All Automotive Journal Papers

Search within Automotive


JTE20180030: Testing and Evaluation of Linear Shear Mode Magnetorheological (MR) Damper Based on Rheological Properties of MR Fluid - 01 September 2020

JTE20180306: Testing and Evaluation of Performance and Emissions Characteristics of Water- Biodiesel Aspirated Research Engine - 01 September 2020

JTE20170131: Research on Random Load Characteristic Based on Mixture Distribution Model - 01 January 2019

JTE20170246: Production of Garcinia gummi-gutta Methyl Ester (GGME) as a Potential Alternative Feedstock for Existing Unmodified DI Diesel Engine: Combustion, Performance, and Emission Characteristics - 01 November 2018

JTE20160333: Novel Spring-Loaded Wear Test Rig to Test the Material Life of Probes Used in the Ingenious Six-Window Gauging System - 01 September 2018

JTE20170056: Performance, Combustion and Emission Characteristics of CI Engine Fueled with Sweet Lime Peel Oil (Citrus Limetta) - 01 September 2018

MPC20180006: Retraction - 07 May 2018

JTE20160296: Research on Load-Spectrum Construction of Automobile Key Parts Based on Monte Carlo Sampling - 01 May 2018

JTE20170014: Photocatalytic Activity of N-Doped TiO2 to Vehicle Exhaust in Road Tunnel - 01 May 2018

JTE20160538: Vibration Levels in Vans as a Function of Payload and Leaf Spring Sheet Number - 01 January 2018

JTE20170201: Research on Load Spectrum Construction of Bench Test Based on Automotive Proving Ground - 01 January 2018

JTE20160053: Investigation into the Flow-Blocking Ability of a Novel Magneto-Rheological Damper Unit - 01 September 2017

JTE20150475: Development of Standard Fatigue Vehicle Force Models Based on Actual Traffic Data by Weigh-In-Motion System - 01 May 2017

JTE20150335: Strength and Fracture Characterization of a Novel Polyurethane Adhesive for the Automotive Industry - 01 March 2017

MPC20160019: Experimental Validation of a Mixed-Lubrication Regime Model for Textured Piston-Ring-Liner Contacts - 30 January 2017

MPC20160027: Maskless Electrochemical Texturing of Automotive Cylinders - 30 January 2017

JTE20140378: Experimental Investigation of Bending Fatigue Life of Driving Pinion Tooth of Hypoid Bevels - 01 November 2016

JTE20150161: Performance Optimization of Vehicle Handling and Stability Using Multiple Surrogate Models - 01 November 2016

JTE20140092: Development of a Program-Loading Spectrum for the Accelerated Durability Test of Lower Control Arm - 01 May 2016

JTE20150147: Calculation Method and Influence Law of Pavement Rut Under Dynamic Load - 01 March 2016

JTE20150235: Tire–Pavement Contact Stress With 3D Finite-Element Model—Part 2: All-Steel Tire on Heavy Vehicles - 01 March 2016

JTE20140479: Durability Testing Method of a Hub-Reducer System Based on the Shanghai Standard Road Driving Cycle - 01 January 2016

JTE20140403: Reliability Analysis and Evaluation of Key Parts for Automobiles on the Basis of Dimensional Changes During High-Speed Operation - 01 November 2015

JTE20140133: Mechanics Performance of a Novel Magneto-Rheological Fluid Damper. - 01 September 2015

JTE20120098: Measuring Stress Fields in Connecting Rods Using Laser Interferometry (ESPI) - 01 July 2015

JTE20130317: Engine Cylinder Head Temperature Measurement Based on Optical Fiber Probe - 01 July 2015

JTE20130287: Experimental Analysis of the Influence of Toe Angle in Relation to Tire Pressure in the Measurement of Brake Forces at Spanish Ministry of Transport Test Facilities - 01 May 2015

JTE20130063: Evaluation of the Use of Ribbed Tires for the Characterization of Skid Resistance Using Friction Models - 01 November 2014

MPC20130099: Flow Optimization of Gas Quenching Processes Using Perforated Plates - 12 August 2014

JTE20130153: Impact of Using a Novel Emotional Intelligent Controller for Induction Motor Speed Control - 01 May 2014

MPC20130006: Prediction of Mechanical Properties of Nano-Composites Using Vibration Modal Analysis: Application to Aluminum Piston Alloys - 13 December 2013

MPC20130009: Performance and Characterization of TWIP Steels for Automotive Applications - 23 August 2013

JTE20120215: Accelerated Slam Testing of Vehicle Door Plate Module Using Vibration Exciter - 01 July 2013

JTE20120129: Interrelationship between Tire Contact Stress and Longitudinal Construction Joint Layout in Pavement - 01 December 2012

JTE20120145: Study of Expressway Axle Load Spectrum Based on Toll Data of Jinghu Expressway - 01 December 2012

MPC104382: Modeling of Distortion during Casting and Machining of Aluminum Engine Blocks With Cast-in Gray Iron Liners - 01 September 2012

JTE104559: Comparative Analysis of Brake Data of Vehicles on Two Different Ministry of Transport Brake Roller Testers - 01 July 2012

JAI104424: Reduction of Emission in a Diesel Engine Using Nanofuel – Ceria Nanoparticle Dispersed Diesel - 01 May 2012

JAI103442: The Use of Linear Sweep Voltammetry in Condition Monitoring of Diesel Engine Oil - 01 July 2011

JAI103368: Polyalkylene Glycols as Next Generation Engine Oils - 01 June 2011

JTE103135: Developing a New Foresight Model for Future Technology Evaluation in Electric Vehicle Industry - 01 March 2011

JAI103068: Vehicle Emissions and Fuel Economy Effects of 16 % Butanol and Various Ethanol Blended Fuels (E10, E20, and E85) - 01 February 2011

JAI103378: Forced Convective Boiling of Ethylene Glycol/Water Mixtures Inside a Small Tube - 01 February 2011

JTE101836: High Speed Weigh-in-Motion Calibration Practices - 01 September 2010

JAI102414: Experimental Investigations of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine—Part 1: Performance, Emission, and Combustion Characteristics - 01 June 2010

JAI102415: Experimental Investigation of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine—Part 2: Engine Durability and Effect on Lubricating Oil - 01 February 2010

JTE102054: Laboratory Measurement of the Actual Tire-Pavement Contact Pressure Using a Static Test Device - 01 January 2010

JAI101868: The Analysis and Control of Distortion in Carbonitrided and Nitrocarburized Thin-Shelled Plain Carbon Steel Automotive Powertrain Components - 01 March 2009

JAI101796: Prediction of Distortion of Automotive Pinion Gears during Quenching Using CFD and FEA - 01 January 2009

JTE101723: Field Verification of Smoothness Requirements for Weigh-in-Motion Approaches - 01 January 2009

JTE101471: A Simple and Effective Laboratory Test Device for Measuring Tire-Pavement Contact Pressure - 01 July 2008

JTE101172: Field Evaluation of Tire-Road Noise Using a New Close Proximity Method - 01 January 2008

JAI100894: Viscometric Temperature Sensitivity of Engine Lubricants at Low Temperature and Moderately High Shear Conditions - 01 November 2007

JAI100898: No/Low SAP and Alternative Engine Oil Development and Testing - 01 November 2007

JAI100916: ROBO—A Bench Procedure to Replace Sequence IIIGA Engine Test - 01 November 2007

JAI100926: Mechanochemical Additive-Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces - 01 November 2007

JAI100956: Design of Functionalized PAMA Viscosity Modifiers to Reduce Friction and Wear in Lubricating Oils - 01 November 2007

JAI100686: Heavy-Duty Diesel Engine Cavitation Test - 01 September 2007

JAI100912: Synergistic Tribological Performances of Borate Additive in Lubricants - 01 September 2007

JAI100938: Validation of Oxidative Stability of Factory Fill and Alternative Engine Oils Using the Iron Catalyzed Oxidation Test - 01 September 2007

JAI100849: A Review of Engine Oil Oxidation Bench Tests and Their Application in the Screening of New Antioxidant Systems for Low Phosphorus Engine Oils - 01 July 2007

JAI100937: Study of the ZDDP Antiwear Tribofilm Formed on the DLC Coating Using AFM and XPS Techniques - 01 July 2007

JAI100368: Coolant Development in Asia - 01 June 2007

JAI100366: Accelerated Oxidation and Corrosion Testing of Engine Coolants Using a Rotary Pressure Vessel Oxidation Test - 00 April 2007

JAI100634: Comparison of Bench Test Methods to Evaluate Heavy Duty Coolant Thermal Stability - 00 April 2007

JAI100941: Additive and Base Oil Effects in Automatic Particle Counters - 00 April 2007

JAI100521: Compatibility Testing of Multi-Vehicle Coolant Chemistries - 00 March 2007

JAI100615: A Comparison of Membrane Technologies for Engine Coolant Recycling - 00 March 2007

JAI100367: Cavitation Protection Performance of Nitrite-Free Organic Acid Based Coolant for Heavy-Duty Engines - 00 February 2007

JAI100510: Field Test for Carboxylate Inhibitor Levels in OAT Coolants - 00 February 2007

JAI100616: Component Durability and High Mileage Performance of a Full Carboxylate Coolant in Heavy Duty Diesel (HDD) Engines - 00 February 2007

JAI100336: Heavy Duty Diesel Engine Coolant Technology: Past, Present, and Future - 01 January 2007

JAI100421: Investigation of Interaction Between Coolant Formulations and Flux Loading/Compositions in Controlled Atmosphere Brazed (CAB) Aluminum Surfaces in Heat Exchanger Applications - 01 January 2007

JAI100502: New Electrochemical Methods for the Evaluation of Localized Corrosion in Engine Coolants - 01 January 2007

JAI100325: Coolants at Elevated Temperatures - 01 November 2006

JAI100505: Effect of Fluoride on Corrosion of Cooling System Metals in Ethylene Glycol-Based Antifreeze/Coolants - 01 November 2006

JTE100039: Durability Test Analysis in a Passenger Vehicle Damper Spring Tower - 01 November 2006

JTE14254: Hydrophilic Characterization of Automotive Brake Fluid - 01 September 2006

JAI13884: Tribological Behavior and Corrosion Resistance of Kolsterized AISI316L Austenitic Stainless Steel: Existing Applications in the Automotive Industry - 01 February 2006

JAI12975: Latest Improvements on Using Polarized X-Ray Excitation EDXRF for the Analysis of Low Sulfur Content in Automotive Fuel - 01 October 2005

JTE11979: A Methodology for Fuel Tank Durability Test Development - 01 March 2005

JTE12641: Influence of Pavement Surface Type on Tire/Pavement Generated Noise - 01 March 2005

JAI19035: Validation of Complex Wheel/Hub Subassemblies by Multiaxial Laboratory Tests Using Standardized Load Files - 01 November 2004

JAI11602: Developing a Performance-Based Joint Sealant Specification for Airport PCC Pavements - 01 July 2004

JTE12325J: Retrieval and Interpretation of Crash-Related Data from Nonresponsive Electronic Control Units in Land Vehicle Systems - 01 July 2002

JTE12031J: Thermal Diagnostic Method for Vehicle Brakes - 01 September 1998

JTE11363J: An Ultrasonic Technique for Monitoring Automotive Components - 01 September 1997

JTE11478J: Relationship Between Statistical Distributions of Traffic Loads and Pavement Responses - 01 March 1997

JTE11479J: Calibration of Weigh-in-Motion Systems Through Dynamic Vehicle Simulation - 01 March 1997

JTE11480J: Evaluation of Overhead and In-Ground Vehicle Detector Technologies for Traffic Flow Measurement - 01 March 1997

JTE11287J: Evolution of the Internal Quality Audit at Ford Motor Company's Central Laboratory - 01 January 1996

JTE11405J: Durability Design Process of a Vehicle Suspension Component - 01 September 1995

JTE10430J: Characterizing Shock Absorbers for Ground Vehicle Simulation - 01 July 1995

JTE12629J: A Computer Method of Analysis for Tire Wear Characterization, Identification, and Classification - 01 January 1994

CTR10204J: Polymer Composite Characterization for Automotive Structural Applications - 01 December 1990

JTE11109J: Cetane Number of Small Samples by Engine Throttling: Reliability Comparison with Standard Cooperative Fuels Research Method - 01 May 1989

CTR10317J: Composite Standards Activities of the Society of Automotive Engineers - 01 March 1986

JTE10699J: Piston Ring Deposits When Using Vegetable Oil as a Fuel - 01 March 1984

JTE11521J: Evaluation of Assembly Stresses of Automotive Leaf Springs by Acoustic Emission - 01 September 1981

JTE11522J: Design of a Dynamic Gear Test Rig - 01 September 1981

JTE11696J: Characterization of Galvanized Sheet Steel for Automotive Vehicle Bodies - 01 November 1975

JTE11698J: Cumulative Fatigue Damage Analysis of a Light Truck Frame - 01 November 1975