A1-00(2010): Standard Specification for Carbon Steel Tee Rails
A100-07(2012): Standard Specification for Ferrosilicon
A1000/A1000M-11: Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A1001-01(2015): Standard Specification for High Strength Steel Castings in Heavy Sections
A1002-16: Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
A1003/A1003M-15: Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1004/A1004M-99(2014): Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
A1007-15: Standard Specification for Carbon Steel Wire for Wire Rope
A1008/A1008M-16: Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
A1009-05(2010): Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications
A101-04(2014)e1: Standard Specification for Ferrochromium
A1010/A1010M-13: Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
A1011/A1011M-15: Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1012-10(2015): Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
A1013-00(2013)e1: Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
A1014/A1014M-16: Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
A1015-01(2014): Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
A1016/A1016M-17: Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
A1017/A1017M-11(2015): Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
A1018/A1018M-16a: Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A102-04(2014): Standard Specification for Ferrovanadium
A1020/A1020M-02(2012): Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
A1021/A1021M-05(2015): Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
A1022/A1022M-16b: Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1023/A1023M-15: Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
A1024/A1024M-02(2012): Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
A1025/A1025M-10(2015): Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements
A1028-03(2015): Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
A1030/A1030M-16: Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
A1031/A1031M-12: Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
A1032-15: Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
A1033-10(2015): Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
A1034/A1034M-10a(2015): Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
A1035/A1035M-16b: Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
A1036-04(2015): Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
A1037/A1037M-05(2012): Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded
A1038-13e1: Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
A1039/A1039M-13: Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
A1040-10(2015)e1: Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1043/A1043M-14: Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
A1044/A1044M-16a: Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
A1046/A1046M-17: Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
A1047/A1047M-05(2014): Standard Test Method for Pneumatic Leak Testing of Tubing
A1049/A1049M-10(2015): Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
A105/A105M-14: Standard Specification for Carbon Steel Forgings for Piping Applications
A1053/A1053M-12e1: Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
A1054-16: Standard Specification for Sintered Ferrite Permanent Magnets
A1055/A1055M-16: Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
A1056-12: Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
A1057/A1057M-08(2014): Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1058-14: Standard Test Methods for Mechanical Testing of Steel Products—Metric
A1059/A1059M-08(2013): Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
A106/A106M-15: Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A1060/A1060M-16b: Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1061/A1061M-16: Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
A1062-10(2015): Standard Specification for Steel Castings Sampling
A1063/A1063M-17: Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1064/A1064M-17: Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1065/A1065M-15: Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
A1066/A1066M-11(2015)e1: Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
A1067/A1067M-12a: Standard Specification for Test Coupons for Steel Castings
A1068-10(2015): Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
A1069/A1069M-16: Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
A1071/A1071M-11(2015): Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
A1072/A1072M-11(2015): Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
A1073/A1073M-16: Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
A1074-11(2015): Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
A1075-12: Standard Specification for Flanged Steel U-Channel Posts
A1076/A1076M-13: Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
A1077/A1077M-14: Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
A1078/A1078M-12e1: Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
A1079-17: Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A108-13: Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A1080-15: Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
A1081/A1081M-15: Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
A1082/A1082M-16: Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
A1083/A1083M-12: Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
A1084-15a: Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
A1086-13: Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types
A1087/A1087M-16: Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet
A1088-13: Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
A109/A109M-16: Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A111-99a(2014): Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
A116-11(2016): Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
A121-13: Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
A123/A123M-15: Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A125-96(2013)e1: Standard Specification for Steel Springs, Helical, Heat-Treated
A126-04(2014): Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A128/A128M-93(2017): Standard Specification for Steel Castings, Austenitic Manganese
A131/A131M-14: Standard Specification for Structural Steel for Ships
A132-04(2014): Standard Specification for Ferromolybdenum
A134-96(2012): Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A135/A135M-09(2014): Standard Specification for Electric-Resistance-Welded Steel Pipe
A139/A139M-16: Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A143/A143M-07(2014): Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A144-04(2014): Standard Specification for Ferrotungsten
A146-04(2014): Standard Specification for Molybdenum Oxide Products
A148/A148M-15a: Standard Specification for Steel Castings, High Strength, for Structural Purposes
A153/A153M-16a: Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A159-83(2015): Standard Specification for Automotive Gray Iron Castings
A178/A178M-02(2012): Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179/A179M-90a(2012): Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A181/A181M-14: Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A182/A182M-16a: Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A183-14: Standard Specification for Carbon Steel Track Bolts and Nuts
A184/A184M-06(2011): Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
A192/A192M-02(2012): Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A193/A193M-16: Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M-17: Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A197/A197M-00(2015): Standard Specification for Cupola Malleable Iron
A2-02(2014): Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A203/A203M-12: Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A204/A204M-12: Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A209/A209M-03(2017): Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A210/A210M-02(2012): Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A213/A213M-17: Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A214/A214M-96(2012): Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A216/A216M-16: Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A217/A217M-14: Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A220/A220M-99(2014): Standard Specification for Pearlitic Malleable Iron
A225/A225M-12: Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A227/A227M-06(2017): Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A228/A228M-16: Standard Specification for Steel Wire, Music Spring Quality
A229/A229M-12: Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
A230/A230M-05(2011)e1: Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
A231/A231M-15: Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
A232/A232M-05(2011)e1: Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A234/A234M-16: Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A239-14: Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,
A240/A240M-16a: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A242/A242M-13: Standard Specification for High-Strength Low-Alloy Structural Steel
A247-16a: Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
A249/A249M-16a: Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A250/A250M-05(2014): Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A252-10: Standard Specification for Welded and Seamless Steel Pipe Piles
A254/A254M-12: Standard Specification for Copper-Brazed Steel Tubing
A255-10(2014): Standard Test Methods for Determining Hardenability of Steel
A262-15: Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A264-12: Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
A265-12: Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A266/A266M-13: Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
A268/A268M-10(2016): Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A27/A27M-17: Standard Specification for Steel Castings, Carbon, for General Application
A270/A270M-15: Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
A275/A275M-15: Standard Practice for Magnetic Particle Examination of Steel Forgings
A278/A278M-01(2015): Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A283/A283M-13: Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A285/A285M-12: Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A288-91(2013): Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A289/A289M-97(2013): Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A29/A29M-16: Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
A290/A290M-16: Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A291/A291M-16a: Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A295/A295M-14: Standard Specification for High-Carbon Anti-Friction Bearing Steel
A297/A297M-17: Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A299/A299M-09(2014): Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A3-01(2012): Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A302/A302M-12: Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A304-16: Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A307-14e1: Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
A31-14: Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A311/A311M-04(2015): Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A312/A312M-17: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A313/A313M-13: Standard Specification for Stainless Steel Spring Wire
A314-15: Standard Specification for Stainless Steel Billets and Bars for Forging
A319-71(2015): Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
A320/A320M-17: Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
A322-13: Standard Specification for Steel Bars, Alloy, Standard Grades
A323-05(2015): Standard Specification for Ferroboron
A324-08(2013): Standard Specification for Ferrotitanium
A327/A327M-11: Standard Test Methods for Impact Testing of Cast Irons
A328/A328M-13a: Standard Specification for Steel Sheet Piling
A333/A333M-16: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
A334/A334M-04a(2016): Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A335/A335M-15a: Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A336/A336M-15: Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A338-84(2014): Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
A34/A34M-06(2012): Standard Practice for Sampling and Procurement Testing of Magnetic Materials
A340-16: Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
A341/A341M-16: Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods
A342/A342M-14: Standard Test Methods for Permeability of Weakly Magnetic Materials
A343/A343M-14: Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A345-14: Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A348/A348M-05(2015): Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A350/A350M-15: Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A351/A351M-16: Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
A352/A352M-06(2012): Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A354-11: Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A355-89(2012): Standard Specification for Steel Bars, Alloys, for Nitriding
A356/A356M-16: Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A358/A358M-15: Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A36/A36M-14: Standard Specification for Carbon Structural Steel
A363-03(2014): Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A367-11: Standard Test Methods of Chill Testing of Cast Iron
A368-95a(2013): Standard Specification for Stainless Steel Wire Strand
A369/A369M-11(2016): Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A370-17: Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A372/A372M-16: Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A376/A376M-14: Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
A377-03(2014): Standard Index of Specifications for Ductile-Iron Pressure Pipe
A380/A380M-13: Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A381-96(2012): Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A384/A384M-07(2013): Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A387/A387M-17: Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A388/A388M-16a: Standard Practice for Ultrasonic Examination of Steel Forgings
A389/A389M-13: Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A390-06(2016): Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A391/A391M-07(2012): Standard Specification for Grade 80 Alloy Steel Chain
A392-11a: Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A394-08(2015): Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A395/A395M-99(2014): Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A400-69(2012): Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A401/A401M-15: Standard Specification for Steel Wire, Chromium-Silicon Alloy
A403/A403M-16: Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A407-07(2013): Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A409/A409M-15: Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A411-08(2013): Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A413/A413M-07(2012): Standard Specification for Carbon Steel Chain
A414/A414M-14: Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
A416/A416M-17: Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
A418/A418M-15: Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A420/A420M-16: Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M-15: Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
A423/A423M-09(2014): Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A424/A424M-09a(2016): Standard Specification for Steel, Sheet, for Porcelain Enameling
A426/A426M-13: Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A427/A427M-10(2015): Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A428/A428M-10(2014): Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A435/A435M-90(2012): Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A436-84(2015): Standard Specification for Austenitic Gray Iron Castings
A437/A437M-15: Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
A447/A447M-11(2016): Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A449-14: Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A450/A450M-15: Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
A451/A451M-14: Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A453/A453M-16: Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A455/A455M-12a: Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A456/A456M-08(2013): Standard Specification for Magnetic Particle Examination of Large Crankshaft
A459-08(2013): Standard Specification for Zinc-Coated Flat Steel Armoring Tape
A460-11(2016): Standard Specification for Copper-Clad Steel Wire Strand
A463/A463M-15: Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A466/A466M-07(2012): Standard Specification for Weldless Chain
A467/A467M-07(2012): Standard Specification for Machine and Coil Chain
A469/A469M-07(2017): Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A47/A47M-99(2014): Standard Specification for Ferritic Malleable Iron Castings
A470/A470M-05(2015): Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A471/A471M-09(2014): Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A472/A472M-07(2017): Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A473-17: Standard Specification for Stainless Steel Forgings
A474-03(2013): Standard Specification for Aluminum-Coated Steel Wire Strand
A475-03(2014): Standard Specification for Zinc-Coated Steel Wire Strand
A476/A476M-00(2014): Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A478-97(2013): Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479/A479M-17: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A48/A48M-03(2016): Standard Specification for Gray Iron Castings
A480/A480M-16b: Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A481-05(2015): Standard Specification for Chromium Metal
A482/A482M-11(2016): Standard Specification for Ferrochrome-Silicon
A483/A483M-10(2015): Standard Specification for Silicomanganese
A484/A484M-16: Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A485-14: Standard Specification for High Hardenability Antifriction Bearing Steel
A487/A487M-14: Standard Specification for Steel Castings Suitable for Pressure Service
A488/A488M-17: Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A489-12: Standard Specification for Carbon Steel Lifting Eyes
A49-12: Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A491-11: Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A492-95(2013): Standard Specification for Stainless Steel Rope Wire
A493-16: Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A494/A494M-17: Standard Specification for Castings, Nickel and Nickel Alloy
A495-06(2015): Standard Specification for Calcium-Silicon Alloys
A499-15: Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
A500/A500M-13: Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A502-03(2015): Standard Specification for Rivets, Steel, Structural
A503/A503M-15: Standard Specification for Ultrasonic Examination of Forged Crankshafts
A504/A504M-14: Standard Specification for Wrought Carbon Steel Wheels
A505-16: Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A506-16: Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A507-16: Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A508/A508M-17: Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A510/A510M-13: Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
A511/A511M-16: Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
A512-06(2012): Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A513/A513M-15: Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A514/A514M-14: Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A515/A515M-10(2015): Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A516/A516M-10(2015): Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A518/A518M-99(2012): Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A519-06(2012): Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A521/A521M-06(2016): Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A522/A522M-14: Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A523-96(2012): Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A524-96(2012): Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A529/A529M-14: Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A53/A53M-12: Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A530/A530M-12: Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A531/A531M-13: Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A532/A532M-10(2014): Standard Specification for Abrasion-Resistant Cast Irons
A534-14: Standard Specification for Carburizing Steels for Anti-Friction Bearings
A536-84(2014): Standard Specification for Ductile Iron Castings
A540/A540M-15: Standard Specification for Alloy-Steel Bolting for Special Applications
A541/A541M-05(2015): Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A550-16: Standard Specification for Ferrocolumbium (Ferroniobium)
A551/A551M-08(2013): Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
A554-16: Standard Specification for Welded Stainless Steel Mechanical Tubing
A555/A555M-16: Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A556/A556M-96(2012): Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A560/A560M-12: Standard Specification for Castings, Chromium-Nickel Alloy
A561-08(2014): Standard Practice for Macroetch Testing of Tool Steel Bars
A563-15: Standard Specification for Carbon and Alloy Steel Nuts
A563M-07(2013): Standard Specification for Carbon and Alloy Steel Nuts (Metric)
A564/A564M-13: Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A565/A565M-10(2017)e1: Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A568/A568M-15: Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A571/A571M-01(2015): Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A572/A572M-15: Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A573/A573M-13: Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A574-16: Standard Specification for Alloy Steel Socket-Head Cap Screws
A575-96(2013)e1: Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576-90b(2012): Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A577/A577M-90(2012): Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M-07(2012): Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
A579/A579M-17: Standard Specification for Superstrength Alloy Steel Forgings
A580/A580M-16: Standard Specification for Stainless Steel Wire
A581/A581M-95b(2014): Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582/A582M-12(2017): Standard Specification for Free-Machining Stainless Steel Bars
A586-04a(2014): Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
A587-96(2012): Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A588/A588M-15: Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A589/A589M-06(2012): Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A592/A592M-10(2015): Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
A595/A595M-14: Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A596/A596M-14: Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A598/A598M-02(2015): Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
A599/A599M-07(2012): Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A6/A6M-16a: Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A600-92a(2016): Standard Specification for Tool Steel High Speed
A601/A601M-10(2015): Standard Specification for Electrolytic Manganese Metal
A602-94(2014): Standard Specification for Automotive Malleable Iron Castings
A603-98(2014): Standard Specification for Zinc-Coated Steel Structural Wire Rope
A604/A604M-07(2017): Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A606/A606M-15: Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A608/A608M-14: Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A609/A609M-12: Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A610-79(2014): Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A612/A612M-12: Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A615/A615M-16: Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A618/A618M-04(2015): Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A623-16: Standard Specification for Tin Mill Products, General Requirements
A623M-16: Standard Specification for Tin Mill Products, General Requirements [Metric]
A624/A624M-13: Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625/A625M-13: Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
A626/A626M-16: Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A627-03(2011): Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A630-16ae1: Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A632-04(2014): Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A633/A633M-13: Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M-15: Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A636-08(2013): Standard Specification for Nickel Oxide Sinter
A638/A638M-10: Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A640-97(2014): Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A641/A641M-09a(2014): Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
A644-14: Standard Terminology Relating to Iron Castings
A646/A646M-06(2016): Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A648-12: Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
A649/A649M-10(2015): Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A65-07(2013): Standard Specification for Steel Track Spikes
A650/A650M-13: Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A653/A653M-15e1: Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M-13: Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A657/A657M-13: Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A659/A659M-12: Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A66-07(2013): Standard Specification for Steel Screw Spikes
A660/A660M-11(2016): Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A662/A662M-12: Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A663/A663M-12: Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A664-15: Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A666-15: Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A667/A667M-87(2012): Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A668/A668M-17: Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A67-00(2016): Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
A671/A671M-16a: Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A672/A672M-14: Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A673/A673M-07(2012): Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A674-10(2014): Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M-14: Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A677-16: Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A679/A679M-06(2012): Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A681-08(2015): Standard Specification for Tool Steels Alloy
A683-16: Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A684/A684M-15: Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A686-92(2016): Standard Specification for Tool Steel, Carbon
A688/A688M-15: Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
A689-97(2013)e1: Standard Specification for Carbon and Alloy Steel Bars for Springs
A690/A690M-13a: Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
A691/A691M-09(2014): Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A693-16: Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A694/A694M-16: Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A696-90a(2012): Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A697/A697M-13: Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A698/A698M-15: Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A701/A701M-10(2015): Standard Specification for Ferromanganese-Silicon
A702-13: Standard Specification for Steel Fence Posts, Hot Wrought
A703/A703M-17: Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M-06(2011): Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A705/A705M-13: Standard Specification for Age-Hardening Stainless Steel Forgings
A706/A706M-16: Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
A707/A707M-14: Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A709/A709M-16a: Standard Specification for Structural Steel for Bridges
A710/A710M-02(2013): Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A711/A711M-07(2012): Standard Specification for Steel Forging Stock
A712-14: Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
A713-04(2017): Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A716-08(2014): Standard Specification for Ductile Iron Culvert Pipe
A717/A717M-12: Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A719/A719M-14: Standard Test Method for Lamination Factor of Magnetic Materials
A720/A720M-02(2016)e1: Standard Test Method for Ductility of Nonoriented Electrical Steel
A721/A721M-02(2016): Standard Test Method for Ductility of Oriented Electrical Steel
A722/A722M-15: Standard Specification for High-Strength Steel Bars for Prestressed Concrete
A723/A723M-10(2015): Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A726-05(2010): Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
A727/A727M-14: Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A729/A729M-15e1: Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A732/A732M-14: Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A733-16: Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A735/A735M-12: Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A737/A737M-09(2013): Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A739-90a(2016): Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A74-16: Standard Specification for Cast Iron Soil Pipe and Fittings
A740-98(2014): Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A741-11(2016): Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
A742/A742M-13: Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A743/A743M-13ae1: Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M-13: Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A745/A745M-15: Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A746-09(2014): Standard Specification for Ductile Iron Gravity Sewer Pipe
A747/A747M-16a: Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A748/A748M-87(2012): Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A749/A749M-14: Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A751-14a: Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A753-08(2013): Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A754/A754M-11(2016): Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M-16e1: Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A756-09(2014)e1: Standard Specification for Stainless Anti-Friction Bearing Steel
A757/A757M-15: Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A758/A758M-14: Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A759-10(2016): Standard Specification for Carbon Steel Crane Rails
A760/A760M-15: Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761/A761M-17: Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A762/A762M-15: Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A763-15: Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A764-07(2012): Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A765/A765M-07(2017): Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A767/A767M-16: Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A768/A768M-05(2015): Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A769/A769M-05(2010): Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
A770/A770M-03(2012)e1: Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A772/A772M-00(2016): Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
A773/A773M-14: Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
A774/A774M-14: Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A775/A775M-17: Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A779/A779M-16: Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
A781/A781M-17: Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A786/A786M-15: Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A787/A787M-15a: Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A788/A788M-17: Standard Specification for Steel Forgings, General Requirements
A789/A789M-17: Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A790/A790M-16: Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A792/A792M-10(2015): Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A793-96(2014): Standard Specification for Rolled Floor Plate, Stainless Steel
A794/A794M-12: Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
A795/A795M-13: Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A796/A796M-17: Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A798/A798M-13: Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A799/A799M-10(2015): Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A800/A800M-14: Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A801-14: Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
A803/A803M-16: Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
A804/A804M-04(2015): Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A805/A805M-09(2016): Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A807/A807M-13: Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A809-08(2013): Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A810-01(2014): Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A811-15: Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
A813/A813M-14: Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814/A814M-15e1: Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A815/A815M-14e1: Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A817-12: Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A818-06(2016): Standard Specification for Coppered Carbon Steel Wire
A820/A820M-16: Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A821/A821M-15: Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
A822/A822M-04(2015): Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A823-99(2012): Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A824-01(2012): Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A827/A827M-14: Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A829/A829M-17: Standard Specification for Alloy Structural Steel Plates
A830/A830M-14: Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A832/A832M-10(2015)e1: Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A833-08a(2014): Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A834-95(2015): Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A835/A835M-10(2015): Standard Specification for Sizes of Ferroalloys and Alloy Additives
A836/A836M-14: Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A837/A837M-06(2016): Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A838-02(2013): Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
A839-15: Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications
A842-11a: Standard Specification for Compacted Graphite Iron Castings
A847/A847M-14: Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A848-01(2011): Standard Specification for Low-Carbon Magnetic Iron
A849-15: Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A853-04(2017): Standard Specification for Steel Wire, Carbon, for General Use
A854/A854M-08(2013): Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A855/A855M-03(2014): Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A856/A856M-03(2014): Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A857/A857M-07(2013): Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A858/A858M-14: Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A859/A859M-04(2014): Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A860/A860M-14: Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
A861-04(2013): Standard Specification for High-Silicon Iron Pipe and Fittings
A862/A862M-98(2014): Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A865/A865M-06(2012): Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A866-14: Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A867-03(2013): Standard Specification for Iron-Silicon Relay Steels
A871/A871M-14: Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A872/A872M-14: Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A874/A874M-98(2014): Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A875/A875M-13: Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A876-12: Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A877/A877M-17: Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
A878/A878M-05(2011): Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A879/A879M-12(2017): Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A881/A881M-16a: Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
A882/A882M-04a(2010): Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
A884/A884M-14: Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A886/A886M-16: Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A887-89(2014): Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A888-15: Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A889/A889M-14: Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
A890/A890M-13: Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A891/A891M-16: Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A892-09(2014)e1: Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A895-89(2009): Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A896/A896M-09(2014): Standard Practice for Conducting Case Studies on Galvanized Structures
A897/A897M-16: Standard Specification for Austempered Ductile Iron Castings
A898/A898M-07(2012): Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A899-91(2014): Standard Specification for Steel Wire, Epoxy-Coated
A90/A90M-13: Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A900/A900M-01(2012): Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
A901-12: Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
A903/A903M-99(2017): Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A904-14: Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
A905-04(2010): Standard Specification for Steel Wire, Pressure Vessel Winding
A906/A906M-02(2016): Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A908-03(2013): Standard Specification for Stainless Steel Needle Tubing
A909/A909M-06(2016): Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A910/A910M-16: Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
A911/A911M-15: Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties
A912/A912M-11: Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
A913/A913M-15: Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A914/A914M-16: Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A915/A915M-08(2013): Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A917-08(2015): Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A918-06(2011): Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A920/A920M-14: Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A921/A921M-93(2016): Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A922-05(2015): Standard Specification for Silicon Metal
A923-14: Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A924/A924M-16ae1: Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A925-03(2014): Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A927/A927M-11: Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
A928/A928M-14: Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A929/A929M-17: Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A930-09(2014): Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A931-08(2013): Standard Test Method for Tension Testing of Wire Ropes and Strand
A932/A932M-01(2012): Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
A934/A934M-16: Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A937/A937M-12: Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A938-07(2013): Standard Test Method for Torsion Testing of Wire
A939/A939M-15: Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A940/A940M-06(2016): Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A941-16: Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A942/A942M-95(2012)e1: Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
A943/A943M-01(2014): Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A944-10(2015): Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A945/A945M-16: Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A947M-16: Standard Specification for Textured Stainless Steel Sheet [Metric]
A949/A949M-01(2014): Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A950/A950M-11(2015): Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A951/A951M-16: Standard Specification for Steel Wire for Masonry Joint Reinforcement
A952/A952M-02(2016): Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A955/A955M-17: Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
A956-12: Standard Test Method for Leeb Hardness Testing of Steel Products
A957/A957M-15a: Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958/A958M-17: Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A959-16: Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A960/A960M-16a: Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A961/A961M-16a: Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A962/A962M-16b: Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
A964/A964M-17: Standard Specification for Corrugated Steel Box Culverts
A965/A965M-14: Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A966/A966M-15: Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A967/A967M-13: Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A968/A968M-96(2014): Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
A970/A970M-16: Standard Specification for Headed Steel Bars for Concrete Reinforcement
A971/A971M-10: Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
A972/A972M-00(2015): Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A973/A973M-07(2012): Standard Specification for Grade 100 Alloy Steel Chain
A974-97(2016): Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
A975-11(2016): Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A976-13: Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
A977/A977M-07(2013): Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
A978/A978M-08(2013): Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A979/A979M-03(2014)e1: Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A980/A980M-11: Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A981/A981M-11(2016): Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
A982/A982M-10(2015): Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A983/A983M-06(2016): Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A985/A985M-16: Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A986/A986M-01(2016): Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A987/A987M-09(2014): Standard Practice for Measuring Shape Characteristics of Tin Mill Products
A988/A988M-16: Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A989/A989M-15: Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A99-03(2014): Standard Specification for Ferromanganese
A990/A990M-14a: Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A991/A991M-17: Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A992/A992M-11(2015): Standard Specification for Structural Steel Shapes
A994-16: Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A995/A995M-13: Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A996/A996M-16: Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A997-08(2012): Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A998/A998M-12: Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
A999/A999M-16: Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
B1-13: Standard Specification for Hard-Drawn Copper Wire
B100-13: Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
B101-12: Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
B103/B103M-15: Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
B105-05(2012): Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
B106-08(2013): Standard Test Methods for Flexivity of Thermostat Metals
B107/B107M-13: Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
B108/B108M-15: Standard Specification for Aluminum-Alloy Permanent Mold Castings
B111/B111M-16: Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B114-07(2013): Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
B115-10(2016): Standard Specification for Electrolytic Copper Cathode
B116-95(2017): Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage
B117-16: Standard Practice for Operating Salt Spray (Fog) Apparatus
B121/B121M-16: Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
B122/B122M-16: Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B124/B124M-17: Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B127-05(2014): Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
B129-17: Standard Specification for Cartridge Brass Cartridge Case Cups
B130-13: Standard Specification for Commercial Bronze Strip for Bullet Jackets
B131-17: Standard Specification for Copper Alloy Bullet Jacket Cups
B134/B134M-15: Standard Specification for Brass Wire
B135-10: Standard Specification for Seamless Brass Tube
B135M-10: Standard Specification for Seamless Brass Tube [Metric]
B136-84(2013): Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
B137-95(2014): Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
B138/B138M-11(2017): Standard Specification for Manganese Bronze Rod, Bar, and Shapes
B139/B139M-12(2017): Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
B140/B140M-12(2017): Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
B148-14: Standard Specification for Aluminum-Bronze Sand Castings
B150/B150M-12(2017): Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
B151/B151M-13: Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B152/B152M-13: Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B153-11(2017): Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154-16: Standard Test Method for Mercurous Nitrate Test for Copper Alloys
B159/B159M-11: Standard Specification for Phosphor Bronze Wire
B16/B16M-10(2015): Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B160-05(2014): Standard Specification for Nickel Rod and Bar
B161-05(2014): Standard Specification for Nickel Seamless Pipe and Tube
B162-99(2014): Standard Specification for Nickel Plate, Sheet, and Strip
B163-11(2017): Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
B164-03(2014): Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B165-05(2014): Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube
B166-11: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,
B167-11(2016): Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube
B168-11(2016): Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip
B169/B169M-15: Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B170-99(2015): Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
B171/B171M-12: Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
B172-17: Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
B173-17: Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
B174-17: Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
B176-17: Standard Specification for Copper-Alloy Die Castings
B179-14: Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
B183-79(2014): Standard Practice for Preparation of Low-Carbon Steel for Electroplating
B187/B187M-16: Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
B188-15e1: Standard Specification for Seamless Copper Bus Pipe and Tube
B189-05(2015): Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
B19-15: Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
B193-16: Standard Test Method for Resistivity of Electrical Conductor Materials
B194-15: Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B196/B196M-07(2013)e1: Standard Specification for Copper-Beryllium Alloy Rod and Bar
B197/B197M-07(2013): Standard Specification for Copper-Beryllium Alloy Wire
B199-12: Standard Specification for Magnesium-Alloy Permanent Mold Castings
B2-13: Standard Specification for Medium-Hard-Drawn Copper Wire
B201-80(2014): Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
B206/B206M-12(2017): Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
B208-14: Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
B209-14: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M-14: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
B21/B21M-14: Standard Specification for Naval Brass Rod, Bar, and Shapes
B210-12: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B210M-12: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)
B211-12e1: Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B211M-12e1: Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)
B212-13: Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
B213-17: Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
B214-16: Standard Test Method for Sieve Analysis of Metal Powders
B215-15: Standard Practices for Sampling Metal Powders
B216-16: Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
B22/B22M-17: Standard Specification for Bronze Castings for Bridges and Turntables
B221-14: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B221M-13: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
B223-08(2013): Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
B224-16: Standard Classification of Coppers
B226-11(2016): Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
B227-15: Standard Specification for Hard-Drawn Copper-Clad Steel Wire
B228-11a(2016): Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
B229-12(2017): Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
B23-00(2014): Standard Specification for White Metal Bearing Alloys
B230/B230M-07(2016): Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes
B231/B231M-16: Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
B232/B232M-11: Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
B233-97(2016): Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
B234-10: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
B234M-10: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
B236-07(2015): Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
B236M-07(2015): Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric)
B237-01(2014): Standard Specification for Refined Antimony
B240-13: Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B241/B241M-16: Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B242-99(2014)e1: Standard Guide for Preparation of High-Carbon Steel for Electroplating
B243-16a: Standard Terminology of Powder Metallurgy
B246-15: Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
B247-15: Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
B247M-15: Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
B248-12: Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B248M-12: Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
B249/B249M-17: Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B250/B250M-16: Standard Specification for General Requirements for Wrought Copper Alloy Wire
B251-10: Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B251M-10: Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
B252-92(2014): Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
B253-11: Standard Guide for Preparation of Aluminum Alloys for Electroplating
B254-92(2014): Standard Practice for Preparation of and Electroplating on Stainless Steel
B258-14: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
B26/B26M-14e1: Standard Specification for Aluminum-Alloy Sand Castings
B263/B263M-14: Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
B265-15: Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B267-07(2013): Standard Specification for Wire for Use In Wire-Wound Resistors
B271/B271M-15: Standard Specification for Copper-Base Alloy Centrifugal Castings
B272-12: Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
B275-14: Standard Practice for Codification of Certain Zinc, Tin and Lead Die Castings
B276-05(2015): Standard Test Method for Apparent Porosity in Cemented Carbides
B277-95(2012): Standard Test Method for Hardness of Electrical Contact Materials
B279-13: Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
B280-16: Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B281-88(2013): Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
B283/B283M-17: Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B286-07(2012): Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
B29-14: Standard Specification for Refined Lead
B294-10: Standard Test Method for Hardness Testing of Cemented Carbides
B296-03(2014): Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
B298-12(2017): Standard Specification for Silver-Coated Soft or Annealed Copper Wire
B299-13: Standard Specification for Titanium Sponge
B3-13: Standard Specification for Soft or Annealed Copper Wire
B30-16: Standard Specification for Copper Alloys in Ingot Form
B301/B301M-13: Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
B302-12: Standard Specification for Threadless Copper Pipe, Standard Sizes
B306-13: Standard Specification for Copper Drainage Tube (DWV)
B308/B308M-10: Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B311-17: Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
B312-14: Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
B313/B313M-09: Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
B315-12: Standard Specification for Seamless Copper Alloy Pipe and Tube
B316/B316M-15: Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B317/B317M-07(2015)e1: Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
B319-91(2014): Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
B32-08(2014): Standard Specification for Solder Metal
B320-60(2013): Standard Practice for Preparation of Iron Castings for Electroplating
B322-99(2014): Standard Guide for Cleaning Metals Prior to Electroplating
B324-01(2016): Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
B327-16: Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
B329-14: Standard Test Method for
B33-10(2014): Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
B330-15: Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
B331-16: Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
B333-03(2013): Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
B335-03(2013): Standard Specification for Nickel-Molybdenum Alloy Rod
B338-14: Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
B339-12: Standard Specification for Pig Tin
B343-92a(2014): Standard Practice for Preparation of Nickel for Electroplating with Nickel
B344-14: Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
B345/B345M-11: Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
B348-13: Standard Specification for Titanium and Titanium Alloy Bars and Billets
B349/B349M-16: Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
B350/B350M-11(2016)e1: Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
B351/B351M-13: Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
B352/B352M-17: Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
B353-12(2017): Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
B354-16: Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
B355-11(2016): Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
B359/B359M-15: Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B36/B36M-13: Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B360-15: Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
B361-16: Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
B362-91(2016): Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
B363-14: Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
B364-96(2009): Standard Specification for Tantalum and Tantalum Alloy Ingots
B365-12: Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
B367-13: Standard Specification for Titanium and Titanium Alloy Castings
B369-09(2016): Standard Specification for Copper-Nickel Alloy Castings
B37-08(2013): Standard Specification for Aluminum for Use in Iron and Steel Manufacture
B370-12: Standard Specification for Copper Sheet and Strip for Building Construction
B371/B371M-15: Standard Specification for Copper-Zinc-Silicon Alloy Rod
B372-12a: Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
B379-11: Standard Specification for Phosphorized Coppers—Refinery Shapes
B381-13: Standard Specification for Titanium and Titanium Alloy Forgings
B386-03(2011): Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
B387-10: Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
B388-06(2012): Standard Specification for Thermostat Metal Sheet and Strip
B389-81(2016): Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
B39-79(2013): Standard Specification for Nickel
B391-09e1: Standard Specification for Niobium and Niobium Alloy Ingots
B392-09e1: Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
B393-09e1: Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
B394-09e1: Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
B395/B395M-16: Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
B398/B398M-15: Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes
B399/B399M-04(2015): Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
B400/B400M-14: Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
B401-12(2016): Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
B403-12: Standard Specification for Magnesium-Alloy Investment Castings
B406-96(2015): Standard Test Method for Transverse Rupture Strength of Cemented Carbides
B407-08a(2014): Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
B408-06(2016): Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B409-06(2016): Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
B411/B411M-14: Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
B413-97a(2017): Standard Specification for Refined Silver
B415-16: Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
B416-98(2013): Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B417-13: Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
B418-16a: Standard Specification for Cast and Wrought Galvanic Zinc Anodes
B42-15a: Standard Specification for Seamless Copper Pipe, Standard Sizes
B422/B422M-17: Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
B423-11(2016): Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy
B424-11(2016): Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and
B425-11: Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar
B427-09(2015): Standard Specification for Gear Bronze Alloy Castings
B428-09(2013): Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
B429/B429M-10e1: Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B43-15: Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B432-14: Standard Specification for Copper and Copper Alloy Clad Steel Plate
B434-06(2016): Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242) Plate, Sheet, and Strip
B435-06(2016): Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
B438-17: Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B439-12: Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B440-12: Standard Specification for Cadmium
B441-16: Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
B443-00(2014): Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy
B444-16e1: Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys
B446-03(2014): Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
B447-12a: Standard Specification for Welded Copper Tube
B449-93(2015): Standard Specification for Chromates on Aluminum
B452-09(2015): Standard Specification for Copper-Clad Steel Wire for Electronic Application
B453/B453M-11e1: Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
B455-10: Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
B457-67(2013): Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
B462-15: Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045, UNS N06025, UNS R20033 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
B463-10(2016): Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip
B465-16: Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B466/B466M-14: Standard Specification for Seamless Copper-Nickel Pipe and Tube
B467-14: Standard Specification for Welded Copper-Nickel Pipe
B468-10(2016): Standard Specification for Welded UNS N08020 Alloy Tubes
B47-95a(2017): Standard Specification for Copper Trolley Wire
B470-02(2017): Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
B472-10(2015): Standard Specification for Nickel Alloy Billets and Bars for Reforging
B473-07(2013): Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B475-07(2013): Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
B476-01(2017): Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
B477-97(2017): Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
B478-85(2016): Standard Test Method for Cross Curvature of Thermostat Metals
B48-00(2016): Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
B480-88(2010): Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
B481-68(2013): Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
B482-85(2013): Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
B483/B483M-13e1: Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
B489-85(2013): Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
B49-17: Standard Specification for Copper Rod for Electrical Purposes
B491/B491M-15: Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
B493/B493M-14: Standard Specification for Zirconium and Zirconium Alloy Forgings
B494/B494M-08(2014): Standard Specification for Primary Zirconium
B495-10: Standard Specification for Zirconium and Zirconium Alloy Ingots
B496-16: Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
B497-00(2012): Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
B498/B498M-08(2016): Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
B499-09(2014): Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
B5-16: Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
B500/B500M-12: Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
B501-10(2015): Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
B502/B502M-10(2017): Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors
B505/B505M-14: Standard Specification for Copper Alloy Continuous Castings
B506-16: Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
B508-16: Standard Specification for Copper Alloy Strip for Flexible Metal Hose
B512-04(2014): Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
B514-05(2014): Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
B515-95(2014): Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and
B516-15: Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes
B517-05(2014): Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
B520-12(2017): Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
B521-12: Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
B522-01(2017): Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
B523/B523M-12a: Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
B524/B524M-99(2016): Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
B527-15: Standard Test Method for Tap Density of Metal Powders and Compounds
B528-16: Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
B530-09(2014): Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
B534-14e1: Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B535-06(2017): Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
B536-07(2013): Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
B539-02(2013): Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
B540-97(2012): Standard Specification for Palladium Electrical Contact Alloy
B541-01(2012): Standard Specification for Gold Electrical Contact Alloy
B542-13: Standard Terminology Relating to Electrical Contacts and Their Use
B543/B543M-12: Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
B546-04(2014): Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
B547/B547M-10: Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
B548-03(2009): Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
B549-13: Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors
B550/B550M-07(2012): Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
B551/B551M-12: Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
B552-12: Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
B557-15: Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B557M-15: Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
B558-79(2013): Standard Practice for Preparation of Nickel Alloys for Electroplating
B559-12(2017): Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
B560-00(2014): Standard Specification for Modern Pewter Alloys
B561-94(2012): Standard Specification for Refined Platinum
B562-95(2012): Standard Specification for Refined Gold
B563-01(2017): Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
B564-15: Standard Specification for Nickel Alloy Forgings
B565-04(2015): Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
B566-04a(2016): Standard Specification for Copper-Clad Aluminum Wire
B569-14: Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
B570-16: Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
B572-06(2016): Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
B573-06(2016): Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod
B574-15: Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
B575-15e1: Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip
B576-94(2016): Standard Guide for Arc Erosion Testing of Electrical Contact Materials
B577-16: Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
B580-79(2014): Standard Specification for Anodic Oxide Coatings on Aluminum
B581-02(2013)e1: Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
B582-07(2013): Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
B584-14: Standard Specification for Copper Alloy Sand Castings for General Applications
B587-12: Standard Specification for Welded Brass Tube
B589-94(2012): Standard Specification for Refined Palladium
B591-15: Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
B592-15: Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B593-96(2014)e1: Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
B594-13: Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
B595-11(2016): Standard Specification for Sintered Aluminum Structural Parts
B596-89(2017): Standard Specification for Gold-Copper Alloy Electrical Contact Material
B598-14a: Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
B599-92(2014): Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
B6-13: Standard Specification for Zinc
B600-11(2017): Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
B601-16: Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
B603-07(2013): Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
B606/B606M-08(2016): Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B608-11: Standard Specification for Welded Copper-Alloy Pipe
B609/B609M-12(2016): Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
B61-15: Standard Specification for Steam or Valve Bronze Castings
B610-13: Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
B613-76(2012): Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
B614-16: Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
B615-79(2017): Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
B616-96(2012): Standard Specification for Refined Rhodium
B617-98(2016): Standard Specification for Coin Silver Electrical Contact Alloy
B618/B618M-14: Standard Specification for Aluminum-Alloy Investment Castings
B62-17: Standard Specification for Composition Bronze or Ounce Metal Castings
B620-03(2013): Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
B621-02(2016): Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
B622-15e1: Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B624-07(2012): Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
B625-14: Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926,
B626-15: Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
B628-98(2016): Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
B629-77(2013): Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
B63-07(2013): Standard Test Method for Resistivity of Metallically Conducting Resistance and
B630-88(2010): Standard Practice for Preparation of Chromium for Electroplating with Chromium
B631-93(2016): Standard Specification for Silver-Tungsten Electrical Contact Materials
B632/B632M-15: Standard Specification for Aluminum-Alloy Rolled Tread Plate
B637-16: Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
B639-02(2013): Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
B640-12a: Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
B643-12(2016): Standard Specification for Copper-Beryllium Alloy Seamless Tube
B644-11(2017): Standard Specification for Copper Alloy Addition Agents
B645-10(2015): Standard Practice for Linear-Elastic Plane–Strain Fracture Toughness Testing of Aluminum Alloys
B646-12: Standard Practice for Fracture Toughness Testing of Aluminum Alloys
B647-10(2016): Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
B648-10(2015)e1: Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B649-06(2016): Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925,
B652/B652M-10: Standard Specification for Niobium-Hafnium Alloy Ingots
B653/B653M-11(2016): Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
B654/B654M-10: Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
B655/B655M-10: Standard Specification for Niobium-Hafnium Alloy Bar and Wire
B657-11: Guide for Metallographic Identification of Microstructure in Cemented Carbides
B658/B658M-11(2016): Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
B66-15: Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
B660-15: Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
B661-12: Standard Practice for Heat Treatment of Magnesium Alloys
B662-94(2012): Standard Specification for Silver-Molybdenum Electrical Contact Material
B664-90(2012): Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material
B665-08(2012): Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
B666/B666M-15: Standard Practice for Identification Marking of Aluminum and Magnesium Products
B667-97(2014): Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
B668-14: Standard Specification for UNS N08028 and N08029 Seamless Pipe and Tube
B67-14: Standard Specification for Car and Tender Journal Bearings, Lined
B670-07(2013): Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
B671-81(2017): Standard Specification for Refined Iridium
B672-02(2013): Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
B673-05(2016): Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
B674-05(2016): Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
B675-02(2013): Standard Specification for UNS N08367 Welded Pipe
B676-03(2014): Standard Specification for UNS N08367 Welded Tube
B677-05(2016): Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
B678-86(2011): Standard Test Method for Solderability of Metallic-Coated Products
B68/B68M-11: Standard Specification for Seamless Copper Tube, Bright Annealed
B680-80(2014): Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
B682-01(2016): Standard Specification for Standard Metric Sizes of Electrical Conductors
B683-01(2012): Standard Specification for Pure Palladium Electrical Contact Material
B685-01(2012): Standard Specification for Palladium-Copper Electrical Contact Material
B686/B686M-14: Standard Specification for Aluminum Alloy Castings, High-Strength
B687-99(2016): Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
B688-96(2014): Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
B69-16: Standard Specification for Rolled Zinc
B690-02(2013): Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
B691-02(2013): Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
B692-90(2012): Standard Specification for 75 % Silver-25 % % Graphite Sliding Contact Material
B693-91(2012): Standard Specification for Silver-Nickel Electrical Contact Materials
B694-13: Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
B695-04(2016): Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B696-00(2015): Standard Specification for Coatings of Cadmium Mechanically Deposited
B699-86(2015): Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
B70-90(2013): Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
B701/B701M-13: Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
B702-93(2015): Standard Specification for Copper-Tungsten Electrical Contact Material
B703-10: Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
B704-03(2014): Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
B705-05(2014): Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
B706-00(2011): Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
B708-12: Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
B709-17: Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and Strip
B710-04(2015): Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
B711-13: Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
B717-96(2012): Standard Specification for Refined Ruthenium
B718-00(2016): Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
B719-00(2014): Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-
B722-06(2016): Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
B723-00(2014): Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
B725-05(2014)e1: Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
B726-02(2016): Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
B729-05(2014): Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
B730-08(2013): Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
B731-96(2012): Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material
B735-16: Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
B737-10(2015): Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
B738-13: Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
B739-03(2013): Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
B740-09(2015): Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
B742-90(2012): Standard Specification for Fine Silver Electrical Contact Fabricated Material
B743-12: Standard Specification for Seamless Copper Tube in Coils
B744/B744M-15: Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
B745/B745M-15: Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
B746/B746M-16: Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
B747-15: Standard Specification for Copper-Zirconium Alloy Sheet and Strip
B749-14: Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
B75/B75M-11: Standard Specification for Seamless Copper Tube
B750-16: Standard Specification for GALFAN
B751-08(2013): Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
B752-06(2011)e2: Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
B753-07(2013): Standard Specification for Thermostat Component Alloys
B754-10(2015)e1: Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
B755-00(2016): Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys
B756-00(2016): Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy
B757-00(2016): Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys
B758-00(2016): Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys
B759-00(2016): Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys
B76-90(2013): Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
B760-07(2013): Standard Specification for Tungsten Plate, Sheet, and Foil
B761-06(2011): Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
B763/B763M-15: Standard Specification for Copper Alloy Sand Castings for Valve Applications
B768-11(2016): Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
B769-11(2016): Standard Test Method for Shear Testing of Aluminum Alloys
B77-07(2013): Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
B770-15: Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
B771-11(2017): Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
B772-97(2012): Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
B774-00(2014): Standard Specification for Low Melting Point Alloys
B776-12: Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
B777-15: Standard Specification for Tungsten Base, High-Density Metal
B778-14: Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
B779-14: Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
B78-90(2013): Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
B780-16: Standard Specification for 75 % Silver, 24.5 % Copper, 0.5 % Nickel Electrical Contact Alloy
B781-93a(2012): Standard Guide for Silver-Cadmium Oxide Contact Material
B783-13: Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
B784-01(2017)e1: Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
B786/B786M-08(2013)e1: Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
B787/B787M-04(2014): Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
B788/B788M-09(2014): Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B789/B789M-16: Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
B790/B790M-16: Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
B792-16: Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
B793-16: Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
B794-97(2015): Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
B795-13: Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
B796-14: Standard Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications
B797-15: Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
B798-95(2014): Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
B799-95(2014): Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
B8-11(2017): Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
B80-15: Standard Specification for Magnesium-Alloy Sand Castings
B800-05(2015): Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
B801-16: Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
B802/B802M-10(2016): Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B803/B803M-08(2016): Standard Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
B804-02(2013): Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
B805-06(2017)e1: Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
B806-14: Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
B807/B807M-13: Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
B808-10(2015): Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
B810-01a(2017): Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
B811-13e1: Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
B812-96(2013): Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
B813-16: Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
B814-06(2016): Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy
B815-02(2016): Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy
B818-03(2013): Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy
B819-00(2011): Standard Specification for Seamless Copper Tube for Medical Gas Systems
B820-14a: Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
B821-10(2016): Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
B822-17: Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
B823-15: Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
B824-17: Standard Specification for General Requirements for Copper Alloy Castings
B825-13: Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
B826-09(2015): Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
B827-05(2014): Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
B828-16: Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
B829-04a(2017): Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
B830-11: Standard Specification for Uniform Test Methods and Frequency
B831-14: Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
B833-13: Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
B834-15: Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts
B835-14: Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
B836-00(2015): Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
B837-10: Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
B84-07(2013): Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
B841-99(2010): Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
B843-13: Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
B844-98(2016): Standard Guide for Silver-Tin Oxide Contact Material
B845-97(2013)e1: Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
B846-11a: Standard Terminology for Copper and Copper Alloys
B848-15: Standard Specification for Powder Forged (PF) Ferrous Materials
B849-02(2013): Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
B85/B85M-14: Standard Specification for Aluminum-Alloy Die Castings
B850-98(2015): Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
B851-04(2014): Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
B852-16: Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
B853-16: Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
B854-98(2016): Standard Guide for Measuring Electrical Contact Intermittences
B855-11: Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
B856-13: Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
B857-14: Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
B858-06(2012): Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B859-13: Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
B86-13: Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B860-16: Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
B861-14: Standard Specification for Titanium and Titanium Alloy Seamless Pipe
B862-14: Standard Specification for Titanium and Titanium Alloy Welded Pipe
B863-14: Standard Specification for Titanium and Titanium Alloy Wire
B864/B864M-13: Standard Specification for Corrugated Aluminum Box Culverts
B865-04(2015): Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy
B869-07(2013): Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
B870-08(2014): Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
B871-01(2013): Standard Test Method for Tear Testing of Aluminum Alloy Products
B872-06(2016): Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
B873-17: Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
B878-97(2014): Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
B879-97(2013): Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
B88-16: Standard Specification for Seamless Copper Water Tube
B880-14: Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
B881-09: Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
B882-10: Specification for Pre-Patinated Copper for Architectural Applications
B883-15: Standard Specification for Metal Injection Molded (MIM) Materials
B884-11: Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
B885-09(2015): Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
B886-12: Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
B887-12: Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
B888/B888M-17: Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
B88M-16: Standard Specification for Seamless Copper Water Tube (Metric)
B890-07(2012): Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
B891-12: Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
B892-10(2015): Standard Specification for ACuZinc5
B893-98(2013): Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
B894-10(2015): Standard Specification for ACuZinc5
B895-16: Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
B896-10(2015): Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
B897-13: Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot
B898-11(2016): Standard Specification for Reactive and Refractory Metal Clad Plate
B899-16: Standard Terminology Relating to Non-ferrous Metals and Alloys
B9-76(2017): Standard Specification for Bronze Trolley Wire
B90/B90M-15: Standard Specification for Magnesium-Alloy Sheet and Plate
B900-16: Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
B901-04(2015): Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
B902/B902M-13e1: Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
B903-15: Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
B906-02(2012): Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
B907-16: Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
B908-14: Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
B909-00(2011): Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
B91-12: Standard Specification for Magnesium-Alloy Forgings
B910/B910M-07(2013): Standard Specification for Annealed Copper-Clad Steel Wire
B911/B911M-12(2016): Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
B912-02(2013): Standard Specification for Passivation of Stainless Steels Using Electropolishing
B913-05(2015): Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
B914-13e1: Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
B917/B917M-12: Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
B918/B918M-09: Standard Practice for Heat Treatment of Wrought Aluminum Alloys
B919-12: Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
B92/B92M-11: Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
B920-16: Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
B921-08(2013): Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
B922-17: Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
B923-16: Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
B924-02(2017): Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
B925-15: Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
B926-09: Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
B927/B927M-17: Standard Specification for Brass Rod, Bar, and Shapes
B928/B928M-15: Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
B929-05(2011)e1: Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
B93/B93M-15: Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
B930-03(2017): Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
B931-14: Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
B933-16: Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
B934-15: Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
B935-16: Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
B936-13: Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
B937-15: Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
B939-15: Standard Test Method for Radial Crushing Strength,
B94-13: Standard Specification for Magnesium-Alloy Die Castings
B940-05(2014): Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
B941-16: Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
B942-10(2015): Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
B943-16: Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
B944-11(2016): Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
B945-06(2014): Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers
B946-11(2016): Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products
B947-14: Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
B949-13: Standard Specification for General Requirements for Zinc and Zinc Alloy Products
B950-16: Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
B951-11: Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
B952/B952M-14: Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
B953-13: Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
B954-15: Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
B955/B955M-14: Standard Specification for Aluminum-Alloy Centrifugal Castings
B956/B956M-10e1: Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
B957/B957M-16: Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
B958/B958M-16: Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
B96/B96M-16: Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
B960-13: Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
B961-13: Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
B962-17: Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
B963-17: Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
B964-16: Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
B965-09(2014): Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
B967/B967M-16: Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
B968/B968M-16: Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
B969/B969M-14: Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes
B971-10(2014): Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
B972-10(2014): Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
B973-10(2014): Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
B974/B974M-16: Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
B976-11(2015): Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
B977-13: Standard Specification for Titanium and Titanium Ingots
B979-12: Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors
B98/B98M-13: Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
B981/B981M-12: Standard Specification for Low Leaded Brass Rod, Bar and Shapes
B982-14e1: Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
B983-16: Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
B985-12(2016): Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
B986-13e1: Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
B988-13: Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
B99/B99M-15: Standard Specification for Copper-Silicon Alloy Wire for General Applications
C1277-15: Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1540-15: Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1541-12: Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
C1563-08(2013): Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
C1582/C1582M-11: Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
C564-14: Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C660-81(2015): Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
C692-13: Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C760-90(2015): Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
C847-14a: Standard Specification for Metal Lath
C876-15: Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
C933-14: Standard Specification for Welded Wire Lath
C991-16: Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
D1730-09(2014): Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
D1731-09(2014): Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
D1732-03(2013): Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
D1977-16: Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
D2201-99(2011): Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
D2229-10(2014): Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
D2651-01(2016): Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
D2969-04(2014): Standard Test Methods for Steel Tire Cords
D3933-98(2010): Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
D3953-15: Standard Specification for Strapping, Flat Steel and Seals
D4340-10: Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
D4698-92(2013): Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
D4975-14: Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel
D5502-00(2015): Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
D5861-07(2013): Standard Guide for Significance of Particle Size Measurements of Coating Powders
D5933-96(2013): Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
D609-00(2012): Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
D6208-07(2014): Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
D6255/D6255M-05(2011): Standard Specification for Steel or Aluminum Slotted Angle Crates
D6320/D6320M-10(2014): Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
D6353-06(2017)e1: Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
D6354-12: Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
D7206/D7206M-06(2013)e1: Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
D7659-10(2015): Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
D7893-13: Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
D849-15: Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
E10-15a: Standard Test Method for Brinell Hardness of Metallic Materials
E1010-16: Standard Practice for Preparation of Disk Specimens of Steel and Iron by Remelting for Spectrochemical Analysis
E1019-11: Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
E103-12: Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
E1032-12: Standard Test Method for Radiographic Examination of Weldments
E1033-13: Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature
E1070-11: Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
E1077-14: Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
E1085-16: Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E1086-14: Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
E110-14: Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
E111-04(2010): Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
E112-13: Standard Test Methods for Determining Average Grain Size
E1158-14: Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material
E1180-08(2014): Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
E1181-02(2015): Standard Test Methods for Characterizing Duplex Grain Sizes
E1221-12a: Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness,
E1245-03(2016): Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
E125-63(2013): Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
E1251-11: Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
E1255-16: Standard Practice for Radioscopy
E1268-01(2016): Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
E127-15: Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks
E1277-14: Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
E1282-11(2016): Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
E1297-08(2013): Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
E1304-97(2014): Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
E1306-11: Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
E1312-09(2013)e1: Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
E132-04(2010): Standard Test Method for Poisson's Ratio at Room Temperature
E1320-15: Standard Reference Radiographs for Titanium Castings
E1335-08(2017): Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
E1338-09(2015): Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases
E135-16: Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
E1351-01(2012): Standard Practice for Production and Evaluation of Field Metallographic Replicas
E1382-97(2015): Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
E139-11: Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E140-12be1: Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
E1409-13: Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
E1416-16a: Standard Practice for Radioscopic Examination of Weldments
E143-13: Standard Test Method for Shear Modulus at Room Temperature
E1444/E1444M-16e1: Standard Practice for Magnetic Particle Testing
E1446-13: Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry
E1447-09(2016): Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
E1450-16: Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
E1457-15: Standard Test Method for Measurement of Creep Crack Growth Times in Metals
E1473-16: Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys
E1476-04(2014): Standard Guide for Metals Identification, Grade Verification, and Sorting
E155-15: Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
E1552-15: Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry
E1558-09(2014): Standard Guide for Electrolytic Polishing of Metallographic Specimens
E1569-09: Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique
E1571-11(2016)e1: Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
E1587-10: Standard Test Methods for Chemical Analysis of Refined Nickel
E159-17: Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
E1615-16: Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
E164-13: Standard Practice for Contact Ultrasonic Testing of Weldments
E1648-15: Standard Reference Radiographs for Examination of Aluminum Fusion Welds
E1659-12: Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
E1681-03(2013): Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
E1734-16a: Standard Practice for Radioscopic Examination of Castings
E1793-11: Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E18-16: Standard Test Methods for Rockwell Hardness of Metallic Materials
E1801-15: Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1806-09(2016): Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
E1814-14: Standard Practice for Computed Tomographic (CT) Examination of Castings
E1820-16: Standard Test Method for Measurement of Fracture Toughness
E1823-13: Standard Terminology Relating to Fatigue and Fracture Testing
E1826-12: Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
E1833-07a(2013)e1: Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
E1834-11: Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
E1835-14: Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
E1852-13: Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
E186-15: Standard Reference Radiographs for Heavy-Walled (2 to 4
E1875-13: Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
E1876-15: Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
E190-14: Standard Test Method for Guided Bend Test for Ductility of Welds
E1915-13: Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
E1916-11: Standard Guide for Identification of Mixed Lots of Metals
E1917-13: Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
E1920-03(2014): Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings
E1921-17a: Standard Test Method for Determination of Reference Temperature,
E1928-13: Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
E1938-13: Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
E194-10(2015): Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
E1941-10(2016): Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
E1951-14: Standard Guide for Calibrating Reticles and Light Microscope Magnifications
E1955-04(2014): Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM
E1999-11: Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
E2001-13: Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
E2027-09: Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials
E208-06(2012): Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
E209-00(2010): Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
E21-09: Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E2109-01(2014): Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
E213-14e1: Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
E2142-08(2015): Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
E2207-15: Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
E2209-13: Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry
E2218-15: Standard Test Method for Determining Forming Limit Curves
E2244-11e1: Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2245-11e1: Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2246-11e1: Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2248-15: Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
E2283-08(2014): Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
E2298-15: Standard Test Method for Instrumented Impact Testing of Metallic Materials
E23-16b: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
E2349-12: Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
E2368-10: Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
E2371-13: Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
E2375-16: Standard Practice for Ultrasonic Testing of Wrought Products
E238-17a: Standard Test Method for Pin-Type Bearing Test of Metallic Materials
E2422-11: Standard Digital Reference Images for Inspection of Aluminum Castings
E2444-11e1: Terminology Relating to Measurements Taken on Thin, Reflecting Films
E2448-11e1: Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
E2465-13: Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E2472-12e1: Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
E2492-07(2012): Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
E252-06(2013): Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
E2534-15: Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
E2546-15: Standard Practice for Instrumented Indentation Testing
E255-07(2014): Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E2567-16a: Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
E2594-09(2014): Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
E2626-08e1: Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
E2627-13: Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
E263-13: Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
E264-08(2013): Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
E266-11: Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
E2669-16e1: Standard Digital Reference Images for Titanium Castings
E2685-15: Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test
E2712-15: Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet
E2714-13: Standard Test Method for Creep-Fatigue Testing
E272-15: Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
E2760-16: Standard Test Method for Creep-Fatigue Crack Growth Testing
E2775-16: Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
E2789-10(2015): Standard Guide for Fretting Fatigue Testing
E2792-13: Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
E280-15: Standard Reference Radiographs for Heavy-Walled (4
E2818-11: Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
E2823-17: Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
E2824-11: Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
E2860-12: Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
E2863-12: Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
E2869-13: Standard Digital Reference Images for Magnesium Castings
E2899-15: Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
E290-14: Standard Test Methods for Bend Testing of Material for Ductility
E292-09e1: Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
E2929-13: Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction
E3-11: Standard Guide for Preparation of Metallographic Specimens
E310-15: Standard Reference Radiographs for Tin Bronze Castings
E32-15: Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
E322-12: Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E328-13: Standard Test Methods for Stress Relaxation Tests for Materials and Structures
E34-11e1: Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
E340-15: Standard Practice for Macroetching Metals and Alloys
E345-16: Standard Test Methods of Tension Testing of Metallic Foil
E350-12: Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E351-13: Standard Test Methods for Chemical Analysis of Cast Iron—All Types
E352-13: Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E353-14: Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
E354-14: Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
E363-16: Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
E367-16: Standard Test Methods for Chemical Analysis of Ferroniobium
E37-05(2011): Standard Test Methods for Chemical Analysis of Pig Lead
E372-13: Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration
E381-01(2012): Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E384-16: Standard Test Method for Microindentation Hardness of Materials
E390-15: Standard Reference Radiographs for Steel Fusion Welds
E396-12e1: Standard Test Methods for Chemical Analysis of Cadmium
E399-12e3: Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K
E407-07(2015)e1: Standard Practice for Microetching Metals and Alloys
E415-15: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
E428-08(2013): Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing
E436-03(2014): Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
E439-10: Standard Test Methods for Chemical Analysis of Beryllium
E446-15: Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
E45-13: Standard Test Methods for Determining the Inclusion Content of Steel
E466-15: Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
E468-11: Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
E478-08(2017): Standard Test Methods for Chemical Analysis of Copper Alloys
E481-16: Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
E50-11(2016): Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E505-15: Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
E517-00(2010): Standard Test Method for Plastic Strain Ratio r for Sheet Metal
E523-16: Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
E526-08(2013): Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
E53-07(2013): Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E536-16: Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
E539-11: Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
E55-11: Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
E561-15a: Standard Test Method for
E562-11: Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
E570-15e1: Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
E571-12: Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
E572-13: Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E581-10: Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
E588-03(2014): Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
E592-15: Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates
E6-15: Standard Terminology Relating to Methods of Mechanical Testing
E60-11(2016): Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
E604-15: Standard Test Method for Dynamic Tear Testing of Metallic Materials
E606/E606M-12: Standard Test Method for Strain-Controlled Fatigue Testing
E618-07(2013): Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
E633-13: Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
E634-12: Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry
E643-15: Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
E646-16: Standard Test Method for Tensile Strain-Hardening Exponents (
E647-15e1: Standard Test Method for Measurement of Fatigue Crack Growth Rates
E689-15: Standard Reference Radiographs for Ductile Iron Castings
E693-12e1: Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA)
E7-15: Standard Terminology Relating to Metallography
E709-15: Standard Guide for Magnetic Particle Testing
E712-80(2009): Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems
E716-16: Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
E740/E740M-03(2016): Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
E745-80(2009): Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems
E766-14e1: Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
E768-99(2010)e1: Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
E8/E8M-16a: Standard Test Methods for Tension Testing of Metallic Materials
E802-15: Standard Reference Radiographs for Gray Iron Castings Up to 4
E81-96(2011): Standard Test Method for Preparing Quantitative Pole Figures
E826-14: Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
E837-13a: Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
E855-08(2013): Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
E864-12: Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E866-11: Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E874-11: Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E88-11: Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
E883-11: Standard Guide for Reflected–Light Photomicrography
E9-09: Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
E915-16: Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
E930-99(2015): Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
E94-04(2010): Standard Guide for Radiographic Examination
E942-16: Standard Guide for Investigating the Effects of Helium in Irradiated Metals
E963-95(2010): Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
E975-13: Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
E977-05(2014): Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
E986-04(2010): Standard Practice for Scanning Electron Microscope Beam Size Characterization
F1043-17: Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
F1044-05(2011)e1: Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
F1058-16: Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
F106-12: Standard Specification for Brazing Filler Metals for Electron Devices
F1076-87(2015)e1: Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
F1083-16: Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
F1091-12: Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
F1092-14: Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
F1108-14: Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
F1111-08b(2013): Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
F1113-87(2011): Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
F1147-05(2011): Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
F1160-14: Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
F1182-07(2013): Standard Specification for Anodes, Sacrificial Zinc Alloy
F1183-96(2011): Standard Specification for Aluminum Alloy Chain Link Fence Fabric
F1267-15: Standard Specification for Metal, Expanded, Steel
F1269-13: Standard Test Methods for Destructive Shear Testing of Ball Bonds
F1295-16: Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
F1311-90(2012): Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges
F1314-13ae1: Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
F1325-91(2016): Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
F1345-10a(2015): Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
F1350-15: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
F136-13: Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
F1377-13: Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
F138-13a: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
F139-12: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
F1466-99(2015): Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
F1472-14: Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
F15-04(2013): Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
F1537-11: Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
F1554-15e1: Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
F1575-17: Standard Test Method for Determining Bending Yield Moment of Nails
F1580-12: Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
F1586-13e1: Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
F16-12: Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
F1624-12: Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
F1664-08(2013): Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
F1665-08(2013): Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
F1684-06(2016): Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
F1710-08(2016): Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
F1713-08(2013): Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
F1744-96(2016): Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
F18-12: Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices
F180-94(2015): Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
F1800-12: Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
F1801-97(2014): Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
F1813-13: Standard Specification for Wrought Titanium–12 Molybdenum–6 Zirconium–2 Iron Alloy for Surgical Implant (UNS R58120)
F19-11(2016): Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
F1978-12: Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
F2004-16: Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
F2005-05(2015): Standard Terminology for Nickel-Titanium Shape Memory Alloys
F2009-00(2011): Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
F2033-12: Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
F204-76(2013): Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire
F205-94(2015): Standard Test Method for Measuring Diameter of Fine Wire by Weighing
F2063-12: Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
F2066-13e1: Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
F2068-15: Standard Specification for Femoral Prostheses—Metallic Implants
F2146-13: Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
F2180-17: Standard Specification for Metallic Implantable Strands and Cables
F2181-14: Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
F219-96(2013): Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps
F2215-15: Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
F2229-12: Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
F2247-11(2017): Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
F2257-14: Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
F2281-04(2012): Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
F2282-15: Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
F2384-10(2016): Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
F2408-16: Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
F2443-04(2012): Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
F2459-12: Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
F2482-08(2015): Standard Specification for Load-Indicating Externally Threaded Fasteners
F2511-05(2013): Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
F2514-08(2014): Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
F2516-14: Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
F2527-16: Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
F256-05(2015): Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
F2581-12: Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
F2589-16: Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
F2633-13: Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
F2660-13: Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
F269-60(2014): Standard Test Method for Sag of Tungsten Wire
F2832-11(2016): Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
F2877/F2877M-13e1: Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
F288-96(2014): Standard Specification for Tungsten Wire for Electron Devices and Lamps
F2882-12: Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength
F2882M-12: Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric]
F2885-11: Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
F2886-10: Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
F289-96(2014): Standard Specification for Molybdenum Wire and Rod for Electronic Applications
F2895-15: Standard Practice for Digital Radiography of Cast Metallic Implants
F29-97(2012): Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications
F290-94(2015): Standard Specification for Round Wire for Winding Electron Tube Grid Laterals
F2936-12: Standard Specification for Chocks, Ship Mooring, Cast Steel
F2957-13: Standard Specification for Ornamental Aluminum Fence Systems
F2989-13: Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications
F30-96(2012): Standard Specification for Iron-Nickel Sealing Alloys
F3046-13: Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)
F31-16: Standard Specification for Nickel-Chromium-Iron Sealing Alloys
F364-96(2014): Standard Specification for Molybdenum Flattened Wire for Electron Tubes
F375-89(2015): Standard Specification for Integrated Circuit Lead Frame Material
F382-14: Standard Specification and Test Method for Metallic Bone Plates
F384-17: Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
F432-13: Standard Specification for Roof and Rock Bolts and Accessories
F44-16: Standard Specification for Metallized Surfaces on Ceramic
F458-13: Standard Practice for Nondestructive Pull Testing of Wire Bonds1,2
F459-13: Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
F467-13e2: Standard Specification for Nonferrous Nuts for General Use
F467M-06a(2012): Standard Specification for Nonferrous Nuts for General Use (Metric)
F468-16: Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
F468M-06(2012): Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
F487-13: Standard Specification for Fine Aluminum–1 % Silicon Wire for Semiconductor Lead-Bonding
F541-12: Standard Specification for Alloy Steel Eyebolts
F543-17: Standard Specification and Test Methods for Metallic Medical Bone Screws
F547-06(2012): Standard Terminology of Nails for Use with Wood and Wood-Base Materials
F560-13e1: Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
F562-13: Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
F564-10(2015): Standard Specification and Test Methods for Metallic Bone Staples
F593-13ae1: Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F594-09(2015): Standard Specification for Stainless Steel Nuts
F601-13: Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
F620-11(2015): Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition
F621-12: Standard Specification for Stainless Steel Forgings for Surgical Implants
F629-15: Standard Practice for Radiography of Cast Metallic Surgical Implants
F668-17: Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
F67-13(2017): Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
F68-16: Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
F680-80(2012): Standard Test Methods for Nails
F682-82a(2014): Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
F688-14: Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
F7-95(2016): Standard Specification for Aluminum Oxide Powder
F73-96(2013): Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
F746-04(2014): Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
F75-12: Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
F799-11: Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
F83-71(2013): Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters
F835-16: Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
F836M-16: Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)
F837-13e1: Standard Specification for Stainless Steel Socket Head Cap Screws
F837M-16: Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
F844-07a(2013): Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
F85-76(2013): Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
F86-13: Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
F879-15: Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
F879M-16: Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
F880-12: Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
F880M-16: Standard Specification for Stainless Steel Socket Set Screws (Metric)
F899-12b: Standard Specification for Wrought Stainless Steels for Surgical Instruments
F90-14: Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
F901-01(2012): Standard Specification for Aluminum Transmission Tower Bolts and Nuts
F912-11: Standard Specification for Alloy Steel Socket Set Screws
F959-15: Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
F96-77(2015): Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms
F961-14: Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
G1-03(2011): Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
G100-89(2015): Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
G101-04(2015): Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
G102-89(2015)e1: Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
G103-97(2016): Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution
G106-89(2015): Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
G107-95(2015): Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
G108-94(2015): Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
G109-07(2013): Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
G110-92(2015): Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
G111-97(2013): Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
G112-92(2015): Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
G116-99(2015): Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
G123-00(2015): Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
G124-10: Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
G129-00(2013): Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
G135-95(2013): Standard Guide for Computerized Exchange of Corrosion Data for Metals
G139-05(2015): Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
G140-02(2014): Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
G142-98(2016): Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
G146-01(2013): Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
G148-97(2011): Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
G150-13: Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
G157-98(2013): Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
G158-98(2016): Standard Guide for Three Methods of Assessing Buried Steel Tanks
G16-13: Standard Guide for Applying Statistics to Analysis of Corrosion Data
G161-00(2013): Standard Guide for Corrosion-Related Failure Analysis
G162-99(2010): Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
G165-99(2012): Standard Practice for Determining Rail-to-Earth Resistance
G168-00(2013): Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
G170-06(2012): Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
G180-13: Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
G184-06(2016): Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
G185-06(2016): Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
G186-05(2016): Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
G187-12a: Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
G188-05(2011): Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
G189-07(2013): Standard Guide for Laboratory Simulation of Corrosion Under Insulation
G192-08(2014): Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
G198-11(2016): Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
G199-09(2014): Standard Guide for Electrochemical Noise Measurement
G2/G2M-06(2011)e1: Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)
G200-09(2014): Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
G202-12(2016): Standard Test Method for Using Atmospheric Pressure Rotating Cage
G205-16: Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
G208-12(2016): Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
G209-14: Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
G28-02(2015): Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
G3-14: Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
G30-97(2016): Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
G33-99(2015): Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
G34-01(2013): Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
G35-98(2015): Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
G36-94(2013): Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
G37-98(2016): Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
G38-01(2013): Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
G39-99(2016): Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
G4-01(2014): Standard Guide for Conducting Corrosion Tests in Field Applications
G41-90(2013): Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
G44-99(2013): Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution
G46-94(2013): Standard Guide for Examination and Evaluation of Pitting Corrosion
G47-98(2011): Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
G48-11(2015): Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
G49-85(2011): Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
G5-14: Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
G50-10(2015): Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
G51-95(2012): Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
G52-00(2016)e1: Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
G57-06(2012): Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
G58-85(2015): Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
G59-97(2014): Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
G60-01(2013): Standard Practice for Conducting Cyclic Humidity Exposures
G61-86(2014): Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
G64-99(2013): Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
G66-99(2013): Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
G67-13: Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
G69-12: Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
G71-81(2014): Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
G78-15: Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
G82-98(2014): Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
G84-89(2012): Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
G85-11: Standard Practice for Modified Salt Spray (Fog) Testing
G87-02(2013): Standard Practice for Conducting Moist SO
G91-11: Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
G92-86(2015): Standard Practice for Characterization of Atmospheric Test Sites
G94-05(2014): Standard Guide for Evaluating Metals for Oxygen Service
G96-90(2013): Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
G97-97(2013): Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
Copyright © 1996 - 2014 ASTM. All Rights Reserved. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA
