B1000-15: Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
B812-18: Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
C1023-10(2018): Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
C1109-10(2015): Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1111-10(2015): Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1133/C1133M-10(2018): Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
C1207-10(2018): Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
C1285-14: Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
C1318-15a: Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1387-14: Standard Guide for the Determination of Technetium-99 in Soil
C1402-17: Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
C1463-19: Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
C1507-12: Standard Test Method for Radiochemical Determination of Strontium-90 in Soil
C1529-06a(2011): Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
C1682-17: Standard Guide for Characterization of Spent Nuclear Fuel in Support of Interim Storage, Transportation and Geologic Repository Disposal
C1745/C1745M-18: Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
C1746/C1746M-19: Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
C1751-11: Standard Guide for Sampling Radioactive Tank Waste
C1752-17: Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges
C1814/C1814M-16: Standard Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
C1846/C1846M-19: Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C1850-17: Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems
C1858-17a: Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions
C1864-17: Standard Test Method for Determination of Solar Reflectance of Directionally Reflective Material Using Portable Solar Reflectometer
C593-06(2011): Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C977-18: Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
C998-17: Standard Practice for Sampling Surface Soil for Radionuclides
C999-17: Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
D1066-18e1: Standard Practice for Sampling Steam
D1067-16: Standard Test Methods for Acidity or Alkalinity of Water
D1068-15: Standard Test Methods for Iron in Water
D1125-14: Standard Test Methods for Electrical Conductivity and Resistivity of Water
D1140-17: Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
D1141-98(2013): Standard Practice for the Preparation of Substitute Ocean Water
D1179-16: Standard Test Methods for Fluoride Ion in Water
D1193-06(2018): Standard Specification for Reagent Water
D1245-17: Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
D1246-16: Standard Test Method for Bromide Ion in Water
D1252-06(2012)e1: Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
D129-18: Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
D1292-15: Standard Test Method for Odor in Water
D1356-17: Standard Terminology Relating to Sampling and Analysis of Atmospheres
D1357-95(2019): Standard Practice for Planning the Sampling of the Ambient Atmosphere
D1385-07(2018)e1: Standard Test Method for Hydrazine in Water
D1426-15: Standard Test Methods for Ammonia Nitrogen In Water
D1429-13: Standard Test Methods for Specific Gravity of Water and Brine
D1498-14: Standard Test Method for Oxidation-Reduction Potential of Water
D1557-12e1: Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D1607-91(2018)e1: Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
D1687-17: Standard Test Methods for Chromium in Water
D1691-17: Standard Test Methods for Zinc in Water
D1739-98(2017): Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
D1782-17: Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
D1783-01(2012)e1: Standard Test Methods for Phenolic Compounds in Water
D1886-14: Standard Test Methods for Nickel in Water
D1914-95(2014): Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
D1929-16: Standard Test Method for Determining Ignition Temperature of Plastics
D1943-05(2012): Standard Test Method for Alpha Particle Radioactivity of Water
D1971-16: Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
D1976-18: Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
D1997-13: Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
D2010/D2010M-98(2017): Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
D2035-19: Standard Practice for Coagulation-Flocculation Jar Test of Water
D2036-09(2015): Standard Test Methods for Cyanides in Water
D2168-10(2018): Standard Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors
D2216-19: Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2331-08(2013): Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
D2332-13: Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
D2434-19: Standard Test Method for Permeability of Granular Soils (Constant Head)
D2460-07(2013): Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water
D2488-17e1: Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
D2580-06(2012): Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
D2687-95(2016): Standard Practices for Sampling Particulate Ion-Exchange Materials
D2777-13: Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
D2913-14: Standard Test Method for Mercaptan Content of the Atmosphere
D2937-17e2: Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
D2972-15: Standard Test Methods for Arsenic in Water
D2973-16: Standard Test Method for Total Nitrogen in Peat Materials
D2974-14: Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
D2978-15e1: Standard Test Methods for Volume of Processed Peat Materials
D2980-17e1: Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
D3154-14: Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
D3162-12: Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
D3195/D3195M-10(2015): Standard Practice for Rotameter Calibration
D3213-19: Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
D3223-17: Standard Test Method for Total Mercury in Water
D3249-95(2019): Standard Practice for General Ambient Air Analyzer Procedures
D3266-91(2018): Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
D3267-12: Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
D3268-91(2018): Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
D3270-13: Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
D3282-15: Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
D3325-90(2013): Standard Practice for Preservation of Waterborne Oil Samples
D3328-06(2013): Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
D3352-15: Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
D3373-17: Standard Test Method for Vanadium in Water
D3385-18: Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
D3404-15: Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
D3454-18: Standard Test Method for Radium-226 in Water
D3464-96(2014): Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
D3483-14: Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
D3609-00(2014): Standard Practice for Calibration Techniques Using Permeation Tubes
D3614-07(2013): Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
D3631-99(2017): Standard Test Methods for Measuring Surface Atmospheric Pressure
D3648-14: Standard Practices for the Measurement of Radioactivity
D3649-06(2014): Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water
D3670-91(2014): Standard Guide for Determination of Precision and Bias of Methods of Committee D22
D3685/D3685M-13: Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
D3686-13: Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
D3687-19: Standard Test Method for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
D3695-95(2013): Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
D3731-87(2012): Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
D3739-19: Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
D3801-19: Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
D3824-12: Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
D3858-95(2014): Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
D3859-15: Standard Test Methods for Selenium in Water
D3861-91(2011): Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters
D3862-13: Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
D3863-87(2011): Standard Test Method for Retention Characteristics of 0.40 to 0.45-μm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
D3864-12: Standard Guide for On-Line Monitoring Systems for Water Analysis
D3865-09(2015): Standard Test Method for Plutonium in Water
D3866-18: Standard Test Methods for Silver in Water
D3868-15: Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
D3869-15: Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
D3875-15: Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines
D3919-15: Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
D3920-18: Standard Test Method for Strontium in Water
D3923-08(2014): Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
D3967-16: Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
D3974-09(2015): Standard Practices for Extraction of Trace Elements from Sediments
D3975-93(2014): Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
D3976-92(2015): Standard Practice for Preparation of Sediment Samples for Chemical Analysis
D3977-97(2013)e1: Standard Test Methods for Determining Sediment Concentration in Water Samples
D3978-04(2012): Standard Practice for Algal Growth Potential Testing with Pseudokirchneriella subcapitata
D3987-12: Standard Practice for Shake Extraction of Solid Waste with Water
D4012-15: Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
D4025-18: Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
D4043-17: Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
D4044/D4044M-15: Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
D4050-14: Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems
D4083-89(2016): Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
D4105/D4105M-15e1: Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
D4106-15: Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
D4107-08(2013): Standard Test Method for Tritium in Drinking Water
D4127-18a: Standard Terminology Used with Ion-Selective Electrodes
D4128-18: Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
D4129-05(2013): Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
D413-98(2017): Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
D4130-15: Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
D4131-19: Standard Practice for Sampling Fish with Rotenone
D4132-82(2012): Standard Practice for Sampling Phytoplankton with Conical Tow Nets
D4133-82(2012): Standard Practice for Sampling Phytoplankton with Pumps
D4134-82(2012): Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler
D4135-82(2012): Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers
D4136-82(2012): Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles
D4137-82(2012): Standard Practice for Preserving Phytoplankton Samples
D4148-82(2012): Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method
D4149-82(2012): Standard Classification for Sampling Phytoplankton in Surface Waters
D4165-06(2012): Standard Test Method for Cyanogen Chloride in Water
D4186/D4186M-12e1: Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
D4189-07(2014): Standard Test Method for Silt Density Index (SDI) of Water
D4190-15: Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy
D4191-15: Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
D4192-15: Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
D4193-08(2013)e1: Standard Test Method for Thiocyanate in Water
D4194-03(2014): Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
D4195-08(2014): Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application
D4196-05(2011): Standard Test Method for Confirming the Sterility of Membrane Filters
D4198-82(2011): Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth
D4199-82(2011): Standard Test Methods for Autoclavability of Membrane Filters
D4200-82(2011): Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
D4211-82(2012): Classification for Fish Sampling
D4221-18: Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
D4230-02(2012): Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
D425-17: Standard Test Method for Centrifuge Moisture Equivalent of Soils
D4253-16: Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4254-16: Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4282-15: Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
D4298-04(2014)e1: Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
D4309-18: Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
D4318-17e1: Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
D4323-15: Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
D4328-18: Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines
D4373-14: Standard Test Method for Rapid Determination of Carbonate Content of Soils
D4380-12: Standard Test Method for Density of Bentonitic Slurries
D4381/D4381M-12: Standard Test Method for Sand Content by Volume of Bentonitic Slurries
D4382-18: Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
D4394-17: Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
D4395-17: Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
D4404-18: Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
D4409-95(2014): Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
D4410-16: Terminology for Fluvial Sediment
D4411-03(2014)e1: Standard Guide for Sampling Fluvial Sediment in Motion
D4412-15: Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
D4427-18: Standard Classification of Peat Samples by Laboratory Testing
D4430-00(2015): Standard Practice for Determining the Operational Comparability of Meteorological Measurements
D4435-13e1: Standard Test Method for Rock Bolt Anchor Pull Test
D4436-13e1: Standard Test Method for Rock Bolt Long-Term Load Retention Test
D4447-15: Standard Guide for Disposal of Laboratory Chemicals and Samples
D4448-01(2019): Standard Guide for Sampling Ground-Water Monitoring Wells
D4452-14: Standard Practice for X-Ray Radiography of Soil Samples
D4453-17: Standard Practice for Handling of High Purity Water Samples
D4456-17: Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
D4458-15: Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
D4472-08(2014): Standard Guide for Recordkeeping for Reverse Osmosis and Nanofiltration Systems
D4506-13e1: Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
D4511-11: Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
D4516-19: Standard Practice for Standardizing Reverse Osmosis Performance Data
D4517-15: Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
D4519-16: Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
D4520-18: Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
D4525-13e2: Standard Test Method for Permeability of Rocks by Flowing Air
D4531-15: Standard Test Methods for Bulk and Dry Density of Peat and Peat Products
D4532-15: Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
D4535-13e2: Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
D4542-15: Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
D4543-19: Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
D4544-19: Standard Practice for Estimating Peat Deposit Thickness
D4547-15: Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
D4548-11: Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
D4553-18: Standard Test Method for Determining In Situ Creep Characteristics of Rock
D4554-12: Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
D4597-10(2015): Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
D4599-14: Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
D4600-95(2016): Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
D4611-16: Standard Test Method for Specific Heat of Rock and Soil
D4612-16: Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
D4618-92(2017): Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
D4619-12(2018): Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
D4623-16: Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
D4630-19: Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
D4631-18: Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
D4633-16: Standard Test Method for Energy Measurement for Dynamic Penetrometers
D4643-17: Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
D4644-16: Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks
D4646-16: Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
D4647/D4647M-13: Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
D4658-15: Standard Test Method for Sulfide Ion in Water
D4687-14: Standard Guide for General Planning of Waste Sampling
D4696-18: Standard Guide for Pore-Liquid Sampling from the Vadose Zone
D4698-92(2013): Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
D4700-15: Standard Guide for Soil Sampling from the Vadose Zone
D4718/D4718M-15: Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
D4729-19: Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method
D4763-06(2012): Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
D4765-13(2018): Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
D4766-98(2014): Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
D4778-15: Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
D4785-08(2013)e1: Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
D4822-88(2014): Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
D4823-95(2014): Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
D4840-99(2018)e1: Standard Guide for Sample Chain-of-Custody Procedures
D4841-88(2018): Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
D4844-16: Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
D4856-11(2016): Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
D4861-17: Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
D4874-95(2014): Standard Test Method for Leaching Solid Material in a Column Apparatus
D4913-00(2016): Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
D4922-09(2016)e1: Standard Test Method for Determination of Radioactive Iron in Water
D4943-18: Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method
D4944-18: Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
D4959-16: Standard Test Method for Determination of Water Content of Soil By Direct Heating
D4971-16: Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
D4972-19: Standard Test Methods for pH of Soils
D4978-16: Standard Test Methods for Screening of Reactive Sulfides in Waste
D4979-19: Standard Practice for Physical Description Screening Analysis in Waste
D4981-19: Standard Practice for Screening of Oxidizers in Waste
D4982-12: Standard Test Methods for Flammability Potential Screening Analysis of Waste
D4986-18: Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
D4992-14e1: Standard Practice for Evaluation of Rock to be Used for Erosion Control
D4993-08(2014): Standard Practice for Calculation and Adjustment of Silica (SiO
D4994-19: Standard Practice for Recovery of Viruses from Wastewater Sludges
D5011-17: Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
D5012-01(2013): Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
D5013-18: Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
D5015-15: Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
D5048-18: Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
D5050-08(2015): Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
D5057-17: Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
D5058-12: Standard Practices for Compatibility of Screening Analysis of Waste
D5072-09(2016): Standard Test Method for Radon in Drinking Water
D5073-02(2013): Standard Practice for Depth Measurement of Surface Water
D5074-90(2014): Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
D5084-16a: Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
D5085-02(2013): Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
D5086-01(2013): Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
D5088-15a: Standard Practice for Decontamination of Field Equipment Used at Waste Sites
D5089-95(2014): Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
D5091-95(2014): Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
D5093-15e1: Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
D511-14: Standard Test Methods for Calcium and Magnesium In Water
D5111-12: Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
D512-12: Standard Test Methods for Chloride Ion In Water
D5121-15: Standard Practice for Preparation of Rock Slabs for Durability Testing
D5126-16e1: Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
D5127-13(2018): Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries
D5128-14: Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
D5129-95(2014)e1: Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions
D5130-95(2014): Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
D5131-90(2014): Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems
D5143-06(2015)e1: Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
D5157-19: Standard Guide for Statistical Evaluation of Indoor Air Quality Models
D516-16: Standard Test Method for Sulfate Ion in Water
D5172-91(2015): Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
D5173-15: Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
D5174-07(2013): Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
D5176-08(2015): Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
D5196-06(2018): Standard Guide for Bio-Applications Grade Water
D5220-14: Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
D5232-19: Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
D5240/D5240M-12(2013)e1: Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate
D5242-92(2013): Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
D5243-92(2013): Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
D5245-19: Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
D5256-14: Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
D5258-02(2013): Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
D5259-19: Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
D5269-15: Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
D5270-96(2014): Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
D5280-96(2013): Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
D5283-18: Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
D5298-16: Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
D5299/D5299M-18: Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
D5312/D5312M-12(2013): Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
D5313/D5313M-12(2013): Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
D5334-14: Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
D5335-14: Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
D5358-93(2019): Standard Practice for Sampling With a Dipper or Pond Sampler
D5359-98(2015): Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
D5366-96(2017): Standard Test Method for Determining the Dynamic Performance of a Wind Vane
D5370-14: Standard Specification for Pozzolanic Blended Materials in Construction Applications
D5387-93(2013): Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments
D5388-93(2013): Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method
D5389-93(2013): Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
D5390-93(2013): Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
D5391-14: Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
D5392-19: Standard Test Method for Isolation and Enumeration of
D5411-10(2015): Standard Practice for Calculation of Average Energy Per Disintegration (¯E) for a Mixture of Radionuclides in Reactor Coolant
D5413-93(2013): Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
D5447-17: Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem
D5462-13: Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
D5463-18: Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water
D5472/D5472M-14: Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
D5473/D5473M-15: Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
D5474-93(2012): Standard Guide for Selection of Data Elements for Groundwater Investigations
D5490-93(2014)e1: Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
D5495-03(2016): Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
D5499-94(2013): Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems
D5511-18: Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
D5513-15: Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
D5519-15: Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
D5520-18: Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
D5521/D5521M-18: Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
D5526-18: Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
D5530-15: Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
D5540-13: Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
D5541-94(2014): Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow
D5542-16: Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
D5543-15: Standard Test Method for Low-Level Dissolved Oxygen in Water
D5550-14: Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
D5578-04(2015): Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
D5607-16: Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
D5608-16: Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites
D5609-16: Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
D5610-94(2014): Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
D5611-94(2016): Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
D5612-94(2018): Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
D5613-94(2014): Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers
D5614-94(2014): Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
D5627-17: Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
D5633-04(2016): Standard Practice for Sampling with a Scoop
D5640-95(2014): Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water
D5658-13: Standard Practice for Sampling Unconsolidated Waste From Trucks
D5673-16: Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
D5674-95(2014): Standard Guide for Operation of a Gaging Station
D5680-14: Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
D5681-18: Standard Terminology for Waste and Waste Management
D5715-14: Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
D5716/D5716M-15: Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
D5718-13: Standard Guide for Documenting a Groundwater Flow Model Application
D5719-13: Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
D5722-14: Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
D5731-16: Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
D5737/D5737M-14: Standard Guide for Methods for Measuring Well Discharge
D5743-97(2013): Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
D5744-18: Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
D5745-15: Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
D5746-98(2016): Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
D5753-18: Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging
D5755-09(2014)e1: Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
D5759-12: Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
D5765-16: Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
D5777-18: Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
D5778-12: Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
D5779/D5779M-14: Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control
D5781/D5781M-18: Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
D5782-18: Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5783-18: Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5784/D5784M-18: Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
D5785/D5785M-15: Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
D5786-17: Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
D5787-14: Standard Practice for Monitoring Well Protection
D5788-95(2017): Standard Guide for Spiking Organics into Aqueous Samples
D5790-18: Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
D5792-10(2015): Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
D5810-96(2015): Standard Guide for Spiking into Aqueous Samples
D5811-08(2013): Standard Test Method for Strontium-90 in Water
D5830-14: Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
D5831-17: Standard Practice for Screening Fuels in Soils
D5833-12: Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans
D5835-95(2013): Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
D5836-08(2013): Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
D5839-15: Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
D5847-02(2012): Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
D5850-18: Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
D5851-95(2015): Standard Guide for Planning and Implementing a Water Monitoring Program
D5855/D5855M-15: Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
D5856-15: Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
D5872/D5872M-18: Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
D5873-14: Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
D5874-16: Standard Test Methods for Determination of the Impact Value (IV) of a Soil
D5875/D5875M-18: Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
D5876/D5876M-17: Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5878-19: Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D5879/D5879M-18: Standard Practice for Surface Site Characterization for On-Site Septic Systems
D5881-18: Standard Practice for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
D5883-18: Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
D5886-95(2018): Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
D5903-96(2017)e1: Standard Guide for Planning and Preparing for a Groundwater Sampling Event
D5904-02(2017): Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
D5905-98(2018): Standard Practice for the Preparation of Substitute Wastewater
D5907-18: Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
D5918-13e1: Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
D5919-96(2017): Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
D5920-14: Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method
D5922-18: Standard Guide for Analysis, Interpretation, and Modeling of Spatial Variation in Geostatistical Site Investigations
D5923-18: Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
D5924-18: Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
D5928-18a: Standard Practice for Screening of Waste for Radioactivity
D5932-08(2013)e1: Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
D5952-08(2015): Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)
D5953M-16: Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
D5955-02(2017)e1: Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
D5956-15: Standard Guide for Sampling Strategies for Heterogeneous Wastes
D596-01(2018): Standard Guide for Reporting Results of Analysis of Water
D5964-16: Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
D5979-96(2019)e1: Standard Guide for Conceptualization and Characterization of Groundwater Systems
D5981/D5981M-18: Standard Guide for Calibrating a Groundwater Flow Model Application
D5988-18: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil
D5995-18: Standard Guide for Environmental Site Investigation in Cold Regions
D5996-16: Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
D5997-15: Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
D6000/D6000M-15e1: Standard Guide for Presentation of Water-Level Information from Groundwater Sites
D6001-05(2012): Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
D6008-96(2014): Standard Practice for Conducting Environmental Baseline Surveys
D6009-19: Standard Guide for Sampling Waste Piles
D6011-96(2015): Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
D6028-17: Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
D6029-17: Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
D6030-15: Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
D6031/D6031M-96(2015): Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
D6032/D6032M-17: Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
D6033-16: Standard Guide for Describing the Functionality of a Groundwater Modeling Code
D6034-17: Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
D6035/D6035M-13: Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
D6036-96(2014): Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps
D6044-96(2015): Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
D6046-18: Standard Classification of Hydraulic Fluids for Environmental Impact
D6050-09(2016): Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
D6051-15: Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
D6052-97(2016): Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
D6056-96(2011): Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
D6057-96(2011): Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
D6058-96(2016): Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
D6059-96(2011): Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
D6061-01(2018)e1: Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
D6062-19: Standard Guide for Personal Samplers of Health-Related Aerosol Fractions
D6063-11(2018): Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
D6066-11: Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
D6067/D6067M-17: Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity
D6071-14: Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
D6081-19: Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
D6089-19: Standard Guide for Documenting a Groundwater Sampling Event
D6091-07(2014): Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
D6092-14e1: Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
D6137-97(2018): Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems
D6145-97(2018): Standard Guide for Monitoring Sediment in Watersheds
D6146-97(2018): Standard Guide for Monitoring Aqueous Nutrients in Watersheds
D6161-19: Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes
D6167-19: Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
D6169/D6169M-13: Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
D6176-97(2015): Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
D6177-19: Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
D6178-14: Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
D6196-15e1: Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air
D6209-13: Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
D6230-13: Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
D6234-13: Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
D6235-18: Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
D6245-18: Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
D6246-08(2018): Standard Practice for Evaluating the Performance of Diffusive Samplers
D6249-19: Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
D6271-10(2016): Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
D6274-18: Standard Guide for Conducting Borehole Geophysical Logging - Gamma
D6281-15: Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
D6285-99(2016): Standard Guide for Locating Abandoned Wells
D6286-19: Standard Guide for Selection of Drilling and Direct Push Methods for Geotechnical and Environmental Subsurface Site Characterization
D6306-17: Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air
D6311-98(2014): Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
D6312-17: Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities
D6317-15: Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
D6318-03(2014): Standard Practice for Calibrating a Fathometer Using a Bar Check Method
D632-12: Standard Specification for Sodium Chloride
D6323-19: Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
D6326-08(2014): Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers
D6327-10(2016): Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
D6328-18: Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
D6329-98(2015): Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
D6330-98(2014): Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
D6332-12(2017): Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
D6346-17: Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs
D6348-12e1: Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
D635-18: Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
D6362-98(2018): Standard Practice for Certificates of Reference Materials for Water Analysis
D6363-98(2013): Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
D6420-18: Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
D6429-99(2011)e1: Standard Guide for Selecting Surface Geophysical Methods
D6430-18: Standard Guide for Using the Gravity Method for Subsurface Site Characterization
D6431-18: Standard Guide for Using the Direct Current Resistivity Method for Subsurface Site Characterization
D6432-11: Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
D6449-99(2015)e1: Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
D6452-18: Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations
D6459-19: Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
D6460-19: Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D6461/D6461M-18: Standard Specifications for Silt Fence Materials
D6462-19: Standard Practice for Silt Fence Installation and Maintenance
D6473-15: Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control
D6475-17: Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
D6480-19: Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
D6485-18: Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
D6494-99(2015): Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
D6502-10(2015): Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
D6503-19: Standard Test Method for Enterococci in Water Using Enterolert
D6504-11(2016)e1: Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
D6512-07(2014): Standard Practice for Interlaboratory Quantitation Estimate
D6517-18: Standard Guide for Field Preservation of Ground Water Samples
D6522-11: Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
D6523-00(2014)e1: Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
D6530-00(2013): Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
D6538-12(2019): Standard Guide for Sampling Wastewater With Automatic Samplers
D6539-13: Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air
D6552-06(2016): Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
D6564/D6564M-17: Standard Guide for Field Filtration of Groundwater Samples
D6568-00(2018): Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
D6569-14: Standard Test Method for On-Line Measurement of pH
D6572-13e2: Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
D6581-18: Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
D6589-05(2015): Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
D6599-00(2014)e2: Standard Practice for Construction of Live Fascines on Slopes
D6620-19: Standard Practice for Asbestos Detection Limit Based on Counts
D6634/D6634M-14: Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells
D6635-15: Standard Test Method for Performing the Flat Plate Dilatometer
D6639-18: Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations
D6661-17: Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
D6670-18: Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
D6684-18: Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems
D6685-01(2015): Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
D6689-01(2019)e1: Standard Guide for Optimizing, Controlling, and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
D6691-17: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
D6696-16: Standard Guide for Understanding Cyanide Species
D6698-14: Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
D6699-16: Standard Practice for Sampling Liquids Using Bailers
D6700-19: Standard Guide for Use of Scrap Tires as Tire-Derived Fuel
D6706-01(2013): Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
D6711-15: Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
D6724/D6724M-16: Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
D6725/D6725M-16: Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
D6726-15: Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction
D6727/D6727M-16: Standard Guide for Conducting Borehole Geophysical Logging—Neutron
D6758-18: Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
D6759-16: Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
D6765-13: Standard Practice for Live Staking
D6780/D6780M-19: Standard Test Methods for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
D6785-13: Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
D6800-18: Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
D6803-19: Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Architectural Coatings Using Small-Scale Environmental Chambers
D6807-17: Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from
D6808-02(2018)e1: Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
D6820-18: Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Site Characterization
D6825-14e1: Standard Guide for Placement of Riprap Revetments
D6826-05(2014)e1: Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
D6830-02(2016): Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
D6832-13(2018): Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
D6836-16: Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
D6850-18: Standard Guide for QC of Screening Methods in Water
D6868-19: Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
D6877-13(2018): Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
D6888-16: Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
D6907-05(2016): Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
D6911-15: Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
D6914/D6914M-16: Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
D6919-17: Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
D6954-18: Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
D6966-18: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
D698-12e2: Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
D6982-09(2016): Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
D6994-15: Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
D7014-18: Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses
D7034-18: Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
D7035-16: Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7036-16: Standard Practice for Competence of Air Emission Testing Bodies
D7045-17: Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities
D7046-11: Standard Guide for Use of the Metal Detection Method for Subsurface Exploration
D7048-16: Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
D7049-17: Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres
D7052/D7052M-17: Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)
D7069-04(2015): Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
D7070-16: Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
D7099-04(2018): Standard Terminology Relating to Frozen Soil and Rock
D7100-11: Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
D7101-13e1: Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
D7126-15: Standard Test Method for On-Line Colorimetric Measurement of Silica
D7128-18: Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
D7145-05(2015): Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
D7202-15: Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
D7204-15: Standard Practice for Sampling Waste Streams on Conveyors
D7208-14e1: Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D7237-18: Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
D7242/D7242M-06(2013)e1: Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
D7262-10(2016)e1: Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
D7263-09(2018)e2: Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
D7276-16: Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
D7277-16: Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
D7282-14: Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
D7284-13(2017): Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
D7294-13: Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest
D7295-18: Standard Practice for Sampling Combustion Effluents and Other Stationary Sources for the Subsequent Determination of Hydrogen Cyanide
D7296-18: Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
D7299-12: Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
D7300-18: Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
D7309-19: Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
D7316-14: Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions
D7338-14: Standard Guide for Assessment Of Fungal Growth in Buildings
D7339-18: Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
D7351-19: Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications
D7352-18: Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods
D7353-07(2013): Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
D7354-11: Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings
D7362-14: Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition
D7363-13a: Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
D7365-09a(2015): Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
D7366-08(2013): Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
D7367-19e2: Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
D7380-15: Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
D7390-18e1: Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
D7392-07(2013): Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
D7439-14: Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
D7440-08(2015)e1: Standard Practice for Characterizing Uncertainty in Air Quality Measurements
D7458-14: Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
D7459-08(2016): Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
D7475-11: Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
D7485-16: Standard Test Method for Determination of Nonylphenol, p-
D7503-18: Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
D7510-10(2016)e1: Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
D7511-12(2017)e1: Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
D7512-09(2015): Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
D7513-17: Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
D7520-16: Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
D7521-16: Standard Test Method for Determination of Asbestos in Soil
D7535-09(2015): Standard Test Method for Lead-210 in Water
D7560-16: Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
D7572-15: Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil
D7573-18ae1: Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
D7574-16: Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
D7597-16(2017): Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry
D7598-16(2017): Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
D7600-16(2017): Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
D7601-19: Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
D7614-12: Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
D7626-19: Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
D7648/D7648M-18: Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
D7659-10(2015): Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
D7663-12(2018)e1: Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
D7664-10(2018)e1: Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
D7677-16: Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
D7699/D7699M-11: Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
D7707-11(2016): Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
D7708-14: Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
D7712-18: Standard Terminology for Sampling and Analysis of Asbestos
D7725-17: Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
D7726-11(2016)e1: Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
D7727-11(2016): Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant
D7728-18: Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
D7729-12(2018)e1: Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
D7730-17: Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
D7747/D7747M-11(2018): Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
D7749-11(2018): Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
D7758-17: Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
D7760-18: Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
D7762-18: Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
D7765-18a: Standard Practice for Use of Foundry Sand in Structural Fill and Embankments
D7770-12: Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
D7773-19: Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO
D7780-12: Standard Practice for Geospatial Data for Representing Coal Mining Features
D7781-14: Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase
D7782-13: Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
D7783-13: Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
D7784-12: Standard Practice for the Rapid Assessment of Gamma-ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry
D7788-14: Standard Practice for Collection of Total Airborne Fungal Structures via Inertial Impaction Methodology
D7789-12: Standard Practice for Collection of Fungal Material from Surfaces by Swab
D7822-18: Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
D7831-13: Standard Practice for Sampling of Tanks by Field Personnel
D7851-17: Standard Guide for Design of Sustainable, Low-Slope Roofing Systems
D7858-13(2018): Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
D7859-19: Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
D7864/D7864M-15: Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
D7886-14: Standard Practice for Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks
D7903-14: Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges
D7910-14: Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift
D7928-17: Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
D7929-14: Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
D7931-18: Standard Guide for Specifying Drainage Geocomposites
D7938-15: Standard Practice for Sampling of C-14 in Gaseous Effluents
D7939-15: Standard Test Method for Rapid Radiochemical Determination of Americium-241 in Water
D7941/D7941M-14: Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
D7948-14e1: Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
D7953-14: Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method
D7982-15: Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels
D7986-17a: Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
D7991-15: Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy Marine Sediment under Controlled Laboratory Conditions
D8001-16e1: Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
D8002-15e1: Standard Test Method for Modified Fouling Index (MFI-0.45) of Water
D8006-16: Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
D8018-15: Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
D8024-16: Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
D8025-16: Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
D8026-16: Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
D8027-17: Standard Practice for Concentration of Select Radionuclides Using MnO
D8028-17: Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
D8030/D8030M-19: Standard Practice for Sample Preparation for GCCM
D8037/D8037M-16: Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils
D8058-19: Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
D8064-16: Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
D8068-19: Standard Practice for Collection of Culturable Airborne Fungi or Bacteria on Agar Plates by Inertial Impaction Systems
D807-18: Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)
D8084-17: Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water
D8102-17: Standard Practice for Manufacturing Quality Control of Geotextiles
D8107-18: Standard Practice for Determining Sediment Pond Skimmer Flow Rate
D8135-17: Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
D8141-17: Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments
D8142-17: Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
D8155-17: Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
D8167/D8167M-18a: Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
D8172-18: Standard Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes
D8174-18: Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
D8175-18: Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
D8193-18: Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
D854-14: Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
D857-17: Standard Test Method for Aluminum in Water
D859-16: Standard Test Method for Silica in Water
D887-13: Standard Practices for Sampling Water-Formed Deposits
D888-18: Standard Test Methods for Dissolved Oxygen in Water
D932-15: Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits
D933-84(2012): Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
D934-13: Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
E1022-94(2013): Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks
E1023-84(2014): Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses
E1037-15: Standard Test Method for Measuring Particle Size Distribution of RDF-5
E104-02(2012): Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
E1107-15: Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
E1108-86(2017): Standard Test Method for Determination of the Recovery of a Product in a
E1109-19: Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
E1163-10(2019): Standard Test Method for Estimating Acute Oral Toxicity in Rats
E1167-15: Standard Guide for Radiation Protection Program for Decommissioning Operations
E1168-95(2013): Standard Guide for Radiological Protection Training for Nuclear Facility Workers
E1191-03a(2014): Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
E1192-97(2014): Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians
E1193-97(2012): Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
E1197-12: Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
E1198-19: Standard Practice for Sampling Zooplankton with Pumps
E1199-19: Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
E1200-19: Standard Practice for Preserving Zooplankton Samples
E1201-19: Standard Practice for Sampling Zooplankton with Conical Tow Nets
E1218-04(2012): Standard Guide for Conducting Static Toxicity Tests with Microalgae
E1241-05(2013): Standard Guide for
E1242-97(2014): Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis
E1248-90(2017): Standard Practice for Shredder Explosion Protection
E1266-12: Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
E1295-01(2013): Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with
E1366-11(2016): Standard Practice for Standardized Aquatic Microcosms: Fresh Water
E1368-14: Standard Practice for Visual Inspection of Asbestos Abatement Projects
E1370-14: Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
E1391-03(2014): Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates
E1415-91(2012): Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3
E1439-12(2019): Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX)
E1440-91(2012): Standard Guide for Acute Toxicity Test with the Rotifer Brachionus
E1463-92(2012): Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From the West Coast of the United States
E1474-14: Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
E1494-18: Standard Practice for Testing Physical Properties of Friable Surfacing Materials
E1497-17: Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids
E1498-92(2012): Standard Guide for Conducting Sexual Reproduction Tests with Seaweeds
E1525-02(2014): Standard Guide for Designing Biological Tests with Sediments
E1527-13: Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
E1542-18: Standard Terminology Relating to Occupational Health and Safety
E1560-18: Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
E1562-00(2013): Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids
E1563-98(2012): Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos
E1583-17: Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
E1604-12: Standard Guide for Behavioral Testing in Aquatic Toxicology
E1611-00(2013): Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids
E1613-12: Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
E1619-11(2016): Standard Test Method for Chronic Oral Toxicity Study in Rats
E1645-16: Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
E1676-12: Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Enchytraeus albidus
E1678-15: Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
E1689-95(2014): Standard Guide for Developing Conceptual Site Models for Contaminated Sites
E1706-19: Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
E1711-12: Standard Guide for Measurement of Behavior During Fish Toxicity Tests
E1726-16: Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
E1728-16: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
E1733-95(2014): Standard Guide for Use of Lighting in Laboratory Testing
E1739-95(2015): Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites
E1753-19: Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
E1760-16: Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity
E1768-95(2013): Standard Guide for Ventilatory Behavioral Toxicology Testing of Freshwater Fish
E1775-16: Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
E1792-03(2016): Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
E1819-15: Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
E1841-04(2012): Standard Guide for Conducting Renewal Phytotoxicity Tests With Freshwater Emergent Macrophytes
E1847-96(2013): Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines
E1848-96(2014): Standard Guide for Selecting and Using Ecological Endpoints for Contaminated Sites
E1849-96(2013): Standard Guide for Fish and Wildlife Incident Monitoring and Reporting
E1850-04(2019): Standard Guide for Selection of Resident Species as Test Organisms for Aquatic and Sediment Toxicity Tests
E1903-11: Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process
E1908-16: Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
E1963-09(2014): Standard Guide for Conducting Terrestrial Plant Toxicity Tests
E2018-15: Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
E2019-03(2019): Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air
E2020-16: Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at Contaminated Sites
E2045-99(2014): Standard Practice for Detailed Clinical Observations of Test Animals
E2060-06(2014): Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
E2081-00(2015): Standard Guide for Risk-Based Corrective Action
E2091-19: Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
E2107-06(2014): Standard Practice for Environmental Regulatory Compliance Audits
E2115-19: Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
E2120-10(2016): Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
E2144-11(2016): Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
E2169-17: Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
E2172-01(2014): Standard Guide for Conducting Laboratory Soil Toxicity Tests with the Nematode Caenorhabditis elegans
E2186-02a(2016): Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
E2201-13: Standard Terminology for Coal Combustion Products
E2202-02(2016): Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
E2205/E2205M-02(2014): Standard Guide for Risk-Based Corrective Action for Protection of Ecological Resources
E2243-13(2019): Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation
E2252-18: Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
E2255/E2255M-18a: Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
E2256-19: Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service
E2271/E2271M-18: Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
E2278-13(2019): Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage
E2317-04(2012): Standard Guide for Conducting Renewal Microplate-Based Life-Cycle Toxicity Tests with a Marine Meiobenthic Copepod
E2320-04(2018): Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
E2350-19: Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems
E2356-18: Standard Practice for Comprehensive Building Asbestos Surveys
E2365-14: Standard Guide for Environmental Compliance Performance Assessment
E2385-11(2016): Standard Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality
E2394-11: Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products
E2421-15: Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities
E2435-05(2015): Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties
E2455-06(2013): Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels
E2523-13(2018): Standard Terminology for Metalworking Fluids and Operations
E2531-06(2014): Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface
E2552-16: Standard Guide for Assessing the Environmental and Human Health Impacts of New Compounds for Military Use
E2565-15: Standard Guide for Consensus-based Process for an Occupational Safety and Health Standard that Includes an Occupational Exposure Guideline
E2591-07(2013): Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians
E2600-15: Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions
E2616-09(2014): Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations
E2657-16: Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
E2681-13: Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum
E2694-16: Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
E2717-18: Standard Practice for Estimating the Environmental Load of Residential Wastewater
E2718-16: Standard Guide for Financial Disclosures Attributed to Climate Change
E2725-19: Standard Guide for Basic Assessment and Management of Greenhouse Gases
E2727-18: Standard Practice for Assessment of Rainwater Quality
E2733-10(2015): Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems
E274/E274M-15: Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
E2741-11: Standard Specification for Evaluation and Selection of Destinations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2742-11: Standard Specification for Evaluation and Selection of Exhibits for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2743-11: Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2745-11: Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2746-11: Standard Specification for Evaluation and Selection of Communication and Marketing Materials for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2747-11: Standard Specification for Evaluation and Selection of Onsite Offices for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2772-13e1: Standard Specification for Evaluation and Selection of Accommodations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2773-11: Standard Specification for Evaluation and Selection of Food and Beverage for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2774-11: Standard Specification for Evaluation and Selection of Venues for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2790-11: Standard Guide for Identifying and Complying With Continuing Obligations
E2856-13: Standard Guide for Estimation of LNAPL Transmissivity
E2876-13: Standard Guide for Integrating Sustainable Objectives into Cleanup
E2888-12(2019): Standard Practice for Process for Inactivation of Rodent Retrovirus by pH
E2889-12(2017): Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment
E2892-15: Standard Test Method for Odor and Flavor Transfer from Materials in Contact with Municipal Drinking Water
E2893-16e1: Standard Guide for Greener Cleanups
E2913/E2913M-19: Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
E2914/E2914M-19: Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
E2942-17: Standard Guide for Security of Tank Farm Installations for Compliance with Spill Prevention, Control and Countermeasure Plan (SPCC) Regulations
E2963-16: Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
E2979-18: Standard Classification for Discarded Materials from Manufacturing Facilities and Associated Support Facilities
E2986-18: Standard Guide for Evaluation of Environmental Aspects of Sustainability of Manufacturing Processes
E2992/E2992M-17: Standard Test Method for Evaluating Response Robot Mobility: Traverse Sand Terrain
E2993-16: Standard Guide for Evaluating Potential Hazard as a Result of Methane in the Vadose Zone
E3004-15e1: Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
E3021/E3021M-15(2019): Standard Guide for Evaluating the Relative Effectiveness of Building Systems to Resist the Passage of Products of Combustion Based on the Aggregation of Leakage Rates
E3032-15e1: Standard Guide for Climate Resiliency Planning and Strategy
E3033-16: Standard Guide for Beneficial Use of Landfills and Chemically Impacted Sites
E3053-18e1: Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
E3069-19: Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall
E3073-17: Standard Guide for Development of Waste Management Plan for Construction, Deconstruction, or Demolition Projects
E3074/E3074M-16: Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities
E3075-18: Standard Test Method for Water Immersion and Drying for Evaluation of Flood Damage Resistance
E3095-17: Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
E3123-18: Standard Guide for Recognition and Derecognition of Environmental Liabilities
E3131-17: Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders
E337-15: Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
E477-13e1: Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
E662-19: Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
E701-80(2018): Standard Test Methods for Municipal Ferrous Scrap
E702-85(2015): Standard Specification for Municipal Ferrous Scrap
E708-79(2017): Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
E724-98(2012): Standard Guide for
E729-96(2014): Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
E775-15: Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
E776-16: Standard Test Method for Determination of Forms of Chlorine in Refuse-Derived Fuel
E777-17a: Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
E778-15: Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples
E790-15: Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples
E791-08(2016): Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
E829-16: Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
E848-94(2016): Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
E857-05(2019): Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
E884-82(2012): Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
E887-15: Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
E889-82(2014): Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
E943-08(2014): Standard Terminology Relating to Biological Effects and Environmental Fate
E953/E953M-16: Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash
E956-83(2015): Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
E959-83(2018): Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment
F1011-07(2013): Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
F1084-08(2018): Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
F1093-99(2018): Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
F1127-07(2013): Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel
F1129/F1129M-12: Standard Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids
F1209-19: Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
F1210-19: Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
F1231-19: Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
F1279-19: Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
F1280-19: Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces
F1322-15: Standard Guide for Selection of Shipboard Incinerators
F1323-14: Standard Specification for Shipboard Incinerators
F1413/F1413M-18: Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems
F1460/F1460M-18: Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
F1523-94(2018): Standard Guide for Selection of Booms in Accordance With Water Body Classifications
F1524-95(2013): Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills
F1599-95(2018): Standard Guide for Collecting Performance Data on Temporary Storage Devices
F1607-95(2018): Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
F1657/F1657M-96(2018): Standard Practice for Emergency Joining of Booms with Incompatible Connectors
F1686-16: Standard Guide for Surveys to Document and Assess Oiling Conditions
F1687-16: Standard Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines
F1693-17: Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
F1737/F1737M-19: Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems
F1738-19: Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
F1778-97(2016): Standard Guide for Selection of Skimmers for Oil-Spill Response
F1779-08(2014): Standard Practice for Reporting Visual Observations of Oil on Water
F1780-18: Standard Guide for Estimating Oil Spill Recovery System Effectiveness
F1788-19: Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
F1799-97(2015): Standard Guide for Shipboard Generated Waste Management Audits
F1872-17: Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations
F1899-14a: Standard Specification for Food Waste Pulper Without Waterpress Assembly
F1990-19: Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices
F2008-00(2018): Standard Guide for Qualitative Observations of Skimmer Performance
F2067-19: Standard Practice for Development and Use of Oil-Spill Trajectory Models
F2084/F2084M-01(2018): Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments
F2152-07(2018): Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
F2204/F2204M-16: Standard Guide for Describing Shoreline and Inland Response Techniques
F2205-19: Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments
F2230-19: Standard Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
F2304-10(2016)e1: Standard Practice for Sealing of Sewers Using Chemical Grouting
F2327-15: Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
F2363/F2363M-17: Standard Specification for Sewage and Graywater Flow Through Treatment Systems
F2414-04(2016): Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
F2438-04(2017): Standard Specification for Oil Spill Response Boom Connection: Slide Connector
F2454-05(2016)e1: Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
F2464-12(2018): Standard Guide for Cleaning of Various Oiled Shorelines and Habitats
F2465/F2465M-05(2016): Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems
F2532-19: Standard Guide for Determining Net Environmental Benefit of Dispersant Use
F2533-07(2013): Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels
F2550-13(2018): Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall
F2551-09(2016): Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
F2577-14: Standard Guide for Assessment of Materials and Products for Declarable Substances
F2617-15: Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
F2682-07(2018): Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
F2683-11(2017): Standard Guide for Selection of Booms for Oil-Spill Response
F2709-19: Standard Test Method for Determining a Measured Nameplate Recovery Rate of Stationary Oil Skimmer Systems
F2725-19: Standard Guide for European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange
F2823-15: Standard Guide for In-Situ Burning of Oil Spills in Marshes
F2853-10(2015): Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
F2916-19: Standard Practice for Environmental Impact Analysis of Commercial Food Service Equipment
F2926-18: Standard Guide for Selection and Operation of Vessel-mounted Camera Systems
F2986-12(2017): Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
F3013-13(2018): Standard Test Method for Density of Topsoil and Blended Soils In-place by the Core Displacement Method
F307-13: Standard Practice for Sampling Pressurized Gas for Gas Analysis
F312-08(2016): Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
F3195-16: Standard Guide for Estimating the Volume of Oil Consumed in an In-Situ Burn
F3208-18: Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices
F3218-19: Standard Practice for Documenting Environmental Conditions for Utilization with A-UGV Test Methods
F3227/F3227M-17: Standard Specification for Environmental Systems in Small Aircraft
F3251-17: Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Baffled Flask
F327-08(2015): Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
F331-13: Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
F51/F51M-00(2014)e1: Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
F625/F625M-94(2017): Standard Practice for Classifying Water Bodies for Spill Control Systems
F631-15: Standard Guide for Collecting Skimmer Performance Data in Controlled Environments
F715-07(2018): Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
F716-18: Standard Test Methods for Sorbent Performance of Absorbents for Use on Chemical and Light Hydrocarbon Spills
F778-88(2014): Standard Methods for Gas Flow Resistance Testing of Filtration Media
F818-16: Standard Terminology Relating to Spill Response Booms and Barriers
F917-19: Standard Specification for Commercial Food Waste Disposers
F962-04(2018): Standard Specification for Oil Spill Response Boom Connection: Z-Connector
G101-04(2015): Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
G113-16: Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
G116-99(2015): Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
G126-16: Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
G140-02(2019): Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
G141-09(2013): Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
G144-01(2014): Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
G147-17: Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
G156-17: Standard Practice for Selecting and Characterizing Weathering Reference Materials
G158-98(2016): Standard Guide for Three Methods of Assessing Buried Steel Tanks
G162-18: Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
G166-00(2011): Standard Guide for Statistical Analysis of Service Life Data
G169-01(2013): Standard Guide for Application of Basic Statistical Methods to Weathering Tests
G172-19: Standard Guide for Statistical Analysis of Accelerated Service Life Data
G178-16: Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
G179-04(2019): Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
G187-18: Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
G200-09(2014): Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
G201-16: Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
G210-13(2018): Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
G213-17: Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
G24-13: Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
G33-99(2015): Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
G50-10(2015): Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
G51-18: Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
G52-00(2016)e1: Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
G57-06(2012): Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
G63-15: Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
G7/G7M-13: Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
G72/G72M-15: Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
G74-13: Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
G78-15: Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
G84-89(2012): Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
G86-17: Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
G88-13: Standard Guide for Designing Systems for Oxygen Service
G90-17: Standard Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight
G91-11(2018): Standard Practice for Monitoring Atmospheric SO
G92-86(2015): Standard Practice for Characterization of Atmospheric Test Sites
G97-18: Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
Copyright © 1996 - 2014 ASTM. All Rights Reserved. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA
