All Information Technology & Telecommunication Standards

Search within Information Technology & Telecommunication


A111-99a(2014): Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire

A838-02(2013): Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications

AIIMASTM-BP-01-08: Portable Document Format-Healthcare (PDF) A Best Practices Guide

B286-07(2017): Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

B372-17: Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube

B452-09(2015): Standard Specification for Copper-Clad Steel Wire for Electronic Application

B501-10(2015): Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application

B520-12(2017): Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application

B624-07(2017): Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application

B869-07(2013): Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

B943-16: Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications

B965-09(2014): Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability

B971-10(2014): Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application

B972-10(2014): Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application

B973-10(2014): Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application

B986-13e1: Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application

C680-14: Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

D4565-15: Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

D4566-14: Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

D4730-13: Standard Specification for Flooding Compounds for Telecommunications Wire and Cable

D4731-13: Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable

D4732-13: Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable

D4967-99(2013): Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables

D5124-96(2013): Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation

D5127-13: Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries

D5740-16: Standard Guide for Writing Material Standards in the Classification Format

D5792-10(2015): Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives

D5899-98(2013): Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems

D6026-13: Standard Practice for Using Significant Digits in Geotechnical Data

D6232-16: Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities

D6311-98(2014): Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design

D6673-10: Standard Practice for Sewn Products Pattern Data Interchange-Data Format

D6963-13: Standard Terminology Relating to Sewn Products Automation

D7331-11: Standard Practice for Sewn Products Marker Data Interchange

D7366-08(2013): Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods

D7434-08(2014): Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads

D7435-08(2014): Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers

D7510-10(2016)e1: Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water

D7580/D7580M-09(2014): Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads

D7729-12: Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software

D7782-13: Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data

D7783-13: Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data

E1018-09(2013)e1: Standard Guide for Application of ASTM Evaluated Cross Section Data File

E1106-12(2017): Standard Test Method for Primary Calibration of Acoustic Emission Sensors

E1161-09(2014): Standard Practice for Radiologic Examination of Semiconductors and Electronic Components

E1165-12: Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

E1211/E1211M-17: Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

E1338-09(2015): Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases

E1432-04(2011): Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size

E1441-11: Standard Guide for Computed Tomography (CT) Imaging

E1453-14: Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

E1475-13: Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

E1561-93(2014): Standard Practice for Analysis of Strain Gage Rosette Data

E1578-13: Standard Guide for Laboratory Informatics

E1614-94(2013): Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems

E1635-06(2011): Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)

E1653-94(2013): Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides

E1654-94(2013): Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy

E1672-12: Standard Guide for Computed Tomography (CT) System Selection

E1695-95(2013): Standard Test Method for Measurement of Computed Tomography (CT) System Performance

E1714-07(2013): Standard Guide for Properties of a Universal Healthcare Identifier (UHID)

E1735-07(2014): Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV

E1774-17: Standard Guide for Electromagnetic Acoustic Transducers (EMATs)

E1781/E1781M-13: Standard Practice for Secondary Calibration of Acoustic Emission Sensors

E1816-12: Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

E1856-13: Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines

E1931-16: Standard Guide for Non-computed X-Ray Compton Scatter Tomography

E1935-97(2013): Standard Test Method for Calibrating and Measuring CT Density

E1942-98(2010)e1: Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing

E1947-98(2014): Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data

E1948-98(2014): Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data

E1962-14: Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

E2002-15: Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy

E2075/E2075M-15: Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod

E2077-00(2016): Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data

E2078-00(2016): Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data

E2117-06(2011): Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription

E2152-12: Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data

E2153-01(2011): Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color

E2210-12: Standard Specification for Guideline Elements Model version 3 (GEM III)—Document Model for Clinical Practice Guidelines

E2339-15: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E2369-12: Standard Specification for Continuity of Care Record (CCR)

E2443-05(2010)e1: Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets

E2456-06(2012): Standard Terminology Relating to Nanotechnology

E2457-07(2013): Standard Terminology for Healthcare Informatics

E2473-05(2011): Standard Practice for the Occupational/Environmental Health View of the Electronic Health Record

E2490-09(2015): Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)

E2491-13: Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

E2538-06(2011): Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic Health Record (EHR) Environment and Networked Architectures

E2544-11a: Standard Terminology for Three-Dimensional (3D) Imaging Systems

E2553-07(2013): Standard Guide for Implementation of a Voluntary Universal Healthcare Identification System

E2578-07(2012): Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions

E2641-09(2017): Standard Practice for Best Practices for Safe Application of 3D Imaging Technology

E2663-14: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

E2665-08(2017): Standard Specification for Archiving ITS-Generated Traffic Monitoring Data

E2699-13: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

E2700-14: Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

E2738-13e1: Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

E2767-13: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

E2807-11: Standard Specification for 3D Imaging Data Exchange, Version 1.0

E2825-12: Standard Guide for Forensic Digital Image Processing

E2834-12: Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)

E2859-11(2017): Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy

E2864-13: Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption

E2865-12: Standard Guide for Measurement of Electrophoretic Mobility and Zeta Potential of Nanosized Biological Materials

E2904-12: Standard Practice for Characterization and Verification of Phased Array Probes

E2909-13: Standard Guide for Investigation/Study/Assay Tab-Delimited Format for Nanotechnologies (ISA-TAB-Nano): Standard File Format for the Submission and Exchange of Data on Nanomaterials and Characterizations

E2916-13: Standard Terminology for Digital and Multimedia Evidence Examination

E2919-14: Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose

E2934-14: Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods

E317-16: Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

E431-96(2016): Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

E545-14: Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination

E650/E650M-17: Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

E746-07(2014): Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

E747-04(2010): Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

E801-16: Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices

E958-13: Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers

E976-15: Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

F1094-87(2012): Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method

F1125-87(2011): Standard Terminology of Image Quality in Impact Printing Systems

F1174-12: Standard Practice for Using a Personal Computer Printer as a Test Instrument

F1175-88(2011): Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison

F1190-11: Standard Guide for Neutron Irradiation of Unbiased Electronic Components

F1192-11: Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices

F1206-94(2011)e1: Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers

F1220-95(2014): Standard Guide for Emergency Medical Services System (EMSS) Telecommunications

F1221-89(2014): Standard Guide for Interagency Information Exchange

F1238-95(2011): Standard Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications

F1258-95(2014): Standard Practice for Emergency Medical Dispatch

F1262M-14: Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)

F1263-11: Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts

F1269-13: Standard Test Methods for Destructive Shear Testing of Ball Bonds

F1319-94(2011): Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)

F1351-96(2013): Standard Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems

F1367-98(2011): Standard Specification for Chromium Sputtering Targets for Thin Film Applications

F1372-93(2012): Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components

F1373-93(2012): Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components

F1374-92(2012): Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components

F1375-92(2012): Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components

F1376-92(2012): Standard Guide for Metallurgical Analysis for Gas Distribution System Components

F1394-92(2012): Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves

F1396-93(2012): Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components

F1397-93(2012): Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components

F1398-93(2012): Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components

F1405-08(2013): Standard Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products—Atlantek Method

F1424-92(2011): Standard Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono- or Dual-Component Toners

F1425-06(2011): Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials

F1434-97(2013): Standard Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer

F1438-93(2012): Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components

F1448-16: Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents

F1457-94b(2011): Standard Terminology Relating to Laser Printers

F1467-11: Standard Guide for Use of an X-Ray Tester (≈10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits

F1468-04a(2010): Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening

F1478-17: Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)

F1486-96(2013): Standard Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method)

F1512-94(2011): Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies

F1513-99(2011): Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications

F1560-00(2014): Standard Practice for Emergency Medical Dispatch Management

F1578-07(2014): Standard Test Method for Contact Closure Cycling of a Membrane Switch

F1583-95(2012): Standard Practice for Communications Procedures—Phonetics

F1593-08(2016): Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

F1594-95(2011): Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications

F1595-00(2012): Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches

F1596-15: Standard Test Method for Exposure of a Membrane Switch or Printed Electronic Device to Temperature and Relative Humidity

F1598-95(2014): Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)

F16-12(2017): Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps

F1623-96(2013): Standard Terminology Relating to Thermal Imaging Products

F1661-09(2015): Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch

F1662-16: Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device

F1663-15: Standard Test Method for Determining the Capacitance of a Membrane Switch or Printed Electronic Device

F1680-07a(2014): Standard Test Method for Determining Circuit Resistance of a Membrane Switch

F1681-14: Standard Test Method for Determining Current Carrying Capacity of a Membrane Switch Circuit

F1683-09: Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component

F1689-05(2012): Standard Test Method for Determining the Insulation Resistance of a Membrane Switch

F1699-96(2016): Standard Classification for Passive Fiber Optic Seals

F1709-97(2016): Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications

F1710-08(2016): Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer

F1711-96(2016): Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method

F1716-96(2015): Standard Guide for Transition and Performance of Marine Software Systems Maintenance

F1757-96(2015): Standard Guide for Digital Communication Protocols for Computerized Systems

F1761-00(2011): Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets

F1762-14: Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch

F1764-97(2012): Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue

F18-12(2017): Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices

F180-94(2015): Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices

F1812-15: Standard Test Method for Determining the Effect of an ESD Discharge on a Membrane Switch or Printed Electronic Device

F1842-15: Standard Test Method for Determining Ink or Coating Adhesion on Flexible Substrates for a Membrane Switch or Printed Electronic Device

F1843-15: Standard Practice for Sample Preparation of Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements

F1844-97(2016): Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage

F1845-08(2016): Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer

F1857-01(2011): Standard Terminology Relating to Ink Jet Printers and Images Made Therefrom

F1892-12: Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices

F1893-11: Guide for Measurement of Ionizing Dose-Rate Survivability and Burnout of Semiconductor Devices

F1894-98(2011): Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness

F1895-14: Standard Test Method for Submersion of a Membrane Switch

F1896-16: Test Method for Determining the Electrical Resistivity of a Printed Conductive Material

F1945-05(2011): Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

F1995-13: Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch

F1996-14: Standard Test Method for Silver Migration for Membrane Switch Circuitry

F2001-15: Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record

F2017-15: Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration

F2035-00(2011): Standard Practice for Measuring the Dark Stability of Ink Jet Prints

F2036-05(2011): Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers

F2037-00(2011): Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments

F204-76(2013): Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire

F205-94(2015): Standard Test Method for Measuring Diameter of Fine Wire by Weighing

F2067-13: Standard Practice for Development and Use of Oil-Spill Trajectory Models

F2072-14: Standard Test Method for Hosedown of a Membrane Switch

F2073-14: Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch

F2076-01(2014): Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities

F2112-02(2011): Standard Terminology for Membrane Switches

F2113-01(2011): Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications

F2182-11a: Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging

F2187-02(2011): Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly

F2188-02(2011): Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly

F219-96(2013): Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps

F2218-02(2015): Standard Guide for Hardware Implementation for Computerized Systems

F2233-03(2015): Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers

F2296-04(2012): Standard Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods—Score/Tape, Cross Hatch, X-Cut, and Crease-Folding

F2303-03(2015): Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits

F2327-15: Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water

F2357-10: Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader

F2359-04(2011): Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source

F2360-08(2015)e1: Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source

F2366-12: Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus

F2405-04(2011): Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer

F2406-04(2012): Standard Practice for Determining Yield of Solid Ink Sticks

F2446-04(2010): Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange

F2452-04(2012): Standard Practice for Determining the Adhesion of Print Media Utilizing Mechanical Stress: Two Different Test Methods—Score/Tape and Cross Hatch

F2462-05(2015): Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems

F2494-05(2011): Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment

F2495-05(2011): Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment

F2496-05(2011)e1: Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings

F2497-05(2011)e1: Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester

F2498-05(2011): Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method

F2554-10: Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems

F2555-06(2011): Standard Practice for Determining Page Yield of Ink Jet Printer Cartridges—Continuous Printing Method

F256-05(2015): Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium

F2592-16: Standard Test Method for Measuring the Force-Displacement of a Membrane Switch

F2632-07(2013)e1: Standard Practice for Determining the Toner Usage for Color Printer Cartridges

F269-60(2014): Standard Test Method for Sag of Tungsten Wire

F2749-15: Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Printed Electronic Device

F2750-16: Standard Test Method for Determining the Effects of Bending a Membrane Switch or Printed Electronic Device

F2771-10(2016): Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions

F2815-10(2014): Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program

F2865-13: Standard Guide for Classifying the Degrees of Ingress of Dust and Water into a Membrane Switch

F2866-11: Standard Test Method for Flammability of a Membrane Switch in Defined Assembly

F288-96(2014): Standard Specification for Tungsten Wire for Electron Devices and Lamps

F289-96(2014): Standard Specification for Molybdenum Wire and Rod for Electronic Applications

F29-97(2017): Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications

F290-94(2015): Standard Specification for Round Wire for Winding Electron Tube Grid Laterals

F2926-12: Standard Guide for Selection and Operation of Vessel-mounted Camera Systems

F2964-12: Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device

F31-16: Standard Specification for Nickel-Chromium-Iron Sealing Alloys

F360-82(2011): Standard Practice for Image Evaluation of Electrostatic Business Copies

F364-96(2014): Standard Specification for Molybdenum Flattened Wire for Electron Tubes 

F375-89(2015): Standard Specification for Integrated Circuit Lead Frame Material

F390-11: Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array

F448-11: Test Method for Measuring Steady-State Primary Photocurrent

F458-13: Standard Practice for Nondestructive Pull Testing of Wire Bonds1,2

F459-13: Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds

F487-13: Standard Specification for Fine Aluminum–1 % Silicon Wire for Semiconductor Lead-Bonding

F505-87(2011): Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners

F549-85(2011): Standard Terminology Relating to Carbonless Copy Products

F615M-95(2013): Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)

F685-96(2011): Standard Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems

F686-94(2011): Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter

F7-95(2016): Standard Specification for Aluminum Oxide Powder

F706-96(2011): Standard Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners

F73-96(2017): Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps

F744M-16: Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits (Metric)

F76-08(2016)e1: Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors

F773M-16: Standard Practice for Measuring Dose Rate Response of Linear Integrated Circuits (Metric)

F792-17e1: Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems

F83-71(2013): Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters

F85-76(2013): Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes

F909-94a(2011): Standard Terminology Relating to Printers

F96-77(2015): Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms

F974-06(2011)e1: Standard Practice for Determination of Color Response of Electrostatic Copying System, Black and White Output

F980-16: Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices

F996-11: Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current-Voltage Characteristics

G107-95(2015): Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input

G135-95(2013): Standard Guide for Computerized Exchange of Corrosion Data for Metals