids - 01 January 2000

STP14346S: Instrumented Pendulum Impact Testing of Plastics - 01 January 2000

STP14347S: Development of a Standard for Determining KIC and GIC for Plastics at High Loading Rates: the ESIS Protocol for 1 m/s Testing - 01 January 2000

STP14348S: PENT-Universal Test for Slow Crack Growth in Plastics - 01 January 2000

STP14349S: Temperature Measurements in TGA - 01 January 2000

STP14350S: Pitfalls in Measurement of non-Newtonian Materials—“It's a Line, Not a Point!” - 01 January 2000

STP14351S: Factors Affecting the Accuracy of TMA Measurements - 01 January 2000

STP14352S: Acetone Immersion Testing Per ASTM Test Method D2152 - 01 January 2000

STP14353S: Reinforced Epoxy Resin Cure Assessment in Composite Materials: Measure and Effects - 01 January 2000

STP14339S: Estimation of Lifetime Under Non-Isothermal Conditions - 01 January 2000

STP14340S: A Comparison of Tension Test Data Using ASTM D 638 and ISO 527 - 01 January 2000

STP14337S: What Does a Property Data Sheet Really Tell You? - 01 January 2000

STP14341S: The Usefulness of HDT and a Better Alternative to Describe the Temperature Dependence of Modulus - 01 January 2000

STP14342S: Interpretations of Tensile Properties of Polyamide 6 and PET Based Thermoplastics Using ASTM and ISO Procedures - 01 January 2000

STP14343S: Tension Testing of Thin Bulk Adhesive Specimens - 01 January 2000

STP14344S: A Study of Bond Strength Testing for Solvent Cement Joints in PVC Piping Systems - 01 January 2000

STP15261S: Thermal Strain Fatigue Modeling of a Matrix Alloy for a Metal Matrix Composite - 01 January 2000

STP13462S: Comparative Tracking Index of Flame-Retardant Nylon and PBT - 01 January 2000

STP14396S: Evaluation of ABS Plastic Impact Verification Specimens - 01 January 2000

STP14399S: Dynamic Force Calibration for Measuring Impact Fracture Toughness using the Charpy Testing Machine - 01 January 2000

STP12480S: Calculation of The Spectral Irradiance of Solar Radiation for the Lifetime Prediction of Polymer Materials - 01 January 2000

STP13495S: Biaxial Strength Testing of Isotropic and Anisotropic Monoliths - 01 January 2000

STP13497S: Analysis of Characterization Methods for Inelastic Composite Material Deformation Under Multiaxial Stresses - 01 January 2000

STP13498S: Deformation and Fracture of a Particulate MMC Under Nonradial Combined Loadings - 01 January 2000

STP14819S: Effect of Moisture on Fracture Toughness of Composite/Wood Bonded Interfaces - 01 January 2000

STP15008S: Stress-Rupture, Overstrerssing, and a New Methodology to Assess the High-Temperature Durability and Reliability of CFCCs - 01 January 2000

STP1392-EB: Mechanical, Thermal and Environmental Testing and Performance of Ceramic Composites and Components - 01 January 2000

STP15009S: Use of Unload/Reload Methodologies to Investigate the Thermal Degradation of an Alumina Fiber-Reinforced Ceramic Matrix Composite - 01 January 2000

STP15010S: Fiber Test Development for Ceramic Composite Thermomechanical Properties - 01 January 2000

STP15011S: Effect of Fiber Waviness on the Tensile Response of 2D C(f)/SiC Ceramic Matrix Composites - 01 January 2000

STP15003S: Multiple-Laboratory Round-Robin Study of the Flexural, Shear, and Tensile Behavior of a Two-Dimensionally Woven Nicalon™/Sylramic™ Ceramic Matrix Composite - 01 January 2000

STP15012S: Surface Finish and Notch Effect Model for Strength Predictions of Continuous Fiber Ceramic Composites (CFCCs) - 01 January 2000

STP15013S: Notch-Sensitivity of a Woven Oxide/Oxide Ceramic Matrix Composite - 01 January 2000

STP15014S: The Effects of Microstructural Damage on the Thermal Diffusivity of Continuous Fiber-Reinforced Ceramic Matrix Composites - 01 January 2000

STP15015S: Oxidation Behavior of Non-Oxide Ceramics in a High-Pressure, High-Temperature Steam Environment - 01 January 2000

STP15016S: The Time-Dependent Deformation of Carbon Fiber-Reinforced Melt-Infiltrated Silicon Carbide Ceramic Matrix Composites: Stress-Rupture and Stress-Relaxation Behavior in Air at 1000°C - 01 January 2000

STP15017S: The Relationship between Interphase Oxidation and Time-Dependent Failure in SiCf/ SiCm Composites - 01 January 2000

STP15018S: Characterization of Damage Accumulation in a Carbon Fiber-Reinforced Silicon Carbide Ceramic Matrix Composite (C/SiC) Subjected to Mechanical Loadings at Intermediate Temperature - 01 January 2000

STP15019S: Effect of Loading Mode on High-Temperature Tensile Deformation of a SiC/SiC Composite - 01 January 2000

STP15020S: Effects of Temperature and Environment on the Mechanical Properties of Tyranno-Hex™ Composites - 01 January 2000

STP15021S: Degradation of Continuous Fiber Ceramic Matrix Composites under Constant Load Conditions - 01 January 2000

STP15022S: Damage Accumulation in 2-D Woven SiC/SiC Ceramic Matrix Composites - 01 January 2000

STP15004S: Test Procedures for Determining the Delamination Toughness of Ceramic Matrix Composites as a Function of Mode Ratio, Temperature, and Layup - 01 January 2000

STP15002S: Relationships of Test Methods and Standards Development to Emerging and Retrofit CFCC Markets - 01 January 2000

STP15005S: Detailed Study of the Tensile Behavior of a Two-Dimensionally Woven Nicalon™/Sylramic™ Ceramic Matrix Composite - 01 January 2000

STP15006S: Testing Methodology for Measuring Transthickness Tensile Strength for Ceramic Matrix Composites - 01 January 2000

STP15007S: Flexural and Tensile Properties of a Two-Dimensional Nicalon™ -Reinforced Sylramic™ S-200 Ceramic Matrix Composite - 01 January 2000

STP12490S: Ignition Resistance of Polymeric Materials to Particle Impact in High-Pressure Oxygen - 01 January 2000

STP12497S: Potential Ignition Mechanism of Buna-N O-Rings in Liquid-Oxygen - 01 January 2000

STP12485S: Comparison of the Dimensional Stability of Kel-F 81 and Neoflon CTFE M400H Polychlorotrifluoroethylenes Used in Valve Seat Applications - 01 January 2000

STP12498S: A Fluid Flow Analysis of the Gaseous Impact Test - 01 January 2000

STP12499S: The Mechanisms of Smolder of Cellulosic Materials - 01 January 2000

STP12500S: Adiabatic Compression of Oxygen: Real Fluid Temperatures - 01 January 2000

STP12509S: Determination of Hydrocarbon Adsorption on Solid CO2 and N2O in LOX at Ambient Pressure - 01 January 2000

STP12511S: Determination of Oxidizing Ability of Gases and Gas Mixtures - 01 January 2000

STP12488S: Polymer-Oxygen Compatibility Testing: Effect of Oxygen Aging on Ignition and Combustion Properties - 01 January 2000

STP12489S: Ignitability in Air, Gaseous Oxygen, and Oxygen-Enriched Environments of Polymers Used in Breathing-Air Devices, Final Report - 01 January 2000

STP15304S: Modulation of Pore Topography of Tissue Engineering Constructs - 01 January 2000

STP15305S: In Vitro Compression Testing of Fiber-Reinforced, Bioabsorbable, Porous Implants - 01 January 2000

STP15298S: Bacterial Polyesters for Biomedical Applications: In vitro and in vivo Assessments of Sterilization, Degradation Rate and Biocompatibility of Poly (β-hydroxyoctanoate) (PHO) - 01 January 2000

STP15306S: Clinical Evaluation of a Bioresorbable Membrane for Hard Tissue Regeneration - 01 January 2000

STP15307S: Design and Fabrication of a 3D Scaffold for Tissue Engineering Bone - 01 January 2000

STP15296S: Mechanical Evaluation of 70:30 Poly (L/DL-Lactide) Bone Screws After In Vitro Degradation - 01 January 2000

STP15299S: Novel Biodegradable Polyurethanes for Medical Applications - 01 January 2000

STP15300S: Effects of Thermal History and Physical Aging on Thermal Properties of Poly-L-Lactide - 01 January 2000

STP15301S: Resorption Profile and Biological Response of Calcium Phosphate filled PLLA and PHB7V - 01 January 2000

STP15302S: The Clinical Evaluation of a Bioresorbable Minipin - 01 January 2000

STP15297S: Evaluation of Adhesive and Absorption Properties for Absorbable Tissue Adhesives - 01 January 2000

STP15303S: The Use of the Vibrating Particle Technique to Fabricate Highly Porous and Permeable Biodegradable Scaffolds - 01 January 2000

STP10225S: Environmentally Assisted Cracking in the Chemical Process Industry. Stress Corrosion Cracking of Iron, Nickel, and Cobalt Based Alloys in Chloride and Wet HF Services - 01 January 2000

STP14438S: Revising the Definition of Satisfactory Performance for Chemical Protection for Agricultural Workers - 01 January 2000

STP14451S: Pesticide Residue Distribution on Protective Clothing Fabrics as Determined by SEM Micrographs and Their Image Analyses - 01 January 2000

STP14456S: Protective Clothing and Application Control for Pesticide Applicators in India: A Field Study - 01 January 2000

STP14457S: Reduction of Terbufos and Tefluthrin Contamination in Glove Materials by Laundering - 01 January 2000

STP1396-EB: Synthetic Bioabsorbable Polymers for Implants - 01 January 2000

STP14982S: Mixed-Mode Fatigue Failure in Structural Adhesives - 01 January 1999

STP14197S: New Polymer Additives for Mortar Cement - 01 January 1999

STP14250S: Micromechanical Modeling of Mixed-Mode Crack Growth in Ceramic Composites - 01 January 1999

STP14286S: Attapulgite as a Suspension Control Agent and Rheology Modifier in Flowables - 01 January 1999

STP14287S: The Phytotoxicity of Solvents to Seeds - 01 January 1999

STP14288S: The Formation of a New ASTM E35.22 Task Group to Address Drift Management Adjuvants - 01 January 1999

STP14279S: Spray Coverage of Potato Plants Using Various Types of Applicators - 01 January 1999

STP14280S: Exploring the Role of Formulation and Adjuvant Chemistry in Pesticide Deposit Formation - 01 January 1999

STP14278S: Spray Droplet Size and Concentration of Metsulfuron-methyl Affects Ethylene Production in Oranges - 01 January 1999

STP14281S: Granulation Without a Drying Step Using Dielectric Heating of Binding Polymers - 01 January 1999

STP14282S: Improvements in Water Dispersibility and Stability of Starch-Containing Agricultural Formulations Using Vinylpyrrolidone Copolymers - 01 January 1999

STP14283S: Modification of Release Rate of Encapsulated A.I. Through Fluid Selection - 01 January 1999

STP14284S: A Discussion of the Dependence of Cuticular Mobility on Molecular Volume - 01 January 1999

STP14285S: Interaction Studies with Grafted Butene Vinyl Pyrrolidone Copolymer and Ligninsulfonates - 01 January 1999

STP38242S: Predictive Tools for Coolant Development: An Accelerated Aging Procedure for Modeling Fleet Test Results - 01 January 1999

STP1335-EB: Engine Coolant Testing: Fourth Volume - 01 January 1999

STP38243S: Rapid Electrochemical Screening of Engine Coolants. Correlation of Electrochemical Potentiometric Measurements with ASTM D 1384 Glassware Corrosion Test - 01 January 1999

STP38244S: Long-Term Serviceability of Elastomers in Modern Engine Coolants - 01 January 1999

STP38245S: Engine Coolant Compatibility with the Nonmetals Found in Automotive Cooling Systems - 01 January 1999

STP38246S: Influence of Engine Coolant Composition on the Electrochemical Degradation Behavior of EPDM Radiator Hoses - 01 January 1999

STP38247S: Assessment of the Validity of Conductivity as an Estimate of Total Dissolved Solids in Heavy-Duty Coolants - 01 January 1999

STP38248S: Scale and Deposits in High-Heat-Rejection Engines - 01 January 1999

STP38249S: Overview of Used Antifreeze and Industrial Glycol Recycling by Vacuum Distillation - 01 January 1999

STP38237S: Composition of Incipient Passivating Layers on Heat-Rejecting Aluminum in Carboxylate- and Silicate-Inhibited Coolants: Correlation with ASTM D 4340 Weight Losses - 01 January 1999

STP38250S: Recycling Used Engine Coolant Using High-volume Stationary, Multiple Technology Equipment - 01 January 1999

STP38251S: Development of Mobile, On-Site Engine Coolant Recycling Utilizing Reverse-Osmosis Technology - 01 January 1999

STP38252S: Heavy-duty Fleet Test Evaluation Of Recycled Engine Coolant - 01 January 1999

STP38253S: Evaluation of Engine Coolant Recycling Processes: Part 2 - 01 January 1999

STP38254S: Methods and Equipment for Engine Coolant Testing - 01 January 1999

STP38255S: Silicate Stabilization Studies in Propylene Glycol - 01 January 1999

STP38256S: Antifreeze: From Glycol to a Bottle on the Shelf—Manufacturing and Quality Control Considerations - 01 January 1999

STP38257S: Extended Service of “Fully Formulated” Heavy-Duty Antifreeze in American Cars - 01 January 1999

STP38259S: Overview of Engine Coolant Testing in Europe with Particular Regard to Its Development in Germany - 01 January 1999

STP38238S: Fleet Test Evaluation of Fully Formulated Heavy-Duty Coolant Technology Maintained with a Delayed-Release Filter Compared with Coolant Inhibited with a Nitrited Organic Acid Technology: An Interim Report - 01 January 1999

STP38239S: Engine Coolant Technology, Performance, and Life for Light-Duty Applications - 01 January 1999

STP38240S: Copper-Triazole Interaction and Coolant Inhibitor Depletion - 01 January 1999

STP38236S: Testing of Organic Acids in Engine Coolants - 01 January 1999

STP38241S: Corrosion and Testing of Engine Coolants - 01 January 1999

STP15806S: Pesticide Effects on Prolactin Release from the Rostral Pars Distalis In Vitro and Their Effects on Growth In Vivo in the Tilapia (Oreochromis mossambicus) - 01 January 1999

STP1373-EB: Pesticide Formulations and Application Systems: Global Pest Control Formulations for the Next Millennium: Nineteenth Volume - 01 January 1999

STP11914S: Investigation of Free Radicals in Ultra-High Molecular Weight Polyethylene (UHMWPE) Materials Following Irradiation and Aging - 01 January 1998

STP11915S: Accelerated Aging and Associated Changes in Ultra-High Molecular Weight Polyethylene (UHMWPE) Microstructure as a Function of Resin Type and Consolidation Variables - 01 January 1998

STP11916S: Tribological Properties of Extruded, Pressed, and Modified Ultra-High Molecular Weight Polyethylene (UHMWPE)—A Ring-on-Disc Screening Test - 01 January 1998

STP11907S: Quantitative Analysis of Extraneous Matter in Fabricated Ultra-High Molecular Weight Polyethylene (UHMWPE) - 01 January 1998

STP11908S: Viscoelastic Recovery of Creep-Deformed Ultra-High Molecular Weight Polyethylene (UHMWPE) - 01 January 1998

STP11909S: Fourier-Transform Infrared (FTIR) Oxidation Analysis of Ultra-High Molecular Weight Polyethylene (UHMWPE) Implants: Possible Contamination from Synovial Fluid and Serum - 01 January 1998

STP11910S: Analysis of Morphological Alteration Accompanying Post-Irradiation Aging in Montell 1900 Ultra-High Molecular Weight Polyethylene (UHMWPE) - 01 January 1998

STP11911S: Orientation Softening as a Mechanism of Ultra-High Molecular Weight Polyethylene (UHMWPE) Wear in Artificial Hip and Knee Joints - 01 January 1998

STP11906S: Process-Induced Effects in Compression Molding of Ultra-High Molecular Weight Polyethylene (UHMWPE) - 01 January 1998

STP11912S: A New Method to Determine the Locus of Radiation Damage in Retrieved Ultra-High Molecular Weight Polyethylene (UHMWPE) Components - 01 January 1998

STP11913S: Effect of Gamma-Radiation Induced Oxidation and Crosslinking on the Wear Performance of Ultra-High Molecular Weight Polyethylene (UHMWPE) Acetabular Cups - 01 January 1998

STP13269S: Effect of Stress and Geometry on Fatigue Crack Growth Perpendicular to Fibers in Ti-6Al-4V Reinforced with Unidirectional SiC Fibers - 01 January 1998

STP1330-EB: Composite Materials: Fatigue and Fracture: 7th Volume - 01 January 1998

STP13270S: An Experimental Investigation of Transverse Tension Fatigue Characterization of IM6/3501-6 Composite Materials Using a Three-Point Bend Test - 01 January 1998

STP13271S: Life Prediction Tool for Ceramic Matrix Composites at Elevated Temperatures - 01 January 1998

STP13272S: The Effects of Stress and Temperature on the Open-Hole Tension Fatigue Behavior of a Graphite/Bismaleimide Composite - 01 January 1998

STP13273S: Influence of Temperature and Stress Ratio on the Low-Cycle Fatigue Behavior of Trimarc-1 /Ti-6Al-2Sn-4Zr-2Mo - 01 January 1998

STP13264S: Overview of Biaxial Test Results for Carbon Fiber Composites - 01 January 1998

STP13274S: Environmental Fatigue of Pultruded Glass-Fiber-Reinforced Composites - 01 January 1998

STP13275S: Comparison of Two Accelerated Hot-Wet Aging Conditions of a Glass-Reinforced Epoxy Resin - 01 January 1998

STP13276S: The Effects of Tensile Preloads on the Impact Response of Carbon/Epoxy Laminates - 01 January 1998

STP13277S: Differences in the Impact Response Mechanisms of Graphite/Epoxy Composite Cylinders - 01 January 1998

STP13278S: Testing and Simulation of Laminated Composites Subjected to Impact Loading - 01 January 1998

STP13279S: Residual Strength Prediction of Impact-Damaged Composite Structures by Optical and Acoustical Computer Sensing with Neural Network Techniques - 01 January 1998

STP13280S: Fatigue and Fracture of Art Made from Composite Materials - 01 January 1998

STP13265S: Application of a Stochastic Model for Fatigue-Induced Delamination Growth in Graphite/Epoxy Laminates - 01 January 1998

STP13263S: Composite Interlaminar Shear Fracture Toughness, GIIc: Shear Measurement or Sheer Myth? - 01 January 1998

STP13266S: An Approach to Include Interfacial Wear Effects in Modeling Fatigue Crack Growth of Titanium Matrix Composites - 01 January 1998

STP13267S: Compression Strength Reduction in Composites with in-Plane Fiber Waviness - 01 January 1998

STP13268S: Fatigue Debonding Characterization in Composite Skin/Stringer Configurations - 01 January 1998

STP12158S: Occurrence and Distribution of Semivolatile Organic Compounds in Stream Bed Sediments, United States, 1992–95 - 01 January 1998

STP12159S: Characterization of Ambient Levels of Metals and Polycyclic Aromatic Hydrocarbons for Surficial Soil in the Urban Piedmont Region of New Jersey - 01 January 1998

STP12160S: Interactive Effects of Pesticide Mixtures on the Neurobehavioral Responses and Ache Levels of Planaria - 01 January 1998

STP12157S: Identification of Cytochrome P4501A Inducers in Complex Mixtures of Polycyclic Aromatic Hydrocarbons - 01 January 1998

STP15671S: A Simple Device for Measuring Adhesive Failure in Sealant Joints - 01 January 1998

STP15672S: Hybrid Weatherseals — Design and Implementation of Bridge Sealant Joints in Two and Three Dimensions - 01 January 1998

STP15673S: Silicone Preformed Joint Seals (PJS) and Their Applications - 01 January 1998

STP15674S: Using Three Dimensional Silicone “Boots” to Solve Complex Remedial Design Problems in Curtain Walls - 01 January 1998

STP15675S: Custom Molded Silicone Flashing Shapes for Sealing Curtain Walls - 01 January 1998

STP15676S: Evaluation of Various Sealants with EIFS - 01 January 1998

STP15677S: Selection and Use of Seals and Sealants at Building Roofs - 01 January 1998

STP15678S: Evaluation of Accelerated Laboratory Test Methods to Predict Sealant Staining of Stone Substrates - 01 January 1998

STP15663S: An Examination of Yearly and Daily Temperature Change and Its Significance to the Evaluation of Sealant Performance - 01 January 1998

STP15679S: Comparison of Various Test Methods for Assessing the Long Term Fluid Migration Potential for Sealants - 01 January 1998

STP15680S: Finite Element Analysis as a Design Tool for Thermoplastic Vulcanizate Glazing Seals - 01 January 1998

STP15681S: Finite Element Analysis of a Structural Silicone Shear Bead Used in Skylight Applications - 01 January 1998

STP15664S: Laboratory and Exterior Durability of High Performance Acrylic Sealants - 01 January 1998

STP15682S: Glazing Sealant Movement Ability as a Function of Joint Geometry - 01 January 1998

STP15684S: Firestopping Through-Penetrations - 01 January 1998

STP15685S: Sealants and Coatings for Secondary Containment - 01 January 1998

STP15686S: Design Accommodation of Architectural and Structural Movement Systems Within Building Seals and Sealants for Spaceframes and Skylights - 01 January 1998

STP15665S: Effect of Cross-Sectional Shapes of Polysulfide Sealant on Shear Fatigue Resistance to Sliding Joint Movement - 01 January 1998

STP15666S: Laboratory Cyclic fatigue Test of Silicone Sealant Mini-Specimens - 01 January 1998

STP15667S: Results from the University of Leipzig Project Concerning the Long-Term Stability of Elastomeric Building Sealants - 01 January 1998

STP15668S: Summary of Accelerated Weathering and Other Durability Studies and the Correlation to Real Weather - 01 January 1998

STP15669S: Destruction of Sealant in Building Envelope Joints by Birds - 01 January 1998

STP12838S: Improving the Reliability of the Ceramic-On-Ceramic Wear Couple in THR - 01 January 1998

STP12839S: Wear Behavior of Ceramic Pairs Compared on Different Testing Configurations - 01 January 1998

STP12842S: Self-Reinforced Composite Polyethylene (SRC-PE): A Novel Material for Orthopedic Applications - 01 January 1998

STP12843S: An UHMWPE Homocomposite for Joint Prostheses - 01 January 1998

STP12844S: Characterization of Carbon Fiber-Reinforced Peek Composite for Use as a Bearing Material in Total Hip Replacements - 01 January 1998

STP14158S: Spray Retention is Affected by Spray Parameters, Species, and Adjuvants - 01 January 1998

STP14159S: Surfactants Differ in Their Effect on Droplet Retention, Droplet Spread, and Herbicide Efficacy - 01 January 1998

STP14160S: Spreading Mechanisms of “Superwetters” on Hydrophobic Surfaces - 01 January 1998

STP14161S: Trisiloxane Surfactants — Mechanisms of Spreading and Wetting - 01 January 1998

STP14162S: Methyl Vinyl Ether Maleic Acid Half Ester Copolymers as Dispersing Agents in Aqueous Flowable Formulations - 01 January 1998

STP14151S: Endocrine Issues Update - 01 January 1998

STP14164S: Fatty Methyl Esters as Solvent Alternatives for Emulsifiable Concentrate Formulations - 01 January 1998

STP14165S: Dearomatized Tailor Made Hydrocarbon Fluids in Pesticide Formulations - 01 January 1998

STP14166S: Deactivated Clay Carrier - 01 January 1998

STP14167S: Pesticide Stability Versus Clay Carrier Surface Acidity - 01 January 1998

STP14168S: Liquid Matrices For Insecticides for “Pour On” Applications In Queous Medium — Amitraz as A Case Study - 01 January 1998

STP14169S: Formulation and Delivery Systems for Enhanced and Extended Activity of Biopesticides - 01 January 1998

STP14170S: Correlation of Adjuvant Physico-Chemical Properties and Glyphosate Efficacy - 01 January 1998

STP14171S: Physico-Chemical Properties of Several Commercial Organosilicones, Their Blends, and Selected Other Adjuvants - 01 January 1998

STP14172S: Methodology for Evaluation of Glyphosate Formulations - 01 January 1998

STP14173S: Fluorescence as a Tool for Optimizing Adjuvants with a Photosynthesis-Inhibiting Herbicide - 01 January 1998

STP14152S: The Regulatory Role of the Applicator in Developing, Approving, Using, and Monitoring Pesticides - 01 January 1998

STP14174S: Surfactant Phytotoxicity to Barley Plants and Calli - 01 January 1998

STP14175S: The Potential of Corn Syrup as an Adjuvant for Postemergence Herbicides - 01 January 1998

STP14150S: Changing Agricultural Practices and the Future of Pesticides and Adjuvants - 01 January 1998

STP14153S: Pest Control with Sprays — A Look into the Past and a Glimpse of the Future - 01 January 1998

STP14154S: Direct Chemical Injection and Small Volume Returnable Container Technology - 01 January 1998

STP14155S: Effects of Flow Rate and Rotational Speed on Performance of Two Rotary Atomizers - 01 January 1998

STP14156S: Qualitative Properties of Spray Deposits — Patterns and Statistics - 01 January 1998

STP14157S: Effects of Adjuvants and Dynamic Surface Tension on Spray Properties Under Simulated Aerial Conditions - 01 January 1998

STP1307-EB: Characterization and Properties of Ultra-High Molecular Weight Polyethylene - 01 January 1998

STP1334-EB: Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: 7th Volume - 01 January 1998

STP1347-EB: Pesticide Formulations and Application Systems: Eighteenth Volume - 01 January 1998

STP14163S: Developing Emulsifiable Concentrate Formulations Using Droplet Size and Experimental Design Software - 01 January 1998

STP18272S: Accuracy Assessment of the Singular-Field-Based Mode-Mix Decomposition Procedure for the Prediction of Delamination - 01 January 1997

STP1242-EB: Composite Materials: Testing and Design, Thirteenth Volume - 01 January 1997

STP18273S: Compression Buckling Behavior of Laminated Composite Panels - 01 January 1997

STP18274S: Statistical Microbuckling Propagation Model for Compressive Strength Prediction of Fiber-Reinforced Composites - 01 January 1997

STP18275S: Compressive Strength of Unidirectional Composites: Measurement and Prediction - 01 January 1997

STP18276S: A Comparison of Life Prediction Methodologies for Titanium Matrix Composites Subjected to Thermomechanical Fatigue - 01 January 1997

STP18277S: An Evaluation of Two Fabrication Methods for Hybrid Titanium Composite Laminates - 01 January 1997

STP18278S: Modification of the Three-Rail Shear Test for Composite Materials Under Static and Fatigue Loading - 01 January 1997

STP18279S: A Coulomb-Mohr Type Criterion for Matrix Mode Failure in a Lamina - 01 January 1997

STP18268S: Probabilistic Composite Design - 01 January 1997

STP18280S: Effect of Moisture on E-Glass/Epoxy Interfacial and Fiber Strengths - 01 January 1997

STP18267S: Design and Testing of Composite Flywheel Rotors - 01 January 1997

STP18269S: Durability and Damage Tolerance: Testing, Simulation, and Other Virtual Realities - 01 January 1997

STP18270S: Characterizing Static and Fatigue Interlaminar Fracture Behavior of a First Generation Graphite/Epoxy Composite - 01 January 1997

STP18271S: Mode I, Mode II, and Mixed Mode Interlaminar Fracture of Woven Fabric Carbon/Epoxy - 01 January 1997

STP16220S: Characterization of Ceramic Matrix Composite Tubes Under Uniaxial/Biaxial Monotonic and Cyclic Loading - 01 January 1997

STP16222S: Instability and Failure of Corrugated Core Sandwich Cylinders Under Combined Stress - 01 January 1997

STP16223S: Crack Propagation in Cruciform IMI 834 Specimens Under Variable Biaxial Loading - 01 January 1997

STP19924S: Effects of Fiber Bridging and Fiber Fracture on Fatigue Cracking in a Titanium-Matrix Composite - 01 January 1997

STP1285-EB: Composite Materials: Fatigue and Fracture (Sixth Volume) - 01 January 1997

STP19925S: Stress-Ratio Effect on Mode II Propagation of Interlaminar Fatigue Cracks in Graphite/Epoxy Composites - 01 January 1997

STP19926S: The Fatigue Growth of Internal Delaminations Under Compressive Loading of Cross-Ply Composite Plates - 01 January 1997

STP19927S: Prediction of Delamination Growth Under Cyclic Loading - 01 January 1997

STP19928S: A Strength-Based Wearout Model for Predicting the Life of Composite Structures - 01 January 1997

STP19929S: On the Determination of Tensile and Compressive Strengths of Unidirectional Fiber Composites - 01 January 1997

STP19930S: The Influence of Transverse Bearing Loads Upon the Bypass Strength of Composite Bolted Joints - 01 January 1997

STP19931S: Residual Strength of Metal-Matrix Laminated Panels - 01 January 1997

STP19932S: Impact Damage Resistance and Residual Property Assessment of [0/±45/90]sSCS-6/TIMETAL 21S - 01 January 1997

STP19920S: Failure of a Titanium Metal-Matrix Composite Cylindrical Shell Under Internal Pressure - 01 January 1997

STP19933S: The Relationship Between Critical Strain Energy Release Rate and Fracture Mode in Multidirectional Carbon-Fiber/Epoxy Laminates - 01 January 1997

STP19934S: Experimental Compliance Calibration for the Mixed-Mode Bending (MMB) Specimen - 01 January 1997

STP19935S: Separation of Crack Extension Modes in Composite Delamination Problems - 01 January 1997

STP19936S: Fracture Analysis of Internally Delaminated Unsymmetric Laminated Composite Plates - 01 January 1997

STP19937S: Modeling Crack Extension in Chopped-Fiber Composites - 01 January 1997

STP19938S: Hygrothermal Influence on the Free-Edge Delamination of Composites Under Compressive Loading - 01 January 1997

STP19939S: Environmental Effects on the Isothermal and Thermomechanical Fatigue of SCS-6/TIMETAL 21S Unidirectional Composites - 01 January 1997

STP19940S: Analysis of the Hygrothermal Effects and Parametric Study of the Edge Crack Torsion (ECT) Mode III Test Layups - 01 January 1997

STP19941S: Influence of Environmental and Geometric Parameters on the Behavior of Fastener Joints in Advanced Composites - 01 January 1997

STP19942S: Creep Elongation of Bolt Holes Subjected to Bearing Loads in a Polymer Matrix Composite Laminate - 01 January 1997

STP19921S: Experimental Design Methods for Assessment of Composite Damage in Recreational Structures - 01 January 1997

STP19943S: Failure Mechanisms of Woven Carbon and Glass Composites - 01 January 1997

STP19944S: Evaluation of Damage Evolution and Material Behavior in a Sigma/Ti-6242 Composite Using Nondestructive Methods - 01 January 1997

STP19945S: Static and Fatigue Interlaminar Tensile Characterization of Laminated Composites - 01 January 1997

STP19946S: The Compact Tension, C(T), Specimen in Laminated Composite Testing - 01 January 1997

STP19947S: Design and Testing of Z-Shaped Stringer-Stiffened Compression Panels—Evaluation of ARALL, GLARE, and 2090 Materials - 01 January 1997

STP19922S: Progressive Fracture in Composite Structures - 01 January 1997

STP19923S: Determination of Transverse Shear Strength Through Torsion Testing - 01 January 1997

STP19919S: Damage Tolerance of Pressurized Graphite/Epoxy Cylinders Under Uniaxial and Biaxial Loading - 01 January 1997

STP16251S: Fatigue Crack Growth Damage in Elastomeric Materials - 01 January 1997

STP16325S: Oxidation and Mechanical Damage in a Unidirectional SiC/Si3N4 Composite at Elevated Temperature - 01 January 1997

STP11371S: Creep-Fatigue Interaction in Delamination Crack Propagation of Advanced CFRPs at High Temperatures - 01 January 1997

STP1302-EB: High Temperature and Environmental Effects on Polymeric Composites: 2nd Volume - 01 January 1997

STP11372S: Characterization of a Graphite/Epoxy Composite Under In-Plane Shear Fatigue Loading - 01 January 1997

STP11373S: High Temperature and Environmental Effects on the Durability of Ti-6AI-4V/FM5 Adhesive Bonded System - 01 January 1997

STP11374S: Long-Term Isothermal Aging Effects on Carbon Fabric-Reinforced PMR-15 Composites: Compression Strength - 01 January 1997

STP11365S: Mechanisms of Property Improvements of Polymer Composites by Thermomechanical Treatment - 01 January 1997

STP11375S: Microscopic Study of Surface Degradation of Glass Fiber-Reinforced Polymer Rods Embedded in Concrete Castings Subjected to Environmental Conditioning - 01 January 1997

STP11364S: Materials and Mechanics Analyses of Durability Tests for High-Temperature Polymer Matrix Composites - 01 January 1997

STP11376S: Use of Thermogravimetric Analysis to Develop Accelerated Test Methods to Investigate Long-Term Environmental Effects on Fiber-Reinforced Plastics - 01 January 1997

STP11377S: Combined Effects of the Low-Earth-Orbit Environment on Polymeric Materials - 01 January 1997

STP11378S: Physical and Chemical Aging Effects in PMR-15 Neat Resin - 01 January 1997

STP11366S: Simulation Methods for Life and Remaining Strength Prediction of High-Temperature Polymeric Composites Subjected to Cyclic Loads - 01 January 1997

STP11367S: The Effects of Moisture on the Material Properties and Behavior of Thermoplastic Polyimide Composites - 01 January 1997

STP11368S: Effect of Moisture on the Interfacial Shear Strength: A Study Using the Single Fiber Fragmentation Test - 01 January 1997

STP11369S: Aging of Composites in Water: Comparison of Five Materials in Terms of Absorption Kinetics and Evolution of Mechanical Properties - 01 January 1997

STP11370S: Two-Dimensional Moisture Diffusion in Hybrid Composite Components - 01 January 1997

STP11743S: Damping Due to Grain Boundary Sliding in Zirconia and Alumina - 01 January 1997

STP11735S: Overview - 01 January 1997

STP11751S: Young's Modulus and Mechanical Loss in PZT Ceramics Associated with Phase Transitions - 01 January 1997

STP11752S: An Experimental Comparison of the In-Air and Underwater Damping Properties of Composite Cylinders - 01 January 1997

STP11753S: Amplitude-Dependent Damping in YBCO Ceramics Between 6.5 K and 290 K - 01 January 1997

STP11754S: Anelasticity of Single and Polycrystalline Materials by the Resonant Sphere Technique (RST) - 01 January 1997

STP11758S: Damping Behavior of 6061 Al/SiC/Gr Spray-Deposited Composites - 01 January 1997

STP11815S: Subcritical Crack Growth in Ceramic Composites at High Temperature Measured Using Digital Image Correlation - 01 January 1997

STP1309-EB: Thermal and Mechanical Test Methods and Behavior of Continuous-Fiber Ceramic Composites - 01 January 1997

STP11816S: Tensile and Fatigue Behavior of a Silicon Carbide/Silicon Carbide Composite at 1300°C - 01 January 1997

STP11817S: Stress-Temperature-Lifetime Response of Nicalon Fiber-Reinforced Silicon Carbide (SiC) Composites in Air - 01 January 1997

STP11818S: Fatigue Crack Growth Behavior of a Woven HPZ/Silicon Carbide Ceramic Matrix Composite - 01 January 1997

STP11819S: Creep-Rupture Behavior of a Nicalon/SiC Composite - 01 January 1997

STP11811S: Effect of High Strain Rate on the Tensile Behavior of Nicalon™/Cas Continuous-Fiber Ceramic Composites. - 01 January 1997

STP11820S: Retained Tensile Properties and Performance of an Oxide-Matrix Continuous-Fiber Ceramic Composite After Elevated-Temperature Exposure in Ambient Air - 01 January 1997

STP11821S: Characterization of Damage Progression in Ceramic Matrix Composites Using an Integrated NDE/Mechanical Testing System - 01 January 1997

STP11822S: Infrared-Based NDE Methods for Determining Thermal Properties and Defects in Ceramic Composites - 01 January 1997

STP11823S: Measurement of Orthotropic Elastic Constants of Ceramic Matrix Composites from Impact Sound - 01 January 1997

STP11824S: On the Optimal Design of Fiber-Reinforced Laminates - 01 January 1997

STP11825S: A Model for the Creep Response of Oxide-Oxide Ceramic Matrix Composites - 01 January 1997

STP11826S: Fatigue Life Modeling of Hybrid Ceramic Matrix Composites - 01 January 1997

STP11827S: Secondary Processing Effects and Damage Mechanisms in Continuous-Fiber Ceramic Composites - 01 January 1997

STP11828S: Design, Fabrication, and Burner Rig Testing of Three-Dimensional Woven Ceramic Matrix Composite Flanged Hoop Subelements - 01 January 1997

STP11812S: Shear Strength of Continuous Fiber Ceramic Composites - 01 January 1997

STP11810S: Influence of Test Mode, Test Rate, Specimen Geometry, and Bending on Tensile Mechanical Behavior of a Continuous Fiber Ceramic Composite - 01 January 1997

STP11813S: Unloading-Reloading Sequences and the Analysis of Mechanical Test Results for Continuous Fiber Ceramic Composites - 01 January 1997

STP11814S: The Effect of Hold Times on the Fatigue Behavior of an Oxide/Oxide Ceramic Matrix Composite - 01 January 1997

STP11876S: In Situ Damage Progression in General Layup Composites - 01 January 1997

STP11878S: Damage, Fatigue, and Failure of Ceramic-Matrix Composites - 01 January 1997

STP11896S: Optical Measurement of Biaxial Strain in Thin Film Polymers - 01 January 1997

STP12062S: Oxygen Compatibility of Polymers Including TFE-Teflon®, Kel-F® 81, Vespel® SP-21, Viton® A, Viton® A-500, Fluorel®, Neoprene®, EPDM, Buna-N, and Nylon 6,6 - 01 January 1997

STP12063S: Oxygen Compatibility of FKM Elastomers - 01 January 1997

STP12064S: Ignitibility in Air, Gaseous Oxygen and Oxygen-Enriched Environments of Polymers Used in Breathing-Air Devices - 01 January 1997

STP12065S: Combustion Testing of Non-Metallic Materials in Ambient and Oxygen-Enriched Atmospheres - 01 January 1997

STP12066S: Fuel Cell Elastomeric Materials Oxygen Compatibility Testing: Effect of 450 and 6200 kPa Oxygen - 01 January 1997

STP12067S: Characterization of Polymers Found in an Oxygen Environment - 01 January 1997

STP12068S: Relative Performance of Elastomeric Materials in the Seal Configuration Test Apparatus - 01 January 1997

STP12069S: Ignitibility of Advanced Composites in Liquid and Gaseous Oxygen - 01 January 1997

STP12045S: Failure of PTFE-Lined Flexible Hose in Oxygen Service - 01 January 1997

STP12047S: Design Strategies for Polymer-Lined Flex-Hose Distance/Volume Pieces - 01 January 1997

STP12275S: A Variability Study on the ASTM Thin Slicing and Scaling Test Method for Evaluating the Long-Term Performance of an Extruded Polystyrene Foam Blown with HCFC-142b - 01 January 1997

STP12277S: A Review of Expanded Polystyrene (EPS) Properties, Performance and New Applications - 01 January 1997

STP12305S: Progressive Damage and Residual Strength of Notched Composite Laminates: A New Effective Crack Growth Model - 01 January 1997

STP12301S: Effect of Interfacial Characteristics on Mode I Fracture Behaviour of Glass Woven Fabric Composites Under Static and Fatigue Loading - 01 January 1997

STP12336S: Finite Element Analysis on the Fracture of Rubber Toughened Polymer Blends - 01 January 1997

STP13815S: Thermoanalytical Approach for Differentiation Between Surface and Bulk Oxidation for Polyethylene Films - 01 January 1997

STP1326-EB: Oxidative Behavior of Materials by Thermal Analytical Techniques - 01 January 1997

STP13816S: Thermo-Oxidative Degradation of Irradiated Ethylene Tetrafluoroethylene - 01 January 1997

STP13817S: Thermal Oxidative Stability of Fiber-Reinforced Epoxy Composite Materials - 01 January 1997

STP13818S: Laboratory Simulation of Oxidative Aging of Asphalt - 01 January 1997

STP13819S: Development of a Standard Test Method for Determining Oxidative Induction Time of Hydrocarbons by Differential Scanning Calorimetry and Pressure Differential Scanning - 01 January 1997

STP13820S: Comparative Techniques for Oxidative Induction Time (OIT) Testing - 01 January 1997

STP13821S: Estimation of Bias in the Oxidative Induction Time Measurement by Pressure DSC - 01 January 1997

STP13822S: Oxidative Induction Time (OIT) Determinations of Polyethylenes: Influences of Temperature, Pressure, and Crucible Materials on the Result - 01 January 1997

STP13823S: A Proposed Reference Material for Oxidative Induction Time by Differential Scanning Calorimetry - 01 January 1997

STP13824S: Abbreviated Oxidative Induction Time Method Without Heating/Cooling and Gas Switching - 01 January 1997

STP13825S: Oxidation as a Contamination in Measurements Involving Self-Generated Atmospheres - 01 January 1997

STP13810S: Thermal Studies on the Combustion Process of Treated and Untreated Cellulose - 01 January 1997

STP13808S: Oxidative Induction Time — A Review of DSC Experimental Effects - 01 January 1997

STP13811S: Further Studies on Oxidative Induction Test on Medical Polymers - 01 January 1997

STP13812S: The use of Thermal Analysis to Assess Oxidative Damage in Polyolefins - 01 January 1997

STP13813S: Evaluation of the Oxidation Behavior of Polyethylene Geomembranes Using Oxidative Induction Time Tests - 01 January 1997

STP13814S: Thermal Oxidative Behavior of Readily Available Reference Polymers - 01 January 1997

STP13837S: Comparison of Droplet Spectra of Fluorescent Tracers Commonly used to Measure Pesticide Deposition and Drift - 01 January 1997

STP13838S: Effect of Shielding Spray Boom on Spray Deposition - 01 January 1997

STP13839S: Effect of Surface Charge/Particle Size of a Latex Particle on Transport Through Soil - 01 January 1997

STP13840S: A Review of the Measurement of Wettability for Agricultural Applications - 01 January 1997

STP13841S: A Review of Surfactants Used in Novel Agricultural Applications - 01 January 1997

STP13842S: Hydrolytic Stability of Phosphate Ester Surfactants - 01 January 1997

STP13843S: Foam Control in Trisiloxane Alkoxylate Systems - 01 January 1997

STP13844S: Why Organosilicone Adjuvants Spread - 01 January 1997

STP13830S: Oxo-Alcohol Acetates: A New Family of Inerts for Agricultural Chemical Use - 01 January 1997

STP13845S: Solid Adjuvant Systems — Formulations, Stability, and Efficacy - 01 January 1997

STP13846S: Dry Concentrate (DC) Spray Adjuvants - 01 January 1997

STP13847S: Lipophilic Chemistry Affects Surfactant Phytotoxicity and Enhancement of Herbicide Efficacy - 01 January 1997

STP13848S: Linear Alcohol Ethoxylates Affect Glyphosate and Fluazifop-P Deposits - 01 January 1997

STP13849S: Mon 37532 Phytotoxicity is Affected by Surfactant and Ammonium Nitrate - 01 January 1997

STP13850S: Measuring Proton Extrusion from Cell Membranes of Barley Calli to Evaluate Surfactant Phytotoxicity - 01 January 1997

STP13851S: Triton X-45: A Unique Effect on Growth Regulator Sorption by and Penetration of Isolated Plant Cuticles - 01 January 1997

STP13831S: Water in Oil Microemulsion Aerosol Systems for Insecticidal Compositions - 01 January 1997

STP13832S: Trifluralin 10% Granular Formulation Prepared on Biodac® and Clay for the Control of Annual Ryegrass, Giant Foxtail and Carpet Weed. - 01 January 1997

STP13833S: Stable Formulation of Easy Hydrolizing Actives Based on Specialty Silicas Shown on Malathion as a Modelling Substance. - 01 January 1997

STP13828S: New Developments in the Regulation of Pesticide Inert Ingredients in the United States - 01 January 1997

STP13834S: Targeted Delivery of Pesticides from Matricap™ Compositions - 01 January 1997

STP13835S: Liquid Formulations of Non-Spore Forming Microorganisms - 01 January 1997

STP13836S: New Paradigms in Formulating Mycoinsecticides - 01 January 1997

STP19899S: Performance of Chemical Protective Gloves in the Film and Print Processing Industry - 01 January 1997

STP19900S: Limiting Dermal Exposure of Workers to Pesticides from Contaminated Clothing - 01 January 1997

STP19901S: Impact of Computational Methods Used on Pesticide Residue Reported in Cotton, Polyester, and Cotton/Polyester Blend Fabrics - 01 January 1997

STP19914S: Protective Clothing for Workers in Pesticide Manufacturing Plants in India: A Needs Assessment Survey - 01 January 1997

STP12073S: Flammability of Intestinal Gases During Nitrous Oxide Anesthesia - 01 January 1997

STP1328-EB: Pesticide Formulations and Application Systems: 17th Volume - 01 January 1997

STP13829S: Development of Emulsifiable Concentrate Formulations Using Experimental Design Software - 01 January 1997

STP18221S: Crack-Bridging Effects in Notch Fatigue of SCS-6/TIMETAL 21S Composite Laminates - 01 January 1996

STP1253-EB: Life Prediction Methodology for Titanium Matrix Composites - 01 January 1996

STP18222S: High Temperature/High Frequency Fatigue Crack Growth in Titanium Metal Matrix Composites - 01 January 1996

STP18223S: Modeling and Prediction of Crack Arrest in Fiber-Reinforced Composites - 01 January 1996

STP18224S: Sustained Load Behavior of SCS-6/TIMETAL 21S Composite - 01 January 1996

STP18225S: Inelastic Deformation Mechanisms in SCS-6/Ti 15-3 Metal Matrix Composite (MMC) Lamina Under Compression - 01 January 1996

STP18226S: A Fully Associative, Nonlinear Kinematic, Unified Viscoplastic Model for Titanium-Based Matrices - 01 January 1996

STP18227S: Inelastic Deformation of Titanium Matrix Composites Under Multiaxial Loading - 01 January 1996

STP18216S: Effects of Reaction Layer on Interfacial Shear Properties and Strength of Fiber in Silicon-Carbide (SiC) Fiber-Reinforced Titanium Alloy Composite - 01 January 1996

STP18228S: Time-Dependent Deformation of Titanium Metal Matrix Composites - 01 January 1996

STP18229S: A Comparison of Analysis Tools for Predicting the Inelastic Cyclic Response of Cross-Ply Titanium Matrix Composites - 01 January 1996

STP18230S: Modeling of Thermomechanical Fatigue in (0/±45/90)s Sigma/TIMETAL 21S Laminates - 01 January 1996

STP18231S: Prediction of Matrix Fatigue Crack Initiation from Notches in Titanium Matrix Composites - 01 January 1996

STP18232S: Fatigue Damage Evolution and Degradation of Mechanical Properties in Silicon-Carbide (SiC) Fiber-Reinforced Titanium Matrix Composites - 01 January 1996

STP18234S: Characterization of Damage Progression in SCS-6/TIMETAL 21S [0]4 Under Thermomechanical Fatigue Loading - 01 January 1996

STP18235S: Fatigue Maps for Titanium Matrix Composites - 01 January 1996

STP18217S: Fiber-Matrix Micromechanics and Microstructural Observations Under Tensile and Cyclic Loading - 01 January 1996

STP18236S: Characterization of Crack Growth Resistance Under Cyclic Loading in the Presence of an Unbridged Defect in Fiber-Reinforced Titanium Metal Matrix Composites - 01 January 1996

STP18237S: A Hot-Spot Thermal Fatigue Test of a Titanium Matrix Composite - 01 January 1996

STP18238S: A Methodology to Predict Damage Initiation, Damage Growth, and Residual Strength in Titanium Matrix Composites - 01 January 1996

STP18240S: Simulation of Fatigue Behavior of High Temperature Metal Matrix Composites - 01 January 1996

STP18241S: Life Prediction for Bridged Fatigue Cracks - 01 January 1996

STP18242S: Modeling and Life Prediction Methodology for Titanium Matrix Composites Subjected to Mission Profiles - 01 January 1996

STP18218S: The Role of Frictional Sliding in Transverse Failure of a Titanium Aluminide Composite - 01 January 1996

STP18243S: Life Prediction of a [0/90] Metal Matrix Composite Under Isothermal and Thermomechanical Fatigue - 01 January 1996

STP18215S: Interfacial Mechanics and Macroscopic Failure in Titanium-Based Composites - 01 January 1996

STP18219S: Issues Related to Prediction of Residual Stresses in Titanium Alloy Matrix Composites - 01 January 1996

STP18220S: Stress Transfer Mechanics: Models that Should be the Basis of Life Prediction Methodology - 01 January 1996

STP14715S: Validation of Disinfectants Used in Biotechnology Facilities - 01 January 1996

STP15582S: A Methodology to Identify Safer Chemical Products - 01 January 1996

STP16455S: Analysis of the Thermoviscoplastic Behavior of [0/90] SCS-6/TIMETAL®21S Composites - 01 January 1996

STP16456S: Analysis of the Thermo-Mechanical Fatigue Response of Metal Matrix Composite Laminates with Interfacial Normal and Shear Failure - 01 January 1996

STP16459S: Thermomechanical Fatigue Damage Mechanism Maps for Metal Matrix Composites - 01 January 1996

STP16460S: An Experimental and Analytical Investigation of Titanium Matrix Composite Thermomechanical Fatigue - 01 January 1996

STP16461S: Time- and Cycle-Dependent Aspects of Thermal and Mechanical Fatigue in a Titanium Matrix Composite - 01 January 1996

STP16462S: Modeling the Crack Growth Rates of a Titanium Matrix Composite Under Thermomechanical Fatigue - 01 January 1996

STP16035S: An Overview on the Development of Wettable Powder Formulations - 01 January 1996

STP16036S: Granular Pesticide Formulations - 01 January 1996

STP16037S: Water Dispersible Granule Formulation Techniques - 01 January 1996

STP16038S: Suspoemulsions with Improved Stability and Correlation of Long Term Stability with the Zeta Potential - 01 January 1996

STP16039S: The Relation of Tallowamine Ethoxylates to Dynamic Surface Tension and Field Performance - 01 January 1996

STP16040S: Solid Adjuvants Based on Urea-Surfactant Adducts - 01 January 1996

STP16041S: Superior Multipurpose Adjuvant System for Rainfastness and UV Protection - 01 January 1996

STP16042S: Evaluation of the Rain Fastness of Pesticide Formulations Using Simulated Leaf Surfaces with a Visual Rating System - 01 January 1996

STP16043S: Dearomatized Tailor-made Hydrocarbon Fluids in Co-Adjuvants or Adjuvants in Tank Mixes - 01 January 1996

STP16044S: Surfactant Effects on Aerial Spray Droplet Spectra - 01 January 1996

STP16029S: Influence of Droplet Sizes of Deposits on Persistence of Bacillus Thuringiensis Applied as an Aqueous Flowable, and Azadirachtin Applied as a Nonaqueous Solution, Onto Oak Foliage - 01 January 1996

STP16027S: Effect of Electrostatic Charging on the Dose Transfer of Water-Based Pesticide Mixtures - 01 January 1996

STP16030S: A Novel Method to Determine Mass Median Diameter and In-Flight Evaporation of Aerially Sprayed Droplets Deposited on Artificial Samplers at Ground Level - 01 January 1996

STP16031S: The Influence of Cosurfactant and Role of Spreading in Stomatal Infiltration by Organosilicone - 01 January 1996

STP16032S: The Role of Orchex® 796 in Pesticide Applications - 01 January 1996

STP16033S: Photolytic Degradation of Formulated Avermectins: Effect of P-Aminobenzoic Acid (PABA) - 01 January 1996

STP16034S: Phosphate Ester Compositions by Design - 01 January 1996

STP16053S: Physical-Chemical Changes in Silicone Elastomers Used for Building Sealants - 01 January 1996

STP16054S: Structural Behavior of Silicone Bonded Glass Block Panels - 01 January 1996

STP16055S: Effects of Weatherproofing Sealants on Building Aesthetics — Part II - 01 January 1996

STP16056S: Staining Potential of Sealants In/On Exterior Wall Substrates - 01 January 1996

STP16057S: Laboratory Testing of Sealants with a Marble Substrate - 01 January 1996

STP16058S: Performance-based Adhesion Testing of Structural Sealants - 01 January 1996

STP16059S: An Analysis of the 180° Peel Test for Measuring Sealant Adhesion - 01 January 1996

STP16060S: Improvement of Initial Adhesion to Aluminum of Insulating Glass Polyurethane Sealants Using a Tertiary Amine Based Curing System - 01 January 1996

STP16061S: The Effect of Artificial Weathering and Movement Accommodation Testing on Building Sealants - 01 January 1996

STP16062S: Evaluation of Cyclic Fatigue as a Means of Assessing the Performance of Construction Joint Sealants: Polyurethane Sealants - 01 January 1996

STP16063S: Evaluation of Various Generic Types of Building Sealants Against ASTM C-920, Standard Specification for Elastomeric Joint Sealants - 01 January 1996

STP16064S: A Review of Recent Developments and Improvements in Accelerated Outdoor and Indoor Xenon Weathering Devices and Methodologies - 01 January 1996

STP16047S: Recent Developments in the Design of Sealant Joints for Movement and Other Effects - 01 January 1996

STP16048S: A Comparison of Different Sealant Butt Joint Shapes - 01 January 1996

STP16049S: Building Sealants in Russia - 01 January 1996

STP16050S: Case Study of Sealant Reversion - 01 January 1996

STP16051S: History of Building Joint Sealants - 01 January 1996

STP16052S: Structural Silicone in Curtain Walls - 01 January 1996

STP16541S: Analysis of Test Methods for Characterizing Skin/Stringer Debonding Failures in Reinforced Composite Panels - 01 January 1996

STP1274-EB: Composite Materials: Testing and Design: Twelfth Volume - 01 January 1996

STP16542S: Mechanical Performance of Composite Sandwich Beams with Syntactic Foam Cores - 01 January 1996

STP16543S: Characterization of Localized Failure Modes in Honeycomb Sandwich Panels Using Indentation - 01 January 1996

STP16544S: Analysis of Mode III Delamination Fracture Testing Using a Midplane Edge Crack Torsion Specimen - 01 January 1996

STP16545S: Comparison of Static and Impact Energy Absorption of Carbon Fiber/PEEK Composite Tubes - 01 January 1996

STP16549S: In-Phase Thermomechanical Fatigue of Metal Matrix Composites: Deformation Response and Progressive Damage Mechanisms - 01 January 1996

STP16550S: Constitutive Response and Deformation Mechanisms in Unidirectional Metal Matrix Composites Under Compression - 01 January 1996

STP16551S: Micromechanical Characterization of Nonlinear Behavior of Advanced Polymer Matrix Composites - 01 January 1996

STP16552S: Analysis of the Short-Beam Shear Test for Unidirectional Composites - 01 January 1996

STP16553S: Design and Evaluation of Three Methods for Testing Extension-Twist-Coupled Laminates - 01 January 1996

STP16554S: Design Allowables from Regression Models Using Data from Several Batches - 01 January 1996

STP16555S: Using a Mixed-Mode Fatigue Delamination Criterion - 01 January 1996

STP16537S: Characterization of Heat Damage in Graphite/Epoxy Composites - 01 January 1996

STP16556S: Effect of Stacking Sequence on Delamination Toughness and Delamination Growth Behavior in Composite End-Notched Flexure Specimens - 01 January 1996

STP16538S: Environmental Stress Cracking and Solvent Effects in High-Performance Polymeric Composites - 01 January 1996

STP16539S: Influence of Fiber-matrix Interphase on the Long-term Behavior of Graphite/ Epoxy Composites - 01 January 1996

STP16536S: Effects of Physical Aging at Elevated Temperatures on the Viscoelastic Creep of IM7/K3B - 01 January 1996

STP16540S: Damage Mechanics on Hydrothermal-Aged Fiber-Reinforced Plastics (FRP) - 01 January 1996

STP38229S: Effect of Temperature and Fiber Coating on the Strength of E-Glass Fibers and the E-Glass/Epoxy Interface for Single-Fiber Fragmentation Samples Immersed in Water - 01 January 1996

STP1290-EB: Fiber, Matrix, and Interface Properties - 01 January 1996

STP38230S: A New Technique to Study the Interfacial Strength and Transverse Cracking Scenario in Composite Materials - 01 January 1996

STP38231S: Characteristics of Fatigue Life and Damage Accumulation of Short Fiber-Reinforced Polymer Composites - 01 January 1996

STP38232S: Fiber/Matrix Interface Studies Using Fragmentation Test - 01 January 1996

STP38233S: Fiber/Matrix Interface Effect on Monotonic and Fatigue Behavior of Unidirectional Carbon/Epoxy Composites - 01 January 1996

STP38223S: Interfacial Measurements and Fracture Characteristics of Single and Multi-Fiber Composites by Remote Laser Raman Microscopy - 01 January 1996

STP38221S: Nonlinear Elastic Characterization of Carbon Fibers - 01 January 1996

STP38224S: The Use of Interfacial Test Methods in Composite Materials Development - 01 January 1996

STP38225S: Analysis of Stress Transfer from the Matrix to the Fiber through an Imperfect Interface: Application to Raman Data and the Single-Fiber Fragmentation Test - 01 January 1996

STP38226S: Modeling the Dynamic Response of the Fiber/Matrix Interphase in Continuous Fiber Composite Materials - 01 January 1996

STP38227S: Direct Observation of Debonding in Fiber Pull-Out Specimens - 01 January 1996

STP38228S: Interlaboratory Study of Adhesion Using Voltage Contrast XPS - 01 January 1996

STP38222S: Methods of Determining the Temperature Dependence of Primary Creep - 01 January 1996

STP16129S: Methodologies for Predicting the Thermomechanical Fatigue Life of Unidirectional Metal Matrix Composites - 01 January 1996

STP16130S: Evolution of Bridging Fiber Stress in Titanium Metal Matrix Composites at Elevated Temperature - 01 January 1996

STP16131S: Thermomechanical Fatigue of Polymer Matrix Composites - 01 January 1996

STP16132S: Cumulative Fatigue Damage of Angle-Plied Fiber-Reinforced Elastomer Composites and Its Dependence on Minimum Stress - 01 January 1996

STP16160S: Estimation of Durability of GFRP Laminates Under Stress-Corrosive Environments Using Acoustic Emission - 01 January 1996

STP11703S: Quantification of Dna Adducts in Small Fish Exposed to Alkylating Agents - 01 January 1996

STP11343S: Off-Target Drift with Air-Assisted Agricultural Sprayers - 01 January 1996

STP11344S: The “Double Nozzle” — A New Way of Reducing Drift and Improving Dose-Transfer? - 01 January 1996

STP11345S: Solvent Effects in Degradation Kinetics of Emamectin Benzoate - 01 January 1996

STP11346S: Aerosol Formulations for Thermal Aerosol Generators - 01 January 1996

STP11347S: Application of an Aerosol Formulation to Potato Storages - 01 January 1996

STP11348S: Some of the Difficulties Encountered When Assessing Foamers for Bout Markers - 01 January 1996

STP11349S: Interactive Surface Chemistry Studies of Methyl Elster Adjuvants and Selected Targets Yield a New Methodology to Guide Formulators - 01 January 1996

STP11350S: Relationship Between Spray Droplet Spread and Herbicide Phytotoxicity - 01 January 1996

STP11351S: Ethoxylated Linear Alcohols Affect Glyphosate and Fluazifop-p Spray Delivery, Retention, and Efficacy - 01 January 1996

STP11352S: Plant Response to Octylphenol and Secondary Alcohol Ethoxylates - 01 January 1996

STP11337S: The Application of Solubility Parameters to Agricultural Chemical Problems - 01 January 1996

STP11338S: Water Soluble Non-Aqueous Suspension Concentrates - 01 January 1996

STP11339S: Test Methods for Emulsifiable Concentrates - 01 January 1996

STP11340S: Rain Simulator for Laboratory Evaluation of Pesticide Rainfastness - 01 January 1996

STP11341S: Interactions of Anionic Surfactants and Polymers Used as Spray Tank Adjuvants - 01 January 1996

STP11342S: FSCBG Predictions Of Biological Dose Response Coupled To Decision Support - 01 January 1996

STP14061S: A Review of the ASTM F 1001 Battery of Chemicals and Its Effect on the Chemical Protective Clothing Industry - 01 January 1996

STP14066S: Determination of Pesticide Levels as the Result of Cross-Contamination During Laundering - 01 January 1996

STP14067S: Reproducibility of Pesticide Spray Penetration Tests with the UNCG-Clemson Spray Box - 01 January 1996

STP14068S: Solid-State Transition of Pesticide from Protective Clothing to Skin - 01 January 1996

STP14069S: Barrier Efficiency of Protective Clothing for Atrazine Production Workers - 01 January 1996

STP14070S: Chlorpyrifos Decontamination Procedures for Clothing and Equipment - 01 January 1996

STP14071S: Clothing Contamination Resulting from Greenhouse Spraying of Pesticides - 01 January 1996

STP14072S: Estimated Costs of Home Laundering Pesticide Contaminated Reusable Clothing - 01 January 1996

STP14085S: Decontamination of Fluoropolymer Barrier-Based Chemical Protective Clothing - 01 January 1996

STP18233S: Matrix Fatigue Cracking in α2 Titanium Matrix Composites for Hypersonic Applications - 01 January 1996

STP18239S: Titanium Matrix Composite Durability Analyses for the Design of Airframe Structures - 01 January 1996

STP16457S: Damage Accumulation in Titanium Matrix Composites Under Generic Hypersonic Vehicle Flight Simulation and Sustained Loads - 01 January 1996

STP16458S: Fatigue Behavior of [0]8 SCS-6/Ti-6Al-4V Composite Subjected to High Temperature Turboshaft Design Cycles - 01 January 1996

STP1268-EB: Pesticide Formulations and Application Systems: 15th Volume - 01 January 1996

STP16028S: FSCBG Predictions Coupled to GPS/GIS Aircraft Tracking - 01 January 1996

STP1271-EB: Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Fifth Volume - 01 January 1996

STP16546S: Effect of Preform Architecture on Modulus and Strength of Two-Dimensional, Triaxially Braided, Textile Composite Materials - 01 January 1996

STP16547S: Through-the-Thickness Tensile Strength of Textile Composites - 01 January 1996

STP16548S: Analysis of Woven and Braided Fabric-Reinforced Composites - 01 January 1996

STP16972S: Tests for Evaluation of the Effectiveness of Penetrating Sealers in Reducing Penetration of Chlorides into Concrete - 01 January 1996

STP16298S: Adhesion Properties of Sealants in Resealed Joints - 01 January 1996

STP1286-EB: Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Sixth Volume - 01 January 1996

STP16299S: Movement During Cure of Latex Building Joint Sealants - 01 January 1996

STP16300S: Effect of Cross-Sectional Shapes of Polysulfide Sealant on Fatigue Resistance to Joint Movement - 01 January 1996

STP16292S: Structural Silicone Performance Testing on 2 cm Polished Granite - 01 January 1996

STP16291S: Structural Silicone Glazing: In-Service Reliability Evaluation - 01 January 1996

STP16294S: Seismic Behavior of Structural Silicone Glazing - 01 January 1996

STP16295S: Design Considerations for Sealants When Used at Horizontal Expansion Joints in Masonry Cavity Walls - 01 January 1996

STP16296S: A Case Study of the Use of Preformed, Surface-Applied Silicone Sealant Joints - 01 January 1996

STP16297S: The Relative Effects of Deformation and Aging on Sealant Behavior - 01 January 1996

STP1294-EB: Durability Testing of Nonmetallic Materials - 01 January 1996

STP16161S: Performance Degradation, Polymer Encapsulant Degradation, and Estimating Lifetimes for Photovoltaic Modules from Accelerated Testing - 01 January 1996

STP16162S: The Use of Ranked Versus Rated Data in the Evaluation of Weathered Specimens or Material - 01 January 1996

STP16150S: Factors Influencing the Reliability of Results in Accelerated Weathering Tests - 01 January 1996

STP1306-EB: Environmental Toxicology and Risk Assessment: Biomarkers and Risk Assessment: Fifth Volume - 01 January 1996

STP1306-EB: Environmental Toxicology and Risk Assessment: Biomarkers and Risk Assessment—Fifth Volume - 01 January 1996

STP1312-EB: Pesticide Formulations and Application Systems: 16th Volume - 01 January 1996

STP11336S: The Environmental Fate and Safety of Nonylphenol Ethoxylates - 01 January 1996

STP14588S: The Effect of Mode Mix on Interfacial Toughness: A Ductile Mechanism - 01 January 1995

STP1220-EB: Fracture Mechanics: 25th Volume - 01 January 1995

STP14589S: Micromechanics of Fiber-Matrix Interface and Fracture of Advanced Composites with Engineered Interfaces - 01 January 1995

STP14590S: Correlating Interphase Glass Transition and Interfacial Microcracking in Polymer Composites - 01 January 1995

STP14591S: Free Edge Problem for Bonded Orthotropic Elastic Layers - 01 January 1995

STP14592S: Interface Cracks in Thermally Loaded Multilayer Ceramic Coatings - 01 January 1995

STP14593S: Quasi-Three-Dimensional Stress Fields at an Interface Crack Tip - 01 January 1995

STP14582S: Strength Properties of Surface-Machined Components of Structural Ceramics - 01 January 1995

STP14594S: Bimaterial Problem of Strip with Debondings under Tension and Bending - 01 January 1995

STP14596S: Residual Stress Measurement in Sapphire-Fiber Composites: Through-Focus and Transmission Fluorescence Spectroscopy - 01 January 1995

STP14597S: A New Technique to Produce Josephson Junctions Based on Controlled Crack Growth Techniques - 01 January 1995

STP14601S: Two-Parameter Characterization of Crack Tip Fields in Edge-Cracked Geometries: Plasticity and Creep Solutions - 01 January 1995

STP14583S: Fracture-Resistance Curve Characteristic of a Sintered Al2O3/Zro2 Ceramic - 01 January 1995

STP14602S: Modeling of Ductile Damage and Complexity Across Scales - 01 January 1995

STP14603S: Application of Micromechanical Models to the Analysis of Ductile Fracture Under Dynamic Loading - 01 January 1995

STP14605S: The J Integral as a Fracture Criterion of Robber-Like Materials:A Comparative Study Between a Compliance Method and an Energy Separation Method - 01 January 1995

STP14606S: A Single Specimen Approach for J-Integral Evaluation for Semi-Elliptical Surface Cracks - 01 January 1995

STP14581S: Analysis of the Effect of Transformation-Induced Shear Strains on Stability and Crack Growth in Zirconia-Containing Ceramics - 01 January 1995

STP14584S: Three-Dimensional Cohesive Crack Analysis of Short-Rod Specimens - 01 January 1995

STP14611S: Analysis of Fatigue Crack Closure and Thresholds - 01 January 1995

STP14618S: Singular Integral Equation Method in the Analysis of Interaction Between Cracks and Defects - 01 January 1995

STP14619S: Surface and Subsurface Cracks and Pores with Liquid Under Action of a Contact Load in the Presence of a Lubricant - 01 January 1995

STP14585S: Defect Problems in Piezoelectric Ceramics - 01 January 1995

STP14620S: Development of Fixed Grid Finite Element Algorithm for Tracking Quasi-Static Equilibrium Crack Propagation - 01 January 1995

STP14621S: Calculation of Stress Intensity Factors for Cracks Under Thermal Shock Transients - 01 January 1995

STP14622S: The Use of Fracture Mechanics Analysis in the Design and Development of Thermoelectric Cells - 01 January 1995

STP14623S: Analysis of Stress Intensity Factors for an Edge Cracked T-Section in Tension - 01 January 1995

STP14625S: Interpretation of Warm Prestress-Induced Fracture Toughness Based on Crack-Tip Constraint - 01 January 1995

STP14586S: Experimental and Analytical Studies of Crack Initiation and Arrest in Hot Pressed Silicon Nitride - 01 January 1995

STP14587S: On the Directionality of Interfacial Cracking in Bicrystals and the Loading Phase Angle Dependence - 01 January 1995

STP14010S: Mixed Mode Interlaminar Fracture Toughness of Unidirectional Glass/Epoxy Composite - 01 January 1995

STP1230-EB: Composite Materials: Fatigue and Fracture: Fifth Volume - 01 January 1995

STP14011S: Improvement of Delamination Resistance with Carbon Nonwoven Mat Interleaves - 01 January 1995

STP14012S: Mode I and Mode II Fracture Toughness Measured Between Differently Oriented Plies in Graphite/Epoxy Composites - 01 January 1995

STP14013S: Prediction of Energy Release Rate for Edge Delamination Using a Crack Tip Element Approach - 01 January 1995

STP14014S: Stress and Energy Based Fracture Conditions for Fiber-Wise Splitting in Composites - 01 January 1995

STP14015S: Modeling of Accumulated Damage and Failure of Multidirectional Composite Plates Subjected to In-Plane Loads - 01 January 1995

STP14006S: Mode I and Mode II Delamination Growth of Interlayer Toughened Carbon/Epoxy (T800H/3900-2) Composite System - 01 January 1995

STP14016S: Shear Deformation Analysis of the Energy Release Rate of Transverse Cracking in Laminated Composites - 01 January 1995

STP14017S: A Random-Damage Finite Element for Modeling Failure in Advanced Composite Materials - 01 January 1995

STP14018S: Stacking Sequence Effects and Delamination Growth in Graphite/Epoxy Laminates Under Compression-Dominated Fatigue Loading - 01 January 1995

STP14019S: The Effect of Graphite Fiber Properties on Microcracking Due to Thermal Cycling of Epoxy-Cyanate Matrix Laminates - 01 January 1995

STP14020S: Marine Environmental Effects on Polymer Matrix Composites - 01 January 1995

STP14021S: Observations of the Load Redistribution in Polymeric Composite Laminates Under Tension-Tension Fatigue Loading - 01 January 1995

STP14022S: A New Test for Compression Testing of Impregnated Tows - 01 January 1995

STP14023S: Non-Penetrating Impact Behavior of CFRP at Low and Intermediate Velocities - 01 January 1995

STP14024S: Post-Impact Fatigue Response of Stitched Composites - 01 January 1995

STP14025S: Impact and Fatigue Resistance of a [±30°/0°] 3-D Braided Carbon Epoxy Composite - 01 January 1995

STP14026S: Influence of Impact Parameters on the Response of Laminated Composite Plates - 01 January 1995

STP14007S: Interlaminar Fracture Toughness of Glass Fiber Laminates Additionally Reinforced with Carbon Bead - 01 January 1995

STP14005S: Experimental Development of a Mixed-Mode Fatigue Delamination Criterion - 01 January 1995

STP14027S: Damage Tolerance and Arrest Characteristics of Pressurized Graphite/Epoxy Tape Cylinders - 01 January 1995

STP14028S: Fatigue and Fracture of the 767 Graphite Torsion Spring - 01 January 1995

STP14029S: Fracture of Glass-Epoxy Laminates Under Torsion and Combined Tension-Torsion Loads - 01 January 1995

STP14030S: Influence of Realistic Ply-Drop Geometries on Interlaminar Stresses in Tapered Laminates - 01 January 1995

STP14031S: Delamination in Composites with Terminating Internal Plies Under Tension Fatigue Loading - 01 January 1995

STP14008S: Delamination of Carbon/Epoxy Laminates Under Cyclic Mode II Loading - 01 January 1995

STP14009S: Mode III Delamination Using a Split Cantilever Beam - 01 January 1995

STP13001S: The U.S. EPA's Development of Pesticide Container Regulations - 01 January 1995

STP13002S: Recycling Plastic Pesticide Containers - 01 January 1995

STP13003S: Tristyrylphenol Surfactants in Agricultural Formulations : Properties and Challenges in Applications - 01 January 1995

STP13004S: Phytotoxic Evaluation of Commercial Pesticide Products Formulated with Low and High Flash Point Hydrocarbon Fluids - 01 January 1995

STP13005S: Composition Effects on Hydrocarbon Physical Properties - 01 January 1995

STP13006S: Polymers for Instant Dispersions for the Herbicide Metolachlor and Other Chloroacetanilides - 01 January 1995

STP12993S: Atomizer Design for Agricultural Air Shear Applications - 01 January 1995

STP13007S: Water Soluble and Water Dispersible Granules with Spreader-Sticker Incorporated - 01 January 1995

STP13008S: Effects of Nonionic Surfactants on Properties of Water Dispersible Granule Formulations - 01 January 1995

STP13009S: Validation of the Percent Suspensibility Test for Dry Flowables by Round Robin Testing - 01 January 1995

STP13011S: Description and Validation of a Test System to Investigate the Evaporation of Spray Droplets - 01 January 1995

STP13012S: Effect of Temperature Fluctuations and Storage Period on Pesticide Stability in Formulation Concentrates Used in Forestry - 01 January 1995

STP13013S: Nonionic Surfactant Properties and Plant Species Affect Surfactant Enhancement of Primisulfuron Phytotoxicity - 01 January 1995

STP13014S: Relation of Surfactant HLB to Glyphosate Phytotoxicity - 01 January 1995

STP13015S: Nonionic Surfactant Properties Affect Enhancement of Herbicides - 01 January 1995

STP13016S: Improving Insecticide Activity and Rain-Fastness with Polyethylenimine - 01 January 1995

STP13017S: Enzyme-Linked Immunosorbent Assay for Quantification of Bacillus Thuringiensis Var. Kurstaki Crystalline Protein in Some Commercial Formulations - 01 January 1995

STP12994S: New Equipment for Evaluation of Distribution and Sedimentation of Pesticide Formulations in Spray Tank Application - 01 January 1995

STP13018S: The influence of pH on the Performance of Organosilicone Surfactants - 01 January 1995

STP13019S: The Relationship of Spray Adjuvant Surfactant Properties to Pesticide Spray Application Volumes - 01 January 1995

STP13020S: Evaluation of Superabsorbent Polymer-Pesticide Formulations for Prolonged Insect Control - 01 January 1995

STP12992S: ASTM Committee E-35 on Pesticides - Twenty Years Old! - 01 January 1995

STP12995S: Denatonium Benzoate Use to Mitigate Pesticide Ingestion - 01 January 1995

STP12996S: Development of an Electrodyn Spray System for Sawmill Operation - 01 January 1995

STP12997S: The Effect of Dynamic Surface Tension and High Shear Viscosity on Droplet Size Distributions Produced by a Flat Fan Nozzle - 01 January 1995

STP12998S: A Review of Pesticide Formulations for Chemigation - 01 January 1995

STP12999S: Advances in Application Efficacy for Chemigation Systems with Experimental Nozzle Technology - 01 January 1995

STP13000S: Air Velocity Measurement System for In-field Characterization of Air-Assisted Agricultural Spray Equipment - 01 January 1995

STP14934S: Polysulfide Systems for Environmental Protection - 01 January 1995

STP14935S: Primerless Polysulfide Building Sealants - 01 January 1995

STP14936S: In-situ Re-Glazing of Structural Sealant Glazing Joints a Case History - 01 January 1995

STP14937S: European Insulated Glass Unit Testing - 01 January 1995

STP14928S: Evaluating the Durability of Sealants - 01 January 1995

STP14927S: Weathering of Various Sealants in the Field — A Comparison - 01 January 1995

STP14929S: Evaluation of Cyclic Fatigue as a Means of Assessing the Performance of Construction Joint Sealants: Silicone Sealants - 01 January 1995

STP14930S: Effects of Natural and Artificial Weathering on Building Sealants - 01 January 1995

STP14931S: Effects of Weatherproofing Sealants on Building Aesthetics - 01 January 1995

STP14932S: Performance of Band-Aid Sealant Joints - 01 January 1995

STP14933S: Rigid Pavement Joint Sealant Effectiveness in Reducing Chloride Intrusion - 01 January 1995

STP14642S: The Influence of Plasticity and Geometry on the Mixed Mode Fracture of PMMA - 01 January 1995

STP14670S: Instrumented Impact Testing of Polymeric Materials - 01 January 1995

STP15390S: Toxicity of Oil and Dispersed Oil to the Eggs and Larvae of Seven Marine Fish and Invertebrates from the Gulf of Mexico - 01 January 1995

STP15391S: A Research Program to Facilitate Resolution of Ecological Issues Affecting the Use of Dispersants in Marine Oil Spill Response - 01 January 1995

STP15392S: Laboratory Testing of Dispersants under Arctic Conditions - 01 January 1995

STP15393S: Dispersant Application by Fire Monitor - 01 January 1995

STP15394S: COREXIT 9580 Shoreline Cleaner: Development, Application, and Status - 01 January 1995

STP15395S: Understanding the Mechanism of Dispersion through Oil Droplet Size Measurements at Sea - 01 January 1995

STP15396S: The Effectiveness Testing of Oil Spill-Treating Agents - 01 January 1995

STP15397S: The Impact of Oil Dispersant Solvent on Performance - 01 January 1995

STP15398S: Effectiveness of Chemical Dispersants under Breaking Wave Conditions - 01 January 1995

STP15386S: Laboratory Effectiveness Testing of Oil Spill Dispersants - 01 January 1995

STP15387S: Laboratory Effectiveness Testing of Water-in-Oil Emulsion Breakers - 01 January 1995

STP15388S: Statistical Evaluations of Results of Testing Methods to Evaluate Performance of Chemical Dispersants for Oil Spills - 01 January 1995

STP15389S: Dispersant Effectiveness: Studies into the Causes of Effectiveness Variations - 01 January 1995

STP16400S: Evaluation and Significance of Fracture Toughness in Ceramic Materials - 01 January 1995

STP16401S: Analysis of Damage and Failure in Metal Matrix Composites - 01 January 1995

STP16402S: Translaminar Fracture Toughness Test Methods and Results from Interlaboratory Tests of Carbon/Epoxy Laminates - 01 January 1995

STP16403S: Cyclic Fatigue Mechanisms in Partially Stabilised Zirconia - 01 January 1995

STP16404S: Predicting Crack Growth in Continuous-Fiber Composite Materials - 01 January 1995

STP16405S: Constraint Effect on Fracture Behaviour of Adhesive Joints with Different Bond Thickness - 01 January 1995

STP15408S: Advanced Composite Material Property Data Modeling for Engineering Analysis and Design - 01 January 1995

STP15409S: The Role of Corrosion in a Material Selector Expert System for Advanced Structural Ceramics - 01 January 1995

STP15416S: Database and Knowledge Acquisition for Ceramics Design - 01 January 1995

STP15998S: Factors Influencing the Development of a Biostimulant for the In-Situ Anaerobic Dechlorination of Polychlorinated Biphenyls in Fox River, Wisconsin Sediments - 01 January 1995

STP1234-EB: Pesticide Formulations and Application Systems: Fourteenth Volume - 01 January 1995

STP13010S: USDA Forest Service Spread Factor Technology Database - 01 January 1995

STP18191S: Characterization of Failure Properties of Asphalt Binder - 01 January 1995

STP1241-EB: Physical Properties of Asphalt Cement Binders - 01 January 1995

STP18192S: Oxidation of Asphalt Binders and its Effect on Molecular Size Distribution and Consistency - 01 January 1995

STP18193S: Long Term Performance of Asphalt Cement Binders; A Dual View - 01 January 1995

STP18194S: Testing of Softening Point and Brittle Point of Asphalt Mixtures - 01 January 1995

STP18195S: Furfural Substitutes for Chemical Modification of Asphalt - 01 January 1995

STP18196S: Properties of Microwave Recycled Asphalt Cement Binders - 01 January 1995

STP18186S: The New Proposed Rheological Properties of Asphalt Binders: Why are they Required and how do they Compare to Conventional Properties - 01 January 1995

STP18197S: Physical Properties of Tall Oil Pitch Modified Asphalt Cement Binders - 01 January 1995

STP18190S: Evaluation Nevada's Binders Using SHRP Specifications - 01 January 1995

STP1243-EB: Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Fourth Volume - 01 January 1995

STP1252-EB: The Use of Chemicals in Oil Spill Response - 01 January 1995

STP16423S: The Seal Configuration Tester, a New Approach to the Evaluation of Elastomeric Materials for Oxygen Service - 01 January 1995

STP16433S: An Evaluation of Polymers as Ignition Sources During Particle Impact in Oxygen - 01 January 1995

STP16434S: Cone Calorimeter Testing of Epoxy/Fiberglass and Broninated Epoxy/Fiberglass Composites in Normal Oxygen and Oxygen-Enriched Environments - 01 January 1995

STP16437S: A Protocol for Evaluating the Cleaning Efficiency, Corrosion Property and Oxygen Compatibility of Non-Ozone Depleting Cleaning Agents - 01 January 1995

STP1185-EB: Compression Response of Composite Structures - 01 October 1994

STP1184-EB: Cyclic Deformation, Fracture, and Nondestructive Evaluation of Advanced Materials: Second Volume - 01 January 1994

STP18123S: Fatigue of a Particle-Reinforced Cast Aluminum Matrix Composite at Room and Elevated Temperatures - 01 January 1994

STP18117S: Fatigue Crack Growth Behavior of Surface Cracks in Silicon Nitride - 01 January 1994

STP18116S: In-Situ SEM Observation of Fatigue Crack Propagation in NT-154 Silicon Nitride - 01 January 1994

STP18129S: Influence of Fiber-Matrix Interface on Dynamic Response of CFRP - 01 January 1994

STP18130S: A Substructuring Approach to the Fatigue Modeling of Polymeric Matrix Composite Materials - 01 January 1994

STP18131S: The Evaluation of Fatigue Damage in Short Fiber-Reinforced Styrene-Maleic Anhydride - 01 January 1994

STP18132S: Effect of Pultrusion Process Variables on Cyclic Loading Damage of Graphite-Epoxy Composites - 01 January 1994

STP18133S: Examination of the Correlation Between NDE-Detected Manufacturing Abnormalities in MMCs and Ultimate Tensile Strength or Thermomechanical Fatigue Life - 01 January 1994

STP18118S: Fatigue Response of Metal Matrix Composites - 01 January 1994

STP18135S: Real-Time Acousto-Ultrasonic NDE Technique to Monitor Damage in SiC/CAS Ceramic Composites Subjected to Dynamic Loads - 01 January 1994

STP18136S: Nondestructive Evaluation (NDE) of Composites Using the Acoustic Impact Technique (AIT) - 01 January 1994

STP18120S: Fatigue Crack Growth and Crack Bridging in SCS-6/Ti-24-11 - 01 January 1994

STP18121S: Synthesis, Strengthening, Fatigue and Fracture Behavior of High-Strength, High-Conductivity P/M Processed Cu-Nb Microcomposite - 01 January 1994

STP24335S: A Shear Deflection Theory for Analysis of End Plugs for External Pressure Tests of Composite Cylinders - 01 January 1994

STP1185-EB: Compression Response of Composite Structures - 01 January 1994

STP24336S: The Effect of Assembly Fit-Up Gaps on the Compression Response of Thick-Section Carbon/Epoxy Composites - 01 January 1994

STP24337S: Failure of Thick Composite Cylinders Subjected to External Hydrostatic Pressure - 01 January 1994

STP24338S: The Effects of Constituent Properties on the Compression Strength of Advanced Composites - 01 January 1994

STP24339S: Experiments to Reveal the Role of Matrix Properties and Composite Microstructure in Longitudinal Compression Strength - 01 January 1994

STP24340S: The Role of Fiber, Matrix, and Interphase in the Compressive Static and Fatigue Behavior of Polymeric Matrix Composite Laminates - 01 January 1994

STP24341S: A Global and Local Investigation of Compressive Strength to Determine the Influence of the Fiber/Matrix Interphase - 01 January 1994

STP24343S: Compression-Compression Fatigue of a Stitched Uniwoven Graphite/Epoxy Composite - 01 January 1994

STP24344S: Compressive Static and Fatigue Loading of Continuous Fiber-Reinforced Composites - 01 January 1994

STP24345S: Composite Compressive Strength Prediction Using a Nonhomogeneous Foundation Model - 01 January 1994

STP24346S: An Extrapolation Method for the Evaluation of Compression Strength of Laminated Composites - 01 January 1994

STP24347S: Analysis of a Miniature Sandwich Compression Specimen - 01 January 1994

STP24330S: Application of a New Micromechanics-Based Homogenization Technique for Nonlinear Compression of Thick-Section Laminates - 01 January 1994

STP24348S: Failure Criteria and Damage Mechanisms of G-10 Woven Laminates with Cutouts Under Biaxial Compressive Deformation - 01 January 1994

STP24331S: Creep Buckling of Asymmetric Laminated Beam Columns - 01 January 1994

STP24332S: Effects of Layer Waviness on the Compression Response of Laminates - 01 January 1994

STP24333S: Effects of Layer Waviness on the Stresses and Failure in Hydrostatically Loaded Cylinders - 01 January 1994

STP24329S: Stability Analysis of Thick-Section Composite Cylinders Under Hydrostatic Pressure Including Three-Dimensional Effects and Nonlinear Material Response - 01 January 1994

STP12778S: Monotonic and Cyclic Rupture of a Silicon Nitride Ceramic - 01 January 1994

STP1201-EB: Life Prediction Methodologies and Data for Ceramic Materials - 01 January 1994

STP12779S: Mechanical Properties and NDE of a HIP'ed Silicon Nitride - 01 January 1994

STP12780S: The Numerical Evaluation of Failure Theories for Brittle Materials - 01 January 1994

STP12781S: Lifetime Prediction for Ceramic Materials Under Constant and Cyclic Load - 01 January 1994

STP12782S: Probabilistic Failure Predictions in Ceramics and Ceramic Matrix Fiber Reinforced Composites - 01 January 1994

STP12783S: Application of Mixed-Mode Fracture Criteria for Weakest-Link Failure Prediction for Ceramic Materials - 01 January 1994

STP12773S: Elevated Temperature Behavior of Sintered Silicon Nitride Under Pure Tension, Creep, and Fatigue - 01 January 1994

STP12784S: A Methodology to Predict Creep Life for Advanced Ceramics Using Continuum Damage Mechanics - 01 January 1994

STP12785S: Time-Dependent Strength Degradation and Reliability of an Alumina Ceramic Subjected to Biaxial Flexure - 01 January 1994

STP12786S: Weibull Estimators for Pooled Fracture Data - 01 January 1994

STP12787S: The Multiaxial Equivalent of Stressed Volume - 01 January 1994

STP12788S: Determination of Defect Distributions for Use in Failure Theories of Load Bearing Ceramics - 01 January 1994

STP12789S: Probabilistic Methods for Ceramic Component Design and Implications for Standards - 01 January 1994

STP12790S: Lifitime Prediction for Ceramic Tubular Components - 01 January 1994

STP12791S: Evaluation of Tests for Measuring the Strength of Ceramic Tubes - 01 January 1994

STP12792S: Effect of Proof Testing on the Failure Probability of Multiaxially Loaded Ceramic Components - 01 January 1994

STP12793S: Predicting Creep Behavior of Silicon Nitride Components Using Finite Element Techniques - 01 January 1994

STP12774S: Fracture Mechanism Maps: Their Applicability to Silicon Nitride - 01 January 1994

STP12795S: Time-Dependent Reliability Analysis of Monolithic Ceramic Components Using the Cares/Life Integrated Design Program - 01 January 1994

STP12772S: Silicon Nitride Tensile Strength Database from Ceramic Technology Program PRocessing for Reliability Project - 01 January 1994

STP12775S: A Comparative Study of Existing and Newly Proposed Models for Creep Deformation and Life Prediction of Si3N4 - 01 January 1994

STP12776S: Creep Behavior of Silicon Nitride Determined From Curvature and Neutral Axis Shift Measurements in Flexure Tests - 01 January 1994

STP12777S: Comparison of Tension and Flexure to Determine Fatigue Life Prediction Parameters at Elevated Temperatures - 01 January 1994

STP1202-EB: Accelerated and Outdoor Durability Testing of Organic Materials - 01 January 1994

STP18178S: A review of Recent Developments in the Use of ASTM Standard Practice G 90 for the Testing of Nonmetallic Materials - 01 January 1994

STP13725S: Crack-Face Interaction: Protrusion Interference in Brittle Materials - 01 January 1994

STP13736S: The Application of a Ductile Fracture Method to Polymer Materials - 01 January 1994

STP13739S: Impact Testing of Al2O3 and SiCw/Al2O3 Ceramics - 01 January 1994

STP13238S: Surface Science Spectra: Practical Aspects of Applying Transformation Modeling to Analytical Data - 01 January 1994

STP13239S: Considerations in the Maintenance and Dissemination of the Powder Diffraction File Database - 01 January 1994

STP13240S: An Information Architecture for Composites Design and the Role of Knowledge-Based Systems and Product Data Exchange Standards - 01 January 1994

STP13241S: The Use of SGML for Retrieval of Chemical Data - 01 January 1994

STP13242S: Visual Presentation of Numerical and Scientific Data in Printed Publications - 01 January 1994

STP13231S: Proposed Preferred Method for Displaying Three- Dimensional Structure Information of Matter/Molecules - 01 January 1994

STP13232S: Object Data Models for Shared Molecular Structures - 01 January 1994

STP13230S: OCR of Chemical Structure Diagrams - 01 January 1994

STP13233S: Babel — A Tool for Converting Between Molecular Structural Data Formats - 01 January 1994

STP13234S: NetCDF — A Defacto, Standardized Framework for Analytical Data Exchange, Storage, and Archival - 01 January 1994

STP13235S: Evolution of an Interchange Specification for Mass Spectrometric Data - 01 January 1994

STP13236S: The Demand for and the Value of a Standard, Unified Data Architecture for Analytical Testing Data - 01 January 1994

STP13237S: Future ADISS Data Architecture for Materials, Properties and Analytical Testing - 01 January 1994

STP12919S: Joint Design : Finite Element Aided Design of Adhesive Joints - 01 January 1994

STP1227-EB: Composites Bonding - 01 January 1994

STP12912S: Correlating the Dynamic Rheological Properties of Adhesives and Substrates to Explain Bond Strengths - 01 January 1994

STP12911S: Surface Pretreatment and Adhesive Bonding of Carbon Fiber-Reinforced Epoxy Composites - 01 January 1994

STP12913S: Repair of Thermoplastic Resin Composites by Fusion Bonding - 01 January 1994

STP12914S: Predicting the Strength of Bonded Carbon Fibre/Epoxy Composite Joints - 01 January 1994

STP12915S: Predicting Performance of Adhesively Bonded Joints Based on Acousto-Ultrasonic Evaluation - 01 January 1994

STP12916S: The Durability of Adhesive Bonded Epoxy Carbon Fibre Composite - 01 January 1994

STP12917S: The Effect of Temperature and Humidity on the Fatigue Behaviour of Composite Bonded Joints - 01 January 1994

STP12918S: Fractographic Analysis of Surface Preparations on Graphite/Epoxy Composites Used in Adhesive Bonding - 01 January 1994

STP13944S: Computer-Aided Laser Interferometry for Fracture Testing - 01 January 1994

STP12937S: Corrosion Resistance of Several Conductive Caulks and Sealants from Marine Field Tests and Laboratory Studies with Marine, Mixed Communities Containing Sulfate-Reducing Bacteria (SRB) - 01 January 1994

STP15368S: Assignment of the Glass Transition Temperature Using Dielectric Analysis: A Review - 01 January 1994

STP1249-EB: Assignment of the Glass Transition - 01 January 1994

STP15369S: Calorimetric Studies on Glasses and Glass Transition Phenomena - 01 January 1994

STP15370S: Analysis of DSC Thermal Curves for Assigning a Characteristic Glass Transition Temperature, Dependent on Either the Type or Thermal History of the Polymer - 01 January 1994

STP15371S: Sensing Glass Transitions in Thin Polymer Films on Acoustic Wave Microsensors - 01 January 1994

STP15372S: Plasticization of Polystyrene by High Pressure Gases: A Calorimetric Study - 01 January 1994

STP15373S: Glass Transition in Polymers: Comparison of Results from DSC, TMA, and TOA Measurements - 01 January 1994

STP15363S: The Nature of the Glass Transition and its Determination by Thermal Analysis - 01 January 1994

STP15374S: Glass Transition and Heat Capacities of Inorganic Glasses: Diminishing Change in the Heat Capacity at Tg for xNa2S + (1 − x)B2S3 Glasses - 01 January 1994

STP15375S: Glass Transition of a Liquid Crystal Polymer - 01 January 1994

STP15376S: Glass Transition(s) of Ionomers - 01 January 1994

STP15377S: Measurement of the Glass Transition Temperature of Elastomer Systems - 01 January 1994

STP15378S: Assigning the Glass Transition Temperature in Oriented Poly(ethylene terephthalate) - 01 January 1994

STP15379S: The Glass Transition Temperature of Glassy Polymers Using Dynamic Mechanical Analysis - 01 January 1994

STP15380S: Measuring the Glass Transition Temperature of EPDM Roofing Materials: Comparison of DMA, TMA, and DSC Techniques - 01 January 1994

STP15381S: Evaluation of Upper Use Temperature of Toughened Epoxy Composites - 01 January 1994

STP15382S: Glass Transition Measurements on Automotive Coatings by DSC, DMA, and TMA - 01 January 1994

STP15364S: Phenomenology of the Structural Relaxation Process and the Glass Transition - 01 January 1994

STP15365S: Glass Transition Measurements by DSC - 01 January 1994

STP15366S: Assignment of Glass Transition Temperatures Using Thermomechanical Analysis - 01 January 1994

STP15367S: The Application of Dynamic Mechanical Methods to Tg Determination in Polymers: An Overview - 01 January 1994

STP13997S: The Relation Between Rheology, Artificial Weathering, and Urethane Sealant Performance - 01 January 1994

STP13998S: Further Studies of Cure and Durability of Building Sealants - 01 January 1994

STP13999S: Case Histories of Successfully Sealed Expansion Joints with Polysulfide Sealants - 01 January 1994

STP14000S: Expansion Joints in Deck Waterproofing Systems - 01 January 1994

STP13996S: Advances in Test Methods to Assess the Long-Term Performance of Sealants - 01 January 1994

STP14001S: Sealant Selection Using an Expert System - 01 January 1994

STP14002S: Test Method for Evaluating Pavement Sealants Under Simultaneous Cyclic Shear and Normal Deflections - 01 January 1994

STP14003S: Methods of Predicting the Adhesion of Silicone Sealants to Anodized Aluminum - 01 January 1994

STP18105S: Fiber-Reinforced Polymer Composite Biomaterials: Characterization of Interfacial Bond Strength and Environmental Sensitivity - 01 January 1994

STP18106S: The Use of Small-Scale Flexure Test Specimens to Evaluate the Mechanical Properties of Polymer Composites for Biomaterials Applications - 01 January 1994

STP18107S: A Numerical Time-Frequency Transform Technique for the Determination of the Complex Modulus of Composite and Polymeric Biomaterials from Transient Time-Based Experiments - 01 January 1994

STP18108S: Fracture Behavior of Polyurethane-Calcium Chloride Blends - 01 January 1994

STP18109S: Micromechanical Testing of Interfacial Bonding in Absorbable Composites - 01 January 1994

STP18093S: The Relationship Between PTFE Graft Ultrastructure and Cellular Ingrowth: The Influence of an Autologous Jugular Vein Wrap - 01 January 1994

STP18090S: Fatigue Properties of Segmented Polyether Polyurethanes for Cardiovascular Applications - 01 January 1994

STP24000S: Measurement of Electrical Conductivity of Ceramic Insulators in a Fission Reactor - 01 January 1994

STP24001S: Radiation Induced Mechanical Stresses in Polycrystalline Alumina Insulators - 01 January 1994

STP24002S: High-Temperature Irradiation of Alumina-Base Ceramic Materials in a Water Cooled Fission Reactor - 01 January 1994

STP24003S: The Effect of Neutron Irradiation on the Structure and Properties of Carbon-Carbon Composite Materials - 01 January 1994

STP24004S: Irradiation Behavior of Carbon-Boron-Titanium Materials - 01 January 1994

STP24006S: Effect of Neutron Irradiation on Thermal Conductivity of Carbon/Carbon Fiber Materials at 400 and 600°C in the Fluence Range 1 × 1022 to 1 × 1024 m-2 - 01 January 1994

STP18128S: Effect of Axial Force and Bending Moment Interaction on the Response of Elastoplastic Concrete Frames to Cyclic Loading - 01 January 1994

STP24342S: Compression Response of a Fatigue-Loaded Composite Hip Prosthesis - 01 January 1994

STP24334S: Design, Analysis, and Hydrotesting of a Composite-Aluminum Cylinder Joint for Pressure-Hull Applications - 01 January 1994

STP24876S: Corrosion Prediction from Accelerated Tests in the Chemical Process Industries - 01 January 1994

STP25187S: Changes in Characteristics Arising from Processing and the Effect on In Vitro Stability of Calcium Phosphate Ceramics - 01 January 1994

STP1196-EB: Characterization and Performance of Calcium Phosphate Coatings for Implants - 01 January 1994

STP25188S: Structural Changes of Plasma Sprayed Hydroxyapatite Coatings During In-Vitro Testing - 01 January 1994

STP25189S: The Effect of Calcium Phosphate Ceramic Composition and Structure on In Vitro Precipitation Reactions - 01 January 1994

STP25190S: Hydroxylapatite-Coatings for Non-Precision Implant Placements - 01 January 1994

STP25191S: Dense Hydroxylapatite (HA) and Microporous HA Resorption - 01 January 1994

STP25179S: Techniques for the Characterization and Quality Control of Hydroxyapatite Raw Materials and Coatings - 01 January 1994

STP25192S: Calcium Phosphate Precipitation on Calcium-Ion-Implanted Titanium in Electrolyte - 01 January 1994

STP25193S: Calcium Phosphate (Ca-P) Coating Draft Guidance for Preparation of Food and Drug Administration (FDA) Submissions for Orthopedic and Dental Endosseous Implants - 01 January 1994

STP25194S: Development of ASTM Standards for Bioceramics - 01 January 1994

STP25177S: Early History of Calcium Phosphate Materials and Coatings - 01 January 1994

STP25180S: A Calibrated Method for Crystallinity Determination of Hydroxylapatite Coatings - 01 January 1994

STP25181S: X-Ray Diffraction Method for the Quantitative Characterization of Calcium Phosphate Coatings - 01 January 1994

STP25182S: Variations in Composition and Crystallinity of ‘Hydroxyapatite (HA)’ Preparations - 01 January 1994

STP25183S: Nondestructive Characterization of Hydroxylapatite Coated Dental Implants by XRD Method - 01 January 1994

STP25184S: X-Ray Diffraction Characterization of Percent Crystallinity and Contaminants in Plasma-Sprayed Hydroxylapatite Coatings - 01 January 1994

STP25185S: Characterization of Composite Hydroxylapatite (HA) Coatings for Medical and Dental Devices - 01 January 1994

STP25186S: Calcium Phosphate Type Reference Material: Development, Preparation and Characterization - 01 January 1994

STP25178S: Hydroxylapatite Powders for Implant Coatings - 01 January 1994

STP1214-EB: Computerized Chemical Data Standards: Databases, Data Interchange, and Information Systems - 01 January 1994

STP1254-EB: Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: 3rd Volume - 01 January 1994

STP24727S: Damage Prediction in Cross-Plied Curved Composite Laminates - 01 January 1993

STP1156-EB: Composite Materials: Fatigue and Fracture, Fourth Volume - 01 January 1993

STP24728S: Evaluation of Impact Damage in Composite Materials Using Acoustic Emission - 01 January 1993

STP24729S: The Change in Thermal Expansion Coefficient as a Damage Parameter During Thermal Cycling of Crossply Laminates - 01 January 1993

STP24730S: Tensile Deformation of SiC/Ti-15-3 Laminates - 01 January 1993

STP24731S: Material Modeling for Unidirectional Glass and Glass-Ceramic Matrix Composites with Progressive Matrix Damage - 01 January 1993

STP24732S: Modeling Ply Crack Growth in Laminates Under Combined Stress States - 01 January 1993

STP24733S: Assessment of Interlayer Shear Slip Theory for Delamination Modeling - 01 January 1993

STP24734S: Effect of Initial Delamination on Mode I and Mode II Interlaminar Fracture Toughness and Fatigue Fracture Threshold - 01 January 1993

STP24735S: Damage and Failure Mechanisms in Scaled Angle-Ply Laminates - 01 January 1993

STP24736S: Thickness Effect of Double Cantilever Beam Specimen on Interlaminar Fracture Toughness of AS4/PEEK and T800/Epoxy Laminates - 01 January 1993

STP24737S: The Influence of Interleaf Deformation Behavior and Film-Resin Adhesion on the Fracture Toughness of Interleaved Composites - 01 January 1993

STP24738S: Effects of Water and Jet Fuel Absorption on Mode I and Mode II Delamination of Graphite/Epoxy - 01 January 1993

STP24739S: Interlaminar Fracture Analysis of Unsymmetrical Laminates - 01 January 1993

STP24723S: Failure Initiation and Ultimate Strength of Composite Laminates Containing a Center Hole - 01 January 1993

STP24740S: Some Observations on the Analysis of In-Plane Matrix Failures in Fibrous Composite Laminates - 01 January 1993

STP24741S: Model Composites: A Novel Approach for the Evaluation of Micromechanical Behavior - 01 January 1993

STP24742S: Meso-lndentation Testing of Composite Materials as a Tool for Measuring Interfacial Quality - 01 January 1993

STP24743S: Evaluating Surface Treatment Effects on Interfacial Bond Strength Using Dynamic Mechanical Analysis - 01 January 1993

STP24744S: Micromechanical Analysis of Fiber Fracture - 01 January 1993

STP24745S: Micromechanics of Tensile Strength in Composite Systems - 01 January 1993

STP24746S: Fatigue Damage in Thick, Cross-Ply Laminates with a Center Hole - 01 January 1993

STP24747S: Local Delamination in Laminates with Angle Ply Matrix Cracks, Part I: Tension Tests and Stress Analysis - 01 January 1993

STP24748S: Local Delamination in Laminates with Angle Ply Matrix Cracks, Part II: Delamlnation Fracture Analysis and Fatigue Characterization - 01 January 1993

STP24749S: Effects of Stress Ratio on Edge Delamination Characteristics in Laminated Composites - 01 January 1993

STP24750S: Effect of Interleaves on the Damage Mechanisms and Residual Strength of Notched Composite Laminates Subjected to Axial Fatigue Loading - 01 January 1993

STP24724S: Response of Notched Graphite/Epoxy and Graphite/PEEK Systems - 01 January 1993

STP24751S: Characterization of Composite Material's Dynamic Response Using Load/Stroke Frequency Response Measurement - 01 January 1993

STP24752S: Analysis of Thermomechanical Fatigue of Unidirectional Titanium Metal Matrix Composites - 01 January 1993

STP24722S: Failure of Graphite/Epoxy Panels with Stiffening Strips - 01 January 1993

STP24753S: High-Temperature Tension-Compression Fatigue Behavior of a Unidirectional Tungsten Copper Composite - 01 January 1993

STP24754S: Monitoring Fatigue Damage Development in Ceramic Matrix Composite Tubular Specimens by a Thermoelastic Technique - 01 January 1993

STP24755S: High-Cycle Fatigue Crack Growth Properties of Aramid-Reinforced Aluminum Laminates - 01 January 1993

STP24725S: Failure Analysis of Notched Unidirectional Graphite/Epoxy Tubes Under Combined Loading - 01 January 1993

STP24726S: Matrix Cracking-Induced Delamination Propagation in Graphite/Epoxy Laminated Composites Due to a Transverse Concentrated Load - 01 January 1993

STP25101S: Microstructural Studies of an Oxide-Dispersion-Stabilized Niobium Composite Using Transmission Electron Microscopy - 01 January 1993

STP18052S: The Effect of the Interphase/Interface Region on Creep and Creep Rupture of Thermoplastic Composites - 01 January 1993

STP1174-EB: High Temperature and Environmental Effects on Polymeric Composites - 01 January 1993

STP18053S: Determination of a Load, Heat, Time-to-Failure Surface of Polymeric Composites - 01 January 1993

STP18054S: Property Improvements of Polymer Composites After Loading at High Temperatures - 01 January 1993

STP18055S: The Effects of Physical Aging on the Creep Response of a Thermoplastic Composite - 01 January 1993

STP18056S: The Effects of Moisture Sorption on the Creep Behavior of Fibers - 01 January 1993

STP18057S: Effects of Elevated Temperature on the Viscoplastic Modeling of Graphite/Polymeric Composites - 01 January 1993

STP18047S: Mode I Delamination of Carbon Fiber Reinforced Thermoplastic Polymer Under Static and Cyclic Creep at Elevated Temperatures - 01 January 1993

STP18048S: Delamination Onset in Polymeric Composite Laminates Under Thermal and Mechanical Loads - 01 January 1993

STP18049S: High-Temperature Behaviors of an Innovative Polymeric Matrix Composite - 01 January 1993

STP18046S: Measurement of Stress Corrosion Crack Growth in Sheet Molding Compounds - 01 January 1993

STP18050S: The Effect of a Seawater Environment on the Galvanic Corrosion Behavior of Graphite/Epoxy Composites Coupled to Metals - 01 January 1993

STP18051S: The Simulation and Detection of Electrochemical Damage in BMI/Graphite Fiber Composites Using Electrochemical Impedance Spectroscopy - 01 January 1993

STP15547S: Stability of Polysulfone Composite Materials in a Lipid Environment - 01 January 1993

STP15548S: Characterization and Optimization of Small Particle Dental Composites - 01 January 1993

STP15549S: A Mechanical and Histological Analysis of the Bonding of Bone to Hydroxylapatite/Polymer Composite Coatings - 01 January 1993

STP15540S: Environmental Effect on a Thermoplastic Elastomer (TPE) for Use in a Composite Intervertebral Disc Spacer - 01 January 1993

STP15541S: Fatigue Testing of Femoral Hip Prostheses with a Two-Beam Simulated Femoral Bone Support Fixture - 01 January 1993

STP15542S: In Vitro Studies on the Electrochemical Behavior of Carbon-Fiber Composites - 01 January 1993

STP15539S: Comparative Study of Carbon Polymer Composite and Titanium Femoral Stems in Dogs Using Computed Tomography - 01 January 1993

STP15543S: The Effect of Interfacial Bonding Upon Compressive Strength and Fracture Energy of Carbon Fiber Reinforced Polymer (CFRP) Composite: A Theoretical Investigation - 01 January 1993

STP15544S: A Life Prediction Model for Fatigue Loaded Composite Femoral Prosthesis - 01 January 1993

STP15545S: Creep Testing of a Composite Material Human Hip Prosthesis - 01 January 1993

STP15546S: Intraoperative Impact: Characterization and Laboratory Simulation on Composite Hip prostheses - 01 January 1993

STP15956S: Cleaning Aluminum Heat Pipe Casings with Replacements for Ozone-Depleting Chemicals - 01 January 1993

STP15957S: “Witness Coupon” Testing as a Possible Method for Validating Precision Cleaned Hardware in Oxygen Systems - 01 January 1993

STP15948S: A Comparison of NonCFC and CFC Methods for Removal of Organic and Particulate Contaminant on Stainless Steel Components - 01 January 1993

STP15959S: A Selection and Evaluation Protocol for Alternatives to Halogenated Hydrocarbon Solvents for Oxygen Cleaning Applications - 01 January 1993

STP15947S: Experience and Initiatives in Replacing Ozone Depleting Chemicals for Precision Cleaning at the U.S. Air Force's Aerospace Guidance and Metrology Center - 01 January 1993

STP15949S: Evaluation of Isopropyl Alcohol as an Alternative Solvent for Chlorofluorocarbons in the Cleanliness Verification of Aerospace Hardware and Ground Support Equipment - 01 January 1993

STP15950S: Evaluation of the Differences in Performing Particle Analysis with Water Instead of CFC Fluids - 01 January 1993

STP15951S: Aqueous Nonvolatile Residue Validation of Precision Cleaned Hardware - 01 January 1993

STP15952S: Aqueous Cleaning of Industrial and High-Purity Valves and Fittings: Process Development, Control, and Validation - 01 January 1993

STP15953S: Methods for Using Water Impingement in Lieu of Chlorofluorocarbon 113 for Determining the Non-Volatile Residue Level on Precision Cleaned Hardware - 01 January 1993

STP15954S: An Aqueous Fine Clean Process for Rocket Engine Hardware - 01 January 1993

STP15955S: A Demonstrated Detergent Cleaning Technique for Fluorinated Propellant Systems - 01 January 1993

STP24256S: Proposed Framework for Thermomechanical Fatigue (TMF) Life Prediction of Metal Matrix Composites (MMCs) - 01 January 1993

STP24249S: Analysis of Thermomechanical Cyclic behavior of Unidirectional Metal Matrix Composites - 01 January 1993

STP18084S: Study of Protection Mechanisms of Zinc-Rich Paints by Electrochemical Impedance Spectroscopy - 01 January 1993

STP24293S: Debonding Force of a Single Fiber from a Composite Body - 01 January 1993

STP24294S: A Finite-Element Analysis of Nonlinear Behavior of the End-Loaded Split Laminate Specimen - 01 January 1993

STP24295S: Investigating the Near-Tip Fracture Behavior and Damage Characteristics in a Particulate Composite Material - 01 January 1993

STP24296S: Modeling the Progressive Failure of Laminated Composites with Continuum Damage Mechanics - 01 January 1993

STP24297S: Effect of Fiber-Matrix Debonding on Notched Strength of Titanium Metal-Matrix Composites - 01 January 1993

STP24298S: Evolution of Notch-Tip Damage in Metal-Matrix Composites During Static Loading - 01 January 1993

STP24299S: Experimental Verification of a New Two-Parameter Fracture Model - 01 January 1993

STP24300S: Translaminate Fracture of Notched Graphite/Epoxy Laminates - 01 January 1993

STP24301S: Near-Tip Behavior of Particulate Composite Material Containing Cracks at Ambient and Elevated Temperatures - 01 January 1993

STP24302S: Static Fatigue in Dilatant-Zone-Toughened Ceramics - 01 January 1993

STP15962S: Friction Characteristics of Plastic Plain Bearings at Low Velocity - 01 January 1993

STP14902S: Fractographic Study of Notch Fatigue Crack Closure and Growth Rates - 01 January 1993

STP1203-EB: Fractography of Modern Engineering Materials: Composites and Metals, Second Volume - 01 January 1993

STP14903S: Effect of Oxidizing Environments on Long-Term Performance of Rotationally Molded XLPE Storage Tanks - 01 January 1993

STP14904S: Tensile and Tension-Tension Fatigue Fracture Behavior of γ-Al2O3/Al Metal Matrix Composite at Room and Elevated Temperature - 01 January 1993

STP14905S: Failure Analysis of Aramid Fiber Reinforced Aluminum Laminates with Surface and Through Thickness Fatigue Cracks - 01 January 1993

STP14906S: Fractographic Analysis of Quasi-Isotropic Laminates Loaded in Compression - 01 January 1993

STP14907S: Quantitative Fractography of the Cracked Lap Shear Composite Specimen - 01 January 1993

STP14898S: Computerization of Fracture Features and Failure Analysis of Automotive Composite Materials - 01 January 1993

STP14897S: Recent Developments in Quantitative Fractography - 01 January 1993

STP14899S: Statistical Analysis of Profilometric Sampling for Roughness Parameters - 01 January 1993

STP14900S: Quantitative Fracture Surface Analysis of Fatigue Crack Propagation Under Variable Amplitude Loading - 01 January 1993

STP14901S: Deep Space Network 70-Meter Antenna Elevation Bearing Failure Investigation - 01 January 1993

STP12622S: Evaluation of Compression Specimens and Fixtures for Testing Unidirectional Composite Laminates - 01 January 1993

STP1206-EB: Eleventh Volume: Composite Materials—Testing and Design - 01 January 1993

STP12623S: Measurement of Multiaxial Ply Strength by an Off-Axis Flexure Test - 01 January 1993

STP12624S: Biaxial Testing and Failure Mechanisms in Tubular G-10 Composite Laminates - 01 January 1993

STP12625S: Elastic Constants of Isotropic and Orthotropic Composite Materials from Plate Vibration Test Data - 01 January 1993

STP12626S: High Strain Rate Effects for Composite Materials - 01 January 1993

STP12627S: Matrix-Dominated Stress/Strain Behavior in Polymeric Composites: Effects of Hold Time, Nonlinearity, and Rate Dependency - 01 January 1993

STP12628S: Thermomechanical Fatigue Behavior of SiC/Ti-24Al-11Nb [0]8 in Air and Argon Environments - 01 January 1993

STP12629S: Micromechanical Analysis of Fiber-Matrix Interface Stresses Under Thermomechanical Loadings - 01 January 1993

STP12630S: Bearing Strength Behavior of Clearance-Fit Fastener Holes in Toughened Graphite/Epoxy Laminates - 01 January 1993

STP12631S: Experimental Determination of the Effect of Hole Interaction on Stress Concentrations in Angle Ply Graphite/Epoxy Composite Panels - 01 January 1993

STP12618S: Scale Effects on the Transverse Tensile Strength of Graphite/Epoxy Composites - 01 January 1993

STP12632S: Design and Testing of Composite Laminates for Optimum Extension-Twist Coupling - 01 January 1993

STP12633S: Modeling of the Thermo-Elastic Properties of Woven Fabric Composites in Complex Shapes - 01 January 1993

STP12634S: Analysis of Thick-Sectioned Composite Cylindrical Shells Under Hydrostatic Pressure - 01 January 1993

STP12635S: The Effect of Mixed-Mode Loading on Delamination Fracture Toughness - 01 January 1993

STP12636S: A Bilinear Failure Criterion for Mixed-Mode Delamination - 01 January 1993

STP12637S: Determination of Ply-Drop Configurations - 01 January 1993

STP12638S: An Interlaminar Tensile Strength Specimen - 01 January 1993

STP12619S: Inelastic Shear Response of Unidirectional Composites from Torsion of Solid Bars - 01 January 1993

STP12620S: Composite Material Shear Property Measurement Using the Iosipescu Specimen - 01 January 1993

STP12617S: Matrix-Dominated Mechanical Properties of a Fiber Composite Lamina - 01 January 1993

STP12621S: Compression of “Thick” Composites: Two Test Methods - 01 January 1993

STP15087S: Fatigue Lifetime Prediction of Angle-Plied Fiber-Reinforced Elastomer Composites as Pneumatic Tire Materials - 01 January 1993

STP15088S: Problems with Current Methodology in Using the Arrhenius Equation to Predict the Long-Term Behavior of Polymeric Materials in Geotechnical Environments - 01 January 1993

STP15073S: Use of Mechanistic Life Prediction Methods for the Design of Damage-Tolerant Composite Material Systems - 01 January 1993

STP15079S: A Creep Cavity Growth Model for Creep-Fatigue Life Prediction of a Unidirectional W/Cu Composite - 01 January 1993

STP20186S: Controlling Microbial Growth in Aqueous-Based Pesticide Formulations - 01 January 1993

STP1146-EB: Pesticide Formulations and Application Systems: Twelfth Volume - 01 January 1993

STP20187S: Colloidal Microcrystalline Cellulose as a Thickener in Flowables - 01 January 1993

STP20188S: Using Nonionic Surfactants in Aqueous Formulations - 01 January 1993

STP20189S: A Photometric Study of Dilute Microcapsule Suspensions - 01 January 1993

STP20190S: The Delivery of Agricultural Fungicides in Paucilamellar Amphiphile Vesicles - 01 January 1993

STP20191S: Cold Temperature Properties of Pesticides Dissolved in Aromatic Hydrocarbon Fluids - 01 January 1993

STP20192S: An Unexpected Interaction Between Inerts Used in Solvent Based Formulations - 01 January 1993

STP20193S: Characterizing the Fire Safety of Liquid Pesticide Formulations by Using ASTM D56 Tag Closed Cup Flash Point Method - 01 January 1993

STP20194S: Developing Formulations with Robotics - 01 January 1993

STP20195S: Use of Deactivators in Granular Clay Formulations - 01 January 1993

STP20196S: Culigel® Controlled-Release and Pest-Management Systems - 01 January 1993

STP20180S: Alkyl Polyglycosides: Versatile, Biodegradable Surfactants for the Agricultural Industry - 01 January 1993

STP20197S: Container Design and ‘Glug’ - 01 January 1993

STP20198S: Some Practical Limitations of Fluorescent Tracers Used to Measure Off-Target Pesticide Deposition. - 01 January 1993

STP20199S: Atomization and Application of Biopesticide Formulations - 01 January 1993

STP20200S: Permethrin Deposition and Persistence in Canopy Foliage of a Plantation Forest - 01 January 1993

STP20201S: Aerial Spray Deposits of Bacillus Thuringiensis in Experimental Trials Over Hardwood Forests - 01 January 1993

STP20202S: The Benefits of an Anti-Evaporant in Pesticide Applications - 01 January 1993

STP20203S: Ovicide Formulation and Aerial Application Parameters Influence Control of Tobacco Budworm on Cotton - 01 January 1993

STP20181S: Sucroglycerides: Novel Biodegradable Surfactants for Plant Protection Formulations - 01 January 1993

STP20204S: The Influence of Paraffinic Oil and Nonionic Surfactant on the Foliar Activity of an Aryloxyphenoxypropionate Herbicide - 01 January 1993

STP20205S: Adjuvants to Reduce Drift from Handgun Spray Applications - 01 January 1993

STP20179S: Novel Adjuvants for Agrochemical Formulations Based on Sugar Ethers - 01 January 1993

STP20182S: Physical Properties of Silicone Surfactants for Agrochemical Applications - 01 January 1993

STP20183S: Preparation and Evaluation of Concentrated Emulsions of Agrichemicals - 01 January 1993

STP20184S: Microemulsions of Pyrethroids : Phase Diagrams and Effectiveness of Tristyrylphenol Based Surfactants - 01 January 1993

STP20185S: N-Alkyl Pyrrolidone Requirement for Stable Water-Based Microemulsions - 01 January 1993

STP23876S: Determination of Lead and Cadmium in Soils, Sludges, and Fertilizers by an Ion- Exchange/Spectrophotometric Method - 01 January 1993

STP23873S: Factors Affecting the Soil Extraction and Preconcentration by C18 Solid-Phase Enrichment of Alachlor, Atrazine, and Atrazine Dealkylation Products - 01 January 1993

STP23874S: Development of a Solid-Phase Extraction Method for Herbicide Residue Analysis of Soil Samples - 01 January 1993

STP18014S: Standardization of Terminology for Recycling and Degradation of Plastics - 01 January 1993

STP1178-EB: Composite Materials for Implant Applications in the Human Body: Characterization and Testing - 01 January 1993

STP19238S: Interaction Assessment III: Predicting Population-level Impacts of Toxicants and Pesticides - 01 January 1993

STP19254S: Quality Control in Aquatic Toxicity Testing Programs: Evaluation of Copper and Hexavalent Chromium As Reference Toxicants - 01 January 1993

STP1181-EB: Alternatives to Chlorofluorocarbon Fluids in the Cleaning of Oxygen and Aerospace Systems and Components - 01 January 1993

STP25127S: Effect of Polyethylene Glycol on the Adsorption of Polymeric Surface Active Agent and the Stability of Concentrated Suspensions - 01 January 1993

STP1183-EB: Pesticide Formulations and Application Systems: 13th Volume - 01 January 1993

STP25128S: Pesticide Microemulsion Concentrate Formulations Utilizing Fatty Acid Methyl Esters as Solvent Alternatives - 01 January 1993

STP25129S: Effects of Solvents on Polymeric and Elastomeric Materials in Agricultural Chemical Systems - 01 January 1993

STP25130S: Formulation Test Methods and Statistical Experimental Design - 01 January 1993

STP25121S: Influence of Two Adjuvants on Rain-Washing Characteristics of Glyphosate Deposits from Trembling Aspen Foliage, Following a Field Spray Application - 01 January 1993

STP25131S: Effect of Surfactant Type and Order of Addition on Droplet Size and Dynamic Interfacial Properties - 01 January 1993

STP25132S: Effect of Drift Retardant Chemicals on Spray Drift, Droplet Size and Spray Pattern - 01 January 1993

STP25133S: Physico-Chemical Properties, In-Flight Evaporation and Spread of Spray Droplets Containing Pesticide Adjuvants - 01 January 1993

STP25134S: The Effect of Diluent Oils on the Electrostatic Atomization of Some Insecticides - 01 January 1993

STP25135S: Degradation of Fluorescent Tracer Dyes Used in Spray Applications - 01 January 1993

STP25136S: Rain-Fastness of Bacillus Thuringiensis Deposits on Conifer Foliage - 01 January 1993

STP25137S: A Simulation Model of the Dose Transfer of Foliar Applied Insecticides - 01 January 1993

STP25138S: Droplet Size Spectra of Dipel™ Sprayed Through Different Atomizers - 01 January 1993

STP25139S: Measurement of Spray Distribution Uniformity for Agricultural Nozzles Using Spectral Analysis - 01 January 1993

STP25140S: Development of Process Control Charts ( and R) for Evaluating Performance of 8004 Fan Nozzles - 01 January 1993

STP25141S: Continuous Process for Starch Encapsulated Herbicides - 01 January 1993

STP25142S: Efficacy of Polymeric Controlled Release Formulations of Sulprofos Against Tobacco Budworm, Heliothis virescens (Lepidoptera: Noctuidae) on Cotton - 01 January 1993

STP25122S: Pyrethroid Microemulsions - 01 January 1993

STP25143S: Comparative Performance of Culigel® Superabsorbent Polymer-Based Pesticide Formulations - 01 January 1993

STP25144S: Use of Intelimer® Microcapsules to Control the Release of Agricultural Products and Reduce Leaching - 01 January 1993

STP25145S: A Screening Test for Water Dispersible Granules Produced by Spray Drying - 01 January 1993

STP25146S: New Manufacturing Processes for Making WDG Pesticides - 01 January 1993

STP25147S: Recent Advances in Water Dispersible Granule Formulation Technologies Dealing with Non-Traditional Technicals - 01 January 1993

STP25148S: Measurement of Dynamic Granule Dispersibility Using Particle Size Analysis - 01 January 1993

STP25120S: Surfynol Surfactants as Defoamers for Glyphosate Formulations with Alkyl Glycoside Surfactants - 01 January 1993

STP25149S: Grafted Polymers and Copolymers of Vinyl Pyrrolidone for Improved Water Dispersible Granules - 01 January 1993

STP1183-EB: Pesticide Formulations and Application Systems: Thirteenth Volume - 01 January 1993

STP25123S: Use of Pregelatinized Starch and Other Polysaccharides for Improved Storage and Efficacy of Biocontrol Agents - 01 January 1993

STP25124S: The Reduction of Herbicide Leaching Using Vinyl Pyrrolidone Copolymers and Methyl Vinyl Ether Maleic Acid Ester Copolymers - 01 January 1993

STP25125S: Processed Guar Gum in Agricultural Applications: New Interest for an Old “Inert” - 01 January 1993

STP25126S: The Relation of the Pourability of Suspension Concentrates to their Viscoelasticity - 01 January 1993

STP1192-EB: Engine Coolant Testing: Third Volume - 01 January 1993

STP25154S: Corrosion Protection of Aluminum Heat-Transfer Surfaces in Engine Coolants Using Monoacid/Diacid Inhibitor Technology - 01 January 1993

STP25161S: Phosphate-Molybdate Supplement Coolant Additives for Heavy Duty Diesel Engines - 01 January 1993

STP25162S: Toxicity and Disposal of Engine Coolants - 01 January 1993

STP25163S: Test Strips for Rapid On-Site Analysis of Engine Coolants - 01 January 1993

STP25165S: Application of Inductively Coupled Plasma (ICP) Emission Spectroscopy and Laser Ablation-ICP for Problem Solving in Coolant Systems - 01 January 1993

STP25166S: The Chemistry of Oxalic Acid Cleaning of Engine Cooling Systems - 01 January 1993

STP25167S: Investigation of Deposits on Water Pump Seal Faces - 01 January 1993

STP25168S: The Relationship between Sealing Performance of Mechanical Seals and Composition of Coolants for Automotive Engines - 01 January 1993

STP25169S: Characterization of Used Engine Coolant by Statistical Analysis - 01 January 1993

STP25171S: Coolant Maintenance and Extension of Coolant Life for Light Duty Vehicles - 01 January 1993

STP25172S: A Multi-stage Process for Used Antifreeze/Coolant Purification - 01 January 1993

STP25155S: Fleet Test Correlations of Original Equipment Coolant Pump Failures and Engine Coolant Formulations - 01 January 1993

STP25173S: An Evaluation of Engine Coolant Recycling Processes: Part I - 01 January 1993

STP25174S: Heavy Duty Diesel Engine Coolants: Technology Update - 01 January 1993

STP25156S: An Investigation of Carboxylic Acids as Corrosion Inhibitors in Engine Coolant - 01 January 1993

STP25157S: Fleet Test Evaluation of Engine Coolants Using Sebacic Acid Inhibitor Technology - 01 January 1993

STP25153S: A Review of Automotive Engine Coolant Technology - 01 January 1993

STP24862S: Combustion Characteristics of Polymers as Ignition Promoters - 01 January 1993

STP24863S: Evaluation of Buna N Ignition Hazard in Gaseous Oxygen - 01 January 1993

STP24866S: The Behaviour of Oil Films on Structured Packing Under Cryogenic Conditions - 01 January 1993

STP24850S: Effects of Diluents on Flammability of Nonmetals in High-Pressure Oxygen Mixtures - 01 January 1993

STP24851S: Effect of Hydrocarbon Oil Contamination on the Ignition and Combustion Properties of PTFE Tape in Oxygen - 01 January 1993

STP17850S: Practical Applications of Gas Chromatography in the Paint and Coatings Industry - 01 January 1992

STP1119-EB: Analysis of Paints and Related Materials: Current Techniques for Solving Coatings Problems - 01 January 1992

STP17851S: Applications of FTIR to Paint Analysis - 01 January 1992

STP17852S: Chemical Characterization of Cross-Linked Polyurethane Films - 01 January 1992

STP17853S: Principles and Applications of Photoelectron and Ion Spectroscopy for the Analysis of Polymer Surfaces - 01 January 1992

STP17855S: Failure Analysis of Applied Coatings - 01 January 1992

STP17846S: Mass Spectrometric Techniques for Coatings Characterization - 01 January 1992

STP17845S: Modern Analytical Techniques for Coating and Coating Materials - 01 January 1992

STP17847S: HPLC Analysis for Epoxy Coatings Resins - 01 January 1992

STP17848S: Application of Size Exclusion Chromatography to Polymers and Coatings - 01 January 1992

STP17849S: X-Ray Techniques for Coatings Analysis - 01 January 1992

STP20148S: The Effect of Tab Orientation on the Distribution of Strains in Composite Specimens - 01 January 1992

STP1120-EB: Composite Materials: Testing and Design (Tenth Volume) - 01 January 1992

STP20151S: Hot/Wet Testing of Celion 3000/PMR-15 Coupon Specimens - 01 January 1992

STP20152S: A Scientific Approach to Composite Laminate Strength Prediction - 01 January 1992

STP20154S: Characterization of Unnotched SCS-6/Ti-15-3 Metal Matrix Composites at 650°C - 01 January 1992

STP20155S: High-Temperature Fatigue Behavior of a SIC/Ti-24Al-11 Nb Composite - 01 January 1992

STP20156S: Deformation and Failure of Longitudinally Loaded Brittle-Matrix Composites - 01 January 1992

STP20142S: The Influence of Fiber Waviness on the Compressive Behavior of Unidirectional Continuous Fiber Composites - 01 January 1992

STP20157S: A Macro—Micromechanics Analysis of a Notched Metal Matrix Composite - 01 January 1992

STP20159S: Analysis and Test Techniques for Composite Structures Subjected to Out-of-Plane Loads - 01 January 1992

STP20160S: Analysis and Testing of a Composite Sandwich Shell Horizontal Tail - 01 January 1992

STP20162S: Temperature and Load Cycling of a Thick Polyimide Quartz Laminate - 01 January 1992

STP20164S: Effects of Processing Variables on the Quality of Co-cured Sandwich Panels - 01 January 1992

STP20166S: Analysis of Composite Material Containing Defects - 01 January 1992

STP20167S: Image Enhancement Techniques for Ultrasonic NDE Applications - 01 January 1992

STP20169S: Free-Edge Stress Analysis of Glass-Epoxy Laminates with Matrix Cracks - 01 January 1992

STP20170S: Delamination Failure in a Unidirectional Curved Composite Laminate - 01 January 1992

STP20143S: Open Hole and Postimpact Compressive Fatigue of Stitched and Unstitched Carbon-Epoxy Composites - 01 January 1992

STP20171S: Efficient Use of Film Adhesive Interlayers to Suppress Delamination - 01 January 1992

STP20173S: Damage Tolerance of Three-Dimensional Commingled PEEK/Carbon Composites - 01 January 1992

STP20174S: Damage Accumulation and Fracture of Notched Composite Laminates Under Tensile and Compressive Loading - 01 January 1992

STP20175S: Advances in Thermographic Stress Analysis and Evaluation of Damage in Composites - 01 January 1992

STP20176S: Stress Field Sensitivity of a Composite Patch Repair as a Result of Varying Patch Thickness - 01 January 1992

STP20144S: A Method for Evaluating the High Strain Rate Compressive Properties of Composite Materials - 01 January 1992

STP20146S: Thermomechanical Testing of High-Temperature Composites: Thermomechanical Fatigue (TMF) Behavior of SiC(SCS-6)/Ti-15-3 - 01 January 1992

STP20140S: Reflections on the Development of Test Methods for Advanced Composites - 01 January 1992

STP20147S: In-Plane Biaxial Compressive Deformation and Failure of E-Glass/Epoxy Laminates - 01 January 1992

STP24167S: Damage Evaluation in Composite Materials Using Thermographic Stress Analysis - 01 January 1992

STP14569S: Dynamic Mechanical Analysis as a Complementary Damage Characterization Technique for Composite Materials - 01 January 1992

STP1128-EB: Damage Detection in Composite Materials - 01 January 1992

STP14570S: Damage Characterization for a Solid Propellant by an Energetic Approach - 01 January 1992

STP14571S: Effect of Manufacture-Induced Flaws on the Strength of Foam Core Sandwich Beams - 01 January 1992

STP14572S: Fatigue Strength Reduction Imposed by Porosity in a Fiberglass Composite - 01 January 1992

STP14573S: Ultrasonic Imaging of Delamination Damage around Fastener Holes in a Graphite/Epoxy Composite - 01 January 1992

STP14574S: Impact Damage Assessment of Composites - 01 January 1992

STP14575S: Modelling of Impact Damage Features in Graphite/Epoxy Laminates - 01 January 1992

STP14576S: Ultrasonic Detection of Fatigue Damage in Glass-Epoxy Composite Flywheels - 01 January 1992

STP14577S: Influence of the Stacking Sequence on Fatigue Transverse Ply Cracking in Cross-Ply Laminates - 01 January 1992

STP14578S: Evaluation of Damage Progression in a Composite Material Hip Implant during Long-Term Multiaxial Fatigue - 01 January 1992

STP14564S: Nondestructive X-Ray Tomographic Microscopy of Damage in Various Continuous-Fiber Metal Matrix Composites - 01 January 1992

STP14565S: Application of X-Ray Tomography to the Nondestructive Testing of High-Performance Polymer Composites - 01 January 1992

STP14563S: Examination of Selected NDE Techniques for Ceramic Composite Components - 01 January 1992

STP14567S: Defect Classifications in Composites Using Ultrasonic Nondestructive Evaluation Techniques - 01 January 1992

STP14568S: Application of NDE Data to Finite Element Analysis of Parts Containing Defects - 01 January 1992

STP23716S: Matrix Cracks and Interphase Failure in Transversely Loaded Fiber Composites - 01 January 1992

STP23717S: Dynamic Stress-Intensity Factors for Interface Cracks in Layered Media - 01 January 1992

STP23718S: Probabilistic Fracture Models for Predicting the Strength of Notched Composites - 01 January 1992

STP23719S: Analysis of Unidirectional and Cross-Ply Laminates Under Torsion Loading - 01 January 1992

STP1145-EB: Wear and Friction of Elastomers - 01 January 1992

STP15335S: Tribological Approaches for Elastomer Applications in Computer Peripherals - 01 January 1992

STP15330S: A Review of DOD Wear and Friction Tests for Rubber Products - 01 January 1992

STP15329S: Tribological Characteristics of Elastomeric and Elastomeric/Thermoplastic Contacts under Conformal Sliding Conditions - 01 January 1992

STP15331S: The Role of System Dynamics on the Behavior of Elastomeric Friction - 01 January 1992

STP15332S: Measurement of Frictional Stick-Slip Transitions for Various Elastomeric Materials Sliding against Hard Counterfaces - 01 January 1992

STP15333S: Friction and Wear Characterization of UHMWPE in Reciprocating Sliding Contact with Co-Cr, Ti-6Al-4V, and Zirconia Implant Bearing Surfaces - 01 January 1992

STP15334S: Adherence, Friction and Wear of Rubber-Like Materials - 01 January 1992

STP23823S: NDE Standards for High-Temperature Materials - 01 January 1992

STP15343S: Thermomechanical Cyclic Deformation of Metal-Matrix Composites - 01 January 1992

STP1157-EB: Cyclic Deformation, Fracture, and Nondestructive Evaluation of Advanced Materials - 01 January 1992

STP15346S: Mechanical Properties of Amorphous and Roll-Drawn Polypropylene - 01 January 1992

STP15347S: The Influence of Constituent Properties on the Compression Behavior of Laminates with Discontinuities - 01 January 1992

STP15348S: Cyclic Creep Effects in Single-Overlap Bonded Joints Under Constant-Amplitude Testing - 01 January 1992

STP15349S: Interpretation of Laboratory Test Information for Residual Strength and Life Prediction of Composite Systems - 01 January 1992

STP15351S: Ultrasonic Wave Technique to Assess Cyclic-Load Fatigue Damage in Silicon-Carbide Whisker Reinforced 2124 Aluminum Alloy Composites - 01 January 1992

STP15352S: Nondestructive Characterization for Metal-Matrix Composite Fabrication - 01 January 1992

STP15353S: Nondestructive Evaluation of a Ceramic Matrix Composite Material - 01 January 1992

STP15339S: Fatigue Crack Growth in Ceramics and Ceramic Matrix Composites - 01 January 1992

STP15354S: Acoustic Emission Monitoring of Fatigue in Titanium Aluminide XD Composite - 01 January 1992

STP15355S: On the Flexure Test and Nondestructive Evaluation for Nicalon/CAS Ceramic Composites - 01 January 1992

STP15356S: Split Spectrum Processing of Backscattered Rayleigh Wave Signals to Improve Detectability of Fatigue Microcracks - 01 January 1992

STP15338S: Cyclic Fatigue of Alumina - 01 January 1992

STP15340S: Fatigue Test Methodology and Results for Ceramic Matrix Composites at Room and Elevated Temperatures - 01 January 1992

STP15341S: Small-Crack Behavior and Safety-Critical-Design Criteria for Cyclic Fatigue in Mg-PSZ Ceramics - 01 January 1992

STP15342S: Modeling Crack Growth Resistance in Ceramics and Ceramic-Matrix Composites - 01 January 1992

STP25842S: Fretting Fatigue of Carbon Fiber-Reinforced Epoxy Laminates - 01 January 1992

STP23861S: Applications of Materials Wear Testing to Solids Transport via Centrifugal Slurry Pumps - 01 January 1992

STP1167-EB: Wear Testing of Advanced Materials - 01 January 1992

STP23862S: Results from a U.K. Interlaboratory Project on Dry Sliding Wear of Alumina - 01 January 1992

STP23863S: Wear Diagram for Sliding of Silicon Nitrides - 01 January 1992

STP23864S: Sliding Wear Testing and Data Analysis Strategies for Advanced Engineering Ceramics - 01 January 1992

STP23855S: Effect of Test Machine Dynamics on the Sliding Wear of Alumina - 01 January 1992

STP23856S: Evaluation of Wear Materials for Seal Applications - 01 January 1992

STP23857S: Apparatus for Thrust Wear Testing of Advanced Tribological Materials - 01 January 1992

STP23854S: Effect of Test Variables on the Friction and Wear of Alumina - 01 January 1992

STP23859S: Fretting Wear of Continuous Fiber-Reinforced Polymer Composites - 01 January 1992

STP23860S: Evaluation of Abrasive Particle Trajectories in a Slurry Jet During Erosion of Metal Matrix Composites - 01 January 1992

STP17960S: Effect of Microstructure on Damping in Metal-Matrix Composites: A Review - 01 January 1992

STP17966S: Wave Attenuation in Fiber-Reinforced Composites - 01 January 1992

STP17968S: Modeling and Measurement of Axial and Flexural Damping in Metal-Matrix Composites - 01 January 1992

STP17975S: High-Temperature Anelastic Relaxation of Dense Zircon Bodies - 01 January 1992

STP17976S: Damping and Dynamic Elastic Modulus of Ceramics and Ceramic-Matrix Composites at Elevated Temperatures - 01 January 1992

STP17979S: Integrated Mechanics for the Passive Damping of Polymer-Matrix Composites and Composite Structures - 01 January 1992

STP17980S: Experimental Studies on Material Damping Characteristics of Carbon-Carbon Composites - 01 January 1992

STP17952S: The Measurement of the Material Damping of High Polymers Over Ten Decades of Frequency and its Interpretation - 01 January 1992

STP17981S: Modeling Damping Behavior of Composite Materials Using the Finite Element Method (FEM) - 01 January 1992

STP17982S: Mechanical Properties of Tungsten Carbide-11 Cobalt (WC-11Co) Studied by Internal Friction - 01 January 1992

STP17983S: Internal Friction in Silicon-Carbon/Glass Ceramic Composites - 01 January 1992

STP17957S: Irreversible Heat Transfer as a Source of Thermoelastic Damping - 01 January 1992

STP24717S: Chevron-Notched, Flexure Tests for Measuring the Elevated-Temperature Fracture Resistance of Structural Ceramics - 01 January 1992

STP24711S: Fracture Toughness Evaluation of Ceramic Bonds Using a Chevron-Notch Disk Specimen - 01 January 1992

STP14876S: Use of the Constrained Blister Test to Study Sealant Adhesion - 01 January 1992

STP14870S: Usefulness of Accelerated Test Methods for Sealant Weathering - 01 January 1992

STP14877S: The Influence of Gloss Level in Polyester-Powder Coatings on the Adhesion of Silicone Sealants - 01 January 1992

STP14878S: Mortar Block Surface Preparation and ASTM C 794 - 01 January 1992

STP14879S: Adhesion of Silicone Sealants to Organic-Coated Aluminium - 01 January 1992

STP14880S: Accommodation of Movement within Building Seals and Sealants for Highrise Tower Architecture and Construction - 01 January 1992

STP14881S: Performance of a Modified Sealant Fillet Detail - 01 January 1992

STP14882S: Difficult Sealant Joints - 01 January 1992

STP14869S: Extended Laboratory Testing for Two Structural Glazing Silicone Sealants - 01 January 1992

STP14883S: Applicability of Artificial Weathering Tests for Performance Evaluation of Elastomeric Sealants - 01 January 1992

STP14884S: Stress Distributions in Highway Joint Seals - 01 January 1992

STP14885S: Factors Governing the Life-Expectancy of Dual-Sealed Insulating Glass Units - 01 January 1992

STP14886S: Comparison of an Insulating Glass Polyurethane Sealant Based on Hydroxylated Polybutadiene Liquid Polymer and a Poysulfide Based One - 01 January 1992

STP14887S: Climate and Performance of Elastomeric Wall Coatings - 01 January 1992

STP14888S: A New Elastomeric Coating Technology for the 90's - 01 January 1992

STP14889S: Replacement of Solvent Based Glazing Compounds with High Performance Water Based Acrylics - 01 January 1992

STP14890S: Silicone Rubber Latex Sealants - 01 January 1992

STP14891S: Advances in One Part Polysulfide Sealant Technology - 01 January 1992

STP14892S: Effect of Early Joint Movement on Oxime Silicons Sealants and Comparison to Other One-Part Silicone Systems - 01 January 1992

STP14893S: Fraction of the Global Normal Irradiance Incident from the Northern Part of a Clear Sky - 01 January 1992

STP14872S: Accelerated Weathering and Heat Stability of Various Perimeter Sealants - 01 January 1992

STP14873S: Evaluation of Cure and Durability Aspects of Building Sealants - 01 January 1992

STP14874S: A Screening Evaluation of Surface Cleaning Fluids and Their Effects Upon the Adhesion of Various Weathersealing Sealants - 01 January 1992

STP14875S: New Tests for Adhesion of Silicone Sealants - 01 January 1992

STP17830S: Laboratory and Field Studies of Polyolefin and Latex Modifiers for Asphalt Mixtures - 01 January 1992

STP1108-EB: Polymer Modified Asphalt Binders - 01 January 1992

STP17831S: Polymer Modified Hot Mix Asphalt — Oregon Experience - 01 January 1992

STP17832S: Performance of Polymer Modified Asphalt Mixes in Kentucky - 01 January 1992

STP17833S: Analysis of the Influence of Low Density Polyethylene Modification (Novophalt) of Asphalt Concrete on Mixture Shear Strength and Creep Deformation Potential - 01 January 1992

STP17823S: Stabilization Mechanisms in Polyolefin-Asphalt Emulsions - 01 January 1992

STP17834S: Field Trials with Polymer Modified Asphalts in Saudi Arabia - 01 January 1992

STP17824S: Rheological Properties of Polymer-Modified Emulsion Residue - 01 January 1992

STP17835S: The Determination of Bitumen and Recycled Tire Rubber Content on Rubberized Asphalt Road Mixtures - 01 January 1992

STP17836S: Comparative Performance of Polymer Modified Hot Mix and the Practical Problems of Ensuring Performance - 01 January 1992

STP17837S: Thermo-Oxidative Degradation of Polymer Modified Bitumen - 01 January 1992

STP17838S: Viscosity Measurements of Polymer Modified Asphalts - 01 January 1992

STP17839S: SBS-Modified Asphalts for Surface Dressing — A Comparison Between Hot-Applied and Emulsified Binders - 01 January 1992

STP17840S: SBS Polymer Modified Asphalt Binder and its Implications on Overlay Design - 01 January 1992

STP17841S: Polymer Modified Asphalt Concrete for Environmental Liners - 01 January 1992

STP17842S: Characterisation of Polymer Modified Asphalt Binders for Roads and Airfields - 01 January 1992

STP17825S: The Determination of SBS, EVA and APP Polymers in Modified Bitumens - 01 January 1992

STP17826S: Influence of Binder Rheology on Rut Resistance of Polymer Modified and Unmodified Hot Mix Asphalt - 01 January 1992

STP17827S: An Evaluation of Heavy Duty Binders in the Laboratory - 01 January 1992

STP17828S: Influence of the Rheological Properties of Modified Asphalt Binders on the Load Deformation Characteristics of the Binder-Aggregate Mixtures - 01 January 1992

STP17829S: Design and Construction of Asphalt Concrete Using Polymer Modified Asphalt Binders - 01 January 1992

STP16875S: Compressed Tablets as a Potential Pesticide Delivery System - 01 January 1992

STP1112-EB: Pesticide Formulations and Application Systems: Eleventh Volume - 01 January 1992

STP16867S: Modeling Human Exposure to Airborne Pesticides in Closed Environments - 01 January 1992

STP16876S: Pesticide Compatibility: The Effect of Carrier - 01 January 1992

STP16877S: Improvements in Dry Flowable Tank Mix Compatibility - 01 January 1992

STP16878S: Solvent and Surfactant Influence on Flash Points of Pesticide Formulations - 01 January 1992

STP16879S: Applications of Dynamic Surface Tension to Adjuvants and Emulsion Systems - 01 January 1992

STP16880S: Production, Formulation and Delivery of Beneficial Microbes for Biocontrol of Plant Pathogens - 01 January 1992

STP16881S: The Expedite® Pesticide Application System; A More Efficient, Safer Backpack Pesticide Application System - 01 January 1992

STP16882S: Effects of Pump Type on Atomization of Spray Formulations - 01 January 1992

STP16883S: Effect of Wear on Spray Characteristics of Fan Pattern Nozzles Made from Different Materials - 01 January 1992

STP16884S: Use of Surface Relationship Models to Predict the Spreading of Nonaqueous Droplets on Johnsongrass - 01 January 1992

STP16885S: Some Factors Affecting Herbicidal Activity of Glyphosate in Relation to Adjuvants and Droplet Size - 01 January 1992

STP16868S: Evaluation of the Carbo-Flo● Pesticide Waste Management System - 01 January 1992

STP16886S: Relationship Between Surfactant Characteristics and the Phytotoxicity of CGA-136872 - 01 January 1992

STP16887S: Evaluating the Field Efficacy of Bacillus thuringiensis Berliner against the Western Spruce Budworm (Lepidoptera:Tortricidae) - 01 January 1992

STP16869S: Starch Matrices for Slow Release of Pesticides - 01 January 1992

STP16866S: The California Food Safety Initiatives: The Impact on Formulators - 01 January 1992

STP16870S: Starch Encapsulated Herbicide Formulations: Scale-Up and Laboratory Evaluations - 01 January 1992

STP16871S: A Method to Monitor Release of an Insecticide From Granules into Soil - 01 January 1992

STP16872S: Temperature-Activated Release of Trifluralin and Diazinon - 01 January 1992

STP16873S: Emulsifiable Concentrate Formulations for Multiple Active Ingredients Using N-Alkylpyrrolidones - 01 January 1992

STP16874S: The Effect of Carrier Temperature on Pesticide Emulsification or Dispersion Characteristics - 01 January 1992

STP17854S: FTIR Techniques for the Analysis of Coating Problems: Solid Sampling Accessories - 01 January 1992

STP20150S: Characterization of IM7 Graphite/Thermoplastic Polyetheretherketone (PEEK) for Spacecraft Structural Applications - 01 January 1992

STP20161S: Composite Material Stub-Blade Wing Joint - 01 January 1992

STP20165S: An Evaluation of the Current Status of Automated Process Control for Thermosetting Composites - 01 January 1992

STP17908S: Dislocation Loop Formation in Ion-Irradiated Polycrystalline Spinel and Alumina - 01 January 1992

STP17909S: Radiation Damage in Fusion Window Materials Studied by Thermal Conductivity - 01 January 1992

STP17910S: Electrical Conductivity of Single Crystal α-Alumina under Neutron and γ-Ray Irradiation - 01 January 1992

STP17911S: Effects of Neutron Irradiation on Ceramics Fiber-Reinforced Composites - 01 January 1992

STP17912S: Mechanistic Interpretation of an Observed Fission-Rate Dependence of Low-Temperature Swelling of Irradiated Uranium Silicide Dispersion Fuels - 01 January 1992

STP19725S: New Trenching Method Using Synthetic Bio-Polymers - 01 January 1992

STP23708S: Advanced Fracture Mechanics Analyses of the Service Performance of Polyethylene Gas Distribution Piping Systems - 01 January 1992

STP19155S: Chemical Resistance Properties of Advanced Glove Materials - 01 January 1992

STP19157S: Assessment of the Resistance of Protective Gloves to Chemicals - 01 January 1992

STP19158S: Testing the Resistance of Protective Clothing Materials to Nitroglycerin and Ethylene Glycol Dinitrate - 01 January 1992

STP19159S: Pesticide Resistance and Thermal Comfort Tests of Protective Clothing in Agriculture - 01 January 1992

STP19160S: Methyl Parathion Residues in Protective Apparel Fabric: Effect of Residual Soils on Decontamination - 01 January 1992

STP19161S: Analysis of 2,4-D Glove Permeation under Controlled Environmental Conditions - 01 January 1992

STP19162S: Resistance of Glove Materials to Permeation by Agricultural Pesticides - 01 January 1992

STP19163S: Pesticide Protection Through Layered Clothing Systems - 01 January 1992

STP19172S: A Preliminary Study of an Intermittent Collection Procedure as an Alternative Permeation Method for Non-Volatile, Water Soluble Chemicals - 01 January 1992

STP19181S: The Evaluation of Protective Clothing as Chemical Barriers for Mixers/Loaders and Applicators in Agricultural Field Tests Designed to Meet FIFRA GLP Testing Standards - 01 January 1992

STP19185S: Evaluation of Carbonaceous Adsorbent Coated Fabric as a Barrier to Pesticide Penetration for Dermal Exposure Reduction in Pesticide Application - 01 January 1992

STP19188S: Heat Strain Produced by 3 Aircrew Chemical Defence Ensembles Under Hot Conditions: Improvement with an Air-Cooling Vest - 01 January 1992

STP19193S: Anthropometric Analysis of Fit Problems in Chemical Protective Gloves - 01 January 1992

STP19207S: The Use of Bleach Pre-Treatments in Chlorpyrifos Residue Removal from Cotton Workwear - 01 January 1992

STP19209S: Statistical Fit Models of Methyl Parathion Decontamination from Applicator Clothing - 01 January 1992

STP19210S: Residue Removal of Granular Formulation Atrazine and its Dust from Workers' Protective Clothing by Laundering - 01 January 1992

STP19752S: Synergistic Effects of Acid Deposition and Road Salts on Corrosion - 01 January 1992

STP19770S: Impregnation of Concrete with Corrosion Inhibitors - 01 January 1992

STP23731S: Progress with International Standards for the Acquisition and Presentation of Data on Plastics for Computerized Databases - 01 January 1992

STP23750S: Issues in the Development of an Advanced Ceramic Materials Selector Expert System - 01 January 1992

STP23754S: Adhesive Selection by Means of the PAL Program - 01 January 1992

STP23776S: Analysis and Evaluation of Data for Advanced Composite Materials - 01 January 1992

STP23778S: Materials Selection: Object-Oriented Structures for Factoring Polymer Information - 01 January 1992

STP23729S: Standards for the Representation of Thermodynamic Data for Inorganic Materials - 01 January 1992

STP23858S: Wear Testing of Nonmetallic Materials for Bearing Applications - 01 January 1992

STP24239S: Stress Redistribution in Structural Glazing Joints - 01 January 1992

STP1168-EB: Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing - 01 January 1992

STP24240S: Factors Affecting the Durability of Sealants in Contact with the Finish Coating of EIF Systems - 01 January 1992

STP24241S: Thermal Movement Analyses for Panelized Polymer-Based Exterior Insulation and Finish System (PB EIFS) Claddings - 01 January 1992

STP24242S: Analysis of Field-Fabricated Building Deck Waterproofing Systems and Renovation Design Considerations—Case Studies - 01 January 1992

STP24243S: Building Seals and Sealants for Parking Garage Decks in Hawaii - 01 January 1992

STP24232S: The Effect of Movement During Cure on Sealant Strength Development - 01 January 1992

STP24233S: The Effect of Building Joint Movements on Outdoor Performance of Sealants During Their Cure - 01 January 1992

STP24234S: Polysulfide Sealants in Water-Retaining Structures - 01 January 1992

STP24235S: Sealants for Construction Joints Subjected to Continuous Water Immersion - 01 January 1992

STP24230S: Deformation of Building Sealants Due to Movement During Cure - 01 January 1992

STP24236S: Design, Fabrication, and Performance Considerations for Insulating Glass Edge Seals - 01 January 1992

STP24237S: A Load-Displacement Model for Structural Glazing Joints in Tension and Shear - 01 January 1992

STP24238S: Shear Component of a Structural Sealant Glazing Joint - 01 January 1992

STP24231S: The Impact of Curing Conditions on the Appearance of Sealant Before and After Artificial Weathering - 01 January 1992

STP24718S: Short Bar Chevron-Notch Fracture Toughness of Bone Cement - 01 January 1992

STP24712S: Fracture Toughness of Composite Laminates and Metallic Materials Using a Modified CNSB Specimen - 01 January 1992

STP1200-EB: Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Second Volume - 01 January 1992

STP19089S: Acoustic Emission Technology Using Multi-Parameter Analysis of Waveform and Application to GFRP Tensile Tests - 01 January 1991

STP19097S: Relationship between Acoustic Emission and Flaw Size in Si3N4 Ceramics - 01 January 1991

STP19098S: A Comparison of the Acoustic Emission Generated from the Fracture and Decohesion of Graphite Nodules with Theoretical Predictions - 01 January 1991

STP19109S: Fracture Mechanism Studies of a Carbon Fiber-Peek Composite by Acoustic Emission - 01 January 1991

STP19110S: On the Correlation between Acoustic Emission and Progression of Matrix Splitting in a Unidirectional Graphite/Epoxy Composite - 01 January 1991

STP19111S: Identification of Fatigue Failure Modes in Carbon Fibre Reinforced Composites with the Energy Discriminating Acoustic Emission Method - 01 January 1991

STP19112S: Detection of Impact Damage in Composite Bi-Axial Test Specimens by Use of Thermally-Activated Acoustic Emission - 01 January 1991

STP17715S: Effects of Moisture Absorption on Edge Delamination, Part II: An Experimental Study of Jet Fuel Absorption on Graphite-Epoxy - 01 January 1991

STP1110-EB: Composite Materials: Fatigue and Fracture (Third Volume) - 01 January 1991

STP17716S: Effect of Porosity on Flange-Web Corner Strength - 01 January 1991

STP17717S: Mixed-Mode Fracture in Fiber-Polymer Composite Laminates - 01 January 1991

STP17718S: Effects of T-Tabs and Large Deflections in Double Cantilever Beam Specimen Tests - 01 January 1991

STP17719S: Experimental Determination of the Mode I Behavior of a Delamination Under Mixed-Mode Loading - 01 January 1991

STP17720S: Stabilized End Notched Flexure Test: Characterization of Mode II Interlaminar Crack Growth - 01 January 1991

STP17721S: Initiation and Growth of Mode II Delamination in Toughened Composites - 01 January 1991

STP17722S: Evaluation of the Split Cantilever Beam for Mode III Delamination Testing - 01 January 1991

STP17723S: Fracture Analysis of Transverse Crack-Tip and Free-Edge Delamination in Laminated Composites - 01 January 1991

STP17724S: Combined Effect of Matrix Cracking and Free Edge on Delamination - 01 January 1991

STP17711S: Matrix Cracking in Composite Laminates with Resin-Rich Interlaminar Layers - 01 January 1991

STP17725S: Fatigue Delamination Onset Prediction in Unidirectional Tapered Laminates - 01 January 1991

STP17726S: Delamination Analysis of Tapered Laminated Composites Under Tensile Loading - 01 January 1991

STP17727S: Analysis of Delamination Growth in Compressively Loaded Composite Laminates - 01 January 1991

STP17728S: A Study of an Implanted Delamination Within a Cylindrical Composite Panel - 01 January 1991

STP17729S: A Comparison of Experimental Observations and Numerical Predictions for the Initiation of Fiber Microbuckling in Notched Composite Laminates - 01 January 1991

STP17730S: Three-Dimensional Stress Analysis of Plain Weave Composites - 01 January 1991

STP17731S: Compression Testing of Thick-Section Composite Materials - 01 January 1991

STP17732S: Influence of Low-Velocity Impact on Composite Structures - 01 January 1991

STP17733S: Effects of Stacking Sequence on Impact Damage Resistance and Residual Strength for Quasi-Isotropic Laminates - 01 January 1991

STP17734S: Relevance of Impacter Shape to Nonvisible Damage and Residual Tensile Strength of a Thick Graphite/Epoxy Laminate - 01 January 1991

STP17735S: Response of Composite Plates to Quasi-Static Impact Events - 01 January 1991

STP17736S: Compression of Composite Materials: A Review - 01 January 1991

STP17712S: The Upper Bounds of Reduced Axial and Shear Moduli in Cross-Ply Laminates with Matrix Cracks - 01 January 1991

STP17737S: Fatigue Behavior of Continuous Carbon Fiber-Reinforced PEEK - 01 January 1991

STP17738S: Damage-Based Notched Strength Modeling: A Summary - 01 January 1991

STP17739S: Fatigue Damage Mechanics of Notched Graphite-Epoxy Laminates - 01 January 1991

STP17740S: Hole Effect and Compression Fatigue of T300/N5208 Composite Materials - 01 January 1991

STP17741S: Effect of Interlaminar Normal Stresses on the Uniaxial Zero-to-Tension Fatigue Behavior of Graphite/Epoxy Tubes - 01 January 1991

STP17742S: Effects of Notch Geometry and Moisture on Fracture Strength of Carbon/Epoxy and Carbon/Bismaleimide Laminates - 01 January 1991

STP17743S: Fatigue Failure Processes in Aligned Carbon-Epoxy Laminates - 01 January 1991

STP17744S: Fracture of Fibrous Metal Matrix Composites Containing Discontinuities - 01 January 1991

STP17713S: Cooling Rate Effects in Carbon Fiber/PEEK Composites - 01 January 1991

STP17745S: Fatigue Crack Growth in a Unidirectional SCS-6/Ti-15-3 Composite - 01 January 1991

STP17746S: Thermomechanical Fatigue of a Quasi-Isotropic Metal Matrix Composite - 01 January 1991

STP17747S: Observations of Fatigue Crack Initiation and Damage Growth in Notched Titanium Matrix Composites - 01 January 1991

STP17748S: Damage and Performance Characterization of ARALL Laminates Subjected to Tensile Cyclic Loading - 01 January 1991

STP17749S: Effective Crack Lengths by Compliance Measurement for ARALL-2 Laminates - 01 January 1991

STP17750S: An Investigation of the Effects of Temperature on the Impact Behavior and Residual Tensile Strength of an ARamid Aluminum Laminate (ARALL-2 Laminate) - 01 January 1991

STP17714S: Effects of Moisture Absorption on Edge Delamination, Part I: Analysis of the Effects of Nonuniform Moisture Distributions on Strain Energy Release Rate - 01 January 1991

STP17710S: Fracture Mechanics Approaches to Transverse Ply Cracking in Composite Laminates - 01 January 1991

STP14839S: Effect of Sorption of Organic Volatiles on the Mechanical Properties of Sealant Films - 01 January 1991

STP14844S: Flavor and Aroma Permeability in Plastics - 01 January 1991

STP16861S: The Application of the Multispecimen J-Integral Technique to Toughened Polymers - 01 January 1991

STP16862S: Fracture Toughness of Polycarbonate as Characterized by the J-Integral - 01 January 1991

STP16863S: Determination of JIc for Polymers Using the Single Specimen Method - 01 January 1991

STP23594S: The Use of Thermomechanical Analysis as a Viable Alternative for the Determination of the Tensile Heat Distortion Temperature of Polymer Films - 01 January 1991

STP1136-EB: Materials Characterization by Thermomechanical Analysis - 01 January 1991

STP23596S: Thermomechanical Analysis: Advances in the State of the Art - 01 January 1991

STP23597S: Characterization of Polymer Electrolytes by Simultaneous Thermomechanical Analysis and Dielectric Thermal Analysis Techniques - 01 January 1991

STP23598S: Application of Thermal Mechanical Analysis to Organic Coatings - 01 January 1991

STP23599S: Compositional Effects of Fiber Reinforced Composites on the Coefficient of Thermal Expansion - 01 January 1991

STP23589S: Temperature Calibration of Thermomechanical Analyzers: Part II—An Interlaboratory Test of the Calibration Procedure - 01 January 1991

STP23590S: Evaluating the Accuracy of Thermomechanical Analysis Expansion Coefficient Measurements in a Wide Temperature Range - 01 January 1991

STP23588S: Thermomechanical Analysis in Materials Science - 01 January 1991

STP23592S: Material Characterization by Thermomechanical Analysis: Industrial Applications - 01 January 1991

STP23593S: Elasticity Characterization of Materials During Thermal Treatment by Thermal Mechanical Analysis - 01 January 1991

STP20129S: Silicone Adhesives/Sealants in Curtain Wall Design - 01 January 1991

STP20130S: Innovations in Structural Sealant Glazing - 01 January 1991

STP20131S: Structural Sealant Glazing in the 1980s - 01 January 1991

STP25472S: Analysis for N-Methylcarbamate Pesticides by High Performance Liquid Chromatography in Environmental Samples - 01 January 1991

STP17269S: Planar Morphology Characterization of Metal Matrix Composites - 01 January 1991

STP17274S: Relation of Fiber and Fiber Bundle Distribution to the Properties of Polymer/Glass Composites - 01 January 1991

STP17599S: A Gas Chromatography Detector Based on Chemiluminescence for the Determination of Pesticides - 01 January 1991

STP17608S: Usage of Chemicals in Offshore Oil and Gas Production - 01 January 1991

STP17763S: Effects of Oxygen Concentration, Diluents, and Pressure on Ignition and Flame-Spread Rates of Nonmetals: A Review Paper - 01 January 1991

STP17756S: Test Developments for Polymers in Oxygen-Enriched Environments - 01 January 1991

STP17782S: Test Methods and Interpretation of Results for Selecting Non-Metallic Materials for Oxygen Service - 01 January 1991

STP17757S: Ignition of Nonmetallic Materials by Impact of High Pressure Oxygen III: New Method Development - 01 January 1991

STP17754S: Combustion Fundamentals of Low Volatility Materials in Oxygen-Enriched Atmospheres - 01 January 1991

STP19514S: Track-Sprayer and Glasshouse Techniques for Terrestrial Plant Bioassays with Pesticides - 01 January 1991

STP19521S: Response of Sago Pondweed, a Submerged Aquatic Macrophyte, to Herbicides in Three Laboratory Culture Systems - 01 January 1991

STP19505S: Testing for Pesticide Toxicity to Aquatic Plants: Recommendations for Test Species - 01 January 1991

STP23601S: The Use of Thermal Mechanical Analysis to Characterize Ethylene-Propylene-Diene Terpolymer (EPDM) Roofing Membrane Materials - 01 January 1991

STP23620S: The Role of Valence-Band Excitation in Laser Ablation of KCl - 01 January 1991

STP23655S: Contributions of π' Bonding to the Nonlinear Optical Properties of Inorganic Polymers - 01 January 1991

STP23606S: Multiple-Pulse Damage of BK-7 Glass - 01 January 1991

STP24619S: Measurement and Analysis of Dynamic Modulus in A1/SiC Composites - 01 January 1990

STP24620S: Fiber-Reinforced Composites: Models for Macroscopic Elastic Constants - 01 January 1990

STP24623S: Acoustic Resonance Methods for Measuring Dynamic Elastic Modulus of Adhesive Bonds - 01 January 1990

STP25285S: Application of Numerical Simulations to Evaluate Components of Potential Difference in Solution - 01 January 1990

STP24110S: A Rational Development of Lamina-to-Laminate Analysis Methods for Fibrous Composites - 01 January 1990

STP1059-EB: Composite Materials: Testing and Design (Ninth Volume) - 01 January 1990

STP24111S: Failure Analysis of Bolted Joints in Composite Laminates - 01 January 1990

STP24112S: Ply-Level Failure Analysis of a Graphite/Epoxy Laminate Under Bearing-Bypass Loading - 01 January 1990

STP24113S: Mechanics of Instability-Related Delamination Growth - 01 January 1990

STP24114S: Understanding and Predicting Sublaminate Damage Mechanisms in Composite Structures - 01 January 1990

STP24115S: Characterization of Mode I and Mode II Delamination Growth and Thresholds in AS4/PEEK Composites - 01 January 1990

STP24116S: Three-Dimensional Analysis of Combined Free-Edge and Transverse-Crack-Tip Delamination - 01 January 1990

STP24117S: A Criterion for Mixed-Mode Matrix Cracking in Graphite-Epoxy Composites - 01 January 1990

STP24118S: Fatigue Growth, Deflections, and Crack-Opening Displacements in Cracked Lap Shear Specimens - 01 January 1990

STP24119S: Delamination Fracture Between Adhesive and Adherends in Bonded Joints - 01 January 1990

STP24120S: Matrix Toughness, Long-Term Behavior, and Damage Tolerance of Notched Graphite Fiber-Reinforced Composite Materials - 01 January 1990

STP24121S: Influence of Load Levels on Damage Growth Mechanisms of Notched Composite Materials - 01 January 1990

STP24122S: Investigation of Damage in Composite Laminates Using the Incremental Strain Test - 01 January 1990

STP24123S: Damage Development and Shear Modulus Degradation in Graphite/Epoxy Laminates - 01 January 1990

STP24124S: Analytical and Experimental Investigations of Composites Using Vibrothermography - 01 January 1990

STP24125S: Evaluation of the Damage Development in Carbon Fiber Reinforced Plastics by Monitoring Load-Induced Temperature Changes - 01 January 1990

STP24126S: Loading Rate Sensitivity of Open-Hole Composite Specimens in Compression - 01 January 1990

STP24127S: Thermoviscoelastic Characterization and Prediction of Kevlar/Epoxy Composite Laminates - 01 January 1990

STP24107S: Residual Tensile Strength of Graphite/Epoxy and Kevlar/Epoxy Laminates with Impact Damage - 01 January 1990

STP24128S: A Failure Criterion Evaluation for Composite Materials - 01 January 1990

STP24129S: Composite Shear Moduli and Strengths from Torsion of Thick Laminates - 01 January 1990

STP24130S: A Deformation-Formulated Micromechanics Model of the Effective Young's Modulus and Strength of Laminated Composites Containing Local Ply Curvature - 01 January 1990

STP24131S: Experimental Investigations and a Model Proposal on Damage Mechanisms in a Reinforced Carbon-Carbon Composite - 01 January 1990

STP24108S: Impact Damage and Residual Strength Analysis of Composite Panels with Bonded Stiffeners - 01 January 1990

STP24105S: Towards a Damage Tolerance Philosophy for Composite Materials and Structures - 01 January 1990

STP24109S: Some Observations About Test Specimens and Structural Analysis for Fibrous Composites - 01 January 1990

STP23434S: Surface Cracks in Thick Laminated Fiber Composite Plates - 01 January 1990

STP23435S: Surface Crack Analysis Applied to Impact Damage in a Thick Graphite/Epoxy Composite - 01 January 1990

STP23438S: Observations of Three-Dimensional Surface Flaw Geometries During Fatigue Crack Growth in PMMA - 01 January 1990

STP23484S: Luminescence and Thermal Lensing in Micellar and Related Media - 01 January 1990

STP1066-EB: Laser Techniques in Luminescence Spectroscopy - 01 January 1990

STP23485S: Laser Photolytic Fragmentation-Fluorescence Spectrometry of Nonfluorescent Organic and Organometalllc Molecules - 01 January 1990

STP23486S: Laser Induced Luminescence Spectroscopy on Solid Substrates: An Overview - 01 January 1990

STP23487S: Laser Based Fluorescence Methods for Materials Science - 01 January 1990

STP23488S: Subattomole Amino Acid Analysis by Laser-Induced Fluorescence: The Sheath Flow Cuvette Meets Capillary Zone Electrophoresis - 01 January 1990

STP23477S: Techniques and Applications of Two-Photon Spectroscopy of Inorganic Solids - 01 January 1990

STP23476S: Laser Fluorescence Fingerprints of Environmental Materials - 01 January 1990

STP23479S: Laser Induced Fluorescence and Ionization Techniques for Combustion Diagnostics - 01 January 1990

STP23480S: Fluorescence Spectroscopy in the Analysis of Deoxyribonucleic Acid (DNA) Adducts - 01 January 1990

STP23481S: Temperature and Laser Intensity Effects in Highly Resolved Fluorescence Spectra of Tetracene in Cryogenic Matrices - 01 January 1990

STP23482S: Laser Based Approaches to Increase Fiber-Optic-Based Selectivity: Dynamic Fluorescence Spectroscopy - 01 January 1990

STP23483S: Laser Methods in Time-Resolved Anisotropy Measurements: Tetracene in 1-n-Dodecanol - 01 January 1990

STP25394S: Toughness Models of Whisker-Reinforced Ceramic Matrix Composites - 01 January 1990

STP1080-EB: Thermal and Mechanical behavior of Metal Matrix and Ceramic Matrix Composites - 01 January 1990

STP25395S: Comparison of High-Temperature Tension Testing Results of Ceramic Fibers - 01 January 1990

STP25396S: Comparison of Methods for Determining Fiber/Matrix Interface Frictional Stresses in Ceramic Matrix Composites - 01 January 1990

STP25397S: Monotonic and Cyclic Behavior of a Silicon Carbide/Calcium-Aluminosilicate Ceramic Composite - 01 January 1990

STP25398S: Mechanical and Thermal Properties of Silicon-Carbide Particle-Reinforced Aluminum - 01 January 1990

STP25399S: Temperature-Dependent Tensile and Shear Response of P100/6061 Graphite-Aluminum - 01 January 1990

STP25400S: The Bonding Strength at the Fiber/Matrix Interface of Metal Matrix Composites - 01 January 1990

STP25401S: Mechanical Characterization of Unnotched SCS6/Ti-15-3 Metal Matrix Composites at Room Temperature - 01 January 1990

STP25389S: Plasticity Analysis of Fibrous Composite Laminates Under Thermomechanical Loads - 01 January 1990

STP25402S: Fatigue Crack Growth in an Al2O3 Short Fiber Reinforced Al-2Mg Alloy - 01 January 1990

STP25403S: Ceramics Tensile Grip - 01 January 1990

STP25388S: Local Stresses in Metal Matrix Composites Subjected to Thermal and Mechanical Loading - 01 January 1990

STP25390S: Thermomechanical, Time-Dependent Analysis of Layered Metal Matrix Composites - 01 January 1990

STP25392S: Effects of Environmental and Microstructural Variables on the Plastic Deformation of Metal Matrix Composites Under Changing Temperature Conditions - 01 January 1990

STP25393S: Analysis of a Ceramic Matrix Composite Flexure Specimen - 01 January 1990

STP1083-EB: Liquid Particle Size Measurement Techniques: 2nd Volume - 01 January 1990

STP25284S: Correction of Experimental Data for the Ohmic Potential Drop Corresponding to a Secondary Current Distribution on a Disk Electrode - 01 January 1990

STP1056-EB: The Measurement and Correction of Electrolyte Resistance in Electrochemical Tests - 01 January 1990

STP25290S: Measurement of the Components of the Ohmic Resistance in Lithium/lodine (P2VP) Batteries - 01 January 1990

STP25291S: The Importance of Ohmic Potential Drop in Crevice Corrosion - 01 January 1990

STP25280S: IR Drop in Electrochemical Corrosion Studies— Part I: Basic Concepts and Estimates of Possible Measurement Errors - 01 January 1990

STP25279S: Influence of Electrolyte Resistance on Electrochemical Measurements and Procedures to Minimize or Compensate for Resistance Errors - 01 January 1990

STP25281S: Theoretical Problems Related to Ohmic Resistance Compensation - 01 January 1990

STP25282S: IR Drop in Electrochemical Corrosion Studies—Part 2: A Multiple Method IR Compensation System - 01 January 1990

STP25283S: Determination and Elimination of the Uncompensated Resistance in Low Conductivity Media - 01 January 1990

STP24106S: Certification Testing Methodology for Fighter Hybrid Structure - 01 January 1990

STP26800S: Behavior of Fillet Sealant Joints - 01 January 1990

STP1069-EB: Buildings Sealants: Materials, Properties, and Performance - 01 January 1990

STP26801S: Experimental Work Carried out in Support of the Development of an International Standard on Movement Capability of Sealants - 01 January 1990

STP26802S: Design of Sealant Joints - 01 January 1990

STP26803S: Temperature and Moisture Effects on the Engineering Properties of Silicone Sealants - 01 January 1990

STP26804S: Adhesive Properties of Silicone Sealants - 01 January 1990

STP26805S: The Influence of Heat Ageing on One-Part Construction Silicone Sealants - 01 January 1990

STP26806S: The Water Resistance of Sealants for Construction - 01 January 1990

STP26807S: Use of Q-U-V to Predict the Edge Compatibility of Commercial Sealants with Laminated Glass - 01 January 1990

STP26794S: Sealant Stresses in Structural Glazing: A Mathematical Model - 01 January 1990

STP26808S: Criteria for Design and Testing of Sealants Used in Single-Ply Roofing and Waterproofing Systems - 01 January 1990

STP26809S: Polyurethane - A Simple Method of Selecting Polyurethane Sealants for Your Particular Application - 01 January 1990

STP26810S: Silicon Modified Polyethers for Moisture Cured Sealants - 01 January 1990

STP26811S: Sealant Back-up Material and New Developments - 01 January 1990

STP26812S: European Experiences of Sealants in Service, Correlation to Results from Laboratory Tests - 01 January 1990

STP26813S: Sealant Usage for Exterior Insulation and Finish Systems - 01 January 1990

STP26814S: Why Construction Sealants Fail -- An Overview - 01 January 1990

STP26815S: Status of High-Rise Building Sealants in the U.S. - 01 January 1990

STP26816S: Architectural Design Challenges for Sealant Technology and Design Standards - 01 January 1990

STP26795S: Changes in Seal Shapes of Structurally Glazed Insulating Glass Units - 01 January 1990

STP26796S: Structural Silicone Sealant Requirements for Attaching Stone Panels for Exterior Applications - 01 January 1990

STP26797S: Comparison of European and U.S. Testing/Qualification Procedures for Structural Glazing Silicone Sealants - 01 January 1990

STP26798S: Structural Glazing from a Curtain Wall Designer's Perspective - 01 January 1990

STP26793S: Resistance of Structural Silicones to Creep Rupture and Fatigue - 01 January 1990

STP26799S: Sealant Stresses in Tension and Shear - 01 January 1990

STP1078-EB: Pesticide Formulations and Application Systems: 10th Volume - 01 January 1990

STP25375S: Soil Organic Matter Sensing for Precision Herbicide Application - 01 January 1990

STP25366S: Recent Progress and Issues on Inerts Testing - 01 January 1990

STP25376S: Direct Injection of Dry Flow Able Agricultural Pesticides - 01 January 1990

STP25377S: On-the-Go Application of Dry and Liquid Herbicides with Granular Fertilizer - 01 January 1990

STP25378S: Droplet Dynamics in Hydraulic Nozzle Spray Clouds - 01 January 1990

STP25379S: Droplet Spectra for Some Agricultural Fan Nozzles, with Respect to Drift and Biological Efficiency - 01 January 1990

STP25380S: Pesticide Drop Size as a Function of Spray Atomizers and Liquid Formulations - 01 January 1990

STP25367S: Starch-Encapsulated Herbicides: Approach to Reduce Groundwater Contamination - 01 January 1990

STP25381S: Pesticide Delivery Systems: Spray Distribution and Partitioning in Plant Canopies - 01 January 1990

STP25382S: Off Target Pesticide Losses Resulting from the Use of an Air-assisted Orchard Sprayer - 01 January 1990

STP25383S: Effect of Sprayer Bounce and Wind Condition on Spray Pattern Displacement of Two Agricultural Nozzles - 01 January 1990

STP25384S: Subsurface Injection of Turfgrass Insecticides - 01 January 1990

STP25385S: Individual Mound Treatment for Rapid Control of Fire Ants - 01 January 1990

STP25368S: Evaluation of Cyclodextrin Complexes of Pesticides for Use in Minimization of Groundwater Contamination - 01 January 1990

STP25369S: Development and Properties of Transport -- a New Inert Granular Carrier - 01 January 1990

STP25365S: The Role of Risk Assessment in the Regulation of Pesticides - 01 January 1990

STP25370S: Evaluation of Airborne Dust Measurement Methods for Agricultural Chemical Carriers - 01 January 1990

STP25371S: Effect of Spray Deposit Characteristics on Insecticide Efficacy - 01 January 1990

STP25372S: Cuticular Wax Solubility and Leaf-Cell Membrane Permeability of Petroleum Solvents - 01 January 1990

STP25373S: Effects of Spray Oils on Temperature, Net Gas Exchange, and Phytotoxicity of Citrus Leaves - 01 January 1990

STP25374S: Influence of Two Polymeric Adjuvants on Physical Properties, Droplet Spreading and Drying Rates, and Foliar Uptake and Translocation of Glypkosate in Vision® Formulation - 01 January 1990

STP23509S: Classification of Emulsified Recycling Agents - 01 January 1990

STP23512S: Studies of Polymer-Modified Microsurfacing Materials in Highway Maintenance - 01 January 1990

STP25391S: Computational Simulation of High-Temperature Metal Matrix Composites Cyclic Behavior - 01 January 1990

STP26089S: Criteria for the Selection of Penetrating Hydrophobic Sealers Used in the Repair of Concrete Parking Decks - 01 January 1990

STP19049S: Development of Guidelines for Testing Pesticide Toxicity to Nontarget Plants for Canada - 01 January 1990

STP19067S: Time-Dependent Toxicity Assessment of Herbicide Contaminated Soil Using the Green Alga Selenastrum capricornutum - 01 January 1990

STP25028S: A PC-Based Data Acquisition System for Composite Material Fracture Testing - 01 January 1990

STP42116S: The Fatigue Response of Polyvinyl Chloride and Polyethylene Pipe Systems - 01 January 1990

STP1093-EB: Buried Plastic Pipe Technology - 01 January 1990

STP42117S: Load-deflection Field Test of 27-inch (675-mm) PVC (Polyvinyl Chloride) Pipe - 01 January 1990

STP42118S: Soil Properties for Plastic Pipe Installations - 01 January 1990

STP42119S: Is PVC Pipe Strain Limited after all these Years? - 01 January 1990

STP42120S: Field Experience, Performance Testing and Design of Very Flexible Thermoplastic Pipe Systems - 01 January 1990

STP42121S: Vertical Deflection of Buried Flexible Pipes - 01 January 1990

STP42122S: Field Experience with Fiberglass Pipe in the Middle East - 01 January 1990

STP42111S: The Durability of Polyethylene Piping - 01 January 1990

STP42123S: Some Experience with 30 Years Old Buried (uPVC) Pipes from the Viewpoint of Stress and Strain - 01 January 1990

STP42124S: The Design of Underground Thrust Restrained Systems for Polyvinyl Chloride (PVC) Pipe - 01 January 1990

STP42125S: Review of the Relationship Between Internal Shear Resistance and Arching in Plastic Pipe Installations - 01 January 1990

STP42126S: Recent Trends in Installation Standards for Plastic Pipe - 01 January 1990

STP42127S: Large Diameter Sewer Rehabilitation by Sliplining in Florida - 01 January 1990

STP42128S: Reduction, Reversion, Renovation:R3 - 01 January 1990

STP42129S: “Cured-In-Place Pipe: An end User Assessment” - 01 January 1990

STP42130S: Review of Design and Experience with Thermoplastic Outfall Piping - 01 January 1990

STP42131S: Use of Continuum Buckling Theory for Evaluation of Buried Plastic Pipe Stability - 01 January 1990

STP42132S: Installation of Fiberglass Pipe on Sewer Force Main Projects - 01 January 1990

STP42133S: Plastic Pipes Under High Landfills - 01 January 1990

STP42134S: 15 Year Old Polyvinyl Chloride (PVC) Sewer Pipe; A Durability and Performance Review - 01 January 1990

STP42112S: Fiberglass Pipe Product Standards — An Update on Performance - 01 January 1990

STP42113S: ATVA 127 — As it Relates to Plastic Pipe Design - 01 January 1990

STP42114S: The Role of ANSI/NSF Standard 61 and Third-Party Certification in Providing Safe Drinking Water - 01 January 1990

STP42110S: Retention of Pipe Stiffness for Polyvinyl Chloride (PVC) Pipe Samples Exposed to Various Environments and Constant Strain - 01 January 1990

STP42115S: Ultrasonic Evaluation of Polyethylene Butt Fused Joints - 01 January 1990

STP20111S: Use of Hazard Models in Evaluating the Effect of Exposure Duration on the Acute Toxicity of Three Pesticides - 01 January 1990

STP26501S: Optical Properties and Laser Damage Measurements of Inorganic Polymer Films - 01 January 1990

STP26524S: Theoretical Determination of the Nonlinear Optical Properties of Inorganic Polymers - 01 January 1990

STP26526S: Photoconductivity of ZnS and ZnSe - 01 January 1990

STP10023S: The Role of Statistical Data Reduction in the Development of Design Allowables for Composites - 01 January 1989

STP1003-EB: Test Methods and Design Allowables for Fibrous Composites: 2nd Volume - 01 January 1989

STP10024S: Statistical Methods for Calculating Material Allowables for MIL-HDBK-17 - 01 January 1989

STP10025S: Strength of a Thick Graphite/Epoxy Rocket Motor Case After Impact by a Blunt Object - 01 January 1989

STP10017S: Environmental Effects on High Strain Rate Properties of Graphite/Epoxy Composite - 01 January 1989

STP10026S: A Test Method to Measure the Response of Composite Materials Under Reversed Cyclic Loads - 01 January 1989

STP10027S: A Through-the-Thickness Strength Specimen for Composites - 01 January 1989

STP10028S: Use of Torsion Tubes to Measure In-Plane Shear Properties of Filament-Wound Composites - 01 January 1989

STP10029S: The Torsional Failure and Fracture Energy in Shear of Pultruded Rod - 01 January 1989

STP10030S: The Influence of Test Fixture Design on the losipescu Shear Test for Fiber Composite Materials - 01 January 1989

STP10031S: Elastic-Plastic Stress Concentrations Around Crack-like Notches in Continuous Fiber Reinforced Metal Matrix Composites - 01 January 1989

STP10032S: Method for Monitoring In-Plane Shear Modulus in Fatigue Testing of Composites - 01 January 1989

STP10018S: Mechanical Properties Characterization of Composite Sandwich Materials Intended for Space Antenna Applications - 01 January 1989

STP10016S: High-Temperature Testing of Glass/Ceramic Matrix Composites - 01 January 1989

STP10019S: Low-Temperature Performance of Short-Fiber Reinforced Thermoplastics - 01 January 1989

STP10020S: Sand Erosion of Fiber Composites: Testing and Evaluation - 01 January 1989

STP10021S: Abrasive Wear Behavior of Unidirectional and Woven Graphite Fiber/Peek Composites - 01 January 1989

STP10022S: Test Methods for Determining Design Allowables for Fiber Reinforced Composites - 01 January 1989

STP10411S: The Influence of Fiber, Matrix, and Interface on Transverse Cracking in Carbon FiberReinforced Plastic Cross-Ply Laminates - 01 January 1989

STP1012-EB: Composite Materials: Fatigue and Fracture, Second Volume - 01 January 1989

STP10412S: Micromechanics of Compression Failures in Open Hole Composite Laminates - 01 January 1989

STP10413S: Dynamic Delamination Buckling in Composite Laminates Under Impact Loading: Computational Simulation - 01 January 1989

STP10414S: Edge Stresses in Woven Laminates at Low Temperatures - 01 January 1989

STP10415S: Predicting Interlaminar Fatigue Crack Growth Rates in Compressively Loaded Laminates - 01 January 1989

STP10416S: Mode I Interlaminar Fracture Toughness of Unidirectional Carbon Fiber Composites Using a Novel Wedge-Driven Delamination Design - 01 January 1989

STP10406S: Fatigue Life Prediction of Cross-Ply Composite Laminates - 01 January 1989

STP10417S: Mode II Delamination Fracture Toughness of Unidirectional Graphite/Epoxy Composites - 01 January 1989

STP10418S: Interlaminar Shear Fracture Toughness and Fatigue Thresholds for Composite Materials - 01 January 1989

STP10419S: Mode I and Mode II Delamination of Thermosetting and Thermoplastic Composites - 01 January 1989

STP10420S: Free-Edge Delamination Characteristics in S2/CE9000 Glass/Epoxy Laminates Under Static and Fatigue Loads - 01 January 1989

STP10421S: Characterization of Matrix Toughness Effect on Cyclic Delamination Growth in Graphite Fiber Composites - 01 January 1989

STP10407S: Consideration of Environmental Conditions for the Fatigue Evaluation of Composite Airframe Structure - 01 January 1989

STP10422S: Delamination Failure Modes in Filament-Wound Composite Tubes - 01 January 1989

STP10423S: Fracture of Pressurized Composite Cylinders with a High Strain-to-Failure Matrix System - 01 January 1989

STP10424S: Fiber Composite Structural Durability and Damage Tolerance: Simplified Predictive Methods - 01 January 1989

STP10425S: Impact Damage Characteristics of Bismaleimides and Thermoplastic Composite Laminates - 01 January 1989

STP10426S: Lateral Impact of Composite Cylinders - 01 January 1989

STP10427S: Delamination Damage in Central Impacts at Subperforation Speeds on Laminated Kevlar/Epoxy Plates - 01 January 1989

STP10408S: Fatigue Damage Development in Notched (02/±45)s Laminates - 01 January 1989

STP10405S: Effects of Matrix Toughness on Fatigue Response of Graphite Fiber Composite Laminates - 01 January 1989

STP10409S: Damage Initiation and Growth in Notched Laminates Under Reversed Cyclic Loading - 01 January 1989

STP10410S: Fatigue of Composite Materials—Damage Model and Life Prediction - 01 January 1989

STP18828S: The New High-Toughness Ceramics - 01 January 1989

STP22851S: A Review of Plasticity Theory of Fibrous Composite Materials - 01 January 1989

STP1032-EB: Metal Matrix Composites: Testing, Analysis, and Failure Modes - 01 January 1989

STP22852S: Analysis of Notched Metal Matrix Composites Under Tensile Loading - 01 January 1989

STP22853S: Modeling Continuous Fiber Metal Matrix Composite as an Orthotropic Elastic-Plastic Material - 01 January 1989

STP22854S: Deformation Analysis of Boron/Aluminum Specimens by Moire Interferometry - 01 January 1989

STP22855S: Strain Intensity Factor Approach for Predicting the Strength of Continuously Reinforced Metal Matrix Composites - 01 January 1989

STP22856S: Fatigue Testing and Damage Development in Continuous Fiber Reinforced Metal Matrix Composites - 01 January 1989

STP22847S: Shear Testing of Fiber Reinforced Metal Matrix Composites - 01 January 1989

STP22857S: Strength Predictions for Metal Matrix Composites - 01 January 1989

STP22858S: Damage Initiation and Growth in Fiber Reinforced Metal Matrix Composites - 01 January 1989

STP22859S: Crack Growth and Fracture of Continuous Fiber Metal Matrix Composites: Analysis and Experiments - 01 January 1989

STP22860S: Fiber-Matrix Interface Failures - 01 January 1989

STP22848S: Techniques for Mechanical and Thermal Testing of Ti3Al/SCS-6 Metal Matrix Composites - 01 January 1989

STP22849S: Techniques for Measurement of the Thermal Expansion of Advanced Composite Materials - 01 January 1989

STP22850S: On the Applicability of Acoustic Emission for Monitoring Damage Progression in Metal Matrix Composites - 01 January 1989

STP22846S: Tension and Compression Testing of Metal Matrix Composite Materials - 01 January 1989

STP24598S: Load-Frequency Effect on Fatigue Life of IMP6/APC-2 Thermoplastic Composite Laminates - 01 January 1989

STP1044-EB: Advances in Thermoplastic Matrix Composite Materials - 01 January 1989

STP24599S: Response of Notched AS4/PEEK Laminates to Tension/Compression Loading - 01 January 1989

STP24601S: Stress-State Effects on the Viscoelastic Response of Polyphenylene Sulfide (PPS) Based Thermoplastic Composites - 01 January 1989

STP24602S: Fiber Orientation and Fracture Morphology in Short Fiber-Reinforced Thermoplastics - 01 January 1989

STP24603S: Mechanical Properties of the Carbon Fiber/PEEK Composite APC-2/AS-4 for Structural Applications - 01 January 1989

STP24604S: Effects of Moisture Content on the Mechanical Properties of Polyphenylene Sulfide Composite Materials - 01 January 1989

STP24605S: Moisture Effects on Mode I Interlaminar Fracture Toughness of a Graphite Fiber Thermoplastic Matrix Composite - 01 January 1989

STP24606S: Interlaminar Fracture Toughness of Thermoplastic Composites - 01 January 1989

STP24607S: Delamination Growth Under Cyclic Loading at Elevated Temperature in Thermoplastic Composites - 01 January 1989

STP24608S: Delamination Resistance of Stitched Thermoplastic Matrix Composite Laminates - 01 January 1989

STP24593S: The Effect of Processing on Autohesive Strength Development in Thermoplastic Resins and Composites - 01 January 1989

STP24594S: Thermoplastic Coating of Carbon Fibers - 01 January 1989

STP24591S: Process Modeling of Thermoplastic Matrix Composites - 01 January 1989

STP24596S: Thermoplastic Matrix Composites: Finite-Element Analysis of Mode I and Mode II Failure Specimens - 01 January 1989

STP24597S: A Study of Graphite/PEEK Under High Temperatures - 01 January 1989

STP18630S: Engineering Plastics via the Dow MEC Data Base - 01 January 1989

STP18632S: Generation and Use of Composite Material Data Bases - 01 January 1989

STP18633S: Designation and Characterization of Composite Materials - 01 January 1989

STP18636S: PC-Access to Ceramic Phase Diagrams - 01 January 1989

STP18637S: Creating a Materials Data Base Builder and Producing Publications for Ceramic Phase Diagrams - 01 January 1989

STP18655S: Approaches to Planning for Dispersant Use in Oil Spill Response - 01 January 1989

STP1018-EB: Oil Dispersants: New Ecological Approaches - 01 January 1989

STP18656S: Planning for Dispersant Use - 01 January 1989

STP18657S: Dispersant Use Considerations - 01 January 1989

STP18658S: Oil Dispersant Guidelines: Alaska - 01 January 1989

STP18659S: Letters of Agreement for the Use of Dispersants - 01 January 1989

STP18660S: Field Measurement of Effectiveness: Historical Review and Examination of Analytical Methods - 01 January 1989

STP18661S: A New Pair of Eyes II. Looking at Dispersants from a Different Point of View - 01 January 1989

STP18662S: Measurements on Natural Dispersion - 01 January 1989

STP18663S: Laboratory Studies on Oil Spill Dispersants - 01 January 1989

STP18664S: Design and Evaluation of a Large Boat-Mounted Dispersant Spraying System and Its Integration with Other Application Equipment - 01 January 1989

STP18665S: Tropical Oil Pollution Investigations in Coastal Systems (Tropics): The Effects of Untreated and Chemically Dispersed Prudhoe Bay Crude Oil on Mangroves, Seagrasses, and Corals in Panama - 01 January 1989

STP18666S: Dispersed Oil Effects on Tropical Nearshore Ecosystems - 01 January 1989

STP18646S: Dispersant Use Guidelines for Freshwater and Other Inland Environments - 01 January 1989

STP18667S: The Behavior of Dispersed and Nondispersed Fuels in a Sewer System - 01 January 1989

STP18647S: Dispersants in the Freshwater Environment - 01 January 1989

STP18648S: Economic Evaluation of Dispersants to Combat Oil Spills - 01 January 1989

STP18649S: The Use of Chemical Dispersants to Control Oil Spills in Shallow Nearshore Waters - 01 January 1989

STP18645S: Effects of Chemical Dispersant Agents on the Behavior and Retention of Spilled Crude Oil in a Simulated Streambed Channel - 01 January 1989

STP18650S: Field Experience with Dispersants for Oil Spills on Land - 01 January 1989

STP18651S: The Effect of Elastomers on the Efficiency of Oil Spill Dispersants - 01 January 1989

STP18652S: Use of a Computerized Spill Response Tool for Emergency Response, Personnel Training, and Contingency Planning - 01 January 1989

STP18653S: The Crisis in Response Training - 01 January 1989

STP18654S: A Computer-Assisted Planning System for Oil Spill Response Chemical Applications - 01 January 1989

STP22911S: An Overview of Flea Control - Indoors - 01 January 1989

STP1036-EB: Pesticide Formulations and Application Systems: International Aspects 9th Volume - 01 January 1989

STP22912S: Effect of Formulation on the Stability and Bioactivity of Methamidophos - 01 January 1989

STP22913S: Drop Size Spectra, Spreading, and Adhesion and Physical Properties of Eight Bacillus Thuringiensis Formulations Following Spray Application under Laboratory Conditions - 01 January 1989

STP22914S: Evaluation Method for Agricultural Foam Markers - 01 January 1989

STP22915S: Testing Methods for Water Dispersible Granules - 01 January 1989

STP22902S: International Registration and Reform Dealing with Formulations - 01 January 1989

STP22916S: Use of an Air-Assisted Electrostatic Sprayer to Increase Pesticide Efficiency in Greenhouses - 01 January 1989

STP22917S: Application, Distribution and Efficacy of Electrostatically Charged Sprays on Chrysanthemums - 01 January 1989

STP22918S: Evaluation of a No-Touch Pesticide Use System - 01 January 1989

STP22919S: Application of Pesticides on-the-go with Granular Fertilizer - 01 January 1989

STP22920S: Deposition Efficiency from Aerial Application of Postemergence Herbicides - 01 January 1989

STP22921S: Fenitrothion Deposits on Simulated and Live Fir Foliage Following Aerial Spraying of Two Formulations - 01 January 1989

STP22903S: Proposition 65, Today and the Future - 01 January 1989

STP22922S: Fenitrothion Deposits on Different Components of a Forest Ecosystem During an Aerial Spray Trial - 01 January 1989

STP22923S: Spray Displacements of Two Agricultural Nozzies Using Spray Patternator - 01 January 1989

STP22924S: Spray Droplet Size Effect on Mortality of Citrus Rust Mite - 01 January 1989

STP22925S: The Effect of Application Volume on Wood Penetration by an Organophosphate Insecticide - 01 January 1989

STP22904S: A Study of Volatile Organic Compounds (VOCS) and Photochemically Reactive Organic Compounds (PROCS) in Relation to Household Pesticide Formulations - 01 January 1989

STP22906S: Effect of Formulation on Fungicidal Activity - 01 January 1989

STP22907S: Epicuticular Wax Solubility in Petroleum Solvents Relative to Herbicide Phytotoxicity - 01 January 1989

STP22908S: New Polymeric Materials for Temperature Controlled Release of Agricultural Chemicals - 01 January 1989

STP22909S: Synthetic Silicas in Pesticide Formulation with Special Emphasis on Water Dispersible Granules - 01 January 1989

STP22910S: The Formulation of Rodenticides for Optimized Efficacy and Safety - 01 January 1989

STP22939S: The Effects of Solvent Type and Concentration on the Permeation of Pesticide Formulations Through Chemical Protective Glove Materials - 01 January 1989

STP22940S: Permeation of Some Pesticidal Formulations Through Glove Materials - 01 January 1989

STP22931S: The Selection and Measurement of Physical Properties for Characterization of Chemical Protective Clothing Materials - 01 January 1989

STP24923S: Further Studies of Factors that Affect the Spontaneous Ignition Temperatures of Non-metallic Materials in Gaseous Oxygen - 01 January 1989

STP24924S: The Ignition Behaviour of Silicone Greases in Oxygen Atmospheres - 01 January 1989

STP24918S: Ignition of Nonmetallic Materials by Impact of High-Pressure Oxygen II: Evaluation of Repeatability of Pneumatic Impact Test - 01 January 1989

STP24934S: Ignition of PTFE-Lined Flexible Hoses by Rapid Pressurization with Oxygen - 01 January 1989

STP24935S: Evolving Non-Swelling Elastomers For High Pressure Oxygen Environments - 01 January 1989

STP24922S: The Oxygen Sensitivity/Compatibility Ranking of Several Materials by Different Test Methods - 01 January 1989

STP24592S: Resin Impregnation During the Manufacture of Thermoplastic Matrix Composite Materials - 01 January 1989

STP24595S: Pultrusion Process Modeling - 01 January 1989

STP22993S: Specimen Length Effects on Mechanical Properties of a Silicone Elastomeric Sealant - 01 January 1989

STP22994S: Silicone Sealants in Insulating Glass - 01 January 1989

STP22987S: Performance Properties of Silicone Structural Adhesives - 01 January 1989

STP22988S: Methods for Calculating Structural Silicone Sealant Joint Dimensions - 01 January 1989

STP22989S: Structural Silicone Sealant Curtain Walls: Field or Factory Glazing? - 01 January 1989

STP22986S: Design Considerations in Structural Sealant Glazing - 01 January 1989

STP22992S: Preformed Butyl Tapes in Glazing Applications - 01 January 1989

STP25256S: On the Use of the R50 - 01 January 1989

STP1055-EB: Vertebrate Pest Control and Management Materials: Sixth Volume - 01 January 1989

STP25257S: Effective Plot Sizes for Testing Red-Winged Blackbird Repellents in a Large Flight Pen - 01 January 1989

STP25254S: A Method for Evaluating Methyl Bromide Fumigant Under Low-Temperature Conditions - 01 January 1989

STP25261S: Evaluation of Some Radioisotopes as Marking Agents for Monitoring Bait Consumption - 01 January 1989

STP26453S: An Overview — Solvents for Agricultural Chemicals - 01 January 1989

STP980-EB: Pesticide Formulations and Application Systems: Eighth Volume - 01 January 1989

STP26454S: Compacting and Granulating Systems for Agricultural Chemicals - 01 January 1989

STP26445S: Philosophy of Formulation - 01 January 1989

STP26455S: Effect of Formulation, Droplet Size, and Spatial Distribution on Dose Transfer of Pesticides - 01 January 1989

STP26456S: Effect of Interaction Between Nozzle Orientation and Crop Canopy Architecture Upon Distribution of Charged and Uncharged Spray Droplets - 01 January 1989

STP26457S: Calibrating Light Imaging and Light Scattering Probes for Atomizer Spray Characterization - 01 January 1989

STP26458S: Charged Drop Application of Antisapstain Formulations to Lumber - 01 January 1989

STP26459S: Assessment of Foliar and Ground Deposits of Aminocarb After Aerial Spraying Over Conifer Forests Using Two Types of Application Parameters - 01 January 1989

STP26460S: Droplet and Deposit Patterns of One Pseudoplastic and Three Newtonian Spray Mixtures Following Spray Application Under Laboratory Conditions - 01 January 1989

STP26461S: Shrouded Sprayer: Advantages in Field Application Systems - 01 January 1989

STP26462S: Spray Volume Effects on Deposition and Citrus Rust Mite Control - 01 January 1989

STP26446S: Developments in Microencapsulation, High Concentration - 01 January 1989

STP26463S: An Invert Emulsion Replaces Dew in Biocontrol of Sicklepod — a Preliminary Study - 01 January 1989

STP26464S: Plant and Mineral Oils as Insecticide Adjuvants: Effects on Residues and Toxicity - 01 January 1989

STP26466S: Aerial Application of a Granular Herbicide - 01 January 1989

STP26447S: Formulation of Pesticide Microemulsions - 01 January 1989

STP26448S: Microbial Formulations — Opportunities and Challenges - 01 January 1989

STP26444S: Formulations — Past, Present, and Future - 01 January 1989

STP26449S: Selecting the Ideal Preservative for Aqueous Pesticide Formulations - 01 January 1989

STP26450S: Using the Predictive Powers of Triangular Co-Ordinate Plots for Designing Agricultural Formulations - 01 January 1989

STP26451S: Quality Control of Surfactants for Pesticide Formulations - 01 January 1989

STP10278S: Experimental Freshwater Microcosm Biodegradability Study of Butyl Benzyl Phthalate - 01 January 1988

STP10304S: Structure-Toxicity Relationships of Para-Position Alkyl- and Halogen-Substituted Monoaromatic Compounds - 01 January 1988

STP10279S: Response of Aquatic Microbial Communities to Surfactants - 01 January 1988

STP10283S: Toxicity of Percolate from Decontaminated Pesticide-Contaminated Soils - 01 January 1988

STP1009-EB: Progress in Analytical Luminescence - 01 January 1988

STP19695S: Summary - 01 January 1988

STP19686S: Optimization of Fluorescence Measurements - 01 January 1988

STP19689S: Resolution of DL-Amino Acids by Capillary Zone Electrophoresis Using Chiral Electrolytes - 01 January 1988

STP19690S: Applications of Fluorescence Techniques in the Analysis of Polycyclic Aromatic Carcinogen—DNA Adduct - 01 January 1988

STP19691S: Excitation and Determination of Protein-Fluorophore Complexes Using Aqueous Peroxyoxalate Chemiluminescence - 01 January 1988

STP19692S: Kinetics of Proton Transfer of Extremely Weak Bases in the Lowest Excited Singlet State in Concentrated Mineral Acid Solutions - 01 January 1988

STP19693S: Chromatographic Determination of Thiols through Selective Fluorescence Derivatization: A Review - 01 January 1988

STP19697S: Considerations in Ceramic Friction and Wear Measurements - 01 January 1988

STP1010-EB: Selection and Use of Wear Tests for Ceramics - 01 January 1988

STP19698S: Unique Friction and Wear Tester for Fundamental Tribology Research - 01 January 1988

STP19702S: Meeting on Standardization of Wear Test Methods for Ceramics, Cermets, and Coatings - 01 January 1988

STP25947S: Statistical Strength Comparison of Metal-Matrix and Polymeric-Matrix Composites - 01 January 1988

STP964-EB: Testing Technology of Metal Matrix Composites - 01 January 1988

STP25948S: Minimechanics Analysis and Testing of Short Fiber Composites: Experimental Methods and Results - 01 January 1988

STP25949S: Minimechanics Analysis and Testing of Short Fiber Composites: Analytical Model and Data Correlation - 01 January 1988

STP25950S: A Unique Set of Micromechanics Equations for High-Temperature Metal Matrix Composites - 01 January 1988

STP25952S: Thermoviscoplastic Nonlinear Constitutive Relationships for Structural Analysis of High-Temperature Metal Matrix Composites - 01 January 1988

STP25941S: Compressive Properties and Laser Absorptivity of Unidirectional Metal Matrix Composites - 01 January 1988

STP25953S: Development of Design Allowables for Metal Matrix Materials - 01 January 1988

STP25954S: Anelastic and Elastic Measurements in Aluminum Metal Matrix Composites - 01 January 1988

STP25955S: Noncontact Ultrasonic Evaluation of Metal Matrix Composite Plates and Tubes - 01 January 1988

STP25956S: Nondestructive Evaluation of Fiber FP Reinforced Metal Matrix Composites - 01 January 1988

STP25957S: Thermal Expansion Measurements of Metal Matrix Composites - 01 January 1988

STP25958S: Alternative Methods for the Determination of Shear Modulus in a Composite Material - 01 January 1988

STP25959S: Fracture Toughness of Thin-Walled Cylinders Fabricated from Discontinuous Silicon Carbide Whiskers/Aluminum Metal Matrix Composites - 01 January 1988

STP25960S: Deformation and Failure Characteristics of Center-Notched Unidirectional Boron/Aluminum at Room and Elevated Temperatures - 01 January 1988

STP25961S: Mechanical Behavior of Silicon Carbide/2014 Aluminum Composite - 01 January 1988

STP25962S: Compressive Testing of Metal Matrix Composites - 01 January 1988

STP25942S: Mechanical Behavior of Three-Dimensional Braided Metal Matrix Composites - 01 January 1988

STP25963S: Elevated Temperature Testing of Metal Matrix Composites Under Rapid Heating Conditions - 01 January 1988

STP25964S: Short-Term High-Temperature Properties of Reinforced Metal Matrix Composites - 01 January 1988

STP25965S: Ultrasonic Inspection of Silicon Carbide Reinforced Aluminum Metal Matrix Composite Billets and Secondary Fabricated Products - 01 January 1988

STP25966S: Influence of Heat Treatments and Working on Mechanical Properties of Silicon Carbide Reinforced Aluminum Alloys - 01 January 1988

STP25967S: Characterization of Thin-Wall Graphite/Metal Pultruded Tubing - 01 January 1988

STP25940S: Thermal-Mechanical Fatigue Test Apparatus for Metal Matrix Composites and Joint Attachments - 01 January 1988

STP25968S: On the Longitudinal and Transverse Tensile Strength and Work of Fracture of a Continuous Fiber Metal Matrix Composite Subjected to Thermal Exposure - 01 January 1988

STP25943S: An Evaluation of the Failure Behavior of 3-D Braided FP/Aluminum-Lithium Composites Under Static and Dynamic Blanking - 01 January 1988

STP25944S: Factors Affecting the Determination of Thermophysical Properties of Metal Matrix Composites - 01 January 1988

STP25945S: Pressure Dependence of the Elastic Constants of Silicon Carbide/2014 Aluminum Composite - 01 January 1988

STP25946S: Micromechanical Modeling of Yielding and Crack Propagation in Unidirectional Metal Matrix Composites - 01 January 1988

STP26131S: The Correlation of Low-Velocity Impact Resistance of Graphite-Fiber-Reinforced Composites with Matrix Properties - 01 January 1988

STP972-EB: Composite Materials: Testing and Design (Eighth Conference) - 01 January 1988

STP26132S: The Sandwich Column as a Compressive Characterization Specimen for Thin Laminates - 01 January 1988

STP26133S: Instability-Related Delamination Growth in Thermoset and Thermoplastic Composites - 01 January 1988

STP26134S: Two-Dimensional Delamination Growth in Composite Laminates Under Compression Loading - 01 January 1988

STP26135S: An Experimental Study of a Curved Composite Panel with a Cutout - 01 January 1988

STP26136S: Characterizing the Tensile Stress-Strain Nonlinearity of Polyacrylonitrile-Based Carbon Fibers - 01 January 1988

STP26137S: Development of a Standard Quality-Control Test Method for Determining the Fiber Strength of Graphitized Roving - 01 January 1988

STP26138S: The Development of a Satisfactory, Simple, Shear Fatigue Test for Unidirectional E-Glass Epoxy - 01 January 1988

STP26126S: Composite Interlaminar Fracture Toughness: Three-Dimensional Finite-Element Modeling for Mixed Mode I, II, and Fracture - 01 January 1988

STP26139S: Height-Tapered Double Cantilever Beam Specimen for Study of Rate Effects on Fracture Toughness of Composites - 01 January 1988

STP26140S: A Constant ΔG Test for Measuring Mode I Interlaminar Fatigue Crack Growth Rates - 01 January 1988

STP26141S: Growth of Elliptic Delaminations in Laminates Under Cyclic Transverse Shear Stresses - 01 January 1988

STP26142S: Analytical and Experimental Investigation of the Notched Strength of Thick Laminates with Surface Notches - 01 January 1988

STP26143S: Analysis of Delamination Growth from Matrix Cracks in Laminates Subjected to Bending Loads - 01 January 1988

STP26144S: Interlaminar Fracture Processes in Resin Matrix Composites Under Static and Fatigue Loading - 01 January 1988

STP26145S: Failure Mechanism of Delamination Fracture - 01 January 1988

STP26146S: The Use of Acoustic Emission to Detect the Onset of Interlaminar Shear Failure in Short Beam Fatigue Specimens - 01 January 1988

STP26147S: Damage Assessment by Acousto-Ultrasonic Technique in Composites - 01 January 1988

STP26149S: Residual Stress and Strength Loss in Filament-Wound Composites - 01 January 1988

STP26127S: Sublaminate- or Ply-Level Analysis of Composites and Strain Energy Release Rates of End-Notch and Mixed-Mode Fracture Specimens - 01 January 1988

STP26150S: Strength of Woven-Fabric Composites with Drilled and Molded Holes - 01 January 1988

STP26151S: Mechanical Behavior of Braided Composite Materials - 01 January 1988

STP26128S: A Cumulative Damage Model for Continuous Fiber Composite Laminates with Matrix Cracking and Interply Delaminations - 01 January 1988

STP26125S: Automated Design of Composite Plates for Improved Damage Tolerance - 01 January 1988

STP26129S: Interlaminar Fracture Analysis of Composite Laminates Under Bending and Combined Bending and Extension - 01 January 1988

STP26130S: Effect of Adhesive Layers on Impact Damage in Composite Laminates - 01 January 1988

STP29133S: Control of Fiber Architecture for Tough Net-Shaped Structural Composites - 01 January 1988

STP30331S: Deformations and Strains in a Thick Adherend Lap Joint - 01 January 1988

STP981-EB: Adhesively Bonded Joints: Testing, Analysis, and Design - 01 January 1988

STP30332S: Factors Influencing Elastic Stresses in Double Cantilever Beam Specimens - 01 January 1988

STP30333S: Special Mixed Finite Elements for Interfacial Stress Analysis of Adhesively Bonded Joints - 01 January 1988

STP30324S: An Examination of Mixed-Mode Debonding in the Blister Test - 01 January 1988

STP30334S: Determination of Stress Distribution in Double-Lap Joints, Matched Asymptotic Expansions and Conformal Mapping - 01 January 1988

STP30336S: Application of Fracture Mechanics and Acoustic Emission to the Characterization of Adhesively Bonded Joints Tested in Mode I Opening - 01 January 1988

STP30337S: Debonding Characteristics of Adhesively Bonded Woven Kevlar Composites - 01 January 1988

STP30338S: Effect of Adhesive Debond on Stress-Intensity Factors in Bonded Composite Panels - 01 January 1988

STP30339S: Static Strength of Bolted and Adhesively Bonded Joints for Steel Structures - 01 January 1988

STP30340S: Understanding Effects of Adhesive Ductility and Bondline Geometry on Tube-and-Socket Joint Performance - 01 January 1988

STP30342S: Environmental Effects on Fracture of Adhesively Bonded Joints - 01 January 1988

STP30343S: Environmental Durability of Adhesively Bonded Joints - 01 January 1988

STP30325S: A Uniform Pure Shear Testing Specimen for Adhesive Characterization - 01 January 1988

STP30344S: Summary - 01 January 1988

STP30326S: Mechanical Behavior Assessment of Epoxy Adhesive in the Double-Lap Joint - 01 January 1988

STP30327S: Determination and Verification of Elastic Parameters for Adhesives - 01 January 1988

STP30323S: Effect of Removing Eccentricity from Button Tensile Adhesion Tests - 01 January 1988

STP30328S: Chevron-Notched Specimens for Measuring Adhesive Fracture Toughness - 01 January 1988

STP30329S: Development of Alternative Techniques for Measuring the Fracture Toughness of Rubber-to-Metal Bonds in Harsh Environments - 01 January 1988

STP30330S: A Test Specimen with Constant Stress Intensity Factor - 01 January 1988

STP27235S: Three-Dimensional Aspects of Fatigue Crack Closure in Surface Flaws in Polymethylmethacrylate Material - 01 January 1988

STP997-EB: Compositional Analysis by Thermogravimetry - 01 January 1988

STP26403S: Applications of Thermogravimetry/Atmospheric Pressure Chemical Ionization Mass Spectrometry to Compositional Analysis - 01 January 1988

STP26404S: Usefulness of Fourier Transform Infrared Spectroscopy in the Analysis of Evolved Gas from the Thermogravimetric Technique - 01 January 1988

STP26406S: A Multielement Evolved Gas Analysis Technique: Design, Performance, and Industrial Applications - 01 January 1988

STP26407S: Thermoanalytical Studies on Simple and Mixed Lanthanide Complexes - 01 January 1988

STP26394S: Industrial Applications of Compositional Analysis by Thermogravimetry - 01 January 1988

STP26393S: The Modern Thermogravimetric Approach to the Compositional Analysis of Materials - 01 January 1988

STP26408S: The Derivation of Kinetic Parameters in Analysis of Portland Cement for Portlandite and Carbonate by Thermogravimetry - 01 January 1988

STP26411S: Thermogravimetry as a Tool for Determining Combustion Efficiency and Calcium Utilization of a Fluidized Bed Combustion Furnace - 01 January 1988

STP26395S: Compositional Analysis by Thermogravimetry: The Development of a Standard Method - 01 January 1988

STP26396S: Using Chemistry in Compositional Analysis by Thermogravimetry - 01 January 1988

STP26397S: Compositional Analysis of Drugs and Injectable Biological Products by Thermogravimetry - 01 January 1988

STP26398S: Thermogravimetric Characterization of Elastomers and Carbon-Filled Rubber Composites for Military Applications - 01 January 1988

STP26399S: Thermogravimetric Analysis of Sheet Molding Compound Materials to Determine Distribution of Compound Components in Molded Parts - 01 January 1988

STP26401S: Determination of the Degree of Mixing of Sheet Molding Compound Paste Using Thermogravimetry - 01 January 1988

STP19687S: Multicomponent Detection and Determination of Polycyclic Aromatic Hydrocarbons Using HPLC and a Phase-Modulation Spectrofluorometer - 01 January 1988

STP19699S: Pin-On-Disk Wear Tests for Evaluating Ceramic Cutting Tool Materials - 01 January 1988

STP19700S: Systematic Testing of Ceramic Rolling Bearing Elements - 01 January 1988

STP19701S: Friction and Wear Testing of Ion Beam Modified Ceramics for High Temperature Low Heat Rejection Diesel Engines - 01 January 1988

STP18737S: Laser Photoconductivity in Alkali Halides - 01 January 1988

STP18779S: Effect of Molecular Fluorine on the Performance of Excimer Laser Optics - 01 January 1988

STP18730S: Laser Damage Studies of Several Acrylic Polymers - 01 January 1988

STP18544S: Thresholds for and Time Dependence of UV-Photon-Induced Desorption of Lithium Atoms from Lithium-Fluoride Single Crystals - 01 January 1988

STP18532S: Development of Silicophosphate Glass HAP-3 - 01 January 1988

STP18546S: The Effect of Impurities on U.V. Damage in CaF2 - 01 January 1988

STP18547S: Effect of Cleaning on the Optical Absorption of Calcium Fluoride and Fused Silica at 351 nm - 01 January 1988

STP18551S: Optical Damage in Epoxy Polymers by Millisecond Light Pulses - 01 January 1988

STP18552S: Variations with Laser Pulse Duration of the Thresholds at 350-nm and 1064-nm for Bulk Damage in Crystals of KDP - 01 January 1988

STP18556S: End-Group Effects on the Wavelength Dependence of Laser-Induced Photodegradation in Bisphenol-A Polycarbonate - 01 January 1988

STP18534S: Mass Spectrometric Studies of Laser Damage in Calcium Fluoride - 01 January 1988

STP18535S: CaF2: An ESCA Study - 01 January 1988

STP24408S: Recent Progress in Understanding Fundamental Mechanisms of Laser Induced Damage in Optical Polymers - 01 January 1988

STP24424S: Laser Induced Desorption and Second Harmonic Generation from the (111) Surface of Barium Fluoride - 01 January 1988

STP24400S: Solubility of Pt in Nd Phosphate Laser Glass - 01 January 1988

STP24402S: Laser Damage on Zinc Selenide and Cadmium Telluride Using the Stanford Mark III Infrared Free Electron Laser - 01 January 1988

STP24458S: Intrinsic Optical Damage in Potassium Bromide at 532 nm - 01 January 1988

STP24460S: The Laser Damage Mechanism for NaCl and KBr at 532 nm — Theoretical Predictions and Experimental Tests - 01 January 1988

STP24407S: Ultrafast Imaging of Optical Damage in PMMA - 01 January 1988

STP44880S: Determining Nonpoint-Source Contamination by Agricultural Chemicals in an Unconfined Aquifer, Dade County, Florida: Procedures and Preliminary Results - 01 January 1988

STP26176S: Evaluation of Rodent Bait Station Use Under Controlled Conditions - 01 January 1988

STP26177S: Evaluating Rodenticide Use Impacts on Agricultural Production - 01 January 1988

STP26178S: Metallic Flake Particle Markers for Determining the Feeding Behavior of Rats at Bait Points - 01 January 1988

STP26179S: Tetracyclines as Fluorescent Bone Markers in Cotton and Roof Rats - 01 January 1988

STP26180S: Retention of Physiological Marks by Coyotes Ingesting Baits Containing Iophenoxic Acid, Mirex, and Rhodamine B - 01 January 1988

STP26182S: A Methodology for Identifying Sources of Indirect Costs of Predation Control: A Study of Wyoming Sheep Producers - 01 January 1988

STP26169S: Evaluation of Repellent Seed Treatments and Effects on Early Corn Performance - 01 January 1988

STP26166S: Key Word Standardization in Vertebrate Pest Control - 01 January 1988

STP26170S: A Test Method That Evaluates Avian Perch Repellents - 01 January 1988

STP26172S: Procedures for Assessing Secondary Poisoning Hazards of Rodenticides to Owls - 01 January 1988

STP26173S: Levels of Strychnine in Poisoned Ground Squirrel Stomachs - 01 January 1988

STP26174S: Correlation of Two Census Methods (Food Consumption and Gnawing Evidence) for Assessing Norway Rat Populations - 01 January 1988

STP26175S: Efficacy Determinations of Rodenticide Use and Trapping for Reduction of Coconut Loss in the Philippines - 01 January 1988

STP30335S: A Comparison of Pure Mode I and Mixed Mode I–III Cracking of an Adhesive Containing an Open Knit Cloth Carrier - 01 January 1988

STP30341S: Stress Analysis Concepts for Adhesive Bonding of Aircraft Primary Structure - 01 January 1988

STP26284S: Dose Response of Skin Absorption in Young and Adult Rats - 01 January 1988

STP26287S: Permeation of Polymeric Materials by Chemicals: A Comparison of 25-mm and 51-mm ASTM Cells - 01 January 1988

STP26297S: Using Dipropyl Sulfide to Test the Leakage of Protective Clothing - 01 January 1988

STP26302S: Decontamination of Chemical Protective Clothing Exhibiting Matrix Release - 01 January 1988

STP26315S: Propellant Handler's Ensemble: A New-Generation SCAPE - 01 January 1988

STP26316S: Kennedy Space Center Maintenance Program for Propellant Handlers Ensembles - 01 January 1988

STP26321S: Evaluation of the Physiological Parameters Associated with the Propellant Handler's Ensemble - 01 January 1988

STP26323S: Factors Influencing Design of Protective Clothing for Pesticide Application - 01 January 1988

STP26324S: Guthion Penetration of Clothing Materials During Mixing and Spraying in Orchards - 01 January 1988

STP26327S: Engineering Controls and Protective Clothing in the Reduction of Pesticide Exposure to Tractor Drivers - 01 January 1988

STP26328S: Mechanisms of Clothing Exposure and Dermal Dosing during Spray Application - 01 January 1988

STP26329S: Pattern of Dermal Deposition Resulting from Mixing/Loading and Ground Application of 2,4-D Dimethylamine Salt - 01 January 1988

STP26330S: Use of Fluorescent Tracers and Video Imaging to Evaluate Chemical Protective Clothing During Pesticide Applications - 01 January 1988

STP26331S: Comparison of a Thermal Test Battery Analysis and Field Assessments of Thermal Comfort of Protective Apparel for Pesticide Application - 01 January 1988

STP26332S: Distribution of Malathion on Gore-Tex Fabric Before and After Sunlight Exposure and Laundering as Determined by Electron Microscopy - 01 January 1988

STP26333S: Development and Validation of a Laboratory Spray System Designed to Contaminate Fabrics with Pesticide Solutions - 01 January 1988

STP26334S: Strategies for Laundering Protective Apparel Fabric Sequentially Contaminated with Methyl Parathion - 01 January 1988

STP26335S: Dispersion Mechanism of a Pesticide Chemical in Woven Fabric Structures - 01 January 1988

STP26336S: Effect of Temperature and Humidity on Laboratory Pesticide Penetration Studies - 01 January 1988

STP26337S: Chlorpyrifos Residue Removal from Protective Apparel Through Solvent-Based Refurbishment Procedures - 01 January 1988

STP26338S: Chlorpyrifos Residues in Protective Apparel Fabrics Following Commercial or Consumer Refurbishment - 01 January 1988

STP26339S: Effect of Formulation on Removal of Carbaryl and Chlorothalonil from Apparel Fabrics by Dry Cleaning, Aqueous Extraction, and Vaporization - 01 January 1988

STP26340S: Test Method Development and Evaluation of Protective Clothing Items Used in Agricultural Pesticide Operations - 01 January 1988

STP26341S: Use of Methylene Blue Dye to Predict Fabric Penetration by Malathion - 01 January 1988

STP26342S: Quantitation of Pesticides on Apparel Fabrics - 01 January 1988

STP26343S: Impact of Labor Protection in the Registration Process of Pesticides in the Netherlands - 01 January 1988

STP26344S: Pesticide Applicator Exposure Monitoring: EPA Guidelines - 01 January 1988

STP26345S: Progress in the Development of a Generic Data Base for Mixer/Loader-Applicator Exposures - 01 January 1988

STP26347S: Pesticide Information and Attitudes Toward Chemical Protective Clothing Among Urban Pesticide Users - 01 January 1988

STP26348S: A Review of the Requirements for Protective Clothing for Agricultural Workers in Hot Climates - 01 January 1988

STP26349S: Protective Clothing and Equipment: Beliefs and Behavior of Pesticide Users in Ecuador - 01 January 1988

STP26788S: Fracture Toughness Testing of Polyethylene Pipe Materials - 01 January 1988

STP26789S: Nonlinear Fracture of Concrete and Ceramics - 01 January 1988

STP26389S: Structural Silicone Sealants Used to Adhere Stone Panels on Exterior Building Facades - 01 January 1988

STP26410S: From Wood to Coal: A Compositional Thermogravimetric Analysis - 01 January 1988

STP26400S: Compositional Analysis of Light-Duty Motor Bearings in Fuel Pumps - 01 January 1988

STP26419S: PCBs: The Beginning, the Muddle, the End? - 01 January 1988

STP23166S: Application of Computerized Quantitative Infrared Spectroscopy to the Determination of the Principal Lipids Found in Blood Serum - 01 January 1987

STP934-EB: Computerized Quantitative Infrared Analysis - 01 January 1987

STP23167S: Application of Target Factor Analysis to Quantitative Absorption Spectroscopy - 01 January 1987

STP23168S: Computerized Infrared: The Need for Caution - 01 January 1987

STP23162S: Some Applications of Computer-Assisted Quantitative Infrared Spectroscopy - 01 January 1987

STP23163S: Novel Quantitative Polymer Analysis Through Computerized Infrared Spectroscopy - 01 January 1987

STP23161S: Multicomponent Calibration and Quantitation Methods - 01 January 1987

STP23164S: Methods to Include Beer's Law Nonlinearities in Quantitative Spectral Analysis - 01 January 1987

STP23165S: Quantitative Fourier Transform Infrared Methods for Real Complex Samples - 01 January 1987

STP24374S: Interlaminar Fracture Toughness and Real-Time Fracture Mechanism of Some Toughened Graphite/Epoxy Composites - 01 January 1987

STP937-EB: Toughened Composites - 01 January 1987

STP24375S: Fractographic Analysis of Interlaminar Fracture - 01 January 1987

STP24376S: Effect of Fiber Coatings on Interlaminar Fracture Toughness of Composites - 01 January 1987

STP24377S: Surface Energy Measurements of Graphite and Glass Filaments - 01 January 1987

STP24378S: Axisymmetric Stress Distribution Around an Isolated Fiber Fragment - 01 January 1987

STP24379S: Comparisons of Various Configurations of the Edge Delamination Test for Interlaminar Fracture Toughness - 01 January 1987

STP24380S: The Characterization of Edge Delamination Growth in Laminates Under Fatigue Loading - 01 January 1987

STP24369S: Damage Tolerance of Toughened Resin Graphite Composites - 01 January 1987

STP24381S: Frequency and Load Ratio Effects on Critical Strain Energy Release Rate Gc Thresholds of Graphite/Epoxy Composites - 01 January 1987

STP24382S: Rate Effects on Delamination Fracture Toughness of a Toughened Graphite/Epoxy - 01 January 1987

STP24383S: The Effect of Matrix Toughness on Delamination: Static and Fatigue Fracture Under Mode II Shear Loading of Graphite Fiber Composites - 01 January 1987

STP24384S: Influence of the Resin on Interlaminar Mixed-Mode Fracture - 01 January 1987

STP24385S: Ryton®-PPS Carbon Fiber Reinforced Composites: The How, When, and Why of Molding - 01 January 1987

STP24386S: The Development of Residual Thermal Stresses in Amorphous and Semicrystalline Thermoplastic Matrix Composites - 01 January 1987

STP24387S: Mechanical Properties and Morphology of Poly(etheretherketone) - 01 January 1987

STP24388S: Delamination Behavior of Carbon Fiber/Poly(etheretherketone) (PEEK) Composites - 01 January 1987

STP24370S: The Effect of Resin Toughness and Modulus on Compressive Failure Modes of Quasi-Isotropic Graphite/Epoxy Laminates - 01 January 1987

STP24389S: Modifying Matrix Materials for Tougher Composites - 01 January 1987

STP24390S: Structural Property Improvements Through Hybridized Composites - 01 January 1987

STP24391S: A New Generation of Epoxy Composites for Primary Structural Applications: Materials and Mechanics - 01 January 1987

STP24393S: A Dicyanate Semi-Interpenetrating Polymer Network (SIPN) Matrix Composite - 01 January 1987

STP24371S: A Comparison of Several Mechanical Tests Used to Evaluate the Toughness of Composites - 01 January 1987

STP24372S: Matrix Resin Effects in Composite Delamination: Mode I Fracture Aspects - 01 January 1987

STP24373S: Micromechanisms of Fracture in Toughened Graphite-Epoxy Laminates - 01 January 1987

STP24368S: Toughened Composites Selection Criteria - 01 January 1987

STP25616S: Fracture Characteristics of Angleplied Laminates Fabricated from Overaged Graphite/Epoxy Prepreg - 01 January 1987

STP25617S: A Fractographic Investigation of the Influence of Stacking Sequence on the Strength of Notched Laminated Composites - 01 January 1987

STP25619S: Determination of Crack Propagation Directions in Graphite/Epoxy Structures - 01 January 1987

STP25620S: Microstructural Aspects of Crack Propagation in Filled Polymers - 01 January 1987

STP25621S: A Fractographic Study of Damage Mechanisms in Short-Fiber Metal Matrix Composites - 01 January 1987

STP25622S: Fracture Surfaces of Irradiated Composites - 01 January 1987

STP25623S: Characterization of Impact Damage Development in Graphite/Epoxy Laminates - 01 January 1987

STP25624S: Fractographic Feature Identification and Characterization by Digital Imaging Analysis - 01 January 1987

STP25614S: SEM Fractography of Pure and Mixed-Mode Interlaminar Fractures in Graphite/Epoxy Composites - 01 January 1987

STP25615S: Correlations Between Micromechanical Failure Processes and the Delamination Toughness of Graphite/Epoxy Systems - 01 January 1987

STP949-EB: The Design, Sample Handling, and Applications of Infrared Microscopes - 01 January 1987

STP19436S: Photometric Considerations in the Design and Use of Infrared Microscope Accessories - 01 January 1987

STP19437S: Fourier Transform Infrared Microspectrophotometry as a Failure Analysis Tool - 01 January 1987

STP19438S: Specimen Preparation for Microinfrared Analysis - 01 January 1987

STP19435S: Infrared Microscopy: A Single-Fiber Technique - 01 January 1987

STP19443S: Industrial Problem Solving by Microscopic Fourier Transform Infrared Spectrophotometry - 01 January 1987

STP23152S: A Case Study: Lime—A Hazardous Waste Stabilization Agent - 01 January 1987

STP23154S: Carbonation of Calcium and Magnesium Oxides - 01 January 1987

STP24392S: Screening of Advanced Matrix Resin Systems for Use in High Performance Aircraft - 01 January 1987

STP19401S: Optimizing Physical Properties of Diluent Oils for Maximum Target Deposition of Ultralow-Volume Spray Droplets Under Laboratory Conditions - 01 January 1987

STP943-EB: Pesticide Formulations and Application Systems: Sixth Volume - 01 January 1987

STP19402S: Insecticide Spray Measurements Using Hot-Wire Technology - 01 January 1987

STP19403S: Agricultural Formulation Stability Studies Using a Personal Computer - 01 January 1987

STP19406S: Mineral Carriers for Pesticides—Their Characteristics and Uses - 01 January 1987

STP19407S: Use of Gelling Clays to Stabilize Agricultural Pesticide Suspensions and Emulsions in Aqueous Systems - 01 January 1987

STP19392S: Introduction - 01 January 1987

STP19394S: Nonionic Surfactants as Associative Thickeners in Aqueous Flowable Pesticide Formulations - 01 January 1987

STP19395S: Selection of Wetting Adjuvants - 01 January 1987

STP19396S: Pesticide Concentrated Emulsion Formulations - 01 January 1987

STP19397S: Formulation of Highly Active Cobra Postemergent Herbicide - 01 January 1987

STP19393S: The Relative Phytotoxicity of Selected Hydrocarbon and Oxygenated Solvents and Oils - 01 January 1987

STP19398S: Intermolecular Interactions in Aqueous Pesticide Formulations from Viscosity-Temperature, Viscosity-Volatility, and Viscosity-Shear Rate Relationships - 01 January 1987

STP948-EB: Fractography of Modern Engineering Materials: Composites and Metals - 01 January 1987

STP25613S: Fracture Surface Micromorphology in Engineering Solids - 01 January 1987

STP19439S: Instrumental and Sampling Factors in Infrared Microspectroscopy - 01 January 1987

STP19440S: Considerations for Fiber Sampling with Infrared Microspectroscopy - 01 January 1987

STP19441S: Applications of Microscopic Fourier Transform Infrared Spectrophotometry Sampling Techniques for the Analysis of Polymer Systems - 01 January 1987

STP19442S: Applications of Recent Developments in Fourier Transform Infrared Spectroscopic Microsampling Techniques to Polymeric Materials - 01 January 1987

STP25246S: Comparison of Porous and Nonporous hydroxyapatite and Anorganic Xenografts in the Restoration of Alveolar Ridges - 01 January 1987

STP25248S: Development of Tricalcium Phosphate Ceramic Cements - 01 January 1987

STP25249S: Resorbable Porous Aluminum-Calcium-Phosphorus Oxide (ALCAP) Ceramics - 01 January 1987

STP28177S: A Sugar Dust Explosion and Some Measures to Limit Its Consequences - 01 January 1987

STP25884S: Effect of Application Rate on Droplet Size Spectra and Deposit Characteristics of Dimilin® Spray Mixtures in an Aerial Spray Trial - 01 January 1987

STP968-EB: Pesticide Formulations and Application Systems: Seventh Volume - 01 January 1987

STP25885S: Characteristics of an Electrostatically Charged Air-Atomized Spray for Pesticide Application - 01 January 1987

STP25886S: Economical Pesticide Application: The Reasons for Controlled Droplet Application - 01 January 1987

STP25887S: Role of Formulation Ingredients and Physical Properties on Droplet Size Spectra, Deposition, and Persistence of Aerially Sprayed Aminocarb and Mexacarbate in Forest Litter and Soil Samples - 01 January 1987

STP25872S: Introduction to Session on Closed Mixing, Handling, and Application Systems - 01 January 1987

STP25888S: Sources of Error in Estimating Efficacy of a Microbial Pesticide Against Aquatic Pests - 01 January 1987

STP25889S: Method for Determining Spray Penetration into Carpet - 01 January 1987

STP25873S: Principles of Closed Systems for Handling of Agricultural Pesticides - 01 January 1987

STP25890S: Unique Methods of Herbicide Application - 01 January 1987

STP25891S: Dry Application of Water-Dispersible Granules: A Three-Year Update - 01 January 1987

STP25892S: Herbicidal Root Control in Sewer Lines Requires Unique Application Techniques - 01 January 1987

STP25893S: A New Pediculicide Application System for Human Mass Delousing: Analysis of Operational Characteristics and Limitations - 01 January 1987

STP25894S: Production of Granular Products by Roll Compaction - 01 January 1987

STP25895S: Comparison of Results from ASTM Steel Ball Test (E 728) and Attrition in a Granular Applicator - 01 January 1987

STP25896S: Registration Considerations for Pesticide Formulations - 01 January 1987

STP25874S: Closed System Acceptance and Use in California - 01 January 1987

STP25875S: Development of Devices Designed to Increase Safety During Field Handling of Pesticides - 01 January 1987

STP25876S: The Universal Closed System for Liquids - 01 January 1987

STP25877S: Risk Reduction Through Use of Closed Systems: An Attainable Goal? - 01 January 1987

STP25878S: Farm Chemical Handling, Mixing, and Loading: Worker Safety and Environmental Concerns - 01 January 1987

STP25871S: ASTM Committee E-35 on Pesticides: Past, Present, and Future - 01 January 1987

STP25879S: Nonionic Emulsifier Selection for Liquid Formulations to Obtain Compatibility with Solid Formulations - 01 January 1987

STP25880S: Methyl Esters of Fatty Acids as Pesticide Formulation and Application Aids - 01 January 1987

STP25881S: Development of SCEPTER® 1.5 ASU Formulation by Evaluation of Liquid Handling Properties - 01 January 1987

STP25882S: A System for Examination of the Pesticide Dose Transfer Process - 01 January 1987

STP25883S: Spray Drift Deposits from Low Volume Application Using Oil and Water Carriers - 01 January 1987

STP35344S: Effect of Stress Biaxiality on the Transverse Tensile Strain-to-Failure of Composites - 01 January 1986

STP893-EB: Composite Materials: Testing and Design (Seventh Conference) - 01 January 1986

STP35345S: Compression Failure Mechanisms in Unidirectional Composites - 01 January 1986

STP35346S: Fractographic and Microstructural Examination of Compression Failures in Wet Compression Graphite/Epoxy Coupons - 01 January 1986

STP35347S: Notch Sensitivity and Stacking Sequence of Laminated Composites - 01 January 1986

STP35348S: Effect of Laminate Thickness and Specimen Configuration on the Fracture of Laminated Composites - 01 January 1986

STP35349S: Effect of Impact and Fatigue Loads on the Strength of Graphite/Epoxy Composites - 01 January 1986

STP35350S: Bond Thickness Effect in Adhesive Joints and Its Significance for Mode I Interlaminar Fracture of Composites - 01 January 1986

STP35351S: Design Analysis and Testing for Mixed-Mode and Mode II Interlaminar Fracture of Composites - 01 January 1986

STP35352S: Delamination Resistant Composite Concepts - 01 January 1986

STP35353S: Improvement of Edge Delamination Strength of Composite Laminates Using Adhesive Layers - 01 January 1986

STP35354S: Delamination of Composite Laminates Stimulated by Interlaminar Shear - 01 January 1986

STP35355S: Analysis of Delamination Propagation in the Composite Layer of Metal-to-Composite Stepped-Lap Joints - 01 January 1986

STP35356S: Characterization of Mode I and Mixed-Mode Failure of Adhesive Bonds Between Composite Adherends - 01 January 1986

STP35357S: Monitoring Damage Progression in Center-Notched Boron/Aluminum Laminates Through Acoustic Emission - 01 January 1986

STP35340S: Bolted Composite Repairs Subjected to Biaxial or Shear Loads - 01 January 1986

STP35358S: Dynamic Stress Analysis of Smooth and Notched Fiber Composite Flexural Specimens - 01 January 1986

STP35359S: Tensile Strength and Modulus of a Three-Dimensional Braid Composite - 01 January 1986

STP35341S: Characterization of T300/V-378A Graphite/Bismaleimide for Structural Applications - 01 January 1986

STP35342S: Development of Test and Analysis Methods for Thick-Wall, Graphite/Epoxy Filament-Wound Composite Materials Fracture Toughness - 01 January 1986

STP35343S: Modified Mircodebonding Test for Direct In Situ Fiber/Matrix Bond Strength Determination in Fiber Composites - 01 January 1986

STP17391S: Resistance Curve Approach to Composite Materials Characterization - 01 January 1986

STP17392S: A Comparison of the Fracture Behavior of Thick Laminated Composites Utilizing Compact Tension, Three-Point Bend, and Center-Cracked Tension Specimens - 01 January 1986

STP17424S: Dynamic Crack Propagation and Branching under Biaxial Loading - 01 January 1986

STP17390S: Effect of Loading Rate on Dynamic Fracture of Reaction Bonded Silicon Nitride - 01 January 1986

STP19982S: Fracture of Thick Graphite/Epoxy Laminates with Part-Through Surface Flaws - 01 January 1986

STP907-EB: Composite Materials: Fatigue and Fracture - 01 January 1986

STP19983S: Failure Analysis of a Graphite/Epoxy Laminate Subjected to Bolt-Bearing Loads - 01 January 1986

STP19984S: Damage Mechanics Analysis of Matrix Effects in Notched Laminates - 01 January 1986

STP19985S: Fatigue Behavior of Continuous-Fiber Silicon Carbide/Aluminum Composites - 01 January 1986

STP19986S: Delamination Arrester—An Adhesive Inner Layer in Laminated Composites - 01 January 1986

STP19987S: Fatigue Damage in Notched Pultruded Composite Rods - 01 January 1986

STP19988S: Fatigue Failure Mechanisms in Unidirectional Composites - 01 January 1986

STP19989S: Internal Load Distribution Effects During Fatigue Loading of Composite Laminates - 01 January 1986

STP19990S: On the Interrelationship Between Fiber Fracture and Ply Cracking in Graphite/Epoxy Laminates - 01 January 1986

STP19991S: Damage Mechanisms and Accumulation in Graphite/Epoxy Laminates - 01 January 1986

STP19992S: A Critical-Element Model of the Residual Strength and Life of Fatigue-Loaded Composite Coupons - 01 January 1986

STP19993S: Response of Thick, Notched Laminates Subjected to Tension-Compression Cyclic Loads - 01 January 1986

STP19978S: Influence of Mold Coverage upon the Notch Strength of R25 Sheet Molding Compounds - 01 January 1986

STP19994S: Effect of Ply Thickness on Longitudinal Splitting and Delamination in Graphite/Epoxy Under Compressive Cyclic Load - 01 January 1986

STP19995S: Influence of Sublaminate Cracks on the Tension Fatigue Behavior of a Graphite/Epoxy Laminate - 01 January 1986

STP19979S: Interface Studies of Aluminum Metal Matrix Composites - 01 January 1986

STP19977S: Dynamic Delamination Crack Propagation in a Graphite/Epoxy Laminate - 01 January 1986

STP19980S: Probabilistic Fracture Kinetics of “Natural” Composites - 01 January 1986

STP19981S: Constrained 90-Deg Ply Cracking in 0/90/0 and ±45/90/∓45 CFRP Laminates - 01 January 1986

STP29063S: Strength and Lifetime of Bolted Laminates - 01 January 1986

STP936-EB: Instrumented Impact Testing of Plastics and Composite Materials - 01 January 1986

STP19377S: Testing, Simulation, and Interpretation of Materials Impact Characteristics - 01 January 1986

STP19378S: Experimental Comparison of Several Impact Test Methods - 01 January 1986

STP19379S: Variable-Rate Impact Testing of Polymeric Materials—A Review - 01 January 1986

STP19380S: Prediction of End-Use Impact Resistance of Composites - 01 January 1986

STP19381S: Instrumented Impact Testing of Aramid-Reinforced Composite Materials - 01 January 1986

STP19382S: Effects of Test Rate and Temperature on Fracture Behavior of Some Rubber-Modified Polymers - 01 January 1986

STP19383S: Impact Characterization of New Composite Materials - 01 January 1986

STP19384S: Flexed-Plate Impact Testing of Polyether Sulphone: Development of a Notched Specimen - 01 January 1986

STP19385S: Impact Fatigue of Polymers Using an Instrumented Drop Tower Device - 01 January 1986

STP19386S: Impact Response of Polymeric Materials at Varying Depths of Penetration - 01 January 1986

STP19387S: Assessment of Impact Characteristics for Incipient Crack Formation in Polymeric Materials - 01 January 1986

STP19388S: Analysis of Force and Energy Measurements in Impact Testing - 01 January 1986

STP19389S: Effect of Loading Rate on the Impact Fracture Toughness of Acetal and Polymethyl Methacrylate - 01 January 1986

STP19374S: Evaluation of a Variable-Speed Impact Tester for Analysis of Impact Behavior of Plastics and Composites - 01 January 1986

STP19371S: Instrumented Impact Test Data Interpretation - 01 January 1986

STP18307S: Terra Theraic and Magnesium Oxide with Induced Defects as Additives on Concrete for the Protection of Rebars - 01 January 1986

STP18301S: Application of a Polymeric Anodemesh for Cathodic Protection to a Reinforced Concrete Structure - 01 January 1986

STP18302S: The Determination of the Corrosion Rate of Steel Embedded in Concrete by the Polarization Resistance and AC Impedance Methods - 01 January 1986

STP18304S: The Use of Anodic Polarization to Determine the Effectiveness of Calcium Nitrite as an Anodic Inhibitor - 01 January 1986

STP887-EB: Engine Coolant Testing: Second Symposium - 01 January 1986

STP32978S: Solder Bloom Corrosion Analysis Based on Field Survey Data, Potential Causes, and Resolution - 01 January 1986

STP32979S: Dynamic Testing of Soldered Joints in Engine Coolants - 01 January 1986

STP32980S: Testing of Engine Coolant Inhibitors by an Electrochemical Method in the Laboratory and in Vehicles - 01 January 1986

STP32981S: European Test Methods for Automotive Coolants: Experience Gained in Recent Cavitation and Corrosion Tests - 01 January 1986

STP32982S: Test Methods for the Development of Supplemental Additives for Heavy-Duty Diesel Engine Coolants - 01 January 1986

STP32984S: A Review of Factors Influencing Coolant-Metal Interfaces in Engines - 01 January 1986

STP32985S: Observations on Aluminum Water Pump Cavitation Tests - 01 January 1986

STP32986S: U.S. Army Antifreeze after 50 Years - 01 January 1986

STP32987S: Corrosion Behavior Diagram of Aluminum 319 Alloy in Automotive Coolants - 01 January 1986

STP32970S: Maintaining Scale and Sludge in Suspension in Automotive Cooling Systems - 01 January 1986

STP32973S: A Demonstration of Aluminum Transport Deposition - 01 January 1986

STP32974S: Propylene Glycol, A New Base Fluid for Automotive Coolants - 01 January 1986

STP32975S: Additive Package for Used Antifreeze - 01 January 1986

STP32976S: Inhibitors and Coolant Corrosivity - 01 January 1986

STP32977S: Evalution of Engine Coolants by Electrochemical Methods - 01 January 1986

STP35360S: Elastic Stiffness of Three-Dimensional Braided Textile Structural Composites - 01 January 1986

STP35361S: Fabrication and Mechanical Properties of Multidimensionally (X-D) Braided Composite Materials - 01 January 1986

STP35339S: Effect of Manufacturing Defects and Service-Induced Damage on the Strength of Aircraft Composite Structures - 01 January 1986

STP33287S: Porosity Testing of Polyester Vascular Grafts - 01 January 1986

STP33277S: Dacron® Arterial Grafts: Comparative Structures and Basis for Successful Use of Current Prostheses - 01 January 1986

STP33278S: Expanded Polytetrafluoroethylene (PTFE) Arterial Grafts: An Eight-Year Experience - 01 January 1986

STP33279S: Endothelial Cell Seeded Synthetic Vascular Grafts - 01 January 1986

STP33281S: Lower Extremity Revascularization with the Glutaraldehyde Stabilized Human Umbilical Cord Vein Graft - 01 January 1986

STP33283S: Fabrication and Testing of Polyester Arterial Grafts - 01 January 1986

STP33284S: Physical Properties and Test Methods for Expanded Polytetrafluoroethylene (PTFE) Grafts - 01 January 1986

STP17307S: California Pesticide Applicators' Attitudes and Practices Regarding the Use and Care of Protective Clothing - 01 January 1986

STP17308S: Effectiveness of Selected Work Fabrics as Barriers to Pesticide Penetration - 01 January 1986

STP17309S: Efficiency of Protective Clothing for Pesticide Spraying - 01 January 1986

STP17310S: Fabric Parameters and Pesticide Characteristics That Impact on Dermal Exposure of Applicators - 01 January 1986

STP17311S: Effects of Barrier Finishes on Aerosol Spray Penetration and Comfort of Woven and Disposable Nonwoven Fabrics for Protective Clothing - 01 January 1986

STP17312S: Effect of Laundering Procedures and Functional Finishes on Removal of Insecticides Selected from Three Chemical Classes - 01 January 1986

STP17313S: Effect of Functional Finish Barriers on Pesticide Penetration - 01 January 1986

STP17314S: Distribution of Malathion and Methyl Parathion on Cotton/Polyester Unfinished and Durable-Press Fabrics Before and After Laundering as Determined by Electron Microscopy - 01 January 1986

STP17316S: Bioassay for Testing Protective Glove Performance Against Skin Absorption of Organic Solvents - 01 January 1986

STP17317S: Permeation of Chemicals Through the Skin - 01 January 1986

STP17299S: A Proposed Basis for Characterizing and Comparing the Permeation Resistance of Chemical Protective Clothing Materials - 01 January 1986

STP17297S: Comparison of Two Methods Used to Measure Permeation of Glove Materials by a Complex Organic Mixture - 01 January 1986

STP17306S: Protective Clothing and the Agricultural Worker - 01 January 1986

STP17372S: Best Possible Heat Treatment of Steel SA 336 F22 for the Production of Forged Shells with Heavy Walls - 01 January 1986

STP17451S: Electrochemical Techniques for Monitoring Corrosion Rates in Simulated Kraft White Liquors - 01 January 1986

STP17453S: Techniques for the Evaluation of Cooling Water Corrosion and Scale Inhibitors in the Laboratory and at the Industrial Plant Site - 01 January 1986

STP19320S: Quantitative Low-Tech Measurement of Fluid Nonvolatile Residue - 01 January 1986

STP912-EB: Current Technologies in Flexible Packaging - 01 January 1986

STP18323S: Polycarbonate Coextrusions for Barrier Flexible Packaging - 01 January 1986

STP18321S: Merits of Metallized Film Constructions - 01 January 1986

STP18324S: Removal of Hydrogen Peroxide from Flat Packaging Material Used in Aseptic Packaging of Food - 01 January 1986

STP18325S: Inactivation of Microorganisms on Polyethylene Exposed to Hydrogen Peroxide Vapors in Air at Various Temperatures - 01 January 1986

STP18326S: Isostatic and Quasi-Isostatic Methods for Determining the Permeability of Organic Vapors Through Barrier Membranes - 01 January 1986

STP18327S: High-Performance Liquid Chromatography and Its Application to Flexible Packaging Materials - 01 January 1986

STP18322S: High-Barrier Flexible Polyvinylidene Chloride Composite Applications - 01 January 1986

STP18328S: Use of Differential Scanning Calorimetry in Developing and Applying Films for Flexible Packaging - 01 January 1986

STP18329S: Coating EPA-complying Waterborne and 100% Solid Flexible Laminating Adhesives - 01 January 1986

STP18345S: A Colorimetric Determination of Dye Content on 100% Polyester Fabrics - 01 January 1986

STP18363S: Theoretical Constraints and Precautions Using Light Scattering to Measure Drop Size Distributions - 01 January 1986

STP915-EB: Pesticide Formulations and Application Systems: Fifth Volume - 01 January 1986

STP18364S: Development of Instrumentation for Spray Drop Size Research - 01 January 1986

STP18365S: Laser Droplet Interferometry Approach to Spray Drop Size Analysis - 01 January 1986

STP18366S: Practical Applications of the Particle Measuring Systems Two-Dimensional Imaging Spectrometer - 01 January 1986

STP18367S: Practical Use of the PMS Spray Analyzer for Pesticide Application Research - 01 January 1986

STP18354S: A Device for the Controlled Production and Placement of Individual Droplets - 01 January 1986

STP18368S: Use of a Laser Imaging System for Agricultural Spray Analysis - 01 January 1986

STP18355S: Effect of Droplet and Formulation Parameters on Pest Control Efficiency - 01 January 1986

STP18356S: Direct Metering of Pesticide Concentrations - 01 January 1986

STP18357S: Understanding Volatilities of Forestry Spray Mixtures from Their Viscosities and Viscosity-Temperature Relationships - 01 January 1986

STP18353S: Functional Formulation for Prescription Performance - 01 January 1986

STP18358S: Electrostatic Spraying of Oil-Based Agricultural Products - 01 January 1986

STP18359S: Evaluation of Water Soluble Polymers as Co-Suspending Agents for Flowable Pesticides - 01 January 1986

STP18360S: Session Introduction: Use of Spray Drop Size Analyzers - 01 January 1986

STP18361S: Development of Drop Size-Frequency Analysis of Sprays Used for Pesticide Application - 01 January 1986

STP18362S: Progress in Droplet Sizing Instruments and Procedures - 01 January 1986

STP23055S: Evaluation of Simple Generic Aquatic Ecosystem Tests to Screen the Ecological Impacts of Pesticides - 01 January 1986

STP23062S: Use of Limnocorrals in Evaluating the Effects of Pesticides on Zooplankton Communities - 01 January 1986

STP18461S: Alkali-Silica Reactivity: Effect of Alkali in Aggregate on Expansion - 01 January 1986

STP930-EB: Alkalies In Concrete - 01 January 1986

STP18462S: Influence of Cement Alkali Distribution on Expansion Due to Alkali-Silica Reaction - 01 January 1986

STP18463S: Correlating Water-Soluble Alkalies to Total Alkalies in Cement—Considerations for Preventing Alkali-Silica Poputs on Slabs - 01 January 1986

STP18464S: Recent Developments in the Use of Fly Ash to Reduce Alkali-Aggregate Reaction - 01 January 1986

STP18460S: Opportunities with Alkalies in Concrete Testing, Research, and Engineering Practice - 01 January 1986

STP18465S: Influence of Alkali-Silica Reaction on the Engineering Properties of Concrete - 01 January 1986

STP19376S: Impact Measurements of Low-Pressure Thermoplastic Structural Foam - 01 January 1986

STP19372S: Methodology for Selecting Impact Tests of Composite Materials in Automotive Applications - 01 January 1986

STP19373S: Instrumented Dart Impact Evaluation of Some Automotive Plastics and Composites - 01 January 1986

STP19375S: Digital Filtering of Impact Data - 01 January 1986

STP23105S: Laser Damage Studies of Several Methacrylate Polymeric Materials - 01 January 1986

STP36216S: Multiaxial Fatigue Testing Machine for Polymers - 01 January 1985

STP36233S: A Review of the Multiaxial Fatigue Testing of Fiber Reinforced Plastics - 01 January 1985

STP36234S: Biaxial Fatigue of Glass Fiber Reinforced Polyester Resin - 01 January 1985

STP36235S: Effect of Biaxial Loads on the Static and Fatigue Properties of Composite Materials - 01 January 1985

STP32753S: Fiberglass Epoxy Laminate Fatigue Properties at 300 and 20 K - 01 January 1985

STP32775S: Summary - 01 January 1985

STP863-EB: Advances in Luminescence Spectroscopy - 01 January 1985

STP32768S: Analytical Applications of Proton-Transfer Spectroscopy. Detection of Trace Hydrogen-Bonding Impurities in Hydrocarbon Solvents Using 3-Hydroxyflavone as a Fluorescence Probe - 01 January 1985

STP32769S: Global and Nonglobal Rotations in Proteins Detected by Fluorescence Polarization - 01 January 1985

STP32770S: Comparison of Techniques for Generating Room Temperature Phosphorescence in Fluid Solution - 01 January 1985

STP32771S: Some Photoacoustic Studies of Consequence in Luminescence Spectroscopy - 01 January 1985

STP32767S: Spectroscopic Probing of Solvation Interactions - 01 January 1985

STP32772S: Metal Ion Sensors Based on Immobilized Fluorogenic Ligands - 01 January 1985

STP32773S: Synchronous-Excitation Fluorescence Applied to Characterization of Phenolic Species - 01 January 1985

STP32774S: A Concise Feature Set for the Pattern Recognition of Low-Temperature Luminescence Spectra of Hazardous Chemicals - 01 January 1985

STP32785S: Knee Point and Post-Failure Behavior of Some Laminated Composites Subjected to Uniaxial Tension - 01 January 1985

STP864-EB: Recent Advances in Composites in the United States and Japan - 01 January 1985

STP32786S: Fatigue Behavior of Alumina Fiber Reinforced Aluminum Composites - 01 January 1985

STP32787S: An Evaluation of the Effects of Stacking Sequence and Thickness on the Fatigue Life of Quasi-Isotropic Graphite/Epoxy Laminates - 01 January 1985

STP32780S: Effect of Graphite Fiber/Epoxy Matrix Adhesion on Composite Fracture Behavior - 01 January 1985

STP32788S: Fatigue Response of Notched Graphite/Epoxy Laminates - 01 January 1985

STP32789S: Profiles of Fatigue Damage in Graphite/Epoxy Composites from Ultrasonic Transmission Power Spectra - 01 January 1985

STP32790S: Residual Stresses In and Around a Short Fiber in Metal Matrix Composites Due To Temperature Change - 01 January 1985

STP32791S: Finite-Element Analyses of Saint-Venant End Effects for Composite Materials - 01 January 1985

STP32792S: Analysis of Behavior of Fibrous Composite Compression Specimens - 01 January 1985

STP32793S: Effect of End-Tab Design on Tension Specimen Stress Concentrations - 01 January 1985

STP32794S: Stress and Deformation of the Sandwich Panel Having Curved Faceplates Under Pressure Loading - 01 January 1985

STP32781S: Fracture Behavior of SiC Matrix Composites Reinforced with Helical Tantalum Fiber - 01 January 1985

STP32795S: Dynamic Response of Flat Integrally Stiffened Graphite/Epoxy Panels Under Combined Acoustic and Shear Loads - 01 January 1985

STP32796S: Stability of Nonlinear Circumferential Waves in an Accelerated Spinning Rectilinearly Orthotropic Disk - 01 January 1985

STP32797S: Dispersive Wave Propagation in Random Particulate Composites - 01 January 1985

STP32798S: Impact Resistance of Fiber Composites: Energy-Absorbing Mechanisms and Environmental Effects - 01 January 1985

STP32799S: Ferrite-Resin Composite Material for Vibration Damping - 01 January 1985

STP32800S: Finite-Element Analysis of Interlaminar Shear Stress Due to Local Impact - 01 January 1985

STP32801S: Viscoelastic Buckling Analysis of Laminated Composite Columns - 01 January 1985

STP32802S: Design of Laminated Fibrous Composite Plates with Required Flexural Stiffness - 01 January 1985

STP32804S: Developmental Researches on the Lightweight Structure for Future Satellite in the National Development Agency of Japan - 01 January 1985

STP32805S: Structure and Properties of an Integrated 3-D Fabric for Structural Composites - 01 January 1985

STP32806S: Manufacture of Carbon-Carbon Composites by Using Fine Coke and Its Properties - 01 January 1985

STP32782S: First-Ply Failure of Graphite/Epoxy Laminates - 01 January 1985

STP32807S: Fabrication of Silicon Carbide Fiber-Reinforced Aluminum Composites - 01 January 1985

STP32808S: Fabrication and Spin Tests of Thick Laminated S2-Glass Flywheel Disks - 01 January 1985

STP32809S: Toward Process Optimization by Monitoring the Electrical Properties During the Cure Cycle for CFRP - 01 January 1985

STP32810S: Work of Fracture in Metal Matrix Composites - 01 January 1985

STP32811S: Liquid Crystal Film Visualization Approach to Fracture in Composites - 01 January 1985

STP32812S: On the Streamline Specimen for Tension Testing of Composite Materials - 01 January 1985

STP32813S: Design for Ultimate Strength with a Chopped Glass-Filled Phenolic Composite: Critical Flaw Sensitivity, Residual Stress, Fiber Orientation - 01 January 1985

STP32814S: Fiber-Matrix Reaction Zone Growth Kinetics in SiC-Reinforced Ti-6Al-4V as Studied by Transmission Electron Microscopy - 01 January 1985

STP32779S: Load Concentration Factors in a Chain-of-Bundles Probability Model - 01 January 1985

STP32815S: Effects of Vacuum and Temperature on Mechanical Properties of S2-Glass/Epoxy - 01 January 1985

STP32816S: Effect of Coatings on Interfacial Reaction in Tungsten/Nickel and Tungsten/316L Composites - 01 January 1985

STP32783S: Damage Initiation at Curved Free Edges: Application to Uniaxially Loaded Plates Containing Holes and Notches - 01 January 1985

STP32817S: Assessing the Corrosion Resistance of Metal Matrix Composite Materials in Marine Environments - 01 January 1985

STP32818S: Elevated-Temperature Internal Friction in an Oxide Dispersion-Strengthened Nickel-Chromium Alloy - 01 January 1985

STP32819S: Elastic Representation Surfaces of Unidirectional Graphite/Epoxy Composites - 01 January 1985

STP32820S: Shear Modulus of Epoxy Resin Under Compression - 01 January 1985

STP32821S: Thermal Expansion Coefficients of Misoriented Short-Fiber Reinforced Composites - 01 January 1985

STP32822S: On High-Velocity Brittleness and Ductility of Dual-Phase Steel and Some Hybrid Fiber Reinforced Plastics - 01 January 1985

STP33782S: A Corrosiveness Test for Fibrous Insulations - 01 January 1985

STP33783S: Electrochemical Methods for Evaluating Corrosion Inhibitors in Strong Acid Systems - 01 January 1985

STP34271S: Some Three-Dimensional Aspects of Subcritical Flaw Growth as Measured in a Transparent Polymeric Material - 01 January 1985

STP34018S: Hygrothermal Degradation of Sheet Molding Compounds - 01 January 1985

STP34019S: Resin Flow During Autoclave Cure of Graphite-Epoxy Composites - 01 January 1985

STP34020S: Viscoelastic Response of SMC-R50 Under Different Thermomechanical Conditions - 01 January 1985

STP34021S: Using ASTM D 4065-82 for Predicting Processability and Properties - 01 January 1985

STP34012S: Use of X-radiographic Tracers to Measure Fiber Orientation in Short Fiber Composites - 01 January 1985

STP34013S: Fatigue Crack Growth and Lifetime Trends in Injection Molded Reinforced Thermoplastics - 01 January 1985

STP34011S: The Influence of Microstructural Variability upon the Scatter in Mechanical Properties of R25 Sheet Molding Compound - 01 January 1985

STP34014S: Analysis of Flexural Fatigue Damage in Unidirectional Composites - 01 January 1985

STP34015S: Axial Fatigue of SMC-R65 Sheet Molding Compound in Liquid Environments - 01 January 1985

STP34016S: Characterization of Bolted Joint Behavior in SMC-R50 - 01 January 1985

STP34017S: Thermoelastic Response of the Cylindrically Orthotropic Disk — Numerical and Experimental Evaluation - 01 January 1985

STP36302S: Evaluation of Tensile Tests for Adhesive Bonds - 01 January 1985

STP876-EB: Delamination and Debonding of Materials - 01 January 1985

STP36303S: Delamination Crack Growth in Composite Laminates - 01 January 1985

STP36304S: Delamination Growth in a Notched Graphite/Epoxy Laminate Under Compression Fatigue Loading - 01 January 1985

STP36305S: A Fracture Mechanics Approach for Designing Adhesively Bonded Joints - 01 January 1985

STP36306S: Fatigue Thresholds of Delamination Crack Growth in Orthotropic Graphite/Epoxy Laminates - 01 January 1985

STP36307S: Delamination Threshold and Loading Effect in Fiber Glass Epoxy Composite - 01 January 1985

STP36308S: Designing to Minimize Peel Stresses in Adhesive-Bonded Joints - 01 January 1985

STP36309S: Repeatability of Mixed-Mode Adhesive Debonding - 01 January 1985

STP36310S: Analysis of Local Delaminations and Their Influence on Composite Laminate Behavior - 01 January 1985

STP36311S: A Modified Free-Edge Delamination Specimen - 01 January 1985

STP36312S: Characterization of Mode I and Mixed-Mode Delamination Growth in T300/5208 Graphite/Epoxy - 01 January 1985

STP36313S: Effects of Strain Rate on Delamination Fracture Toughness of Graphite/Epoxy - 01 January 1985

STP36314S: Moisture and Temperature Effects on the Mixed-Mode Delamination Fracture of Unidirectional Graphite/Epoxy - 01 January 1985

STP36298S: A Simple Model to Simulate the Interlaminar Stresses Generated Near the Free Edge of a Composite Laminate - 01 January 1985

STP36315S: The Use of Stitching to Suppress Delamination in Laminated Composites - 01 January 1985

STP36316S: Matrix Deformation and Fracture in Graphite-Reinforced Epoxies - 01 January 1985

STP36317S: Fractography and Fracture Criteria of the Delamination Process - 01 January 1985

STP36318S: Role of Delamination and Damage Development on the Strength of Thick Notched Laminates - 01 January 1985

STP36319S: Monitoring Fatigue Damage in CFRP Using Acoustic Emission and Radiographic Techniques - 01 January 1985

STP36320S: Quantification of the “Tapping” Technique for the Detection of Edge Defects in Laminated Plates - 01 January 1985

STP36321S: Thermographic Inspection of Carbon Epoxy Structures - 01 January 1985

STP36299S: A New Ply Model for Interlaminar Stress Analysis - 01 January 1985

STP36297S: A Dynamic Hybrid Finite-Element Analysis for Interfacial Cracks in Composites - 01 January 1985

STP36300S: Analysis of Interlaminar Stresses in Thick Composite Laminates With and Without Edge Delamination - 01 January 1985

STP36301S: Energy Release Rate During Delamination Crack Growth in Notched Composite Laminates - 01 January 1985

STP32954S: Dislocation Aspects of Plastic Flow and Cracking at Indentations in Magnesium Oxide and Cyclotrimethylenetrinitramine Explosive Crystals - 01 January 1985

STP32956S: Use of the Indentation Size Effect on Microhardness for Materials Characterization - 01 January 1985

STP32950S: Indentation of Brittle Materials - 01 January 1985

STP32965S: Knoop Microhardness Testing of Paint Films - 01 January 1985

STP32966S: Summary - 01 January 1985

STP36259S: Effect of Diet on the Sensitivity of Daphnia magna to Linear Alkylbenzene Sulfonate - 01 January 1985

STP33257S: Host Reaction to Silicone Implants: A Long-Term Clinical and Histopathological Study - 01 January 1985

STP33258S: Biodurability Evaluation of Medical-Grade High-Performance Silicone Elastomer - 01 January 1985

STP33259S: Degradation of Polyester Arterial Prostheses: A Physical or Chemical Mechanism? - 01 January 1985

STP33260S: Surface Fissuring of Polyurethanes Following In Vivo Exposure - 01 January 1985

STP33261S: In Vivo Degradation of a Polyurethane: Preclinical Studies - 01 January 1985

STP33262S: Biodegradable Fracture Fixation Plates for Use in Maxillofacial Surgery - 01 January 1985

STP33263S: Degradation and Wear of Ultra-High-Molecular-Weight Polyethylene - 01 January 1985

STP33264S: Tricalcium Phosphate Biodegradable Ceramic - 01 January 1985

STP32784S: Fracture Toughness of Fiber-Polymer Cement Concrete System - 01 January 1985

STP30293S: An Analytical Method and Quality Control Program for Studies of Currently Used Pesticides in Surface Waters - 01 January 1985

STP873-EB: High Modulus Fiber Composites in Ground Transportation and High Volume Applications - 01 January 1985

STP32865S: Low-Volume Applications of Roundup® Herbicide - 01 January 1985

STP875-EB: Pesticide Formulations and Application Systems: Fourth Symposium - 01 January 1985

STP32866S: Evaluation of Plant Growth Regulators - 01 January 1985

STP32867S: Effect of Formulation and Pressure on Spray Distribution Across the Swath with Hydraulic Nozzles - 01 January 1985

STP32868S: The Laboratory for Pest Control Application Technology (LPCAT): A New Interdisciplinary Approach for Solving a Difficult Problem - 01 January 1985

STP32869S: Development of Toxic Baits for Control of Imported Fire Ants - 01 January 1985

STP32870S: Water Dispersible Granule Development Process and Equipment - 01 January 1985

STP32871S: Dry Application of Dry Flowable Formulations - 01 January 1985

STP32856S: Seed Treatment Formulations: Development of a Protocol - 01 January 1985

STP32872S: Determination of the Liquid Holding Capacity (LHC) or Sorptivity of Agricultural Carriers - 01 January 1985

STP32857S: Evaluation of Factors Affecting Tank Mix Compatibility of Pesticide Combinations - 01 January 1985

STP32858S: A Method for Emulsion Optimization Through Computerized Regression Analysis - 01 January 1985

STP32859S: A Small-Scale System to Evaluate Anti-Foam Performance - 01 January 1985

STP32855S: Phosphorus-Based Anionic Surface-Active Agents and Their Role in Agrochemical Formulations - 01 January 1985

STP32860S: Initial Studies on the Effects of Droplet Size and Electrostatics on Spray Deposition Efficiencies - 01 January 1985

STP32861S: Efficacy of Insecticides Applied Ultra-Low Volume in Vegetable Oils - 01 January 1985

STP32862S: Use of Electrostatics, Rotary Atomizers, and Vegetable Oils in Low-Volume Ground Application - 01 January 1985

STP32863S: Control of Spruce Budworm by Ultra-Low-Volume Application of an Insecticide Suspension - 01 January 1985

STP32864S: Injection of Chemicals for Subsurface Drip Irrigated Cotton - 01 January 1985

STP39158S: Recent Experiences with Corrosion Beneath Thermal Insulation in a Chemical Plant - 01 January 1985

STP32964S: Indentation Test for Polymer-Film-Coated Computer Board Substrate - 01 January 1985

STP32952S: Vickers Indentation Curves of Elastoplastic Materials - 01 January 1985

STP33590S: Acute and Chronic Toxicity to the Fathead Minnow, Pimephales promelas, of Effluents from a Treatment Plant Receiving Dye and Pigment Processing Wastewater - 01 January 1985

STP33591S: Physical/Chemical Properties of 2,3,7,8-Tetrachlorodibenzo-p-Dioxin - 01 January 1985

STP33592S: Environmental Mobility of Dioxins - 01 January 1985

STP28962S: Strengthening of Calcium Fluoride - 01 January 1985

STP28957S: Laser Damage in Plastics at the Frank J. Seiler Research Laboratory (FJSRL) - 01 January 1985

STP37107S: Markings on Crack Surfaces of Brittle Materials: A Suggested Unified Nomenclature - 01 January 1984

STP37108S: Fracture Mist Region in a Soda-Lime-Silica Float Glass - 01 January 1984

STP37109S: Fractography of Slow Fracture in Glass - 01 January 1984

STP37110S: Chemical Analysis of Fracture Surfaces - 01 January 1984

STP37111S: Scanning Electron Microscopy Techniques and Their Application to Failure Analysis of Brittle Materials - 01 January 1984

STP37441S: Fractographic Analysis of Biaxial Failure in Ceramics - 01 January 1984

STP37112S: Fractography of Metalized Ceramic Substrates - 01 January 1984

STP37122S: Fractography of Metal Matrix Composites - 01 January 1984

STP37106S: Ceramic Fracture Features, Observations, Mechanisms, and Uses - 01 January 1984

STP32559S: Effects of Specimen Configuration and Frequency on Fatigue Crack Propagation in Nylon 66 - 01 January 1984

STP30200S: Materials Characterization for Matrix-Dominated Failure Modes - 01 January 1984

STP836-EB: Effects of Defects in Composite Materials - 01 January 1984

STP30201S: Mixed-Mode Strain-Energy-Release Rate Effects on Edge Delamination of Composites - 01 January 1984

STP30202S: A Mixed-Mode Fracture Analysis of (±25/90n)s Graphite/Epoxy Composite Laminates - 01 January 1984

STP30203S: Criticality of Disbonds in Laminated Composites - 01 January 1984

STP30204S: Strain-Energy Release Rate Analysis of Cyclic Delamination Growth in Compressively Loaded Laminates - 01 January 1984

STP30205S: Effect of Fatigue-Induced Defects on the Residual Response of Composite Laminates - 01 January 1984

STP30206S: A Model for Predicting Thermal and Elastic Constants of Wrinkled Regions in Composite Materials - 01 January 1984

STP30196S: Characterization and Analysis of Damage Mechanisms in Tension-Tension Fatigue of Graphite/Epoxy Laminates - 01 January 1984

STP30207S: A Micromechanical Fracture Mechanics Analysis of a Fiber Composite Laminate Containing a Defect - 01 January 1984

STP30208S: Influence of Ply Cracks on Fracture Strength of Graphite/Epoxy Laminates at 76 K - 01 January 1984

STP30195S: Fracture Toughness and Impact Characteristics of a Hybrid System: Glass-Fiber/Sand/Polyester - 01 January 1984

STP30197S: Stress Distributions in Damaged Composites - 01 January 1984

STP30198S: Influence of Prescribed Delaminations on Stiffness-Controlled Behavior of Composite Laminates - 01 January 1984

STP30199S: Characterizing the Effect of Delamination Defect by Mode I Delamination Test - 01 January 1984

STP32596S: Purity Determination by Simultaneous Differential Scanning Calorimetry-Thermomicroscopy - 01 January 1984

STP838-EB: Purity Determinations by Thermal Methods - 01 January 1984

STP32597S: Determination of Impurities in Minerals by Means of Standardized Differential Thermal Analysis - 01 January 1984

STP32588S: Some Remarks on the History and Development of the ASTM Committee E-37 Purity Method - 01 January 1984

STP32589S: Preparation and Evaluation of a Set of Thermal Purity Standards - 01 January 1984

STP32591S: The Purity Determination of Three Compendial Steroids by Differential Scanning Calorimetry - 01 January 1984

STP32592S: Purity Analysis by Dynamic and Isothermal Step Differential Scanning Calorimetry - 01 January 1984

STP32587S: An Overview of the Calorimetric Purity Measurement - 01 January 1984

STP32593S: Thermal Analysis of a Binary System with Distribution Coefficient Much Greater Than 1:2, 3 Dimethylnaphthalene/Anthracene - 01 January 1984

STP32595S: Cryoscopic Determination of the Purity of Benzene by Calorimetry - 01 January 1984

STP30215S: Application of Quantitative Microscopy to Cemented Carbides - 01 January 1984

STP29531S: Paint Research Institute Paint Corrosion Inhibitor Research - 01 January 1984

STP29528S: Perspectives on 100% Solid Spray-Applied Polyurethane Elastomers - 01 January 1984

STP35240S: Fracture Mechanics Analysis of Defect Sizes - 01 January 1984

STP35241S: Effect of Temperature and Humidity on Delayed Failure of Optical Glass Fibers - 01 January 1984

STP35242S: Subthreshold Indentation Flaws in the Study of Fatigue Properties of Ultrahigh-Strength Glass - 01 January 1984

STP35243S: Lifetime Prediction for Hot-Pressed Silicon Nitride at High Temperatures - 01 January 1984

STP35244S: Static Fatigue in High-Performance Ceramics - 01 January 1984

STP35236S: Fatigue Properties of Ceramics with Natural and Controlled Flaws: A Study on Alumina - 01 January 1984

STP35237S: Statistical Analysis of Size and Stress State Effects on the Strength of an Alumina Ceramic - 01 January 1984

STP35238S: Dynamic and Static Fatigue of a Machinable Glass Ceramic - 01 January 1984

STP35239S: Effect of Multiregion Crack Growth on Proof Testing - 01 January 1984

STP32728S: Chevron-Notch Bend Testing in Glass: Some Experimental Problems - 01 January 1984

STP32735S: The Effect of Binder Chemistry on the Fracture Toughness of Cemented Tungsten Carbides - 01 January 1984

STP32736S: A Comparison Study of Fracture Toughness Measurement for Tungsten Carbide-Cobalt Hard Metals - 01 January 1984

STP827-EB: Fractography of Ceramic and Metal Failures - 01 January 1984

STP37124S: Summary - 01 January 1984

STP32590S: Optimization of Accuracy and Precision in the Differential Scanning Calorimetry Dynamic Purity Method - 01 January 1984

STP30232S: Effectiveness of Oil Spill Dispersants at Low Salinities and Low Water Temperatures - 01 January 1984

STP840-EB: Oil Spill Chemical Dispersants: Research, Experience, and Recommendations - 01 January 1984

STP30233S: Chemical Oil Dispersion in Trials at Sea and in Laboratory Tests: The Key Role of Dilution Processes - 01 January 1984

STP30234S: The Use of Remote Sensing in the Determination of Dispersant Effectiveness - 01 January 1984

STP30225S: Toxicity Testing with Constant or Decreasing Concentrations of Chemically Dispersed Oil - 01 January 1984

STP30235S: An Evaluation Program for Aerially Applied Dispersants - 01 January 1984

STP30236S: Treatment of Oil Spill Fire Hazards with Chemical Dispersants: A Case History - 01 January 1984

STP30237S: The Toxicity of Oil Spill Dispersants to Marine Organisms: A Current Perspective - 01 January 1984

STP30238S: The Effects of Dispersants on Incorporation of Volatile Liquid Hydrocarbons into the Water Column - 01 January 1984

STP30239S: Recommended Methods for Testing the Fate and Effects of Dispersed Oil in Marine Sediments - 01 January 1984

STP30240S: Comparison of the Fate and Ecological Effects of Dispersed and Nondispersed Oil in a Variety of Intertidal Habitats - 01 January 1984

STP30226S: Uniform Methods for Exposure Regimes in Aquatic Toxicology Experiments with Chemically Dispersed Oils - 01 January 1984

STP30241S: Tidal Area Dispersant Project: Fate of Dispersed and Undispersed Oil in Two Nearshore Test Spills - 01 January 1984

STP30242S: Effects of Test Spills of Chemically Dispersed and Nondispersed Oil on the Activity of Aspartate Aminotransferase and Glucose-6-Phosphate Dehydrogenase in Two Intertidal Bivalves, Mya arenaria and Mytilus edulis - 01 January 1984

STP30243S: The Toxicity of Oil and Chemically Dispersed Oil to the Seagrass Thalassia testudinum - 01 January 1984

STP30244S: Experimental Use of Dispersants for Spill Countermeasures on Arctic Beaches - 01 January 1984

STP30245S: The Comparative Fate of Chemically Dispersed and Untreated Oils in an Arctic Nearshore Environment - 01 January 1984

STP30246S: Ecological Considerations for the Use of Dispersants in Oil Spill Response - 01 January 1984

STP30247S: Development and Implementation of Guidelines for Dispersant Use: Regional Response Teams - 01 January 1984

STP30227S: Measurement and Prediction of the Effectiveness of Oil Spill Chemical Dispersants - 01 January 1984

STP30248S: A Mathematical Model for Predicting the Ecological Impact of Treated and Untreated Oil Spills - 01 January 1984

STP30249S: Oil Spill Dispersants: Does South Africa Have an Alternative? - 01 January 1984

STP30250S: A Multifaceted Approach to Applying Dispersants - 01 January 1984

STP840-EB: Oil Spill Chemical Dispersants Research, Experience, and Recommendations - 01 January 1984

STP30228S: The Status of the Warren Spring Laboratory's Rolling Flask Test - 01 January 1984

STP30224S: A Laboratory Approach for Determining the Effect of Oils and Dispersants on Mangroves - 01 January 1984

STP30229S: A View of the Mackay and Labofina Laboratory Tests for Assessing Dispersant Effectiveness with Regard to Performance at Sea - 01 January 1984

STP30230S: A Review of the Relationship Between the Characteristics of Spilled Oil and Dispersant Effectiveness - 01 January 1984

STP30231S: The Drop-Weight Interfacial Tension Method for Predicting Dispersant Performance - 01 January 1984

STP29529S: Precision Reactivation of Antifouling Paints - 01 January 1984

STP844-EB: Methods for Assessing the Structural Reliability of Brittle Materials - 01 January 1984

STP35245S: Requirements for Flexure Testing of Brittle Materials - 01 January 1984

STP35246S: Summary - 01 January 1984

STP33232S: Compression Ring Environmental Stress Crack Resistance (Pipe) Precision and Accuracy Round Robin - 01 January 1984

STP846-EB: Quality Assurance of Polymeric Materials and Products - 01 January 1984

STP33226S: Quality Assurance of Polymeric Materials and Products—The Underwriters Laboratories Safety Performance Viewpoint - 01 January 1984

STP33227S: The Role of Interlaboratory Test Programs in Quality Assurance - 01 January 1984

STP33228S: Optimizing Reproducibility in the Analysis of Polymers by Steric Exclusion Chromatography - 01 January 1984

STP33225S: An Industrial Approach to Quality Assurance—Boring? You Bet! But Not If You Want to Make Money - 01 January 1984

STP33229S: Quality Assurance by Means of Thermoanalytical Routine Methods - 01 January 1984

STP33231S: Using Rheological Measurements for Quality Assurance - 01 January 1984

STP32635S: Use of Refractory Metals in Chemical Process Industries - 01 January 1984

STP32631S: Properties of Tantalum for Applications in the Chemical Process Industry - 01 January 1984

STP37091S: Influence of Specimen Size and Stress Field on Energy Loss During a Fracture Event - 01 January 1983

STP36199S: Automated High-Temperature Testing of Ceramic Fiber Board - 01 January 1983

STP808-EB: Compression Testing of Homogeneous Materials and Composites - 01 January 1983

STP36200S: Method for Compression Testing of Composite Materials at High Strain Rates - 01 January 1983

STP36201S: Effect of Specimen Size on the Buckling Behavior of Laminated Composites Subjected to Low-Velocity Impact - 01 January 1983

STP36202S: Compressive Behavior of Unidirectional Fibrous Composites - 01 January 1983

STP36203S: Compression Testing of Graphite/Epoxy - 01 January 1983

STP36204S: Compressive Buckling Behavior of Graphite/Epoxy Isogrid Wide Columns with Progressive Damage - 01 January 1983

STP36205S: Effect of Load Introduction in Compression Testing of Composite Laminates - 01 January 1983

STP36206S: Transverse Compressive Stress-Strain Behavior of Thick Kevlar/Epoxy Laminates - 01 January 1983

STP36207S: Evaluation of Fixturing for Compression Testing of Metal Matrix and Polymer/Epoxy Composites - 01 January 1983

STP36208S: Deformation Behavior of Depleted Uranium/Tungsten Fiber Composites in Compression - 01 January 1983

STP36198S: Fixture for Accurate Load Path in Axial Compression - 01 January 1983

STP31819S: Effect of Low-Velocity Impact Damage on the Fatigue Behavior of Graphite/Epoxy Laminates - 01 January 1983

STP813-EB: Long-Term Behavior of Composites - 01 January 1983

STP31820S: Long-Term Fatigue Behavior of Composite Materials - 01 January 1983

STP31821S: Modeling Stiffness Loss in Boron/Aluminum Laminates Below the Fatigue Limit - 01 January 1983

STP31822S: A Conceptual Model of the Thermal-Spike Mechanism in Graphite/Epoxy Laminates - 01 January 1983

STP31823S: Distribution of Absorbed Moisture in Graphite/Epoxy Laminates After Real-Time Environmental Cycling - 01 January 1983

STP31824S: Thermal Aging of Graphite/Polyimide Composites - 01 January 1983

STP31825S: A Residual Strength Degradation Model for Competing Failure Modes - 01 January 1983

STP31814S: A Numerical Procedure for Predicting Creep and Delayed Failures in Laminated Composites - 01 January 1983

STP31826S: Load Sequence Effects on Graphite/Epoxy [±35]2s Laminates - 01 January 1983

STP31827S: Prediction of Long-Term Failure in Kevlar 49 Composites - 01 January 1983

STP31815S: Damage and Failure in Carbon-Fiber-Reinforced Epoxy Resin - 01 January 1983

STP31816S: Effects of Stress Ratio, Frequency, and Loading Time on the Tensile Fatigue of Glass-Reinforced Epoxy - 01 January 1983

STP31813S: Bolt Clampup Relaxation in a Graphite/Epoxy Laminate - 01 January 1983

STP31817S: Effect of Load Frequency and Lay-Up on Fatigue Life of Composites - 01 January 1983

STP31818S: Compression Fatigue Damage in Thick, Notched Graphite/Epoxy Laminates - 01 January 1983

STP822-EB: New Directions in Molecular Luminescence - 01 January 1983

STP31871S: Investigations on the Use of Laser Dyes as Quantum Counters for Obtaining Corrected Fluorescence Spectra in the Near Infrared - 01 January 1983

STP31872S: Summary - 01 January 1983

STP31865S: Laser-Excited Fluorescence, Photoacoustic, and Photoionization Detection of Polyaromatic Hydrocarbons and Drugs - 01 January 1983

STP31866S: Selective Spectrometric Analysis by Laser-Induced Matrix Isolation Fluorometry - 01 January 1983

STP31867S: Phase-Resolved Nanosecond Spectrofluorometry: Theory, Instrumentation, and New Applications of Multicomponent Analysis by Subnanosecond Fluorescence Lifetimes - 01 January 1983

STP31864S: Rapid Screening Luminescence Techniques for Trace Organic Analysis - 01 January 1983

STP31868S: Analysis of Heterogeneous Emissions by Multifrequency Phase and Modulation Fluorometry - 01 January 1983

STP31869S: Signal-to-Noise Considerations in Fluctuation Analysis Spectroscopic Techniques - 01 January 1983

STP37838S: Conduction Processes in Polymers - 01 January 1983

STP31778S: Development of Low-Cost Polymers for Solar Energy Applications - 01 January 1983

STP795-EB: Pesticide Formulations and Application Systems: Second Conference - 01 January 1983

STP31785S: Pesticide Packaging Container Standards—Sizes and Fittings - 01 January 1983

STP31786S: The Formulation Chemist in an Emergency Response System - 01 January 1983

STP31787S: Introduction to Granular Carriers, Granular Pesticide Formulations, and Processing - 01 January 1983

STP31788S: Available Granular Carriers—Properties and General Processing Methods - 01 January 1983

STP31783S: Package Development from the Pesticide Industry Viewpoint - 01 January 1983

STP31789S: Flowable Pesticide Formulations: Development, Process, and the Need for Standard Testing Procedures - 01 January 1983

STP31790S: Granular Application Equipment—The State of the Art and Current Problems - 01 January 1983

STP31791S: Field Studies Monitoring Worker Exposure to Pesticides - 01 January 1983

STP31792S: Physical and Biological Responses for Several Suspension Formulations - 01 January 1983

STP31784S: Package Selection, Testing, and Transportation Regulations - 01 January 1983

STP31793S: Spray Characteristics of Rotary Atomizers - 01 January 1983

STP28542S: Calculation of Cure Process Variables During Cure of Graphite/Epoxy Composites - 01 January 1983

STP797-EB: Composite Materials: Quality Assurance and Processing - 01 January 1983

STP28543S: Characterization of Some Solvent-Resistant Thermoplastic Matrix Composites - 01 January 1983

STP28544S: Effect of Microstructure on the Mechanical Behavior of Sheet Molding Compound Composites - 01 January 1983

STP28545S: Characterization of Quick-Cure and Vacuum-Bag Cure Composites - 01 January 1983

STP28536S: The Development of a Material Specification for 177°C (350°F) Curing Graphite/Epoxy Composites - 01 January 1983

STP28537S: Control of Composite Cure Processes - 01 January 1983

STP28535S: Quality Assurance of Graphite/Epoxy by High-Performance Liquid Chromatography - 01 January 1983

STP28539S: A Four-Point Shear Test for Graphite/Epoxy Composites - 01 January 1983

STP28540S: Nondestructive Evaluation of Composite Materials: A Philosophy, An Approach, and An Example - 01 January 1983

STP28541S: Void Formation and Transport During Composite Laminate Processing: An Initial Model Framework - 01 January 1983

STP37232S: Laser Damage of Crystalline Silicon by Multiple 1.06μm, Picosecond Pulses - 01 January 1983

STP37233S: A Technique for Increasing the Optical Strength of Single-Crystal NaCl and KCl Through Temperature Cycling - 01 January 1983

STP37235S: Surface-to-Bulk Optical Absorption on Uncoated Sapphire and Zinc Selenide Using Photoacoustic Chopping Frequency Studies - 01 January 1983

STP37237S: Reversible and Irreversible Changes in NaCl and KCl Absorption During Multiple Pulse 10.6 μm Irradiation - 01 January 1983

STP37248S: The Effect of the Treatment and Ageing on KC1 Surface Breakdown Threshold - 01 January 1983

STP37226S: Multispectral Chemically Vapor-Deposited ZnS: An Initial Characterization - 01 January 1983

STP37227S: Progress in The Development of Multispectral Glasses Based on The Fluorides of Heavy Metals - 01 January 1983

STP37287S: Simple Theory of Microwave Absorption in Alkali Halides - 01 January 1983

STP33529S: Toxicity of the Herbicide Endothall to Juvenile Chinook Salmon (Oncorhynchus tshawytscha) - 01 January 1983

STP33540S: Testing Procedure for Evaluating Codisposal of Industrial Wastes and Municipal Refuse with Particular Reference to Pesticides - 01 January 1983

STP34186S: A Proposed Rating System to Describe the Behavior of Reinforced Plastics in Large-Scale Fire Tests - 01 January 1983

STP816-EB: Behavior of Polymeric Materials in Fire - 01 January 1983

STP34182S: Thermal Degradation of Cable and Wire Insulations - 01 January 1983

STP34183S: Influence of Flame-Retardant Chemicals on the Gas-Phase Combustion of Poly(Ethylene Terephthalate) - 01 January 1983

STP34184S: Factors Affecting Smoke Production During Combustion of Polyolefin Polymers - 01 January 1983

STP30174S: A Test Protocol for Assessment of Primary Poisoning Hazard to Ground-Feeding Birds from Broadcast Pelletized Rodenticides - 01 January 1983

STP817-EB: Vertebrate Pest Control and Management Materials: Fourth Symposium - 01 January 1983

STP30175S: Development of a Preferred Bait for Quelea Control - 01 January 1983

STP30176S: Use of Outdoor Pens in Evaluating Field Efficacy of Rodenticides - 01 January 1983

STP30177S: An Evaluation of Methods Used in Comparative Field Testing of Commensal Rodenticides - 01 January 1983

STP30178S: A Method for Inferring the Taste Qualities of Rodenticides to Rodents - 01 January 1983

STP30179S: Design and Evaluation Criteria for Development of Toxic Wicks for Rodent Control - 01 January 1983

STP30180S: Field Methodology for Evaluating Rodenticide Efficacy - 01 January 1983

STP30168S: Exploitable Characteristics of Neophobia and Food Aversions for Improvements in Rodent and Bird Control - 01 January 1983

STP30183S: A Simulated Burrow System for Laboratory Evaluation of Vertebrate Control Fumigants - 01 January 1983

STP30187S: Methods Used in the Field Evaluation of Anticoagulant Rodenticides in India - 01 January 1983

STP30189S: Criteria for the Selection and Development of Predacides - 01 January 1983

STP30167S: Comparisons Between Vertebrate Pest Control Materials: Essential Considerations - 01 January 1983

STP30170S: Tests of the Enhancement of Avian Repellent Chemicals with Sensory Cues - 01 January 1983

STP30172S: Laboratory Methods for Evaluating Bird Repellents Applied to Ripening Fruits - 01 January 1983

STP30173S: A Changeover Test Design to Compare the Relative Efficacies of Bird Repellent Seed Corn Treatments - 01 January 1983

STP44832S: A Guide to The Safe Handling of Hazardous Materials Accidents - 01 January 1983

STP825-EB: A Guide to the Safe Handling of Hazardous Materials Accidents - 01 January 1983

STP32489S: Electrodyn Sprayer Pesticide Application Using Electrostatic Atomization - 01 January 1983

STP828-EB: Pesticide Formulations and Application Systems: Third Symposium - 01 January 1983

STP32490S: Pesticide Delivery to Aquatic Pests - 01 January 1983

STP32491S: Formulation, Development, and Application of an Insecticide Granule - 01 January 1983

STP32480S: Surface Acidity Distribution on Precipitated Silicas - 01 January 1983

STP32492S: Corncob Granules and Pelleted Carriers—New, Controlled, Safer Methods of Handling Pesticides - 01 January 1983

STP32493S: Development of Water-Dispersible Granule Systems - 01 January 1983

STP32481S: Formulation and Application of Microbial Insecticides for Forest Insect Pest Management: Problems and Considerations - 01 January 1983

STP32482S: A Quality Control Program Used for Agricultural Formula A Production - 01 January 1983

STP32483S: Laboratory Measurement of Pesticide Vapor Losses - 01 January 1983

STP32484S: Evaluation of Tank Mix Compatibility Using the Laboratory Sprayer - 01 January 1983

STP32479S: Formulations of Entomopathogens - 01 January 1983

STP32485S: Analysis of Droplet Spectra and Spray Recovery as a Function of Atomizer Type and Fluid Physical Properties - 01 January 1983

STP32486S: Spray Drift Exposure Assessment - 01 January 1983

STP32487S: Helicopter Application for Gypsy Moth in Residential Communities - 01 January 1983

STP32488S: Flow Rates of Guthion and Cottonseed Oil Mixtures - 01 January 1983

STP768-EB: Composites for Extreme Environments - 01 January 1982

STP29357S: Environmental Exposure of Carbon/Epoxy Composite Material Systems - 01 January 1982

STP29358S: Dynamic Tests of Graphite/Epoxy Composites in Hygrothermal Environments - 01 January 1982

STP29350S: V378A Polyimide Resin—A New Composite Matrix for the 1980's - 01 January 1982

STP29351S: Thermomechanical Characterization of Graphite/Polyimide Composites - 01 January 1982

STP29352S: Thermophysical Properties Data on Graphite/Polyimide Composite Materials - 01 January 1982

STP29349S: Environmental Effects on Graphite Fiber Reinforced PMR-15 Polyimide - 01 January 1982

STP29353S: Elastic Properties and Fracture Behavior of Graphite/Polyimide Composites at Extreme Temperatures - 01 January 1982

STP29354S: Filament Wound Composite Thermal Isolator Structures for Cryogenic Dewars and Instruments - 01 January 1982

STP29369S: Wear Characteristics of Industrial Platings - 01 January 1982

STP769-EB: Selection and Use of Wear Tests for Coatings - 01 January 1982

STP29365S: Wear Testing of Abrasion-Resistant Coated Plastics - 01 January 1982

STP29366S: Solid Particle Erosion of Coatings on Transparent Polycarbonate and Reinforced Composites - 01 January 1982

STP29364S: Selection and Use of Wear Tests for Coatings - 01 January 1982

STP29367S: Wet-Sand Rubber-Wheel Abrasion Test for Thin Coatings - 01 January 1982

STP29368S: Assessment of the Wear of Composite Coatings in Reciprocating Line Contact Conditions - 01 January 1982

STP29382S: Mechanical Behavior of Three Sheet Molding Compounds - 01 January 1982

STP772-EB: Short Fiber Reinforced Composite Materials - 01 January 1982

STP29384S: Statistical Fracture Initiation in Randomly Oriented Chopped-Mat Fiber Composites Subjected to Biaxial Thermomechanical Loading - 01 January 1982

STP29385S: Elastic and Strength Properties of Continuous/Chopped Glass Fiber Hybrid Sheet Molding Compounds - 01 January 1982

STP29386S: Dynamic Mechanical Characterization of Fiber Filled Unsaturated Polyester Composites - 01 January 1982

STP29387S: Fracture Characterization of a Random Fiber Composite Material - 01 January 1982

STP29388S: Viscoelastic Characterization of a Random Fiber Composite Material Employing Micromechanics - 01 January 1982

STP29389S: Summary - 01 January 1982

STP29377S: Effect of Fiber Systems on Stiffness Properties of Chopped Fiber Reinforced Sheet Molding Compound Composites - 01 January 1982

STP29376S: Crack Propagation Modes in Injection Molded Fiber Reinforced Thermoplastics - 01 January 1982

STP29378S: Effect of Processing Variables on the Mechanical and Thermal Properties of Sheet Molding Compound - 01 January 1982

STP29379S: Static and Fatigue Strength of Glass Chopped Strand Mat/Polyester Resin Laminates - 01 January 1982

STP29380S: An Investigation of Stress-Dependent, Temperature-Dependent, and Time-Dependent Strains in Randomly Oriented Fiber Reinforced Composites - 01 January 1982

STP29381S: Nondestructive Characterization of Chopped Glass Fiber Reinforced Composite Materials - 01 January 1982

STP30085S: Human Evaluations of Warning Odorants in Propane - 01 January 1982

STP34323S: Stiffness-Reduction Mechanisms in Composite Laminates - 01 January 1982

STP775-EB: Damage in Composite Materials: Basic Mechanisms, Accumulation, Tolerance, and Characterization - 01 January 1982

STP34324S: The Dependence of Transverse Cracking and Delamination on Ply Thickness in Graphite/Epoxy Laminates - 01 January 1982

STP34325S: Characterization of Delamination Onset and Growth in a Composite Laminate - 01 January 1982

STP34326S: Characterizing Delamination Growth in Graphite-Epoxy - 01 January 1982

STP34318S: Damage Documentation in Composites by Stereo Radiography - 01 January 1982

STP34327S: Compression Fatigue Behavior of Composites in the Presence of Delaminations - 01 January 1982

STP34328S: Effect of Stacking Sequence on Damage Propagation and Failure Modes in Composite Laminates - 01 January 1982

STP34329S: Damage Mechanism and Life Prediction of Graphite/Epoxy Composites - 01 January 1982

STP34330S: What Is Fatigue Damage? - 01 January 1982

STP34319S: Fractographic Studies of Graphite/Epoxy Fatigue Specimens - 01 January 1982

STP34320S: An Investigation of Cumulative Damage Development in Quasi-Isotropic Graphite/Epoxy Laminates - 01 January 1982

STP34321S: Effects of Moisture, Residual Thermal Curing Stresses, and Mechanical Load on the Damage Development in Quasi-Isotropic Laminates - 01 January 1982

STP34317S: Toward the Nondestructive Characterization of Fatigue Damage in Composite Materials - 01 January 1982

STP34322S: Mechanisms of Fatigue Damage in Boron/Aluminum Composites - 01 January 1982

STP33759S: Accelerated Weathering and Precision Spectral Ultraviolet Measurements - 01 January 1982

STP781-EB: Permanence of Organic Coatings - 01 January 1982

STP33760S: Prediction of the Influence of Titanium Dioxide on Polymer Weathering - 01 January 1982

STP33758S: Overview—On the Weathering of Organic Coatings - 01 January 1982

STP33761S: Accelerated Outdoor Weathering Tests for Evaluating the Durability of Coatings - 01 January 1982

STP33763S: A Laboratory Weathering Method for Evaluating Finish Durability on Plywood Sidings and Composite Panels - 01 January 1982

STP28477S: In-Plane Behavior of a Ribbon-Reinforced Composite - 01 January 1982

STP787-EB: Composite Materials: Testing and Design (6th Conference) - 01 January 1982

STP28478S: Biaxial Strength Behavior of Glass-Reinforced Polyester Resins - 01 January 1982

STP28479S: Construction and Use of Toughness Maps in a Fracture Analysis of the Micromechanics of Composite Failure - 01 January 1982

STP28480S: Initiation and Accumulation of Damage in Composite Laminates - 01 January 1982

STP28481S: Strength and Fracture Characteristics of Graphite-Glass Intraply Hybrid Composites - 01 January 1982

STP28471S: Iosipescu Shear Properties of SMC Composite Materials - 01 January 1982

STP28482S: Matrix Cracking in Short Fiber Reinforced Composites under Static and Fatigue Loading - 01 January 1982

STP28483S: Stiffness Reduction as an Indicator of Damage in Graphite/Epoxy Laminates - 01 January 1982

STP28484S: Failure Characterization of a Graphite/Epoxy Laminate Through Proof Testing - 01 January 1982

STP28485S: Effects of Spectrum Variations on Fatigue Life of Composites - 01 January 1982

STP28486S: Stiffness Degradation of Fiber-Reinforced Composites under Uniaxial Tensile, Pure Torsional, and Biaxial Fatigue at Cryogenic Temperature - 01 January 1982

STP28487S: Fatigue Response of Composite Laminates with Internal Flaws - 01 January 1982

STP28488S: Nondestructive Evaluation of Damage in FP/Aluminum Composites - 01 January 1982

STP28489S: Nondestructive Evaluation of Fiber-Reinforced Composites with Acoustic Backscattering Measurements - 01 January 1982

STP28472S: Finite Element Analysis of Biaxial Stress Test Specimen for Graphite/Epoxy and Glass Fabric/Epoxy Composites - 01 January 1982

STP28490S: Predicting Viscoelastic Response and Delayed Failures in General Laminated Composites - 01 January 1982

STP28491S: History-Dependent Thermomechanical Properties of Graphite/Aluminum Unidirectional Composites - 01 January 1982

STP28492S: Strain Rate Characterization of Unidirectional Graphite/Epoxy Composite - 01 January 1982

STP28493S: Influence of Frequency and Environmental Conditions on Dynamic Behavior of Graphite/Epoxy Composites - 01 January 1982

STP28494S: Indentation Law for Composite Laminates - 01 January 1982

STP28495S: Effect of Resin on Impact Damage Tolerance of Graphite/Epoxy Laminates - 01 January 1982

STP28496S: Use of the Lognormal Distribution for Characterizing Composite Materials - 01 January 1982

STP28497S: Durability/Life of Fiber Composites in Hygrothermomechanical Environments - 01 January 1982

STP28473S: Characterization of Lamina and Interlaminar Damage in Graphite/Epoxy Composites by the Deply Technique - 01 January 1982

STP28498S: Study of Compression Properties of Graphite/Epoxy Composites with Discontinuities - 01 January 1982

STP28499S: Experimental Investigations of Fiber Composite Reinforcement of Cracked Metallic Structures - 01 January 1982

STP28470S: Through-the-Thickness Tensile Strength of Fiber-Reinforced Plastics - 01 January 1982

STP28474S: Thermal Behavior of a Graphite/Epoxy Composite in the Subcured State - 01 January 1982

STP28475S: Mechanical Characteristics of T300-6K/V378A Graphite/Polyimide - 01 January 1982

STP28476S: Hybrid-Fiber-Reinforced Sheet Molding Compound Composite - 01 January 1982

STP29338S: Compatibility Agents for Liquid Fertilizer-Pesticide Combinations - 01 January 1982

STP764-EB: Pesticide Tank Mix Applications: First Conference - 01 January 1982

STP29339S: Tank Mix Carrier Liquids Used in Agricultural Applications - 01 January 1982

STP29340S: Production of Fertilizer-Pesticide Mixtures - 01 January 1982

STP29337S: Pesticide Compatibility: An Overview from Technical Services - 01 January 1982

STP29341S: Some Observations on Closed Mixing Systems for Pesticides - 01 January 1982

STP29342S: Closed Mixing and Loading Systems and Pesticide Containers - 01 January 1982

STP29343S: Regulation of Pesticide Application with Respect to Spray Drift - 01 January 1982

STP29344S: Field and Bulk Blending of Pesticide Tank Mixes - 01 January 1982

STP29355S: Space Environmental Effects on Graphite/Epoxy Composites - 01 January 1982

STP29356S: Effects of Extreme Aircraft Storage and Flight Environments on Graphite/Epoxy - 01 January 1982

STP29359S: Influence of Quality Control Variables on Failure of Graphite/Epoxy Under Extreme Moisture Conditions - 01 January 1982

STP29371S: Methods of Evaluating Materials for Icebreaker Hull Coatings - 01 January 1982

STP29383S: Vibration Characteristics of Automotive Composite Materials - 01 January 1982

STP38681S: Vapor Retarders in Roofing Systems: When Are They Necessary? - 01 January 1982

STP33762S: Evaluating the Performance of Organic Coatings and Building Materials - 01 January 1982

STP33984S: Evaluation of Employee Exposure to Trinitrofluorenone from Electrophotographic Printers and Copiers in a User Environment - 01 January 1982

STP28500S: Testing of Buried Fiberglass-Reinforced Plastic Pipes - 01 January 1982

STP788-EB: Processing and Testing of Reaction Injection Molding Urethanes - 01 January 1982

STP28506S: Reinforced and Nonreinforced Reaction Injection Molding Machines for Production of Polyurethane Specimens for Material Development, Evaluation, and Quality Control - 01 January 1982

STP28507S: Equipment for Processing Microcellular Urethanes by the Reaction Injection Molding Process - 01 January 1982

STP28505S: Reaction Injection Molding Urethanes—Detroit and Beyond - 01 January 1982

STP28508S: Reaction Injection Molding Urethanes: Heat Sag Characteristics - 01 January 1982

STP28509S: Testing: Thermal Expansion of Reinforced and Nonreinforced Urethane Materials - 01 January 1982

STP28510S: A Comparison of Dynamically Determined Shear Modulus with Statically Determined Flexural Modulus for Reaction Injection Molding Urethanes - 01 January 1982

STP28511S: Practical Applications of Variable Rate Impact Testing of Reaction Injection Molding Urethanes - 01 January 1982

STP37007S: Ultrafine Finishing of Ceramics and Metals by Float Polishing - 01 October 1981

STP37033S: The Role of Laser-Induced Primary Defect Formation in Optical Breakdown of NaCl - 01 October 1981

STP36998S: Intensity Dependent Absorption of Alkali-Halides at 10.6 μm - 01 October 1981

STP36999S: Pulsed CO2 Damage Threshold Measurements of Rb:KCl and NaCl - 01 October 1981

STP37000S: Infrared Absorption in Highly Transparent Glasses Based on Hafnium Fluoride - 01 October 1981

STP27616S: Mechanism of Fatigue in Boron-Aluminum Composites - 01 January 1981

STP723-EB: Fatigue of Fibrous Composite Materials - 01 January 1981

STP27617S: Effects of Proof Test on the Strength and Fatigue Life of a Unidirectional Composite - 01 January 1981

STP27618S: Fatigue Characterization of Composite Materials - 01 January 1981

STP27619S: Fatigue Behavior of Graphite-Epoxy Laminates at Elevated Temperatures - 01 January 1981

STP27620S: Compression Fatigue Behavior of Graphite/Epoxy in the Presence of Stress Raisers - 01 January 1981

STP27621S: Effects of Truncation of a Predominantly Compression Load Spectrum on the Life of a Notched Graphite/Epoxy Laminate - 01 January 1981

STP27622S: Load Sequence Effects on the Fatigue of Unnotched Composite Materials - 01 January 1981

STP27611S: Bolt Hole Growth in Graphite-Epoxy Laminates for Clearance and Interference Fits When Subjected to Fatigue Loads - 01 January 1981

STP27623S: Fatigue Retardation Due to Creep in a Fibrous Composite - 01 January 1981

STP27624S: Off-Axis Fatigue of Graphite/Epoxy Composite - 01 January 1981

STP27625S: Fatigue Behavior of Silicon-Carbide Reinforced Titanium Composites - 01 January 1981

STP27626S: Estimation of Weibull Parameters for Composite Material Strength and Fatigue Life Data - 01 January 1981

STP27612S: Fatigue Properties of Unnotched, Notched, and Jointed Specimens of a Graphite/Epoxy Composite - 01 January 1981

STP27610S: Effect of Post Buckling on the Fatigue of Composite Structures - 01 January 1981

STP27613S: Experimental and Analytical Study of Fatigue Damage in Notched Graphite/Epoxy Laminates - 01 January 1981

STP27614S: Effect of Ply Constraint on Fatigue Damage Development in Composite Material Laminates - 01 January 1981

STP27615S: Damage Initiation in a Three-Dimensional Carbon-Carbon Composite Material - 01 January 1981

STP33433S: Strength Characterization and Nature of Crack Propagation in Ceramic Materials - 01 January 1981

STP33434S: Fractographic Analysis of Delayed Failure in Ceramics - 01 January 1981

STP33435S: Multiple-Mist Regions on Glass Fracture Surfaces - 01 January 1981

STP33436S: Localized Deformation and Fracture of Magnesium Oxide - 01 January 1981

STP33437S: Fatigue Fracture Surface Micromorphology in Poly(vinyl chloride) - 01 January 1981

STP29306S: Biaxial Testing of Graphite/Epoxy Laminates with Cracks - 01 January 1981

STP734-EB: Test Methods and Design Allowables for Fibrous Composites - 01 January 1981

STP29307S: A Comparative Study of Composite Shear Specimens Using the Finite-Element Method - 01 January 1981

STP29308S: An Evaluation of the Sandwich Beam Compression Test Method for Composites - 01 January 1981

STP29309S: Stress Distribution in Sandwich Beams in Uniform Bending - 01 January 1981

STP29311S: Mechanical Characterization of PMR-15 Graphite/Polyimide Bolted Joints - 01 January 1981

STP29312S: Cost-Effective Mechanical Property Characterization - 01 January 1981

STP29301S: Application of Four-Point Ring-Twist Test for Determining Shear Modulus of Filamentary Composites - 01 January 1981

STP29313S: Statistical Analysis of Fibrous Composite Strength Data - 01 January 1981

STP29314S: Fitting Models to Composite Materials Fatigue Data - 01 January 1981

STP29315S: Mechanical Property Characterization of Intraply Hybrid Composites - 01 January 1981

STP29316S: Experimental Study of Compression-Compression Fatigue of Graphite/Epoxy Composites - 01 January 1981

STP29317S: Buckling of Composite Cylinders Under Combined Compression and Torsion—Theoretical/Experimental Correlation - 01 January 1981

STP29302S: Compression Testing of Graphite/Epoxy Composite Materials - 01 January 1981

STP29319S: Bolted Joint Design - 01 January 1981

STP29320S: Environmental Effects on Composite Fracture Behavior - 01 January 1981

STP29321S: Effects of Liquids on the Stress-Rupture Lives of Fiber Glass-Reinforced Plastics - 01 January 1981

STP29303S: Low-Velocity Impact Tests on Fibrous Composite Sandwich Structures - 01 January 1981

STP29300S: A Single-Ply Transverse Tension Strength Test for Unidirectional Composites - 01 January 1981

STP29304S: Fracture Testing of Injection-Molded Glass and Carbon Fiber-Reinforced Thermoplastics - 01 January 1981

STP29305S: On the Off-Axis and Angle-Ply Strength of Composites - 01 January 1981

STP27671S: The Need for More Descriptive and Meaningful Physical Data on Plastic Materials - 01 January 1981

STP736-EB: Physical Testing of Plastics—Correlation with End-Use Performance - 01 January 1981

STP27672S: Testing Plastics for Performance: Meeting the Challenge of the Future - 01 January 1981

STP27666S: Fatigue and Its Relationship to End-Use Performance - 01 January 1981

STP27664S: A Rationale for Testing to Establish Suitability for an End-Use Application - 01 January 1981

STP27667S: Instrumented Impact Testing for Evaluating End-Use Performance - 01 January 1981

STP27668S: Instrumented Impact Measurements on Some Polymers - 01 January 1981

STP27669S: On Abrasion, Scratch, and Friction Testing—Relationship to End-Use Application - 01 January 1981

STP27670S: Wear Testing—Correlation with End-Use Performance - 01 January 1981

STP28794S: Fatigue Fracture Micromechanisms in Poly(Methyl Methacrylate) of Broad Molecular Weight Distribution - 01 January 1981

STP28804S: Dependence of Strength on Particle Size in Graphite - 01 January 1981

STP28805S: Fracture Behavior of a Thick-Section Graphite/Epoxy Composite - 01 January 1981

STP28301S: Specimen Size Effects in Fracture Toughness Testing of Heterogeneous Ceramics by the Notch Beam Method - 01 January 1981

STP28302S: The Character of Cracks In Fracture Toughness Measurements of Ceramics - 01 January 1981

STP28295S: Determination of High-Temperature KI-v Data for Si-Al-O-N Ceramics - 01 January 1981

STP28310S: Consequences of Varying Surface Heat Transfer Coefficients, Material Properties, and Cyclical Ambient Temperatures upon Stress Intensity Factors for Edge Cracks - 01 January 1981

STP28311S: Summary - 01 January 1981

STP28296S: Fracture Toughness of Glass Using the Indentation Fracture Technique - 01 January 1981

STP28297S: Application of Single Edge Notched Beam and Indentation Techniques to Determine Fracture Toughness of Alpha Silicon Carbide - 01 January 1981

STP28298S: Effect of Stable Crack Growth on Fracture Toughness Determination for Hot-Pressed Silicon Nitride at Elevated Temperatures - 01 January 1981

STP28299S: Precracking of Fracture Toughness Specimens by Wedge Indentation - 01 January 1981

STP28300S: Test-Microstructural Dependence of Fracture Energy Measurements in Ceramics - 01 January 1981

STP33478S: Bolt-Bearing Fatigue of a Graphite/Epoxy Laminate - 01 January 1981

STP33479S: Failure Analysis of Composite Laminates with a Fastener Hole - 01 January 1981

STP33473S: A Nondestructive Method of Evaluating Adhesive Bond Strength in Fiberglass Reinforced Plastic Assemblies - 01 January 1981

STP33476S: Bolted Field Repair of Graphite/Epoxy Wing Skin Laminates - 01 January 1981

STP27347S: Chapter 3—Cleaning Methods - 01 January 1981

STP403A-EB: Cold Cleaning with Halogenated Solvents - 01 January 1981

STP27345S: Chapter 1—Applications and Limitations of Cold Cleaning - 01 January 1981

STP27348S: Chapter 4—General Discussion of Hazards - 01 January 1981

STP27349S: Chapter 5—Bulk Storage - 01 January 1981

STP27350S: Chapter 6—General Conclusions and Recommendations - 01 January 1981

STP27346S: Chapter 2—Solvents Used in Cold Cleaning - 01 January 1981

STP29310S: Developing Design Allowables for Composite Helicopter Structures - 01 January 1981

STP27665S: Fracture Toughness Testing of HDPE Plastic Pipe - 01 January 1981

STP34162S: Analysis of Variance as a Method for Examining Contaminant Residues in Fish: National Pesticide Monitoring Program - 01 January 1981

STP28806S: Fracture Control in Ballistic-Damaged Graphite/Epoxy Wing Structure - 01 January 1981

STP33477S: Improving Composite Bolted Joint Efficiency by Laminate Tailoring - 01 January 1981

STP749-EB: Joining of Composite Materials - 01 January 1981

STP33480S: Design Data for Graphite Cloth Epoxy Bolted Joints at Temperatures up to 450 K - 01 January 1981

STP33472S: Further Developments in the Design and Analysis of Adhesive-Bonded Structural Joints - 01 January 1981

STP33474S: Analysis of the “Joggle-Lap” Joint for Automotive Applications - 01 January 1981

STP33475S: Static and Fatigue Strength of High Load Intensity Steel-Hybrid Composite Bonded Scarf Joints - 01 January 1981

STP752-EB: Vertebrate Pest Control and Management Materials - 01 January 1981

STP35155S: Comparison of Environmental Protection Agency and Company Laboratory Efficacy Data for Federally Registered Rat and Mouse Toxicants - 01 January 1981

STP35156S: Considerations in the Design of Test Methods for Measuring Bait Shyness - 01 January 1981

STP35159S: Plastic Enclosures and Containers for Evaluating the Efficacy and Safety of Pesticides in Aquatic Environments - 01 January 1981

STP35145S: Suggested Methods for Determining the Efficacy of Vertebrate Control Agents in Developing Countries - 01 January 1981

STP35160S: Simulated Field Testing Methods for Pest Control Agents in Lotic and Lentic Ecosystems - 01 January 1981

STP35161S: Recommended Practice for Determining the Effectiveness and Safety of Aquatic Animal Control Agents in Static Water Studies - 01 January 1981

STP35162S: Reducing Potential Hazards of Pesticides to Fish, Wildlife, and Habitat - 01 January 1981

STP35147S: Improved Method of Assessing Pesticide Hazards to Nontarget Game Birds Under Simulated Field Conditions - 01 January 1981

STP35148S: Approach for Assessing Feed Loss Damage by Starlings at Livestock Feedlots - 01 January 1981

STP35144S: Legal, Scientific, and Political Cooperation—The Impossible Dream - 01 January 1981

STP35149S: Laboratory Method for Evaluating the Secondary Hazard Potential of Avicides and Rodenticides to Nontarget Birds and Mammals - 01 January 1981

STP35150S: Test Method for Evaluating the Effects of Chemicals on Starling Reproduction - 01 January 1981

STP35151S: Methods for Assessing the Efficiency of Aerial Spraying Control Operations on Quelea Colonies and Roosts - 01 January 1981

STP35152S: Field Method for Evaluation of Rodenticides for Control of Microtus pinetorum in Apple Orchards - 01 January 1981

STP35153S: Analytical Techniques for Fluorescent Chemicals Used as Systemic or External Wildlife Markers - 01 January 1981

STP35154S: Method for Analysis of Rat Acceptance Data Generated in Anticoagulant Bait Bioassays - 01 January 1981

STP38650S: Electron Spectroscopy in Catalyst Research - 01 January 1980

STP36964S: Fatigue Crack Propagation in Nylon 66 Blends - 01 January 1980

STP27173S: Chapter 8—Inhibitors to Use of Composites - 01 January 1980

STP704-EB: Commercial Opportunities for Advanced Composites - 01 January 1980

STP27170S: Chapter 5—Properties of Composite Materials - 01 January 1980

STP27167S: Chapter 2—Summary - 01 January 1980

STP27168S: Chapter 3—Reinforcement and Matrix Materials - 01 January 1980

STP27171S: Chapter 6—Cost of Composite Materials - 01 January 1980

STP27172S: Chapter 7—Commercial Applications for Advanced Composites - 01 January 1980

STP708-EB: Impediments to Analysis - 01 January 1980

STP27444S: Comparison of Crack Behavior in Homalite 100 and Araldite B - 01 January 1980

STP27437S: A Dynamic Viscoelastic Analysis of Crack Propagation and Crack Arrest in a Double Cantilever Beam Test Specimen - 01 January 1980

STP30070S: Degradation of Elastomers in Geothermal Environments - 01 January 1980

STP30071S: Polymeric and Composite Materials for Use in Systems Utilizing Hot, Flowing Geothermal Brine III - 01 January 1980

STP36096S: Durability and Aging of Sealants - 01 January 1980

STP36097S: New Testing Methods for Sealants - 01 January 1980

STP36098S: Comparison of National Specifications for Silicon Sealants - 01 January 1980

STP36099S: Fatigue and Movement Capabilities of Field-Molded Sealants - 01 January 1980

STP36103S: Selection of Paints and Coatings Used in Civil Engineering and for Road Safety - 01 January 1980

STP36104S: Durability of Colorants for Plastic Building Products - 01 January 1980

STP27169S: Chapter 4—Fabrication Processes for Composite Materials and Structures - 01 January 1980

STP29212S: Research and Development Efforts in Military Antifreeze Formulations - 01 January 1980

STP705-EB: Engine Coolant Testing: State of the Art - 01 January 1980

STP29213S: Corrosion Testing of Furnace and Vacuum Brazed Aluminum Radiators - 01 January 1980

STP29214S: Use of Electrochemical Techniques for Corrosion Testing of Antifreezes - 01 January 1980

STP29215S: Chemical Properties as a Tool for Maintaining High-Quality Engine Antifreeze Coolants in the Marketplace - 01 January 1980

STP29217S: How Good is the ASTM Simulated Service Corrosion Testing of Engine Coolants? - 01 January 1980

STP29218S: Detecting Coolant Corrosivity with Electrochemical Sensors - 01 January 1980

STP29219S: Static Vehicle Corrosion Test Method and Its Significance in Engine Coolant Evaluations for Aluminum Heat Exchangers - 01 January 1980

STP29220S: Evaluating the Corrosion Resistance of Aluminum Heat Exchanger Materials - 01 January 1980

STP29222S: Statistical Treatment of Laboratory Data for ASTM D 1384-70 Using Soft Solder - 01 January 1980

STP29223S: Refinement of the Vibratory Cavitation Erosion Test for the Screening of Diesel Cooling System Corrosion Inhibitors - 01 January 1980

STP29208S: Experience of the British Standards Institution in the Field of Engine Coolants - 01 January 1980

STP29224S: Electrochemical Corrosion of an Aluminum Alloy in Cavitating Ethylene Glycol Solutions - 01 January 1980

STP29226S: Cavitation Corrosion - 01 January 1980

STP29227S: Evaluation of a Novel Engine Coolant Based on Ethanediol Developed to Replace AL-3 (NATO S735) as the Automotive Antifreeze Used by the British Army - 01 January 1980

STP29228S: Cooling Systems Corrosion in Relation to Design and Materials - 01 January 1980

STP29229S: Testing of Solder for Corrosion by Engine Coolants - 01 January 1980

STP29207S: Automotive Engine Coolants: A Review of Their Requirements and Methods of Evaluation - 01 January 1980

STP29209S: Automotive Coolants in Europe: Technical Requirements and Testing - 01 January 1980

STP29210S: Laboratory Research in the Development and Testing of Inhibited Coolants in Boiling Heat-Transfer Conditions - 01 January 1980

STP29211S: Simulated Service Tests for Evaluation of Engine Coolants - 01 January 1980

STP27468S: Influence of Selected Chelating Admixtures upon Concrete Cracking Due to Embedded Metal Corrosion - 01 January 1980

STP29289S: Low-Temperature Properties of Expanded Polyurethane and Polystyrene - 01 January 1980

STP36028S: Characterization of Impact Damage in Composite Laminates - 01 December 1979

STP696-EB: Nondestructive Evaluation and Flaw Criticality for Composite Materials - 01 December 1979

STP36029S: Flaw Criticality of Graphite/Epoxy Structures - 01 December 1979

STP36030S: Effect of Impact Damage and Holes on the Compressive Strength of a Graphite/Epoxy Laminate - 01 December 1979

STP36031S: Impact Damage Effects on the Strength of Advanced Composites - 01 December 1979

STP36032S: A Fracture Mechanics Approach to the Analysis of Graphite/Epoxy Laminated Precracked Tension Panels - 01 December 1979

STP36033S: Summary - 01 December 1979

STP36034S: Moisture-Induced Surface Damage in T300/5208 Graphite/Epoxy Laminates - 01 December 1979

STP36035S: Fracture Surface Characterization of Commercial Graphite/Epoxy Systems - 01 December 1979

STP36022S: Holographic Techniques for Defect Detection in Composite Materials - 01 December 1979

STP36036S: Determining Fracture Directions and Fracture Origins on Failed Graphite/Epoxy Surfaces - 01 December 1979

STP36037S: Moisture Diffusion Analysis of Microstructure Degradation in Graphite/Expoxy Composites - 01 December 1979

STP36038S: Characterization of Constraint Effects on Flaw Growth - 01 December 1979

STP36039S: Nondestructive Testing Methods for Graphite/Aluminum Composites - 01 December 1979

STP36023S: Effects of Material Inhomogeneities on Ultrasonic Measurements: The Problem and a Solution - 01 December 1979

STP36024S: Neutron Radiographic Nondestructive Inspection for Bonded Composite Structures - 01 December 1979

STP36021S: Ultrasonic Techniques for Inspecting Flat and Cylindrical Composite Specimens - 01 December 1979

STP36025S: Liquid Crystals for Flaw Detection in Composites - 01 December 1979

STP36026S: Detection of Damage in Composite Materials by Vibrothermography - 01 December 1979

STP35935S: Wear and Degradation of Retrieved Ultrahigh Molecular Weight Polyethylene and Other Polymeric Implants - 01 October 1979

STP35936S: Delrin as a Material for Joint Prostheses—A Review - 01 October 1979

STP35934S: Toxicology of Degradation Products of Plastics - 01 October 1979

STP35937S: Some Observations on the Role of Cellular Enzymes in the In-Vivo Degradation of Polymers - 01 October 1979

STP35938S: In-Vivo/In-Vitro Life Testing of Vascular Prostheses - 01 October 1979

STP35939S: Degradation of Ceramic Materials in Physiological Media - 01 October 1979

STP34993S: Behavior of Inorganic Materials in Fire - 01 July 1979

STP34994S: Fire Response of Organic Polymeric Materials (Organic Materials in Fire: Combustibility) - 01 July 1979

STP674-EB: Composite Materials: Testing and Design (Fifth Conference) - 01 June 1979

STP36908S: Effects of Fiber Length on Elastic Moduli of Randomly-Oriented Chopped-Fiber Composites - 01 June 1979

STP36910S: A Model for Correlating Damage and Ultrasonic Attenuation in Composites - 01 June 1979

STP36912S: Test Methods for Fiber Tensile Strength, Composite Flexural Modulus, and Properties of Fabric-Reinforced Laminates - 01 June 1979

STP36907S: Fatigue Data on a Variety of Nonwoven Glass Composites for Helicopter Rotor Blades - 01 June 1979

STP36900S: Advanced Composite Material Applications to F-14A Structure - 01 June 1979

STP36901S: Characterization of Graphite/Epoxy Laminates for Aeroelastic Tailoring - 01 June 1979

STP36903S: Design Allowables of Advanced Composites Determined by Use of a Computer Data Bank System - 01 June 1979

STP34964S: Microtus Dry Bait Laboratory Efficacy Test Method - 01 June 1979

STP680-EB: Vertebrate Pest Control and Management Materials - 01 June 1979

STP34965S: Peromyscus Acute and Anticoagulant Dry Bait Laboratory Efficacy Test Method - 01 June 1979

STP34967S: Seed Impregnation with Rhodamine B Dye for Studying Wild Animals - 01 June 1979

STP34955S: Comparison of EPA Animal Biology Laboratory and Company Laboratory Efficacy Data for Federally Registered Rat and Mouse Baits - 01 June 1979

STP34970S: Indicator Bird Species for Toxicity Determinations: Is the Technique Usable in Test Method Development? - 01 June 1979

STP34972S: Two-Choice Preference Testing of Taste Repellency in Quelea quelea - 01 June 1979

STP34973S: Evaluating Curb as a Crop Repellent to West African Bird Pests - 01 June 1979

STP34956S: Procedures for Sampling Urban Rat Populations for Anticoagulant Resistance Evaluation - 01 June 1979

STP34976S: Evaluating Bird Protection to Mechanically Sown Rice Seed Treated with Methiocarb at Nianga, Senegal, West Africa - 01 June 1979

STP34977S: Improving Efficacy Testing of Bird-Repellent Seed Treatments - 01 June 1979

STP34978S: Laboratory Trials Using Fluorescent Dyes and Paints as Marking Agents for Quelea Studies - 01 June 1979

STP34979S: Testing for Daily Susceptibility Cycles in Birds Exposed to Avicides - 01 June 1979

STP34980S: Laboratory Method for Determining the Lethal Exposure Time50 (LET50) of Contact Avicides Used in Wicked-Perches - 01 June 1979

STP34981S: Experimental Design for Field Evaluation of Odor Attractants for Predators - 01 June 1979

STP34982S: Testing the Responses of Coyotes and Other Predators to Odor Attractants - 01 June 1979

STP34983S: Evaluation of Oral Central Nervous System Depressants in Coyotes - 01 June 1979

STP34984S: Proposed Efficacy Test for Dog Repellents Designed to Reduce Urination on Established Scent Posts - 01 June 1979

STP34985S: Rationale for Testing Vertebrate Pesticides and Devices in Actual Field Situations - 01 June 1979

STP34986S: The Effects of Environmental-Political Factors on Predator Research - 01 June 1979

STP34957S: Evaluation of Nonlethal Electrical Barriers for Crop Protection Against Rodent Damage - 01 June 1979

STP34958S: Rodent Population Activity Monitoring Methods for Evaluating Acute Rodenticide Tracking Powders - 01 June 1979

STP34959S: Test Method for Evaluating the Efficacy of Rodenticides Against Anticoagulant-Resistant Norway Rat - 01 June 1979

STP34960S: A Safe and Inexpensive Way of Making South Korean Villages Rodent-Free - 01 June 1979

STP34954S: Use of Burrows for Evaluating Rodenticide Efficacy in Urban Areas - 01 June 1979

STP34962S: Field Methods for Census Taking of Commensal Rodents in Rodenticide Evaluations - 01 June 1979

STP34963S: Age as a Factor in Rodent Susceptibility to Rodenticides—A Review - 01 June 1979

STP35797S: Solid-Particle Erosion of High-Technology Ceramics (Si3N4, Glass-Bonded Al203, and MgF2) - 01 January 1979

STP35806S: High-Speed Liquid Jet and Drop Impact on Brittle Targets - 01 January 1979

STP35807S: Damage Mechanisms in Polymers and Composites Under High-Velocity Liquid Impact - 01 January 1979

STP35808S: Erosion Damage in Carbon-Carbon Composites at Hypersonic Impact Velocities - 01 January 1979

STP35796S: Multiparticle Erosion of Pyrex Glass - 01 January 1979

STP35835S: Evaluation of Estimation Procedures Used in J-lntegral Testing - 01 January 1979

STP35836S: An Evaluation of Elastic-Plastic Methods Applied to Crack Growth Resistance Measurements - 01 January 1979

STP36905S: Effect of Near-Visual Damage on the Properties of Graphite/Epoxy - 01 January 1979

STP674-EB: Composite Materials: Testing and Design (Fifth Conference) - 01 January 1979

STP36906S: Ultimate Strength of High-Load-Capacity Composite Bolted Joints - 01 January 1979

STP36909S: Dispersion of Elastic Waves and the Nondestructive Testing of Composite Materials - 01 January 1979

STP36911S: Measurement of the Time-Temperature Dependent Dynamic Mechanical Properties of Boron/Aluminum Composites - 01 January 1979

STP36913S: Time-Temperature Behavior of a Unidirectional Graphite/Epoxy Composite - 01 January 1979

STP36914S: Viscoelastic Parameters of Epoxy Resin from Thermomechanical and Electrical Conductivity Measurements - 01 January 1979

STP36915S: Environmental Effects on Epoxy Matrix Composites - 01 January 1979

STP36916S: The Room Temperature Moisture Kinetics of Kevlar 49 Fabric/Epoxy Laminates - 01 January 1979

STP36917S: Prediction of Leakage Life and Deterioration in Water for Fiberglass Reinforced Plastic Vessels - 01 January 1979

STP36918S: Effect of Water Environment on Fatigue Behavior of Fiberglass Reinforced Plastics - 01 January 1979

STP36919S: Prediction of Moisture and Temperature Changes in Composites During Atmospheric Exposure - 01 January 1979

STP36920S: Fatigue Behavior and Life Prediction of Composite Laminates - 01 January 1979

STP36921S: Frequency Effect on the Fatigue Life of a Laminated Composite - 01 January 1979

STP36922S: Degradation and Sudden-Death Models of Fatigue of Graphite/Epoxy Composites - 01 January 1979

STP36923S: Statistical Aspects of Failure of Fibrous Materials - 01 January 1979

STP36924S: Properties of the Strength Distribution for Composite Materials - 01 January 1979

STP36925S: Thermographic Measurement of Fatigue Damage - 01 January 1979

STP36929S: Carbon-13 and Proton Nuclear Magnetic Resonance Spectroscopy of Thermosetting Polymers; Analysis of Tetraglycidyl Methylenedianiline/Diaminodiphenylsulfone Formulations - 01 January 1979

STP36930S: Physiochemical Analysis of Graphite-Epoxy Composite Systems - 01 January 1979

STP36931S: Fatigue Damage in Boron-Aluminum - 01 January 1979

STP36932S: Fatigue Effects on Delaminations and Strength Degradation in Graphite/Epoxy Laminates - 01 January 1979

STP36933S: Load History-Edge Damage Studies in Two Quasi-lsotropic Graphite Epoxy Laminates - 01 January 1979

STP36934S: Delamination Crack Growth in Unidirectional Fiber-Reinforced Composites under Static and Cyclic Loading - 01 January 1979

STP35902S: Fatigue Behavior of Polymers - 01 January 1979

STP35903S: Fatigue Fracture Micromechanisms in Engineering Plastics - 01 January 1979

STP35914S: Fatigue Damage Mechanisms in Composite Materials: A Review - 01 January 1979

STP35915S: Fatigue Mechanisms in Nickel and Cobalt-Base Eutectic Composites - 01 January 1979

STP37420S: Negative Stress Relaxation in Polyurethane Induced by Volume Shrinkage - 01 January 1979

STP34917S: Fatigue at Notches and the Local Strain and Fracture Mechanics Approaches - 01 January 1979

STP34924S: Theoretical and Experimental Analysis of Semi-Elliptical Surface Cracks Subject to Thermal Shock - 01 January 1979

STP34932S: Dynamic Photoelastic and Dynamic Finite Element Analyses of Polycarbonate Dynamic Tear Test Specimens - 01 January 1979

STP34940S: Strain Energy Release Rate Method for Predicting Failure Modes in Composite Materials - 01 January 1979

STP34941S: An Analysis of Tapered Double-Cantilever-Beam Fracture Toughness Test for Adhesive Joints - 01 January 1979

STP34942S: Analytical Modeling and ND Monitoring of Interlaminar Defects in Fiber-Reinforced Composites - 01 January 1979

STP34944S: Interpretations of Crack Surface Topologies for Poly(Vinyl Chloride) - 01 January 1979

STP36628S: Use of Indentation Fracture to Determine Fracture Toughness - 01 January 1979

STP36632S: Determination of Fracture Mechanics Parameters Through Fractographic Analysis of Ceramics - 01 January 1979

STP36634S: Fracture Toughness Testing of Alumina - 01 January 1979

STP36639S: Application of Fracture Mechanics Concepts to Structural Ceramics - 01 January 1979

STP36623S: Fracture Surface Energy Measurements by the Notch-Beam Technique - 01 January 1979

STP36625S: Crack Propagation Measurements on Glass: A Comparison Between Double Torsion and Double Cantilever Beam Specimens - 01 January 1979

STP27127S: Characterization of Surfaces in Wear Tests - 01 January 1979

STP701-EB: Wear Tests for Plastics: Selection and Use - 01 January 1979

STP27128S: Evaluation of PV Limits for Plastic Bearing Materials - 01 January 1979

STP27126S: Characteristics of Polymer Wear - 01 January 1979

STP27130S: Thin Film Endurance (Wear) Testing - 01 January 1979

STP27131S: Predicting Polymer Serviceability for Wear Applications - 01 January 1979

STP35809S: Influence of Materials Construction Variables on the Rain Erosion Performance of Carbon-Carbon Composites - 01 January 1979

STP36899S: Advanced Material Applications on the Trident I Missile - 01 January 1979

STP36926S: Physiochemical Characterization of Composites and Quality Control of Raw Materials - 01 January 1979

STP36928S: Applications of Fourier Transform Infrared Spectroscopy to Quality Control of the Epoxy Matrix - 01 January 1979

STP36902S: Minimum Weight Design in Double-Layer Panels: Sheet Molding Compound versus Steel - 01 January 1979

STP36898S: Composites for Aerospace Applications - 01 January 1979

STP36904S: Design, Fabrication, and Nondestructive Evaluation of an Advanced Composite Foil Test Component (Tapered Box Beam) - 01 January 1979

STP39097S: Absorption Coefficient of NaF by Attenuated Total Reflection Spectroscopy - 01 January 1979

STP39118S: Multithreshold Damage Measurements on As2S3, As2Se3, and NaF at HF and DF Wavelengths - 01 January 1979

STP39099S: A Comparison of Bulk and Surface Absorptions in NaCl and KCl between 9.2 and 10.8 µm - 01 January 1979

STP39123S: Improved PbF2 Coatings for the Infrared - 01 January 1979

STP39124S: Graded Index Coatings of Cubic Thallium Iodide (TLI) and Lead Fluoride (PbF 2) - 01 January 1979

STP39128S: Computer Simulation of Laser Damage Morphology in the Alkali-Halides - 01 January 1979

STP39132S: Frequency Dependence of Breakdown Fields in Single-Crystal NaCl and KCl - 01 January 1979

STP39103S: Piezo-Optic Coefficients of Some Neodymium Doped Laser Glasses and Single Crystals of CaF2, BaF2 and SrF2 - 01 January 1979

STP39104S: Refractive Index of Strontium Fluoride - 01 January 1979

STP39105S: The Development of Fluorides for High Power Laser Optics - 01 January 1979

STP39106S: Optical Properties of KCl Forged between Optically Polished Dies - 01 January 1979

STP39107S: Bulk Optical Properties of Fine Grained Forged Calcium Fluoride - 01 January 1979

STP39108S: CW Laser Damage in AR Coated Alkaline Earth Fluorides at 3.8 µm - 01 January 1979

STP39109S: Lattice Absorption, Phonon Assignments, and Image Spoiling Properties of Cvd ZnS in the Infrared - 01 January 1979

STP27129S: Test Methods for Automotive and Truck Friction Materials - 01 January 1979

STP25606S: Surface Analysis of Polymer and Glass - 01 January 1978

STP38101S: Fractographic Analysis of Ceramics - 01 January 1978

STP34861S: Inelastic Micromechanical Analysis of Graphite/Epoxy Composites Subjected to Hygrothermal Cycling - 01 January 1978

STP658-EB: Advanced Composite Materials—Environmental Effects - 01 January 1978

STP34862S: Influence of Two-Dimensional Hygrotheramal Gradients on Interlaminar Stresses Near Free Edges - 01 January 1978

STP34863S: Integrated Theory for Predicting the Hygrothermomechanical Response of Advanced Composite Structural Components - 01 January 1978

STP34864S: Environmental Synergism and Simulation in Resin Matrix Composites - 01 January 1978

STP34865S: Moisture-Altered Viscoelastic Response of Graphite/Epoxy Composites - 01 January 1978

STP34856S: Diffusion of Water Vapor in Graphite/Epoxy Composites - 01 January 1978

STP34866S: Influence of Moisture Absorption and Elevated Temperature on the Dynamic Behavior of Resin Matrix Composites: Preliminary Results - 01 January 1978

STP34867S: Analysis and Test of Graphite/Epoxy Sandwich Panels Subjected to Internal Pressures Resulting from Absorbed Moisture - 01 January 1978

STP34868S: Oxidative Resistance of Carbon Fibers and Their Composites - 01 January 1978

STP34869S: “Instantaneous” Effect of Internal Moisture Conditions on Strength of Glass-Fiber-Reinforced Plastics - 01 January 1978

STP34855S: Effect of Moisture on Epoxy Resins and Composites - 01 January 1978

STP34857S: Some Anomalies Associated with Moisture Diffusion in Epoxy Matrix Composite Materials - 01 January 1978

STP34858S: Effect of an External Stress on Moisture Diffusion and Degradation in a Graphite-Reinforced Epoxy Laminate - 01 January 1978

STP34859S: Fundamental and Operational Glass Transition Temperatures of Composite Resins and Adhesives - 01 January 1978

STP34860S: Swelling of Composite Laminates - 01 January 1978

STP38627S: Adhesion of Thin Plasma Polymer Films to Plastics - 01 January 1978

STP640-EB: Adhesion Measurement of Thin Films, Thick Films, and Bulk Coatings - 01 January 1978

STP38628S: Electromagnetic Tensile Adhesion Test Method - 01 January 1978

STP38629S: Measurements of Film-Substrate Bond Strength by Laser Spallation - 01 January 1978

STP38630S: Hardness and Adhesion of Filmed Structures as Determined by the Scratch Technique - 01 January 1978

STP38621S: Locus of Failure and Its Implications for Adhesion Measurements - 01 January 1978

STP38635S: Adhesion of Thick Films to Ceramic and Its Measurement by Both Destructive and Nondestructive Means - 01 January 1978

STP38638S: Adhesion of Flame-Sprayed Coatings - 01 January 1978

STP38640S: Adhesion Testing of Deposit-Substrate Combinations - 01 January 1978

STP38622S: Problems in Adhesion Measurement - 01 January 1978

STP38643S: Measuring the Temperature Dependence of the Strength of Metal-Polymer Joints - 01 January 1978

STP38623S: Experimental Methods to Determine Locus of Failure and Bond Failure Mechanism in Adhesive Joints and Coating-Substrate Combinations - 01 January 1978

STP38624S: Thin-film Adhesion and Adhesive Failure—A Perspective - 01 January 1978

STP38620S: Adhesion Measurement: Recent Progress, Unsolved Problems, and Prospects - 01 January 1978

STP38625S: Use of Fracture Mechanics Concepts in Testing of Film Adhesion - 01 January 1978

STP38626S: Techniques for Measuring Adhesive Energies in Metal/Ceramic Systems - 01 January 1978

STP643-EB: Quantitive Surface Analysis of Materials - 01 January 1978

STP35714S: Assessment Problems of Whether or Not to Treat Oil Spills - 01 January 1978

STP659-EB: Chemical Dispersants for the Control of Oil Spills - 01 January 1978

STP35715S: Oil Spill Control Chemicals—Oil Spill Control A Current View - 01 January 1978

STP35716S: Physical and Chemical Behavior of Small Crude Oil Slicks on the Ocean - 01 January 1978

STP35717S: Dispersant Field Trials in Canadian Waters—Use of Hovercraft as a Dispersant Spraying Platform - 01 January 1978

STP35718S: Evaluation of Equipment for Aerial Spraying of Oil Dispersant Chemicals - 01 January 1978

STP35719S: Effect of a Chemical Dispersant on Microbial Utilization of Petroleum Hydrocarbons - 01 January 1978

STP35720S: Chemical Analysis of Dispersed Oil in the Water Column - 01 January 1978

STP35707S: Toxicity Testing in the United Kingdom for the Evaluation of Oil Slick Dispersants - 01 January 1978

STP35721S: Drop Size Distributions in a Treated Oil-Water System - 01 January 1978

STP35722S: Practical Experience of Dispersant Usage - 01 January 1978

STP35723S: Dispersant Usage for Offshore Oil Spills - 01 January 1978

STP35724S: A System for the Application of Dispersants to the Problems of Oil Spill Clearance - 01 January 1978

STP35725S: Effects of Dispersant Use on Shore Life - 01 January 1978

STP35726S: Apparatus for Application of Chemical Dispersants on Open Sea - 01 January 1978

STP35727S: Ecological Effects of Dispersants in the United Kingdom - 01 January 1978

STP35708S: A Small-Scale Laboratory Dispersant Effectiveness Test - 01 January 1978

STP35709S: Acute Aquatic Toxicity and Dispersing Effectiveness of Oil Spill Dispersants: Results of a Canadian Oil Dispersant Testing Program (1973 to 1977) - 01 January 1978

STP35706S: Some Observations on the Mechanism and Chemistry Aspects of Chemical Dispersion - 01 January 1978

STP35710S: Logistic Requirements for Aerial Application of Oil Spill Dispersants - 01 January 1978

STP35711S: Development of an Oil Dispersant Spraying System - 01 January 1978

STP35712S: Chemical Control of Oil Spills and Hazards - 01 January 1978

STP35713S: Some Guidelines for Oil-Spill Control in Coastal Environments, Based on Field Studies of Four Oil Spills - 01 January 1978

STP26938S: Structural Design Significance of Tension-Tension Fatigue Data on Composites - 01 January 1977

STP617-EB: Composite Materials: Testing and Design (Fourth Conference) - 01 January 1977

STP26939S: Evaluation of Selected High-Temperature Thermoplastic Polymers for Advanced Composite and Adhesive Applications - 01 January 1977

STP26940S: Development of Multidirectional Fiber-Reinforced Plastics - 01 January 1977

STP26941S: Acoustic Emission Response Characteristics of Metal Matrix Composites - 01 January 1977

STP26942S: Compression Testing of Large Gage Length Composite Coupons - 01 January 1977

STP26933S: An Experimental Study of the Fracture Behavior of Laminated Graphite/Epoxy Composites - 01 January 1977

STP26943S: Nondestructive Tests for Shear Strength Degradation of a Graphite-Epoxy Composite - 01 January 1977

STP26944S: Failure Analysis of the Split-D Test Method - 01 January 1977

STP26945S: Longitudinal Residual Stresses in Boron Fibers - 01 January 1977

STP26946S: Effect of Stacking Sequence on the Notched Strength of Laminated Composites - 01 January 1977

STP26947S: An Analysis Model for Spatially Oriented Fiber Composites - 01 January 1977

STP26948S: Empirical Crippling Analysis of Graphite/Epoxy Laminated Plates - 01 January 1977

STP26949S: Reliability Prediction for Composites Under Periodic Proof Tests in Service - 01 January 1977

STP26950S: A Perturbation Solution for Interlaminar Stresses In Bidirectional Laminates - 01 January 1977

STP26951S: Evaluation of Composite Curing Stresses - 01 January 1977

STP26952S: Lamination Residual Strains and Stresses in Hybrid Laminates - 01 January 1977

STP26953S: Tensile and Compressive Behavior of Borsic/Aluminum - 01 January 1977

STP26955S: Charpy Impact of Unidirectional Graphite/Aramid/Epoxy Hybrid Composites - 01 January 1977

STP26956S: Impact Damage in Graphite-Fiber-Reinforced Composites - 01 January 1977

STP26934S: Effect of Time at Load on Fatigue Response of [(0/ ± 45/90)s]2 T300/5208 Graphite-Epoxy Laminate - 01 January 1977

STP26957S: Impact Response of Polymer-Matrix Composite Materials - 01 January 1977

STP26958S: An Analytical Method for Evaluation of Impact Damage Energy of Laminated Composites - 01 January 1977

STP26959S: Time-Temperature-Stress Dependence of Boron Fiber Deformation - 01 January 1977

STP26960S: Effects of Themal Cycling on the Properties of Graphite-Epoxy Composites - 01 January 1977

STP26961S: Moisture Effects in Epoxy Matrix Composites - 01 January 1977

STP26962S: Environmental Sensitivity Tests of Graphite-Epoxy Bolt Bearing Properties - 01 January 1977

STP26963S: Moisture Absorption and Desorption in Epoxy Composite Laminates - 01 January 1977

STP26935S: Preliminary Development of a Fundamental Analysis Model for Crack Growth in a Fiber Reinforced Composite Material - 01 January 1977

STP26932S: Fracture Resistance Characterization of Graphite/Epoxy Composites - 01 January 1977

STP26936S: Fatigue of Notched Fiber Composite Laminates: Analytical and Experimental Evaluation - 01 January 1977

STP26937S: Delamination in Quasi-Isotropic Graphite-Epoxy Laminates - 01 January 1977

STP618-EB: Flameless Atomic Absorption Analysis: An Update - 01 January 1977

STP26968S: Inductively Coupled Plasma-Atomic Emission Spectroscopy: An Alternative Approach to “Flameless” Atomic Absorption Spectroscopy - 01 January 1977

STP26966S: Nonflame Atomic Absorption with a Constant Temperature Atomizer - 01 January 1977

STP26969S: Use of a Unique Flameless Atomic Absorption Atomizer for the Analysis of Certain Difficult Samples - 01 January 1977

STP26970S: Use of Molybdenum in Eliminating Matrix Interferences in Flameless Atomic Absorption - 01 January 1977

STP27383S: Analysis of a Rapidly Propagating Crack Using Finite Elements - 01 January 1977

STP27387S: Measurements of Dynamic Stress Intensity Factors for Fast Running and Arresting Cracks in Double-Cantilever-Beam Specimens - 01 January 1977

STP27392S: Relation Between Crack Velocity and the Stress Intensity Factor in Birefringent Polymers - 01 January 1977

STP27396S: An Investigation of Axisymmetric Crack Propagation - 01 January 1977

STP27382S: Dynamic Finite Element and Dynamic Photoelastic Analyses of Crack Arrest in Homalite-100 Plates - 01 January 1977

STP35547S: Fracture Toughness of Random Glass Fiber Epoxy Composites: An Experimental Investigation - 01 January 1977

STP27973S: Effects of Moisture and Fatigue on the Residual Mechanical Properties of S-Glass/Graphite/Epoxy Hybrid Composites - 01 January 1977

STP636-EB: Fatigue of Filamentary Composite Materials - 01 January 1977

STP27974S: Effect of Temperature on Fatigue Response of Surface-Notched [(0/ ± 45/0)s]3 Graphite/Epoxy Laminate - 01 January 1977

STP27975S: Fatigue of Composites at Cryogenic Temperatures - 01 January 1977

STP27976S: Evaluation of Flawed Composite Structure Under Static and Cyclic Loading - 01 January 1977

STP27977S: Frequency Effects on a Stiffness-Based Fatigue Failure Criterion in Flawed Composite Specimens - 01 January 1977

STP27978S: Fatigue Behavior of Composites Under Different Loading Modes - 01 January 1977

STP27981S: Fatigue and Proof-Testing of Unidirectional Graphite/Epoxy Composite - 01 January 1977

STP27968S: Notched and Unnotched Fatigue Behavior of Angle-Ply Graphite/Epoxy Composites - 01 January 1977

STP27967S: Effect of Compression on Fatigue Properties of a Quasi-Isotropic Graphite/Epoxy Composite - 01 January 1977

STP27969S: Mechanisms of Fatigue Crack Growth in Boron/Aluminum Laminates - 01 January 1977

STP27970S: A Study of Fatigue Damage in Composites by Nondestructive Testing Techniques - 01 January 1977

STP27971S: Fatigue Damage of Notched Boron/Epoxy Laminates Under Constant-Amplitude Loading - 01 January 1977

STP27972S: Improvement of Fatigue Life of Boron/Epoxy Laminates by Heat Treatment Under Load - 01 January 1977

STP26954S: Boron/Aluminum Skins for the DC-10 Aft Pylon - 01 January 1977

STP27060S: Chemosterilant Evaluation in Coyotes: Parameters for Animal Selection and Laboratory Methodology - 01 January 1977

STP625-EB: Test Methods for Vertebrate Pest Control and Management Materials - 01 January 1977

STP27061S: Test Methods for Determining the Efficacy of Coyote Attractants and Repellents - 01 January 1977

STP27062S: Proposed Efficacy Test for Aerosol Dog Repellents that Are Designed to Reduce Damage to Garbage Bags - 01 January 1977

STP27063S: Considerations in the Application of Aversive Conditioning - 01 January 1977

STP27064S: Guidelines for Field Evaluations of Repellents to Control Deer Damage to Reforestation - 01 January 1977

STP27065S: A Method for Evaluating Coyote Scent Baits - 01 January 1977

STP27066S: Standard Guideline for the Use and Development of Sodium Monofluoroacetate (Compound 1080) as a Predacide (ASTM Designation E 590-76) - 01 January 1977

STP27067S: A Cage Test for the Evaluation of House Finch Repellents for Grapes - 01 January 1977

STP27068S: Field Testing a Bird Repellent Chemical on Cereal Crops - 01 January 1977

STP27069S: Learned Aversion in Wild Birds: A Method for Testing Comparative Acute Repellency - 01 January 1977

STP27070S: Considerations in Testing Vertebrate Pesticides To Be Used in Disease-Control Activities - 01 January 1977

STP27071S: Testing Effectiveness of a Chemical as a Bird Repellent on Pearl Millet in Somalia - 01 January 1977

STP27072S: Efficacy Experiments Involving Avian Pest Control Materials: Design Considerations Imposed by the Scientific Method - 01 January 1977

STP27073S: Use of Male Coturnix Quail in the Laboratory Development of Avian Chemosterilants - 01 January 1977

STP27050S: An Exclosure Method for Quantifying Vertebrate Pesticide Residues from Rangeland Vegetation - 01 January 1977

STP27074S: A Simplified Method to Evaluate the Efficacy Potential of Spray-on Bird Repellents Under Simulated Natural Conditions in Cornfields - 01 January 1977

STP27051S: A Device for Bioassay of Response to Olfactory Stimuli in Wild Rodents - 01 January 1977

STP27052S: A Method for Assessing Deposits of Aerially Applied Aqueous Pest Control Agents - 01 January 1977

STP27053S: Bioassay Methods Guilding the Development of a Big Game Repellent - 01 January 1977

STP27048S: Evaluations of Control Agents for Conifer Seed Protection - 01 January 1977

STP27055S: Rat and Mouse Acute Liquid Bait Test Method - 01 January 1977

STP27056S: Field Testing Method Used in Evaluating Acute Commensal Rodenticides - 01 January 1977

STP27057S: Cage Units and Procedures Designed for the Testing of Toxic Rodent Tracking Powders - 01 January 1977

STP27058S: Equipment and Methods Available for Measuring the Behavioral Response of Rodents to Odors - 01 January 1977

STP27059S: Techniques for the Evaluation of Potential Rabbit (Oryctolagus cuniculus) Chemosterilants - 01 January 1977

STP27085S: Use of the Short-Beam Shear Test for Quality Control of Graphite-Polyimide Laminates - 01 January 1977

STP27397S: Measurement of Fast Crack Growth in Metals and Nonmetals - 01 January 1977

STP27956S: A Corrosion Inhibitor Formulated with Calcium Nitrite for Use in Reinforced Concrete - 01 January 1977

STP27979S: Mechanical Properties of Carbon Fiber-Reinforced Polymethylmethacrylate for Surgical Implant Applications - 01 January 1977

STP27980S: Designing for Integrity in Long-Life Composite Aircraft Structures - 01 January 1977

STP42075S: Chapter 12—Petroleum Oils for Rubber - 01 January 1977

STP33916S: Use of a Low-Energy Van de Graaff Accelerator in Neutron Radiography of Encased Explosives - 01 January 1976

STP33941S: A Simple Method for Measuring Tearing Energy of Nicked Rubber Strips - 01 January 1976

STP28640S: Fracture Toughness of ATJ-S Graphite and CVD Carbon-Carbon Composites at Elevated Temperatures - 01 January 1976

STP28647S: Note on the Dependence of Crack Velocity on Driving Force for an Epoxy Adhesive - 01 January 1976

STP28656S: Fracture Toughness Testing of Glassy Plastics - 01 January 1976

STP28638S: Assessment of Strength-Probability-Time Relationships in Ceramics - 01 January 1976

STP28639S: Application of Fracture Mechanics to the Thermostructural Failure of Graphite - 01 January 1976

STP602-EB: Environmental Effects on Advanced Composite Materials - 01 January 1976

STP27779S: Effects of Thermal Cycling Environment on Graphite/Epoxy Composites - 01 January 1976

STP27781S: Effect of Natural Weathering on the Mechanical Properties of Graphite/Epoxy Composite Materials - 01 January 1976

STP27782S: Influence of Outdoor Weathering on Dynamic Mechanical Properties of Glass/Epoxy Laminate - 01 January 1976

STP27803S: Mechanical Behavior Model for Graphites - 01 January 1976

STP27858S: Determination of Plastic or Creep Strains by Grids - 01 January 1976

STP27884S: Thermal Fatigue and Its Failure Prediction for Brittle Ceramics - 01 January 1976

STP42535S: Handbook of Vapor Degreasing - 01 January 1976

STP310A-EB: Handbook of Vapor Degreasing - 01 January 1976

STP41405S: Pitting Caused by Chlorides or Sulfates in Organic Media - 01 January 1976

STP27778S: Flight Simulation Testing Equipment for Composite Material Systems - 01 January 1976

STP27777S: Program Definition and Preliminary Results of a Long-Term Evaluation Program of Advanced Composites for Supersonic Cruise Aircraft Applications - 01 January 1976

STP27780S: Effects of Graphite/Epoxy Composite Materials on the Corrosion Behavior of Aircraft Alloys - 01 January 1976

STP27814S: Urethane Sealants - 01 January 1976

STP606-EB: Building Seals and Sealants - 01 January 1976

STP27807S: Polysulfide Rubber - 01 January 1976

STP27815S: A Review of Sealant Specifications Throughout the World - 01 January 1976

STP27816S: A Sealant Applicator's Viewpoint - 01 January 1976

STP27817S: Hot Melt Rubberized Asphalt Membranes - 01 January 1976

STP27818S: Neoprene (Polychloroprene) Membranes - 01 January 1976

STP27819S: Cold-Applied Fluid Elastomeric Waterproofing Membranes - 01 January 1976

STP27820S: A Membrane Applicator's Viewpoint - 01 January 1976

STP27821S: Lock-Strip Glazing Gaskets - 01 January 1976

STP27822S: Compression Seals - 01 January 1976

STP27823S: Cast Iron Soil Pipe Gaskets - 01 January 1976

STP27824S: Compression Seals - 01 January 1976

STP27825S: Back-Up Materials - 01 January 1976

STP27826S: Polyurethane-Polyepoxide Sealant - 01 January 1976

STP27806S: Oil and Resin Base (Oleoresinous) Caulking Compounds - 01 January 1976

STP27808S: Polysulfide Sealants - 01 January 1976

STP27809S: Solvent-Base Acrylic Sealants - 01 January 1976

STP27810S: Acrylic Sealants - 01 January 1976

STP27811S: Solvent-Base Acrylic Sealants - 01 January 1976

STP27812S: Chlorosulfonated Polyethylene Sealants - 01 January 1976

STP27813S: Acrylic Emulsion Sealants - 01 January 1976

STP27870S: Container Changes—Quality and Quantity - 01 January 1976

STP28679S: Retardation of Crack Propagation for D6AC High-Strength, Low-Alloy Steel in Aqueous Media by Addition of Oxidizing Inhibitors - 01 January 1976

STP33153S: Impact Strength and Toughness of Fiber Composite Materials - 01 January 1975

STP568-EB: Foreign Object Impact Damage To Composites - 01 January 1975

STP33154S: Methods for Improving the Impact Resistance of Composite Materials - 01 January 1975

STP33155S: Failure Mechanisms in Composite Plates Impacted by Blunt-Ended Penetrators - 01 January 1975

STP33156S: Behavior of Laminated Composite Plates Subjected to Impact - 01 January 1975

STP33157S: Response of Isotropic and Composite Materials to Particle Impact - 01 January 1975

STP33159S: Analysis of Impact Stresses in Composite Plates - 01 January 1975

STP33149S: Impact Damage Tolerance of Graphite/Epoxy Sandwich Panels - 01 January 1975

STP33152S: Residual Strength Characterization of Laminated Composites Subjected to Impact Loading - 01 January 1975

STP33168S: Effects of Frequency on the Mechanical Response of Two Composite Materials to Fatigue Loads - 01 January 1975

STP569-EB: Fatigue of Composite Materials - 01 January 1975

STP33171S: Fatigue and Shakedown in Metal Matrix Composites - 01 January 1975

STP33172S: Fatigue Failure Mechanisms in a Unidirectionally Reinforced Composite Material - 01 January 1975

STP33173S: High Strain Fatigue in a Ni(Cr)-TaC Fibrous Eutectic - 01 January 1975

STP33174S: Fatigue Behavior of an Ag3Mg-AgMg Eutectic Composite - 01 January 1975

STP33175S: Effects of Environment on the Fatigue of Graphite-Epoxy Composites - 01 January 1975

STP33176S: Flexural-Fatigue Evaluation of Aluminum-Alloy and Kraft-Paper Honeycomb-Sandwich Beams - 01 January 1975

STP33177S: Foreign Object Damage and Fatigue Interaction in Unidirectional Boron/Aluminum-6061 - 01 January 1975

STP33178S: Axial Fatigue Properties of Metal Matrix Composites - 01 January 1975

STP33163S: Fatigue Crack Propagation in 0°/90° E-Glass/Epoxy Composites - 01 January 1975

STP33179S: Debond Propagation in Composite-Reinforced Metals - 01 January 1975

STP33180S: Realism in Fatigue Testing: The Effect of Flight-by-Flight Thermal and Random Load Histories on Composite Bonded Joints - 01 January 1975

STP33164S: Reducing the Effect of Water on the Fatigue Properties of S-Glass Epoxy Composites - 01 January 1975

STP33165S: Fatigue Crack Growth in Dual Hardness Steel Armor - 01 January 1975

STP33162S: Fatigue Crack Propagation Behavior of the Ni-Ni3 Cb Eutectic Composite - 01 January 1975

STP33166S: Microcrack Growth in Graphite Fiber-Epoxy Resin Systems During Compressive Fatigue - 01 January 1975

STP33167S: Nonlinear Response of Boron/Aluminum Angleplied Laminates Under Cyclic Tensile Loading: Contributing Mechanisms and Their Effects - 01 January 1975

STP32302S: Reliability Aspects of a Composite Bolted Scarf Joint - 01 January 1975

STP580-EB: Composite Reliability - 01 January 1975

STP32303S: Shear Property Measurements of Adhesives in Composite Material Bonded Joints - 01 January 1975

STP32305S: Evaluation of Adhesive-Bonded Joints in Housing Components of Glass Fiber-Reinforced Polyester Laminate - 01 January 1975

STP32306S: Vibration Testing as a Nondestructive Test Tool for Composite Materials - 01 January 1975

STP32307S: Application of a Special X-Ray Nondestructive Testing Technique for Monitoring Damage Zone Growth in Composite Laminates - 01 January 1975

STP32308S: Acoustic Emission from Stress Rupture and Fatigue of an Organic Fiber Composite - 01 January 1975

STP32309S: Spectrum Analysis of Acoustic Emissions from Boron-Aluminum Composites - 01 January 1975

STP32310S: Damage Analysis in Composite Materials - 01 January 1975

STP32311S: Optimization of the Thermal Shock Resistance of Carbon-Carbon Composites - 01 January 1975

STP32312S: Kinetics of Environmental Degradation in Graphite-Epoxy Laminates - 01 January 1975

STP32313S: Stress Rupture of Glass-Epoxy Composites: Environmental and Stress Effects - 01 January 1975

STP32314S: Reliability of Composite Zero-Expansion Structures for Use in Orbital Environment - 01 January 1975

STP32315S: Temperature Dependence of the Complex Modulus for Fiber-Reinforced Materials - 01 January 1975

STP32316S: Prediction of Transverse Strength and Scatter in Test Data for Unidirectional Composites - 01 January 1975

STP32317S: A Computational Procedure to Analyze Metal Matrix Laminates with Nonlinear Lamination Residual Strains - 01 January 1975

STP32318S: Measurement of Residual Strains in Boron-Epoxy and Glass-Epoxy Laminates - 01 January 1975

STP32319S: Reducing Variability in Composite Tensile-Strength Properties - 01 January 1975

STP32298S: Probabilistic Design of Composite Structures - 01 January 1975

STP32320S: Compressive Strength of Fiber-Reinforced Composite Materials - 01 January 1975

STP32321S: Creep Analysis of Laminates - 01 January 1975

STP32322S: Composite Matrix Fatigue Crazing—Detection and Measurement - 01 January 1975

STP32323S: Stress-Rupture Strength and Microstructural Stability of W-Hf-C Wire-Reinforced Superalloy Composites - 01 January 1975

STP32324S: Frequency Effects on Flawed-Composite Fatigue Reliability - 01 January 1975

STP32325S: Some Observations on the Dynamic Fracture Behavior of Carbon Fiber-strengthened Epoxy Resin - 01 January 1975

STP32326S: Impact Damage Effects on Boron-Aluminum Composites - 01 January 1975

STP32327S: Molecular Correlations with Fracture in Fibers and Granular-Filled Composites - 01 January 1975

STP32328S: Determination of Fracture Strength in Orthotropic Graphite-Epoxy Laminates - 01 January 1975

STP32329S: Fracture Behavior of Unidirectionally Solidified Ti-Ti5Ge3 Eutectic Composites - 01 January 1975

STP32330S: Fatigue Crack Propagation Rates in Woven and Nonwoven Fiber Glass Laminates - 01 January 1975

STP32331S: Fracture Behavior of Thornel 300/5208 Graphite-Epoxy Laminates—Part 1: Unnotched Laminates - 01 January 1975

STP32332S: Fatigue, Creep, and Impact Resistance of Aramid Fiber Reinforced Composites - 01 January 1975

STP32299S: Structural Integrity Assessment of Filament-Wound Components - 01 January 1975

STP32333S: Thermal Conductivity of High-Modulus Carbon Fibers - 01 January 1975

STP32334S: Thermoelastic Expansion of Graphite-Epoxy Unidirectional and Angle-Ply Composites - 01 January 1975

STP32335S: Properties of Filamentary-Reinforced Composites at Cryogenic Temperatures - 01 January 1975

STP32297S: Some Approaches to Assessing Failure Probabilities of Redundant Structures - 01 January 1975

STP32336S: Tensile Properties of an Ultrahigh-Strength Graphite Fiber in an Epoxy Matrix - 01 January 1975

STP32337S: Heat-Treatable Cladding for New Aluminum Alloy 7050-T76 Sheet - 01 January 1975

STP32300S: Statistical Analysis of Flaw Strength Spectra of High-Modulus Fibers - 01 January 1975

STP32301S: Evaluation of an Accelerated Characterization Technique for Reliability Assessment of Adhesive Joints - 01 January 1975

STP34795S: Uniaxial Failure of Composite Laminates Containing Stress Concentrations - 01 January 1975

STP593-EB: Fracture Mechanics of Composites - 01 January 1975

STP34796S: Fracture of Composite Compact Tension Specimens - 01 January 1975

STP34797S: Fracture Mechanics Correlation of Boron/Aluminum Coupons Containing Stress Risers - 01 January 1975

STP34798S: Rate and Time Dependent Failure of Structural Adhesives - 01 January 1975

STP34799S: Crack Arrestment of Laminated Composites - 01 January 1975

STP34800S: Concepts for Crack Arrestment in Composites - 01 January 1975

STP34791S: Three-Dimensional Solution for a Through-Thickness Crack in a Cross-Plied Laminate - 01 January 1975

STP34790S: Three-Dimensional Analysis of Laminar Composites with Through Cracks - 01 January 1975

STP34792S: Threeui-Dimensional Solution for a Through-Thickness Crack with Crack Tip Damage in a Cross-Plied Laminate - 01 January 1975

STP34793S: A Finite-Element Program for Fracture Mechanics Analysis of Composite Material - 01 January 1975

STP34794S: Mode I Stress Intensity Factors for Symmetrically-Cracked Orthotropic Strips - 01 January 1975

STP33158S: Studies on the Impact Structural Damage of Composite Blades - 01 January 1975

STP33148S: Comparisons of the Ballistic Impact Response of Metals and Composites for Military Aircraft Applications - 01 January 1975

STP33150S: Impact Response of Graphite-Epoxy Flat Laminates Using Projectiles that Simulate Aircraft Engine Encounters - 01 January 1975

STP33151S: Comparison of Residual Strength of Composite and Metal Structures after Ballistic Damage - 01 January 1975

STP32252S: Detection and Location of Flaw Growth in Metallic and Composite Structures - 01 January 1975

STP39008S: Guidelines for Quantitative Liquid-Liquid Extraction of Organophosphate Pesticides from Water - 01 January 1975

STP39009S: Pesticide Residue Screening Methods Utilizing Multidetector Configurations - 01 January 1975

STP39012S: Liquid Chromatography of Carbamate Pesticides - 01 January 1975

STP32304S: Measurement of Thermal and Mechanical Properties of Graphiteepoxy Composites for Precision Applications - 01 January 1975

STP33895S: Glass in Solid Waste Recovery Systems - 01 January 1975

STP33896S: Opportunities for Plastics in Resource Recovery - 01 January 1975

STP32210S: Structural Fatigue Testing - 01 October 1974

STP32202S: Considerations in the Design of the Fatigue Test Program - 01 October 1974

STP32206S: Specimens for Material Fatigue Testing - 01 October 1974

STP35485S: A Correlation Study of Finite-Element Modeling for Vibrations of Composite Material Panels - 01 January 1974

STP546-EB: Composite Materials: Testing and Design (Third Conference) - 01 January 1974

STP35486S: Probabilistic Concepts in Modeling the Tensile Strength Behavior of Fiber Bundles and Unidirectional Fiber/Matrix Composites - 01 January 1974

STP35487S: Debonding of Rigid Inclusions in Plane Elastostatic - 01 January 1974

STP35488S: On the Determination of Physical Properties of Composite Materials by a Three-Dimensional Finite-Element Procedure - 01 January 1974

STP35489S: Laminate Strength—A Direct Characterization Procedure - 01 January 1974

STP35490S: Stress-Rupture Behavior of Strands of an Organic Fiber/Epoxy Matrix - 01 January 1974

STP35491S: Effect of Temperature and Strain Rate on the Tensile Properties of Boron-Aluminum and Boron-Epoxy Composites - 01 January 1974

STP35492S: Methods of Fiber and Void Measurement in Graphite/Epoxy Composites - 01 January 1974

STP35493S: Evaluation of Experimental Methods for Determining Dynamic Stiffness and Damping of Composite Materials - 01 January 1974

STP35494S: Effect of Salt Water and High-Temperature Exposure on Boron-Aluminum Composites - 01 January 1974

STP35495S: Effects of Moisture on the Properties of High-Performance Structural Resins and Composites - 01 January 1974

STP35496S: Materials Parameters that Govern the Erosion Behavior of Polymeric Composites in Subsonic Rain Environments - 01 January 1974

STP35481S: Analysis of the Flexure Test for Laminated Composite Materials - 01 January 1974

STP35497S: Lightning Protection for Composites - 01 January 1974

STP35498S: Torsional Fatigue Behavior of Unidirectional Resin Matrix Composites - 01 January 1974

STP35499S: Geometric and Loading Effects on Strength of Composite Plates with Cutouts - 01 January 1974

STP35500S: Crack-Tip Deformation Measurements Accompanying Fracture in Fibrous and Laminar Composites - 01 January 1974

STP35501S: Uniaxial, Biaxial, and Fatigue Properties of Polyester Fiber Glass - 01 January 1974

STP35502S: Interlaminar Shear Fatigue Characteristics of Fiber-Reinforced Composite Materials - 01 January 1974

STP35503S: Mechanical and Physical Properties of Advanced Composites - 01 January 1974

STP35504S: Evaluation of Graphite Fiber Reinforced Plastic Composites for Use in Unlubricated Sliding Bearings - 01 January 1974

STP35482S: Methods for Determining the Elastic and Viscoelastic Response of Composite Materials - 01 January 1974

STP35505S: Wear of Glass Fiber Reinforced Composite Material - 01 January 1974

STP35506S: Effect of Filament-Matrix Interdiffusion on the Fatigue Resistance of Boron-Aluminum Composite - 01 January 1974

STP35507S: The Notched Tensile Behavior of Metal Matrix Composites - 01 January 1974

STP35508S: Reinforcement of Metals with Advanced Filamentary Composites - 01 January 1974

STP35509S: Comparison of the Mechanical Behavior of Filamentary Reinforced Aluminum and Titanium Alloys - 01 January 1974

STP35510S: Plastic Deformation Processing and Compressive Failure Mechanism in Aluminum Composite Materials - 01 January 1974

STP35511S: Tolerance of Advanced Composites to Ballistic Damage - 01 January 1974

STP35480S: Microbuckling of Lamina-Reinforced Composites - 01 January 1974

STP35515S: Experimental Stress Intensity Factor Measurements in Orthotropic Composites - 01 January 1974

STP35483S: Analysis, Testing, and Design of Filament Wound, Carbon-Carbon Burst Tubes - 01 January 1974

STP35484S: Elastic Torsional Buckling of Thin-Walled Composite Cylinders - 01 January 1974

STP38953S: New Low Temperature Test Equipment for Rubbers - 01 January 1974

STP553-EB: Rubber and Related Products: New Methods for Testing and Analyzing - 01 January 1974

STP38954S: Application of the Rheometrics Mechanical Spectrometer to Rubber Testing - 01 January 1974

STP38955S: A Review of Recent Developments in Forced Vibration Dynamic Testing of Elastomers - 01 January 1974

STP38957S: New Automatic Tensile Tester - 01 January 1974

STP38958S: Tire Cord Fatigue Studies Using a Modified SCEF Tester - 01 January 1974

STP38948S: Standardization of Mooney Viscometer and Oscillating-Disk Cure Meter - 01 January 1974

STP38949S: Measuring Dynamic Properties of Vulcanizates - 01 January 1974

STP38947S: Morphological Analysis of Carbon Black - 01 January 1974

STP38950S: Plasticity Retention Index — Its Measurement and Significance for Natural Rubber - 01 January 1974

STP38951S: Application of Pyrolysis-Gas Chromatography to Qualitative and Quantitative Analysis of Polymers - 01 January 1974

STP38952S: Standards and Standardization - 01 January 1974

STP33132S: Crack Approaching a Hole - 01 January 1974

STP32189S: Impact Testing of Carbon-Epoxy Composite Materials - 01 January 1974

STP32191S: An Analysis of Charpy Impact Testing as Applied to Cemented Carbide - 01 January 1974

STP38984S: Introductory Statement - 01 January 1974

STP564-EB: Some Fundamentals of Analytical Chemistry - 01 January 1974

STP38986S: Principles of Volumetric Analysis - 01 January 1974

STP38987S: Atomic Absorption Spectrometry— General Considerations for the Application of Experimental Techniques - 01 January 1974

STP38988S: Dissolution of Metals for Analysis - 01 January 1974

STP38985S: Gravimetric Analysis—General Theoretical and Applied Concepts in the Preparation of Standard Methods for Metals - 01 January 1974

STP38989S: The Purity of Reagents - 01 January 1974

STP32230S: Liquid Impact Behavior of Various Nonmetallic Materials - 01 January 1974

STP32233S: Effects of Fatigue and Dynamic Recovery on Rain Erosion - 01 January 1974

STP32236S: Erosion of Fused Silica by Glass Beads - 01 January 1974

STP37198S: The Engine Cooling System - 01 January 1974

STP120B-EB: Selection and Use of Engine Coolants and Cooling System Chemicals - 01 January 1974

STP35513S: Developments of a Unique Graphite/Epoxy Antenna Subreflector* - 01 January 1974

STP35514S: Low-Weight, Impact-Resistant Helicopter Drive Shafts - 01 January 1974

STP38956S: Computerized Physical Testing of Elastomers - 01 January 1974

STP32238S: A New Method for Testing Brake Lining Materials - 01 January 1974

STP36482S: Method for Estimating Fracture Strength of Specially Orthotropic Composite Laminates - 01 January 1973

STP521-EB: Analysis of the Test Methods for High Modulus Fibers and Composites - 01 January 1973

STP36483S: Deformation and Failure of Boron-Epoxy Plate with Circular Hole - 01 January 1973

STP36484S: Free-Edge Effects in the Characterization of Composite Materials - 01 January 1973

STP36485S: Effects of Specimen Geometry on the Strength of Composite Materials - 01 January 1973

STP36486S: Compressive Strength and Failure Modes of Unidirectional Composites - 01 January 1973

STP36487S: Influence of the Free Edge upon the Strength of Angle-Ply Laminates - 01 January 1973

STP36488S: Data Averaging of Anisotropic Composite Material Constants - 01 January 1973

STP36489S: Pure Bending of Helical Wound Composite Cylinders - 01 January 1973

STP36490S: Prediction and Control of Macroscopic Fabrication Stresses in Hoop Wound, Fiberglass Rings - 01 January 1973

STP36491S: Some Important Aspects in Testing High-Modulus Fiber Composite Tubes in Axial Tension - 01 January 1973

STP36492S: Post-Yielding Behavior of Torsionally Loaded Composite Tubes - 01 January 1973

STP36493S: Ultrasonic Procedures for Inspecting Composite Tubes - 01 January 1973

STP36494S: Determination of the Mechanical Properties of Fiber Composites by Ultrasonic Techniques. - 01 January 1973

STP36495S: Influence of Fiber Property Variation on Composite Failure Mechanisms - 01 January 1973

STP36496S: Graphite Fiber Tensile Property Evaluation - 01 January 1973

STP36479S: Characterization of Composites for the Purpose of Reliability Evaluation - 01 January 1973

STP36480S: Fracture Mechanics and Composite Materials: A Critical Analysis - 01 January 1973

STP36481S: Fracture Mechanics for Fibrous Composites - 01 January 1973

STP524-EB: Applications of Composite Materials - 01 January 1973

STP47384S: Factors Controlling the Dynamic Properties of Elastomeric Products - 01 January 1973

STP535-EB: The Measurement of the Dynamic Properties of Elastomers and Elastomeric Mounts - 01 January 1973

STP47385S: The Effective Use of Dynamic Testing in Raw Materials Development Programs - 01 January 1973

STP47372S: Introduction - 01 January 1973

STP47374S: Fundamentals of Dynamic Properties Measurement of Elastomers: Part I—Measurement and Identification Principles - 01 January 1973

STP47376S: Resonant Beam System Development—Past to Present - 01 January 1973

STP47377S: Application of Electrohydraulic Test Machines to Dynamic Testing of Elastomers - 01 January 1973

STP47378S: Evolution and Uses of Transmitted Force Measurement - 01 January 1973

STP47373S: Dynamic Property Measurement of Elastomers and Elastomeric Mounts—Past, Present, and Future - 01 January 1973

STP47381S: Correlation of Dynamic Properties Test Equipment - 01 January 1973

STP47382S: Error Analysis of the Resonant Beam Rubber Testing Machine - 01 January 1973

STP47383S: Testing and Parameterization of Elastomers for Modeling of Linear Vibration Systems - 01 January 1973

STP34747S: How and What to Sample in the Analytical Gap - 01 January 1973

STP38903S: Utility of the Optical Emission Spectrometer in the Analysis of Refractories, Slags, and Other Oxide Materials - 01 January 1973

STP34131S: Helicopter Rotor Blades - 01 January 1973

STP34132S: Space Structures - 01 January 1973

STP34133S: Fabrication Processing - 01 January 1973

STP34128S: Commercial Aircraft - 01 January 1973

STP34129S: Military Aircraft - 01 January 1973

STP34130S: VTOL Aircraft - 01 January 1973

STP38582S: Sunlight, and the Microbial Susceptibility of Thermoplastics - 01 January 1973

STP533-EB: Disposal of Plastics with Minimum Environmental Impact - 01 January 1973

STP38583S: Incineration of Refuse with LOPAC Containers Added - 01 January 1973

STP38581S: Recycling Plastics: The Problems and Potential Solutions - 01 January 1973

STP38584S: Use of Old Telephone Plastic-A Feasibility Study - 01 January 1973

STP38585S: Status Report on Plastics Recycling - 01 January 1973

STP37903S: Corrosion Standards and Control in the Chemical Industry - 01 January 1973

STP47386S: Production and Quality Control of Elastomer Mounts - 01 January 1973

STP47375S: Fundamentals of Dynamic Properties Measurement of Elastomers: Part II—Instrumentation, Computation, and Compensation - 01 January 1973

STP47379S: Computation and Direct Readout of Dynamic Properties: the Identifier - 01 January 1973

STP47380S: An Application of Mini-Computers for the Determination of Elastomeric Damping Coefficients and Other Properties - 01 January 1973

STP36527S: Sensitivity and Reaction Intensity Studies of LOX-LNG Mixtures - 01 January 1973

STP41378S: New Molten Salt Systems for Cleaning Stainless Steels - 01 January 1973

STP41380S: Vibratory Cleaning, Descaling, and Deburring of Stainless Steel Parts - 01 January 1973

STP41370S: Alkaline Cleaning of Stainless Steel: An Overview - 01 January 1973

STP41386S: Cleanliness Requirements in the Chemical Industry - 01 January 1973

STP41371S: Cleaning Stainless Steel with Alkaline Solutions - 01 January 1973

STP41372S: Solvent Cleaners — Where and How to Use Them - 01 January 1973

STP41373S: Role of Organic Acids in Cleaning Stainless Steels - 01 January 1973

STP41374S: Selection of a Proper Vapor Degreasing Solvent - 01 January 1973

STP41375S: Stability of Trichlorotrifluoroethane — Stainless Steel Systems - 01 January 1973

STP41376S: Acid Cleaning of Stainless Steel - 01 January 1973

STP41377S: Passivation Treatments for Resulfurized, Free Machining Stainless Steels - 01 January 1973

STP38909S: Analysis of Polychlorinated Biphenyls in Packaging Materials - 01 January 1973

STP497-EB: Composite Materials: Testing and Design (Second Conference) - 01 January 1972

STP27744S: Thermal Expansion Characteristics of Graphite Reinforced Composite Materials - 01 January 1972

STP27745S: Fatigue of Composites - 01 January 1972

STP27746S: A New Theory to Predict Cumulative Fatigue Damage in Fiberglass Reinforced Plastics - 01 January 1972

STP27747S: Toughening Mechanisms in Continuous Filament Unidirectionally Reinforced Composites - 01 January 1972

STP27748S: Analysis of Short Beam Bending of Fiber Reinforced Composites - 01 January 1972

STP27749S: The Engineering Properties of Polymer Matrix Composite Materials by a Pure Moment Test - 01 January 1972

STP27750S: The Influence of Local Failure Modes on the Compressive Strength of Boron/Epoxy Composites - 01 January 1972

STP27751S: The Embedded Strain Gage Technique for Testing Boron/Epoxy Composites - 01 January 1972

STP27752S: The Preparation and Testing of Miniature Carbon Fiber Reinforced Composites - 01 January 1972

STP27753S: Acoustic Emission from Composite Materials - 01 January 1972

STP27738S: Design Philosophy for Boron/Epoxy Structures - 01 January 1972

STP27754S: Toughness of Filamentary Boron/Aluminum Composites - 01 January 1972

STP27755S: Impact Behavior of Unidirectional Resin Matrix Composites Tested in the Fiber Direction - 01 January 1972

STP27756S: Impact Resistance of Unidirectional Fiber Composites - 01 January 1972

STP27757S: Pendulum Impact Resistance of Tungsten Fiber/Metal Matrix Composites - 01 January 1972

STP27758S: Stress Concentrations and Failure Criteria for Orthotropic and Anisotropic Plates with Circular Openings - 01 January 1972

STP27759S: Reinforced Cutouts in Graphite Composite Structures - 01 January 1972

STP27760S: The Strength of Bolted Connections in Graphite/Epoxy Composites Reinforced by Colaminated Boron Film - 01 January 1972

STP27761S: Vibration Characteristics of Unidirectional Filamentary Composite Material Panels - 01 January 1972

STP27739S: A Brief Survey of Empirical Multiaxial Strength Criteria for Composites - 01 January 1972

STP27762S: Analysis of an Improved Boron/Aluminum Composite - 01 January 1972

STP27763S: Off-Axis and Transverse Tensile Properties of Boron Reinforced Aluminum Alloys - 01 January 1972

STP27764S: The Initiation and Growth of Fatigue Cracks in Filament Reinforced Aluminum Alloys - 01 January 1972

STP27765S: Creep Behavior of Elastic Fiber/Epoxy Matrix Composite Materials - 01 January 1972

STP27766S: Required Critical Aspect Ratio of Fibers Intended for Stress Rupture Applications - 01 January 1972

STP27767S: Neutron Irradiation Effects on a Metal Matrix Composite - 01 January 1972

STP27740S: Design and Fabrication of Tubular Specimens for Composite Characterization - 01 January 1972

STP27768S: The Transverse Strength of Boron Fibers - 01 January 1972

STP27769S: Evaluation of Unidirectional Glass-Graphite Fiber/Epoxy Resin Composites - 01 January 1972

STP27770S: Filament Misalignment and Composite Strength - 01 January 1972

STP27771S: Tensile Behavior of Bead Filled Composites - 01 January 1972

STP27741S: A Finite Element Analysis for Stress Distribution in Gripped Tubular Specimens - 01 January 1972

STP27742S: Mechanical Behavior of Carbon/Carbon Filamentary Composites - 01 January 1972

STP37148S: Cellulosics - 01 January 1972

STP500-EB: Paint Testing Manual - 01 January 1972

STP37149S: Plasticizers - 01 January 1972

STP37150S: Solvents - 01 January 1972

STP37151S: Pigments - 01 January 1972

STP37141S: Gloss - 01 January 1972

STP37152S: Density, Specific Gravity, and Bulking Values - 01 January 1972

STP37153S: Viscosity and Consistency - 01 January 1972

STP37140S: Color and Light - 01 January 1972

STP37154S: Surface Energetics - 01 January 1972

STP37155S: Particle Size Measurement - 01 January 1972

STP37142S: Hiding Power - 01 January 1972

STP37156S: Oil Absorption of Pigments - 01 January 1972

STP37157S: Preparation of Films for Test - 01 January 1972

STP37158S: Measurement of Film Thickness - 01 January 1972

STP37159S: Drying Time - 01 January 1972

STP37160S: Hardness and Related Properties - 01 January 1972

STP37161S: Abrasion Resistance - 01 January 1972

STP37162S: Adhesion - 01 January 1972

STP37163S: Flexibility - 01 January 1972

STP37164S: Tensile Strength and Elongation - 01 January 1972

STP37165S: Resistance to Water Vapor and Liquid in the Atmosphere - 01 January 1972

STP37166S: Chemical Resistance - 01 January 1972

STP37167S: Fire Retardance and Heat Resistance - 01 January 1972

STP37168S: Biological Deterioration of Paints and Paint Films - 01 January 1972

STP37169S: Natural Weathering - 01 January 1972

STP37170S: Artificial Weathering - 01 January 1972

STP37171S: Atmospheric Pollutants - 01 January 1972

STP37172S: Tests on Varnishes - 01 January 1972

STP37143S: Mass Color and Tinting Strength - 01 January 1972

STP37173S: Architectural Paint - 01 January 1972

STP37174S: Cement-Base Paint and the Painting of Masonry - 01 January 1972

STP37175S: Waxes and Polishes - 01 January 1972

STP37176S: Putty, Glazing Compounds, Caulking Compounds, and Sealants - 01 January 1972

STP37177S: Tile-Like Coatings and Seamless Floor Testing - 01 January 1972

STP37178S: Bituminous Coatings - 01 January 1972

STP37179S: Traffic Paint - 01 January 1972

STP37181S: Paint for Electrocoating - 01 January 1972

STP37182S: Printing Ink - 01 January 1972

STP37184S: Chemical Analysis of Pigments - 01 January 1972

STP37185S: Microscopy - 01 January 1972

STP37186S: Chromatography - 01 January 1972

STP37144S: Drying Oils - 01 January 1972

STP37187S: Ultraviolet Spectroscopy - 01 January 1972

STP37188S: Infrared Spectroscopy - 01 January 1972

STP37189S: Atomic Absorption and Flame Emission Spectroscopy - 01 January 1972

STP37190S: Mass Spectrometry - 01 January 1972

STP37191S: Polarography - 01 January 1972

STP37192S: Constant-Current Coulometry - 01 January 1972

STP37193S: Differential Thermal Analysis - 01 January 1972

STP37194S: Nuclear Magnetic Resonance Spectroscopy - 01 January 1972

STP37195S: Sources of Specifications - 01 January 1972

STP37145S: Driers and Metallic Soaps - 01 January 1972

STP37146S: Natural Resins - 01 January 1972

STP37147S: Synthetic Resins - 01 January 1972

STP507-EB: Bibliographical Abstracts on Evaluation of Fluorescent Whitening Agents 1929–1968 - 01 January 1972

STP34112S: Stress Intensity Factors for Surface Cracks in Bending - 01 January 1972

STP37405S: Some Considerations in Standarizing a Spectrometer Practice - 01 January 1972

STP517-EB: Optical Emission Spectrometers - 01 January 1972

STP37408S: Direct Reading Optical Emission Spectroscopy in 1972–1982 - 01 January 1972

STP37409S: Optical Emission Spectrochemical Systems—A Look Ahead - 01 January 1972

STP37406S: Analytical Spectroscopy—A Science or an Art? - 01 January 1972

STP27743S: Mechanical Behavior of Three-Dimensional Composite Ablative Materials - 01 January 1972

STP27737S: Design, Analysis, and Testing of an Advanced Composite F-111 Fuselage - 01 January 1972

STP27772S: Carbon/Carbon Composites—Solid Rocket Nozzle Material Processing, Design, and Testing - 01 January 1972

STP37180S: Paint for Marine Environment - 01 January 1972

STP37183S: Sampling, Separations, and Identification of Binder and Solvent - 01 January 1972

STP34680S: Determination of Degradation of Nylon 66 Using Differential Scanning Calorimetry - 01 January 1972

STP38025S: Cyclic Deformation and Failure of Polymers - 01 January 1971

STP26884S: Cavitation Damage Resistance and Adhesion of Polymeric Overlay Materials - 01 January 1970

STP26862S: Effect of Temperature and Pressure on Cavitation Damage in Sodium - 01 January 1970

STP48361S: Laboratory Handling and Storage of Peroxy Compounds - 01 January 1970

STP471-EB: The Laboratory Handling and Storage of Peroxy Compounds - 01 January 1970

STP43019S: Molecular Formula List for Infrared and Far-Infrared Spectra - 01 January 1969

STP331-EB: Molecular Formula List of Compounds, Names, and References to Published Infrared Spectra - 01 January 1969

STP43020S: Organic and Inorganic Alphabetical List for Infrared and Far-Infrared Spectra - 01 January 1969

STP43021S: References for Abstracted Infrared and Far-Infrared Spectra - 01 January 1969

STP43022S: CODEN Assignment List - 01 January 1969

STP47269S: Chemical Aspects of Atomic Absorption - 01 January 1969

STP443-EB: Atomic Absorption Spectroscopy - 01 January 1969

STP47267S: Introduction - 01 January 1969

STP47270S: A Comparison of Atomic Absorption with Other Spectrochemical Methods - 01 January 1969

STP47268S: Physical Aspects of Atomic Absorption - 01 January 1969

STP47271S: A Comparison of Atomic Absorption with Some Other Techniques of Chemical Analysis - 01 January 1969

STP47272S: Determination of Trace Metals in Seawater by Atomic Absorption Spectrophotometry - 01 January 1969

STP47275S: Determination of Calcium in High Interference Systems by Atomic-Absorption Flame Photometry - 01 January 1969

STP41914S: Wear and Friction of Nonmetallic Materials - 01 January 1969

STP44702S: Fracture in Laminated Materials - 01 January 1969

STP452-EB: Interfaces in Composites - 01 January 1969

STP44703S: Interfacial Stability of Silicon Carbide Coated Boron Filament Reinforced Metals - 01 January 1969

STP44704S: Effect of Water on Glass Fiber-Resin Bonds - 01 January 1969

STP44705S: Interfacial Stability of Eutectic Composites - 01 January 1969

STP44706S: Wetting, Adsorption, and Bonding at Glass Fiber-Coupling Agent-Resin Interfaces - 01 January 1969

STP44698S: Measurement of the Fiber-Polymer Matrix Interfacial Strength - 01 January 1969

STP44697S: Interfacial Bonding in Graphite Fiber-Resin Composites - 01 January 1969

STP44699S: Theoretical Studies of the Mechanics of the Fiber-Matrix Interface in Composites - 01 January 1969

STP44700S: The Importance of Coatings in the Preparation of Al2O3 Filament/Metal-Matrix Composites - 01 January 1969

STP44701S: Role of the Interface in the Fracture of Fiber-Composite Materials - 01 January 1969

STP47360S: Fracture Surface and Processes in Polycarbonate - 01 January 1969

STP47353S: Introduction - 01 January 1969

STP32020S: The Information Background in the Field of Biological Deterioration of Nonmetallic Materials - 01 January 1969

STP32026S: Analysis for Organic Pesticides in Aquatic Environments - 01 January 1969

STP31929S: Standard Method of Test for Benzene and Toluene by Ultraviolet Spectrophotometry - 01 January 1968

STP31943S: Standard Method of Test for Bromine Index of Aromatic Hydrocarbons by Potentiometric Titration - 01 January 1968

STP31944S: Standard Method of Test for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration - 01 January 1968

STP31958S: Tentative Methods of Test for Polymer Content of Styrene Monomer - 01 January 1968

STP31989S: Proposed Method of Test for Benzene, Toluene, Ethylbenzene, and Individual Xylenes by Infrared Spectrophotometry - 01 January 1968

STP43810S: The Mechanical Behavior of Aluminum-Boron Composite Material - 01 January 1968

STP438-EB: Metal Matrix Composites - 01 January 1968

STP43811S: Plastic Yielding and Strain Distribution in Filament-Reinforced Metals - 01 January 1968

STP43812S: Micromechanics of Boron Filament Reinforced Aluminum Composites - 01 January 1968

STP43813S: Mechanical Behavior of a Fiber Reinforced Metal and Its Effect Upon Engineering Applications - 01 January 1968

STP43814S: Deformation of Wire Reinforced Metal Matrix Composites - 01 January 1968

STP43815S: Evaluating Potential Fatigue Performance of Composites (Cu/W and Cu/Mo) from Microstructural Behavior - 01 January 1968

STP43806S: Fabrication and Evaluation of Sapphire Whisker Reinforced Aluminum Composites - 01 January 1968

STP43805S: The Technical Potential for Metal Matrix Composites - 01 January 1968

STP43807S: The Effect of Fiber Orientation and Morphology on the Tensile Behavior of Al3Ni Whisker Reinforced Aluminum - 01 January 1968

STP43808S: In Situ Measurements of Deformation Behavior of Individual Phases in Composites by X-Ray Diffraction - 01 January 1968

STP43809S: Microstrain Behavior of Metal-Matrix Composites - 01 January 1968

STP41826S: Microscopical Studies of Impact and Shock Loading of Metals and Fluorocarbon Polymers Immersed in Liquid Fluorine - 01 January 1968

STP45883S: Nondestructive Testing of Graphite at the Los Alamos Scientific Laboratory - 01 January 1968

STP439-EB: Nondestructive Testing of Nuclear Graphite - 01 January 1968

STP45884S: Application of Alcohol Penetrant for Evaluation of Surface Porosity of Graphite Inserts for Rocket Nozzles - 01 January 1968

STP45885S: Prediction of Strength of Graphitic Material by Nondestructive Test Techniques - 01 January 1968

STP45882S: Infrared Testing of Bonds Between Graphite and Protective Coatings - 01 January 1968

STP45886S: Contact Microradiography of Graphite - 01 January 1968

STP45887S: A Novel Infrared Nondestructive Testing Technique For Determining the Thermal Conductivity of Graphite - 01 January 1968

STP45888S: Strength Predictions for Graphite: A Review of Prior Work at AVCO SSD - 01 January 1968

STP45889S: Low Voltage Radiographic and Micoradiographic Techniques for Graphite - 01 January 1968

STP427-EB: Fiber-Strengthened Metallic Composites - 01 January 1967

STP42046S: Analysis of Stress-Rupture and Creep Properties of Tungsten Fiber Reinforced Copper Composites - 01 January 1967

STP42047S: Metallurgical and Geometrical Factors Affecting Elevated Temperature Tensile Properties of Discontinuous Tungsten Fiber Reinforced Composites - 01 January 1967

STP42048S: Summary of ASTM/ASME Composite Symposium - 01 January 1967

STP42041S: Effect of Temperature on Mechanical Properties of Boron-Electrodeposited Nickel Composites - 01 January 1967

STP42039S: Interior Elastic Stress Field in a Continuous, Close-Packed Filamentary Composite Material Under Uniaxial Tension - 01 January 1967

STP42042S: Fundamental Study of Metal Matrix Composites - 01 January 1967

STP42044S: Fibering of Oxides in Refractory Metals - 01 January 1967

STP42045S: High Energy-Rate Forming of Fibrous Composites - 01 January 1967

STP42040S: Electroforming to Make Composite Materials - 01 January 1967

STP42043S: How Metal Matrix Composites Are Made - 01 January 1967

STP405-EB: Orientation Effects in the Mechanical Behavior of Anisotropic Structural Materials - 01 January 1966

STP45147S: Effect of Material Orthotropy on the Directions of Principal Stresses and Strains - 01 January 1966

STP45149S: Anisotropy in Wood - 01 January 1966

STP45150S: Matrix-Tensor Mathematics in Orthotropic Elasticity - 01 January 1966

STP45151S: Metal Matrix Composite Materials - 01 January 1966

STP44637S: The Radiation-Induced Decomposition of Some Inorganic Sulfates - 01 January 1966

STP400-EB: Effects of High-Energy Radiation on Inorganic Substances - 01 January 1966

STP44638S: Activation and Sintering Behavior of Calcium Oxide—the Effect of Copper X-Irradiation on the Surface Area of the Oxide Produced by Thermal Decomposition - 01 January 1966

STP44639S: On the Dichroism in R-Bands Induced in γ-Irradiated Potassium Chloride Crystals - 01 January 1966

STP44633S: The Radiolytic Decomposition of Crystalline Alkali Metal and Alkaline Earth Bromates - 01 January 1966

STP44632S: The Thermal Decomposition of Irradiated Mercuric Oxalate - 01 January 1966

STP44634S: Thermal Decomposition of Gamma-Irradiated Barium Azide - 01 January 1966

STP44636S: Electron Spin Resonance Spectra of Radiation — Damaged Inorganic Crystals - 01 January 1966

STP44643S: Durability of Adhesive-Bonded Aluminum Joints Exposed to Outdoor Weathering - 01 January 1966

STP401-EB: Durability of Adhesive Joints - 01 January 1966

STP44644S: Durability of Adhesive Peel Joints While Stressed in Water - 01 January 1966

STP44645S: Durability of Bonded Housing Components - 01 January 1966

STP44642S: Can the Service Life of Bonds Be Predicted? - 01 January 1966

STP44646S: A Bayes Evaluation of Building Materials Reliability - 01 January 1966

STP44647S: Accelerated Tests for Deterioration of Adhesive Bonds in Plywood - 01 January 1966

STP44648S: Softwood Plywood Adhesive Bonds for Construction Uses - 01 January 1966

STP44649S: Effects of South Florida Weathering on Structural Adhesive Joints - 01 January 1966

STP46193S: Cleaning Methods - 01 January 1966

STP403-EB: Cold Cleaning with Halogenated Solvents - 01 January 1966

STP46191S: Applications and Limitations of Cold Cleaning - 01 January 1966

STP46194S: General Discussion of Hazards - 01 January 1966

STP46195S: Bulk Storage - 01 January 1966

STP46196S: General Conclusions and Recommendations - 01 January 1966

STP46192S: Solvents Used in Cold Cleaning - 01 January 1966

STP45148S: Anisotropic Sandwich Constructions - 01 January 1966

STP45126S: Irreversible Effects of High Temperature and High Pressure on Organic Materials - 01 January 1965

STP45125S: Quenchable Effects of High-Temperature, High-Pressure Treatment on Nonmetallic Materials - 01 January 1965

STP45860S: Lacquer Marring by Plasticizer Migration from Vinyl Chloride Plastics - 01 January 1965

STP375-EB: Simulated Service Testing in the Plastics Industry - 01 January 1965

STP45861S: Hydrostatic Strength and Design Stresses for Thermoplastic Pipe with Water - 01 January 1965

STP45859S: Simulated Service Tests of Plastics Parts in a Resin Laboratory - 01 January 1965

STP45862S: Plastic Part Properties and their Relationship to End-Use Performance - 01 January 1965

STP45863S: Filament-Wound Structures - 01 January 1965

STP45864S: Causes of Polypropylene Oven Aging Variability - 01 January 1965

STP43766S: Micromechanisms and Phenomenology of Damping in Polymers - 01 January 1965

STP43767S: Macromechanisms of Damping in Composite Structures - 01 January 1965

STP383-EB: Continuous Measurement of the Cure Rate of Rubber - 01 January 1965

STP47206S: Introduction - 01 January 1965

STP47209S: Cepar Measurements of Curing Constants - 01 January 1965

STP373-EB: Application of Advanced and Nuclear Physics to Testing Materials - 01 January 1965

STP43762S: Damping Studies in Materials Science and Materials Engineering - 01 January 1965

STP43763S: Anelastic Phenomena in Metals and Nonmetallics - 01 January 1965

STP47198S: Fused Silica as an Aerospace Material - 01 January 1965

STP47203S: Thermal-Structural Composites for Aerospace Applications - 01 January 1965

STP44596S: Effect of Polymer Structure on Shear Stability of Polymer-Thickened Power Transfer Fluids - 01 January 1965

STP382-EB: The Effects of Polymer Degradation on Flow Properties of Fluids and Lubricants Containing Polymers - 01 January 1965

STP44597S: Viscosity Loss in Polymer-Thickened Oils During Use - 01 January 1965

STP44595S: Some Aspects of Polymer Degradation Processes - 01 January 1965

STP44598S: Effect of Some High-Energy Sources on Polymer-Thickened Lubricants - 01 January 1965

STP44599S: Consideration of the Degradation of Polymer Systems on the Basis of Reduced Viscosity Loss - 01 January 1965

STP44600S: Discrepancies Between Mechanical and Sonic Shear Methods in Evaluating Shear Stability of Hydraulic Fluids - 01 January 1965

STP47208S: Plasticity and Cure Control and Cross-Linking Studies of Rubber Using the Wallace-Shawbury Curometer - 01 January 1965

STP47207S: Continuous Measurement of Rubber Vulcanization with the Agfa Vulcameter - 01 January 1965

STP47210S: Uses of an Oscillating Disk Rheometer for Determining the Rheological Properties of Elastomers During Vulcanization - 01 January 1965

STP47211S: The Viscurometer—A Study of Variables Associated with its Use - 01 January 1965

STP47212S: Vulcanization Measurement Using the Instron Tester - 01 January 1965

STP43782S: Studies On Polymer Implants In Humans - 01 January 1965

STP386-EB: Plastics in Surgical Implants - 01 January 1965

STP43770S: Synthetic prostheses, silicone, teflon, and etheron, with laboratory and clinical studies, including full jaw substitutions - 01 January 1965

STP43771S: Principles of Polymer Implant Applications - 01 January 1965

STP43769S: The Development of Artificial Heart Valves - 01 January 1965

STP43772S: Abstract Molecular Structure and Properties of Macromolecules - 01 January 1965

STP43773S: Abstract Surface Properties and Wettability of Plastics - 01 January 1965

STP43775S: Designing and Fabricating with Elastomers - 01 January 1965

STP43776S: Designing and Fabricating with Rigid Polymers - 01 January 1965

STP43777S: Resistance of Polymers to Degradation - 01 January 1965

STP43778S: Changes in Properties of Plastics During Implantation - 01 January 1965

STP43779S: Biological Endpoints for Compatibility - 01 January 1965

STP43780S: Abstract Antigenicity of Synthetic Polypeptide Antigens - 01 January 1965

STP43781S: Effects of Implants on the Blood - 01 January 1965

STP47152S: Determination of Trace Hydrocarbon Impurities in High Purity Chemicals from Petroleum by Gas Chromatography - 01 January 1965

STP46025S: Fire and Explosion Hazards of Peroxy Compounds - 01 January 1965

STP394-EB: Fire and Explosion Hazards of Peroxy Compounds - 01 January 1965

STP177A-EB: 1964 Bibliographical Abstracts on Evaluation of Brightening Agents for Detergent Usage: 1929 – 1961 - 01 January 1964

STP48381S: Table I — Equipment for Evaluation of Optical Brighteners - 01 January 1964

STP44550S: Some Applications of Ultraviolet Microscopy in Resinography - 01 January 1964

STP348-EB: Resinographic Methods - 01 January 1964

STP44542S: The Preparation of Resins for Microscopical Examination by Reflected Light - 01 January 1964

STP44551S: Fluorescence Microscopy of Resins - 01 January 1964

STP44552S: Dispersion Staining as Applied to Organic Polymer Identification - 01 January 1964

STP44554S: Resinography with 8-A X-Rays - 01 January 1964

STP44555S: Electron Resinography of a Polyphase Polymeric System - 01 January 1964

STP44556S: Microscopical Studies of Heterogeneous Polymeric Systems - 01 January 1964

STP44557S: Stress Crazing Failure—A Mechanism of Surface Formation Through Wetting - 01 January 1964

STP44543S: Transparent Section Microscopy and High-Speed Cinematography in Photoelasticity Studies - 01 January 1964

STP44544S: Microscopical Apparatus and Techniques for Observing the Fiber-Forming Process - 01 January 1964

STP44545S: Analysis of Submicroscopic Structures in Resins by Polarized Light - 01 January 1964

STP44546S: Measurement of the Surface Properties of Fibers - 01 January 1964

STP44547S: Light-Scattering Studies of the Internal Structure of Films and Fibers - 01 January 1964

STP44548S: The Electron Microscope Applied to a Study of Polyethylene Fibers - 01 January 1964

STP44549S: Phase Microscopy in Resinography - 01 January 1964

STP45951S: Methods of Quantitative Electron Probe Analysis - 01 January 1964

STP45952S: Comparison of X-ray Fluorescence and Electron Probe Methods: Future Trends - 01 January 1964

STP45948S: X-ray Spectrographic Analysis of Liquids and Solutions - 01 January 1964

STP45949S: Summary of Papers on X-ray Spectrochemical Analysis - 01 January 1964

STP44568S: Performance of Phenolic and Urea Resins in Particle-Board Binding - 01 January 1964

STP44570S: Evidence of Need for Wood-Failure Standard - 01 January 1964

STP44571S: Nondestructive Testing of Adhesive-Bonded Joints - 01 January 1964

STP44572S: Strength of Epoxy Adhesives when Stressed to Failure in Milliseconds - 01 January 1964

STP44573S: 1963 Edgar Marburg Lecture: Adhesives—Past, Present, and Future - 01 January 1964

STP44561S: Determination of Intermolecular Forces by Surface-Chemical Techniques - 01 January 1964

STP44562S: Fiber-Elastomer Adhesion Variables - 01 January 1964

STP44563S: Adhesion and Cleavage Stress at Interfaces Between Solids and a Pressure-Sensitive Adhesive - 01 January 1964

STP44560S: Application of Fracture Mechanics to Adhesive Joints - 01 January 1964

STP44565S: Flexural Moduli and Deflection Temperatures of Various Epoxy Formulations - 01 January 1964

STP44566S: Phenoxy Resin—A New Thermoplastic Adhesive - 01 January 1964

STP44553S: Microscopical Techniques for the Study of Solid-State Polymerization - 01 January 1964

STP359-EB: Symposium on the Chemical and Physical Effects of High-Energy Radiation on Inorganic Substances - 01 January 1964

STP45818S: Paramagnetic Resonance of Transition Elements and Irradiated Substances - 01 January 1964

STP45819S: Thermal Decomposition of Irradiated Nickel Oxalate - 01 January 1964

STP45817S: Use of Color Centers for Detection and Measurement of Defects - 01 January 1964

STP45820S: X-Ray Diffraction Studies of Silver Permanganate - 01 January 1964

STP45821S: Radiation-Induced Changes in Reactivity of Ammonium Perchlorate - 01 January 1964

STP45822S: Radiation-Induced Decomposition of Inorganic Solids - 01 January 1964

STP45823S: Low-Energy Radiation Damage Processes in a Body-Centered Cubic Lattice - 01 January 1964

STP45824S: Effect of Ionizing Radiation on Alkali Halides - 01 January 1964

STP360-EB: Adhesion - 01 January 1964

STP44569S: Polyken Probe Tack Tester - 01 January 1964

STP44564S: Chemical Nature of Polymer to Metal Adhesion - 01 January 1964

STP44567S: Adhesive Requirements for the Automotive Industry - 01 January 1964

STP44427S: Compression, Fatigue, and Stress Studies on NOL Ring Specimens - 01 January 1963

STP327-EB: Symposium on Standards for Filament-Wound Reinforced Plastics - 01 January 1963

STP44429S: Research on Wire-Wound Composite Materials - 01 January 1963

STP44420S: Survey of Methods of Test for Parallel Filament Reinforced Plastics - 01 January 1963

STP44430S: Evaluation of High-Strength-and-Modulus Brittle Materials in Filament and Composite Forms - 01 January 1963

STP44431S: Single-End Glass Yarn Tension Test - 01 January 1963

STP44432S: A Tension Test Method for Glass Fiber Strands, Yarns, and Rovings (OCF Strand Test) - 01 January 1963

STP44433S: Comparative Evaluation of Methods for Measurement of Hoop Tensile Strength by Means of an NOL Type Filament-Wound Ring - 01 January 1963

STP44434S: Preparation and Testing of NOL Rings from Preimpregnated Rovings - 01 January 1963

STP44435S: A Segmented Cylinder Test for Determining Hoop Stress in Composite Structures - 01 January 1963

STP44436S: Developing Standards for Use of Preimpregnated Roving - 01 January 1963

STP44439S: Proposed Method of Test for Interlaminar Shear Properties of Sizings and Binders for Secondary Reinforcements Using a Polar-Cut Ovaloidal Specimen - 01 January 1963

STP44441S: Craze Cracking in Glass Filament-Wound Pressure Chambers - 01 January 1963

STP44442S: Some Nondestructive Tests for Filament-Wound Structures - 01 January 1963

STP44443S: Corona Detection Techniques as a Nondestructive Method for Locating Voids in Filament-Wound Structures - 01 January 1963

STP44446S: Use of Lead Glass Fiber Yarns as Tracers in Radiography of Filament-Wound Products - 01 January 1963

STP44447S: Test Methods for Filament-Wound Specimens - 01 January 1963

STP44421S: Absolute and Differential Dilatometry for Measurement of Unrestrained Shrinkage on Resin Curing - 01 January 1963

STP44422S: A Proposed Method for Determining Percentage of Resin Flow in Preimpregnated Roving - 01 January 1963

STP44424S: Compression Testing of NOL Rings - 01 January 1963

STP44425S: Compressive Strength of Parallel Filament-reinforced Plastics: Development of a New Test Method - 01 January 1963

STP44426S: The NOL Ring Test as a Method for Selecting Finished Glass Fibers for Reinforcement of Epoxy Pipe - 01 January 1963

STP331A-EB: First Supplement to Molecular Formula List of Compounds, Names, and References to Published Infrared Spectra - 01 January 1963

STP43500S: Molecular Formulae List for Infrared Spectra - 01 January 1963

STP43501S: Alphabetical List, Organic, for Infrared Spectra - 01 January 1963

STP43502S: Alphabetical List, InOrganic, for Infrared Spectra - 01 January 1963

STP43503S: Molecular Formulae List for Near-Infrared Spectra - 01 January 1963

STP43504S: Molecular Formulae List for Far-Infrared Spectra - 01 January 1963

STP43505S: Alphabetical List, Organic, for Far-Infrared Spectra - 01 January 1963

STP42027S: Metallurgical Effects of Explosive Straining - 01 January 1963

STP336-EB: Symposium on Dynamic Behavior of Materials - 01 January 1963

STP42022S: High-Speed Compression Testing of Thermoplastics - 01 January 1963

STP42028S: Plastic Wave Propagation in Rods - 01 January 1963

STP42029S: Plastic Impacts on Short Cylindrical Specimens - 01 January 1963

STP42030S: Measurement of Dynamic Plastic Flow Properties under Uniform Stress - 01 January 1963

STP42031S: A Submicrosecond Technique for Simultaneous Observation of Input and Propagated Impact Stresses - 01 January 1963

STP42032S: Production of Strong Shocks in Plastics by Ultra-Short Impulsive Loading - 01 January 1963

STP42033S: Experiments on the Mechanism of Spall - 01 January 1963

STP42023S: An Investigation of the Dynamic Mechanical Properties of Polyethylene - 01 January 1963

STP42021S: Second Report on Round-Robin Testing of Thermoplastics: Task Group on High-Speed Testing, Astm Committee D-20 on Plastics - 01 January 1963

STP42024S: Behavior of Filamentous Materials Subjected to High-Speed Tensile Impact - 01 January 1963

STP42025S: Impact Performance of Ht-1 and Nylon Webbings to Mach 0.7 - 01 January 1963

STP42026S: On Experimental Solid Dynamics - 01 January 1963

STP43510S: Table II. Codes for Reference Materials - 01 January 1963

STP343-EB: Compilation of Gas Chromatographic Data - 01 January 1963

STP43508S: Description and Use of the Compilation - 01 January 1963

STP43511S: Table III. Codes for Solids Supports and Active Solids - 01 January 1963

STP43512S: Table IV. “Coden” Abbreviations for Journal Titles - 01 January 1963

STP43516S: Table VIII. Gas Chromatographic Data Tabulated on Basis of Serial Number - 01 January 1963

STP43513S: Table V. Codes for the Subject Index of the Bibliography - 01 January 1963

STP43509S: Table I. Codes for Liquid Phases - 01 January 1963

STP43515S: Table VII. Gas Chromatographic Data Tabulated on Basis of Liquid Phase - 01 January 1963

STP357-EB: Molecular Formula List of Compound Names and References to Published Ultraviolet and Visible Spectra - 01 January 1963

STP48226S: Molecular Formula List of Compound Names and References to Published Ultraviolet and Visible Spectra - 01 January 1963

STP48121S: Serial Number List of Compound Names and References to Published Infrared Spectra - 01 January 1963

STP358-EB: Serial Number List of Compound Names and References to Published Infrared Spectra - 01 January 1963

STP45089S: Selection and Use of Engine Coolants - 01 January 1963

STP120A-EB: Selection and Use of Engine Coolants and Cooling System Chemicals - 01 January 1963

STP44428S: Evaluation of Hoop Tension Tests as a Method of Screening Materials for Filament-Winding Application - 01 January 1963

STP44440S: ASTM Task Group Round-Robin Testing - 01 January 1963

STP44444S: A Television X-ray Image Enlargement System for Non-destructive Testing of Fiber Glass Reinforced Plastic Missile Case Materials - 01 January 1963

STP44445S: Quality Control Procedures for Rocket Motor Cases: Reinforced Plastic Versus Steel - 01 January 1963

STP44419S: Key Properties and Proposed Digital Code System for Glass Fiber Reinforcements for Filament Winding - 01 January 1963

STP44423S: A Portable Proximity Probe for Detection of Moisture Within a Laminate - 01 January 1963

STP44486S: Effect of Temperature on Ultrasonic Cavitation of Fluorinated Solvents - 01 January 1963

STP44482S: Chemical Factors in the use and Handling of Electronic Grade Hydrogen Peroxide - 01 January 1963

STP44483S: Effect of Temperature on Resistance of Ultrapure Organic Solvents - 01 January 1963

STP44484S: Chemical Durability Evaluation of Electronic Glasses - 01 January 1963

STP45100S: Shear Test for Adhesive Bonds - 01 January 1963

STP45101S: Compressive Properties of Pyrolytic Graphite from Room Temperature to 5000 F - 01 January 1963

STP45071S: The Effect of Impurities on the Properties of Ceramic Materials - 01 January 1962

STP304-EB: Symposium on Major Effects of Minor Constituents on the Properties of Materials - 01 January 1962

STP45072S: Major Effects from Minor Constituents—Role in Organic Structural Polymers - 01 January 1962

STP45073S: The Problem of Gas Purity in Plasma Physics and Technology - 01 January 1962

STP45074S: Effects of Small Amounts of Extraneous Materials on Properties of Petroleum, Petroleum Products, and Related Liquids - 01 January 1962

STP45082S: Deformation of solids by Impact of Liquids at High Speeds - 01 January 1962

STP48421S: Evaluation of Compression Set of Vulcanized Elastomers—Standard versus Variable Deflection Methods - 01 January 1962

STP311-EB: Evaluation of Compression Set of Vulcanized Elastomers—Standard Versus Variable Deflection Methods - 01 January 1962

STP39394S: A Review of the Stress-Strain-Time-Temperature Behavior of Ceramics - 01 January 1962

STP39396S: Stress-Strain-Time-Temperature Relationships for Polymers - 01 January 1962

STP45794S: Degreaser Operation - 01 January 1962

STP310-EB: Handbook of Vapor Degreasing - 01 January 1962

STP45790S: Process Description - 01 January 1962

STP45795S: General Hazards of Perchlorethylene and Trichlorethylene - 01 January 1962

STP45791S: Applications - 01 January 1962

STP45792S: Selection of a Vapor Degreasing Solvent - 01 January 1962

STP45793S: Vapor Degreasing Equipment - 01 January 1962

STP325-EB: Symposium on Stress-Strain-Time-Temperature Relationships in Materials - 01 January 1962

STP271-EB: Symposium on Adhesion and Adhesives - 01 January 1961

STP45052S: The National Role of Materials Research and Development - 01 January 1961

STP44368S: A Technique for Torsional Testing Refractory Materials at Temperatures up to 2800 C - 01 January 1961

STP44369S: Shear and Torsion Testing of Solid Materials—A Critical Discussion - 01 January 1961

STP292-EB: Index to the Literature on X-Ray Spectrographic Analysis Part I, 1913–1957 - 01 January 1961

STP42655S: Elevated Temperature Resistant Metal-to-Metal Adiiesives Derived from Organic-Inorganic Polymer Systems - 01 January 1961

STP42656S: Preliminary Evaluation of Ceramic Adhesives for Stainless Steel - 01 January 1961

STP42654S: Lap-Shear and Creep Testing of Metal-to-Metal Adhesive Bonds in Germany - 01 January 1961

STP42657S: Tensile Shear Strength of Adhesive Bonded Metals as a Function of the Rate of Loading - 01 January 1961

STP42658S: Bonded Metal-to-Metal Shear Testing - 01 January 1961

STP46383S: Arc Jet Measurements Related to Ablation Test Validity - 01 January 1961

STP279-EB: Reinforced Plastics for Rockets and Aircraft - 01 January 1961

STP46376S: Evaluation of Reinforced Plastics for High Temperature Structural Applications - 01 January 1961

STP46375S: Introduction - 01 January 1961

STP46377S: Evaluation of Reinforcements for Structural Plastics - 01 January 1961

STP46378S: Permeability of Materials Under High Pressures and at Various Temperatures - 01 January 1961

STP46379S: Principles and Capabilities of Ablation - 01 January 1961

STP46380S: Testing of Materials Under Ablative Conditions - 01 January 1961

STP46381S: Photographic Technique of Surface Temperature Measurement - 01 January 1961

STP46382S: Testing of Reinforced Plastics Under Simulated Re-Entry Conditions - 01 January 1961

STP45056S: Status of Ductile Ceramic Research - 01 January 1961

STP44362S: Bonded Metal-to-Metal Shear Testing - 01 January 1961

STP45936S: The Role of Motor Gasoline Additives - 01 January 1961

STP41233S: ARC Sealing of Borosilicate Glasses - 01 January 1961

STP41234S: Recommended Practices for Safe Handling of Beryllium Oxide Ceramics - 01 January 1961

STP41235S: Beryllium Oxide Dielectric Heat Sinks for Electronic Devices - 01 January 1961

STP259-EB: Symposium on Spectroscopic Excitation - 01 January 1960

STP39364S: Effects of Gaseous Atmospheres on Excitation - 01 January 1960

STP39363S: The Matrix Effect in Excitation - 01 January 1960

STP39365S: Some Properties of New or Modified Excitation Sources - 01 January 1960

STP45779S: Special Problems in the Determination of Tetraethyllead in Gasoline by Flame Photometry - 01 January 1960

STP269-EB: Symposium on Spectroscopy - 01 January 1960

STP45780S: The Unpaired Electron via Electron Paramagnetic Resonance Spectrometry - 01 January 1960

STP45781S: Maser Applications and Traveling-Wave Techniques for Magnetic Resonance Spectroscopy - 01 January 1960

STP45782S: Band Nomenclature for the Ultraviolet Spectra of Conjugated Organic Compounds - 01 January 1960

STP45783S: Some Comments Concerning Quantitative Infrared Spectroscopy - 01 January 1960

STP45784S: A Technique for Preparing Solid Organic Samples for Infrared Analysis - 01 January 1960

STP45785S: The Combination of Methods in the Analysis of Complex Hydrocarbon Systems - 01 January 1960

STP45786S: Molecular Spectroscopy in the USSR - 01 January 1960

STP45787S: Ultraviolet Spectroscopy: Aromaticity of Carbonaceous Materials; Absorption Errors - 01 January 1960

STP45788S: The Application of Some Spectrographic Techniques to the Analysis of Water-Formed Deposits - 01 January 1960

STP45773S: Spectroscopy of Radioactive Materials - 01 January 1960

STP45774S: Communications in Spectrochemical Analysis - 01 January 1960

STP45772S: Challenges in Atomic Spectroscopy - 01 January 1960

STP45775S: Application of X-Ray Spectroscopy to Unsolved Problems in Geochemistry - 01 January 1960

STP45777S: Spectroscopy in the Region 175 to 200 mμ - 01 January 1960

STP45778S: Analytical Flame Photometry: New Developments - 01 January 1960

STP44354S: Techniques for Controlling Surface Pitting in Polishing Ceramic Materials - 01 January 1960

STP263-EB: Symposium on Education in Materials - 01 January 1960

STP39572S: Effect of Water-Reducing Admixtures and Set-retarding Admixtures as Influenced by Portland Cement Composition - 01 January 1960

STP266-EB: Symposium on Effect of Water-Reducing Admixtures and Set-Retarding Admixtures on Properties of Concrete - 01 January 1960

STP39573S: Field Experience Using Water-Reducers in Ready-Mixed Concrete - 01 January 1960

STP39574S: Detection of Lignosulfonate Retarder in Cement Suspensions and Pastes - 01 January 1960

STP39575S: Introduction to Producers' Papers on Water-Reducing Admixtures and Set-Retarding Admixtures for Concrete - 01 January 1960

STP39576S: Effect of Water-Reducing Admixtures and Set-Retarding Admixtures on the Properties of Plastic Concrete - 01 January 1960

STP39577S: The Effect of Water-Reducing Admixtures and Set-Retarding Admixtures on the Properties of Hardened Concrete - 01 January 1960

STP39578S: Water-Reducing Admixtures and Set-Retarding Ad-Mixtures for Concrete: Uses; Specifications; Research Objectives - 01 January 1960

STP39570S: Structural and Lean Mass Concrete as Affected by Water-Reducing, Set-Retarding Agents - 01 January 1960

STP39569S: Actions of Calcium Sulfate and Admixtures in Portland Cement Pastes - 01 January 1960

STP39571S: Observations in Testing and Use of Water-Reducing Retarders - 01 January 1960

STP39374S: A Radiometric Method for Determination of Magnesium Oxide in Portland Cement - 01 January 1960

STP41203S: Standard Toxicity Evaluation of Chemicals Poisonous to the Marine Borer - 01 January 1960

STP41204S: Column Chromatography in the Analysis of Creosote - 01 January 1960

STP41202S: Use of Small Panels in Screening Potential Wood Preservatives - 01 January 1960

STP276-EB: Materials in Nuclear Applications - 01 January 1960

STP39599S: Postirradiation Oxidation and Molecular Weight Changes in Polystyrene and Poly(Methyl Methacrylate) - 01 January 1960

STP39600S: Postirradiation Dielectric Properties of Silicones - 01 January 1960

STP39601S: Postirradiation Effects: Monomers and Polymers - 01 January 1960

STP39606S: Dry Pressing Ceramic Fuel Elements to Close Tolerances - 01 January 1960

STP39607S: Fabrication and Evaluation of Urania-Alumina Fuel Elements and Boron Carbide Burnable Poison Elements - 01 January 1960

STP39608S: Silicon Carbide Clad Graphite Matrix Fuel Elements - 01 January 1960

STP39609S: Graphite as a Fuel Matrix - 01 January 1960

STP39610S: Fabrication of U3O8 - Aluminum Dispersion Fuel Elements by Extrusion - 01 January 1960

STP39589S: Effects of Gamma Radiation on Some Electrical Properties of TFE-Fluorocarbon Plastics - 01 January 1960

STP46362S: Determinant Sample Parameters in Radiation Effects Testing of High Polymers - 01 January 1960

STP44185S: Standardization in France - 01 October 1959

STP247-EB: International Symposium on Plastics Testing and Standardization - 01 October 1959

STP44200S: On the Most Suitable Specimen Shape for Testing Shear Strength of Plastics - 01 October 1959

STP44202S: Mechanical Properties of Plastics at High Speeds of Stressing: The Transition from Ductile to Brittle Behavior - 01 October 1959

STP44186S: Standardization in Germany - 01 October 1959

STP44204S: An Improved Flow Tester for Thermosetting and Thermoplastic Molding Compounds - 01 October 1959

STP44205S: The Vicat Softening Point Test Method: Correlations, Uses, and Variants - 01 October 1959

STP44206S: Rheology of Polymer Melts—A Correlation of Dynamic and Steady Flow Measurements - 01 October 1959

STP44207S: Transition Phenomena in the Study of Impact Strength of Plastics - 01 October 1959

STP44209S: The Accurate Determination of Molecular Weights of Macromolecules - 01 October 1959

STP44187S: Standardization in Hungary - 01 October 1959

STP44210S: The Use of Infrared Spectroscopy in Characterization of Polymer Structure - 01 October 1959

STP44211S: The use of X-ray Diffraction and Scattering in Characterization of Polymer Structure - 01 October 1959

STP44188S: Standardization in Poland - 01 October 1959

STP44212S: Nuclear Resonance Studies of Polymer Chain Flexibility - 01 October 1959

STP44189S: Standardization in Rumania - 01 October 1959

STP44190S: Standardization in Sweden - 01 October 1959

STP44191S: Standardization in the Netherlands - 01 October 1959

STP44192S: