All Chemicals Journal Papers

Search within Chemicals


JTE20120043: An Experimental Investigation of Factors Considered for the Short Beam Shear Strength Evaluation of Carbon Fiber–reinforced Thermoplastic Laminates - 01 May 2014

JTE20120354: Regression of the Recovery Rate of ACM Rubber Gasket for Long-Term Performances - 01 May 2014

JTE20130082: Interlaminar Shear and Electrical Resistance Responses of Woven-Carbon-Fiber-Reinforced-Polymer Composite Laminates at Cryogenic Temperatures From Cyclic Short Beam Shear Tests - 01 May 2014

JTE20130160: The Effect of Temperature on the Tear Behavior of Various Elastomers - 01 May 2014

JTE20130001: Experimental Research of Thermal-Oxidative Aging on the Mechanics of Aero-NBR - 01 May 2014

JTE20120251: Thermal Degradation Kinetics of a Linked Polyurethane Acrylate Film - 01 March 2014

JTE20120353: Investigations on Wood–Plastic Composites Reinforced With Silica Particles Using Design of Experiment - 01 March 2014

MPC20130041: Notch Fracture Toughness Evaluation for a Brittle Graphite Material - 28 February 2014

MPC20130034: Internal Notched Flexure (INF) Test for Measurement of Mode II Interlaminar Fracture Toughness of Fiber Composites - 31 January 2014

MPC20130032: Nano-Halloysite Concentration Effects on Fracture Toughness of Diverse Epoxy Nanocomposites - 17 January 2014

MPC20130071: Wire Cutting Method to Assess Fracture Toughness of Gelatin Gels: Phenomenological Analysis and Limitations of Methodology - 17 January 2014

JTE20120342: Effect of Peel Side on Optimum Condition for Measuring Flexible Film Peel Strength in T-Peel Adhesion Test - 01 January 2014

MPC20130006: Prediction of Mechanical Properties of Nano-Composites Using Vibration Modal Analysis: Application to Aluminum Piston Alloys - 13 December 2013

JTE20120224: Preliminary Evaluation of the Ergonomic Properties of Gloves for Protection Against Mineral Oils Based on Manual Dexterity Tests - 01 November 2013

GTJ20120041: Suction of Some Polyethylene Glycols Commonly Used for Unsaturated Soil Testing - 01 September 2013

JTE20120235: Method for Dynamic Material Property Characterization of Soft-Tissue-Mimicking Isotropic Viscoelastic Materials Using Fractional Damping Models - 01 September 2013

JTE20120292: Engineering Properties of Prime Coats Applied to a Granular Base - 01 September 2013

JTE20120002: Development of a Composite Specimen Interface Cracking (CSIC) Test for Top-Down Cracking - 01 July 2013

JTE20120023: An Evaluation of the Non-Isothermal and Isothermal Pyrolysis of Polyether Sulfone in Thermogravimetric Analysis - 01 July 2013

JTE20120227: Determination of Dry Rubber Content in Natural Rubber Latex Based on Wavelet-Domain Fluorescence Image - 01 July 2013

JTE20120228: Carboxyl Modification of Sugarcane Bagasse Hemicelluloses With Succinic Anhydride in Aqueous Solution - 01 May 2013

JTE20120008: Study on Glass Defect Inspection Based on Projecting Grating Method - 01 March 2013

MPC20120028: The Influence of Varying Cell Sizes on the Tensile Behaviour of Open-Cell Foams - 06 February 2013

JTE20120006: Measuring Mechanical Properties of the 3D Carbon/Carbon Composite Using Automated Grid Method - 01 January 2013

JTE20120161: Understanding Melt Index and ASTM D1238 - 01 January 2013

JTE104379: Investigation on the Flammability of Diverse Cast PA6 Semi-Finished Products - 01 November 2012

JTE104460: Evaluation of Ice-Melting Capacities of Deicing Chemicals - 01 November 2012

JTE103615: Development of Standard Laboratory Testing Procedures to Evaluate the Performance of Deicers - 01 November 2012

JTE20120092: Sensing Properties of Carbon Nanotube–Carbon Fiber/Cement Nanocomposites - 01 September 2012

MPC104531: Computational Simulation of the Influence of Inert Particles on Incomplete Combustion of Methane at a Low Air Factor - 01 September 2012

MPC104541: Crack Propagation Behavior of Silicon Nitride Using a Ball-on-Flat Rolling Fatigue Bench Test Methodology - 01 July 2012

JAI104320: Use of Ultrasound Thermometry to Study Natural Convection in Opaque Nanofluids - 01 May 2012

JAI104091: A Systematic Approach to the Study of Accelerated Weathering of Building Joint Sealants - 01 May 2012

JAI104101: Weathering Evaluation of Structural Silicone Sealants Used in Korea - 01 May 2012

JTE104285: Microstructure Characterization of Mesoporous Materials by FE-SEM - 01 May 2012

JTE104431: The Creep Testing Apparatus (CRETA): A New Testing Device for Measuring the Viscoelasticity of Joint Sealant - 01 May 2012

JTE104159: Solvothermal Synthesis of High Yield CdS Nanowires in Ethylenediamine - 01 May 2012

JAI104088: Outline of Testing and Evaluation Program Used in Selection of Adhesives for Transparent Adhesive Joints in All-Glass Load-Bearing Structures - 01 April 2012

JAI104302: Naphthalene Sorption to Organic Additives in Cement-Treated Soils - 01 April 2012

JAI104144: Seismic Racking Test Evaluation of Silicone Used in a Four-Sided Structural Sealant Glazed Curtain Wall System - 01 March 2012

JTE103336: Characterization of Carbon Black Particles Mixing in Polymeric Matrix by Direct Methods - 01 March 2012

JTE104067: Non-contact and Non-destructive Analysis of the Quality of Phenolic Resin by Near-Infrared Spectroscopy - 01 March 2012

JAI104090: A Test Method for Monitoring Modulus Changes during Durability Tests on Building Joint Sealants - 01 February 2012

JAI104092: Moisture Sensitive Adhesives and Flooring Adhesive Failures - 01 February 2012

JAI104048: Attempt at Quantification of Surface Degradation and Evaluation of Relationship between Outdoor and Accelerated Exposure of Construction Sealants - 01 January 2012

JAI104064: Evaluation of Sealed Joint Performance for the Selection of Sealants Suitable for Use in Autoclaved Lightweight Concrete Panels - 01 January 2012

JAI104142: In Situ Measurement of Compression Set in Building Sealants During Outdoor Aging - 01 January 2012

JTE103455: Experimental Procedure for the Mechanical Evaluation of Oxide-Carbon Refractories by Strain Measurement - 01 January 2012

JTE103618: Effects of an Amine Anti-Stripping Agent on Moisture Susceptibility of Sasobit and Aspha-Min Mixes by Surface Free Energy Analysis - 01 January 2012

JAI103724: Evaluation of a Modified Guar OD Formulation for Spray Drift Mitigation - 01 November 2011

JAI104084: Preliminary Evaluation of the Mechanical Properties and Durability of Transparent Structural Silicone Adhesive (TSSA) for Point Fixing in Glazing - 01 November 2011

JTE104031: Evaluation of Predicted Deceleration Values From the Stress-Energy Method Compared to Actual Deceleration Values From the ASTM D1596 Test Method - 01 November 2011

JAI103449: Novel Alkyl Polyglucoside Surfactant Derivatives for Improving the Infiltration of Irrigation Water into Repellent Soil - 01 October 2011

JAI103523: Application of ASTM Standard Practice D6602 in the Investigation of Outdoor Environmental Surface Particulate Including Darkening Agents - 01 October 2011

JAI103411: Beryllium Measurement by Optical Fluorescence in Samples Contaminated by Strongly Fluorescent Impurities - 01 September 2011

JAI103480: Developing Acceptable Surface Limits for Occupational Exposure to Pharmaceutical Substances - 01 September 2011

JAI103719: Round-Robin Evaluation of ASTM Standard Test Method E2798 for Spray Drift Reduction Adjuvants - 01 September 2011

JAI103960: Ways of Improving the Interfacial Durability of Silicone Adhesives in Building Applications - 01 September 2011

JTE103337: Characterization of Carbon Black Particles Dispersion in Polymeric Matrix by Indirect Methods - 01 September 2011

JTE103768: The Atom Transfer Radical Polymerization of Methyl Methacrylate in Ionic Liquid Media of 1-Methylimidazolium Alkyltes - 01 September 2011

JAI103263: Effect of Additional Elements on Microstructure and Properties of CrN Coatings - 01 July 2011

JAI103266: Influence of Structure on Brittleness of Boron Nitride Coatings Deposited on Cemented Fine-Grained Carbides - 01 July 2011

JAI102839: North America’s Cinderella Pipe Story: A Look at PVC Pipes’ Climb to the Top - 01 July 2011

JAI103272: Impact Wear Performance of Thin Hard Coatings on TiC Cermets - 01 July 2011

JTE103198: Spatial Distribution of the Compressive Stress-Strain of Recycled Polymeric Piling - 01 July 2011

JTE103205: Standardized Polymer Durometry - 01 July 2011

JTE103318: Comparative Evaluation of the Moisture Permeation of Polyurethane, Polyethylene, and Fluoropolymer Tubing - 01 July 2011

JTE103132: Evaluation of Tensile Strength of Woven Carbon/Epoxy Composite Laminates at Cryogenic Temperatures Using the Open Hole Specimens - 01 July 2011

JAI103452: Boiling Heat Transfer of Butanol Aqueous Solution-Augmentation of Critical Heat Flux - 01 June 2011

JAI102693: A Brief History of the Development and Growth of the Corrugated Polyethylene Pipe Industry in North America - 01 June 2011

JAI103368: Polyalkylene Glycols as Next Generation Engine Oils - 01 June 2011

JAI103443: Approaches towards Design of Green Matrices to Formulate Agricultural and Bio-active Materials and Provide Improved Efficacy - 01 June 2011

JAI103716: A New Environmentally Friendly Solvent of Low Toxicity for Crop Protection Formulations - 01 June 2011

JAI103481: Use of Direct Reading Surface Sampling Methods for Site Characterization and Remediation of Methamphetamine Contaminated Properties - 01 June 2011

JAI102337: Size Effect Related to Composite Toughness Characterization - 01 May 2011

JAI103367: Characterization of the Effects of Droplet Size, Air Blast Strength, and Angle on Spray Distribution and Efficacy of a Buffalo Turbine Barrier Treatment Sprayer - 01 May 2011

JAI103400: Novel Formulations of an Organic Acid Herbicide - 01 May 2011

JAI103457: Field Scale Evaluation of Spray Drift Reduction Technologies from Ground and Aerial Application Systems - 01 May 2011

JAI103729: A Test Method for Evaluating Water Conditioning Adjuvants - 01 May 2011

JTE102572: Experimental and Finite Element Analysis of the API RP60 Test - 01 May 2011

JTE103190: Kinetic Analysis of Thermally Simulated Processes in Biopolymer Poly(3-Hydroxybutyrate) - 01 May 2011

JTE103280: Preparation, Characterization, and Evaluations of Polyurethane Elastomers Based on Polyether Glycol, Toluene Diisocyanate, and Extender Chain Reagents - 01 May 2011

JAI103461: Effects of Air Speed and Liquid Temperature on Droplet Size - 01 April 2011

JAI103468: Development of Botanical Pesticides for Public Health - 01 April 2011

JAI103445: Emulsification Performance Used for NPE Replacement in Solvent-Based Formulations - 01 March 2011

JAI103545: WG and WP Formulations of Captan with Polymeric Surfactants - 01 March 2011

JAI103619: A Fluorescent Tracer Method for Evaluating Spray Transport and Fate of Field and Laboratory Spray Applications - 01 March 2011

JTE103037: Pore Independent Crack Propagation of Glass-Alumina Functionally Graded Materials - 01 March 2011

JTE102753: Analysis of Fracture in Aluminum Joints Bonded with a Bi-Component Epoxy Adhesive - 01 March 2011

JTE102768: Experimental Techniques for Evaluation of Fatigue Characteristics of Laminated Constructions from Composite Materials: Full-Scale Testing of the Helicopter Rotor Blades - 01 March 2011

JAI103273: Accurate Determination of System Compliance and Young’s Modulus for Single Fibers - 01 February 2011

JAI103252: The New EU Directives Requirements and the Innovation in Pesticide Application Techniques - 01 February 2011

JAI103378: Forced Convective Boiling of Ethylene Glycol/Water Mixtures Inside a Small Tube - 01 February 2011

JAI102793: Improving Formulations for Biopesticides: Enhanced UV Protection for Beneficial Microbes - 01 January 2011

JTE102940: Validation Through Finite Element Simulation of the Behaviour of a Polyurethane Shock Absorber Under In-Service and Extreme Conditions - 01 January 2011

JAI102805: After 30 Years, How ASTM E35.22 and Gandy Company Have Survived Change - 01 November 2010

JAI102884: Assessment of Oil Dispersion Pesticide Formulations Using Rheology and Near Infrared Centrifugation Techniques - 01 November 2010

JAI103040: Modeling the Spray Atomization of Emulsion Embedded Agricultural Solutions - 01 November 2010

JTE102798: A New Numerical Analysis for Edge Defects in Rectangular Sheet - 01 November 2010

JAI103047: Joint Inerts Task Force: Partnership of Suppliers and Registrants to Defend Inert Ingredients within United States Regulatory System - 01 October 2010

JAI102797: Validation Testing of Drift Reduction Technology Testing Protocol - 01 October 2010

JAI102800: Development of a Novel Solvent-Based Formulation for Pesticides That Are Prone to Crystallization - 01 October 2010

JAI102819: Application of New Solid Polymeric Dispersant, Easy-Sperse® P-20 (Spray-Dried Polymer Composites) in Suspension Concentrates and Water Dispersible Granule Formulations—Improvement in Suspensibility and Rain-fastnesss - 01 October 2010

JAI102893: OD Formulations Structured with Self-Activating Organically Modified Clays - 01 October 2010

JAI102820: Spray Drift Reduction Evaluations of Spray Nozzles Using a Standardized Testing Protocol - 01 September 2010

JAI103050: Explosion Cladding: An Enabling Technology for Zirconium in the Chemical Process Industry - 01 September 2010

JTE102778: A Novel Measurement System for Dry Rubber Content in Concentrated Latex Based on Y-Type Optical Fiber - 01 September 2010

JAI102874: Chemical Clustering for Risk Assessment: Fatty Alcohol Alkoxylates - 01 July 2010

JAI102892: Granular Formulations and Active Ingredient Distribution from a Rotary Spreader - 01 July 2010

JAI102902: Spray Drift Reduction Technology Adjuvant Evaluation - 01 July 2010

JAI102776: Simulating and Characterizing Agricultural Ground Applications for Soil VOC Deposition Studies - 01 July 2010

JTE102696: Water Vapor Sorption Isotherms for Southern Pine Treated with Several Waterborne Preservatives - 01 July 2010

JTE102682: Effect of Variations in Practice of ASTM D7522 Standard Pull-Off Test for FRP-Concrete Interfaces - 01 July 2010

JAI102580: Immobilization of Cellulase and Hemicellulases on Porous Glass Beads - 01 June 2010

JAI102770: Spray Solution pH and Glyphosate Activity - 01 June 2010

JAI102771: Analysis of Impact of Various Factors on Downwind Deposition Using a Simulation Method - 01 June 2010

JAI102775: Evaluation of Spray Drift Using Low-Speed Wind Tunnel Measurements and Dispersion Modeling - 01 June 2010

JAI102869: Effect of Hard Water and Ammonium Sulfate on Weak Acid Herbicide Activity - 01 June 2010

JAI102898: EW Formulations Using Polymeric Surfactants - 01 June 2010

JTE101942: Rubber-Filler Interactions and Its Effect in Rheological and Mechanical Properties of Filled Compounds - 01 May 2010

JAI102582: Review of Key Research Efforts to Make Algae Fuels Sustainable - 01 April 2010

JAI102681: Fractography of ASTM D2512 Tested Polymeric Isotropic Material Residuals Generated External to the Impacting Indenter - 01 April 2010

JAI102900: Variability in the Material Properties of Polymer Matrix Composites for Marine Structures - 01 April 2010

JAI102606: Effect of the HVOF Deposition Process in the Chemical Composition of Tungsten Carbide Layers with Cobalt or Nickel Binders - 01 March 2010

JTE102261: Characterization of Mechanical Properties of a Shock Absorber Polyurethane Foam for Elevators. Numerical Fitting of Mechanical Behavior Models for Hyperelastic and Elastomeric Foam Materials - 01 March 2010

JAI102619: Recommendations for an ASTM Standardized Test for Determining GIIc of Unidirectional Laminated Polymeric Matrix Composites - 01 February 2010

JAI102303: Measuring Properties for Material Decomposition Modeling - 01 January 2010

JAI102186: Selective Review of Weathering Tests for Sealants and Thoughts on the Development of Novel Test Concept Based on Simultaneous Weathering and Movement - 01 January 2010

JAI102734: New Weathering Test Method for Sealants and Preliminary Experimental Results - 01 January 2010

GTJ102375: A Transparent Water-Based Polymer for Simulating Multiphase Flow - 01 January 2010

JTE102432: Ultrasonic Monitoring Technology for Polymer Compounding Extrusion - 01 January 2010

JAI102306: Determination of Time Required for Materials Exposed to Oxygen to Return to Reduced Flammability - 01 November 2009

JAI101982: Experimental Evaluation of Ultraviolet and Visible Light Curing Acrylates for Use in Glass Structures - 01 October 2009

JAI101990: Resistance of Adhesive Bonding of Ultra-High Performance Concrete to Hygrothermal, Corrosive, and Freeze-Thaw Cycling Environments - 01 October 2009

JAI102149: A Predictive Solubility Tool for Pesticide Emulsifiable Concentrate Formulations - 01 October 2009

JAI102215: Chlorine Trifluoride Exposure Testing and Oxidizer Reactivity Results - 01 October 2009

JAI102053: Field Performance and Accelerated Weathering of High Performance Acrylic and Polyurethane Sealants for Tilt-Up Applications - 01 September 2009

JAI102148: Selection of Sequestering Agents Having Affinity for Calcium Ion for Stabilization of the Emulsifiable Concentrate Formulations - 01 September 2009

JAI102244: Oxygen Compatibility of Brass-Filled PTFE Compared to Commonly Used Fluorinated Polymers for Oxygen Systems - 01 September 2009

JAI102262: Ignition Sensitivity of Nonmetallic Materials in Oxygen-Enriched Air (NITROX): A Never Ending Story in SCUBA Diving? - 01 September 2009

JAI102309: The Importance of Quality Assurance and Batch Testing on Nonmetallic Materials Used for Oxygen Service - 01 September 2009

JTE000380: Comparison of Performance of Asphalt Mixtures Containing Polymer Modifiers - 01 September 2009

JAI101984: Cleaning Silicone Residue from Glass - 01 July 2009

JAI102038: Evaluation of the Durability Potential of Silyl Terminated Polyacrylate Based Construction Sealant - 01 July 2009

JAI102285: Effect of Oxygen Concentration on Autogenous Ignition Temperature and Pneumatic Impact Ignitability of Nonmetallic Materials - 01 July 2009

JTE102271: Measurement and Simulation of Thermal Stability of Poly(Lactic Acid) by Thermogravimetric Analysis - 01 July 2009

JAI102048: Water Penetration of Cladding Components—Results from Laboratory Tests on Simulated Sealed Vertical and Horizontal Joints of Wall Cladding - 01 June 2009

JAI102125: Development and Testing of a Laboratory Spray Table Methodology to Bioassay Simulated Levels of Aerial Spray Drift - 01 June 2009

JAI102151: Stabilization of Suspension Concentrate Formulations via Specialized Double-comb Polymers - 01 June 2009

JAI102156: The Effect of Adjuvants, Pesticide Formulation, and Spray Nozzle Tips on Spray Droplet Size - 01 June 2009

JAI102163: Imazapyr Absorption and Translocation in Northern Red Oak and Red Maple as Affected by Herbicide Formulation and the Adjuvant Methylated Seed Oil - 01 June 2009

JAI102135: The Influence of Tank Mix Additives While Making Low Volume Aerial Fungicide Applications - 01 May 2009

JAI102145: Antifoaming and Defoaming in Agricultural Tank Mixes: Revisiting, Revising, and Reviving a Method - 01 May 2009

JAI102147: Glyphosate Weed Control Enhancement with Ammonium Sulfate and Commercial Water Conditioning Agents - 01 May 2009

JAI102153: Multiple Metal Cations as Spray Deposit Tracers and Evaluation of the AGDISP Ground Boom Spray Drift Model - 01 May 2009

JAI102238: Effect of Processing Shear Time on EW Formulations - 01 May 2009

JTE101649: Flexural Strength of Ceramic and Glass Rods - 01 May 2009

JAI101946: Long-Term Outdoor Weathering Study of Construction Sealants - 01 April 2009

JAI101965: An Attempt at Finding a Correlation Between Environmental and Accelerated RILEM TC 139-DBS Weathering for One-Component Polyurethane Sealants Applied on Mortar - 01 April 2009

JAI102122: Evaluation of a Proposed Drift Reduction Technology High-Speed Wind Tunnel Testing Protocol - 01 April 2009

JAI102129: Evaluation of the EPA Drift Reduction Technology (DRT) Low-Speed Wind Tunnel Protocol - 01 April 2009

JAI101597: Fungicides Associated with Two Adjuvant Formulations for Preventive and Curative Soybean Rust Control - 01 March 2009

JAI101816: A Complete System for Testing and Evaluation of Quenchants and Quenching Systems - 01 March 2009

JAI101932: Adhesion Development of Organic and Silicone Sealants on Wet and Dry Concrete - 01 March 2009

JAI101961: Joint Sealing Systems for Pavements—A New Approach Towards a Performance Related Evaluation of Capability and Durability - 01 March 2009

JAI101975: Using Rheology Test Methods to Assess Durability of Cured Elastomers Undergoing Cyclic Deformation - 01 March 2009

JAI101976: Development of Accelerated Aging Test Methodology and Specimen for Bonded CFRP Systems - 01 March 2009

JAI102009: Substrate Durability Guidelines Used in Silicone Structural Attachment - 01 March 2009

JTE101714: v-K Curves from Lifetime Tests with Reloaded Survivals - 01 March 2009

JTE101875: Evaluation of the Shear Modulus of Elastomeric Bridge Bearings Using Modal Data - 01 March 2009

JAI101912: Relative Resistance of Silicone and Si-Hybrid Based Sealants to Alternating Periods of Accelerated Weathering and Thermo-Mechanical Movements - 01 February 2009

JAI101949: Quantification of Effect of Enforced Cyclic Movement and Regional Exposure Factors on Weatherability of Construction Sealants - 01 February 2009

JAI101953: Evaluation of Silicone Sealants at High Movement Rates Relevant to Bomb Mitigating Window and Curtainwall Design - 01 February 2009

JAI101954: Effect of Strain on the Modulus of Sealants Exposed to the Outdoors - 01 February 2009

JAI101956: Durability by Design: New Results on Load-Carrying Silicone Bonding - 01 February 2009

JAI101491: Evaporation of Pesticide Droplets on Surfaces Under Various Relative Humidity Conditions - 01 January 2009

JAI101652: Morpholine Amide Solvent: A New Inert - 01 January 2009

JAI101814: Study on Antioxidative Synergism of Molybdenum Dialkydithiocarbamate with Alkylated Diphenylamine Antioxidants - 01 November 2008

JTE101899: Effect of Coating Variables on Total Solar Reflectance and Emissivity of Polymer-Coated Metal Panels - 01 November 2008

JAI101347: Use of the Accelerated Mortar Bar Test to Evaluate the Effectiveness of LiNO3 Against Alkali-Silica Reaction—Part 1: Pore Solution Chemistry and Influence of Various Parameters - 01 September 2008

JAI101352: Use of the Accelerated Mortar Bar Test to Evaluate the Effectiveness of LiNO3 Against Alkali-Silica Reaction—Part 2: Comparison with Results from the Concrete Prism Test - 01 September 2008

JAI101637: Development of a Multimedia Model for the Fate Prediction of Hydrocarbon Fluids in Agrochemical Formulations - 01 September 2008

JAI101639: Concentrations of Selected Chemical Species in the Airliner Cabin Environment - 01 September 2008

JAI101721: Effects of Water Immersion on Building and Civil Engineering Joints and the Use of the Arrhenius Method in Predicting Adhesion Lifetime of Water-Immersed Joints - 01 September 2008

JTE101517: Analysis of Major, Minor Constituents and Various Phases in Carbon Brush by Classical Gravimetry, Titremetry, and by Instrumental Method - 01 September 2008

JAI101624: Heat Treatment and Interface Effects on the Mechanical Behavior of SiC-Particle Reinforced Aluminium Matrix Composites - 01 July 2008

JAI101502: Novel Delivery Systems for Integrated Pest Management - 01 July 2008

JAI101583: Assessment of the Ozone Formation Potential from Pesticide Solvents Using a Mobile Ozone Chamber Assay Approach - 01 July 2008

JAI101585: Investigating the Use of Hydrocarbon Fluids in Seed Treatment Formulations - 01 July 2008

JTE101288: A Test Fixture for Fully Reversed Axial Fatigue Characterization of Composites - 01 July 2008

JTE101443: Influence of Friction in Simple Upsetting and Prediction of Hardness Distribution in a Cold Forged Product - 01 July 2008

JAI101363: C-Crack Initiation in Quasi-Static and Impact Loading of a Bearing-Grade Silicon Nitride - 01 June 2008

JAI101233: Spray Adjuvant Effects on Droplet Size Spectra Measured by Three Laser-Based Systems in a High-Speed Wind Tunnel - 01 June 2008

JAI101156: Finite Element Modeling of the Effects of Delamination Damage on the Natural Frequencies of Composite Panels - 01 May 2008

JAI101615: Comparison of ASTM and CIPAC Suspension Methods - 01 May 2008

JTE101402: Simple Expressions for the Evaluation of Stresses in Sphere-Loaded Disks Under Biaxial Flexure - 01 May 2008

JAI101572: A Unique Formulation of Glyphosate in the Acid Form - 01 April 2008

JAI101227: Wear and Friction Testing of Hard and Soft Lubricious Coatings in Dry Sliding for Use in Small Arms Action Components - 01 February 2008

JAI100891: Formulation Performance Improvements with Blends of Alkyl Naphthalene Sulfonate Condensates Plus Lignosulfonates When Compared to Lignosulfonates Alone - 01 February 2008

JAI101223: Tribochemistry of Multiply Alkylated Cyclopentane Oils on Diamond-like Carbon (DLC) Coated Thrust Bearings - 01 January 2008

JAI101493: Collection Efficiencies of Various Airborne Spray Flux Samplers Used in Aerial Application Research - 01 January 2008

JTE100202: Sample Preparation and Testing Methods for the Evaluation of Microcrystalline Waxes for the Seismic Protection of Art Objects - 01 January 2008

JTE100823: Strength of a Ceramic Sectored Flexural Test Specimen - 01 January 2008

JTE101020: LOX Compatible Toughened Bismaleimide Matrix Thermally Conductive Fiber Composites Part I: Composite Fabrication Viability And Thermal Conductivity Measurement - 01 January 2008

JTE101021: LOX Compatible Toughened Bismaleimide Matrix Thermally Conductive Fiber Composites Part II: ASTM D2512 Specimen Fabrication, Cleaning And Testing - 01 January 2008

JTE100975: Pressure Effects on Oxygen Concentration Flammability Thresholds of Polymeric Materials for Aerospace Applications - 01 January 2008

JAI100396: Attapulgite as a Thixotropic Suspending Agent - 01 November 2007

JAI100926: Mechanochemical Additive-Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces - 01 November 2007

JAI100956: Design of Functionalized PAMA Viscosity Modifiers to Reduce Friction and Wear in Lubricating Oils - 01 November 2007

JTE100793: A Critical Review of the Diametral Compression Method for Determining the Tensile Strength of Spherical Aggregates - 01 November 2007

JTE100677: Production of Aluminum-Silicon Carbide Composites Using Powder Metallurgy at Sintering Temperatures Above the Aluminum Melting Point - 01 November 2007

JAI100880: Fluorescence Imaging as a Non-Invasive Technology to Monitor the Performance of Glyphosate Adjuvants and Formulations - 01 October 2007

JAI101079: Surface Characterization Techniques in Wear of Materials - 01 October 2007

JAI100686: Heavy-Duty Diesel Engine Cavitation Test - 01 September 2007

JAI101332: The Effect of Polymeric, Ammonium Sulfate-Based Adjuvants on the Deposition of Glyphosate Spray Solutions - 01 September 2007

JAI100912: Synergistic Tribological Performances of Borate Additive in Lubricants - 01 September 2007

JTE100831: Measurement of Strain Distribution and Material Flow in Bulk Deformation by the Screw Method - 01 September 2007

JAI100516: New Ceramifying Polymer Materials for Passive Fire Protection Applications - 01 July 2007

JAI100905: Alkyl-Capped Block Copolymer Surfactants for Remediation of Soil Water Repellency and Heterogeneous Rootzone Moisture - 01 July 2007

JAI100909: Controlled Release Pellet Formulation - 01 July 2007

JAI100849: A Review of Engine Oil Oxidation Bench Tests and Their Application in the Screening of New Antioxidant Systems for Low Phosphorus Engine Oils - 01 July 2007

JAI100937: Study of the ZDDP Antiwear Tribofilm Formed on the DLC Coating Using AFM and XPS Techniques - 01 July 2007

JTE100081: Tensile Creep Studies on Filled Polychloroprene Elastomer - 00 July 2007

JTE100543: An Experimentally-Based Analytical Model of the Stress Field in an Iosipescu Composite Test Specimen - 00 July 2007

JTE100688: A New Biaxial Tension Test Fixture for Uniaxial Testing Machine—A Validation for Hyperelastic Behavior of Rubber-like Materials - 00 July 2007

JAI100368: Coolant Development in Asia - 01 June 2007

JTE100089: Short-Beam-Shear Testing of Composite Rings With Variable Cross Section as Representative for Full-scale Delamination - 01 May 2007

JTE100080: Bitumen Surface Energy Characterization byqa Inverse Gas Chromatography - 01 May 2007

JAI100906: Managing Aldicarb Application with GPS/GIS Systems - 00 May 2007

JTE100477: Methodology of Lifetime Predictionqa in Polymer Aging - 00 May 2007

JAI100776: Strength of Quasi-Isotropic Co-Cured Composite Joints Under Quasi-static and Fatigue Loading - 00 April 2007

JAI100271: Effect of Penetrator Size on Dynamic Failure Response of Woven Graphite Epoxy Composites around the Critical Perforation Energy - 00 April 2007

JAI100366: Accelerated Oxidation and Corrosion Testing of Engine Coolants Using a Rotary Pressure Vessel Oxidation Test - 00 April 2007

JAI100634: Comparison of Bench Test Methods to Evaluate Heavy Duty Coolant Thermal Stability - 00 April 2007

JAI100892: Use of a Soil Surfactant with Fungicides for Control of Fairy Ring Disease in Turfgrass - 00 April 2007

JAI100908: New Polymeric Comb Dispersants for Agricultural Formulations: A Comparison of Performance in Pesticide Suspension Concentrates - 00 April 2007

JAI100941: Additive and Base Oil Effects in Automatic Particle Counters - 00 April 2007

JAI100528: Fast Scan Differential Scanning Calorimetry Distinguishes Melting, Melting-Degradation/Sublimation and Thermal Stability of Drugs - 00 March 2007

JAI100547: Thermal and Oxidative Properties of Physiologically Relevant Free Fatty Acids by Dielectric Analysis and Differential Scanning Calorimetry - 00 March 2007

JAI100394: Development of an ASTM Method for Measurement of the Extensional Viscosity of Agricultural Spray Solutions - 00 March 2007

JAI100521: Compatibility Testing of Multi-Vehicle Coolant Chemistries - 00 March 2007

JAI100554: Effect of Chemical Admixtures on Rheology of Cement Paste at High Temperature - 00 March 2007

JAI100615: A Comparison of Membrane Technologies for Engine Coolant Recycling - 00 March 2007

JAI100754: Novel Adjuvants for Targeting Pesticide Delivery - 00 March 2007

JAI100872: Microencapsulated Clomazone: Formulation Stability, Tank Mix Volatility, and Solvent Effects - 00 March 2007

JAI100887: New Solvents for Agriculture—A Theoretical Modeling Approach - 00 March 2007

JAI100902: Glyphosate Adjuvant Formulation with Glycerin - 00 March 2007

JAI100904: Water Dispersible Granule Formulations Containing a New Defoaming Agent - 00 March 2007

JAI100933: Development of Fast Dissolving Concentrated Gibberellin Water Soluble Granular Formulations - 00 March 2007

JAI100367: Cavitation Protection Performance of Nitrite-Free Organic Acid Based Coolant for Heavy-Duty Engines - 00 February 2007

JAI100510: Field Test for Carboxylate Inhibitor Levels in OAT Coolants - 00 February 2007

JAI100616: Component Durability and High Mileage Performance of a Full Carboxylate Coolant in Heavy Duty Diesel (HDD) Engines - 00 February 2007

JAI13127: Study of Weatherability of Construction Sealants with Novel Testing Method - 00 February 2007

JAI13378: Proposed Design and Method for Providing Sealed Joint Performance under Relative Story Displacement - 00 February 2007

JAI100264: Cationic-based Crop Oil Concentrates - 01 January 2007

JAI100336: Heavy Duty Diesel Engine Coolant Technology: Past, Present, and Future - 01 January 2007

JAI100403: Development of a Practical Method to Evaluate the Fatigue Properties of Structural Silicone Glazing Adhesives - 01 January 2007

JAI100409: Formulating High Weatherability Sealants: Possibilities and Challenges - 01 January 2007

JAI100502: New Electrochemical Methods for the Evaluation of Localized Corrosion in Engine Coolants - 01 January 2007

JAI100421: Investigation of Interaction Between Coolant Formulations and Flux Loading/Compositions in Controlled Atmosphere Brazed (CAB) Aluminum Surfaces in Heat Exchanger Applications - 01 January 2007

JTE100144: Time-Dependent Reliability of Thermally Shocked SiC Tubes - 01 January 2007

JTE100072: Characterization and Simulation of the Creep Behavior of P92 Sandwich Structures at 923 K with Loading Transverse to the Intermediate Layer - 01 January 2007

JAI100297: The Effect of Latent Hardening on the Texture of 3004 Aluminum Deformed in Plane Strain, Predicted by an Explicit Dynamic Finite Element Analysis - 01 November 2006

JAI100431: Electrical and Mechanical Properties of Conducive Carbon Black/Polyolefin Composites Mixed With Carbon Fiber - 01 November 2006

JAI13036: New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites - 01 November 2006

JAI100325: Coolants at Elevated Temperatures - 01 November 2006

JAI100407: Seismic Performance of Two-Side Structural Silicone Glazing Systems - 01 November 2006

JAI100450: New Durable Sealant of Telechelic Polyacrylate - 01 November 2006

JAI100549: Hertzian Fracture, Kinetic Friction and the Mechanical Impact LOX Compatibility Testing of Polymers and Polymer Matrix Composites - 01 November 2006

JAI100505: Effect of Fluoride on Corrosion of Cooling System Metals in Ethylene Glycol-Based Antifreeze/Coolants - 01 November 2006

JTE100041: Performance Evaluation of PLA against Existing PET and PS Containers - 01 November 2006

JTE100047: Thermal Stability Testing of Refractory Specimen - 01 November 2006

JAI100285: Geometry and Data Reduction Recommendations for a Standardized End Notched Flexure Test for Unidirectional Composites - 01 October 2006

JAI100351: Characterization of Modified Carbon Nanotubes by TG-MS and Pyrolysis-GC/MS - 01 October 2006

JAI100253: A Tracer Method to Determine Extremely Low Wear Rates of Ultrahigh Molecular Weight Polyethylene - 01 October 2006

JAI100392: Impact of Adjuvants on Droplet Spreading and Droplet Deposit Area After Spray Application - 01 October 2006

JAI100428: Basics of Polymeric Scaffolds for Tissue Engineering - 01 October 2006

JAI13543: Flow Friction Fire History and Research - 01 October 2006

JAI13567: Proactive Mitigation of PCTFE-Related Ignition Hazards in Oxygen Systems: I. Development of a Voluntary Consensus Standard Specification to Control Property Variation in Finished PCTFE Parts - 01 October 2006

JAI13568: Proactive Mitigation of PCTFE-Related Ignition Hazards in Oxygen Systems: II. Testing of Inventoried “At-Risk” PCTFE Parts and Hazard Analyses of Corresponding Ground Service Equipment at the Kennedy Space Center - 01 October 2006

JAI100496: The Effects of Load Soak Control on the Wear of UHMWPE at Various Hydration Levels in a Joint Simulation Study - 01 October 2006

JAI100284: Effects of Particle Size and Shear Rate on Melt Flow Properties During Capillary Extrusion of Glass Bead-Filled LDPE Composites - 01 September 2006

JAI13193: An Investigation of Specimen Geometry Effects on the Fracture Behavior of a Polytetrafluoroethylene Polymer - 01 September 2006

JAI100255: Load Profile and Fluid Composition Influence the Soak Behavior of UHMWPE Implants - 01 September 2006

JAI100395: Nozzle-Adjuvant Formulation Interactions: Implications on Herbicide Efficacy - 01 September 2006

JAI13121: Quantification of Differential Thermal Movement in Insulating Glass Edge Seals Using Finite Element Analysis - 01 September 2006

JAI13136: Nondestructive Field Testing of Installed Weatherproofing Sealant Joints—Questions and Answers - 01 September 2006

JAI13538: Mechanical Impact Testing: Data Review and Analysis - 01 September 2006

JAI13679: Pneumatic Impact Ignition of Sebum Oil Film in High-Pressure Oxygen - 01 September 2006

JTE11589: An Alternative to a 3D Crack Monitor—4-Pin Algorithm - 01 September 2006

JTE14100: Evaluation of Adhesive Strength of Thin Plasma Sprayed Oxide Coatings by a Crosshatch Testing Method - 01 September 2006

JTE100056: Effectiveness of Seal Rejuvenators for Bituminous Pavement Surfaces - 01 September 2006

JAI13546: Oxygen Compatibility Assessment on Components and Systems - 01 July 2006

JAI13557: Frictional Ignition Testing of Composite Materials - 01 July 2006

JAI100558: Estimation of the Osteolytic Potential of Noncrosslinked and Crosslinked Polyethylenes and Ceramic-on-Ceramic Total Hip Prostheses - 01 June 2006

JAI13122: Use of Optical Imaging/Image Analysis System for the Quantitative Analysis of Surface Changes Induced by Outdoor Weathering on Sealants - 01 June 2006

JAI13528: Spray Retention Models for Arable Crops - 01 June 2006

JAI14178: The Effects of Implant Temperature on Lubricant Protein Precipitation and Polyethylene Wear in Joint Simulation Studies - 01 June 2006

JAI12822: Prediction of Effective Stiffness of a Cross-Ply Laminate with Transverse Matrix Cracks - 01 May 2006

JAI12497: Durability Testing of Polyurethane Foam Sealant in the Window-Wall Interface - 01 May 2006

JAI13525: Water Conditioner Adjuvant and Fertilizer Formulation Effect on Micronutrient-Glyphosate Tank Mixtures - 01 May 2006

JAI13527: Wind Tunnel Evaluation of Drift Reduction Potential and Spray Characteristics with Drift Retardants at High Operating Pressure - 01 May 2006

JAI13531: Ignition of a Composite Cylinder with Plastic Liner - 01 May 2006

JAI13552: Materials Compatibility with Nitrogen Trifluoride (NF3) - 01 May 2006

JTE12186: Instrumentation for Determining the Local Damping Capacity in Honeycomb Sandwich Composites - 01 May 2006

JTE12707: Tracking the Onset of Damage Mechanism in Ceria-based Solid Oxide Fuel Cells under Simulated Operating Conditions - 01 May 2006

JTE100121: High Frequency Dynamic Testing of Rubbers and Rubber to Metal Devices - 01 May 2006

JTE14238: Story of MEGADAC 200: Keeping 200-Channel Legacy Data Acquisition Hardware Running by Developing a New Software Interface - 01 May 2006

JAI12509: Impact Fracture Behavior of Hollow Glass Bead-Filled ABS Composites - 01 April 2006

JAI13895: A Thermal Analysis Method for Measuring Polymer Flammability - 01 April 2006

JAI13415: Reducing Modulus of Sealants to Improve Durability - 01 April 2006

JAI13537: Filtration of Gaseous or Liquid Oxygen in Industrial Applications and Associated Fire Risks - 01 April 2006

JAI12934: Damping Behavior of AI6061/Albite MMCs - 01 March 2006

JAI13558: Ignition of Combustion Modified Polyurethane Foam - 01 March 2006

JAI13885: Radio Frequency Plasma Treatment of PEEK Spinal Implants - 01 March 2006

JTE14067: Accelerated Aging on Sealants and a Quantificational Way to Evaluate the Durability - 01 March 2006

JAI12909: Development of a Dry Applied Dispersible Granular Pesticide Carrier - 01 February 2006

JAI12912: Use of Carbodiimides as Stabilizing Agents to Deliver Water—Labile Active Ingredients in Liquid Systems Including Aqueous Medium—Amitraz as a Case Study - 01 February 2006

JAI13117: Standards Development for Impermeable, Constructible, and Durable Waterproofing - 01 February 2006

JAI13391: Cleanliness Testing and Identification of Residues on Polymer Medical Devices - 01 February 2006

JAI12908: Field-Collected and AGDISP-Predicted Spray Flux from an Aerial Application - 01 January 2006

JAI12913: Suitable Adjuvant to Maximize Trifloxysulfuron Efficacy and Early Assessment of Herbicide Efficacy Using Chlorophyll Fluorescence - 01 January 2006

JAI12918: Surfactant-Enhanced Release of Permethrin from a Cellulosic Granular Carrier - 01 January 2006

JAI12922: Flight Line Variability in Rotary Atomizer Drop Size Distribution - 01 January 2006

JAI13188: Surface Roughness, Quasi-Static Fracture, and Cyclic Fatigue Effects on GFRP- and CFRP-Concrete Bonded Interfaces - 01 January 2006

JTE12615: Consolidation of Mechanically Alloyed Titanium Silicide using Polycarbosilane - 01 January 2006

JTE12640: On the Thick-Adherend Tensile Shear Test of Adhesive Technology—Limitations and Correction Methods - 01 January 2006

JTE12744: Some Issues Related to the Selection of Polymers for Aerospace Oxygen Systems - 01 January 2006

JAI12797: Characterization Of Epoxy Curing Using High Heating Rate DSC - 01 November 2005

JAI12800: Photo Thermal Micro-Spectroscopy — A New Method for Infared Analysis of Materials - 01 November 2005

JAI12954: SED Method of Measuring Yield Strength of Adhesives and Other Materials - 01 November 2005

JAI12914: Improving the Infiltration of Water through Repellent Soils Using Synergistic Surfactant Blends Based on Alkyl Glucosides and Ethylene Oxide-Propylene Oxide Block Copolymers - 01 November 2005

JAI13126: Reducing Tin and Aminosilane Concentration in Silicone Elastomeric Coating to Improve Its Durability - 01 November 2005

JAI13254: Use of Herbicides to Control the Spread of Aquatic Invasive Plants - 01 November 2005

JAI12789: Development and Evaluation of a TG/DTA/Raman System - 01 October 2005

JAI12794: Quantitative Mass Measurements from Mass Spectrometer Trend Data in a TG/MS System - 01 October 2005

JAI12953: A New Low Cost Method For Measuring the Viscoelastic Behavior of Adhesives - 01 October 2005

JAI12958: Advanced Methods of Coating Adhesion Testing - 01 October 2005

JAI12904: Development and Testing of a Recommendation System to Schedule Copper Sprays for Citrus Disease Control - 01 October 2005

JAI12911: Ethylenediamine Alkoxylates and Their Use as Adjuvants in Glyphosate Formulations - 01 October 2005

JAI12915: Characterization of Sulfonated Lignin Dispersants by Hydrophobic Interactive Chromatography - 01 October 2005

JAI12924: Nozzle Formulation Interactions: Consequences for Spray Droplet Adhesion to Plant Surfaces - 01 October 2005

JAI12957: Method for Quantifying Percentage Wood Failure in Block-Shear Specimens by a Laser Scanning Profilometer - 01 September 2005

JAI12377: Mechanical Properties of Cubic Silicon Carbide after Neutron Irradiation at Elevated Temperatures - 01 September 2005

JAI12916: Influence of Adjuvants on Weed Control from Tribenuron - 01 September 2005

JAI12921: Comparisons of Drift Reducing/Deposition Aid Tank Mixes for Fixed Wing Aerial Applications - 01 September 2005

JAI12928: Dearomatized Fluids Used in Phenoxy Herbicides for Right-of-Way Sprays - 01 September 2005

JAI13292: New Chemical Antistripping Additives for Bituminous Mixtures - 01 September 2005

JTE12668: Hoop Tensile Properties of Ceramic Matrix Composite Cylinders - 01 September 2005

JAI12952: Adhesive Bonding and Performance Testing of Bonded Wood Products - 01 July 2005

JAI12955: Characterizing Dynamic Fracture Behavior of Adhesive Joints under Quasi-Static and Impact Loading - 01 July 2005

JAI12159: Fluorescence Imaging for Investigating the Efficiency of Formulations, Adjuvants, and Application Systems - 01 July 2005

JAI12160: Improved Formulations through Synergistic Combinations Based on Alkyl Glucosides - 01 July 2005

JAI12172: Applications of Ether Amine Surfactants in Agricultural Formulations: The Known and Unexplored - 01 July 2005

JAI12175: The Effect of Dispersant Solubility, Dispersant Dosage, Granule Diameter, and Dome Versus Radial Extrusion on Granule Spontaneity of Disintegration and Resistance to Attrition - 01 July 2005

JAI12180: New Value-Added Polymeric Dispersants and Uses Thereof in Agricultural Formulations - 01 July 2005

JAI12181: Agricultural Granule Particle Size Considerations - 01 July 2005

JAI12946: Experimental Determination of Relative Permeability of Sand - 01 July 2005

JTE12617: Weibull Analysis Effective Volume and Effective Area for a Ceramic C-Ring Test Specimen - 01 July 2005

JAI12829: Acoustic ‘Distributed Source’ Mixing of Smallest Fluid Volumes - 01 June 2005

JAI12956: Interfacial Diffusion of Fluids in Pressure Sensitive Adhesives - 01 June 2005

JAI13110: Nanotechnology — An Introduction for the Standards Community - 01 June 2005

JAI12470: Performance of a New Co-Polymer Sulfonate-Based Mid-Range Water-Reducing Admixture - 01 June 2005

JAI12900: Factors Influencing the Performance of Spray Delivery Systems: A Review of Recent Developments - 01 June 2005

JAI12907: Increasing the Biological Activity of Weak Acid Herbicides by Increasing and Decreasing the pH of the Spray Mixture - 01 June 2005

JAI12917: Influence of Clethodim Formulation and Oil Adjuvants on Weed Control and Overcoming Herbicide Antagonism - 01 June 2005

JAI12925: Fatty Amine Alkoxylates as Effective Adjuvants for Strobilurin Fungicide Applications on Field and Orchard Crops - 01 June 2005

JAI12926: Fluorescent Intensity of Dye Solutions under Different pH Conditions - 01 June 2005

JAI12933: The Effect of Ammonium Nitrate, Coarse/Fine Ammonium Nitrate Ratio, Plasticizer, Bonding Agent, and Fe2O3 Content on Ballistic and Mechanical Properties of Hydroxyl Terminated Polybutadiene Based Composite Propellants Containing 20 % AP - 01 June 2005

JAI12959: Fracture Mechanics Applied to Adhesive Joints - 01 May 2005

JAI12961: Evaluation of Different Techniques for Adhesive Properties of Asphalt-Filler Systems at Interfacial Region - 01 May 2005

JAI12894: Understanding Polymeric Pads in Pre-CMP Conditioning - 01 May 2005

JTE12061: Estimation of the Uncertainty of Fe in Metallic Silicon Determined by Inductively Coupled Plasmas-Atomic Emission Spectroscopy - 01 May 2005

JAI12795: Separation of Overlapping Processes from TGA Data and Verification by EGA - 01 April 2005

JAI12156: Effect of Adjuvant on the Efficacy of Glyphosate Applied at Different Times of Day - 01 April 2005

JAI12157: A Novel Water Conditioning Adjuvant for Use with Formulated and Nonformulated Glyphosate - 01 April 2005

JAI12158: Evaluation of Some Adjuvants for Improving Glyphosate Efficacy - 01 April 2005

JAI12164: Predicted Deposition Variability Due to Fluctuations in Release Height and Drop Size Distribution - 01 April 2005

JAI12166: Improving the Effectiveness of Aerial Pesticide Sprays - 01 April 2005

JAI12167: Comparison of Abscission Spray Application Practices for Mechanical Harvesting of Oranges - 01 April 2005

JAI12936: The Effect of Aluminum Content Variation on Burning Rate, Pressure-Propellant Area Ratio Relationship, and Other Properties of Hydroxyl Terminated Polybutadiene Based Composite Propellants - 01 April 2005

JAI12565: Correlation Between Strength and Measured Residual Stress in Tempered Glass Products - 01 March 2005

JAI12161: Benefits of a 2,4-D Acid Herbicide Formulation - 01 March 2005

JTE11802: Fracture and Strength of Ceramic Notched Elements under Compression - 01 March 2005

JTE11944: Determination of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings - 01 March 2005

JAI12772: Differentiation of Damage and Failure Mechanisms of Co-Cured Fiber-Reinforced Composite Joints Using Acoustic Emission - 01 February 2005

JAI12884: Tensile, Flexural, and Shear Properties of Neutron Irradiated SiC/SiC Composites with Different Fiber-Matrix Interfaces - 01 February 2005

JAI12791: The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 1: Evaluation of Pure Forms - 01 January 2005

JAI12792: The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 2: Evaluation of Mixed Forms - 01 January 2005

JAI10933: Flexible Crumb Tire Rubber-Filled Cement Mortars as a Protective System for Buried Infrastructure - 01 January 2005

JAI12421: Plutonium-238 Alpha-Decay Damage Study of A Glass-Bonded Sodalite Ceramic Waste Form - 01 January 2005

JTE12521: Results of an Interlaboratory Study of the ASTM Standard Test Method for Tensile Properties of Polymer Matrix Composites D 3039 - 01 January 2005

CCA12314: Polycarboxylate Polymers and Blends in Different Cements - 04 December 2004

CCA12329: Cement and Superplasticizer Combinations: Compatibility and Robustness - 04 December 2004

JAI11863: Variations in the Mechanical Strength of a Composite Material of Thermoplastic Matrix Reinforced with Woven Glass-Fabric After Being Submitted to Diverse Damage Sequences: A Statistical Analysis - 01 November 2004

JTE12600: A Phenomenological Approach to Obtaining Correlations between Accelerated and Outdoor Exposure Test Results for Organic Materials - 01 November 2004

JAI11578: Predicting the Reliability of Ceramics Under Transient Loads and Temperatures with CARES/Life - 01 September 2004

JAI19030: Degradation Parameters and Two-Stress Block Fatigue of Angle-Ply Carbon Fiber Reinforced Epoxy - 01 September 2004

JTE12249: Mechanical Behavior of Polymers PBXW-128 and PBXN-110 Under Uniaxial and Multiaxial Compression at Different Strain Rates and Temperatures - 01 September 2004

JAI10986: Historical Development and Future Prospects of Structural Silicone Sealants in China - 01 July 2004

JAI11603: Material Properties for Use in FEA Modeling: Sealant Behavior with Ambient Laboratory Climate Aging - 01 July 2004

JAI11604: Effect of Float Glass Surface Composition on Silicone Sealant Adhesion Tested After Simultaneous Exposure to Hot Water and Ultraviolet Light - 01 July 2004

JAI11605: Artificial Weathering and Cyclic Movement Test Results Based on the RILEM TC139-DBS Durability Test Method for Construction Sealants - 01 July 2004

JAI11607: Issues Related to the Mechanical Property Characterization of Sealants - 01 July 2004

JAI11641: Estimation of the Fatigue Resistance of Sealants to Movement at Intersections of Sealed Joints and Improvements in the Joint Design Method - 01 July 2004

JTE11799: Stress Concentration Factor Formulas Useful for Any Dimensions of Shoulder Fillet in a Flat Test Specimen Under Tension and Bending - 01 May 2004

JTE11806: Residual Stress Measurement in Ion-Exchanged Glass by Iterated Birefringence and Etching - 01 May 2004

JTE11860: Some Problems in the Measurement of Dynamic Modulus of Viscoelastic Model Materials - 01 May 2004

JAI11907: Application of Moire Interferometry for Mode II Testing of Stitched Composites - 01 March 2004

JAI12076: A Test Method to Determine the Fiber and Void Contents of Carbon/Glass Hybrid Composites - 01 March 2004

JAI10983: Concepts for Development of a Service Life Prediction Methodology for Sealed Building and Construction Joints—Review and Roadmap for Future Research - 01 March 2004

JAI11601: Durability by Design: Load Carrying Silicone Bonding, Herz Jesu Church, Munich - 01 March 2004

JAI11609: Harmonization and Optimization of Weathering Test Methods for Building and Construction Sealants and Adhesives - 01 March 2004

JAI11620: Silyl-Terminated Polyurethanes for Construction Sealants - 01 March 2004

JAI11934: Fiber-Matrix Adhesion Measured By the Micro-Indentation Test: Data Reduction Based On Real Time Simulation - 01 March 2004

JTE11965: Evaluation of the Uniaxiality of the Stress State in C-Ring Fracture Strength Specimens - 01 March 2004

JAI11202: Generalized Size and Shape Description of UHMWPE Wear Debris — A Comparison of Cross-Linked, Enhanced Fused, and Standard Polyethylene Particles - 01 January 2004

JAI11207: Development of a Model for Testing Third Body Wear of UHMWPE Acetabular Components - 01 January 2004

JAI11217: The Effects of Raw Material, Irradiation Dose, and Irradiation Source on Crosslinking of UHMWPE - 01 January 2004

JAI11218: Multiaxial Fatigue Behavior of Oxidized and Unoxidized UHMWPE During Cyclic Small Punch Testing at Body Temperature - 01 January 2004

JAI11593: Wear and Structural Fatigue Simulation of Crosslinked Ultra-High Molecular Weight Polyethylene for Hip and Knee Bearing Applications - 01 January 2004

JTE12184J: Inverse Equivalent Elastic and Viscoelastic Loading Problems—Analytical and Computational Simulations of Experiments - 01 January 2004

JTE12374J: Experimental Study of the Strain Rate and Temperature Effects on the Mechanical Behavior of a Magnesium-Silicon Carbide Composite - 01 November 2003

JTE12376J: Evaluation of the Ignition Susceptibility of Plastics in Nitrogen Trifluoride (NF3) by Autogenous Ignition Testing - 01 November 2003

JTE12381J: Measurement of Lateral Deformation in Natural and High Damping Rubbers in Large Deformation Uniaxial Tests - 01 November 2003

JTE12372J: A Method for Assessing the Durability of Medical Examination Gloves - 01 November 2003

CTR10959J: Stress Corrosion Cracking in a Unidirectional E-Glass/Polyester Composite Subjected to Static and Cyclic Loading Conditions - 01 October 2003

CTR10960J: Wrinkling of Zebra Skin Sandwich Panels - 01 October 2003

CTR10961J: Refinements to the Mixed-Mode Bending Test for Delamination Toughness - 01 October 2003

CTR11035J: Calendar on Composites - 01 October 2003

CTR11036J: Composites Contents - 01 October 2003

JTE12365J: Shear Testing of Polymeric Foams - 01 September 2003

JTE12369J: Influence of the Geometry of the Extrusion Die on the Melt Strength of Polymers - 01 September 2003

JTE12177J: Fracture Toughness of Thin Polymer Films Using Miniature Specimens - 01 July 2003

CTR10956J: Influence of Temperature on the Fatigue Life of a Quasi-isotropic Gr/Ep Laminate - 01 July 2003

CTR10957J: Effect of Laminate Design and Loads on Crack Opening Volume in Laminates Used in Cryogenic Tanks - 01 July 2003

CTR10958J: Effect of Interfacial Bonding Strength on Thermal Expansion Behavior of Carbon-Fiber-Reinforced Copper-Matrix Composites - 01 July 2003

JTE12425J: Determining Minimum Ignition Energies and Quenching Distances of Difficult-To-Ignite Compounds - 01 May 2003

CTR10952J: Experimental Evaluation of Damping of Fiber-Reinforced Composites - 01 April 2003

CTR10953J: A Rational Procedure for Development of Hybrid Composite Masts - 01 April 2003

CTR10954J: Failure Analysis of Fiber-Reinforced Polymer Bridge Deck System - 01 April 2003

CTR10955J: Analytical Determination of Localized Heat Damage in Fiberglass Reinforced Resin Beams Using the Frequency Response Shifting - 01 April 2003

JTE12409J: Fracture Toughness Testing of Polymers Using Small Compact Specimens and Normalization - 01 March 2003

JTE12416J: Testing of Protective Organic Coatings on Metals: Comparison of Salt Spray and Electrochemical Impedance Spectroscopy - 01 March 2003

JTE12355J: The Wave-in-a-Tube Method for Estimation of Mechanical Properties of Viscoelastic Materials Using Ultrasound - 01 January 2003

JTE12359J: Finite-Element Analysis of Stress Concentration in ASTM D 638 Tension Specimens - 01 January 2003

CTR11001J: Mechanical Behavior of a Woven Graphite/PMR-15 Composite at Room and Elevated Temperatures Determined from the ±45° Tensile and Iosipescu Shear Tests - 01 January 2003

CTR11002J: An Efficient Analysis for the Debonding of Stitched Skin-Stiffened Structures - 01 January 2003

CTR11003J: Influence of Specimen Configuration and Size On Composite Transverse Tensile Strength and Scatter Measured Through Flexure Testing - 01 January 2003

CTR11004J: Analysis of Flexure Tests for Transverse Tensile Strength Characterization of Unidirectional Composites - 01 January 2003

CTR11005J: Tensile Stiffness and Strength of Regular Braid Composites: Correlation of Theory with Experiments - 01 January 2003

CTR10927J: Deflection Measurements of Laminated Thin Plates Using Electronic Speckle Pattern Interferometry - 01 December 2002

CTR10928J: A Statistical Approach for Optimizing the Fracture Toughness of a Composite Laminate - 01 December 2002

CTR10929J: The Effect of Material Heterogeneity on the Shock Response of Layered Systems in Plate Impact Tests - 01 December 2002

CTR10930J: End-Notched Flexure Testing and Analysis of Mode II Interlaminar Fracture Behavior of Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures - 01 December 2002

CTR10931J: Fiber Dominant Tensile and Creep Strength at 600°C of SCS-6 Fiber Reinforced Titanium Alloys - 01 December 2002

CTR10932J: Adhesion of Stainless Steel to Fiber Reinforced Vinyl Ester Composite - 01 December 2002

JTE12339J: Compression Loading Applied to Round Double Beam Fracture Specimens. I: Application to Materials with Large Characteristic Lengths - 01 November 2002

JTE12327J: Stress Concentration Factor Formulas Useful for All Notch Shapes in a Flat Test Specimen Under Tension and Bending - 01 September 2002

JTE12328J: Ring Hoop Tension Test (RHTT): A Test for Transverse Tensile Properties of Tubular Materials - 01 September 2002

JTE12332J: The Effect of Simulated Clinical Use on Vinyl and Latex Exam Glove Durability - 01 September 2002

JTE12326J: Evaluation of Bearing Capacity Improvement Using Composite Grids - 01 July 2002

CTR10566J: Adhesive Bonding of Composite Structures—Progress to Date and Some Remaining Challenges - 01 July 2002

CTR10567J: Efficient Adaptive Mesh Refinement Modeling of Adhesive Joints - 01 July 2002

CTR10568J: Three-Dimensional Effect in the Prediction of Flange Delamination in Composite Skin-Stringer Pull-off Specimens - 01 July 2002

CTR10569J: Strength and Fatigue Life Modeling of Bonded Joints in Composite Structure - 01 July 2002

JTE12306J: Photoelastic Evaluation of Stress Fields and Fracture During Dynamic Splitting Experiments - 01 May 2002

CTR10560J: The Design of In-Plane Shear and Tension-Loaded Bonded Composite Lap Joints - 01 April 2002

CTR10561J: Fatigue Life Methodology for Bonded Composite Skin/Stringer Configurations - 01 April 2002

CTR10562J: Characterization of Bondline Thickness Effects in Adhesive Joints - 01 April 2002

CTR10563J: Stress and Failure Analyses of Adhesive-Bonded Composite Joints Using ASTM D3165 Specimens - 01 April 2002

CTR10970J: The Design of In-Plane Shear and Tension-Loaded Bonded Composite Lap Joints - 01 April 2002

CTR10971J: Fatigue Life Methodology for Bonded Composite Skin/Stringer Configurations - 01 April 2002

CTR10972J: Characterization of Bondline Thickness Effects in Adhesive Joints - 01 April 2002

CTR10973J: Stress and Failure Analyses of Adhesive-Bonded Composite Joints Using ASTM D3165 Specimens - 01 April 2002

JTE12297J: Evaluation of the Uniaxiality of the Stress State in O-Ring Fracture Strength Specimens - 01 March 2002

JTE12283J: Synthesis of Methane Hydrate in an Unconsolidated Medium - 01 January 2002

JTE12285J: Flexural Characteristics of Sunlight-Aged Polyester Composites: Influence of Processing Variables - 01 January 2002

JTE12286J: An Apparatus for Evaluating Adhesion Between Soils and Solid Surfaces - 01 January 2002

JTE12289J: Effect of the Aging of the “Product/Package” System on the Mechanical Properties of Plastic Packaging - 01 January 2002

CTR10893J: Temperature Effects on Ultimate Bearing Strength of Polymeric Composite Joints - 01 January 2002

CTR10894J: A Design Procedure for Textile Composite Materials - 01 January 2002

CTR10895J: Surface Preparation Effects on Mode I Testing of Adhesively Bonded Composite Joints - 01 January 2002

CTR10892J: Comparison of the ±45° Tensile and Iosipescu Shear Tests for Woven Fabric Composite Materials - 01 January 2002

CCA10483J: Chemical Admixtures for Concrete - 01 December 2001

JTE12404J: Evaluation of Powdered Latex Medical Gloves Using ASTM D 6124-00 - 01 November 2001

CTR10996J: Low Degree of Homogeneity Due to Phase Shifts for Woven Composites - 01 October 2001

CTR10997J: Energy Absorption of Truncated Kevlar Epoxy Cones Under Off-Axis Loads - 01 October 2001

CTR10998J: Computational Tracking of Composite Manufacturing with Fiber Preforms - 01 October 2001

CTR10999J: Adaptation of the Iosipescu In-plane Shear Test Method for High Strength Textile Composites - 01 October 2001

CTR11031J: Composites Contents - 01 October 2001

JTE12275J: Stress Pattern Analysis by Thermal Emission of Plain Weave Carbon Fiber/Epoxy Resin Composite Iosipescu Specimens with Three Different Notch Angles - 01 September 2001

JTE12273J: Use of n-Propyl Bromide Solvents for Extraction and Recovery of Asphalt Cements - 01 September 2001

JTE12274J: Service Temperature Characterization of Polytetrafluoroethylene-Based Gaskets - 01 September 2001

JTE12269J: Notes on Direct Current Potential Drop Calibration for Crack Growth in Compact Tension Specimens - 01 July 2001

JTE12265J: A New Multiparameter Approach to the Prediction of Wear Rates in Agricultural Sprayer Nozzles - 01 July 2001

CTR10551J: A Technique for Measuring Delamination Crack Tip Behavior in Composite Materials Inside a Scanning Electron Microscope - 01 July 2001

CTR10552J: Interlaminar Deformation Along the Cylindrical Surface of a Hole in Laminated Composites—Experimental Analysis by Moiré Interferometry - 01 July 2001

CTR10553J: Strain Rate and Temperature Effects on the Mechanical Properties of an E-Glass/Vinyl Ester Composite System - 01 July 2001

CTR10554J: Shakedown Limits for a Metal Matrix Composite - 01 July 2001

CTR10555J: Failure Analysis of ±45° Off-Axis Woven Fabric Composite Specimens - 01 July 2001

CTR10556J: Effect of Twisting on Tensile Failure of Impregnated Yarns with Broken Filaments - 01 July 2001

JTE12255J: The Effects of Residual Stress, Loading, and Crack Geometry on SEPB Fracture Toughness Test Results - 01 May 2001

CTR10918J: Matrix Properties of Textile Reinforced Ceramic Matrix Composites Measured by Nanoindentation - 01 April 2001

CTR10919J: Biaxial and Triaxial Failure Strengths of 6061-T6 Aluminum and AS4/3501-6 Carbon/Epoxy Laminates Obtained by Testing Thickness-Tapered Cruciform Specimens - 01 April 2001

CTR10920J: Drilling Damage of GFRP and Residual Mechanical Behavior—Part I: Drilling Damage Generation - 01 April 2001

CTR10921J: Drilling Damage of GFRP and Residual Mechanical Behavior—Part II: Static and Cyclic Bearing Loads - 01 April 2001

CTR10914J: Delamination Growth and Thresholds in a Carbon/Epoxy Composite Under Fatigue Loading - 01 April 2001

CTR10915J: Bridging Stress Distributions During Fatigue Crack Growth in Continuously Reinforced [0] Metal Matrix Composites - 01 April 2001

CTR10916J: Abrasive Water Jet Machining Mechanisms in Continuous-Fiber Ceramic Composites - 01 April 2001

CTR10917J: Effects of Chemical Environments on Pultruded E-Glass Reinforced Polyesters - 01 April 2001

JTE12242J: A Powerful New Tool for Testing Adhesives In Situ - 01 March 2001

JTE12246J: A Finite Element Investigation into the Effect of a Skew Insert in a Double-Cantilever Beam Specimen on Calculating Mode I Delamination Fracture Energy of Unidirectional Composites - 01 March 2001

JTE12389J: Evaluation and Adjustments for ASTM D 5656 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading - 01 January 2001

JTE12390J: Weathering Effects on the Fracture Properties of Polyvinyl Chloride Pipes - 01 January 2001

JTE12392J: Overcoming Multicollinearity in Near Infrared Analysis for Lycopene Content Estimation in Tomatoes by Using Ridge Regression - 01 January 2001

CTR10908J: Evaluation of Film-Substrate Interface Durability Using a Shaft-Loaded Blister Test - 01 January 2001

CTR10909J: Viscoelastic Modeling of Press-Fitted Composite Cylinders - 01 January 2001

CTR10910J: Effects of Resin Consolidation on the Durability of IM7/PETI-5 Composites - 01 January 2001

CTR10911J: Single-Fiber Fragmentations of AS-4 Carbon Fiber Embedded in Epon 828 Under the Effect of Elevated Temperatures - 01 January 2001

CTR10907J: A Damage Evolution Model for Viscoelastic Composite Laminates - 01 January 2001

CTR10912J: Effect of Environment on Fracture Toughness and Debond Growth of Aluminum/FM®73/Boron-Epoxy Adhesively Bonded Joints - 01 January 2001

JTE12134J: Experimental Evaluation of the Dynamic Shear Strength of Adhesive-Bonded Lap Joints - 01 November 2000

CTR10620J: Stress Transfer in the Fiber/Matrix Interface of Titanium Matrix Composites Due to Thermal Mismatch and Reaction Layer Development - 01 October 2000

CTR10621J: Failure Initiation in Translaminar Reinforced Composites - 01 October 2000

CTR10622J: Bolt Bearing Behavior of Highly Loaded Polymer Matrix Composite Joints at Elevated Temperatures With and Without Clamp-Up - 01 October 2000

CTR10619J: High Strain Rate Characterization of a Glass/Epoxy Composite - 01 October 2000

CTR10623J: Effect of High-Frequency Low-Amplitude Impact Loads on Polymeric Composites - 01 October 2000

CTR10624J: Some Results from X-Ray Computed Tomography Applied to Metal Matrix Composites - 01 October 2000

CTR10538J: Preamble to the Collection of Papers Based on Presentations Given at the Symposium on Durability of Composites, Dedicated in Honor of Professor Kenneth L. Reifsnider of Virginia Tech - 01 October 2000

CTR10539J: The Durability of Fiber Composites—The Case for Mechanism-Based Models - 01 October 2000

CTR10540J: Residual Strength-Based Life Predictions of Composite Materials Under Combined Damage Mechanisms - 01 October 2000

CTR10541J: A Simple Discrete-Tow Model for Analysis of Textile Composites - 01 October 2000

CTR10542J: Fatigue Behavior of Glass-Reinforced Epoxy Resin Submitted to Hot-Wet Aging - 01 October 2000

CTR10543J: Tensile Behavior of Filament-Wound Composites in Medium Vacuum - 01 October 2000

CTR10544J: Fiber-Reinforced Composite and Wood Bonded Interfaces: Part 1. Durability and Shear Strength - 01 October 2000

CTR10545J: Fiber-Reinforced Composite and Wood Bonded Interfaces: Part 2. Fracture - 01 October 2000

CTR10546J: A Life Prediction Methodology for Thick Section Composites Used in Civil Infrastructure - 01 October 2000

JTE12100J: In Situ Measurement of Fatigue Crack Growth Rates in a Silicon Carbide Ceramic at Elevated Temperatures Using a DC Potential System - 01 July 2000

JTE12109J: Diagnostic Scores for Interlaboratory Study Data - 01 July 2000

CTR10632J: Cylindrical Indentation of Orthotropic Laminates on Elastic Foundations - 01 July 2000

CTR10633J: A New Compression Test Fixture for Unnotched or Notched Thin Composite Laminates - 01 July 2000

CTR10634J: Mechanism-Based Modeling of Long-Term Degradation - 01 July 2000

CTR10635J: Scaling of First-Ply Failure and Strength in [+ϑn/−ϑ/−ϑn/90/902n]s Laminates: Experiments and Predictions - 01 July 2000

CTR10636J: Evaluation of Four Composite Shear Test Methods by Digital Speckle Strain Mapping and Fractographic Analysis - 01 July 2000

JTE12092J: Dynamic Shear Modulus and Damping in Iron-Copper and Steel-Based Metal Matrix Composites - 01 May 2000

JTE12094J: A New Assessment Method for the Bulk Modulus and the Poisson's Ratio of Porous Ceramics - 01 May 2000

JTE12097J: Characterization of Mechanical Properties in Surface-Treated Materials - 01 May 2000

JTE12098J: A New Technique for Measurement of the Strength of Ceramic Shells in the Precision Casting Process - 01 May 2000

CTR10626J: Evaluation of the Effect of a Custom Fiber Surface Treatment on the Adhesion Level in a Polymer-Based Composite Using the Single Fiber Fragmentation Test - 01 April 2000

CTR10627J: A Two Dimensional Rule-of-Mixtures Micromechanics Model for Woven Fabric Composites - 01 April 2000

CTR10628J: Lightning Strike of Perforated Carbon Fiber Epoxy Laminar Flow Panels - 01 April 2000

CTR10629J: Dynamic Elastic Modulus and Vibrational Damping in Nicalon SiCxOy Fiber/Borosilicate Glass Composites: Effects of Thermal Cycling - 01 April 2000

CTR10630J: Assessment of Residual Composite Properties as Influenced by Thermal Mechanical Aging - 01 April 2000

CTR10631J: Numerically Based Compliance Calibration for Steel Frame Assisted Tension Specimen - 01 April 2000

JTE12080J: The Effect of Load and Crack Misalignment on Stress Intensity Factors for Bend-Type Fracture Toughness Specimens - 01 March 2000

JTE12087J: Modification of ASTM F 1671-97a, Resistance of Materials to Penetration by Blood-Borne Pathogens, for Use with Elastomeric Materials - 01 March 2000

JTE12069J: Experimental and Numerical Study of Delamination Growth Induced by a Transverse Crack in Unidirectional Laminates Subjected to Bending Loads - 01 January 2000

JTE12071J: Measurement of Young's Moduli for Lead Zirconate Titanate (PZT) Ceramics - 01 January 2000

CTR10982J: Modeling of Thermal Stresses in Yttrium Aluminum Garnet and Alumina Fibers Coated with β″-Alumina - 01 October 1999

CTR10983J: Analysis of Mechanical Yield Behavior and Constitutive Response of MMC - 01 October 1999

CTR10984J: The Wyoming-Modified Two-Rail Shear Test Fixture for Composite Materials - 01 October 1999

CTR10985J: Comparison of the Low and High Velocity Impact Response of Kevlar Fiber-Reinforced Epoxy Composites - 01 October 1999

CTR11029J: Composites Contents - 01 October 1999

JTE12226J: Evaluating the Quality of a Mechanical Testing System Using Displacement Field Contours - 01 July 1999

CTR10612J: Durability of Graphite-Fiber-Reinforced PMR-15 Composites Aged at Elevated Temperatures - 01 July 1999

CTR10613J: Thermal Residual Stress Analyses of Nextel 440/Aluminum Composite - 01 July 1999

CTR10614J: Thermal Image Analysis for the In-Situ NDE of Composites - 01 July 1999

CTR10615J: Fatigue Crack Coalescence in Discontinuously Reinforced Metal Matrix Composites: Implications for Reliability Prediction - 01 July 1999

CTR10616J: Behavior of 3-D Orthogonally Woven Composites Under Tensile Loading - 01 July 1999

CTR10617J: Preliminary Mechanical Property Assessment of an Ultra SCS®/Ti-22A1-23Nb Composite - 01 July 1999

CTR10618J: Aging Analyses of Polymer Composites Through Time-Temperature Equivalence - 01 July 1999

CTR10947J: Compression After Impact Testing of Carbon Fiber Reinforced Plastic Laminates - 01 April 1999

CTR10948J: Compressive Strength of Hybrid Composite Tubes After Low-Energy Impact - 01 April 1999

CTR10949J: Damage Modeling of a Transversely Loaded Titanium Matrix Composite Under Cyclic Conditions - 01 April 1999

CTR10950J: Low-Velocity Impact Response of Cross-Ply Laminated Sandwich Composites with Hollow and Foam-Filled Z-Pin Reinforced Core - 01 April 1999

CTR10951J: Measured Through-the-Thickness Thermal Diffusivity of Carbon Fiber Reinforced Composite Materials - 01 April 1999

JTE12057J: A Back-Faced Strain Compliance Expression for the Compact Tension Specimen - 01 March 1999

JTE12058J: Data Supporting a Provisional American Society for Testing and Materials (ASTM) Method for Metalworking Fluids, Part I: A Solvent Blend with Wide-Ranging Ability to Dissolve Metalworking Fluids - 01 March 1999

JTE12038J: Loss Energy of Composite Materials. Part II: Impact Loading - 01 January 1999

CTR10608J: Residual Strength Degradation of Cross-Ply Titanium Matrix Composite Due to Elevated Temperature - 01 January 1999

CTR10609J: Optimal Design of Laminates for Maximum Buckling Resistance and Minimum Weight - 01 January 1999

CTR10610J: Comparison of Static Properties of 2-D and 3-D Woven Fabric Reinforced Composites - 01 January 1999

CTR10611J: Assessment of Evaluation Methods for the Mixed-Mode Bending Test - 01 January 1999

CTR10607J: Translaminar Reinforced Composites: A Review - 01 January 1999

CCA10418J: Effects of Superplasticizer, Retarding Agent, and Silica Fume on the Air Permeability of High-Performance Concrete - 01 December 1998

CTR10239J: Effect of Fiber Fracture and Matrix Yielding on Load Sharing in Continuous Fiber Metal Matrix Composites - 01 October 1998

CTR10240J: Net-Shape Machining and the Process-Dependent Failure of Fiber-Reinforced Plastics Under Static Loads - 01 October 1998

CTR10241J: Tension-Torsion Behavior of Glass Epoxy Flexbeam Laminates - 01 October 1998

JTE12028J: Dissipated Energy of Composite Materials—Part I: Cyclic Dynamic Stress - 01 September 1998

JTE12011J: The Applicability of ASTM Standard Test Specimens to Fracture and Fatigue Crack Growth of Discontinuous-Fiber Composites - 01 July 1998

JTE12020J: Results from a Round Robin on a Standard Method for Measurement of Fracture Toughness - 01 July 1998

JTE12015J: Adhesively Bonded Strain Gages for Extended Use at 315°C on Polymers - 01 July 1998

CTR10848J: Residual Thermal Stresses in Metallic and Intermetallic Matrix Composites After Cooling from Processing Temperature - 01 July 1998

CTR10849J: Nonlinear Analyses of Homogeneous, Symmetrically Delaminated Single Leg Bending Specimens - 01 July 1998

CTR10850J: Fatigue Life Prediction of Titanium Matrix Composites Under Mission Spectrum Loading - 01 July 1998

CTR10851J: Fracture Load Predictions for Adhesive Joints Under Mixed Mode I-II-III Loading - 01 July 1998

JTE11996J: A Method of Fatigue Testing of Concrete Highway Joint Sealants in Shear - 01 May 1998

CTR10050J: Inclined Double Notch Shear Test for Improved Interlaminar Shear Strength Measurements - 01 April 1998

CTR10051J: A Finite Element and Experimental Evaluation of Boron-Epoxy Doublers Bonded to an Aluminum Substrate - 01 April 1998

CTR10052J: Strength Reduction and Damage Characterization of SCS6/Ti-6Al-4V Composite Exposed to Fatigue at Elevated Temperature - 01 April 1998

CTR10053J: Mixed Mode I, II, and III Fracture Characterization of Adhesive Joints - 01 April 1998

CTR10054J: Micellaneous Information - 01 April 1998

CTR10048J: Micromechanics Analysis and Life Prediction of Titanium Matrix Composites - 01 April 1998

CTR10049J: Dependence of Intralaminar Fracture Toughness on Direction of Crack Propagation in Unidirectional Composites - 01 April 1998

JTE11985J: Evaluation of Modified Weibull Distribution for Describing the Strength of Ceramic Fibers and Whiskers with Varying Diameters - 01 March 1998

JTE11986J: Impact Force Comparison of Polymers: Molded-Notch Versus Cut-Notch Using the ASTM D 256 Izod Impact Test Method - 01 March 1998

JTE11987J: A Method of Finding the Effective Length of the Specimen Used in the Hot Torsion Test and Recommendations on Geometry of the Test Specimen - 01 March 1998

CTR10495J: Sensitivity of Mechanical Properties to Braid Misalignment in Triaxial Braid Composite Panels - 01 January 1998

CTR10496J: Effect of Interfacial Properties on the Fiber Fragmentation Process in Polymer Matrix Composites - 01 January 1998

CTR10497J: Introduction to Symposium on Non-Aerospace Applications for Composite Materials - 01 January 1998

CTR10498J: Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams - 01 January 1998

CTR10499J: Accelerated Test Methods to Determine the Long-Term Behavior of Composite Highway Structures Subject to Environmental Loading - 01 January 1998

CTR10494J: An Investigation into the Fatigue of a Hybrid Titanium Composite Laminate - 01 January 1998

CTR10500J: Viscoelastic Creep Characteristics of Neat Thermosets and Thermosets Reinforced with E-Glass - 01 January 1998

CTR10501J: The Effect of Biofouling on Graphite/Epoxy Composites - 01 January 1998

JTE11498J: Local Versus Global Strain Measurement of a Polymeric Geogrid - 01 November 1997

CTR10118J: Using Measured Damage Parameters to Predict the Residual Strength of Impacted Composites: A Neural Network Approach - 01 October 1997

CTR10120J: Effects of Environmental Exposure on Fiber-Reinforced Plastic (FRP) Materials Used in Construction - 01 October 1997

CTR10121J: Seawater Effects on Strength and Durability of Glass/Epoxy Filament-Wound Tubes as Revealed by Acoustic Emission Analysis - 01 October 1997

CTR10122J: QUIKTEMP—A New Short-Cycle-Time Manufacturing Method for Thermoplastic Composites Made from Low-Cost Textile Preforms - 01 October 1997

CTR10123J: Composite Repair of a Stainless Steel-GRP Sonar Dome - 01 October 1997

JTE11357J: Instantaneous Coefficient of Linear Thermal Expansion—A New Definition - 01 September 1997

JTE11359J: Effect of Specimen Thickness on the Long-Life Fatigue Performance of a Randomly-Oriented Continuous-Strand Glass-Mat-Reinforced Polypropylene Composite - 01 September 1997

JTE11365J: Hoechst Celanese Improves Consistency of Cellulose Acetate Through Automated Viscosity Measurement - 01 September 1997

JTE11874J: Characterization of Styrene-Butadiene-Styrene Polymer Modified Bitumens—Comparison of Conventional Methods and Dynamic Mechanical Analyses - 01 July 1997

JTE11875J: Measurement of the Fracture Energy of Interfaces in Composites Through Sandwich-Type Chevron-Notched Specimens - 01 July 1997

JTE11877J: Shear Lap-Joint Testing with Rubber Substrate - 01 July 1997

JTE11883J: Effective Vulnerability Assessment of Tamper-Indicating Seals - 01 July 1997

CTR10023J: The Wyoming Combined Loading Compression (CLC) Test Method - 01 July 1997

CTR10024J: Effect of Time-Dependent Matrix Behavior on the Evolution of Processing-Induced Residual Stresses in Metal Matrix Composites - 01 July 1997

CTR10025J: Matrix Cracking of High-Performance Composite Laminates with Variation of Laminate Stacking Sequence and Testing Temperature - 01 July 1997

CTR10026J: Strain Gage Selection Criteria for Textile Composite Materials - 01 July 1997

CTR10027J: The Effect of Voids on the Elastic Properties of Textile Reinforced Composites - 01 July 1997

CTR10028J: Evaluation of the Edge Crack Torsion (ECT) Test for Mode III Interlaminar Fracture Toughness of Laminated Composites - 01 July 1997

CTR10029J: Hoop Tensile Strength and Fracture Behavior of Continuous Fiber Ceramic Composite (CFCC) Tubes from Ambient to Elevated Temperatures - 01 July 1997

JTE11347J: Computerized Chemical Structural Information (CSI) and Associated Data: A Study of Computerized CSI Pathways Used by Synthesis Chemists, and Recommendations for Guidelines - 01 May 1997

JTE11349J: Material Specifications of Advanced Ceramics and Other Issues in the Use of Property Databases with Corrosion Analysis Models - 01 May 1997

JTE11350J: Effect of Preloading on the Strength of Soda-Lime Glass - 01 May 1997

CTR10015J: Fatigue Behavior of a Cross-Ply Titanium Matrix Composite with Tensile and Zero Mean Load at Elevated Temperature - 01 April 1997

CTR10016J: Progressive Fracture of Composite Cylindrical Shells Subjected to External Pressure - 01 April 1997

CTR10017J: Machining of Filled Polymers Using Single-Edge Tools - 01 April 1997

CTR10018J: (±45) Degree Off-Axis Tension Test for Shear Characterization of Plain Weave Fabric Composites - 01 April 1997

CTR10019J: Improvement of Strength and Ductility of Adhesively Bonded Joints by Inclusion of SiC Whiskers - 01 April 1997

CTR10020J: Damage Tolerance in Advanced Composites - 01 April 1997

JTE11475J: Experimental Assessment of Four Composite Material Shear Test Methods - 01 March 1997

JTE11472J: Repeatability and Reproducibility for Pass/Fail Data - 01 March 1997

JTE11474J: Effect of Construction Adhesive and Joist Variability on the Deflection Behavior of Light-Frame Wood Floors - 01 March 1997

JTE11483J: Needs and Applications in Precision Measurement and Monitoring of Wear - 01 March 1997

JTE11320J: Analysis of Plowing and Adhesive Effects in the Rolling Ball Tack Method for Pressure Sensitive Adhesives - 01 January 1997

JTE11333J: The Use of the Tortus and the Pendulum with the 4S Rubber for the Assessment of Slip Resistance in the Laboratory and the Field - 01 January 1997

JTE11334J: Kinematic Methods for Quantifying Loss of Balance While Negotiating a Curved Path on a Slippery Surface - 01 January 1997

CTR10009J: Quantitative Assessment of Fiber Fracture in Damaged Laminates Using X-Ray Radiography - 01 January 1997

CTR10010J: Delamination Characterization of Woven Glass/Polyester Composites - 01 January 1997

CTR10011J: Modeling of Matrix Failure in Ceramic Matrix Composites - 01 January 1997

CTR10008J: A Progressive Damage Model and Analysis Methodology for Predicting the Residual Strength of Composite Laminates - 01 January 1997

CTR10012J: The Recent Development of an Ultrasonic Nondestructive Evaluation Technique for Metal Matrix Composites - 01 January 1997

CCA10159J: Durability of Reinforced Lightweight Mortars with Corrosion Inhibitors - 01 December 1996

CTR10109J: Unidirectional Composite Compression Strengths Obtained by Testing Cross-Ply Laminates - 01 October 1996

CTR10110J: Improvement of the Interfacial Adhesion Between Kevlar Fiber and Resin by Using R-F Plasma - 01 October 1996

CTR10111J: Rotordynamic Experiments on Composite Shafts - 01 October 1996

CTR10112J: Incorporating Fiber Damage in a Micromechanical Analysis of Metal Matrix Composite Laminates - 01 October 1996

CTR10113J: Compression Strength of Composite Sandwich Structures After Barely Visible Impact Damage - 01 October 1996

JTE11314J: Book Reviews - 01 September 1996

JTE11304J: Preliminary Characterization of Thermal Diffusivity for Carbon-Carbon Composites Through Pulsed Video Thermal Imaging - 01 September 1996

JTE11445J: Development of Analytical Methods for Quantification of Residual Powder on ‘Powderless’ Latex Gloves - 01 July 1996

JTE11446J: The Effect of Fiber Coating on the Temperature Dependence of the Elastic and Anelastic Properties of a Fiber-Reinforced Borosilicate Glass Matrix Composite - 01 July 1996

CTR10528J: A Simplified Approach for Modeling Fatigue of Unidirectional Ceramic Matrix Composites - 01 July 1996

CTR10529J: Effect of Loading Frequency and Interleaf on the Delamination Characteristics of Laminated Composites - 01 July 1996

CTR10530J: An Experimental Investigation of the Failure Modes in Hybrid Ceramic Matrix Composites - 01 July 1996

CTR10531J: Tensile Fatigue Behavior of a Coated Two-Dimensional Carbon-Carbon Composite Laminate - 01 July 1996

CTR10533J: An Effective Stress Parameter for Long-Term Fatigue Strength of Fiber-Reinforced Plastic Pipes - 01 July 1996

CTR10534J: Equivalent Thermal Conductivity of Two- and Three-Dimensional Orthogonally Fiber-Reinforced Composites in One-Dimensional Heat Flow - 01 July 1996

CTR10535J: Concise Encyclopedia of Composite Materials Revised Edition - 01 July 1996

CCA10306J: Selectivity of Alkaline Activators for the Activation of Slags - 01 June 1996

CTR10521J: Damage Tolerance Predictions for Stiffened Composite Panels—Part II: Application of a Failure Criteria - 01 April 1996

CTR10522J: Low Velocity Impact Damage in Filament-Wound Composite Pressure Bottles - 01 April 1996

CTR10523J: Hydrodynamic Machining of Fiber-Reinforced Composites - 01 April 1996

CTR10524J: Effect of Cooling Rate and Stacking Sequence on the Fatigue Behavior of Notched Quasi-Isotropic AS4/PEEK Laminates - 01 April 1996

CTR10525J: An Exact Method for Dynamic Analysis of Rectangular Laminated Orthotropic Plates Under Heating Load - 01 April 1996

CTR10517J: Thermal Residual Stresses in the Analysis of Fiber-Bridged Matrix Crack Growth in Titanium Matrix Composites - 01 April 1996

CTR10519J: Hot Pressing of Plasma-Sprayed SiC Fiber-Reinforced Ti-6Al-4V Alloy - 01 April 1996

CTR10520J: Simplified Data Reduction Methods for the ECT Test for Mode III Interlaminar Fracture Toughness - 01 April 1996

JTE12688J: Introduction to Engineering Materials: Behavior, Properties, and Selection - 01 March 1996

JTE12689J: Successful Management of the Analytical Laboratory - 01 March 1996

JTE12684J: Performance of Zirconium and Zirconium Alloys in Organics - 01 March 1996

JTE11282J: Robust Design of the Iosipescu Shear Test Specimen for Composites - 01 January 1996

CTR10461J: Transverse Fatigue Response of a Metal Matrix Composite Under Strain-Controlled Mode at Elevated Temperature: Part I—Experiments - 01 January 1996

CTR10462J: Transverse Fatigue Response of a Metal Matrix Composite Under Strain-Controlled Mode at Elevated Temperature: Part II—Analysis - 01 January 1996

CTR10463J: Fracture and Fatigue Crack Growth Behavior of SiCW/2124A1 Composite - 01 January 1996

CTR10464J: Strength and Damage Mechanisms of Notched Two-Dimensional Triaxial Braided Textile Composites and Tape Equivalents Under Tension - 01 January 1996

CTR10460J: Surface Inspection of Textile Composite Materials Using Image Analysis Techniques - 01 January 1996

CTR10465J: Damage Tolerance Predictions for Stiffened Composite Panels: Part I—Strain Field Predictions - 01 January 1996

CCA10146J: Properties of a Non-Film Forming Latex in Ceramic Tile Mortar - 01 December 1995

CCA10148J: Comparison of Liquid Dispersions with Spray-Dried Acrylic Polymers as Modifiers of a Cement-Based Patching Material - 01 December 1995

JTE11435J: Fatigue Strength of Adhesive Bonded Aluminum Joints - 01 November 1995

CTR10448J: Properties and Analysis of Composites Reinforced with E-Glass Weft-Knitted Fabrics - 01 October 1995

CTR10449J: Tensile Strength of Unidirectional Composites: The Role of Efficiency and Strength of Fiber-Matrix Interface - 01 October 1995

CTR10450J: Electrodeposited Cobalt-Tungsten as a Diffusion Barrier Between Graphite Fibers and Nickel - 01 October 1995

CTR10451J: Wrinkling of Composite Sandwich Structures Under Compression - 01 October 1995

CTR10452J: Mixed Mode II-Mode III Fracture of Adhesive Joints - 01 October 1995

CTR10453J: Pressurized Ring Test for Composite Pressure Vessel Hoop Strength and Stiffness Evaluation - 01 October 1995

CTR10454J: Experimental Study of Three- and Four-Point Shear Test Specimens - 01 October 1995

JTE11409J: Material Specifications of Advanced Ceramics in Corrosion Studies - 01 September 1995

JTE11404J: Development of a Dynamic Load-Deflection Apparatus for Elastomeric Materials - 01 September 1995

JTE11406J: Structure and Outliers in Interlaboratory Studies - 01 September 1995

JTE11407J: Development of a New Accelerated Adhesion Test for Silicone Sealants - 01 September 1995

JTE11411J: Book Reviews - 01 September 1995

JTE10423J: Strength Testing of Brittle Materials in Tubular Form Using Elastomeric Inserts - 01 July 1995

JTE10427J: Analysis of the Coherence of Published Data on Aluminum Matrix Composites - 01 July 1995

JTE10432J: Microcracks: The Hazard Function and Reliability Inspection - 01 July 1995

JTE10421J: Analysis of the Peel Test: Prediction of Adherend Plastic Dissipation and Extraction of Fracture Energy in Metal-to-Metal Adhesive Joints - 01 July 1995

JTE10434J: Book Reviews - 01 July 1995

CTR10481J: Review of the Mechanics of Embedded Optical Sensors - 01 July 1995

CTR10482J: Study of the Residual Stress in Cold-Rolled 7075 Al-SiC Whisker-Reinforced Composites by X-Ray and Neutron Diffraction - 01 July 1995

CTR10483J: Shear Testing of Textile Composite Materials - 01 July 1995

CTR10484J: Fatigue-Life Behavior and Matrix Fatigue Crack Spacing in Unnotched SCS-6/Timetal®21S Metal Matrix Composites - 01 July 1995

CTR10485J: Compressive Failure of Laminated and Woven Composites - 01 July 1995

CTR10486J: Damage Characterization of a Cross-Ply SiC/CAS-II Ceramic Composite Under Fatigue Loading Using a Real-Time Acousto-Ultrasonic NDE Technique - 01 July 1995

CTR10487J: The Effect of High-Temperature Degradation on the Mode I Critical Strain Energy Release Rate of a Graphite/Epoxy Composite - 01 July 1995

CTR10488J: Introduction to Symposium on Bolted and Bonded Joints in Composite Materials - 01 July 1995

CTR10489J: Failure Criterion for Thick Multifastener Graphite-Epoxy Composite Joints - 01 July 1995

CTR10490J: Effects of Stacking Sequences on Mechanically Fastened Joint Strength in Quasi-Isotropic Carbon-Epoxy Laminates - 01 July 1995

CTR10491J: Characterization of Bolted Joint Behavior: MIL-HDBK-17 Accomplishments at Standardization - 01 July 1995

JTE10411J: Relationships between Tensile Stress Relaxation Behavior and Short-Term Elastic Recovery for Linear Low-Density Polyethylenes - 01 May 1995

JTE10415J: Torsional Fatigue Test for Adhesive Bonded Butt Joints - 01 May 1995

JTE10418J: Book Review - 01 May 1995

JTE10410J: Influence of Embedded Markers on the Response of the Host Material - 01 May 1995

JTE10412J: A New Technique for Fracture Characterization of Ceramics at Room and at High Temperature - 01 May 1995

CTR10473J: Environmental Effects on Mechanical Properties of Thick Composite Structural Elements - 01 April 1995

CTR10474J: Introduction to Symposium on Bolted and Bonded Joints in Composite Materials - 01 April 1995

CTR10475J: Testing Composite-to-Metal Tubular Lap Joints - 01 April 1995

CTR10476J: Biaxial Bearing/Bypass Testing of Graphite/Epoxy Plates - 01 April 1995

CTR10477J: A Novel Joining Method for Smooth-Bore Composite Pressure Hulls - 01 April 1995

CTR10478J: Fastener Hole Reinforcement in Composites Using Cold-Expanded Inserts - 01 April 1995

CTR10469J: Effect of Specimen Tab Configuration on Compression Testing of Composite Materials - 01 April 1995

CTR10470J: Size and Geometry Effects in Transverse Flexural Testing of Unidirectional Graphite/Thermoplastic - 01 April 1995

CTR10471J: Modes of Failure of Fibrous Composite Materials as Affected by the Orientation-Angle of Fiber - 01 April 1995

CTR10472J: Effects of Short-Term Environmental Exposure on Axial Strengthening Capacity of Composite Jacketed Concrete - 01 April 1995

JTE10897J: Development of a Novel Specimen Geometry for Fatigue Testing of Fine Wire - 01 March 1995

JTE10908J: Book Review - 01 March 1995

JTE10903J: TOFSIMS Studies of Cleaning Procedures and Silane Surface Treatments of Steels - 01 March 1995

JTE10395J: Indentation Characterization of Silicon Nitride - 01 January 1995

CTR10509J: Effect of Temperature and Moisture on the Impact Behavior of Graphite/Epoxy Composites: Part II—Impact Damage - 01 January 1995

CTR10510J: A Statistical Analysis of Bushing, Sleeve, and Oversize Hole Effects on the Bolted Joint Strength of Graphite/Epoxy Laminates - 01 January 1995

CTR10511J: Time-Dependent Behavior of a Graphite/Thermoplastic Composite and the Effects of Stress and Physical Aging - 01 January 1995

CTR10508J: Effect of Temperature and Moisture on the Impact Behavior of Graphite/Epoxy Composites: Part I—Impact Energy Absorption - 01 January 1995

CTR10512J: Residual Stresses in SCS-6/Beta-21S Composites - 01 January 1995

CTR10513J: An Improved Iosipescu Shear Test Fixture - 01 January 1995

CTR10514J: Thermal Conductivity of Textile Composites with Arbitrary Preform Structures - 01 January 1995

JTE11863J: Temperature Dependence of Dynamic Young's Modulus and Mechanical Damping in a Nextel Fiber-Reinforced Glass Composite - 01 November 1994

CTR10589J: Classical Laminate Theory Models for Woven Fabric Composites - 01 October 1994

CTR10590J: Longitudinal Fatigue Response of a Metal Matrix Composite Under Strain Controlled Mode at Elevated Temperature - 01 October 1994

CTR10591J: Time-Dependent Behavior of Continuous-Fiber-Reinforced Metal Matrix Composites: Modeling and Applications - 01 October 1994

CTR10592J: An Advanced Test Technique to Quantify Thermomechanical Fatigue Damage Accumulation in Composite Materials - 01 October 1994

CTR10593J: Effect of Through Thickness Tensile and Compressive Stresses on Delamination Propagation Fracture Energy - 01 October 1994

CTR10594J: A Biaxial Tension-Compression Test Method for Composite Laminates - 01 October 1994

CTR10595J: Elevated Temperature Fatigue Behavior of Tungsten Fiber Reinforced Superalloy Composites - 01 October 1994

CTR10596J: Book Review - 01 October 1994

JTE12658J: The Influence of Testing Methodology on the Fatigue Crack Propagation Behavior of Cellulose Esters - 01 September 1994

JTE12660J: Data Analysis Techniques for Impact Tests of Composite Materials - 01 September 1994

JTE12657J: Fatigue Testing of High-density Polyethylene and Polycarbonate with Crack Length Measurement Using Image Processing Techniques - 01 September 1994

JTE12668J: Wear Analysis of Björk Shiley Delrin Tilting Disc Heart Valves - 01 September 1994

JTE11842J: Numerical Assessment of the Dynamic Tension Test Using the Split Hopkinson Bar - 01 July 1994

JTE11845J: The Influence of Test Piece Preparation on the Compressive Strength of Unidirectional Fiber-Reinforced Plastic - 01 July 1994

JTE11847J: An Excitation System for Dynamic Testing of Large Structures - 01 July 1994

JTE11843J: Radial Basis Function Network Learns Ceramic Processing and Predicts Related Strength and Density - 01 July 1994

CTR10409J: Fracture Behavior of a Fiber-Reinforced Titanium Matrix Composite with Open and Filled Holes at Room and Elevated Temperatures - 01 July 1994

CTR10410J: Effect of Laminate Orientation on the Thermomechanical Fatigue Behavior of a Titanium Matrix Composite - 01 July 1994

CTR10411J: Unidirectional Tensile Stress-Strain Response of BP-SiC Fiber Reinforced Ti-6Al-4V - 01 July 1994

CTR10412J: Mixed Mode Energy Release Rates for Adhesively Bonded Beam Specimens - 01 July 1994

CTR10413J: Residual Strength of Impacted Composites: Analysis and Tests - 01 July 1994

CTR10414J: Measurement of Interfacial Properties for Aluminum and Titanium Matrix Alloy Composites Manufactured by Vacuum Plasma Spray - 01 July 1994

CTR10415J: Effect of Notch on Failure of Two-Dimensional ±45° Triaxial Braided Textile Composite Materials - 01 July 1994

CTR10416J: The Effects of an Expanding Monomer on the Tensile Properties of Graphite/Epoxy - 01 July 1994

CTR10418J: Book Review - 01 July 1994

GTJ10088J: Cyclic Undrained Behavior and Liquefaction Potential of Sand Treated with Chemical Grouts and Microfine Cement (MC-500) - 01 June 1994

JTE11817J: Temperature Dependencies of Elasticity Characteristics for Tellurium-Alloyed Gallium Arsenide - 01 May 1994

JTE11833J: Book Reviews - 01 May 1994

CTR10400J: Development of Strength Theories for Random Fiber Composites - 01 April 1994

CTR10401J: The Micromechanics of Ambient Temperature Cyclic Fatigue Loading in a Composite of CAS Glass Ceramic Reinforced with Nicalon Fibers - 01 April 1994

CTR10402J: Prediction of Fatigue Life of Composite Femoral Prostheses Using Acoustic Emission Technique - 01 April 1994

CTR10403J: A New Failure Criterion for Nonlinear Composite Materials - 01 April 1994

CTR10404J: An Analytical and Experimental Evaluation of 0/90 Laminate Tests for Compression Characterization - 01 April 1994

CTR10405J: Effect of Fiber-Fiber Interaction on the Strength Properties of Short Fiber Reinforced Cements - 01 April 1994

CTR10406J: A Field Deployable Nondestructive Impact Damage Assessment Methodology for Composite Structures - 01 April 1994

JTE12642J: Development of an Improved Compression Specimen Geometry for Unreinforced Polymers - 01 March 1994

JTE12644J: Back-Face Strain Compliance and Electrical-Potential Crack Length Calibrations for the Disk-Shaped Compact-Tension DC(T) Specimen - 01 March 1994

JTE12645J: Application of Surface Fabrication to Strain Measurement in Nanometer Scale with the Scanning Tunneling Microscope - 01 March 1994

JTE12647J: Local Strain in Corrugated Pipe: Experimental Measurements to Test a Numerical Model - 01 March 1994

JTE12650J: Testing Techniques for Measurement of Bulk Modulus - 01 March 1994

JTE12649J: Thermal and Mechanical Properties of Cellular Polystyrene and Polyurethane Insulation Materials Aged on a Flat Roof in Hot-Dry Climate - 01 March 1994

JTE12627J: Controlling, Data Acquisition, and Data Processing for Axial and Shear Creep Tests Using a Computer - 01 January 1994

JTE12634J: Data Acquisition and Analysis of Tensile Properties for Metal Matrix Composites - 01 January 1994

CTR10391J: The Interphase in Unidirectional Fiber-Reinforced Epoxies: Effect on Local Stress Fields - 01 January 1994

CTR10392J: A Self-Consistent Fabric Geometry Model: Modification and Application of a Fabric Geometry Model to Predict the Elastic Properties of Textile Composites - 01 January 1994

CTR10393J: Micromechanical Modeling of Process-Induced Residual Stresses in Ti-24Al-11Nb/SCS-6 Composite - 01 January 1994

CTR10390J: Failure Behavior of Plain Weave Fabric Laminates Under In-Plane Shear Loading - 01 January 1994

CTR10394J: Residual Stresses in SCS-6/Ti-24Al-11Nb Composite: Part I—Experimental - 01 January 1994

CTR10395J: Residual Stresses in SCS-6/Ti-24Al-11Nb Composite: Part II—Finite Element Modeling - 01 January 1994

CTR10396J: Response of Metal Matrix Laminates with Temperature-Dependent Properties - 01 January 1994

CTR10397J: Thermo-Elastic Properties of Composite Laminates with Transverse Cracks - 01 January 1994

CTR10379J: Round Robin Testing for Mode I Interlaminar Fracture Toughness of Composite Materials - 01 December 1993

CTR10380J: The Use of Impact Force as a Scale Parameter for the Impact Response of Composite Laminates - 01 December 1993

CTR10381J: Cure Shrinkage Induced Warpage in Flat Uni-Axial Composites - 01 December 1993

CTR10382J: Stress-Strain Analysis of a [0/90]2s Titanium Matrix Laminate Subjected to a Generic Hypersonic Flight Profile - 01 December 1993

CTR10383J: Thermal Residual Stresses in a Silicon-Carbide/Titanium [0/90] Laminate - 01 December 1993

CTR10384J: Compressive Resistance of Unidirectional GFRP Under High Rate of Loading - 01 December 1993

JTE11795J: Laboratory Testing Procedure for Evaluation of Moving Bed Catalyst Attribution - 01 November 1993

JTE11798J: Formulation and Application Technologies for Microbial Pesticides: Review of Progress and Future Trends - 01 November 1993

JTE11803J: The Use of Robotics to Eliminate Testing Variability in the Evaluation of Polymeric Matrix Composites Subjected to Three-Point Flexure - 01 November 1993

JTE11805J: Book Reviews - 01 November 1993

JTE11779J: Some Microstructural Conditions for Evaluating Fracture Toughness and R-Curve Behavior in Platelet-Reinforced Composites - 01 September 1993

JTE11780J: Mean Stress Diagrams for Composites Generated Using a Modified Up-and-Down Test Methodology: Part I—Extensive Preliminary Data - 01 September 1993

JTE11781J: Mean Stress Diagrams for Composites Generated Using a Modified Up-and-Down Test Methodology: Part II—Limited Preliminary Data - 01 September 1993

JTE11782J: Characterization of Defects in Graphite Fiber Based Composite Structures Using the Acoustic Impact Technique (AIT) - 01 September 1993

JTE11785J: A Mechanical Extensometer for High-Temperature Tensile Testing of Ceramics - 01 September 1993

CTR10368J: Micromechanical Relations for Fiber-Reinforced Composites Using the Free Transverse Shear Approach - 01 September 1993

CTR10369J: An Edge Crack Torsion Method for Mode III Delamination Fracture Testing - 01 September 1993

CTR10370J: Buckling Analyses of Fiber-Composite Laminate Shells with Material Nonlinearity - 01 September 1993

CTR10372J: Fatigue Crack Spacing in the Matrix of a Continuous Fiber SCS-6/Ti Composite - 01 September 1993

CTR10373J: Fatigue Cracking of Fiber-Reinforced Titanium Matrix Composites - 01 September 1993

CTR10374J: Differences in Fatigue and Fracture Behavior of Woven-Mat and Acrylic Binder SCS-6/Ti-15-3 Composites - 01 September 1993

CTR10375J: Methodology for Prediction of Fiber Bridging Effects in Composites - 01 September 1993

CTR10376J: Application of Fiber Bridging Models to Fatigue Crack Growth in Unidirectional Titanium Matrix Composites - 01 September 1993

JTE11952J: Determining Paint Adhesion to Wood Using a Uniform Double-Cantilever Beam Technique - 01 July 1993

JTE11953J: A Novel Method for Imaging the Damage Pattern in Laminated Plastic Materials Subjected to Ballistic Impact - 01 July 1993

JTE11955J: Density Measurement of Cylindrical Specimens Within a Mold by Gamma-Rays - 01 July 1993

JTE11959J: Accurate and Precise Fabrication of Iosipescu Shear Test Specimens - 01 July 1993

JTE11956J: An Improved Moisture Permeability Measurement Method - 01 July 1993

CTR10361J: Indentation-Flexure and Low-Velocity Impact Damage in Graphite Epoxy Laminates - 01 June 1993

CTR10362J: Mechanical Properties of Triaxially Braided Composites: Experimental and Analytical Results - 01 June 1993

CTR10363J: Effect of Thermal Stresses on the Vibration of Composite Cantilevered Plates - 01 June 1993

CTR10364J: Modeling Damage in a Plain Weave Fabric-Reinforced Composite Material - 01 June 1993

CTR10365J: Ultrasonic Backscattering Using Digitized Full-Waveform Scanning Technique - 01 June 1993

CTR10358J: Three-Dimensional Finite Element Progressive Failure Analysis of Composite Laminates Under Axial Extension - 01 June 1993

CTR10359J: Analysis of Delamination in Cross-Ply Laminates Initiating from Impact Induced Matrix Cracking - 01 June 1993

CTR10360J: Analysis of Matrix Cracking and Local Delamination in (0/ϑ/ − ϑ)s Graphite Epoxy Laminates Under Tensile Load - 01 June 1993

JTE11766J: The Gel Electrode Revisited: Fatigue Crack Detection with a Polymer Film - 01 May 1993

JTE11769J: The Vibration-Flex Test Method to Determine the Susceptibility of Plastic Films to Pinhole Formation Due to Flexing - 01 May 1993

JTE11755J: Sensitivity of Water Leak Tests for Latex Condoms - 01 March 1993

JTE11760J: Book Reviews - 01 March 1993

CTR10349J: Elastic and Thermal Effects in the Interphase: Part II. Comments on Modeling Studies - 01 March 1993

CTR10350J: Elastic Analysis of Woven Fabric Laminates: Part I. Off-Axis Loading - 01 March 1993

CTR10351J: Elastic Analysis of Woven Fabric Laminates: Part II. Mixed Composites - 01 March 1993

CTR10352J: Instrumented Impact Testing at High Velocities - 01 March 1993

CTR10348J: Elastic and Thermal Effects in the Interphase: Part I. Comments on Characterization Methods - 01 March 1993

CTR10353J: The Influence of Stress Ratio and Temperature on the Fatigue Crack Growth Rate Behavior of ARALL® - 01 March 1993

CTR10354J: An Experimental Procedure for the Iosipescu Composite Specimen Tested in the Modified Wyoming Fixture - 01 March 1993

CTR10355J: Small Specimen Technique for Composites Testing - 01 March 1993

JTE11737J: Contoured Wood Double Cantilever Beam Specimen for Adhesive Joint Fracture Tests - 01 January 1993

JTE11744J: Performance of Hybrid Reinforcements in PVC Composites: Part I—Use of Surface-Modified Mica and Wood Pulp as Reinforcements - 01 January 1993

CTR10099J: Tensile Failure of Composites: Influence of Interface and Matrix Yielding - 01 December 1992

CTR10100J: The Effects of Uneven Fiber Spacing on Thermal Residual Stresses in a Unidirectional SCS-6/Ti-15-3 Laminate - 01 December 1992

CTR10101J: Prediction of Matrix Fatigue Crack Initiation in Notched SCS-6/Ti-15-3 Metal Matrix Composites - 01 December 1992

CTR10102J: A New Test Facility for Measuring the Coefficient of Moisture Expansion of Advanced Composite Materials - 01 December 1992

CTR10103J: Shear Failure and Impact Resistance in Graphite Fiber Laminates - 01 December 1992

CTR10104J: Finite Element Analysis of Beam Specimens Used to Measure the Delamination Resistance of Composites - 01 December 1992

CTR10106J: Book Review - 01 December 1992

CTR10091J: Mechanics for the Growth of Bridged Cracks in Composite Materials: Part I. Basic Principles - 01 September 1992

CTR10092J: Mechanics for the Growth of Bridged Cracks in Composite Materials: Part II. Applications - 01 September 1992

CTR10093J: Damage Tolerance of a Composite Sandwich with Interleaved Foam Core - 01 September 1992

CTR10094J: Effect of Expanding Monomer on Carbon Fiber-Reinforced Epoxy Composites - 01 September 1992

CTR10095J: Detection of Stress Fields and Delaminations in Vibrating Composite Beams by a Thermoelastic Technique - 01 September 1992

CTR10096J: Simplified Micromechanical Equations for Thermal Residual Stress Analysis of Coated Fiber Composites - 01 September 1992

JTE11721J: Fracture Testing Wood Adhesives with Composite Cantilever Beams - 01 July 1992

JTE11723J: High Temperature Tube Burst Test Apparatus - 01 July 1992

JTE11724J: An Evaluation of Strain Measuring Devices for Ceramic Composites - 01 July 1992

CTR10084J: Micromechanical Modelling of the Transverse Tensile Ductility of Unidirectional Silicon Carbide/6061 Aluminum - 01 June 1992

CTR10085J: A Robust Testing Method for Determination of the Damping Loss Factor of Composites - 01 June 1992

CTR10086J: Fracture Mechanics Analysis for Various Fiber/Matrix Interface Loadings - 01 June 1992

CTR10087J: Residual Thermal and Moisture Influences on the Analysis of Local Delaminations - 01 June 1992

CTR10088J: Shear Cracks in Foam Core Sandwich Panels: Nondestructive Testing and Damage Assessment - 01 June 1992

CTR10078J: Redesign of the Mixed-Mode Bending Delamination Test to Reduce Nonlinear Effects - 02 March 1992

CTR10079J: Consistent Shear Constitutive Relations for a Laminated Plate - 02 March 1992

CTR10080J: A Bimodular Material Model for Orthotropic Composite Thin Plates - 02 March 1992

CTR10081J: Static and Dynamic Mode II Strain Energy Release Rates in Toughened Thermosetting Composite Laminates - 02 March 1992

CTR10077J: Fiber-Matrix Interphase Effects upon Transverse Behavior in Metal-Matrix Composites - 02 March 1992

JTE11915J: Book Reviews - 01 March 1992

JTE11893J: Analysis of Gas-Fired Ceramic Radiant Tubes During Transient Heating: Part II—Thermoelastic Stress Analysis - 01 January 1992

JTE11897J: Experimental Evaluation of a Laboratory Twin-Probe Nuclear Gage for Specimen Density Measurement - 01 January 1992

JTE11894J: Hydrochlorofluorocarbon (HCFC) Blowing Agents for Foam Insulation of Launch Vehicle Cryogenic Propellant Tanks - 01 January 1992

JTE11902J: Shield Verification Testing at the Idaho Chemical Processing Plant — Fuel Processing Facility - 01 January 1992

CTR10230J: The Effect of Thermal Residual Stresses on the Asymmetric Constitutive Behavior of Metal-Matrix Composites - 01 December 1991

CTR10231J: Finite Element Analysis of Mixed-Mode Fracture of Bolted Composite Joints - 01 December 1991

CTR10232J: The Effects of Nonlinear Intralaminar Shear Behavior on the Modeling Accuracy of [(0/90)3,0]s and [(+45/−45)]3s Pin-Loaded Laminates - 01 December 1991

CTR10233J: Damage Processes in a Quasi-Isotropic Composite Short Beam Under Three-Point Loading - 01 December 1991

CTR10234J: Multiple Cracks in Three-Dimensional (3-D) Unidirectional Composites: Compliance and Energy Release Rates - 01 December 1991

CTR10236J: Book Review - 01 December 1991

JTE12609J: Methods of Determining Subcritical Crack Growth by Static Lifetime Tests with Natural and Artificial Cracks - 01 November 1991

JTE12614J: Ceramic Hardness - 01 November 1991

JTE12617J: Inherently Conducting Polymers - 01 November 1991

JTE12611J: Analysis of Large Diameter High-Density Polyethylene Plastic Pipes As Vertical Shafts in Landfills - 01 November 1991

JTE12593J: Models and Interactions - 01 September 1991

JTE12579J: Glossary (German/English, English/German) of Specialized Plastics Testing Terminology - 01 July 1991

CTR10214J: Failure Behavior of Woven Fabric Composites - 01 June 1991

CTR10216J: Book Review - 01 June 1991

CTR10210J: The Semi-Infinite Strip Problem in the Mechanics of Composite Materials - 01 June 1991

CTR10211J: Edge Delamination of (± θm/90n/2)s Laminates Subjected to Tensile Loading - 01 June 1991

CTR10212J: Design Approaches for Edge Delamination Resistance in Laminated Composites - 01 June 1991

CTR10213J: Multiple Transverse Cracking and Stiffness Reduction in Cross-Ply Laminates - 01 June 1991

JTE12559J: Nonintrusive Test for Argon Gas Content in Windows: Feasibility Study - 01 May 1991

JTE12565J: Theoretical Comparison of Error in KIc Values Determined by Different Testing Methods of Ceramics - 01 May 1991

JTE12564J: The Structural Ceramics Database: Data Acquisition Format for Monolithic Ceramics - 01 May 1991

CTR10069J: Fiber Pushout Test: A Three-Dimensional Finite Element Computational Simulation - 01 March 1991

CTR10070J: On the Determination of Fiber Strengths by In-Situ Fiber Strength Testing - 01 March 1991

CTR10071J: Elliptical-Core, Dual-Mode, Optical Fiber Strain and Vibration Sensors for Composite Material Laminates - 01 March 1991

CTR10072J: Influence of Test Fixture Configuration on the Measured Compressive Strength of a Composite Material - 01 March 1991

CTR10068J: Micromechanical Modeling of Fiber/Matrix Interface Effects in Transversely Loaded SiC/Ti-6-4 Metal Matrix Composites - 01 March 1991

CTR10073J: The Split Cantilever Beam Test for Characterizing Mode III Interlaminar Fracture Toughness - 01 March 1991

JTE12525J: A Thick Adherend, Instrumented Double-Cantilever-Beam Specimen for Measuring Debonding of Adhesive Joints - 01 January 1991

JTE12528J: A New Method for Burst Testing of Low Strength Materials - 01 January 1991

JTE12536J: Preparation and Certification of Uranium Oxide (U3O8) Spectrometric Reference Materials - 01 January 1991

JTE12535J: Metals Analysis in the Plastics Additives Industry: Quality Assurance Considerations - 01 January 1991

CTR10219J: Thermal Response of Fire-Exposed Composites - 01 January 1991

CTR10220J: A Study of Failure Characteristics in Thermoplastic Composite Material at 250°F (121°C) - 01 January 1991

CTR10221J: Comparison of Some Micromechanics Models for Discontinuously Reinforced Metal Matrix Composites - 01 January 1991

CTR10222J: Micromechanical Analysis of Filamentary Metal Matrix Composites Under Longitudinal Loading - 01 January 1991

CTR10223J: Delamination Growth in a Laminate with a Postbuckled Edge Delamination - 01 January 1991

CTR10224J: Degradation and Failure Modes of Carbon/Bismaleimide Laminates Subjected to a Tropical Environment - 01 January 1991

CTR10225J: Crack Speed Calculations for Unidirectional Laminae - 01 January 1991

CTR10226J: Stability Study of Coupling Responses in Laminates - 01 January 1991

CTR10227J: Book Review - 01 January 1991

CTR10199J: Tensile and Compressive Failure Modes of Laminated Composites Loaded by Fatigue with Different Mean Stress - 01 December 1990

CTR10200J: Cross-Ply Laminates with Holes in Compression: Straight Free-Edge Stresses Determined by Two- to Three-Dimensional Global/Local Finite Element Analysis - 01 December 1990

CTR10201J: Effect of Fiber Treatment on the Mechanical Properties of Hybrid Fiber-Reinforced Polystyrene Composites: I. Use of Mica and Wood Pulp as Hybrid Filler - 01 December 1990

CTR10202J: Introduction - 01 December 1990

CTR10203J: Residual Strength and Residual Fracture Toughness of Random Short-Fiber Composites during Cyclic Fatigue - 01 December 1990

CTR10204J: Polymer Composite Characterization for Automotive Structural Applications - 01 December 1990

CTR10205J: Study on the Effect of the Surface Treatment on the Residual Stress Gradient in Silicon Carbide (SiC) Reinforced Aluminum Metal Matrix Composites - 01 December 1990

CTR10206J: Study on the Crushing Response of Cylindrical Composite Shells Subjected to Transverse Loading - 01 December 1990

JTE12506J: Fracture of Defect Foam Core Sandwich Beams - 01 November 1990

JTE12493J: Influence of Test Methodology on Fatigue Crack Propagation in Engineering Plastics - 01 September 1990

JTE12497J: A K1 Calibration for a Modified Single Edge Notched Tension Specimen - 01 September 1990

CTR10189J: Evaluation of the V-Notched Beam Shear Test Through an Interlaboratory Study - 01 September 1990

CTR10190J: High-Temperature Tensile Properties of Fiber Reinforced Reaction Bonded Silicon Nitride - 01 September 1990

CTR10191J: On the Prediction of Tensile Strength after Impact of Composite Laminates - 01 September 1990

CTR10192J: Fatigue of Bolted Joints in SMC-R18 Sheet Molding Compound Composites - 01 September 1990

CTR10193J: Identification of Factors Affecting Single Filament Pull-Out Test Results - 01 September 1990

CTR10194J: Determination of Chemical Cure Shrinkage in Composite Laminates - 01 September 1990

CTR10195J: Review of the Nickel-Graphite Interface - 01 September 1990

CTR10196J: Book Review - 01 September 1990

JTE12481J: Experimental and Analytical Evaluation of the Mechanical Performance of a Gas-Fired Ceramic Radiant Tube at Steady-State - 01 July 1990

CTR10181J: Fiber-Matrix Interface Effects in the Presence of Thermally Induced Residual Stresses - 01 June 1990

CTR10182J: Residual Strength of Composite Laminates Subjected to Tensile-Compressive Fatigue Loading - 01 June 1990

CTR10183J: Postbuckling Characteristics in Delaminated Kevlar/Epoxy Laminates: An Experimental Study - 01 June 1990

CTR10184J: Failure Analysis of Composite Laminates with Free Edge - 01 June 1990

CTR10185J: Damage Development in Composite Laminates Under Monotonic Loading - 01 June 1990

JTE12473J: A Method for Uniform Shear Stress-Strain Analysis of Adhesives - 01 May 1990

JTE12458J: Development of Analytical Methodology and a Report on Collaborative Study on the Determination of Morpholine, Cyclohexylamine, and Diethylaminoethanol in Aqueous Samples by Direct Aqueous Injection Gas Chromatography - 01 March 1990

JTE12461J: Optimal Stress Amplitude Selection in Estimating Median Fatigue Limits Using Small Samples - 01 March 1990

CTR10173J: Laminate Behavior for SiC Fiber-Reinforced Reaction-Bonded Silicon Nitride Matrix Composites - 01 March 1990

CTR10174J: The Strength Prediction of Composite Laminates Containing a Circular Hole - 01 March 1990

CTR10175J: Unified Micromechanics of Damping for Unidirectional and Off-Axis Fiber Composites - 01 March 1990

CTR10172J: A Review of Compression Test Methods for Organic Matrix Composites - 01 March 1990

CTR10176J: Composite Bolted Joints Analysis Programs - 01 March 1990

CTR10177J: Correlations Between Ultrasonic Waveforms and Artificially Implanted Defects in Composite Materials - 01 March 1990

JTE12446J: Applicability of Modified J as a Fracture Parameter for Polycarbonate - 01 January 1990

CTR10164J: Analysis of the Localized Buckling in Composite Plate Structures with Application to Determining the Strength of Corrugated Fiberboard - 01 December 1989

CTR10165J: A Stiffness-Based Statistical Model for Predicting the Fatigue Life of Graphite/Epoxy Laminates - 01 December 1989

CTR10166J: Sublaminate Analysis of Interlaminar Fracture in Composites: Part I—Analytical Model - 01 December 1989

CTR10167J: Sublaminate Analysis of Interlaminar Fracture in Composites: Part II—Applications - 01 December 1989

CTR10168J: Comparison of Full 3-D, Thin-Film 3-D, and Thin-Film Plate Analyses of a Postbuckled Embedded Delamination - 01 December 1989

JTE11138J: A Technique to Evaluate the Bonding Reactivity of Thermosetting Adhesives - 01 November 1989

JTE11141J: Design of a Multi-Spring Floating Die Compaction System for Plastic Powders - 01 November 1989

JTE11129J: Morphological Structures in Analysis and Inspection of Hole Quality in Fiber Composites - 01 September 1989

JTE11130J: Applicability of the Southwell Plot to Shear Deformable Columns - 01 September 1989

JTE11131J: The Concept of Filament Strength and the Weibull Modulus - 01 September 1989

JTE11136J: Book Review - 01 September 1989

CTR10160J: A Close Look at the Embedment of Optical Fibers into Composite Structures - 01 September 1989

CTR10161J: Damping Behavior of Planar Random Carbon Fiber Reinforced 6061 Al Matrix Composites Fabricated by High-Pressure Infiltration Casting - 01 September 1989

CTR10156J: An Elastic Foundation Model to Predict the Growth of Delaminations - 01 September 1989

CTR10157J: The Effect of Delamination on the Fundamental and Higher Order Buckling Loads of Laminated Beams - 01 September 1989

CTR10158J: Predicted and Observed Effects of Stacking Sequence and Delamination Size on Instability Related Delamination Growth - 01 September 1989

CTR10159J: Deformational Behavior of a Unidirectional Graphite/Epoxy Composite Under Compressive Fatigue - 01 September 1989

JTE11121J: A Comparison of Test Methods for Shear Properties of the Cores of Sandwich Constructions - 01 July 1989

JTE11123J: Dynamic Reconciliation Algorithm Used on a High-Purity Propylene System - 01 July 1989

CCA10097J: Testing and Evaluation of a Novel Melamine-Based Superplasticizer in Concrete - 01 July 1989

CCA10099J: Behavior of Cement-Reduced and “Flowing” Fresh Concretes Containing Conventional Water-Reducing and “Second-Generation” High-Range Water-Reducing Admixtures - 01 July 1989

CCA10105J: Na2SO4 Soundness Test Evaluation - 01 July 1989

CTR10150J: An Evaluation of Composite Material Compression Test Methods - 01 June 1989

CTR10151J: The Effect of Cooling Rate on Residual Stress in a Thermoplastic Composite - 01 June 1989

CTR10152J: Predictions of Poisson's Ratio in Cross-Ply Laminates Containing Matrix Cracks and Delaminations - 01 June 1989

CTR10153J: Stiffness Change of a Graphite Epoxy Laminate Under Reverse Fatigue Loading - 01 June 1989

JTE11094J: Introduction to Symposium on Halogenated Solvents Technology—A Look at the Future - 01 March 1989

JTE11095J: CFC 113: A Unique Member of the Halogenated Solvent Family - 01 March 1989

JTE11100J: Federal Regulation of the Halogenated Solvents - 01 March 1989

JTE11102J: Apparent Stiffness of a Butt Joint with a Thick Adhesive Layer and Elastic-Plastic Adhesives - 01 March 1989

JTE11096J: Recent Scientific Developments That Affect the Assessment of Risk Posed by Trichloroethylene and Perchloroethylene - 01 March 1989

JTE11099J: Risk Assessment for Halogenated Solvents - 01 March 1989

CTR10144J: Free-Edge Delamination: Laminate Width and Loading Conditions Effects - 01 March 1989

CTR10145J: Interpretation of Experimental Results in the Single Pull-out Filament Test - 01 March 1989

CTR10146J: Screening of Metal Matrix Composites Using Ultrasonic C-Scans - 01 March 1989

CTR10147J: Note on Composite Size Effect - 01 March 1989

CTR10143J: Mechanics of Composite Materials: Past, Present, and Future - 01 March 1989

JTE11531J: Flexural and Shear Moduli of Full-Section Fiber Reinforced Plastic (FRP) Pultruded Beams - 01 January 1989

JTE11535J: Experimental Determination of Hydrostatic Compression versus Volume Change Curves for Cellular Solids - 01 January 1989

JTE11536J: Book Reviews - 01 January 1989

CCA10111J: Effect of Different Admixtures on the Strength of Sulphur Concrete - 01 January 1989

CTR10275J: Strain Energy Release Rate Analysis of the End-Notched Flexure Specimen Using the Finite-Element Method - 01 December 1988

CTR10276J: Relationship Between Strengthening Mechanisms and Fracture Toughness of Discontinuous SiC/Al Composites - 01 December 1988

CTR10277J: Determination of Nonlinear Shear Modulus of a Fiber-Reinforced Lamina from the Axial Behavior of (±45)s Specimens - 01 December 1988

CTR10278J: Evaluation of GIC of a DCB Specimen Using an Anisotropic Solution - 01 December 1988

CTR10279J: Compressive Strength and Mode of Failure of 8H Celion 3000/PMR15 Woven Composite Material - 01 December 1988

CTR10280J: Prediction of the Microyield Strength of Polymer Matrix Composites - 01 December 1988

CTR10281J: The Effect of Cutting Speed and Width of Cut on Interlaminar Tensile Strength of Graphite/Epoxy Composite Material - 01 December 1988

JTE11628J: Book Reviews - 01 September 1988

CTR10136J: Compressive Fatigue and Static Properties of a Unidirectional Graphite/Epoxy Composite - 01 September 1988

CTR10137J: Buckling of a Damaged Sublaminate in an Impacted Laminate - 01 September 1988

CTR10138J: A One Specimen Mode I Delamination Test for Composite Materials - 01 September 1988

CTR10139J: Strain Measurement in Thick-Walled Composite Rocket Motor Case Coupons Using Moire Interferometry - 01 September 1988

CTR10140J: Composites in Shock and Vibration Isolation - 01 September 1988

CTR10135J: Fiber Composite Sandwich Thermostructural Behavior: Computational Simulation - 01 September 1988

CTR10128J: Braided to Net Section Graphite/Epoxy Composite Shapes - 01 June 1988

CTR10129J: Development of SiC Reinforced Titanium Corrugated Structures - 01 June 1988

CTR10130J: Continuous Strain Finite-Element Analysis of Free-Edge Effect in Laminated Composite Specimens - 01 June 1988

CTR10131J: Compressive Strength of Composite Sandwich Panels After Impact Damage: An Experimental and Analytical Study - 01 June 1988

CTR10132J: The Strength of Laminated Composite Materials Under Repeated Impact Loading - 01 June 1988

JTE10381J: Evaluation of Singular Intensity Factors in Elastic-Plastic Materials - 01 May 1988

JTE10389J: Book Review - 01 May 1988

JTE11156J: Establishing Criteria for a Computerized Vision Inspection of Holes Drilled in Carbon Fiber Composites - 01 March 1988

CTR10269J: A Rugged Optical Fiber Interferometer for Strain Measurements Inside a Composite Material Laminate - 01 March 1988

CTR10270J: Water Absorption of Resins and Composites: III. Water Distribution as Indicated by Capacitance Measurement - 01 March 1988

CTR10271J: Water Absorption of Resins and Composites: IV. Water Transport in Fiber Reinforced Plastics - 01 March 1988

CTR10273J: Book Reviews - 01 March 1988

CTR10268J: Influence of Cyclic Load Amplitude on Damage Accumulation and Fracture of Composite Laminates - 01 March 1988

JTE11054J: An Experimental Technique for Determining a Measure of Structural Damping - 01 January 1988

JTE11053J: A Simple, High Precision Biaxial Extensometer for High Temperature Creep Study - 01 January 1988

CTR10433J: Study of Matrix Cracking and Delamination in Glass/Epoxy Laminates - 01 December 1987

CTR10434J: A Mixed Updated Lagrangian Formulation for Plane Elastic Problems - 01 December 1987

CTR10435J: Structural Properties of Braided Graphite/Epoxy Composites - 01 December 1987

CTR10436J: The Challenge and Opportunity for Composites in Structural Orthopaedic Applications - 01 December 1987

CTR10437J: Water Absorption of Resins and Composites: II. Diffusion in Carbon and Glass Reinforced Epoxies - 01 December 1987

JTE11028J: Stress Analysis of the Cracked-Lap-Shear Specimen: An ASTM Round-Robin - 01 November 1987

JTE11031J: Compliance Expression for the Middle Cracked Tension Specimen: 2a/W = f(EBV/P) - 01 November 1987

JTE11032J: Strain Distribution and Temperature Increase During Plane Strain Compression Testing - 01 November 1987

CTR10249J: Water Absorption of Resins and Composites: I. Epoxy Homopolymers and Copolymers - 01 September 1987

CTR10250J: Strength and Failure Modes in Notched Pultruded Rod Tension Specimens - 01 September 1987

CTR10246J: The Effect of Thickness on Interlaminar Stresses and Delamination in Straight-Edged Laminates - 01 September 1987

CTR10247J: In-Plane and Interlaminar losipescu Shear Properties of Various Graphite Fabric/Epoxy Laminates - 01 September 1987

CTR10248J: Failure Analysis of Brittle Fracture in Nonceramic Insulators - 01 September 1987

JTE11010J: A Model for Predicting Fracture Toughness of a Cementitious Particulate Composite Molded under Impact Pressure - 01 July 1987

CCA10394J: The Inhibition of Chloride-Induced Corrosion in Reinforced Concrete by Calcium Nitrite - 01 July 1987

CCA10396J: Effect of Chemical Admixtures on Portland Cement Hydration - 01 July 1987

CTR10426J: Filament-Wound Spherical Pressure Vessels: A State-of-the-Art Review - 01 June 1987

CTR10427J: Impact-Induced Fracture in a Quasi-Isotropic Laminate - 01 June 1987

CTR10428J: Thin-Walled Laminated Composite Cylindrical Tubes: Part I—Boundary Value Problems - 01 June 1987

CTR10429J: Thin-Walled Laminated Composite Cylindrical Tubes: Part II—Bending Analysis - 01 June 1987

CTR10430J: Thin-Walled Laminated Composite Cylindrical Tubes: Part III—Bending Analysis - 01 June 1987

JTE10990J: A New Method of Measuring the Modulus of Elasticity of Material by Analyzing the Relation Between Loading Position and Displacement of a Beam Bent by a Traveling Load - 01 March 1987

JTE10991J: Improved Impulse-Frequency Response Techniques for Measurement of Dynamic Mechanical Properties of Composite Materials - 01 March 1987

JTE10992J: System for the Adaptation of Tensile Testing Machines for Executing Torsional Tests - 01 March 1987

CTR10421J: Investigation of Fiber Bridging in Double Cantilever Beam Specimens - 01 March 1987

CTR10422J: Temperature and Deflection Data From the Asymmetric Heating of Cross-Ply Composite Tubes - 01 March 1987

CTR10423J: Method for Hygromechanical Characterization of Graphite/Epoxy Composite - 01 March 1987

CTR10420J: Deformation of a Metal-Matrix Tensile Coupon with a Central Slot: An Experimental Study - 01 March 1987

JTE11547J: A Compression Test for High Strength Ceramics - 01 January 1987

CTR10334J: Deformation and Fracture of Random Short-Fiber SMC Composite Under Multiaxial Loading - 01 December 1986

CTR10335J: Survey of Failure and Post-Failure Theories of Laminated Fiber-Renforced Composites - 01 December 1986

CTR10336J: Survey of Sand and Rain Erosion of Composite Materials - 01 December 1986

CTR10337J: A Stiffness-Based Approximate Method for Sizing of Nonuniform-Thickness Sandwich Components - 01 December 1986

CTR10338J: Additional Comparisons of Interlocked Fabric and Laminated Fabric Kevlar 49/Epoxy Composites - 01 December 1986

JTE10338J: Bibliography on Clean Glass: Supplement I - 01 September 1986

JTE10335J: A Microcomputer-Based System for the High-Speed Compression Test by the Split Hopkinson Pressure Bar Technique - 01 September 1986

JTE10342J: Book Reviews - 01 September 1986

CTR10330J: High Quality Organic Matrix Composite Specimens for Research Purposes - 01 September 1986

CTR10331J: Average Stress-Strain Curves for Resin Matrix Composites - 01 September 1986

CTR10326J: Assessment of Simplified Composite Micromechanics Using Three-Dimensional Finite-Element Analysis - 01 September 1986

CTR10327J: Preliminary Noise Control Guidelines for the Design of High-Speed Machinery - 01 September 1986

CTR10328J: The Effects of Radiation on the Interlaminar Fracture Toughness of a Graphite/Epoxy Composite - 01 September 1986

CTR10329J: Fabrication and Quality Assurance Processes for Superhybrid Composite Fan Blades - 01 September 1986

JTE11264J: Effect of Axial Compression - 01 July 1986

CTR10320J: Residual Thermal and Moisture Influences on the Strain Energy Release Rate Analysis of Edge Delamination - 01 June 1986

CTR10321J: Characterizing Matrix Resin Flow in Carbon Fiber Prepreg - 01 June 1986

CTR10322J: Finite-Element Analysis of End-Notch Flexure Specimens - 01 June 1986

CTR10323J: Preliminary Design of Cracked-Lap Shear Specimen Thickness for Determination of Interlaminar Fracture Toughness - 01 June 1986

JTE11392J: A Preliminary Examination of the Laboratory Sheen Test - 01 May 1986

JTE10328J: Analysis of Service Failures in Thermoplastic Pressure Piping Water Systems - 01 March 1986

JTE10331J: Simple Analysis of Gluconate in Cleaner - 01 March 1986

CTR10316J: Factors Influencing the Ultrasonic Stress Wave Factor Evaluation of Composite Material Structures - 01 March 1986

CTR10317J: Composite Standards Activities of the Society of Automotive Engineers - 01 March 1986

CTR10314J: Influence of Interface Ply Orientation on Fatigue Damage of Adhesively Bonded Composite Joints - 01 March 1986

CTR10315J: ICAN: Integrated Composites Analyzer - 01 March 1986

CCA10062J: Chloride Concentrations in Concrete Pore Solutions Resulting from Calcium and Sodium Chloride Admixtures - 01 January 1986

CTR10307J: The Influence of Moisture and Toughened Resin on the Mixed Mode Fracture of Unidirectional Graphite/Epoxy Laminates - 01 December 1985

CTR10308J: Detection of Delamination Onset in a Composite Laminate Using Moiré Interferometry - 01 December 1985

CTR10309J: Longitudinal Compressive Failure Modes in Fiber Composites: End Attachment Effects on IITRI Type Test Specimens - 01 December 1985

CTR10310J: Comparison of Interlocked Fabric and Laminated Fabric Kevlar 49/Epoxy Composites - 01 December 1985

JTE10977J: A Methodology for the Evaluation of the Thermal Performance of Phase-Change Storage Materials - 01 November 1985

JTE10968J: Test Method for Evaluation of Shear Modulus and Modulus of Elasticity of Laminated Anisotropic Composite Materials - 01 September 1985

JTE10969J: Book Review - 01 September 1985

CTR10301J: A Damage Tolerant Design Parameter for Graphite/Epoxy Laminated Composites - 01 September 1985

CTR10302J: The Effect of Slots on the Buckling and Postbuckling Behavior of Laminated Plates - 01 September 1985

CTR10303J: A Method to Estimate the Overall Behavior of Fiber-Reinforced Hybrid Composites - 01 September 1985

CTR10304J: Long-Term Characteristics of Fiber-Reinforced Plastic Under Mechanical Stress and an Acidic Environment - 01 September 1985

CTR10293J: Design Concepts for Low-Cost Composite Engine Frames - 01 June 1985

CTR10294J: Laboratory Production of Discontinuous-Aligned Fiber Composite Plates Using an Autoclave-Style Press Cure - 01 June 1985

CTR10295J: Influence of Damage on Mechanical Properties of Woven Composites at Low Temperatures - 01 June 1985

CTR10296J: Recent Advances in Technology for Composite Materials in the United States - 01 June 1985

CTR10297J: A Simple Calculation of Strain-Energy Release Rate for a Nonlinear Double Cantilever Beam - 01 June 1985

JTE10790J: Recent Advances in Ion Mobility Spectrometry for Explosives Vapor Detection - 01 May 1985

JTE10768J: Algebraic Approximations of Stress-Strain Curves for Kevlar-Reinforced Composites - 01 March 1985

JTE10772J: Evaluation of the Mechanical Behavior of Plain and Spirally Stiffened Polyvinyl Chloride Pipes - 01 March 1985

JTE10773J: Determination of Crack Growth Parameter N in Ceramics Under Creep Conditions - 01 March 1985

CTR10287J: Evaluation of Bending Test Methods for Composite Materials - 01 March 1985

CTR10288J: Characterization of the Cure of Carbon Fiber/Epoxy Composite Prepregs by Differential Scanning Calorimetry - 01 March 1985

CTR10289J: Biaxial Stress Testing of Intraply Hybrid Composites - 01 March 1985

CTR10290J: A Conceptual Framework for the Interpretation of Fatigue Damage Mechanisms in Composite Materials - 01 March 1985

CTR10286J: Effects of Mean Stress on the Fatigue of Composite Materials - 01 March 1985

CTR10836J: Fracture Modes Identification of Composite Materials by Acoustic Emission Analysis - 01 December 1984

CTR10837J: Analysis of Neat Resin Cracking Induced by Rapid Moisture Loss - 01 December 1984

CTR10838J: Theoretical Relations Between Static Strength and Lifetime Distributions of Composites: An Evaluation - 01 December 1984

CTR10839J: Fractography Used to Identify Defective 0° Graphite/Epoxy Specimens - 01 December 1984

CTR10840J: Moisture Diffusion and Solid-State NMR Investigations on the Physical Aging Processes in Network Epoxy Glasses - 01 December 1984

CTR10841J: Prediction of Instability Point During Fracture of Composite Materials - 01 December 1984

CTR10842J: Composite Interlaminar Fracture: Effect of Matrix Fracture Energy - 01 December 1984

JTE10742J: Crack Growth in High-Density Polyethylene Pipes - 01 November 1984

JTE10745J: Processibility Testing of Styrene-Butadiene Rubber 1500 - 01 November 1984

JTE10746J: Effects of Mechanical Drying on Styrene-Butadiene Rubber - 01 November 1984

JTE10747J: Estimation of End Corrections in Capillary Flow - 01 November 1984

JTE10748J: Improvement of Standard Rheological Tests for Better Material Characterization - 01 November 1984

CTR10826J: Relationship Between Phase Difference and Coefficient of Restitution During Low Velocity Foreign Object Transverse Damage of Composite Plates - 01 October 1984

CTR10827J: Coefficient of Restitution for Low Velocity Transverse Impact of Thin Graphite-Epoxy Laminates - 01 October 1984

CTR10828J: Computer-Aided Ultrasonic Evaluation of Fiber FP Metal Matrix Composites - 01 October 1984

CTR10829J: Engineering Life Prediction of Composite Materials: Elements of a Mechanistic Model - 01 October 1984

CTR10830J: Influence of Simulated Space Environment on the Behavior of Carbon-Fiber-Reinforced Plastics with ±45° Ply Orientations—Part 2 - 01 October 1984

CTR10831J: Studies on Bonding at the Aramid-Epoxy Interface - 01 October 1984

CTR10832J: World of Composites - 01 October 1984

CTR10833J: Literature Reviews - 01 October 1984

JTE10734J: Book Reviews - 01 September 1984

JTE10711J: Introduction to Symposium on Advances in Atomic Spectroscopy - 01 July 1984

JTE10712J: Progress in Inductively Coupled Plasma Analytical Spectroscopy - 01 July 1984

JTE10713J: Application of Inductively Coupled Plasma Atomic Fluorescence Spectrometry in the Steel Industry - 01 July 1984

JTE10714J: Advances in Atomic Absorption Graphite Furnace Analysis - 01 July 1984

JTE10716J: Guiding Computers to Produce Accurate Spectrochemical Analysis - 01 July 1984

CTR10817J: Fracture Mechanics of Sublaminate Cracks in Composite Materials - 01 July 1984

CTR10818J: Hygrothermal Effects on Stresses and Deformations in a Bonded Fiber-Reinforced Plastic/Aluminum System - 01 July 1984

CTR10819J: Survey of Bolted-Joint Technology in Composite Laminates - 01 July 1984

CTR10820J: NMR Characterization of Boron Trifluoride-Amine Catalysts Used in the Cure of Carbon Fiber/Epoxy Prepregs - 01 July 1984

CTR10821J: Influence of a Simulated Space Environment on the Behavior of Carbon-Fiber-Reinforced Plastics with ±45° Ply Orientations—Part 1 - 01 July 1984

CTR10823J: Literature Reviews - 01 July 1984

JTE11065J: The Sandwich Method—A Proposed Approach to the Measurement of Oxygen Transmission Rate Through Moisture-Sensitive Barrier Films - 01 May 1984

CTR10877J: Spherical Kevlar 49/Epoxy Vessels with 430-MPa (62-ksi) Burst Pressures - 01 April 1984

CTR10878J: General and Specific Quadratic Yield Functions - 01 April 1984

CTR10879J: The Use of Proper Shear Moduli in the Analysis of Laminated Composites - 01 April 1984

CTR10880J: Nomograph for Thicknesses Calculation in a Filament-Wound Pressure Vessel - 01 April 1984

CTR10881J: Life Estimation of Aramid/Epoxy Composites Under Sustained Tension - 01 April 1984

CTR10876J: Damage Development Near the Edges of a Composite Specimen During Quasi-static and Fatigue Loading - 01 April 1984

JTE10701J: Deconvolution, Derivation, and Smoothing of Spectra Using Fourier Transforms - 01 March 1984

JTE10702J: Multicomponent Infrared Analysis Using P-Matrix Methods - 01 March 1984

JTE10706J: Pilot Study for U.S. Geological Survey Standard Reference Water Samples for Pesticides - 01 March 1984

JTE11414J: A Multistep Shear Test for Bond Strength of Claddings - 01 January 1984

JTE11418J: Fourier Transform Infrared Spectroscopy of Polymers—Theory and Application - 01 January 1984

JTE11419J: Advantages of Using Data from Fourier Transform Infrared Spectrophotometers for Process Control - 01 January 1984

CTR10808J: The Effect of a Coating on the Thermo-Oxidative Stability of Celion 6000 Graphite Fiber/PMR 15 Polyimide Composites - 01 December 1983

CTR10809J: The Deformation and Failure Processes of Kevlar 49 Single Filaments - 01 December 1983

CTR10810J: Effects of Lay-Up, Temperature, and Loading Rate in Double Cantilever Beam Tests of Interlaminar Crack Growth - 01 December 1983

CTR10811J: Aging Results for PRD 49 III/Epoxy and Kevlar 49/Epoxy Composite Pressure Vessels - 01 December 1983

CTR10812J: World of Composites - 01 December 1983

CTR10813J: Literature Review - 01 December 1983

CTR10805J: Literature Reivew - 01 October 1983

CTR10800J: World of Composites - 01 October 1983

CTR10801J: A Stress Separation Technique for Photo-Orthotropic Elasticity - 01 October 1983

CTR10802J: Shear Characteristics of Glass Fiber/Epoxy Laminates - 01 October 1983

CTR10803J: Stress-Optical Microscopy Studies of the Microscopic Deformation and Failure Modes of Kevlar 49/Epoxy Composites - 01 October 1983

CTR10804J: No-Stress Aging of Aramid/Epoxy Composites - 01 October 1983

JTE10290J: A New Test Method for Determining Environmental Stress-Crack Resistance of Ethylene Based Plastics - 01 July 1983

JTE10291J: Cross-Linking of Polyfluoroolefin Copolymers - 01 July 1983

JTE10292J: Ethylene-Propylene-Diene Monomer (EPDM) and Fluorocarbon (FKM) Elastomers in the Geothermal Environment - 01 July 1983

JTE10293J: A Basis for Predicting Longtime Behavior from Short-Time Tests of Geothermal Sealants - 01 July 1983

JTE10294J: Book Reviews - 01 July 1983

CTR10792J: World of Composites - 01 July 1983

CTR10793J: Tensile Property Evaluation of Polycrystalline Alumina Filaments and Their Composites - 01 July 1983

CTR10794J: On the Off-Axis Tension Test for Unidirectional Composites - 01 July 1983

CTR10795J: Silicon Carbide Yarn Stimulates Development of New Composites - 01 July 1983

CTR10796J: Generic Aspects of Three-Dimensional Internal-Damage Development in Fatigue-Loaded Composite Laminates - 01 July 1983

CTR10797J: Literature Review - 01 July 1983

JTE10677J: Fractographic Examination in the Scanning Electron Microscope as a Tool in Evaluating Through-Thickness Tension Test Results - 01 May 1983

JTE10685J: Book Reviews - 01 May 1983

CTR10785J: A Finite Element Analysis of Composite Tension Specimens - 01 April 1983

CTR10786J: An Epoxy Resin System for Composite Flywheels - 01 April 1983

CTR10787J: Life Estimation of an S-Glass®/Epoxy Composite Under Sustained Tensile Loading - 01 April 1983

CTR10788J: A Mixed-Mode Fracture Criterion for Composite Materials - 01 April 1983

CTR10789J: Literature Reviews - 01 April 1983

CTR10784J: Drop Weight Impact Testing of Laminates Reinforced with Kevlar® Aramid Fibers, E-Glass, and Graphite - 01 April 1983

JTE11590J: Book Reviews - 01 January 1983

CTR10771J: World of Composites - 01 December 1982

CTR10772J: Advances in a Structural Sheet Molding Compound - 01 December 1982

CTR10773J: Three-Dimensional Analysis of [0/90]s and [90/0]s Laminates with a Central Circular Hole - 01 December 1982

CTR10774J: Surface Weatherability of Glass-Fiber Reinforced Polyester Sheeting. II. Effect of Constituents - 01 December 1982

CTR10775J: Within-Panel Variability and Scaling Effects in Composite Materials - 01 December 1982

CTR10776J: An Equation for Bolt Clampup Relaxation in Transient Environments - 01 December 1982

CTR10777J: Evaluation of Finite-Element Software Packages for Stress Analysis of Laminated Composites - 01 December 1982

CTR10778J: Recent Work in the Fractography of Composite Materials - 01 December 1982

CTR10779J: Literature Reviews - 01 December 1982

JTE10264J: Goodness-of-Fit of the Ramberg-Osgood Analytic Stress-Strain Curve to Tensile Test Data - 01 November 1982

JTE10265J: Experimental Determination of Lüders Band Parameters from Load-Elongation Data - 01 November 1982

CTR10871J: Survey of Recent Research in the Analysis of Composite Plates - 01 October 1982

CTR10872J: Flexural Creep of a High-Fiber-Content Sheet Molding Compound Composite - 01 October 1982

CTR10873J: Literature Reviews - 01 October 1982

CTR10863J: World of Composites - 01 October 1982

CTR10864J: Fatigue of Graphite/Epoxy [0/90/45/−45]s Laminates Under Dual Stress Levels - 01 October 1982

CTR10865J: Approximate Analysis of Postbuckled Through-Width Delaminations - 01 October 1982

CTR10866J: Nonlinear Matrix Failure Criterion for Fiber-Reinforced Composite Materials - 01 October 1982

CTR10867J: Surface Weatherability of Glass-Fiber-Reinforced Polyester Sheeting. I. Effect of Modification of Resin Chemical Composition - 01 October 1982

CTR10868J: The Relation Between the Network Structure, Deformation and Failure Processes, and Mechanical Properties of Epoxies - 01 October 1982

CTR10869J: Environmental Stability of Kevlar 49 Fiber for Flywheel Applications - 01 October 1982

CTR10870J: The Effect of Physical Aging on the Time-Dependent Properties of Carbon-Fiber-Reinforced Epoxy Composites - 01 October 1982

JTE10251J: Dynamic Effective Young's Modulus of Thin Adhesive Layers in Bonded Joints - 01 September 1982

JTE10258J: Book Reviews - 01 September 1982

JTE11573J: Effect of Weathering at Different Exposure Angles on the Tensile Impact Resistance of Thermoplastics - 01 July 1982

CTR10761J: World of Composites - 01 July 1982

CTR10762J: Microscopic Observations of Cross Sections of Impacted Composite Laminates - 01 July 1982

CTR10763J: Analytical/Experimental Correlations of Stiffness Properties of Unidirectional Composites - 01 July 1982

CTR10764J: Reinforced Aluminum Composites for Underwater Systems - 01 July 1982

CTR10765J: An Approximate Method of Sizing Soluble Plaster Mandrels in Filament Winding - 01 July 1982

CTR10766J: Failure Analysis of Composites Using Auger Electron Spectroscopy - 01 July 1982

CTR10767J: On the Measurement of Lamina In-Plane Shear Strength - 01 July 1982

CTR10768J: Literature Review - 01 July 1982

JTE10241J: A New Scale of Microtension Test for Polymers - 01 May 1982

CTR10755J: Strain Rate, Temperature, and Humidity Influences on Strength and Moduli of a Graphite/Epoxy Composite - 01 April 1982

CTR10756J: Measurement of Nonuniform Microstrain in Composite Laminates - 01 April 1982

CTR10757J: Isotropic and Singular Points in Photoelasticity of Composites - 01 April 1982

CTR10758J: Literature Reviews - 01 April 1982

CTR10753J: World of Composites - 01 April 1982

CTR10754J: Strain-Controlled Flexural Fatigue of Unidirectional Composites - 01 April 1982

JTE10234J: Rate Sensitive Tensile Impact Properties of Fully and Partially Loaded Unidirectional Composites - 01 March 1982

CCA10232J: Development of High-Strength Concrete Incorporating a Large Percentage of Fly Ash and Superplasticizers - 01 January 1982

CTR10741J: World of Composites - 01 December 1981

CTR10742J: Residual Thermal Stresses in Bonded Metal and Fiber-Reinforced Plastic Systems - 01 December 1981

CTR10743J: A Loading Rate and Environmental Effects Study of Adhesive Bonded Sheet Molding Compound Joints - 01 December 1981

CTR10744J: Effect of a Resin Interlayer on Composites with Free Edges - 01 December 1981

CTR10745J: Graphite-Fiber-Reinforced Glass for Spacecraft Applications - 01 December 1981

CTR10746J: Absorbed Moisture and Stress-Wave Propagation in Graphite/Epoxy - 01 December 1981

CTR10747J: Compressive Strength of a Unidirectional Graphite/Epoxy Composite Following a Tensile Proof-Load - 01 December 1981

CTR10748J: Strain Field Response of 0° Glass/Epoxy Composites Under Tension - 01 December 1981

CTR10749J: Literature Reviews - 01 December 1981

JTE11239J: Erosion Behavior of Polystyrene - 01 November 1981

CTR10733J: The Relation Between Physical Structure and Deformation and Failure Processes of Kevlar 49 Fibers - 01 October 1981

CTR10734J: Generalized Stress-Strain Relations of Laminated Composite Materials - 01 October 1981

CTR10735J: Improvement of the First-Ply-Failure Strength in Laminates by Using Softening Strips - 01 October 1981

CTR10736J: Warping of Unsymmetric Cross-Ply Graphite/Epoxy Laminates - 01 October 1981

CTR10737J: Composite Materials Education in the United States - 01 October 1981

CTR10738J: Literature Reviews - 01 October 1981

CTR10732J: Tensile Fatigue Performance of Glass Fiber Dominated Composites - 01 October 1981

JTE11520J: Simultaneous Determination of Shear and Young's Moduli in Composites - 01 September 1981

JTE11522J: Design of a Dynamic Gear Test Rig - 01 September 1981

CCA10203J: Influence of Pozzolanic, Slag, and Chemical Admixtures on Pore Size Distribution and Permeability of Hardened Cement Pastes - 01 July 1981

CTR10723J: World of Composites - 01 July 1981

CTR10724J: Equations for Estimating the Bending Modulus of Elasticity of Rigid Plastics by Extrapolation - 01 July 1981

CTR10725J: The Compressive Failure of Graphite/Epoxy Plates with Circular Holes - 01 July 1981

CTR10726J: Evaluation of Metal Ribbon Reinforced/Resin Matrix Composites - 01 July 1981

CTR10727J: Engineering Properties of a Filament-Wound Kevlar 49/Epoxy Composite - 01 July 1981

CTR10728J: Results of the ASTM Round-Robin on the Rail Shear Test for Composites - 01 July 1981

CTR10714J: The Effect of Lamination-Induced Stresses on Fatigue Damage Development at Internal Flaws - 01 April 1981

CTR10715J: Elastic Constants of Mat-Reinforced Laminates - 01 April 1981

CTR10716J: The Effect of Stress Nonuniformity and Size on the Strength of Composite Materials - 01 April 1981

CTR10717J: The Effect of Vacuum and Temperature on the Mechanical Properties of an Aramid/Epoxy Composite - 01 April 1981

CTR10718J: Stress Redistribution in Composite Laminates - 01 April 1981

CTR10719J: Surface Replication: A Reliable Method of Detecting Matrix Cracks in Composite Laminates - 01 April 1981

CTR10720J: Book Review - 01 April 1981

CTR10712J: World of Composites - 01 April 1981

CTR10713J: Experimental Evaluation of Column Compression Properties of Graphite/Epoxy Composites - 01 April 1981

JTE10642J: Effect of Specimen Shape and Cyclic Loading on Tension Tests of Two Epoxy Resins - 01 January 1981

JTE10644J: A Procedure for Strain-Controlled High-Cycle Fatigue Testing at Elevated Temperatures - 01 January 1981

JTE10645J: Effect of Understressing and Coaxing on the Fatigue Limit of a Transverse Butt-Welded Joint - 01 January 1981

JTE10646J: Statistical Fatigue Failure Analysis - 01 January 1981

JTE10647J: Chevron V-Notched Bend Specimen for KIc Measurement of Brittle Materials - 01 January 1981

CCA10213J: Attack of Aggressive Fluids - 01 January 1981

JTE10625J: A Hot Compression Testing Apparatus for the Study of Isothermal Forging - 01 November 1980

JTE10616J: Error Analysis of Intrinsic Viscosity Measurements - 01 September 1980

JTE10617J: The Shear Strain to Fracture Characteristics of a Titanium Alloy and an Ultrahigh Molecular Weight Polyethylene Under Complex Loading Conditions - 01 September 1980

JTE11611J: Application of Accelerated Weathering Test to Glass-Fiber Reinforced Polyester Sheets of Improved Surface Durability - 01 July 1980

JTE11614J: An Acceptance Plan for Feather and Down Products - 01 July 1980

CCA10176J: Effect of Mixing Temperature on Slump Loss and Setting Time of Concrete Containing High-Range Water Reducers - 01 July 1980

CTR10705J: Characterizing Rheological Cure Behavior of Epoxy Composite Materials - 01 July 1980

CTR10706J: Preliminary Development of an Epoxy Resin System for Flywheel Applications - 01 July 1980

CTR10707J: Structural Adhesives Rheological Behavior Response to Process-Environmental Variation - 01 July 1980

CTR10700J: World of Composites - 01 July 1980

CTR10708J: Research Briefs - 01 July 1980

CTR10701J: The Microscopic Failure Processes of Kevlar/Epoxy Composites - 01 July 1980

CTR10702J: Simplified Formulas for Elastic Moduli of Unidirectional Continuous Fiber Composites - 01 July 1980

CTR10703J: Width Effects on Stresses in Graphite/Epoxy Laminates with Loaded Holes - 01 July 1980

CTR10704J: Isotropic Character of Quasi-Isotropic Lay-ups - 01 July 1980

JTE10606J: Effect of Clamping Pressure on the Fatigue Strength of Dimpled and Undimpled Loaded Holes - 01 May 1980

CTR10856J: Predicting the Critical Buckling Load for a Graphite/Epoxy Laminate - 01 April 1980

CTR10857J: Fundamental Aspects of Composites Reinforced with Glassy Metal Ribbons - 01 April 1980

CTR10858J: Response of Graphite/Epoxy Composite Laminates with Embedded Notches - 01 April 1980

CTR10859J: A Cycloaliphatic Epoxy Resin/Anhydride System Usable up to 150°C - 01 April 1980

CTR10860J: Research Briefs - 01 April 1980

CTR10855J: Measuring In-Plane Shear Properties of Glass-Fiber/Epoxy Laminates - 01 April 1980

CCA10185J: Pigments for Integrally Colored Concrete - 01 January 1980

CTR10693J: Influence of Penetrants Used in X-Ray Radiography on Compression Fatigue Life of Graphite/Epoxy Laminates - 01 January 1980

CTR10694J: Quasi-Isotropic, Thick Composite Laminates Fabricated by the Matched Metal Die Compression Molding Process - 01 January 1980

CTR10695J: Environmental Sensitivity of Epoxies - 01 January 1980

CTR10696J: Research Briefs - 01 January 1980

CTR10688J: World of Composites - 01 January 1980

CTR10697J: Conference Reports - 01 January 1980

CTR10689J: Spacecraft Requirements for Dimensionally Stable Composites - 01 January 1980

CTR10690J: Fatigue Performance of High Strength Molding Compounds - 01 January 1980

CTR10691J: Prediction of Fatigue Life in Fiberglass-Reinforced Plastic Structures by Acoustic Emission Analysis - 01 January 1980

CTR10692J: The Effect of Tetrabromoethane-Enhanced X-Ray Inspection on Fatigue Life of Resin-Matrix Composites - 01 January 1980

JTE11507J: A New Load-Transmitting Medium to Measure Strength of Brittle Materials - 01 November 1979

JTE10226J: Nondestructive Evaluation of Hygrothermal Effects on Fiber-Reinforced Plastic Laminates - 01 September 1979

JTE10221J: Computer Simulation of the Tension Test: Effect of Testing Conditions - 01 September 1979

JTE11379J: Correlation of Fiber Composite Tensile Strength with the Ultrasonic Stress Wave Factor - 01 July 1979

CTR10684J: Effect of Storage Time on the Tensile Strength of Kevlar 49/Epoxy Strands - 01 July 1979

CTR10685J: Research Briefs - 01 July 1979

CTR10681J: Effect of Gage-Section Size on Composite Stiffness Measurements - 01 July 1979

CTR10682J: Advanced Characterization Techniques for Composite and Adhesive Manufacturing Process Control - 01 July 1979

CTR10683J: Simple Torsion Test for Determining the Shear Moduli of Orthotropic Composites - 01 July 1979

JTE11218J: Use of the Double Torsion Method to Study Crack Propagation in an Adhesive Layer - 01 May 1979

JTE11219J: Cohesive Bond Strength Prediction for Adhesive Joints - 01 May 1979

CTR10675J: The Slotted Tension Shear Test for Composite Laminates - 01 April 1979

CTR10676J: Aging Data for Kevlar 49/Epoxy Pressure Vessels - 01 April 1979

CTR10677J: Research Briefs - 01 April 1979

CTR10670J: World of Composites - 01 April 1979

CTR10671J: Filament Wound Large E-Glass/Epoxy Spars and Blades - 01 April 1979

CTR10672J: Co-Cured Graphite/Epoxy Vertical Fin Spar - 01 April 1979

CTR10673J: Filament Wound Kevlar 49/Epoxy Rocket Motor Cases - 01 April 1979

CTR10674J: ADV*LAM—An Advanced Laminate Code for Viscoelastic Analysis - 01 April 1979

JTE11211J: A Correlative Study Between Analysis and Experiment on the Fracture Behavior of Graphite/Epoxy Composites - 01 March 1979

JTE11199J: Fracture Modes and Acoustic Emission of Composite Materials - 01 January 1979

CCA10404J: Use of Superplasticizers as Water Reducers - 01 January 1979

CTR10664J: Life Prediction of Composite Pressure Vessels - 01 January 1979

CTR10665J: Research Briefs - 01 January 1979

CTR10666J: Educational Opportunities - 01 January 1979

CTR10659J: World of Composites - 01 January 1979

CTR10660J: Boron Aluminum Tube Struts for the NASA Space Shuttle - 01 January 1979

CTR10661J: A Room Temperature Stable “B” Staging Epoxy Resin System - 01 January 1979

CTR10662J: A New DAP-Polyester Resin for Carbon Fibers - 01 January 1979

CTR10663J: Ultrasonic Testing Methods for Composite Materials - 01 January 1979

JTE10578J: Fracture Toughness Evaluation of Polymers with Surface-Crack Specimens - 01 November 1978

JTE10579J: Fracture Toughness of Stretched Acrylic Plastic - 01 November 1978

JTE10580J: The “Instantaneous” Effect of Internal Moisture Conditions on the Strength of Glass-Fiber-Reinforced Plastics - 01 November 1978

JTE10581J: A Composite Grip Design for Elimination of Extraneous Noise During Acoustic Emission Testing - 01 November 1978

CTR10656J: Research Briefs - 01 October 1978

CTR10650J: Filament Wound Pressure Vessels - 01 October 1978

CTR10651J: Thermal Expansion Compensating Linkage—A Metal/Composite Joint Design - 01 October 1978

CTR10652J: Evaluating a Hybrid Composite/Steel Tapered Box Beam for Advanced Ship Structures - 01 October 1978

CTR10653J: Aramid/Polyester Composite Armor - 01 October 1978

CTR10654J: Cutting, Machining, and Drilling of Composites - 01 October 1978

CTR10655J: Developing a Tapered Thickness Composite Flywheel Rotor - 01 October 1978

JTE10572J: Powder-Cushion Gripping to Promote Good Alignment in Tensile Testing - 01 September 1978

JTE10943J: Low Energy Impact Behavior of Composite Panels - 01 May 1978

JTE10918J: A New Method of Test for Flexural Fatigue of Plastics - 01 January 1978

JTE10556J: Delayed Yielding of a Plane Stress Viscoelastic Dugdale Model - 01 November 1977

JTE10544J: A Comparison of Methods for Determining the Shear Properties of Glass/Resin Unidirectional Composites - 01 September 1977

JTE10547J: Fatigue Damage: Stiffness/Strength Comparisons for Composite Materials - 01 September 1977

JTE10548J: Nondestructive Evaluation of Strength Degradation in Glass-Reinforced Plastics as a Result of Environmental Effects - 01 September 1977

JTE10549J: Standards for In-Vitro and In-Vivo Comparison and Qualification of Bioabsorbable Polymers - 01 September 1977

JTE11664J: A New Static Compression Fixture for Advanced Composite Materials - 01 July 1977

JTE11670J: The Effect of Hygrothermal History on Residual Strength of Glass Fiber Reinforced Plastic Laminates - 01 July 1977

JTE11637J: Static and Impact Properties of Laminated Hybrid Composites - 01 May 1977

JTE10666J: Comparison of Lap Shear Test Specimens - 01 March 1977

JTE10671J: Static and Impact Behavior of Graphite/Epoxy Composite Laminates Containing Third-Phase Reinforcement Materials - 01 March 1977

JTE10537J: The Removal of Stearic Acid Monolayers from Glass with Organic Solvents - 01 January 1977

JTE10538J: Cleaning Borosilicate Glass for Biological Application - 01 January 1977

JTE11369J: Methods for Determining the Strength of Brittle Materials in Compressive Stress States - 01 November 1976

JTE10212J: Environmental Stress Cracking of Thermoplastics: A New Approach to Testing - 01 July 1976

JTE10205J: Characterization of Polymeric Materials by Dynamic Mechanical Properties - 01 May 1976

JTE10192J: Production and Economic Consequences When Machining Glass Ceramic - 01 March 1976

JTE10502J: Screening Test for Torsional Creep Performance of Plastics - 01 January 1976

JTE10514J: Machining Glass Ceramic in Dry and Wet Environments - 01 January 1976

JTE11697J: A Comparison of the Elevated Temperature Strength Loss in High Tensile Strength Graphite/Epoxy Composite Laminates Due to Ambient and Accelerated Aging - 01 November 1975

JTE11700J: Tensile Creep of Angle-Plied Boron/Epoxy Laminates - 01 November 1975

JTE10177J: New Model Material for Three-Dimensional Stress Analysis - 01 September 1975

JTE10174J: Polymeric Materials for Concrete - 01 September 1975

JTE10660J: Mechanisms of Acceleration by Calcium Chloride: A Review - 01 July 1975

JTE10661J: Tricalcium Silicate Hydration in the Presence of Various Salts - 01 July 1975

JTE10662J: Effect of Various Accelerating Chemical Admixtures on Setting and Strength Development of Concrete - 01 July 1975

JTE10150J: The Measurement of the Coefficient of Friction of Polymer Pellets Under Extruder Conditions - 01 March 1975

JTE11680J: Comparison of Static and Dynamic Mechanical Properties of Some Epoxy-Matrix Composites - 01 November 1974

JTE11683J: The Application of the Single-Edge Notched Beam to Fracture Toughness Testing of Ceramics - 01 November 1974

JTE10119J: Fracture of Rocket Grain Models Subjected to Cooldown: A Study of Temperature-Initiated Fractures of Two-Dimensional Rocket Grain Models - 01 September 1974

JTE10094J: Strain Measurement Techniques for Fiber Modulus Determination - 01 May 1974

JTE10084J: Some Mechanical Properties of Sintered Fiber Metal Composites - 01 March 1974

JTE10085J: Contamination Control in the Production of High-Purity Chemicals - 01 March 1974

JTE10052J: Thermomechanical Testing of Plastics for Environmental Resistance - 01 November 1973

JTE11541J: Specimen Geometry Effects on the Strength of Unidirectional Resin-Matrix Composites - 01 November 1973

JTE10035J: Flow Test for Determination of Set-Time of Powdered Coatings - 01 September 1973

JTE10006J: Evaluation of Composite Failures through Fracture Signal Analysis - 01 May 1973

JTE10012J: Work of Fracture and Fracture Toughness of Graphite - 01 May 1973

JTE10888J: Determination of Mechanical Design Properties of Materials - 01 March 1973