All Health Care & Medical Devices Standards

Search within Health Care & Medical Devices


AIIMASTM-BP-01-08: Portable Document Format-Healthcare (PDF) A Best Practices Guide

B819-00(2011): Standard Specification for Seamless Copper Tube for Medical Gas Systems

C1473-11: Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry

D3577-09(2015): Standard Specification for Rubber Surgical Gloves

D3578-05(2015): Standard Specification for Rubber Examination Gloves

D3579-77(2016): Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type

D3738-16: Standard Specification for Rubber-Coated Cloth Hospital Sheeting

D4267-07(2015): Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers

D4774-11e1: Standard Specification for User Applied Drug Labels in Anesthesiology

D4775/D4775M-09(2014): Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)

D5151-06(2015): Standard Test Method for Detection of Holes in Medical Gloves

D5250-06(2015): Standard Specification for Poly(vinyl chloride) Gloves for Medical Application

D6124-06(2017): Standard Test Method for Residual Powder on Medical Gloves

D6319-10(2015): Standard Specification for Nitrile Examination Gloves for Medical Application

D6355-07(2017): Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves

D6398-08(2014): Standard Practice to Enhance Identification of Drug Names on Labels

D6977-04(2016): Standard Specification for Polychloroprene Examination Gloves for Medical Application

D6978-05(2013): Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs

D7102-17: Standard Guide for Determination of Endotoxin on Sterile Medical Gloves

D7103-06(2013): Standard Guide for Assessment of Medical Gloves

D7160-16: Standard Practice for Determination of Expiration Dating for Medical Gloves

D7161-16: Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions

D7198-05(2012): Standard Specification for Disposable Embalming Gloves for Single-Use Applications

D7225-13: Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors

D7427-16: Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex

D7709-12(2017): Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters

E1044-96(2011): Standard Specification for Glass Serological Pipets (General Purpose and Kahn)

E1047-85(2015): Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable

E1048-88(2015): Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants

E1052-11: Standard Test Method to Assess the Activity of Microbicides against Viruses in Suspension

E1053-11: Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces

E1054-08(2013): Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents

E1061-01(2014): Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers

E1092-91(2016): Standard Specification for Glass Micro Folin Pipet, Disposable

E1093-91(2012): Standard Specification for Glass Prothrombin Pipet, Disposable

E1094-04(2015): Standard Specification for Pharmaceutical Glass Graduates

E1104-98(2016): Standard Specification for Clinical Thermometer Probe Covers and Sheaths

E1112-00(2011): Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature

E1115-11: Standard Test Method for Evaluation of Surgical Hand Scrub Formulations

E1153-14: Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces

E1173-15: Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations

E1174-13: Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations

E1262-88(2013): Standard Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay

E1299-96(2016): Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature

E1326-15a: Standard Guide for Evaluating Non-culture Microbiological Tests

E1327-07(2012)e1: Standard Test Method for Evaluation of Antimicrobial Handwash Formulations by Utilizing Fingernail Regions

E1428-15a: Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)

E1482-12: Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization

E1564-00(2014): Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials

E1565-00(2014): Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures

E1566-00(2014): Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen

E1589-05(2015): Standard Test Method for Evaluation of First Aid Antiseptic Drug Products

E1714-07(2013): Standard Guide for Properties of a Universal Healthcare Identifier (UHID)

E1766-15: Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices

E1837-96(2014): Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test)

E1838-17: Standard Test Method for Determining the Virus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults

E1874-14: Standard Test Method for Recovery of Microorganisms From Skin using the Cup Scrub Technique

E1880-12: Standard Practice for Tissue Cryosection Analysis with SIMS

E1881-12: Standard Guide for Cell Culture Analysis with SIMS

E1882-10: Standard Test Method for Evaluation of Antimicrobial Formulations by the Agar Patch Technique

E1883-02(2015): Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique

E1891-10a(2015): Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient

E1936-15: Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems

E1959-05(2011): Standard Guide for Requests for Proposals Regarding Medical Transcription Services for Healthcare Institutions

E1965-98(2016): Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature

E2011-13: Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand

E2097-00(2014): Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products

E2111-12: Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals

E2117-06(2011): Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription

E2149-13a: Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions

E2180-07(2017): Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials

E2196-17: Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with Medium Shear and Continuous Flow Using Rotating Disk Reactor

E2197-11: Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides

E2210-12: Standard Specification for Guideline Elements Model version 3 (GEM III)—Document Model for Clinical Practice Guidelines

E2274-16: Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants

E2276-10: Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults

E2280-13: Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities

E2314-03(2014): Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)

E2315-16: Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure

E2344-04(2011): Standard Guide for Data Capture through the Dictation Process

E2361-13: Standard Guide for Testing Leave-On Products Using In-Situ Methods

E2362-15: Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection

E2363-14: Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry

E2364-04(2010): Standard Guide to Speech Recognition Technology Products in Health Care

E2369-12: Standard Specification for Continuity of Care Record (CCR)

E2406-16: Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations

E2457-07(2013): Standard Terminology for Healthcare Informatics

E2466-13: Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology

E2473-05(2011): Standard Practice for the Occupational/Environmental Health View of the Electronic Health Record

E2474-14: Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology

E2475-10(2016): Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control

E2476-16: Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture

E2500-13: Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment

E2502-06(2011): Standard Guide for Medical Transcription Workstations

E2503-13e1: Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus

E2522-07(2013): Standard Guide for Quality Indicators for Health Classifications

E2524-08(2013): Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles

E2525-08(2013): Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies

E2526-08(2013): Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human Hepatocarcinoma Cells

E2535-07(2013): Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings

E2537-16: Standard Guide for Application of Continuous Process Verification to Pharmaceutical and Biopharmaceutical Manufacturing

E2538-06(2011): Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic Health Record (EHR) Environment and Networked Architectures

E2553-07(2013): Standard Guide for Implementation of a Voluntary Universal Healthcare Identification System

E2562-17: Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with High Shear and Continuous Flow using CDC Biofilm Reactor

E2613-14: Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using Fingerpads of Adults

E2614-15: Standard Guide for Evaluation of Cleanroom Disinfectants

E2629-11: Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems

E2647-13: Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown Using Drip Flow Biofilm Reactor with Low Shear and Continuous Flow

E2656-16: Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute

E2670-15: Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras

E2682-09(2014): Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses

E2693-14: Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment

E2698-10: Standard Practice for Radiological Examination Using Digital Detector Arrays

E2720-16: Standard Practice for Evaluation of Effectiveness of Decontamination Procedures for Air-Permeable Materials when Challenged with Biological Aerosols Containing Human Pathogenic Viruses

E2721-16: Standard Practice for Evaluation of Effectiveness of Decontamination Procedures for Surfaces When Challenged with Droplets Containing Human Pathogenic Viruses

E2722-14: Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media

E2736-10: Standard Guide for Digital Detector Array Radiology

E2737-10: Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

E2752-10(2015): Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products

E2755-15: Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Healthcare Personnel Hand Rub Formulations Using Hands of Adults

E2756-10: Standard Terminology Relating to Antimicrobial and Antiviral Agents

E2783-11(2016): Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure

E2784-10(2015): Standard Test Method for Evaluation of the Effectiveness of Handwash Formulations Using the Paper Towel (Palmar) Method of Hand Contamination

E2799-17: Standard Test Method for Testing Disinfectant Efficacy against Pseudomonas aeruginosa Biofilm using the MBEC Assay

E2810-11(2017): Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units

E2839-11: Standard Test Method for Production of Clostridium difficile Spores for Use in Efficacy Evaluation of Antimicrobial Agents

E2871-13: Standard Test Method for Evaluating Disinfectant Efficacy Against Pseudomonas aeruginosa Biofilm Grown in CDC Biofilm Reactor Using Single Tube Method

E2888-12: Standard Practice for Process for Inactivation of Rodent Retrovirus by pH

E2891-13: Standard Guide for Multivariate Data Analysis in Pharmaceutical Development and Manufacturing Applications

E2894-13: Standard Test Method for Applying Aerosolized Bacillus Spores as Dry Inocula to Inanimate Surfaces

E2895-13: Standard Test Method for Producing High Titers of Viable and Semi-Purified Spores of Clostridium difficile using a Liquid Medium

E2896-12: Standard Test Method for Quantitative Petri Plate Method (QPM) for Determining the Effectiveness of Antimicrobial Towelettes

E2897-12(2017): Standard Guide for Evaluation of the Effectiveness of Hand Hygiene Topical Antimicrobial Products using ex vivo Porcine Skin

E2898-14: Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications

E2903-13: Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes

E2946-13: Standard Test Method for Determining the Bacteria-Reducing Effectiveness of Food-Handler Handwash Formulations Using Hands of Adults

E667-98(2009): Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers

E714-94(2015): Standard Specification for Disposable Glass Serological Pipets

E732-80(2011): Standard Specification for Disposable Pasteur-Type Pipet

E734-80(2015): Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)

E787-81(2017): Standard Specification for Disposable Glass Micro Blood Collection Pipets

E788-97(2013): Standard Specification for Pipet, Blood Diluting

E825-98(2016): Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature

E890-94(2015): Standard Specification for Disposable Glass Culture Tubes

E934-94(2015): Standard Specification for Serological Pipet, Disposable Plastic

E961-97(2013): Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable

F1026-86(2014): Standard Specification for General Workmanship and Performance Measurements of Hemostatic Forceps

F1027-86(2012): Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices

F1031-13: Standard Practice for Training the Emergency Medical Technician (Basic)

F1044-05(2011)e1: Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

F1058-16: Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)

F1078-10(2011): Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades

F1079-87(2014): Standard Specification for Inserted and Noninserted Surgical Scissors

F1086-94(2016): Standard Guide for Structures and Responsibilities of Emergency Medical Services Systems Organizations

F1088-04a(2010): Standard Specification for Beta-Tricalcium Phosphate for Surgical Implantation

F1089-10: Standard Test Method for Corrosion of Surgical Instruments

F1091-12: Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)

F1108-14: Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)

F1147-05(2017)e1: Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings

F1149-93(2013): Standard Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services

F116-12(2016): Standard Specification for Medical Screwdriver Bits

F1160-14: Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings

F1177-02(2009): Standard Terminology Relating to Emergency Medical Services

F1185-03(2014): Standard Specification for Composition of Hydroxylapatite for Surgical Implants

F1218-89(2014): Standard Specification for Bronchoscopes (Rigid)

F1220-95(2014): Standard Guide for Emergency Medical Services System (EMSS) Telecommunications

F1221-89(2014): Standard Guide for Interagency Information Exchange

F1223-14: Standard Test Method for Determination of Total Knee Replacement Constraint

F1229-01(2016): Standard Guide for Qualification and Training of EMS Air Medical Patient Care Providers

F1256-13: Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Emergency Medical Technician (EMT) Training Programs

F1257-13: Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Emergency Medical Technician

F1258-95(2014): Standard Practice for Emergency Medical Dispatch

F1264-16e1: Standard Specification and Test Methods for Intramedullary Fixation Devices

F1268-90(2012): Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems

F1285-13: Standard Guide for Training the Emergency Medical Technician to Perform Patient Examination Techniques

F1287-90(2012): Standard Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care

F1288-90(2009): Standard Guide for Planning for and Response to a Multiple Casualty Incident

F1295-16: Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)

F1314-13ae1: Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

F1325-91(2016): Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods

F1339-92(2016): Standard Guide for Organization and Operation of Emergency Medical Services Systems

F1350-15: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)

F1357-14: Standard Specification for Articulating Total Wrist Implants

F136-13: Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)

F1377-13: Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)

F1378-12: Standard Specification for Shoulder Prostheses

F138-13a: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

F139-12: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

F1408-97(2013): Standard Practice for Subcutaneous Screening Test for Implant Materials

F1439-03(2013): Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials

F1441-03(2014): Standard Specification for Soft-Tissue Expander Devices

F1453-92(2012): Standard Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care

F1472-14: Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)

F1517-14: Standard Guide for Scope of Performance of Emergency Medical Services Ambulance Operators

F1536-95(2015)e1: Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape

F1537-11: Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)

F1538-03(2017): Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation

F1541-17: Standard Specification and Test Methods for External Skeletal Fixation Devices

F1552-94(2016): Standard Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers

F1555-94(2015): Standard Guide for Characteristics for Extremity Splints

F1556-94(2015): Standard Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics

F1558-94(2015): Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)

F1559-94(2015): Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)

F1560-00(2014): Standard Practice for Emergency Medical Dispatch Management

F1580-12: Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants

F1581-08(2016): Standard Specification for Composition of Anorganic Bone for Surgical Implants

F1582-98(2016): Standard Terminology Relating to Spinal Implants

F1586-13e1: Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

F1609-08(2014): Standard Specification for Calcium Phosphate Coatings for Implantable Materials

F1611-00(2013): Standard Specification for Intramedullary Reamers

F1613-95(2016): Standard Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)

F1616-95(2016): Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings

F1635-16: Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

F1638-95(2016)e1: Standard Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)

F1651-95(2009): Standard Guide for Training the Emergency Medical Technician (Paramedic)

F1653-95(2012): Standard Guide for Scope of Performance of Triage in a Prehospital Environment

F1654-95(2012): Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment

F1655-95(2013): Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings

F1671/F1671M-13: Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System

F1672-14: Standard Specification for Resurfacing Patellar Prosthesis

F1705-96(2012): Standard Guide for Training Emergency Medical Services Ambulance Operations

F1713-08(2013): Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)

F1714-96(2013): Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices

F1717-15: Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

F1744-96(2016): Standard Guide for Care and Handling of Stainless Steel Surgical Instruments

F1781-15: Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants

F1798-13: Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants

F1800-12: Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements

F1801-97(2014): Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials

F1813-13: Standard Specification for Wrought Titanium–12 Molybdenum–6 Zirconium–2 Iron Alloy for Surgical Implant (UNS R58120)

F1814-15: Standard Guide for Evaluating Modular Hip and Knee Joint Components

F1819-07(2013): Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique

F1820-13: Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices

F1828-17: Standard Specification for Ureteral Stents

F1829-16: Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear

F1830-97(2017): Standard Practice for Selection of Blood for in vitro Evaluation of Blood Pumps

F1831-17: Standard Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices

F1839-08(2016): Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments

F1840-10(2016): Standard Terminology for Surgical Suture Needles

F1841-97(2017): Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps

F1854-15: Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants

F1855-00(2011): Standard Specification for Polyoxymethylene (Acetal) for Medical Applications

F1862/F1862M-17: Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)

F1874-98(2011): Standard Test Method for Bend Testing of Needles Used in Surgical Sutures

F1875-98(2014): Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface

F1877-16: Standard Practice for Characterization of Particles

F1903-10: Standard Practice for Testing For Biological Responses to Particles In Vitro

F1904-14: Standard Practice for Testing the Biological Responses to Particles in vivo

F1925-09: Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants

F1926/F1926M-14: Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings

F1929-15: Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

F1949-99(2013): Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles

F1978-17: Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

F1980-16: Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices

F1983-14: Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications

F1984-99(2013): Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials

F2003-02(2015): Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air

F2004-17: Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis

F2005-05(2015): Standard Terminology for Nickel-Titanium Shape Memory Alloys

F2009-00(2011): Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses

F2020-02a(2009): Standard Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances

F2024-10(2016): Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings

F2025-06(2012): Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment

F2026-16: Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

F2027-16: Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products

F2028-14: Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation

F2033-12: Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials

F2038-00(2011): Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials

F2042-00(2011): Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication

F2051-00(2014): Standard Specification for Implantable Saline Filled Breast Prosthesis

F2052-15: Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment

F2062-00(2011): Standard Specification for Square Drive Interconnections on Surgical Instruments

F2063-12: Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants

F2064-17: Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications

F2066-13e1: Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)

F2068-15: Standard Specification for Femoral Prostheses—Metallic Implants

F2076-01(2014): Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities

F2077-17: Test Methods For Intervertebral Body Fusion Devices

F2079-09(2017): Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents

F2081-06(2017): Standard Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents

F2083-12: Standard Specification for Knee Replacement Prosthesis

F2091-15: Standard Specification for Acetabular Prostheses

F2097-16: Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products

F2100-11: Standard Specification for Performance of Materials Used in Medical Face Masks

F2101-14: Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus

F2102-17: Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants

F2103-11: Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications

F2118-14: Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials

F2119-07(2013): Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants

F2129-17: Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

F2131-02(2012): Standard Test Method for In Vitro Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line

F2146-13: Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)

F2147-01(2016): Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens

F2148-13: Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)

F2149-16: Standard Test Method for Automated Analyses of Cells—the Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions

F2150-13: Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products

F2171-02(2009): Standard Guide for Defining the Performance of First Aid Providers in Occupational Settings

F2172-02(2011): Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers

F2180-17: Standard Specification for Metallic Implantable Strands and Cables

F2181-14: Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants

F2182-11a: Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging

F2193-14: Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System

F2211-13: Standard Classification for Tissue Engineered Medical Products (TEMPs)

F2212-11: Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)

F2213-17: Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment

F2214-16: Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)

F2224-09(2014): Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants

F2229-12: Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)

F2255-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading

F2256-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading

F2257-14: Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)

F2258-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in Tension

F2259-10(2012)e1: Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy

F2260-03(2012)e1: Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy

F2266-03(2015): Standard Specification for Masses Used in Testing Rescue Systems and Components

F2267-04(2011): Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

F2299/F2299M-03(2017): Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres

F2312-11: Standard Terminology Relating to Tissue Engineered Medical Products

F2313-10: Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide

F2315-11: Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels

F2345-03(2013): Standard Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads

F2346-05(2011): Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs

F2347-15: Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications

F2381-10: Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

F2382-17: Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT)

F2383-11: Standard Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs)

F2384-10(2016): Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)

F2385-15: Standard Practice for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs

F2392-04(2015): Standard Test Method for Burst Strength of Surgical Sealants

F2393-12(2016): Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications

F2394-07(2017): Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System

F2401-16: Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices

F2407-06(2013)e1: Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities

F2423-11(2016): Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses

F2428-04(2011): Standard Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)

F2450-10: Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products

F2451-05(2010): Standard Guide for in vivo Assessment of Implantable Devices Intended to Repair or Regenerate Articular Cartilage

F2458-05(2015): Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants

F2459-12: Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis

F2475-11: Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials

F2477-07(2013): Standard Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents

F2502-17: Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants

F2503-13: Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment

F2504-05(2014): Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices

F2514-08(2014): Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading

F2516-14: Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials

F2527-16: Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)

F2528-06(2014): Standard Test Methods for Enteral Feeding Devices with a Retention Balloon

F2529-13: Standard Guide for in vivo Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM)

F2537-06(2011): Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion

F2554-10: Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems

F2559/F2559M-06(2015): Standard Guide for Writing a Specification for Sterilizable Peel Pouches

F2565-13: Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications

F2579-10: Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants

F2580-13: Standard Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis

F2581-12(2017): Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

F2582-14: Standard Test Method for Impingement of Acetabular Prostheses

F2602-13: Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)

F2603-06(2012): Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds

F2605-16: Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)

F2606-08(2014): Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems

F2624-12(2016): Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs

F2625-10(2016): Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

F2633-13: Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants

F2664-11: Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods

F2665-09(2014): Standard Specification for Total Ankle Replacement Prosthesis

F2694-16: Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses

F2695-12: Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications

F2706-17: Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model

F2721-09(2014): Standard Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects

F2722-15: Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops

F2723-13a: Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation

F2724-08(2014): Standard Test Method for Evaluating Mobile Bearing Knee Dislocation

F2726-08: Standard specification for fixation devices for tracheal tubes and other airway devices

F2739-16: Standard Guide for Quantifying Cell Viability within Biomaterial Scaffolds

F2743-11: Standard Guide for Coating Inspection and Acute Particulate Characterization of Coated Drug-Eluting Vascular Stent Systems

F2754/F2754M-09(2013): Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire

F2759-11: Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices

F2761-09(2013): Medical Devices and Medical Systems - Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) - Part 1: General requirements and conceptual model

F2777-16: Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion

F2778-09(2015): Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)

F2789-10(2015): Standard Guide for Mechanical and Functional Characterization of Nucleus Devices

F2790-10(2014): Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses

F2791-15: Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions

F2808-10: Standard Test Method for Performing Behind-the-Knee (BTK) Test for Evaluating Skin Irritation Response to Products and Materials That Come Into Repeated or Extended Contact with Skin

F2809-10: Standard Terminology Relating to Medical and Surgical Materials and Devices

F2819-10(2015)e2: Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices

F2820-12: Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications

F2847-17: Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments

F2848-17: Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns

F2883-11: Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications

F2884-12: Standard Guide for Pre-clinical in vivo Evaluation of Spinal Fusion

F2885-17: Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications

F2886-17: Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications

F2887-17: Standard Specification for Total Elbow Prostheses

F2888-13: Standard Test Method for Platelet Leukocyte Count—An In-Vitro Measure for Hemocompatibility Assessment of Cardiovascular Materials

F2895-15: Standard Practice for Digital Radiography of Cast Metallic Implants

F2900-11: Standard Guide for Characterization of Hydrogels used in Regenerative Medicine

F2901-13: Standard Guide for Selecting Tests to Evaluate Potential Neurotoxicity of Medical Devices

F2902-16e1: Standard Guide for Assessment of Absorbable Polymeric Implants

F2903-11: Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair

F2914-12: Standard Guide for Identification of Shelf-life Test Attributes for Endovascular Devices

F2942-13: Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents

F2943-14: Standard Guide for Presentation of End User Labeling Information for Musculoskeletal Implants

F2944-12: Standard Test Method for Automated Colony Forming Unit (CFU) Assays—Image Acquisition and Analysis Method for Enumerating and Characterizing Cells and Colonies in Culture

F2977-13: Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants

F2989-13: Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications

F2995-16: Standard Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids

F2996-13: Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems

F2997-13: Standard Practice for Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis

F3036-13: Standard Guide for Testing Absorbable Stents

F3046-13: Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)

F366-17: Standard Specification for Fixation Pins and Wires

F382-17: Standard Specification and Test Method for Metallic Bone Plates

F384-17: Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices

F451-16: Standard Specification for Acrylic Bone Cement

F452-76(2014): Standard Specification for Preformed Cranioplasty Plates

F543-17: Standard Specification and Test Methods for Metallic Medical Bone Screws

F560-13e1: Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)

F561-13: Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

F562-13: Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)

F564-17: Standard Specification and Test Methods for Metallic Bone Staples

F565-04(2013): Standard Practice for Care and Handling of Orthopedic Implants and Instruments

F601-13: Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants

F602-09(2015): Standard Criteria for Implantable Thermoset Epoxy Plastics

F603-12(2016): Standard Specification for High-Purity Dense Aluminum Oxide for Medical Application

F619-14: Standard Practice for Extraction of Medical Plastics

F620-11(2015): Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition

F621-12(2017): Standard Specification for Stainless Steel Forgings for Surgical Implants

F623-99(2013): Standard Performance Specification for Foley Catheter

F624-09(2015)e1: Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications

F629-15: Standard Practice for Radiography of Cast Metallic Surgical Implants

F639-09(2015): Standard Specification for Polyethylene Plastics for Medical Applications

F640-12: Standard Test Methods for Determining Radiopacity for Medical Use

F641-09(2014): Standard Specification for Implantable Epoxy Electronic Encapsulants

F647-94(2014): Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application

F648-14: Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

F665-09(2015): Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application

F67-13(2017): Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)

F688-14: Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)

F700-93(2014): Standard Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments

F702-10: Standard Specification for Polysulfone Resin for Medical Applications

F719-81(2012): Standard Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation

F720-17: Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test

F732-17: Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

F746-04(2014): Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

F748-16: Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices

F749-13: Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit

F75-12: Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)

F750-87(2012): Standard Practice for Evaluating Material Extracts by Systemic Injection in the Mouse

F754-08(2015): Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders

F755-99(2011): Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants

F756-17: Standard Practice for Assessment of Hemolytic Properties of Materials

F763-04(2016): Standard Practice for Short-Term Screening of Implant Materials

F799-11: Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)

F813-07(2012): Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices

F838-15a: Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration

F86-13: Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants

F881-94(2014): Standard Specification for Silicone Elastomer Facial Implants

F895-11(2016): Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity

F897-02(2013): Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws

F899-12b: Standard Specification for Wrought Stainless Steels for Surgical Instruments

F90-14: Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)

F921-10(2011): Standard Terminology Relating to Hemostatic Forceps

F961-14: Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

F981-04(2016): Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone

F983-86(2013): Standard Practice for Permanent Marking of Orthopaedic Implant Components

F997-10: Standard Specification for Polycarbonate Resin for Medical Applications

G175-13: Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications