All Oil & Gas Standards

Search within Oil & Gas


B837-10: Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

C1234-11(2016): Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

D1015-05(2015): Standard Test Method for Freezing Points of High-Purity Hydrocarbons

D1016-05(2015): Standard Test Method for Purity of Hydrocarbons from Freezing Points

D1018-11(2016): Standard Test Method for Hydrogen In Petroleum Fractions

D1025-10(2015)e1: Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene

D1070-03(2017): Standard Test Methods for Relative Density of Gaseous Fuels

D1071-17: Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples

D1072-06(2012): Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

D1091-11(2016): Standard Test Methods for Phosphorus in Lubricating Oils and Additives

D1092-12(2017): Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

D1093-11(2017): Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

D1094-07(2013): Standard Test Method for Water Reaction of Aviation Fuels

D1142-95(2012): Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature

D1157-91(2014): Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

D1159-07(2017): Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

D1160-15: Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

D117-10: Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin

D1187/D1187M-97(2011)e1: Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal

D1217-15: Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

D1218-12(2016): Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

D1227-13: Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

D1250-08(2013)e1: Standard Guide for Use of the Petroleum Measurement Tables

D1264-16: Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

D1265-11(2017)e1: Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

D1266-13: Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

D1267-12: Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

D127-08(2015): Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum

D128-98(2014)e1: Standard Test Methods for Analysis of Lubricating Grease

D129-13: Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

D1298-12b(2017): Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

D130-12: Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

D1318-16: Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

D1319-15: Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

D1321-16a: Standard Test Method for Needle Penetration of Petroleum Waxes

D1322-15e1: Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel

D1369-84(2012): Standard Practice for Quantities of Materials for Bituminous Surface Treatments

D1386-15: Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes

D1387-89(2012): Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes

D139-16: Standard Test Method for Float Test for Bituminous Materials

D140/D140M-16: Standard Practice for Sampling Asphalt Materials

D1401-12e1: Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

D1403-10: Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

D1404/D1404M-99(2014): Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

D1405/D1405M-08(2013): Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D1465-10(2015): Standard Test Method for Blocking and Picking Points of Petroleum Wax

D1478-11(2017)e1: Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

D1480-15: Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

D1481-17: Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer

D1500-12: Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

D1524-15: Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field

D1550-94(2015): Standard ASTM Butadiene Measurement Tables

D1552-16e1: Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

D156-15: Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

D1561/D1561M-13: Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor

D1655-17: Standard Specification for Aviation Turbine Fuels

D1657-12(2017): Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

D1662-08(2014): Standard Test Method for Active Sulfur in Cutting Oils

D1665-98(2014): Standard Test Method for Engler Specific Viscosity of Tar Products

D1742-06(2013): Standard Test Method for Oil Separation from Lubricating Grease During Storage

D1743-13: Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

D1747-09(2014): Standard Test Method for Refractive Index of Viscous Materials

D1748-10(2015): Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

D1754/D1754M-09(2014): Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

D1796-11(2016): Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

D1826-94(2017): Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

D1831-11: Standard Test Method for Roll Stability of Lubricating Grease

D1833-87(2017): Standard Test Method for Odor of Petroleum Wax

D1835-16: Standard Specification for Liquefied Petroleum (LP) Gases

D1838-16: Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

D1839-14: Standard Test Method for Amyl Nitrate in Diesel Fuels

D1840-07(2017): Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

D187-08(2013): Standard Test Method for Burning Quality of Kerosine

D189-06(2014): Standard Test Method for Conradson Carbon Residue of Petroleum Products

D1903-08(2017): Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels

D1945-14: Standard Test Method for Analysis of Natural Gas by Gas Chromatography

D1946-90(2015)e1: Standard Practice for Analysis of Reformed Gas by Gas Chromatography

D1988-06(2015): Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes

D20-03(2014): Standard Test Method for Distillation of Road Tars

D2001-07(2012): Standard Test Method for Depentanization of Gasoline and Naphthas

D2007-11(2016): Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

D2008-12: Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

D2026/D2026M-15: Standard Specification for Cutback Asphalt (Slow-Curing Type)

D2027/D2027M-13: Standard Specification for Cutback Asphalt (Medium-Curing Type)

D2028/D2028M-15: Standard Specification for Cutback Asphalt (Rapid-Curing Type)

D2042-15: Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

D2068-17: Standard Test Method for Determining Filter Blocking Tendency

D2070-16e1: Standard Test Method for Thermal Stability of Hydraulic Oils

D2140-08(2017): Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin

D2155-12: Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature

D2156-09(2013): Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

D2157-94(2013): Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels

D2158-16a: Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

D2161-17: Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

D2162-17: Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

D2163-14e1: Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

D217-17: Standard Test Methods for Cone Penetration of Lubricating Grease

D2170/D2170M-10: Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

D2171/D2171M-10: Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

D2226-93(2012): Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use

D2265-15: Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

D2266-01(2015): Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

D2268-93(2017): Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography

D2269-10(2015): Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

D2270-10(2016): Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C

D2272-14a: Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

D2273-08(2016): Standard Test Method for Trace Sediment in Lubricating Oils

D2274-14: Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

D2276-06(2014): Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

D228/D228M-16: Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

D2318-15: Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

D2319/D2319M-14e1: Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

D2320-98(2012): Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

D235-02(2012): Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

D2384-83(2014): Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

D2386-15e1: Standard Test Method for Freezing Point of Aviation Fuels

D2392-15: Standard Test Method for Color of Dyed Aviation Gasolines

D2397/D2397M-17: Standard Specification for Cationic Emulsified Asphalt

D2399-12(2017)e1: Standard Practice for Selection of Cutback Asphalts

D240-17: Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

D2415-15: Standard Test Method for Ash in Coal Tar and Pitch

D2416-84(2015)e1: Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

D242/D242M-09(2014): Standard Specification for Mineral Filler For Bituminous Paving Mixtures

D2420-13: Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

D2421-13: Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

D2422-97(2013): Standard Classification of Industrial Fluid Lubricants by Viscosity System

D2423-90(2017): Standard Test Method for Surface Wax on Waxed Paper or Paperboard

D2425-04(2009): Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

D2426-93(2014): Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

D2427-06(2015): Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography

D244-09(2017): Standard Test Methods and Practices for Emulsified Asphalts

D2493/D2493M-16: Standard Practice for Viscosity-Temperature Chart for Asphalt Binders

D2500-17: Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels

D2501-14: Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

D2502-14: Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements

D2503-92(2016): Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure

D2504-88(2015): Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography

D2505-88(2015): Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

D2509-14e1: Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

D2510-94(2012): Standard Test Method for Adhesion of Solid Film Lubricants

D2511-93(2014): Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

D2521/D2521M-76(2014)e1: Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining

D2532-17: Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

D2534-88(2017): Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings

D2549-02(2012): Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

D2593-93(2014): Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

D2595-17: Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

D2596-15: Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

D2598-16: Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

D2603-01(2013): Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

D2619-09(2014): Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

D2622-16: Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

D2624-15: Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

D2625-94(2015): Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

D2638-10(2015)e1: Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

D2649-04(2014): Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

D2650-10(2015): Standard Test Method for Chemical Composition of Gases by Mass Spectrometry

D2669-16: Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)

D2670-95(2016): Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

D2699-16e1: Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

D2700-16a: Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

D2709-16: Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

D2710-09(2013): Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

D2711-17: Standard Test Method for Demulsibility Characteristics of Lubricating Oils

D2712-91(2016): Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography

D2713-15: Standard Test Method for Dryness of Propane (Valve Freeze Method)

D2714-94(2014): Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

D2715-92(2012): Standard Test Method for Volatilization Rates of Lubricants in Vacuum

D2717-95(2009): Standard Test Method for Thermal Conductivity of Liquids

D2728-98(2014): Standard Practice for Paving Uses and Application Temperatures for Road Tars

D2764-99(2015)e1: Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

D2766-95(2009): Standard Test Method for Specific Heat of Liquids and Solids

D2779-92(2012): Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids

D2782-02(2014)e1: Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

D2783-03(2014): Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

D2786-91(2016): Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry

D2789-95(2016): Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry

D287-12b: Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

D2872-12e1: Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

D2878-10(2016): Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

D2879-10: Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

D2880-15: Standard Specification for Gas Turbine Fuel Oils

D2881-12(2014): Standard Classification for Metalworking Fluids and Related Materials

D2884-93(2012): Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method

D2885-13: Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

D2887-16a: Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

D2889-95(2015): Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels

D2890-92(2013): Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

D2892-17a: Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

D2893-04(2014)e1: Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

D2896-15: Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

D2962-10: Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

D2981-94(2014): Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

D2982-07(2013): Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

D2983-17: Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

D2995-14: Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors

D3104-14a: Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

D3115-95(2014): Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear

D3120-08(2014): Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

D3141/D3141M-15: Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

D3142/D3142M-11: Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

D3143/D3143M-13: Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

D322-97(2016): Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

D3227-16: Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

D3228-08(2014): Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

D323-15a: Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

D3230-13: Standard Test Method for Salts in Crude Oil (Electrometric Method)

D3231-13: Standard Test Method for Phosphorus in Gasoline

D3233-93(2014): Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

D3235-16e1: Standard Test Method for Solvent Extractables in Petroleum Waxes

D3236-15: Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials

D3237-17: Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

D3238-17: Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method

D3239-91(2016): Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry

D3240-15: Standard Test Method for Undissolved Water In Aviation Turbine Fuels

D3241-16a: Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

D3242-11(2017): Standard Test Method for Acidity in Aviation Turbine Fuel

D3244-16: Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

D3246-15: Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

D3279-12e1: Standard Test Method for n-Heptane Insolubles

D3289-17: Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)

D3328-06(2013): Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography

D3336-17: Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

D3338/D3338M-09(2014)e2: Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D3339-12(2017): Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

D3341-16: Standard Test Method for Lead in Gasoline—Iodine Monochloride Method

D3342-90(2017): Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

D3343-16: Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels

D3344-90(2015): Standard Test Method for Total  Wax  Content  of  Corrugated  Paperboard

D3348-12(2017): Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)

D3381/D3381M-13: Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

D341-17: Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products

D3414-98(2011)e1: Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy

D3423/D3423M-15: Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)

D3427-15: Standard Test Method for Air Release Properties of Hydrocarbon Based Oils

D3429-93(2012): Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids

D3461-14: Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

D3462/D3462M-16: Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

D3521-86(2017): Standard Test Method for Surface Wax Coating On Corrugated Board

D3523-92(2012): Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

D3525-04(2016): Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography

D3527-15: Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

D3588-98(2017): Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels

D3603-14: Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

D3605-17: Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

D3606-10e1: Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography

D3607-08(2016): Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

D3650-93(2011): Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis

D3699-13be1: Standard Specification for Kerosine

D3700-16: Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

D3701-17: Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

D3702-94(2014): Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

D3703-13: Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

D3704-96(2012): Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

D3705-14: Standard Test Method for Misting Properties of Lubricating Fluids

D3712-05(2017): Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography

D3764-15e1: Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

D381-12(2017): Standard Test Method for Gum Content in Fuels by Jet Evaporation

D3827-92(2012): Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

D3828-16a: Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

D3829-17: Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

D3831-12(2017): Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

D3902-90(2012): Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas

D3944-12(2017): Standard Test Method for Solidification Point of Petroleum Wax

D3948-14: Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

D3956-12: Standard Specification for Methane Thermophysical Property Tables

D396-17: Standard Specification for Fuel Oils

D3984-13: Standard Specification for Ethane Thermophysical Property Tables

D4006-16e1: Standard Test Method for Water in Crude Oil by Distillation

D4007-11(2016)e1: Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

D4042-93(2014): Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

D4045-15: Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

D4046-14: Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

D4047-13: Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

D4048-16e1: Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

D4049-16: Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

D4051-10(2015): Standard Practice for Preparation of Low-Pressure Gas Blends

D4052-16: Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

D4054-16: Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

D4055-04(2013): Standard Test Method for Pentane Insolubles by Membrane Filtration

D4056-16: Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

D4057-12: Standard Practice for Manual Sampling of Petroleum and Petroleum Products

D4072-98(2013): Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

D4084-07(2012): Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

D4124-09: Standard Test Method for Separation of Asphalt into Four Fractions

D4150-08(2016): Standard Terminology Relating to Gaseous Fuels

D4170-16: Standard Test Method for Fretting Wear Protection by Lubricating Greases

D4171-16a: Standard Specification for Fuel System Icing Inhibitors

D4172-94(2016): Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

D4174-15: Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

D4175-17ae1: Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants

D4176-04(2014): Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

D4177-16e1: Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

D4178-82(2012): Standard Practice for Calibrating Moisture Analyzers

D4215-07(2013): Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

D4289-13(2014)e1: Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

D4290-15: Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

D4291-04(2013): Standard Test Method for Trace Ethylene Glycol in Used Engine Oil

D4292-10: Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

D4293-15: Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications

D4294-16e1: Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

D4296-83(2015)e1: Standard Practice for Sampling Pitch

D4304-17: Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines

D4306-15: Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

D4307-17: Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

D4308-13: Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

D4310-10(2015): Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

D4311/D4311M-15: Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

D4312-15: Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

D4362-13: Standard Specification for Propane Thermophysical Property Tables

D4377-00(2011): Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration

D4378-13: Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

D4418-17: Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

D4419-90(2015): Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

D4422-13: Standard Test Method for Ash in Analysis of Petroleum Coke

D4423-10(2015): Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons

D4424-09(2014): Standard Test Method for Butylene Analysis by Gas Chromatography

D4425-09(2014): Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)

D445-17a: Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

D446-12: Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

D4468-85(2015): Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

D4485-16: Standard Specification for Performance of Active API Service Category Engine Oils

D4486-10: Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

D449/D449M-03(2014)e1: Standard Specification for Asphalt Used in Dampproofing and Waterproofing

D4529-17: Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D4530-15: Standard Test Method for Determination of Carbon Residue (Micro Method)

D4539-16: Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

D4616-95(2013): Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

D4625-16: Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)

D4626-95(2015): Standard Practice for Calculation of Gas Chromatographic Response Factors

D4627-12: Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

D4628-16: Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

D4629-12(2017): Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

D4636-17: Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils

D4650-14: Standard Specification for Normal Butane Thermophysical Property Tables

D4651-14: Standard Specification for Isobutane Thermophysical Property Tables

D4682-13: Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

D4683-17: Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

D4684-17: Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

D4693-07(2017): Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

D4715-98(2012): Standard Test Method for Coking Value of Tar and Pitch (Alcan)

D473-07(2017)e1: Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

D4737-10(2016): Standard Test Method for Calculated Cetane Index by Four Variable Equation

D4739-11(2017): Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

D4740-04(2014): Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

D4741-17: Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

D4742-17: Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

D4746-14e1: Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

D4784-93(2015): Standard Specification for LNG Density Calculation Models

D4798/D4798M-11(2016): Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

D4799/D4799M-17: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

D4806-17: Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D4807-05(2015): Standard Test Method for Sediment in Crude Oil by Membrane Filtration

D4808-17: Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

D4809-13: Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

D4810-06(2015): Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes

D4814-17: Standard Specification for Automotive Spark-Ignition Engine Fuel

D4815-15b: Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

D482-13: Standard Test Method for Ash from Petroleum Products

D483-04(2014): Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

D4857-12: Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

D4858-13: Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

D4859-13: Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC

D4860-14: Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

D4863-13: Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

D4865-09(2014): Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

D4866/D4866M-88(2017): Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures

D4868-17: Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels

D4870-09(2014): Standard Test Method for Determination of Total Sediment in Residual Fuels

D4871-11(2016): Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus

D4887/D4887M-11(2016): Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials

D4888-06(2015): Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes

D4891-13: Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion

D4892-14: Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

D4893-94(2015)e1: Standard Test Method for Determination of Pitch Volatility

D4898-16: Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

D490-92(2016): Standard Specification for Road Tar

D4924-89(2017): Standard Classification for Petroleum Waxes for Use in Rubber Compounding

D4927-15: Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

D4928-12: Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

D4929-16: Standard Test Method for Determination of Organic Chloride Content in Crude Oil

D4930-06(2011): Standard Test Method for Dust Control Material on Calcined Petroleum Coke

D4931-06(2011): Standard Test Method for Gross Moisture in Green Petroleum Coke

D4950-14: Standard Classification and Specification for Automotive Service Greases

D4951-14: Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

D4952-12(2017): Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

D4953-15: Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

D4984-06(2015): Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes

D4989/D4989M-90a(2014)e1: Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer

D4998-13: Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

D5/D5M-13: Standard Test Method for Penetration of Bituminous Materials

D5001-10(2014): Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

D5002-16: Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

D5003-06a(2011): Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

D5004-11: Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

D5006-11(2016): Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

D5018-89(2015)e1: Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

D5056-17: Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

D5059-14: Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

D5133-15: Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

D5134-13: Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

D5148-10: Standard Test Method for Centrifuge Kerosine Equivalent

D5182-97(2014): Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

D5183-05(2016): Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

D5184-12(2017): Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

D5185-13e1: Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D5186-15: Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography

D5187-10(2015)e1: Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction

D5188-16: Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)

D5191-15: Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

D5234-92(2017): Standard Guide for Analysis of Ethylene Product

D5236-17: Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

D524-15: Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

D525-12a: Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

D5273-92(2012): Standard Guide for Analysis of Propylene Concentrates

D5274-00(2014): Standard Guide for Analysis of 1,3–Butadiene Product

D5275-17: Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

D5287-08(2015): Standard Practice for Automatic Sampling of Gaseous Fuels

D5291-16: Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

D5292-99(2014): Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

D5293-17a: Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

D5303-92(2012): Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

D5304-15: Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

D5305-12: Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

D5306-92(2013): Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

D5346-17: Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds

D5361/D5361M-16: Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing

D5372-17: Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

D5384-14: Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

D5441-98(2013): Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography

D5442-17: Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

D5443-14: Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography

D5452-12: Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

D5453-16e1: Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

D5454-11e1: Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers

D546-17: Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures

D5481-13: Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

D5482-07(2013): Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)

D5483-05(2015): Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

D5500-16: Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D5501-12(2016): Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

D5504-12: Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

D5505-14: Standard Practice for Classifying Emulsified Recycling Agents

D5534-94(2011)e1: Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

D5579-16: Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

D5580-15: Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

D5581-07a(2013): Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

D5598-01(2012): Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

D5599-17: Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

D56-16a: Standard Test Method for Flash Point by Tag Closed Cup Tester

D5600-17: Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D5621-07(2013): Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

D5622-17: Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

D5623-94(2014): Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

D565-99(2013): Standard Test Method for Carbonizable Substances in White Mineral Oil

D566-17: Standard Test Method for Dropping Point of Lubricating Grease

D5662-17: Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

D5704-17: Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

D5705-15: Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

D5706-16: Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D5707-16: Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D5708-15: Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

D5709-09(2015): Standard Test Method for Sieve Analysis of Petroleum Coke

D5710/D5710M-15: Standard Specification for Trinidad Lake Modified Asphalt

D5727/D5727M-00(2017): Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)

D5760-13: Standard Specification for Performance of Manual Transmission Gear Lubricants

D5762-12(2017): Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

D5763-11(2016): Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

D5769-15: Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

D5770-11(2017): Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

D5771-17: Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)

D5772-17: Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)

D5773-17e1: Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)

D5797-17: Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines

D5798-17: Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

D5799-95(2014): Standard Test Method for Determination of Peroxides in Butadiene

D5800-15a: Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

D5801-17: Standard Test Method for Toughness and Tenacity of Asphalt Materials

D5842-17: Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

D5845-01(2016): Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy

D5846-07(2012): Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

D5853-17: Standard Test Method for Pour Point of Crude Oils

D5854-96(2015): Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

D5863-00a(2016): Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

D5864-17: Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

D5949-16: Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

D5950-14: Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

D5954-98(2014)e1: Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy

D5966-13: Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

D5967-17: Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

D5968-17: Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C

D5969-11(2016): Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

D5972-16: Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

D5983-17: Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

D5984-11(2017): Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

D5985-02(2014): Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

D5986-96(2015): Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

D6/D6M-95(2011)e1: Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds

D6006-17: Standard Guide for Assessing Biodegradability of Hydraulic Fluids

D6021-12: Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

D6022-06(2012): Standard Practice for Calculation of Permanent Shear Stability Index

D6045-12(2017): Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

D6046-17: Standard Classification of Hydraulic Fluids for Environmental Impact

D6074-15: Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

D6078-04(2016): Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

D6079-11(2016): Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

D6080-12a: Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

D6081-98(2014): Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

D6082-12(2017): Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

D6084/D6084M-13: Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

D61-15: Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

D611-12(2016): Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

D6114/D6114M-09: Standard Specification for Asphalt-Rubber Binder

D612-88(2017): Standard Test Method for Carbonizable Substances in Paraffin Wax

D6120-97(2017)e1: Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

D6121-17: Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

D6122-15: Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

D613-17b: Standard Test Method for Cetane Number of Diesel Fuel Oil

D6138-16: Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

D6139-17: Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

D6154-15: Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

D6158-16: Standard Specification for Mineral Hydraulic Oils

D6159-17: Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

D6160-98(2013): Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

D6184-17: Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)

D6185-11: Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

D6186-08(2013): Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

D6200-01(2012): Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

D6201-04(2014): Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D6203-06(2012): Standard Test Method for Thermal Stability of Way Lubricants

D6217-11(2016): Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

D6224-16: Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

D6227-17: Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

D6228-10: Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

D6258-17: Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

D6259-15: Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method

D6273-14: Standard Test Methods for Natural Gas Odor Intensity

D6277-07(2012): Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

D6278-17e1: Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

D6296-98(2013): Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography

D6299-17: Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

D6300-17a: Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

D6304-16e1: Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

D633-11(2016): Standard Volume Correction Table for Road Tar

D6334-12(2017): Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

D6335-16: Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

D6350-14: Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

D6351-10(2016): Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

D6352-15: Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography

D6356/D6356M-98(2011)e1: Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing

D6371-17: Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

D6373-16: Standard Specification for Performance Graded Asphalt Binder

D6374-12(2017)e1: Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

D6375-09(2014): Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

D6376-10(2017)e1: Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy

D6377-16: Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

D6378-10(2016): Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

D6379-11: Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D6380/D6380M-03(2013)e1: Standard Specification for Asphalt Roll Roofing (Organic Felt)

D6384-17: Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

D6417-15: Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

D6421-99a(2014): Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

D6423-14: Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends

D6424-04a(2014): Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

D6425-11: Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

D6426-13: Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

D6439-11(2017): Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

D6443-14: Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

D6447-09(2014): Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

D6448-16: Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

D6450-16a: Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

D6468-08(2013): Standard Test Method for High Temperature Stability of Middle Distillate Fuels

D6469-17: Standard Guide for Microbial Contamination in Fuels and Fuel Systems

D6470-99(2015): Standard Test Method for Salt in Crude Oils (Potentiometric Method)

D6481-14: Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

D6482-06(2016): Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

D6514-03(2014): Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils

D6521-13: Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

D6546-15: Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

D6547-16: Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

D6549-06(2015): Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

D6550-15: Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

D6553-00(2016): Standard Test Method for Coolant Compatibility of Way Lubricants

D6557-13: Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

D6560-12: Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

D6584-17: Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

D6591-11(2017): Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D6593-17: Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

D6594-14: Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C

D6595-17: Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

D6596-00(2016): Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

D6608-12: Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

D6615-15a: Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

D6616-17: Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C

D6617-17: Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

D6618-16: Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

D6624-14: Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

D6626-15: Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder

D6627/D6627M-11(2016): Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

D664-17: Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

D6648-08(2016): Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

D665-14e1: Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

D6666-04(2014): Standard Guide for Evaluation of Aqueous Polymer Quenchants

D6667-14: Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

D6668-01(2016): Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

D6681-17: Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

D6703-14: Standard Test Method for Automated Heithaus Titrimetry

D6704-08(2015): Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

D6708-16b: Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

D6709-15a: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

D6710-17: Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

D6723-12: Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

D6728-16: Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

D6729-14: Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

D6730-01(2016): Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

D6731-01(2011): Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

D6732-04(2015): Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

D6733-01(2016): Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

D6743-11(2015): Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

D6744-06(2017)e1: Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

D6745-11(2015): Standard Test Method for Linear Thermal Expansion of Electrode Carbons

D6748-02a(2012): Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

D6749-02(2012): Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

D6750-17: Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

D6751-15ce1: Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

D6756-17: Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

D6791-11(2017)e1: Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

D6792-17: Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories

D6793-02(2012): Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

D6794-14: Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long(6 h) Heating Time

D6795-13: Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

D6805-02(2016): Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions

D6810-13: Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

D6812-04a(2014): Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

D6816-11(2016): Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

D6821-17: Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

D6822-12b(2017): Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

D6823-08(2013): Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

D6824-13e1: Standard Test Method for Determining Filterability of Aviation Turbine Fuel

D6837-13: Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

D6838-04(2010): Standard Test Method for Cummins M11 High Soot Test

D6839-17: Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

D6849-13: Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

D6890-16e1: Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

D6891-15: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

D6892-03(2014): Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

D6894-13: Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

D6895-17: Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C

D6896-17: Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

D6897-16: Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

D6898-03(2016): Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

D6920-13: Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

D6922-13: Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

D6923-17: Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

D6927-15: Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures

D6929-16: Standard Practice to Evaluate the Effect of Freezing on Emulsified Asphalts

D6930-10: Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

D6933-13: Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

D6934-08(2016): Standard Test Method for Residue by Evaporation of Emulsified Asphalt

D6935-17: Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

D6936-17: Standard Test Method for Determining Demulsibility of Emulsified Asphalt

D6937-16: Standard Test Method for Determining Density of Emulsified Asphalt

D6945/D6945M-03(2017): Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)

D6946/D6946M-13e1: Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)

D6948/D6948M-03(2017): Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)

D6968-03(2015): Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

D6969-17: Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

D6970-03(2013)e1: Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

D6971-09(2014): Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

D6973-14: Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

D6974-16: Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

D6975-04(2010): Standard Test Method for Cummins M11 EGR Test

D6984-17a: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

D6986-03(2016): Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

D6987/D6987M-13a: Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

D6997-12: Standard Test Method for Distillation of Emulsified Asphalt

D6998-11: Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

D6999-12: Standard Practice for Miscibility of Emulsified Asphalts

D70-09e1: Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

D7038-17: Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

D7039-15a: Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D7040-04(2015): Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

D7041-16: Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection

D7042-16e3: Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

D7043-17: Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

D7044-15: Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids

D7058-04(2014): Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

D7059-09(2013): Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography

D7060-12(2014): Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

D7061-12: Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

D7094-17: Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

D7095-17: Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

D7096-16: Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

D7097-16a: Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT

D7098-08(2015): Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B

D71-94(2015)e1: Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

D7109-12: Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles

D7110-15: Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

D7111-16: Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7112-12: Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

D7152-11(2016): Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

D7153-15e1: Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

D7154-15: Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

D7155-11: Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

D7156-17: Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

D7157-12: Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

D7164-10(2015): Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography

D7165-10(2015): Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels

D7166-10(2015): Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels

D7169-16: Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography

D7170-16: Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method

D7171-16: Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

D7173-14: Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

D7175-15: Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

D7196-16: Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples

D721-17: Standard Test Method for Oil Content of Petroleum Waxes

D7212-13: Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

D7213-15: Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography

D7214-07a(2012): Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

D7215-16: Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels

D7216-17: Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

D7217-16: Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D7220-12(2017): Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

D7223-17: Standard Specification for Aviation Certification Turbine Fuel

D7224-14: Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer

D7226-13(2017): Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

D7229-08(2013)e1: Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

D7235-16: Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

D7236-16a: Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

D7260-17: Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

D7261-14: Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

D7278-16: Standard Guide for Prediction of Analyzer Sample System Lag Times

D7279-16: Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

D7280-15: Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

D7303-17: Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

D7314-10(2015): Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling

D7317-07(2013): Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

D7318-13: Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

D7319-17: Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

D7320-17a: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

D7321-16a: Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

D7328-17: Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

D7342-15: Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)

D7343-12(2017): Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

D7344-17: Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)

D7345-17: Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)

D7346-15: Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels

D7347-15: Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography

D7371-14: Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)

D7372-17: Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

D7373-12: Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model

D7397-17: Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)

D7398-11(2016): Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography

D7402-09(2017): Standard Practice for Identifying Cationic Emulsified Asphalts

D7403-09(2017): Standard Test Method for Determination of Residue of Emulsified Asphalt by Low-Temperature Vacuum Distillation

D7404-07(2016): Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer

D7405-15: Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

D7412-09: Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7414-09: Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7415-09: Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7416-09(2015): Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester

D7417-17: Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

D7418-12: Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring

D7419-13: Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection

D7420-11: Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D7421-16: Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine

D7422-17a: Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

D7423-17: Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection

D7450-13: Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

D7451-16: Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels

D7452-17: Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading

D7453-09(2015): Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation

D7454-14e1: Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus

D7455-14: Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

D7463-16e1: Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

D7464-14: Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

D7467-17: Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

D7468-16: Standard Test Method for Cummins ISM Test

D7482-17: Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

D7483-13a: Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

D7484-16: Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

D7493-14: Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection

D7496-17: Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

D7497-09(2016): Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique

D7500-15: Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography

D7501-12a: Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

D7524-10(2015): Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method

D7525-14: Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

D7527-10: Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry

D7528-17a: Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

D7544-12: Standard Specification for Pyrolysis Liquid Biofuel

D7545-14: Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)

D7546-15: Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor

D7547-17a: Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

D7548-16a: Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

D7549-17: Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

D7551-10(2015): Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence

D7553-15: Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

D7563-10(2016): Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel

D7564/D7564M-16: Standard Practice for Construction of Asphalt-Rubber Cape Seal

D7566-17a: Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

D7576-16: Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography

D7577-12(2016): Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

D7578-15: Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

D7579-09(2013): Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

D7589-16: Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

D7590-09(2014): Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry

D7591-12(2017): Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography

D7593-14: Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography

D7594-16: Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D7596-14: Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester

D7603-13: Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils

D7607/D7607M-11e1: Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)

D7618-13(2017): Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

D7619-17: Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

D7620-10(2015): Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

D7621-16: Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction

D7622-10(2015): Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

D7623-10(2015): Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

D7624-10: Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7636/D7636M-11: Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems

D7643-16: Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

D7647-10: Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction

D7665-17: Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids

D7666-12: Standard Specification for Triglyceride Burner Fuel

D7667-10(2015): Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method

D7668-17: Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method

D7669-15: Standard Guide for Practical Lubricant Condition Data Trend Analysis

D7670-10(2017): Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

D7671-10(2015): Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

D7683-17: Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)

D7684-11(2016): Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants

D7685-11(2016): Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings

D7686-11: Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument

D7687-17: Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration

D7688-11(2016): Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

D7689-17: Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)

D7690-11(2017): Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography

D7691-16: Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7717-11(2017): Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis

D7718-11: Standard Practice for Obtaining In-Service Samples of Lubricating Grease

D7719-17: Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline

D7720-11(2017): Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

D7721-17: Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency

D7739-11(2016): Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance

D7740-11(2016): Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

D7741/D7741M-11(2017): Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer

D7751-16: Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

D7752-11: Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids

D7753-12(2016): Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography

D7754-16: Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography

D7755-11(2017): Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine

D7756-13: Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection

D7757-17: Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D7777-13: Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter

D7778-15: Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

D7794-14: Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines

D7795-15: Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

D7796-12: Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography

D7797-17: Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method

D7798-15: Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)

D7806-12: Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy

D7807-12: Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection

D7808-12: Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material

D7825-12: Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer

D7826-17: Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

D7827-12: Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device

D7828-12: Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)

D7829-13e1: Standard Guide for Sediment and Water Determination in Crude Oil

D7833-14: Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography

D7843-16: Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

D7844-12: Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry

D7845-17: Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry

D7847-17: Standard Guide for Interlaboratory Studies for Microbiological Test Methods

D7862-17: Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

D7863-17: Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids

D7872-13: Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels

D7873-13e2: Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)

D7874-13: Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

D7876-13: Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

D7889-13: Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy

D7898-14: Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery

D7899-13: Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method

D7900-17: Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography

D7901-14b: Standard Specification for Dimethyl Ether for Fuel Purposes

D808-16: Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

D86-17: Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

D87-09(2014): Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

D873-12: Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

D874-13a: Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

D892-13e1: Standard Test Method for Foaming Characteristics of Lubricating Oils

D893-14: Standard Test Method for Insolubles in Used Lubricating Oils

D909-17: Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline

D91-02(2017): Standard Test Method for Precipitation Number of Lubricating Oils

D910-17: Standard Specification for Leaded Aviation Gasolines

D92-16b: Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

D93-16a: Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

D937-07(2012): Standard Test Method for Cone Penetration of Petrolatum

D938-12(2017): Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum

D94-07(2017): Standard Test Methods for Saponification Number of Petroleum Products

D942-15: Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method

D943-17: Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

D946/D946M-15: Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction

D95-13e1: Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

D97-17a: Standard Test Method for Pour Point of Petroleum Products

D972-16: Standard Test Method for Evaporation Loss of Lubricating Greases and Oils

D974-14e2: Standard Test Method for Acid and Base Number by Color-Indicator Titration

D975-17: Standard Specification for Diesel Fuel Oils

D976-06(2016): Standard Test Method for Calculated Cetane Index of Distillate Fuels

D977-17: Standard Specification for Emulsified Asphalt

D979/D979M-15: Standard Practice for Sampling Bituminous Paving Mixtures

E1259-16: Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C

E1302-13(2017): Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids

E1497-17: Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids

E1687-10(2014): Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids

E1739-95(2015): Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites

E1943-98(2015): Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites

E2144-11(2016): Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres

E2148-16: Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety

E2169-17: Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids

E2256-13: Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service

E2275-14: Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance

E2412-10: Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

E2523-13: Standard Terminology for Metalworking Fluids and Operations

E2563-13: Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method

E2564-13: Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method

E2657-16: Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids

E2681-13: Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum

E2694-16: Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

E2733-10(2015): Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems

E2889-12(2017): Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment

F2161-10: Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils

F2489-06(2013): Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases

F2649-14: Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks

F2661-07(2015): Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer

F2897-15a: Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)

G170-06(2012): Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

G184-06(2016): Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage

G185-06(2016): Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode

G205-16: Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils

G208-12(2016): Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus