All Mining & Mineral Processing Standards

Search within Mining & Mineral Processing


C110-16e1: Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C1271-99(2012): Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

C1301-95(2014): Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

C25-11e2: Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

C50/C50M-13: Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

C51-11: Standard Terminology Relating to Lime and Limestone (as used by the Industry)

C602-13a: Standard Specification for Agricultural Liming Materials

C706-13: Standard Specification for Limestone for Animal Feed Use

C737-13: Standard Specification for Limestone for Dusting of Coal Mines

C911-06(2011): Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

C977-10: Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

D121-15: Standard Terminology of Coal and Coke

D167-12a: Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke

D1857/D1857M-17a: Standard Test Method for Fusibility of Coal and Coke Ash

D197-87(2012): Standard Test Method for Sampling and Fineness Test of Pulverized Coal

D2013/D2013M-12: Standard Practice for Preparing Coal Samples for Analysis

D2014-97(2010): Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven

D2131-97(2016): Standard Classification for Natural Muscovite Mica Splittings

D2234/D2234M-17: Standard Practice for Collection of a Gross Sample of Coal

D2492-02(2012): Standard Test Method for Forms of Sulfur in Coal

D2639/D2639M-16: Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer

D2797/D2797M-11a: Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light

D2798-11a: Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal

D2799-13: Standard Test Method for Microscopical Determination of the Maceral Composition of Coal

D291-07(2012): Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal

D293-93(2010): Standard Test Method for the Sieve Analysis of Coke

D3038-93(2010): Standard Test Method for Drop Shatter Test for Coke

D3172-13: Standard Practice for Proximate Analysis of Coal and Coke

D3174-12: Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal

D3175-17: Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke

D3176-15: Standard Practice for Ultimate Analysis of Coal and Coke

D3180-15: Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases

D3302/D3302M-17: Standard Test Method for Total Moisture in Coal

D3402/D3402M-16: Standard Test Method for Tumbler Test for Coke

D346/D346M-11: Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis

D351-14: Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality

D3682-13: Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes

D3683-11: Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption

D3761-10: Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method

D388-17: Standard Classification of Coals by Rank

D3997/D3997M-16: Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light

D409/D409M-16: Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method

D4208-13: Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method

D4239-17: Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

D4326-13: Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence

D4371-06(2012): Standard Test Method for Determining the Washability Characteristics of Coal

D440-07(2012): Standard Test Method of Drop Shatter Test for Coal

D441-07(2012): Standard Test Method of Tumbler Test for Coal

D4596-09(2015): Standard Practice for Collection of Channel Samples of Coal in a Mine

D4606-15: Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method

D4749-87(2012): Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size

D5016-16: Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption

D5061-16: Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke

D5114-90(2010): Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell

D5192-09(2015): Standard Practice for Collection of Coal Samples from Core

D5263-15: Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction

D5373-16: Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke

D5515-17a: Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer

D5671-95(2011): Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light

D5865-13: Standard Test Method for Gross Calorific Value of Coal and Coke

D5987-96(2015): Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods

D6172-98(2010): Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures

D6249-06(2011): Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

D6316-09be1: Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke

D6347/D6347M-05(2010): Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods

D6349-13: Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry

D6357-11: Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry

D6414-14: Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption

D6542-05(2010): Standard Practice for Tonnage Calculation of Coal in a Stockpile

D6543-17: Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers

D6609-17: Standard Guide for Part-Stream Sampling of Coal

D6721-01(2015): Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry

D6722-11: Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis

D6796-16: Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies

D6883-17: Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles

D7348-13: Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

D7430-16be1: Standard Practice for Mechanical Sampling of Coal

D7448-16: Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke

D7582-15: Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis

D7699/D7699M-11: Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites

D7708-14: Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks

D7780-12: Standard Practice for Geospatial Data for Representing Coal Mining Features

E1070-17: Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry

E1282-11(2016): Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

E135-16: Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials

E1898-13: Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

E1915-13: Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

E2027-09: Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

E2050-17: Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

E2242-13: Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

E2243-13: Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation

E2278-13: Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage

E2293-03(2013): Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury

E2294-03(2013): Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

E2295-13: Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels

E2296-03(2013): Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

E246-10(2015): Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry

E247-01(2015)e1: Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

E248-12: Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

E276-13: Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials

E278-01(2015)e1: Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

E279-97(2010): Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test

E2941-14: Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion

E314-16: Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques

E316-11: Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry

E342-11(2016): Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry

E382-12: Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets

E389-13: Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials

E463-14a: Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry

E465-11(2017): Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry

E50-17: Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

E507-13: Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry

E508-13: Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry

E60-11(2016): Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

E738-11: Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry

E815-17a: Standard Test Method for Determination of Calcium Fluoride in Fluorspar by EDTA Complexometric Titrimetry

E841-12a: Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry

E877-13: Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties

E878-12: Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry

E945-12: Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry

F2986-12(2017): Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications

F2987-12: Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications