All Quality Standards

Search within Quality


A1062-10(2015): Standard Specification for Steel Castings Sampling

A34/A34M-06(2012): Standard Practice for Sampling and Procurement Testing of Magnetic Materials

A610-79(2014): Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

A673/A673M-07(2012): Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

ANS/ISO17025-05: General Requirements for the Competence of Testing and Calibration Laboratories

ANSI/ISO/IEC17011-05: Conformity assessmen—General requirements for accreditation bodies accrediting conformity assessment bodies

B215-15: Standard Practices for Sampling Metal Powders

B602-88(2016): Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings

B697-88(2016): Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings

B762-90(2016): Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings

B942-10(2015): Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations

B953-13: Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis

B982-14e1: Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis

C1009-13a: Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry

C1019-16: Standard Test Method for Sampling and Testing Grout

C1052-14: Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride

C1068-15: Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry

C1075-10: Standard Practices for Sampling Uranium-Ore Concentrate

C1077-17: Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

C1128-15: Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials

C1156-03(2011): Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials

C1210-12: Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry

C1215-92(2012)e1: Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry

C1264-14a: Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products

C1297-03(2011): Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials

C1385/C1385M-10: Standard Practice for Sampling Materials for Shotcrete

C140/C140M-17a: Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

C1586-05(2011): Standard Guide for Quality Assurance of Mortars

C1689-08a(2014): Standard Practice for Subsampling of Uranium Hexafluoride

C1703-08(2013): Standard Practice for Sampling of Gaseous Uranium Hexafluoride

C1704/C1704M-09a(2016): Standard Test Method for Sampling and Testing Structural Cementitious Panels

C1751-11: Standard Guide for Sampling Radioactive Tank Waste

C224-78(2014): Standard Practice for Sampling Glass Containers

C311/C311M-17: Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

C322-09(2014): Standard Practice for Sampling Ceramic Whiteware Clays

C50/C50M-13: Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

C67-17: Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

C670-15: Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

C802-14: Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

C998-17: Standard Practice for Sampling Surface Soil for Radionuclides

C999-17: Standard Practice for Soil Sample Preparation for the Determination of Radionuclides

D1045-14: Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

D1066-11: Standard Practice for Sampling Steam

D1125-14: Standard Test Methods for Electrical Conductivity and Resistivity of Water

D117-10: Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin

D1176-14: Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes

D121-15: Standard Terminology of Coal and Coke

D1234-13: Standard Test Method of Sampling and Testing Staple Length of Grease Wool

D1245-17: Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy

D1265-11(2017)e1: Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

D1291-17: Standard Practice for Estimation of Chlorine Demand of Water

D1293-12: Standard Test Methods for pH of Water

D1356-15b: Standard Terminology Relating to Sampling and Analysis of Atmospheres

D1385-07(2013)e1: Standard Test Method for Hydrazine in Water

D140/D140M-16: Standard Practice for Sampling Asphalt Materials

D1441-12: Standard Practice for Sampling Cotton Fibers for Testing

D146/D146M-04(2012)e1: Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

D1485-07(2015): Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation

D1498-14: Standard Test Method for Oxidation-Reduction Potential of Water

D1568-05(2014): Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates

D1570-95(2016): Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates

D1586-11: Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

D1677-02(2011): Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation

D1799-03a(2014): Standard Practice for Carbon Black—Sampling Packaged Shipments

D1900-06(2015): Standard Practice for Carbon Black—Sampling Bulk Shipments

D1914-95(2014): Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres

D197-87(2012): Standard Test Method for Sampling and Fineness Test of Pulverized Coal

D2013/D2013M-12: Standard Practice for Preparing Coal Samples for Analysis

D202-17: Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation

D2022-89(2016): Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches

D2035-13: Standard Practice for Coagulation-Flocculation Jar Test of Water

D2113-14: Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration

D2234/D2234M-17: Standard Practice for Collection of a Gross Sample of Coal

D2276-06(2014): Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

D228/D228M-16: Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

D233-13: Standard Test Methods of Sampling and Testing Turpentine

D2331-08(2013): Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits

D2332-13: Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence

D2525-13: Standard Practice for Sampling Wool for Moisture

D2590/D2590M-98(2011)e1: Standard Test Method for Sampling Chrysotile Asbestos

D2687-95(2016): Standard Practices for Sampling Particulate Ion-Exchange Materials

D2688-15e1: Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)

D2759-00(2017): Standard Practice for Sampling Gas from a Transformer Under Positive Pressure

D2777-13: Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water

D2791-13: Standard Test Method for On-line Determination of Sodium in Water

D2797/D2797M-11a: Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light

D2813-03(2013): Standard Practice for Sampling Leather for Physical and Chemical Tests

D2829-07(2013): Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems

D2915-17: Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products

D2944-14: Standard Practice of Sampling Processed Peat Materials

D3195/D3195M-10(2015): Standard Practice for Rotameter Calibration

D3213-13: Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

D3244-16: Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

D3325-90(2013): Standard Practice for Preservation of Waterborne Oil Samples

D3326-07(2011): Standard Practice for Preparation of Samples for Identification of Waterborne Oils

D3333-07(2012): Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing

D3370-10: Standard Practices for Sampling Water from Closed Conduits

D3376-14: Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

D3394-16: Standard Test Methods for Sampling and Testing Electrical Insulating Board

D3437-15: Standard Practice for Sampling and Handling Liquid Cyclic Products

D3438-15: Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride

D345-02(2010): Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications

D346/D346M-11: Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis

D3483-14: Standard Test Methods for Accumulated Deposition in a Steam Generator Tube

D3609-00(2014): Standard Practice for Calibration Techniques Using Permeation Tubes

D3614-07(2013): Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions

D3636-13ae1: Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials

D3665-12(2017): Standard Practice for Random Sampling of Construction Materials

D3666-16: Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

D3670-91(2014): Standard Guide for Determination of Precision and Bias of Methods of Committee D22

D3686-13: Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)

D3687-07(2012): Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method

D3715/D3715M-98(2011): Standard Practice for Quality Assurance of Pressure-Sensitive Tapes

D3740-12a: Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

D3843-16: Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities

D3852-16: Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid

D3856-11(2015): Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water

D3864-12: Standard Guide for On-Line Monitoring Systems for Water Analysis

D3896-07(2016): Standard Practice for Rubber From Synthetic Sources—Sampling

D3925-02(2015): Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings

D3997/D3997M-16: Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light

D4054-16: Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

D4057-12: Standard Practice for Manual Sampling of Petroleum and Petroleum Products

D4131-84(2014): Standard Practice for Sampling Fish with Rotenone

D4132-82(2012): Standard Practice for Sampling Phytoplankton with Conical Tow Nets

D4133-82(2012): Standard Practice for Sampling Phytoplankton with Pumps

D4134-82(2012): Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler

D4135-82(2012): Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers

D4136-82(2012): Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles

D4137-82(2012): Standard Practice for Preserving Phytoplankton Samples

D4149-82(2012): Standard Classification for Sampling Phytoplankton in Surface Waters

D4177-16e1: Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

D4185-17: Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry

D4188-13: Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water

D4211-82(2012): Classification for Fish Sampling

D4228-05(2017): Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

D4296-83(2015)e1: Standard Practice for Sampling Pitch

D4297-15: Standard Practice for Sampling and Handling Bisphenol A(4,4 -Isopropylidinediphenol)

D4298-04(2014)e1: Standard Guide for Intercomparing Permeation Tubes to Establish Traceability

D4354-12: Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing

D4375-96(2011): Standard Practice for Basic Statistics in Committee D-19 on Water

D4411-03(2014)e1: Standard Guide for Sampling Fluvial Sediment in Motion

D4447-15: Standard Guide for Disposal of Laboratory Chemicals and Samples

D4448-01(2013): Standard Guide for Sampling Ground-Water Monitoring Wells

D4453-17: Standard Practice for Handling of High Purity Water Samples

D4460-97(2015): Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods

D4483-14a: Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

D4489-95(2011): Standard Practices for Sampling of Waterborne Oils

D4490-96(2016): Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes

D4517-15: Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy

D4519-16: Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity

D4532-15: Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers

D4537-12: Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities

D4547-15: Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds

D4561-11: Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

D4597-10(2015): Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers

D4599-14: Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters

D4600-95(2016): Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres

D4638-16: Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis

D4687-14: Standard Guide for General Planning of Waste Sampling

D4698-92(2013): Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals

D4700-15: Standard Guide for Soil Sampling from the Vadose Zone

D4759-11: Standard Practice for Determining the Specification Conformance of Geosynthetics

D4765-13: Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes

D4766-98(2014): Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)

D4778-15: Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

D480-88(2014): Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes

D4821-16: Standard Guide for Carbon Black—Validation of Test Method Precision and Bias

D4823-95(2014): Standard Guide for Core Sampling Submerged, Unconsolidated Sediments

D4840-99(2010): Standard Guide for Sampling Chain-of-Custody Procedures

D4841-88(2013)e1: Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents

D4844-16: Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection

D4856-11(2016): Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)

D4913-00(2016): Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors

D501-03(2016): Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents

D5013-16: Standard Practices for Sampling Wastes from Pipes and Other Point Discharges

D5063-90(2012): Standard Guide for Use of Certification of Coating Conformance Form

D5074-90(2014): Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures

D509-15: Standard Test Methods of Sampling and Grading Rosin

D5128-14: Standard Test Method for On-Line pH Measurement of Water of Low Conductivity

D5147/D5147M-14: Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

D5163-16: Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants

D5172-91(2015): Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water

D5173-15: Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide

D5255-15: Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

D5256-14: Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits

D5283-92(2009): Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation

D5287-08(2015): Standard Practice for Automatic Sampling of Gaseous Fuels

D5337-11(2016): Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps

D5358-93(2014): Standard Practice for Sampling with a Dipper or Pond Sampler

D5361/D5361M-16: Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing

D5367-16: Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

D5391-14: Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample

D5406-93(2016): Standard Practice for Rubber—Calculation of Producer's Process Performance Indexes

D5451-93(2016): Standard Practice for Sampling Using a Trier Sampler

D5462-13: Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water

D5464-16: Standard Test Method for pH Measurement of Water of Low Conductivity

D5495-03(2016): Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)

D5498-12a: Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities

D5536-17: Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties

D5540-13: Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis

D5542-16: Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography

D5543-15: Standard Test Method for Low-Level Dissolved Oxygen in Water

D5544-16: Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water

D5578-04(2015): Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)

D5612-94(2013): Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program

D5633-04(2016): Standard Practice for Sampling with a Scoop

D5658-13: Standard Practice for Sampling Unconsolidated Waste From Trucks

D5671-95(2011): Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light

D5679-16: Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers

D5680-14: Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers

D5702-07(2012): Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

D5743-97(2013): Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers

D5755-09(2014)e1: Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading

D5792-10(2015): Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives

D5810-96(2015): Standard Guide for Spiking into Aqueous Samples 

D5817-03a(2014): Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing

D5818-11: Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics

D5836-08(2013): Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)

D5842-17: Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

D5847-02(2012): Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis

D5851-95(2015): Standard Guide for Planning and Implementing a Water Monitoring Program

D5905-98(2013): Standard Practice for the Preparation of Substitute Wastewater

D5932-08(2013)e1: Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace

D5952-08(2015): Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)

D5956-15: Standard Guide for Sampling Strategies for Heterogeneous Wastes

D596-01(2011): Standard Guide for Reporting Results of Analysis of Water

D5971/D5971M-16: Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material

D5996-16: Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography

D5997-15: Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

D6009-12: Standard Guide for Sampling Waste Piles

D6044-96(2015): Standard Guide for Representative Sampling for Management of Waste and Contaminated Media

D6051-15: Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities

D6056-96(2011): Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

D6057-96(2011): Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy

D6058-96(2016): Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment

D6059-96(2011): Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

D6061-01(2012)e1: Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers

D6062-07(2012): Standard Guide for Personal Samplers of Health-Related Aerosol Fractions

D6063-11: Standard Guide for Sampling of Drums and Similar Containers by Field Personnel

D6071-14: Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy

D6072/D6072M-09(2015): Standard Practice for Obtaining Samples of Geosynthetic Clay Liners

D6085-97(2016): Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts

D6091-07(2014): Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error

D6145-97(2012): Standard Guide for Monitoring Sediment in Watersheds

D6199-07(2012): Standard Practice for Quality of Wood Members of Containers and Pallets

D6206-09(2015): Standard Practice for Sampling of Coating Films

D6232-16: Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities

D6246-08(2013)e1: Standard Practice for Evaluating the Performance of Diffusive Samplers

D6250-98(2009): Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions

D6259-15: Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method

D6281-15: Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)

D6299-17: Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

D6300-17a: Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

D6301-13: Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water

D6311-98(2014): Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design

D6317-15: Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

D6323-12e1: Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities

D6329-98(2015): Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers

D6350-14: Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

D6353-06(2017)e1: Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

D6354-12: Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

D6362-98(2013): Standard Practice for Certificates of Reference Materials for Water Analysis

D6404-99(2014): Standard Practice for Sampling Vegetable Materials Containing Tannin

D6418-09: Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis

D6480-05(2010): Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy

D6494-99(2015): Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction

D6502-10(2015): Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)

D6504-11(2016)e1: Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water

D6512-07(2014): Standard Practice for Interlaboratory Quantitation Estimate

D6519-15: Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler

D6538-12: Standard Guide for Sampling Wastewater With Automatic Samplers

D6543-17: Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers

D6552-06(2016): Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols

D6561-06(2016): Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace

D6562-12: Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace

D6568-00(2011): Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples

D6569-14: Standard Test Method for On-Line Measurement of pH

D6600-00(2013): Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods

D6602-13: Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

D6607-00(2015): Standard Practice for Inclusion of Precision Statement Variation in Specification Limits

D6609-17: Standard Guide for Part-Stream Sampling of Coal

D6617-17: Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

D6620-06(2010): Standard Practice for Asbestos Detection Limit Based on Counts

D6631-05(2015): Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

D6640-01(2015): Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

D6659-16: Standard Practice for Sampling and Preparation of Wet Blue and Wet White for Physical and Chemical Tests

D6661-10: Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling

D6689-01(2011): Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

D6698-14: Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water

D6699-16: Standard Practice for Sampling Liquids Using Bailers

D6708-16b: Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

D6715-13: Standard Practice for Sampling and Preparation of Fresh or Salt-Preserved (Cured) Hides and Skins for Chemical and Physical Tests

D6759-16: Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers

D6785-13: Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry

D6792-17: Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories

D6796-16: Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies

D6800-12: Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals

D6808-02(2012): Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis

D6809-02(2016): Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials

D6832-13e1: Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide

D6850-13: Standard Guide for QC of Screening Methods in Water

D6877-13e1: Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace

D6883-17: Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles

D6907-05(2016): Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers

D6956-17: Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use

D6966-13: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

D6982-09(2016): Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns

D7015-13: Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils

D7026-13: Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis

D7035-16: Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7048-16: Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

D7049-17: Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres

D7050-04(2014): Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties

D7108-12: Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist

D7119/D7119M-13a: Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing

D7126-15: Standard Test Method for On-Line Colorimetric Measurement of Silica

D7144-05a(2016): Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination

D7167-12: Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant

D7186-14: Standard Practice for Quality Assurance Observation of Roof Construction and Repair

D7200-12: Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy

D7201-06(2011): Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)

D7202-15: Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection

D7204-15: Standard Practice for Sampling Waste Streams on Conveyors

D7273/D7273M-08(2013)e1: Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites

D7282-14: Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements

D7294-13: Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest

D7296-12: Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds

D7307-06(2016): Standard Practice for Sampling of Thermoplastic Traffic Marking Materials

D7353-07(2013): Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump

D7365-09a(2015): Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide

D7366-08(2013): Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods

D7372-17: Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

D7390-07(2012): Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments

D7391-17e1: Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy

D7430-16be1: Standard Practice for Mechanical Sampling of Coal

D7439-14: Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

D7440-08(2015)e1: Standard Practice for Characterizing Uncertainty in Air Quality Measurements

D7441-08(2013): Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples

D7448-16: Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke

D7453-09(2015): Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation

D7464-14: Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

D7482-17: Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

D7495-12: Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials

D75/D75M-14: Standard Practice for Sampling Aggregates

D7510-10(2016)e1: Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water

D7521-16: Standard Test Method for Determination of Asbestos in Soil

D7557/D7557M-09(2013)e1: Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens

D7606-11: Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases

D7636/D7636M-11: Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems

D7650-13: Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter

D7659-10(2015): Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection

D7677-16: Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water

D7707-11(2016): Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust

D7712-11e1: Standard Terminology for Sampling and Analysis of Asbestos

D7725-12: Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)

D7729-12: Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software

D7773-12: Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography

D7778-15: Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

D7782-13: Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data

D7783-13: Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data

D7822-13: Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids

D7831-13: Standard Practice for Sampling of Tanks by Field Personnel

D801-02(2013): Standard Test Methods for Sampling and Testing Dipentene

D802-02(2013): Standard Test Methods for Sampling and Testing Pine Oils

D807-14: Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)

D887-13: Standard Practices for Sampling Water-Formed Deposits

D923-15: Standard Practices for Sampling Electrical Insulating Liquids

D933-84(2012): Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits

D934-13: Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction

D979/D979M-15: Standard Practice for Sampling Bituminous Paving Mixtures

E105-16: Standard Practice for Probability Sampling of Materials

E1157-87(2011): Standard Specification for Sampling and Testing of Reusable Laboratory Glassware

E1169-14: Standard Practice for Conducting Ruggedness Tests

E1198-87(2012): Standard Practice for Sampling Zooplankton with Pumps

E1199-87(2012): Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler

E1201-87(2012): Standard Practice for Sampling Zooplankton with Conical Tow Nets

E1212-17: Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies

E1216-11(2016): Standard Practice for Sampling for Particulate Contamination by Tape Lift

E122-17: Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

E1282-11(2016): Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

E1306-17: Standard Practice for Preparation of Metal and Alloy Samples for Chemical Analysis by Electric Arc Remelting

E1323-15: Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data

E1325-16: Standard Terminology Relating to Design of Experiments

E1329-10: Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis

E1346-16: Standard Practice for Bulk Sampling, Handling, and Preparing Edible Vegetable Oils for Sensory Evaluation

E1359-17: Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies

E1368-14: Standard Practice for Visual Inspection of Asbestos Abatement Projects

E1370-14: Standard Guide for Air Sampling Strategies for Worker and Workplace Protection

E1388-17: Standard Practice for Static Headspace Sampling of Vapors from Fire Debris Samples

E1402-13: Standard Guide for Sampling Design

E141-10: Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

E1488-12e1: Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods

E1494-12: Standard Practice for Encapsulation Testing of Friable Asbestos-Containing Surfacing Materials

E1601-12: Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

E1655-05(2012): Standard Practices for Infrared Multivariate Quantitative Analysis

E1675-04(2012): Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis

E1746-17a: Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities

E177-14: Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

E178-16a: Standard Practice for Dealing With Outlying Observations

E1790-04(2016)e1: Standard Practice for Near Infrared Qualitative Analysis

E1806-09(2016): Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

E1817-08(2014): Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

E1833-07a(2013)e1: Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition

E1847-96(2013): Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines

E1916-11: Standard Guide for Identification of Mixed Lots of Metals

E1950-10: Standard Practice for Reporting Results from Methods of Chemical Analysis

E1970-16: Standard Practice for Statistical Treatment of Thermoanalytical Data

E1994-09(2013): Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans

E2027-09: Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

E2031-99(2016): Standard Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations

E2056-04(2016): Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures

E2093-12(2016): Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

E2107-06(2014): Standard Practice for Environmental Regulatory Compliance Audits

E2117-06(2011): Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription

E2144-11(2016): Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres

E2159-15: Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts

E2234-09(2013): Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL

E2281-15: Standard Practice for Process Capability and Performance Measurement

E2282-14: Standard Guide for Defining the Test Result of a Test Method

E2327-15e1: Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis

E2334-09(2013)e2: Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample

E2365-14: Standard Guide for Environmental Compliance Performance Assessment

E2480-12: Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands

E2489-16: Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

E2536-15a: Standard Guide for Assessment of Measurement Uncertainty in Fire Tests

E2537-16: Standard Guide for Application of Continuous Process Verification to Pharmaceutical and Biopharmaceutical Manufacturing

E255-07(2014): Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

E2554-13: Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques

E2555-07(2012): Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection

E2586-16: Standard Practice for Calculating and Using Basic Statistics

E2587-16: Standard Practice for Use of Control Charts in Statistical Process Control

E2617-10: Standard Practice for Validation of Empirically Derived Multivariate Calibrations

E2655-14: Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods

E2659-17: Standard Practice for Certificate Programs

E2696-09(2013): Standard Practice for Life and Reliability Testing Based on the Exponential Distribution

E2708-17: Standard Terminology for Accreditation and Certification

E2709-14e1: Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure

E2762-10(2014): Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL

E2764-11: Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis

E2782-17: Standard Guide for Measurement Systems Analysis (MSA)

E2819-11(2015): Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL

E2833-12: Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection

E2849-13: Standard Practice for Professional Certification Performance Testing

E2857-11(2016): Standard Guide for Validating Analytical Methods

E2862-12: Standard Practice for Probability of Detection Analysis for Hit/Miss Data

E2867-14: Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry

E2870-13: Standard Test Method for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the Palmar Surface and Mechanical Hand Sampling

E2891-13: Standard Guide for Multivariate Data Analysis in Pharmaceutical Development and Manufacturing Applications

E29-13: Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E2910-12: Standard Guide for Preferred Methods for Acceptance of Product

E2935-16: Standard Practice for Conducting Equivalence Testing in Laboratory Applications

E300-03(2017): Standard Practice for Sampling Industrial Chemicals

E32-15: Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition

E329-14a: Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

E456-13A(2017)e1: Standard Terminology Relating to Quality and Statistics

E541-10: Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building

E543-15: Standard Specification for Agencies Performing Nondestructive Testing

E55-11(2017): Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

E634-12: Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry

E691-16: Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

E699-16: Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components

E716-16: Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry

E739-10(2015): Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data

E775-15: Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel

E777-17: Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel

E778-15: Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples

E790-15: Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples

E826-14: Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry

E877-13: Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties

E88-11(2017): Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition

E882-10(2016)e1: Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory

E884-82(2012): Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities

E947-83(2015): Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis

E976-15: Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

E999-15: Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing

F1057-17: Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

F1064-11(2016): Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications

F1084-08(2013): Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment

F1193-17: Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

F1229-01(2016): Standard Guide for Qualification and Training of EMS Air Medical Patient Care Providers

F1469-11: Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

F1470-12: Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

F1503-02(2012): Standard Practice for Machine/Process Capability Study Procedure

F1651-95(2009): Standard Guide for Training the Emergency Medical Technician (Paramedic)

F1654-95(2012): Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment

F1655-95(2013): Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings

F1940-07a(2014): Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

F2016-00(2012): Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings

F2242-05(2013): Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft

F2275-10(2014): Standard Practice for Treestand Manufacturer Quality Assurance Program

F2282-15: Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

F2356-05a(2013): Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft

F2447-05(2009): Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft

F2575-14: Standard Guide for Quality Assurance in Translation

F2717-14: Standard Guide for Development of an Independent Third-Party Verification of Reference Materials

F2774-09(2014): Standard Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material

F2839-11(2016): Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft

F2889-11: Standard Practice for Assessing Language Proficiency

F2930-16: Standard Guide for Compliance with Light Sport Aircraft Standards

F2948-13: Standard Guide to Walkway Auditor Qualifications

F2962-13: Standard Practice for Conformity Assessment of Protective Clothing Worn by Operators Applying Pesticides

F2972-15: Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System

F3003-14: Standard Specification for Quality Assurance of a Small Unmanned Aircraft System (sUAS)

F302-09(2015): Standard Practice for Field Sampling of Aerospace Fluids in Containers

F303-08(2016): Standard Practices for Sampling for Particles in Aerospace Fluids and Components

F3035-13: Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft

F307-13: Standard Practice for Sampling Pressurized Gas for Gas Analysis

F309-04(2010): Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants

F310-07(2012): Standard Practice for Sampling Cryogenic Aerospace Fluids

F311-08(2013): Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters

F312-08(2016): Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters

F327-08(2015): Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method

F610/F610M-15: Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique

F940-99(2013): Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

G16-13: Standard Guide for Applying Statistics to Analysis of Corrosion Data

G166-00(2011): Standard Guide for Statistical Analysis of Service Life Data

G169-01(2013): Standard Guide for Application of Basic Statistical Methods to Weathering Tests

G172-02(2010)e1: Standard Guide for Statistical Analysis of Accelerated Service Life Data