All Chemicals Standards

Search within Chemicals


A587-96(2012): Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

B727-04(2014): Standard Practice for Preparation of Plastics Materials for Electroplating

B827-05(2014): Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

C10/C10M-14: Standard Specification for Natural Cement

C1016-14: Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

C1017/C1017M-13e1: Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

C1021-08(2014): Standard Practice for Laboratories Engaged in Testing of Building Sealants

C1023-10(2014): Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards

C1025-15: Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

C1036-16: Standard Specification for Flat Glass

C1039-85(2015): Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

C1048-12e1: Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass

C1053-00(2015): Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications

C1054-13: Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens

C1059/C1059M-13: Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

C1069-09(2014): Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

C1070-01(2014): Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering

C1073-12: Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

C108-46(2013): Standard Symbols for Heat Transmission

C1083-06(2015): Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials

C1087-16: Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

C109/C109M-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

C1097-13: Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures

C1099-07(2012): Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures

C110-16e1: Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C1105-08a(2016): Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

C1113/C1113M-09(2013): Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)

C1115-17: Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

C113-14: Standard Test Method for Reheat Change of Refractory Brick

C1135-15: Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

C114-15: Standard Test Methods for Chemical Analysis of Hydraulic Cement

C1147-14: Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics

C1157/C1157M-17: Standard Performance Specification for Hydraulic Cement

C1161-13: Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

C1166-06(2016): Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

C1171-16: Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories

C1172-14: Standard Specification for Laminated Architectural Flat Glass

C1175-99a(2010): Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics

C1179-15: Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

C1182-09(2014): Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation

C1183/C1183M-13: Standard Test Method for Extrusion Rate of Elastomeric Sealants

C1184-14: Standard Specification for Structural Silicone Sealants

C1193-16: Standard Guide for Use of Joint Sealants

C1198-09(2013): Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance

C1203-04(2014): Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel

C1211-13: Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures

C1212-98(2015): Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids

C1216/C1216M-13: Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

C1222-17: Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

C1223-09(2014): Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories

C1239-13: Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics

C1241-14: Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

C1246-17: Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

C1247-14: Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

C1248-08(2012): Standard Test Method for Staining of Porous Substrate by Joint Sealants

C1249-06a(2010): Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

C1253-14: Standard Test Method for Determining the Outgassing Potential of Sealant Backing

C1256-93(2013): Standard Practice for Interpreting Glass Fracture Surface Features

C1257-15: Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

C1259-15: Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration

C1260-14: Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

C1265-17: Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

C1266-17: Standard Test Method for Flow Characteristics of Preformed Tape Sealants

C1271-99(2012): Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

C1273-15: Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures

C1274-12: Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption

C1275-16: Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature

C1279-13: Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

C1281-16: Standard Specification for Preformed Tape Sealants for Glazing Applications

C1291-16: Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Monolithic Advanced Ceramics

C1292-16: Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

C1293-08b(2015): Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

C1294-15: Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

C1300-95(2016): Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method

C1301-95(2014): Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

C1311-14: Standard Specification for Solvent Release Sealants

C1322-15: Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics

C1323-16: Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature

C1326-13: Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics

C1327-15: Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics

C1328/C1328M-12: Standard Specification for Plastic (Stucco) Cement

C1329/C1329M-16a: Standard Specification for Mortar Cement

C133-97(2015): Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories

C1330-02(2013): Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

C1331-01(2012): Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method

C1332-01(2013): Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique

C1336-96(2014): Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions

C1337-17: Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures

C134-95(2016): Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

C1341-13: Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

C1349-17: Standard Specification for Architectural Flat Glass Clad Polycarbonate

C135-96(2015): Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion

C1350M-96(2013): Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)

C1351M-96(2017): Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]

C1356-07(2012): Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure

C1358-13: Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures

C1359-13: Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures

C1360-17: Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

C1361-10(2015): Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures

C1365-06(2011): Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

C1366-04(2013): Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures

C1367-06(2012): Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

C1368-10(2017): Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature

C1369-07(2014): Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

C1375-00(2014): Standard Guide for Substrates Used in Testing Building Seals and Sealants

C1376-15: Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass

C1382-16: Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

C1392-00(2014): Standard Guide for Evaluating Failure of Structural Sealant Glazing

C1394-03(2012): Standard Guide for In-Situ Structural Silicone Glazing Evaluation

C1401-14: Standard Guide for Structural Sealant Glazing

C1407-98(2016): Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes

C141/C141M-14: Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

C1414-01(2014): Standard Practice for The Separation of Americium from Plutonium by Ion Exchange

C1415-14: Standard Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry

C1419-14: Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus

C1421-16: Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature

C1422/C1422M-15: Standard Specification for Chemically Strengthened Flat Glass

C1424-15: Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature

C1425-13: Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures

C1426-14: Standard Practices for Verification and Calibration of Polarimeters

C1438-13(2017): Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

C1439-13: Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

C1440-08(2013)e1: Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

C1442-14: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

C1443-99(2016): Standard Specification for Glasses, Portlight, Circular, Fully Tempered

C1445-13: Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table

C1446-11: Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories

C146-94a(2014): Standard Test Methods for Chemical Analysis of Glass Sand

C1464-16: Standard Specification for Bent Glass

C1465-08(2013)e1: Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures

C1466-00(2016): Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware

C1468-13: Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature

C1469-10(2015): Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

C147-86(2015): Standard Test Methods for Internal Pressure Strength of Glass Containers

C1470-06(2013): Standard Guide for Testing the Thermal Properties of Advanced Ceramics

C1472-16: Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

C148-17: Standard Test Methods for Polariscopic Examination of Glass Containers

C1481-12(2017): Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

C1486-00(2012): Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings

C1487-02(2012): Standard Guide for Remedying Structural Silicone Glazing

C1489-15: Standard Specification for Lime Putty for Structural Purposes

C149-14: Standard Test Method for Thermal Shock Resistance of Glass Containers

C1494-13: Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder

C1495-16: Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics

C1499-15: Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature

C150/C150M-17: Standard Specification for Portland Cement

C1501-14: Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

C1503-08(2013): Standard Specification for Silvered Flat Glass Mirror

C1508-01(2011): Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy

C1509-02(2012): Standard Specification for Beaded Process Glass Pipe and Fittings

C1510-01(2016): Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry

C1518-16: Standard Specification for Precured Elastomeric Silicone Joint Sealants

C1519-10(2017): Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

C1520-02(2015)e1: Standard Guide for Paintability of Latex Sealants

C1521-13: Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

C1523-17: Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

C1525-04(2013): Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching

C1529-06a(2011): Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses

C1536-10: Standard Test Method for Measuring the Yield for Aerosol Foam Sealants

C1545-02(2016): Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer

C1548-02(2012): Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration

C1557-14: Standard Test Method for Tensile Strength and Young’s Modulus of Fibers

C1564-15: Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

C1565-09: Standard Test Method for Determination of Pack-Set Index of Portland Cement

C1567-13: Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

C1576-05(2017): Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature

C158-02(2017): Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

C1582/C1582M-11(2017)e1: Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

C1583/C1583M-13: Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

C16-03(2012): Standard Test Method for Load Testing Refractory Shapes at High Temperatures

C1600/C1600M-17: Standard Specification for Rapid Hardening Hydraulic Cement

C1605-04(2014): Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry

C1606-10(2014): Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware

C1607-12(2016): Standard Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware

C162-05(2015): Standard Terminology of Glass and Glass Products

C1620-16: Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

C1622/C1622M-10(2016)e1: Standard Specification for Cold-Weather Admixture Systems

C1624-05(2015): Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing

C1635-16: Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

C1642-14: Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

C1643-14: Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

C1648-12: Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass

C1649-14: Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated

C1650-14: Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated

C1651-11: Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass

C1652/C1652M-14: Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids

C1656-13: Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile

C1663-09: Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test

C1674-16: Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures

C1678-10(2015): Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses

C1679-14: Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry

C1681-14: Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

C1683-10(2015): Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics

C1684-13e1: Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength

C169-16: Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass

C1702-17: Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

C1707-11: Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

C1720-11e1: Standard Test Method for Determining Liquidus Temperature of Immobilized Waste Glasses and Simulated Waste Glasses

C1735-17: Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

C1736-11: Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device

C1737-16: Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

C1756-17: Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs

C1773-17: Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature

C179-14: Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens

C181-11: Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics

C182-88(2013): Standard Test Method for Thermal Conductivity of Insulating Firebrick

C186-15a: Standard Test Method for Heat of Hydration of Hydraulic Cement

C198-09(2013): Standard Test Method for Cold Bonding Strength of Refractory Mortar

C199-84(2016): Standard Test Method for Pier Test for Refractory Mortars

C20-00(2015): Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water

C201-93(2013): Standard Test Method for Thermal Conductivity of Refractories

C202-93(2013): Standard Test Method for Thermal Conductivity of Refractory Brick

C206-14: Standard Specification for Finishing Hydrated Lime

C207-06(2011): Standard Specification for Hydrated Lime for Masonry Purposes

C210-95(2014): Standard Test Method for Reheat Change of Insulating Firebrick

C219-14a: Standard Terminology Relating to Hydraulic Cement

C224-78(2014): Standard Practice for Sampling Glass Containers

C225-85(2014): Standard Test Methods for Resistance of Glass Containers to Chemical Attack

C226-12: Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

C227-10: Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

C230/C230M-14: Standard Specification for Flow Table for Use in Tests of Hydraulic Cement

C233/C233M-14: Standard Test Method for Air-Entraining Admixtures for Concrete

C24-09(2013): Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials

C242-15: Standard Terminology of Ceramic Whitewares and Related Products

C25-11e2: Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

C260/C260M-10a(2016): Standard Specification for Air-Entraining Admixtures for Concrete

C267-01(2012): Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

C271/C271M-16: Standard Test Method for Density of Sandwich Core Materials

C272/C272M-16: Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions

C273/C273M-16: Standard Test Method for Shear Properties of Sandwich Core Materials

C288-87(2014): Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide

C297/C297M-16: Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

C307-03(2012): Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

C308-00(2012)e1: Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

C323-56(2016): Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays

C324-01(2014): Standard Test Method for Free Moisture in Ceramic Whiteware Clays

C325-07(2014): Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays

C326-09(2014): Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays

C329-88(2016): Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials

C336-71(2015): Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation

C338-93(2013): Standard Test Method for Softening Point of Glass

C348-14: Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

C349-14: Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

C357-07(2015): Standard Test Method for Bulk Density of Granular Refractory Materials

C359-13: Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)

C363/C363M-16: Standard Test Method for Node Tensile Strength of Honeycomb Core Materials

C364/C364M-16: Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions

C365/C365M-16: Standard Test Method for Flatwise Compressive Properties of Sandwich Cores

C366/C366M-16: Standard Test Methods for Measurement of Thickness of Sandwich Cores

C368-88(2016): Standard Test Method for Impact Resistance of Ceramic Tableware

C370-12(2016): Standard Test Method for Moisture Expansion of Fired Whiteware Products

C371-09(2014): Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders

C372-94(2016): Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method

C373-17: Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products

C393/C393M-16: Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

C394/C394M-16: Standard Test Method for Shear Fatigue of Sandwich Core Materials

C400-98(2013): Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid

C403/C403M-16: Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

C408-88(2016): Standard Test Method for Thermal Conductivity of Whiteware Ceramics

C413-01(2012): Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C417-05(2015): Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories

C424-93(2016): Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment

C429-16: Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture

C441/C441M-11: Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

C451-13: Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

C454-10(2017): Standard Test Method for Disintegration of Carbon Refractories by Alkali

C456-13: Standard Test Method for Hydration Resistance of Basic Bricks and Shapes

C465-16: Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

C471M-17e1: Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

C480/C480M-16: Standard Test Method for Flexure Creep of Sandwich Constructions

C481-99(2016): Standard Test Method for Laboratory Aging of Sandwich Constructions

C492-92(2017): Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite

C494/C494M-17: Standard Specification for Chemical Admixtures for Concrete

C5-10: Standard Specification for Quicklime for Structural Purposes

C50/C50M-13: Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

C509-06(2015): Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

C51-11: Standard Terminology Relating to Lime and Limestone (as used by the Industry)

C510-16: Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

C515-13: Standard Specification for Chemical-Resistant Ceramic Tower Packings

C531-00(2012): Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C542-05(2017): Standard Specification for Lock-Strip Gaskets

C544-03(2017): Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain

C554-93(2016): Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method

C557-03(2017): Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

C559-16: Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

C560-15e1: Standard Test Methods for Chemical Analysis of Graphite

C561-16: Standard Test Method for Ash in a Graphite Sample

C562-15: Standard Test Method for Moisture in a Graphite Sample

C563-17: Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement

C565-15: Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

C577-07(2014): Standard Test Method for Permeability of Refractories

C579-01(2012): Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C580-02(2012): Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C581-15: Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

C582-09(2016): Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

C583-15: Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures

C584-81(2016): Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products

C586-11: Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)

C593-06(2011): Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

C595/C595M-17: Standard Specification for Blended Hydraulic Cements

C598-93(2013): Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending

C600-85(2015): Standard Test Method of Thermal Shock Test on Glass Pipe

C601-85(2015): Standard Test Method for Pressure Test on Glass Pipe

C603-14: Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

C604-02(2012): Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer

C607-88(2016): Standard Practice for Coking Large Shapes of Carbon-Bearing Materials

C611-98(2016): Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

C613-14: Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction

C621-09(2014): Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass

C623-92(2015): Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance

C625-15: Standard Practice for Reporting Irradiation Results on Graphite

C639-15: Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

C651-15: Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

C657-93(2013): Standard Test Method for D-C Volume Resistivity of Glass

C661-15: Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

C662-16: Standard Specification for Impervious Graphite Pipe and Threading

C674-13: Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials

C675-91(2016): Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers

C676-04(2014): Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware

C679-15: Standard Test Method for Tack-Free Time of Elastomeric Sealants

C681-14: Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

C688-14: Standard Specification for Functional Additions for Use in Hydraulic Cements

C689-09(2014): Standard Test Method for Modulus of Rupture of Unfired Clays

C690-09(2014): Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique

C693-93(2013): Standard Test Method for Density of Glass by Buoyancy

C695-15: Standard Test Method for Compressive Strength of Carbon and Graphite

C704/C704M-15: Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

C708-16: Standard Specification for Nuclear-Grade Beryllium Oxide Powder

C709-09: Standard Terminology Relating to Manufactured Carbon and Graphite

C711-14: Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

C712-14: Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

C714-17: Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

C716-06(2015): Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

C717-17: Standard Terminology of Building Seals and Sealants

C719-14: Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

C722-04(2012): Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

C724-91(2015): Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass

C729-11(2016): Standard Test Method for Density of Glass by the Sink-Float Comparator

C730-98(2013): Standard Test Method for Knoop Indentation Hardness of Glass

C731-15: Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

C732-17: Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

C734-15: Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

C735-04(2014): Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers

C736-12(2017): Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

C737-13: Standard Specification for Limestone for Dusting of Coal Mines

C738-94(2016): Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces

C747-16: Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

C748-98(2015): Standard Test Method for Rockwell Hardness of Graphite Materials

C765-97(2015): Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

C767-93(2013): Standard Test Method for Thermal Conductivity of Carbon Refractories

C769-15: Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus

C770-16: Standard Test Method for Measurement of Glass Stress—Optical Coefficient

C771-14: Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

C772-03(2014): Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

C773-88(2016): Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials

C777-04(2014): Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass

C781-08(2014): Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components

C782-13: Standard Test Method for Softness of Preformed Tape Sealants

C783-85(2015): Standard Practice for Core Sampling of Graphite Electrodes

C792-15: Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

C793-05(2017): Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

C794-15a: Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

C796/C796M-12: Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

C808-75(2016): Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

C813-90(2014): Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

C816-15: Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method

C821-14: Standard Specification for Lime for Use with Pozzolans

C824-91(2015): Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method

C829-81(2015): Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method

C830-00(2016): Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure

C831-98(2017): Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes 

C832-00(2015): Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load

C834-17: Standard Specification for Latex Sealants

C837-09(2014): Standard Test Method for Methylene Blue Index of Clay

C838-16: Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

C845/C845M-12: Standard Specification for Expansive Hydraulic Cement

C848-88(2016): Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance

C849-88(2016): Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares

C860-15: Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test

C862-16: Standard Practice for Preparing Refractory Concrete Specimens by Casting

C863-00(2016): Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures

C864-05(2015): Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

C865-13: Standard Practice for Firing Refractory Concrete Specimens

C866-11(2016): Standard Test Method for Filtration Rate of Ceramic Whiteware Clays

C867-94(2014): Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)

C869/C869M-11(2016): Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

C874-11a: Standard Test Method for Rotary Slag Testing of Refractory Materials

C879-03(2014): Standard Test Methods for Release Papers Used with Preformed Tape Sealants

C881/C881M-15: Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

C882/C882M-13a: Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

C884/C884M-16: Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

C885-87(2012): Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance

C886-98(2015): Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

C898/C898M-09: Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course

C903-15e1: Standard Practice for Preparing Refractory Specimens by Cold Gunning

C907-17: Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

C908-15: Standard Test Method for Yield Strength of Preformed Tape Sealants

C91/C91M-12: Standard Specification for Masonry Cement

C910-16: Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

C911-06(2011): Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

C912-93(2013): Standard Practice for Designing a Process for Cleaning Technical Glasses

C914-09(2015): Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion

C917-05(2011): Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source

C919-12(2017): Standard Practice for Use of Sealants in Acoustical Applications

C92-95(2015): Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials

C920-14a: Standard Specification for Elastomeric Joint Sealants

C925-09(2014): Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders

C927-80(2014): Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels

C949-80(2016): Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration

C957/C957M-17: Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface

C958-92(2014): Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation

C961-15: Standard Test Method for Lap Shear Strength of Sealants

C963-00(2017): Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

C964-07(2012): Standard Guide for Lock-Strip Gasket Glazing

C965-96(2017): Standard Practice for Measuring Viscosity of Glass Above the Softening Point

C972-00(2011): Standard Test Method for Compression-Recovery of Tape Sealant

C973-87(2015): Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing

C974-87(2015): Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting

C975-87(2015): Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing

C977-10: Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

C978-04(2014): Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures

C979/C979M-16: Standard Specification for Pigments for Integrally Colored Concrete

C987-10(2015): Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures

C989/C989M-17: Standard Specification for Slag Cement for Use in Concrete and Mortars

D1002-10: Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

D1003-13: Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

D1004-13: Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

D1005-95(2013): Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers

D1006/D1006M-13: Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood

D1007-11: Standard Specification for sec-Butyl Alcohol

D1014-09: Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

D1042-12(2017): Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

D1043-16: Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

D1044-13: Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

D1045-14: Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

D1047-16: Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable

D1052-09(2014): Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus

D1053-92a(2012): Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics

D1056-14: Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

D1062-08(2015): Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds

D1065-96(2014)e1: Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products

D1076-15: Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex

D1078-11: Standard Test Method for Distillation Range of Volatile Organic Liquids

D1084-16: Standard Test Methods for Viscosity of Adhesives

D1101-97a(2013): Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use

D1119-05(2015): Standard Test Method for Percent Ash Content of Engine Coolants

D1120-17: Standard Test Method for Boiling Point of Engine Coolants

D1121-11: Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts

D1122-16(2017)e1: Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer

D1123-99(2015): Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method

D1133-13: Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents

D1135-86(2014): Standard Test Methods for Chemical Analysis of Blue Pigments

D1144-99(2016): Standard Practice for Determining Strength Development of Adhesive Bonds

D1146-00(2013): Standard Test Method for Blocking Point of Potentially Adhesive Layers

D1148-13: Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

D1149-16: Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment

D115-14: Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation

D1151-00(2013): Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds

D1152-06(2012): Standard Specification for Methanol (Methyl Alcohol)

D1153-12: Standard Specification for Methyl Isobutyl Ketone

D1155-10(2015): Standard Test Method for Roundness of Glass Spheres

D116-86(2016): Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications

D1171-16e1: Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)

D1172-15: Standard Guide for pH of Aqueous Solutions of Soaps and Detergents

D1173-07(2015): Standard Test Method for Foaming Properties of Surface-Active Agents

D1176-14: Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes

D1177-17: Standard Test Method for Freezing Point of Aqueous Engine Coolants

D1183-03(2011): Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions

D1184-98(2012): Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies

D1199-86(2014): Standard Specification for Calcium Carbonate Pigments

D1200-10(2014): Standard Test Method for Viscosity by Ford Viscosity Cup

D1201-13: Standard Specification for Thermosetting Polyester Molding Compounds

D1203-16: Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

D1204-14: Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

D1208-96(2012): Standard Test Methods for Common Properties of Certain Pigments

D1209-05(2011): Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

D1210-05(2014): Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage

D1212-91(2013): Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

D1214-10(2015)e1: Standard Test Method for Sieve Analysis of Glass Spheres

D1229-03(2015): Standard Test Method for Rubber Property—Compression Set at Low Temperatures

D1238-13: Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

D1239-14: Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals

D1240-14: Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products

D1243-15: Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

D1248-16: Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

D1257-07(2012): Standard Specification for High-Gravity Glycerin

D1259-06(2012): Standard Test Methods for Nonvolatile Content of Resin Solutions

D126-87(2012): Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green

D1278-91a(2015): Standard Test Methods for Rubber from Natural Sources—Chemical Analysis

D1280-14: Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners

D1287-11: Standard Test Method for pH of Engine Coolants and Antirusts

D1290-95(2015): Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge

D1296-01(2012): Standard Test Method for Odor of Volatile Solvents and Diluents

D1301-91(2014): Standard Test Methods for Chemical Analysis of White Lead Pigments

D1304-99(2012): Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation

D1308-02(2013): Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes

D1309-93(2015): Standard Test Method for Settling Properties of Traffic Paints During Storage

D1310-14: Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus

D1316-06(2011): Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer

D1329-16: Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)

D1330-04(2015)e1: Standard Specification for Rubber Sheet Gaskets

D1331-14: Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials

D1337-10(2016): Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength

D1338-99(2016): Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength

D1343-95(2011): Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method

D1349-14: Standard Practice for Rubber—Standard Conditions for Testing

D1351-14: Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable

D1353-13: Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

D1363-06(2011): Standard Test Method for Permanganate Time of Acetone and Methanol

D1364-02(2012): Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

D1366-86(2012): Standard Practice for Reporting Particle Size Characteristics of Pigments

D1384-05(2012): Standard Test Method for Corrosion Test for Engine Coolants in Glassware

D1386-15: Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes

D1394-76(2014): Standard Test Methods for Chemical Analysis of White Titanium Pigments

D1401-12e1: Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

D1414-15: Standard Test Methods for Rubber O-Rings

D1415-06(2012): Standard Test Method for Rubber Property—International Hardness

D1417-16: Standard Test Methods for Rubber Latices—Synthetic

D1418-17: Standard Practice for Rubber and Rubber Latices—Nomenclature

D1430-17: Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

D1435-13: Standard Practice for Outdoor Weathering of Plastics

D1436-17: Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes

D1439-15: Standard Test Methods for Sodium Carboxymethylcellulose

D1455-17: Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish

D1456-86(2014): Standard Test Method for Rubber Property—Elongation at Specific Stress

D1460-86(2014): Standard Test Method for Rubber Property—Change in Length During Liquid Immersion

D1474/D1474M-13: Standard Test Methods for Indentation Hardness of Organic Coatings

D1475-13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

D1476-02(2012): Standard Test Method for Heptane Miscibility of Lacquer Solvents

D1483-12(2016): Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method

D1485-07(2015): Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation

D1488-00(2013): Standard Test Method for Amylaceous Matter in Adhesives

D1489-09(2016): Standard Test Method for Nonvolatile Content of Aqueous Adhesives

D1490-01(2013): Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions

D1492-13: Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration

D1494-12: Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

D1499-13: Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

D1505-10: Standard Test Method for Density of Plastics by the Density-Gradient Technique

D1506-15: Standard Test Methods for Carbon Black—Ash Content

D1508-12: Standard Test Method for Carbon Black, Pelleted Fines and Attrition

D1509-15: Standard Test Methods for Carbon Black—Heating Loss

D1510-16a: Standard Test Method for Carbon Black—Iodine Adsorption Number

D1511-12: Standard Test Method for Carbon Black—Pellet Size Distribution

D1512-15b: Standard Test Methods for Carbon Black—pH Value

D1513-05(2012): Standard Test Method for Carbon Black, Pelleted—Pour Density

D1514-15: Standard Test Method for Carbon Black—Sieve Residue

D1519-95(2014): Standard Test Methods for Rubber Chemicals—Determination of Melting Range

D1525-17e1: Standard Test Method for Vicat Softening Temperature of Plastics

D153-84(2014): Standard Test Methods for Specific Gravity of Pigments

D1533-12: Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

D154-85(2009): Standard Guide for Testing Varnishes

D1544-04(2010): Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)

D1545-13: Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method

D1555-16: Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane

D1555M-16: Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]

D1562-15: Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)

D1566-15: Standard Terminology Relating to Rubber

D1568-05(2014): Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates

D1569-05(2014): Standard Test Methods for Detergent Alkylate

D1570-95(2016): Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates

D1579-01(2013): Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives

D1582-98(2017): Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives

D1583-01(2013): Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films

D1585-15: Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products

D1593-13: Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

D1598-15a: Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

D1599-14e1: Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

D16-16: Standard Terminology for Paint, Related Coatings, Materials, and Applications

D1600-14: Standard Terminology for Abbreviated Terms Relating to Plastics

D1601-12: Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers

D1603-14: Standard Test Method for Carbon Black Content in Olefin Plastics

D1613-17: Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

D1614-09: Standard Test Method for Alkalinity in Acetone

D1617-07(2012): Standard Test Method for Ester Value of Solvents and Thinners

D1618-17: Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract

D1619-16a: Standard Test Methods for Carbon Black—Sulfur Content

D1621-16: Standard Test Method for Compressive Properties of Rigid Cellular Plastics

D1623-17: Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

D1630-16: Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)

D1631-10: Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method

D1636-13: Standard Specification for Allyl Molding Compounds

D1644-01(2017): Standard Test Methods for Nonvolatile Content of Varnishes

D1646-15: Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)

D1648-86(2014): Standard Specification for Basic Lead Silicochromate Pigment

D1649-01(2012): Standard Specification for Strontium Chromate Pigment

D1652-11e1: Standard Test Method for Epoxy Content of Epoxy Resins

D1653-13: Standard Test Methods for Water Vapor Transmission of Organic Coating Films

D1654-08(2016)e1: Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

D1667-17: Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)

D1675-03(2011): Standard Test Methods for Polytetrafluoroethylene Tubing

D1681-05(2014): Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure

D1686-10: Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)

D1693-15: Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

D1695-07(2012): Standard Terminology of Cellulose and Cellulose Derivatives

D1696-95(2011): Standard Test Method for Solubility of Cellulose in Sodium Hydroxide

D1708-13: Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

D1709-16ae1: Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

D1710-15: Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

D1712-09(2014): Standard Practice for Resistance of Plastics to Sulfide Staining

D1718-09: Standard Specification for Isobutyl Acetate (95% Grade)

D1719-11: Standard Specification for Isobutyl Alcohol

D1720-03(2012): Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions

D1722-09: Standard Test Method for Water Miscibility of Water-Soluble Solvents

D1725-12: Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method

D1726-11: Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins

D1734-93(2013): Standard Practice for Making Cementitious Panels for Testing Coatings

D1735-14: Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

D1746-15: Standard Test Method for Transparency of Plastic Sheeting

D1751-04(2013)e1: Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

D1752-04a(2013): Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

D1755-15: Standard Specification for Poly(Vinyl Chloride) Resins

D1763-00(2013): Standard Specification for Epoxy Resins

D1765-17: Standard Classification System for Carbon Blacks Used in Rubber Products

D1766-05(2016): Standard Test Method for Rubber Chemicals—Solubility

D1767-89(2017): Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents

D1768-89(2016): Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption

D1779-98(2017): Standard Specification for Adhesive for Acoustical Materials

D1780-05(2012): Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives

D1781-98(2012): Standard Test Method for Climbing Drum Peel for Adhesives

D1782-17: Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials

D1784-11: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D1785-15: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

D1786-16: Standard Specification for Toluene Diisocyanate

D1790-14: Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

D1791-93(2015): Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes

D1792-17: Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes

D1793-17: Standard Test Method for Water Spotting of Emulsion Floor Polishes

D1795-13: Standard Test Method for Intrinsic Viscosity of Cellulose

D1799-03a(2014): Standard Practice for Carbon Black—Sampling Packaged Shipments

D1817-05(2016): Standard Test Method for Rubber Chemicals—Density

D1822-13: Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

D1823-16: Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

D1824-16: Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates

D1828-01(2013): Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures

D1836-07(2013): Standard Specification for Commercial Hexanes

D1844-86(2014): Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate

D1845-86(2014): Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment

D1849-95(2014)e1: Standard Test Method for Package Stability of Paint

D185-07(2012): Standard Test Methods for Coarse Particles in Pigments

D1869-15: Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe

D1871-04(2014): Standard Test Method for Adhesion Between Tire Bead Wire and Rubber

D1874-16: Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases

D1875-03(2013): Standard Test Method for Density of Adhesives in Fluid Form

D1876-08(2015)e1: Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

D1879-06(2014): Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation

D1881-97(2009): Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware

D1882-96(2012): Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles

D1894-14: Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

D1895-17: Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

D1896/D1896M-10(2017): Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds

D1900-06(2015): Standard Practice for Carbon Black—Sampling Bulk Shipments

D1901-10(2015): Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures

D1917-03(2012): Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)

D1921-12: Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

D1922-15: Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

D1926-00(2011): Standard Test Methods for Carboxyl Content of Cellulose

D1929-16: Standard Test Method for Determining Ignition Temperature of Plastics

D1932-13: Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes

D1934-95(2012): Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method

D1937-13: Standard Test Method for Carbon Black, Pelleted—Mass Strength

D1938-14: Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

D1969-07(2012): Standard Specification for 2-Ethylhexanol

D1975-16: Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails

D1977-16: Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis

D1978-91(2014): Standard Guide for Analysis of Electrocoat Bath Samples

D1981-11(2015): Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids

D1982-13: Standard Test Method for Titer of Fatty Acids

D1986-14: Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax

D1991-15: Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay

D1992-17: Standard Guide for Testing Synthetic Plasticizers Used in Rubber

D1993-03(2013)e1: Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption

D1994-07(2015): Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives

D1995-92(2017): Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)

D1998-15: Standard Specification for Polyethylene Upright Storage Tanks

D2000-12(2017): Standard Classification System for Rubber Products in Automotive Applications

D2022-89(2016): Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches

D2023-89(2016): Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents

D2024-09(2017): Standard Test Method for Cloud Point of Nonionic Surfactants

D2047-11: Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

D2048-17: Standard Test Method for Powdering of Floor Polish Films

D2064-91(2016): Standard Test Method for Print Resistance of Architectural Paints

D2066-07(2012): Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

D2067-97(2013): Standard Test Method for Coarse Particles in Printing Ink Dispersions

D2074-07(2013): Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method

D2084-11(2016): Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter

D2086-08(2012): Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde

D2087-06(2012): Standard Test Method for Iron in Formaldehyde Solutions

D209-81(2012): Standard Specification for Lampblack Pigment

D2091-96(2017): Standard Test Method for Print Resistance of Lacquers

D2093-03(2017): Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding

D2094-00(2014): Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests

D2095-96(2015): Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

D210-05(2011): Standard Specification for Bone Black Pigment

D2103-15: Standard Specification for Polyethylene Film and Sheeting

D2105-01(2014): Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

D2106-07(2012): Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents

D2108-10(2015): Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)

D2109-01(2016): Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures

D211-67(2012): Standard Specification for Chrome Yellow and Chrome Orange Pigments

D2110-00(2012): Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures

D2111-10(2015): Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures

D2115-17: Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions

D2116-16: Standard Specification for FEP Resin Molding and Extrusion Materials

D2119-09: Standard Test Method for Aldehydes in Styrene Monomer

D2121-16: Standard Test Methods for Polymer Content of Styrene Monomer

D2122-16: Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

D2124-99(2011): Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique

D2126-15: Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

D2134-93(2012): Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker

D2136-02(2012): Standard Test Method for Coated Fabrics—Low-Temperature Bend Test

D2137-11: Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics

D2143-15: Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

D2152-13: Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

D2180-17: Standard Test Method for Active Oxygen in Bleaching Compounds

D2187-17: Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins

D2190-07(2013): Standard Specification for Vinyl Acetate

D2191-06(2012): Standard Test Method for Acetaldehyde Content of Vinyl Acetate

D2192-06(2012): Standard Test Method for Purity of Aldehydes and Ketones

D2193-06(2012): Standard Test Method for Hydroquinone in Vinyl Acetate

D2194-02(2012): Standard Test Method for Concentration of Formaldehyde Solutions

D2196-15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer

D2197-16: Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion

D2199-03(2013): Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers

D2200-13: Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces

D2201-99(2011): Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products

D2202-00(2014): Standard Test Method for Slump of Sealants

D2203-01(2011): Standard Test Method for Staining from Sealants

D2205-15: Standard Guide for Selection of Tests for Traffic Paints

D2218-67(2012): Standard Specification for Molybdate Orange Pigments

D2219-17: Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation

D2220-17: Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation

D2222-14: Standard Test Method for Methanol Extract of Vinyl Chloride Resins

D2226-93(2012): Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use

D2227-96(2015): Standard Specification for Natural Rubber (NR) Technical Grades

D2228-04(2015): Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method

D2229-10(2014): Standard Test Method for Adhesion Between Steel Tire Cords and Rubber

D2230-96(2012): Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds

D2235-04(2016): Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

D2238-92(2012)e1: Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1

D2239-12a: Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

D2240-15: Standard Test Method for Rubber Property—Durometer Hardness

D2241-15: Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

D2243-95(2014): Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

D2247-15: Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity

D2248-01a(2013): Standard Practice for Detergent Resistance of Organic Finishes

D2251-10(2015): Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

D2281-10(2016): Standard Test Method for Evaluation of Wetting Agents by the Skein Test

D2284-11: Standard Test Method for Acidity of Sulfur Hexafluoride

D2287-12: Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

D2290-16: Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

D2293-96(2016): Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)

D2294-96(2016): Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)

D2295-96(2016): Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)

D2301-10(2017): Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

D2308-07(2013): Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable

D2321-14e1: Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

D233-13: Standard Test Methods of Sampling and Testing Turpentine

D2337-01(2014): Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers

D2338-02(2013): Standard Test Method for Determining Particle Size of Multicolor Lacquers

D2339-98(2017): Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading

D2340-13: Standard Test Method for Peroxides in Styrene Monomer

D2343-09: Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

D2344/D2344M-16: Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

D2349-90(2014): Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints

D2350-90(2015): Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints

D2351-90(2015): Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints

D2352-85(2015): Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints

D2354-10e1: Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles

D2357-11(2016): Standard for Qualitative Classification of Surfactants by Infrared Absorption

D2358-16: Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions

D2359-17: Standard Specification for Refined Benzene-535

D2363-79(2011): Standard Test Methods for Hydroxypropyl Methylcellulose

D2364-15: Standard Test Methods for Hydroxyethylcellulose

D2369-10(2015)e1: Standard Test Method for Volatile Content of Coatings

D2370-16: Standard Test Method for Tensile Properties of Organic Coatings

D2371-85(2010): Standard Test Method for Pigment Content of Solvent-Reducible Paints

D2372-85(2015): Standard Practice for Separation of Vehicle From Solvent-Reducible Paints

D2377-14: Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

D2378-07(2012): Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited

D2379-09: Standard Test Method for Acidity of Formaldehyde Solutions

D2380-04(2011): Standard Test Method for Methanol Content of Formaldehyde Solutions

D2383-14: Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions

D2396-94(2012): Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

D2412-11: Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

D2414-16e1: Standard Test Method for Carbon Black—Oil Absorption Number (OAN)

D2439-16: Standard Specification for Refined Phenol

D2440-13: Standard Test Method for Oxidation Stability of Mineral Insulating Oil

D2442-75(2016): Standard Specification for Alumina Ceramics for Electrical and Electronic Applications

D2444-99(2010): Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

D2448-85(2012): Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment

D2449-88(2015): Standard Specification for Rubber Bales From Natural Sources—Limit on Coating

D2452-15: Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

D2453-15: Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

D2454-14: Standard Practice for Determining the Effect of Overbaking on Organic Coatings

D2457-13: Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

D2463-15: Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

D2464-15: Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

D2466-17: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

D2467-15: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

D2472-15: Standard Specification for Sulfur Hexafluoride

D2485-91(2013): Standard Test Methods for Evaluating Coatings For High Temperature Service

D2486-17: Standard Test Methods for Scrub Resistance of Wall Paints

D2512-17: Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)

D2513-16a: Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

D2517-06(2011): Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

D2519-07(2012): Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

D2527-83(2017): Standard Specification for Rubber Seals—Splice Strength

D2538-02(2010): Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

D2556-14: Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry

D2557-98(2010)e1: Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F)

D2559-12ae1: Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

D256-10e1: Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

D2561-17: Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

D2562-94(2015): Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics

D2563-08(2015): Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts

D2564-12: Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

D2565-16: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

D2570-16: Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants

D2572-97(2010): Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers

D2574-16: Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms

D2578-09: Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

D2581-09: Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

D2582-16: Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

D2583-13a: Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

D2584-11: Standard Test Method for Ignition Loss of Cured Reinforced Resins

D2609-15: Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

D2613-01(2017): Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method

D2621-87(2016): Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints

D2627-08(2012): Standard Specification for Diacetone Alcohol

D2628-91(2016): Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

D263-05(2011): Standard Specification for Chrome Oxide Green Pigment

D2632-15: Standard Test Method for Rubber Property—Resilience by Vertical Rebound

D2633-13a: Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

D2634-07(2013): Standard Specification for Methyl Amyl Acetate (95 % Grade)

D2635-07(2012): Standard Specification for Methyl Isobutyl Carbinol

D2636-07(2012): Standard Specification for Hexylene Glycol

D2647-10: Standard Specification for Crosslinkable Ethylene Plastics

D2651-01(2016): Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding

D2652-11: Standard Terminology Relating to Activated Carbon

D2655-12: Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V

D2656-13: Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V

D2657-07(2015): Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

D2659-16: Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers

D2661-14: Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

D2663-14: Standard Test Methods for Carbon Black—Dispersion in Rubber

D2665-14: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

D267-82(2014): Standard Specification for Gold Bronze Powder

D2672-14: Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

D2673-14: Standard Specification for Oriented Polypropylene Film

D2674-72(2012): Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum

D268-01(2012): Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

D2680-01(2014): Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

D2683-14: Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

D2685-11: Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography

D2686-06(2012): Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape

D2687-95(2016): Standard Practices for Sampling Particulate Ion-Exchange Materials

D269-97(2015): Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives

D2693-07(2012): Standard Specification for Ethylene Glycol

D2694-05(2011): Standard Specification for Diethylene Glycol

D2697-03(2014): Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings

D2698-05(2015): Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging

D2702-05(2016): Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics

D2729-11: Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

D2732-14: Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting

D2734-16: Standard Test Methods for Void Content of Reinforced Plastics

D2737-12a: Standard Specification for Polyethylene (PE) Plastic Tubing

D2739-97(2010): Standard Test Method for Volume Resistivity of Conductive Adhesives

D2745-00(2017): Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements

D2749-13: Standard Symbols for Dimensions of Plastic Pipe Fittings

D2756-07(2012): Standard Test Method for Weight Loss of Electrical Insulating Varnishes

D2758-94(2009): Standard Test Method for Engine Coolants by Engine Dynamometer

D2765-16: Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

D2774-12: Standard Practice for Underground Installation of Thermoplastic Pressure Piping

D279-02(2012): Standard Test Methods for Bleeding of Pigments

D2792-17: Standard Practice for Solvent and Fuel Resistance of Traffic Paint

D2794-93(2010): Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

D280-01(2012): Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments

D2802-14: Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable

D2803-09(2015): Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal

D2804-02(2012): Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography

D2805-11: Standard Test Method for Hiding Power of Paints by Reflectometry

D281-12(2016): Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out

D2825-17: Standard Terminology Relating to Polishes and Related Materials

D2827-13: Standard Specification for Styrene Monomer

D283-13: Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments

D2832-92(2016): Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings

D2834-95(2015): Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes

D2835-89(2017): Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

D2837-13e1: Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

D2838-09e1: Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting

D2839-16: Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

D2842-12: Standard Test Method for Water Absorption of Rigid Cellular Plastics

D2843-16: Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

D2846/D2846M-17a: Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

D2847-15: Standard Practice for Testing Engine Coolants in Car and Light Truck Service

D2851-15: Standard Specification for Liquid Optical Adhesive

D2852-16: Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings

D2854-09(2014): Standard Test Method for Apparent Density of Activated Carbon

D2855-15: Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets

D2857-16: Standard Practice for Dilute Solution Viscosity of Polymers

D2862-16: Standard Test Method for Particle Size Distribution of Granular Activated Carbon

D2863-17: Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

D2866-11: Standard Test Method for Total Ash Content of Activated Carbon

D2867-17: Standard Test Methods for Moisture in Activated Carbon

D2903-11: Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

D2916-09: Standard Specification for Isophorone

D2917-07(2013): Standard Specification for Methyl Isoamyl Ketone

D2918-99(2012): Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel

D2919-01(2014): Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading

D2921-98(2017): Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products

D2924-12(2017): Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D2925-14: Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow

D2929-89(2011): Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence

D2942-02(2013): Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)

D2943-02(2012): Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability

D2949-10: Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

D2959-95(2017): Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants

D2967-07(2017): Standard Test Method for Corner Coverage of Powder Coatings

D297-15: Standard Test Methods for Rubber Products—Chemical Analysis

D2970/D2970M-04(2014): Standard Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments

D2979-16: Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine

D2988-96(2015): Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures

D2989-01(2016): Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures

D2990-17: Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

D2992-12: Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

D2996-17: Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D2997-15: Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D3003-01(2016): Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates

D3004-08(2013): Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials

D3005-17: Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

D3006-10(2017): Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape

D3012-13: Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

D3013-13: Standard Specification for Epoxy Molding Compounds

D3014-11: Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

D3016-97(2010): Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships

D3021-01(2012): Standard Specification for Phthalocyanine Green Pigments

D3022-84(2011): Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill

D3023-98(2017): Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents

D3030-11: Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins

D3034-16: Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

D3035-15: Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

D3039/D3039M-14: Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

D304-11: Standard Specification for n-Butyl Alcohol (Butanol)

D3045-92(2010): Standard Practice for Heat Aging of Plastics Without Load

D305-84(2014): Standard Test Method for Solvent-Extractable Material in Black Pigments

D3052-17: Standard Practice for Rating Water-Emulsion Floor Polishes

D3053-17: Standard Terminology Relating to Carbon Black

D3056-14: Standard Test Method for Gel Time of Solventless Varnishes

D3087-17: Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal

D3111-10: Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method

D3121-17: Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball

D3122-15: Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings

D3123-09(2017): Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

D3124-98(2011): Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

D3125-06(2012): Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid

D3128-07(2013): Standard Specification for 2-Methoxyethanol

D3130-11: Standard Specification for n-Propyl Acetate (96 % Grade)

D3131-07(2013): Standard Specification for Isopropyl Acetate (99 % Grade)

D3137-81(2013): Standard Test Method for Rubber Property—Hydrolytic Stability

D3138-04(2016): Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components

D3139-98(2011): Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

D3144-00(2013)e1: Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation

D3145-13: Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method

D3147-06(2013): Standard Test Method for Testing Stop-Leak Additives for Engine Coolants

D3149-06(2013): Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

D3150-11: Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation

D3153-17: Standard Test Method for Recoatability of Water-Emulsion Floor Polishes

D3156-96(2016): Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)

D3157-05(2015): Standard Test Method for Rubber from Natural Sources—Color

D3159-15: Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials

D3160-16: Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)

D3163-01(2014): Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading

D3164-03(2017): Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading

D3165-07(2014): Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies

D3166-99(2012): Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)

D3167-10: Standard Test Method for Floating Roller Peel Resistance of Adhesives

D3168-85(2016): Standard Practice for Qualitative Identification of Polymers in Emulsion Paints

D3171-15: Standard Test Methods for Constituent Content of Composite Materials

D3182-16: Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

D3183-10(2015): Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products

D3184-11: Standard Practice for Rubber - Evaluation of NR (Natural Rubber)

D3185-06(2016): Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil

D3186-07(2016): Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil

D3187-06(2016): Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)

D3188-06(2010): Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)

D3189-06(2016): Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)

D3190-06(2016): Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR)

D3191-10(2014): Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures

D3192-09(2014): Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)

D3193-17: Standard Specification for Ethylbenzene

D3194-17: Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI)

D3206-17: Standard Test Method for Soil Resistance of Floor Polishes

D3207-17: Standard Test Method for Detergent Resistance of Floor Polish Films

D3209-93(2015): Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes

D3210-95(2016): Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes

D3212-07(2013): Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

D3218-07(2012): Standard Specification for Polyolefin Monofilaments

D3222-05(2015): Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

D3251-04(2013): Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

D3256-86(2014): Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments

D3257-06(2012): Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography

D3258-04(2014): Standard Test Method for Porosity of White or Near White Paint Films by Staining

D3261-16: Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

D3262-16: Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

D3265-17a: Standard Test Method for Carbon Black—Tint Strength

D3271-87(2012): Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis

D3273-16: Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

D3274-09(2013): Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

D3275-08(2013): Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

D3276-15e1: Standard Guide for Painting Inspectors (Metal Substrates)

D3278-96(2011): Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

D3280-85(2014): Standard Test Methods for Analysis of White Zinc Pigments

D329-07(2013): Standard Specification for Acetone

D3291-11(2016)e1: Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression

D3294-15: Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes

D3295-15: Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

D3296-14a: Standard Specification for FEP-Fluorocarbon Tube

D3299-10: Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

D330-07(2013): Standard Specification for 2-Butoxyethanol

D3306-14: Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service

D3307-16: Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials

D3308-12(2017): Standard Specification for PTFE Resin Skived Tape

D331-11: Standard Specification for 2-Ethoxyethanol

D3310-00(2014): Standard Test Method for Determining Corrosivity of Adhesive Materials

D3311-17: Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

D3312-04(2013): Standard Test Method for Percent Reactive Monomer in Solventless Varnishes

D3314-02(2017): Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices

D3316-06(2016): Standard Test Method for Stability of Perchloroethylene with Copper

D332-87(2015): Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation

D3321-13: Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants

D3322-82(2017): Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal

D3329-03(2009): Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography

D333-01(2013): Standard Guide for Clear and Pigmented Lacquers

D3335-85a(2014): Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy

D3346-12: Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)

D3349-17: Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black

D3350-14: Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

D3354-15: Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method

D3359-17: Standard Test Methods for Rating Adhesion by Tape Test

D3361/D3361M-13: Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

D3363-05(2011)e2: Standard Test Method for Film Hardness by Pencil Test

D3364-99(2011): Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

D3367-13: Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force

D3368-17: Standard Specification for FEP Sheet and Film

D3375-16: Standard Test Method for Column Capacity of Particulate Mixed Bed IonExchange Materials

D3377-04(2013): Standard Test Method for Weight Loss of Solventless Varnishes

D3389-16: Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

D34-08(2014): Standard Guide for Chemical Analysis of White Pigments

D3401-97(2012): Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures

D3403-07(2016): Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)

D3410/D3410M-16: Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

D3418-15: Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

D3419-12: Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds

D3420-14: Standard Test Method for Pendulum Impact Resistance of Plastic Film

D3424-11: Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

D3430-95(2016): Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes

D3433-99(2012): Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints

D3434-00(2013): Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

D3437-15: Standard Practice for Sampling and Handling Liquid Cyclic Products

D3438-15: Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride

D344-11(2016): Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts

D3440-13: Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes

D3443-00(2015): Standard Test Method for Chloride in Trichlorotrifluoroethane

D3444-00(2015): Standard Test Method for Total Acid Number of Trichlorotrifluoroethane

D3448-10(2015)e1: Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane

D345-02(2010): Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications

D3450-15: Standard Test Method for Washability Properties of Interior Architectural Coatings

D3451-06(2017): Standard Guide for Testing Coating Powders and Powder Coatings

D3452-06(2017): Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography

D3453-12: Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications

D3455-11: Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin

D3456-86(2012): Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack

D3465-14: Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography

D3466-06(2011): Standard Test Method for Ignition Temperature of Granular Activated Carbon

D3467-04(2014): Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon

D3468/D3468M-99(2013)e1: Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

D3479/D3479M-12: Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials

D3482-07a(2014): Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives

D3484-06(2016): Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)

D3489-17: Standard Test Methods for Microcellular Urethane Materials

D3492-16: Standard Specification for Rubber Contraceptives (Male Condoms)

D3493-16: Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)

D3498-03(2011): Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

D3505-12e1: Standard Test Method for Density or Relative Density of Pure Liquid Chemicals

D3516-89(2011): Standard Test Methods for Ashing Cellulose

D3517-14: Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

D3518/D3518M-13: Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate

D3528-96(2016): Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading

D3530-97(2015): Standard Test Method for Volatiles Content of Composite Material Prepreg

D3531/D3531M-16: Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg

D3532/D3532M-12: Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg

D3535-07a(2013): Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions

D3540-12: Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)

D3542-08(2013): Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

D3543-17: Standard Test Method for Metal Glide Adhesion

D3545-06(2012): Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography

D3546-05(2011): Standard Test Method for Formic Acid in Glacial Acetic Acid

D3548-09: Standard Specification for Ethyl Acrylate

D3552-17: Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites

D3554-07(2013): Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation

D3555-07(2013): Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation

D3564-95(2015): Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring

D3566-03(2014): Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion

D3567-17: Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

D3568-03(2013): Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil

D3574-17: Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

D3575-14: Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

D3576-15: Standard Test Method for Cell Size of Rigid Cellular Plastics

D3577-09(2015): Standard Specification for Rubber Surgical Gloves

D3578-05(2015): Standard Specification for Rubber Examination Gloves

D3579-77(2016): Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type

D3585-08(2013): Standard Specification for ASTM Reference Fluid for Coolant Tests

D3591-97(2011): Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds

D3594-93(2013): Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers

D3595-14: Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

D3596-14: Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins

D3598-89(2016): Standard Test Method for Citrate in Synthetic Detergents

D360-12: Standard Specification for Shellac Varnishes

D3610-00(2015): Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method

D3612-02(2009): Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

D3616-95(2014): Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity

D3618-05(2015): Standard Test Method for Detection of Lead in Paint and Dried Paint Films

D3620-04(2009): Standard Specification for Glacial Acetic Acid

D3622-11: Standard Specification for 1-Propanol (n-Propyl Alcohol)

D3623-78a(2012): Standard Test Method for Testing Antifouling Panels in Shallow Submergence

D3624-85a(2015): Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy

D3632-98(2011): Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method

D3634-99(2015): Standard Test Method for Trace Chloride Ion in Engine Coolants

D3635-13: Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry

D3641-15: Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

D3642-13: Standard Test Method for Softening Point of Certain Alkali-Soluble Resins

D3643-15: Standard Test Method for Acid Number of Certain Alkali-Soluble Resins

D3644-15: Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins

D3647-16: Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition

D365-01(2017): Standard Guide for Soluble Nitrocellulose Base Solutions

D3658-01(2016): Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints

D3663-03(2015): Standard Test Method for Surface Area of Catalysts and Catalyst Carriers

D3667-16: Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

D3673-89(2016): Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates

D3675-17: Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

D3676-13: Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

D3677-10(2015): Standard Test Methods for Rubber—Identification by Infrared Spectrophotometry

D3678-14: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

D3679-17: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

D3681-12e1: Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

D3686-13: Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)

D3687-07(2012): Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method

D3698-04(2015): Standard Practice for Solvent Vapor Degreasing Operations

D3716-14: Standard Test Methods for Use of Emulsion Polymers in Floor Polishes

D3717-85a(2015): Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy

D3718-85a(2015): Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy

D3720-90(2011): Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction

D3721-05(2011): Standard Specification for Synthetic Red Iron Oxide Pigment

D3722-05(2011): Standard Specification for Natural Red and Brown Iron Oxide Pigments

D3723-05(2011): Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing

D3724-01(2012): Standard Specification for Synthetic Brown Iron Oxide Pigment

D3728-08(2012): Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)

D3730-17: Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

D3732-82(2017): Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings

D3734-05(2010): Standard Specification for High-Flash Aromatic Naphthas

D3735-07(2012): Standard Specification for VM&P Naphthas

D3738-16: Standard Specification for Rubber-Coated Cloth Hospital Sheeting

D3741-00(2015)e1: Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents

D3748-14: Standard Practice for Evaluating High-Density Rigid Cellular Plastics

D3749-13: Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique

D3751/D3751M-10(2017): Standard Practice for Evaluation of Furniture Polish

D3753-12e1: Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

D3754-14: Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

D3757-16: Standard Guide for Preparing Specifications for Solvent-based Floor Polishes

D3758-95(2017): Standard Practice for Evaluation of Spray-Buff Products on Test Floors

D3760-13: Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography

D3762-03(2010): Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)

D3763-15: Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

D3766-08(2013): Standard Terminology Relating to Catalysts and Catalysis

D3767-03(2014): Standard Practice for Rubber—Measurement of Dimensions

D3768-16: Standard Test Method for Microcellular Urethanes—Flexural Recovery

D3769-15: Standard Test Method for Microcellular Urethanes—High-Temperature Sag

D3771-15: Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

D3772-15: Standard Specification for Industrial Rubber Finger Cots

D378-10(2016): Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type

D3792-16: Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph

D3794-17: Standard Guide for Testing Coil Coatings

D3795-00a(2012): Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

D380-94(2012): Standard Test Methods for Rubber Hose

D3801-10: Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

D3802-16: Standard Test Method for Ball-Pan Hardness of Activated Carbon

D3803-91(2014): Standard Test Method for Nuclear-Grade Activated Carbon

D3804-02(2014): Standard Test Method for Iron in Paint Driers by EDTA Method

D3806-98(2016): Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)

D3807-98(2012): Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)

D3808-01(2013): Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion

D3826-98(2013): Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

D3832-79(2017): Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems

D3835-16: Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

D3836-13: Standard Practice for Evaluation of Automotive Polish

D3837-95(2012): Standard Practice for Preparing a Solution of Alkali–Soluble Resins

D3838-05(2017): Standard Test Method for pH of Activated Carbon

D3839-14: Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

D3840-14: Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

D3841-16: Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

D3846-08(2015): Standard Test Method for In-Plane Shear Strength of Reinforced Plastics

D3847-01(2012): Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures

D3848-03(2013): Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black

D3849-14a: Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy

D3851-07(2012): Standard Specification for Urethane Microcellular Shoe Soling Materials

D3852-16: Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid

D3853-12(2017): Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding

D3860-98(2014): Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique

D387-00(2017): Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller

D3872-05(2011): Standard Test Method for Ferrous Iron in Iron Oxides

D3876-96(2013): Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography

D3878-16: Standard Terminology for Composite Materials

D3891-08(2014): Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products

D3892-15: Standard Practice for Packaging/Packing of Plastics

D3893-03(2009): Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography

D3895-14: Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

D3896-07(2016): Standard Practice for Rubber From Synthetic Sources—Sampling

D3897-17: Standard Practice for Calculation of Basicity of Chrome Tanning Liquors

D3898-93(2015): Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors

D3900-17: Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

D3902-90(2012): Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas

D3903-15: Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems

D3906-03(2013): Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials

D3907/D3907M-13: Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

D3908-03(2015): Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method

D3911-16: Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

D3912-10(2017): Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants

D3913-03(2015): Standard Test Method for Acidity in Basic Chromium Tanning Liquors

D3914-02(2016): Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

D3916-08(2016): Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

D3917-15a: Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes

D3918-11: Standard Terminology Relating to Reinforced Plastic Pultruded Products

D3924-16: Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials

D3925-02(2015): Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings

D3926-05(2011): Standard Test Methods for Percent Solids in Titanium Dioxide Slurries

D3928-00a(2014): Standard Test Method for Evaluation of Gloss or Sheen Uniformity

D3929-03(2015): Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method

D3930-08(2015): Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes

D3931-08(2015): Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading

D3934-14: Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus

D3935-15: Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material

D3941-14: Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus

D3942-03(2013): Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite

D3943-10(2015): Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts

D395-16e1: Standard Test Methods for Rubber Property—Compression Set

D3954-15: Standard Test Method for Dropping Point of Waxes

D3955-13: Standard Specification for Electrical Insulating Varnishes

D3958-06(2016): Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)

D3960-05(2013): Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings

D3964-10(2015): Standard Practice for Selection of Coating Specimens for Appearance Measurements

D3965-16: Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

D3969-01(2012): Standard Test Method for Zirconium in Paint Driers by EDTA Method

D3970-05(2017): Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination

D3971-89(2010): Standard Test Method for Dichloromethane-Soluble Matter in Cellulose

D3981-09a(2016): Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications

D3982-08(2014): Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts

D3983-98(2011): Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

D3988-05(2017): Standard Test Method for Vanadium in Paint Driers by EDTA Method

D3989-01(2012): Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method

D4000-16: Standard Classification System for Specifying Plastic Materials

D4001-13: Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering

D4002-81(2016): Standard Practice for Evaluation of Buffable Shoe Polish

D4004-06(2017): Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis

D4005-92(2015): Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings

D4008-16: Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents

D4009-92(2011): Standard Guide for Foam Stability of Hand Dishwashing Detergents

D4017-02(2015): Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method

D4018-17: Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows

D4020-11: Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

D4024-15: Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

D4026-06(2017): Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene

D4027-98(2011): Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test

D4040-10: Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer

D4058-96(2015): Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

D4059-00(2010): Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

D4060-14: Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

D4061-13: Standard Test Method for Retroreflectance of Horizontal Coatings

D4062-11(2016): Standard Test Method for Leveling of Paints by Draw-Down Method

D4065-12: Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

D4066-13: Standard Classification System for Nylon Injection and Extrusion Materials (PA)

D4067-16: Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

D4068-17: Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

D4069-95(2014): Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams

D4070-15: Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

D4075-06(2017): Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals

D4077-17: Standard Specification for Cumene (Isopropylbenzene)

D4078-02(2015): Standard Specification for Water Emulsion Floor Polish

D4079-00(2016): Standard Specification for Vapor-Degreasing Grade Methylene Chloride

D4080-15: Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade

D4081-16: Standard Specification for Drycleaning-Grade Perchloroethylene

D4082-10(2017): Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants

D4085-93(2013): Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry

D4092-07(2013): Standard Terminology for Plastics: Dynamic Mechanical Properties

D4093-95(2014): Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

D4095-97(2014): Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes

D4097-01(2010): Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

D4101-14e2: Standard Specification for Polypropylene Injection and Extrusion Materials

D4102-82(2015): Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers

D4103-17: Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing

D412-16: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

D4122-17e1: Standard Practice for Carbon Black—Evaluation of an Industry Reference Black

D4126-02(2012): Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane

D413-98(2013): Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate

D4131-84(2014): Standard Practice for Sampling Fish with Rotenone

D4138-07a(2013): Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

D4139-04(2014): Standard Guide for Determining Volatile and Nonvolatile Content of Pigments

D4140-07(2013): Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents

D4142-89(2017): Standard Guide for Testing Epoxy Resins

D4143-16: Standard Guide for Testing Latex Vehicles

D4144-94(2014): Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing

D4145-10: Standard Test Method for Coating Flexibility of Prepainted Sheet

D4146-10: Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel

D4147-99(2013): Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar

D4161-14: Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

D4164-13: Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers

D4167-15: Standard Specification for Fiber-Reinforced Plastic Fans and Blowers

D4171-16a: Standard Specification for Fuel System Icing Inhibitors

D4179-11(2017): Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers

D4180-13: Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers

D4185-17: Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry

D4203-17: Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

D4204-16: Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study

D4206-96(2013): Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus

D4209-07(2013): Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes

D4212-16: Standard Test Method for Viscosity by Dip-Type Viscosity Cups

D4213-08(2016): Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss

D4214-07(2015): Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films

D4216-13: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

D4217-07(2017): Standard Test Method for Gel Time of Thermosetting Coating Powder

D4218-15: Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

D4222-03(2015)e1: Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements

D4226-16: Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

D4228-05(2017): Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

D4236-94(2016): Standard Practice for Labeling Art Materials for Chronic Health Hazards

D4242-07(2017): Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders

D4245-08(2013): Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation

D4246-14: Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation

D4251-89(2016): Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration

D4252-89(2017): Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates

D4255/D4255M-15a: Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

D4266-17: Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins

D4273-11: Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols

D4274-16: Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

D4275-17: Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography

D4276-02(2012): Standard Practice for Confined Area Entry

D4283-98(2015): Standard Test Method for Viscosity of Silicone Fluids

D4284-12(2017)e1: Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry

D4287-00(2014): Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer

D4288-02(2012): Standard Specification for Calcium Borosilicate Pigments

D429-14: Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

D4295-89(2017): Standard Classification for Rubber Compounding Materials—Zinc Oxide

D4297-15: Standard Practice for Sampling and Handling Bisphenol A(4,4 -Isopropylidinediphenol)

D430-06(2012): Standard Test Methods for Rubber Deterioration—Dynamic Fatigue

D4300-01(2013): Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi

D4301-05(2013): Standard Test Method for Total Chlorine in Epoxy Resins and Compounds

D4302-14: Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints

D4303-10(2016): Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials

D4313-12: Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable

D4315-94(2017): Standard Test Methods for Rubber Compounding Material—Zinc Oxide

D4316-95(2016): Standard Specification for Elastomeric Water Bottles

D4317-16: Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives

D4321-15: Standard Test Method for Package Yield of Plastic Film

D4325-13: Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

D4329-13: Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

D4330-94(2017): Standard Practice for Evaluation of Fiberglass Boat Polish and Wax

D4337-89(2017): Standard Test Methods for Analysis of Linear Detergent Alkylates

D4338-97(2016): Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend

D4339-01(2013): Standard Test Method for Determination of the Odor of Adhesives

D4349-16: Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

D4350-16: Standard Test Method for Corrosivity Index of Plastics and Fillers

D4359-90(2012): Standard Test Method for Determining Whether a Material Is a Liquid or a Solid

D4360-11: Standard Specification for Methyl n-Amyl Ketone

D4361-10: Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter

D4363-17: Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable

D4364-13: Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight

D4365-13: Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

D4367-02(2012): Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography

D4370-01(2012): Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath

D4376-15: Standard Specification for Vapor-Degreasing Grade Perchloroethylene

D4385-13: Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

D4386-95(2016): Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring

D4388-13: Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

D4396-15: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications

D4397-16: Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

D4399-05(2017): Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths

D4400-99(2012)e1: Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator

D4414-95(2013): Standard Practice for Measurement of Wet Film Thickness by Notch Gages

D4416-09: Standard Specification for Acrylic Acid

D4417-14: Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

D4426-01(2013): Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating

D4434/D4434M-15: Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

D4438-13: Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting

D444-88(2014): Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)

D4440-15: Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

D4441-15: Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene

D4443-13: Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

D4445-10(2015): Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)

D4446/D4446M-13: Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments

D4450-85(2012): Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment

D4451-02(2014): Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing

D4456-17: Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins

D4457-02(2014): Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph

D4459-12: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

D4462-02(2012): Standard Specification for Zinc Hydroxy Phosphite Pigment

D4463/D4463M-96(2013)e1: Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts

D4464-15: Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering

D4471-10: Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration

D4473-08(2016): Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior

D4475-02(2016): Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

D4477-16: Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

D4481-10(2015): Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts

D4482-11: Test Method for Rubber Property - Extension Cycling Fatigue

D4483-14a: Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

D4487-90(2014): Standard Test Methods for Analysis of Calcium Borosilicate

D4490-96(2016): Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes

D4492-10: Standard Test Method for Analysis of Benzene by Gas Chromatography

D4493-16: Standard Test Method for Solidification Point of Bisphenol A(4,4-Isopropylidenediphenol)

D4494-95(2015): Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene

D4495-16: Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

D4497-10: Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)

D4498-07(2015): Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives

D4499-07(2015): Standard Test Method for Heat Stability of Hot-Melt Adhesives

D4501-01(2014): Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

D4502-92(2011): Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints

D4512-03(2013)e1: Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder

D4513-11(2017): Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving

D4526-12: Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography

D4527-99(2016): Standard Test Method for Carbon Black—Solvent Extractables

D4528-88(2017): Standard Classification for Rubber Compounding Materials—Sulfur

D454-04(2015): Standard Test Method for Rubber Deterioration by Heat and Air Pressure

D4541-17: Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

D4548-11: Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins

D4549-15: Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

D4551-12: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

D4559-99(2010): Standard Test Method for Volatile Matter in Silicone Fluid

D4562-01(2013): Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen

D4563-02(2015): Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint

D4567-03(2013): Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

D4568-13: Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials

D4569-06(2017): Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur

D4570-02(2017): Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)

D4571-06(2017): Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material

D4572-89(2017): Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur

D4573-03(2014): Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur

D4574-06(2017): Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content

D4575-09(2015): Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers

D4578-06(2017): Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction

D4579-00(2012): Standard Practice for Handling an Acid Degreaser or Still

D4583-95(2015): Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data

D4584-05(2015): Standard Test Method for Measuring Apparent pH of Electrocoat Baths

D4585/D4585M-13: Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

D4587-11: Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

D459-16: Standard Terminology Relating to Soaps and Other Detergents

D4590-13: Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry

D4591-07(2012): Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

D4599-14: Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters

D460-91(2014): Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products

D4600-95(2016): Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres

D4603-03(2011)e1: Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

D4607-14: Standard Test Method for Determination of Iodine Number of Activated Carbon

D4608-89(2017): Standard Test Method for Citrate in Detergents

D4610-98(2013): Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings

D4614-11: Standard Specification for Ethyl Acetate (All Grades)

D4615-12: Standard Specification for n-Butyl Acetate (All Grades)

D4620-02(2017): Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber

D4634-16: Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

D4635-16: Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications

D4637/D4637M-15: Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

D464-15: Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products

D4640-86(2017): Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins

D4641-17: Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms

D4642-04(2016): Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry

D465-15: Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products

D4652-05(2012): Standard Specification for Silicone Fluid Used for Electrical Insulation

D4659-14: Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates

D4660-12: Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate

D4661-13: Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates

D4662-15: Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

D4663-15: Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates

D4669-07(2013)e1: Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

D4670-17: Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols

D4671-16: Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols

D4672-12: Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

D4673-16: Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

D4674-02a(2010): Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

D4676-94(2017): Standard Classification for Rubber Compounding Materials—Antidegradants

D4677-87(2013): Standard Classification for Rubber Compounding Materials—Titanium Dioxide

D4678-15a: Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials

D4679-02(2015)e1: Standard Specification for Rubber General Purpose, Household or Beautician Gloves

D4680-98(2017): Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)

D4689-12: Standard Specification for Adhesive, Casein-Type

D4690-12: Standard Specification for Urea-Formaldehyde Resin Adhesives

D4699-03(2013): Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

D4701-00(2015): Standard Specification for Technical Grade Methylene Chloride

D4703-16: Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

D4707-09(2017): Standard Test Method for Measuring Paint Spatter Resistance During Roller Application

D4708-12: Standard Practice for Preparation of Uniform Free Films of Organic Coatings

D4709-07(2012): Standard Specification for Methyl Acrylate

D471-16a: Standard Test Method for Rubber Property—Effect of Liquids

D4710-07(2012): Standard Specification for Acetaldehyde

D4711-89(2017): Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids

D4713-12: Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems

D4725-15: Standard Terminology for Engine Coolants and Related Fluids

D4726-15: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

D4733-13: Standard Test Methods for Solventless Electrical Insulating Varnishes

D4734-17: Standard Specification for Refined Benzene-545

D4735-15: Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

D4745-14: Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods

D4747-02(2014): Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography

D4752-10(2015): Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

D4754-11: Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell

D4755-95(2015)e1: Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures

D4756-15: Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

D476-15: Standard Classification for Dry Pigmentary Titanium Dioxide Products

D4762-16: Standard Guide for Testing Polymer Matrix Composite Materials

D4764-01(2016): Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint

D4765-13: Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes

D4766-98(2014): Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)

D4768-11: Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography

D4773-02(2012): Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate

D4776/D4776M-10: Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure

D478-02(2012): Standard Specification for Zinc Yellow (Zinc Chromate) Pigments

D4780-12(2017)e1: Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption

D4781-03(2013): Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles

D4782-10(2016): Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry

D4783-01(2013): Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi

D4787-13: Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

D4789-12: Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol)

D4790-14: Standard Terminology of Aromatic Hydrocarbons and Related Chemicals

D4794-94(2009): Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography

D4796-17: Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials

D4797-12a: Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking

D480-88(2014): Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes

D4800-94(2015): Standard Guide for Classifying and Specifying Adhesives

D4801-08(2016): Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater

D4802-16: Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

D4803-10: Standard Test Method for Predicting Heat Buildup in PVC Building Products

D4804-14: Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

D4811/D4811M-16: Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

D4812-11: Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

D4817-88(2017): Standard Classification for Rubber Compounding Materials—Stearic Acid

D4818-89(2017): Standard Classification for Rubber Compounding Materials—Vulcanization Accelerators

D4819-13: Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

D4821-16: Standard Guide for Carbon Black—Validation of Test Method Precision and Bias

D4824-13: Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption

D4827-03(2015): Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography

D4828-94(2016): Standard Test Methods for Practical Washability of Organic Coatings

D4834-03(2014): Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy

D4835-08(2012): Standard Specification for Propylene Glycol Monomethyl Ether Acetate

D4836-09: Standard Specification for Dipropylene Glycol Monomethyl Ether

D4837-07(2012): Standard Specification for Propylene Glycol Monomethyl Ether

D4838-88(2016): Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints

D4856-11(2016): Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)

D4861-11: Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air

D4875-11: Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols

D4877-14: Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates

D4878-15: Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols

D4880-14: Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire

D4881-05(2017): Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire

D4882-05(2012): Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test

D4889-15: Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

D4890-13: Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

D4894-15: Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

D4895-16: Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

D4896-01(2016): Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results

D49-83(2014): Standard Test Methods of Chemical Analysis of Red Lead

D4913-00(2016): Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors

D4921-95(2012): Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature

D4924-89(2017): Standard Classification for Petroleum Waxes for Use in Rubber Compounding

D4926-15: Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction

D4934-02(2017): Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles

D4936-10(2015): Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration

D4937-96(2017): Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

D4938-89(2013): Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water

D4939-89(2013): Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater

D494-11: Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

D4940-15e1: Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives

D4941-06(2016): Standard Practice for Preparing Drawdowns of Artists’ Paste Paints

D4942-11: Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer

D4946-89(2017): Standard Test Method for Blocking Resistance of Architectural Paints

D4948-89(2016): Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid

D4954-89(2017): Standard Test Method for Determination of Nitrilotriacetates in Detergents

D4955-89(2016): Standard Practice for Field Evaluation of Automotive Polish

D4958-10(2016): Standard Test Method for Comparison of the Brush Drag of Latex Paints

D4960-08(2013): Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials

D4963/D4963M-11: Standard Test Method for Ignition Loss of Glass Strands and Fabrics

D4968-17: Standard Practice for Annual Review of Test Methods and Specifications for Plastics

D4969-17: Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

D4976-12a: Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

D4985-10(2015): Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)

D4986-10: Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

D4995-10(2015): Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent

D50-90(2011): Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese

D5007-99(2017): Standard Test Method for Wet-to-Dry Hiding Change

D5008-07(2012): Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

D5009-02(2017): Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions

D501-03(2016): Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents

D5017-17: Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

D502-89(2016): Standard Test Method for Particle Size of Soaps and Other Detergents

D5023-15: Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

D5024-15: Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression

D5025-12e1: Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

D5026-15: Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension

D5028-17: Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

D5029-98(2014): Standard Test Method for Water Solubles in Activated Carbon

D5031/D5031M-13: Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings

D5040-90(2016): Standard Test Methods for Ash Content of Adhesives

D5041-98(2012): Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints

D5042-90(2009): Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins

D5043-04(2009): Standard Practice for Field Identification of Coatings

D5044-06(2017): Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)

D5045-14: Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

D5047-17: Standard Specification for Polyethylene Terephthalate Film and Sheeting

D5048-14: Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

D5051-06(2017): Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay

D5054-90(2014): Standard Test Method for Rubber Chemicals—Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay

D5060-12: Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography

D5062-09(2017): Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination

D5063-90(2012): Standard Guide for Use of Certification of Coating Conformance Form

D5064-16a: Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

D5065-13: Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

D5067-16: Standard Specification for Artists' Watercolor Paints

D5068-04(2013): Standard Practice for Preparation of Paint Brushes for Evaluation

D5069/D5069M-13: Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings

D5070-90(2014): Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations

D5071-06(2013): Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

D5075-01(2017)e1: Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air

D5083-17: Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

D5087-02(2014): Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

D509-15: Standard Test Methods of Sampling and Grading Rosin

D5095-91(2013): Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

D5098-16: Standard Specification for Artists' Acrylic Dispersion Paints

D5099-08(2013): Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry

D5113-97(2016): Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam

D5116-10: Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products

D5117-09: Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

D5125-10(2014): Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

D5132-17: Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

D5135-16e1: Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography

D5136-17a: Standard Specification for High Purity p-Xylene

D5137-07(2013): Standard Specification for Hexyl Acetate

D5138-16: Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

D5139-12: Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants

D5145-09(2014): Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths

D5146-10: Standard Guide to Testing Solvent-Borne Architectural Coatings

D5150-92(2017): Standard Test Method for Hiding Power of Architectural Paints Applied by Roller

D5151-06(2015): Standard Test Method for Detection of Holes in Medical Gloves

D5153-10(2016): Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption

D5154-10: Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

D5155-14e1: Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates

D5158-98(2013): Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving

D5159-04(2014): Standard Guide for Dusting Attrition of Granular Activated Carbon

D5160-95(2014): Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon

D5162-15: Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

D5164-05(2011): Standard Specification for Propylene Glycol and Dipropylene Glycol

D5165-12: Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle

D5166-97(2016): Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven

D5167-13: Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

D517-98(2015): Standard Specification for Asphalt Plank

D5178-16: Standard Test Method for Mar Resistance of Organic Coatings

D5179-16: Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method

D5181-09: Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester

D5194-13: Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

D5197-16: Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)

D520-00(2011): Standard Specification for Zinc Dust Pigment

D5200-03(2014): Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans

D5201-05a(2014): Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings

D5204-13: Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials

D5205-16: Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials

D5206-13: Standard Test Method for Windload Resistance of Rigid Plastic Siding

D5207-14: Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials

D5208-14: Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

D521-02(2012): Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)

D5211-17: Standard Specification for Xylenes for p-Xylene Feedstock

D5215-93(2012): Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

D5217-91(2009): Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials

D522/D522M-17: Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

D5224-12: Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

D5225-14: Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

D5226-16: Standard Practice for Dissolving Polymer Materials

D5227-13: Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

D5228-16: Standard Test Method for Determination of Butane Working Capacity of Activated Carbon

D5229/D5229M-14: Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials

D5230-14e1: Standard Test Method for Carbon Black—Automated Individual Pellet Hardness

D5237-14: Standard Guide for Evaluating Fabric Softeners

D5248-04(2015): Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane

D5249-10(2016): Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

D5250-06(2015): Standard Specification for Poly(vinyl chloride) Gloves for Medical Application

D5260-16: Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D5266-13: Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

D5267-97(2012): Standard Test Method for Determination of Extrudability of Cartridge Adhesives

D5272-08(2013): Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics

D5279-13: Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion

D5282-05(2012): Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation

D5286-01(2017): Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints

D5289-12: Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters

D5296-11: Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

D5297-95(2014): Standard Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography

D5301-92(2016): Standard Practice for Physical Characterization of Paint Brushes

D5309-17: Standard Specification for Cyclohexane 999

D531-15: Standard Test Method for Rubber Property—Pusey and Jones Indentation

D5310-10(2014): Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography

D5319-17: Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

D5324-16: Standard Guide for Testing Water-Borne Architectural Coatings

D5325-03(2014): Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints

D5326-94a(2013): Standard Test Method for Color Development in Tinted Latex Paints

D5327-97(2013): Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions

D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements

D5336-15a: Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material

D5338-15: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures

D5343-06(2012)e1: Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners

D5346-17: Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds

D5347-95(2012): Standard Test Method for Determination of the Ash Content of Fats and Oils

D5348-95(2012): Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene

D5349-95(2012): Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method

D5350-95(2012): Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A

D5351-93(2017): Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B

D5352-95(2012): Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C

D5353-95(2012): Standard Test Method for Determination of Total Desulfated Fatty Matter

D5354-95(2012): Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils

D5355-95(2017): Standard Test Method for Specific Gravity of Oils and Liquid Fats

D5356-17a: Standard Test Method for pH of Chrome Tanning Solutions

D5357-03(2013): Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction

D5363-16: Standard Specification for Anaerobic Single-Component Adhesives (AN)

D5365-12: Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D5367-16: Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

D5376-06(2017): Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ

D5377-93(2017): Standard Classification for Rubber Compounding Materials—Ground Coal

D5379/D5379M-12: Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

D5380-93(2014): Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis

D5381-93(2014): Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders

D5382-02(2017): Standard Guide to Evaluation of Optical Properties of Powder Coatings

D5383-16: Standard Practice for Visual Determination of the Lightfastness of Art Materials by Artists and Art Technologists

D5386-16: Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

D5394-02(2012): Standard Specification for Reclaimed 1,1,1-Trichloroethane

D5395-03(2013): Standard Specification for Reclaimed Methylene Chloride

D5396-04(2015): Standard Specification for Reclaimed Perchloroethylene

D5398-97(2010): Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

D5399-09: Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

D5400-15: Standard Test Methods for Hydroxypropylcellulose

D5401-03(2014): Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood

D5402-15: Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

D5403-93(2013): Standard Test Methods for Volatile Content of Radiation Curable Materials

D5405/D5405M-98(2015): Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

D5406-93(2016): Standard Practice for Rubber—Calculation of Producer's Process Performance Indexes

D5418-15: Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)

D5419-14a: Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

D542-14: Standard Test Method for Index of Refraction of Transparent Organic Plastics

D5420-16: Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

D5421-15: Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

D5422-09: Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

D543-14: Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

D5436-15: Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

D5439-95(2012): Standard Test Method for Determination of Sediment in Moellon

D5440-17: Standard Test Method for Determining the Melting Point of Fats and Oils

D5448/D5448M-16: Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

D5449/D5449M-16: Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

D545-14: Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

D5450/D5450M-16: Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

D5460-02(2017): Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives

D5461-06(2017): Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials

D5466-15: Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology)

D5467/D5467M-97(2017): Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam

D5471-17: Standard Specification for O-Xylene 980

D5477-11: Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

D5478-13: Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer

D5479-94(2013): Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed

D5491-08(2014): Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials

D5492-17: Standard Test Method for Determination of Xylene Solubles in Propylene Plastics

D5507-99(2012): Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography

D5508-16: Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

D5511-12: Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

D5517-14: Standard Test Method for Determining Extractability of Metals from Art Materials

D5523-15: Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates

D5526-12: Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

D5528-13: Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

D5531-17: Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings

D5538-13: Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations

D5547-95(2017): Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption

D5551-95(2012): Standard Test Method for Determination of the Cloud Point of Oil

D5553-95(2012): Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils

D5554-15: Standard Test Method for Determination of the Iodine Value of Fats and Oils

D5555-95(2017): Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds

D5556-95(2011): Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds

D5557-95(2017): Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds

D5558-95(2017): Standard Test Method for Determination of the Saponification Value of Fats and Oils

D5559-95(2017): Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils

D5560-95(2011): Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils

D5562-95(2011): Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps

D5564-95(2011): Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils

D5565-95(2011): Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils

D5566-95(2011): Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils

D5572-95(2012): Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

D5573-99(2012): Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints

D5574-94(2012): Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints

D5575-07(2013): Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

D5576-00(2013): Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

D5578-04(2015): Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)

D5588-97(2017): Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas

D5589-09(2013): Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement

D5590-00(2010)e1: Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay

D5592-94(2010): Standard Guide for Material Properties Needed in Engineering Design Using Plastics

D5594-98(2012): Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)

D5603-01(2015): Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

D5604-96(2017): Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption

D5605-94(2016): Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values

D5606-17: Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock

D561-82(2014): Standard Specification for Carbon Black Pigment for Paint

D5616-04(2016): Standard Specification for Reclaimed Trichloroethylene

D5618-94(2011): Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear

D562-10(2014): Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer

D5627-94(2009)e1: Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins

D5628-10: Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

D5629-16: Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers

D5630-13: Standard Test Method for Ash Content in Plastics

D5631-15: Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF3Br)

D5632/D5632M-17: Standard Specification for Halon 1301, Bromotrifluoromethane (CF3Br)

D5637-05(2017): Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes

D5638-14: Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

D564-87(2017): Standard Test Methods for Liquid Paint Driers

D5644-01(2013): Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

D5648-01(2014): Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)

D5649-15: Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners

D5656-10: Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading

D5657-07(2014): Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners

D5662-17: Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

D5666-95(2014): Standard Test Method for Rubber Chemical Antidegradants—Purity of p -Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography

D5667-95(2015): Standard Test Method for Rubber From Synthetic Sources—Total and Water Soluble Ash

D5668-09(2014): Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter

D5670-95(2014): Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry

D5675-13: Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders

D5677-17: Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

D5678-17: Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

D5682-08(2012): Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials

D5685-11: Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

D5687/D5687M-95(2015): Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation

D570-98(2010)e1: Standard Test Method for Water Absorption of Plastics

D5702-07(2012): Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

D5712-15: Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method

D5713-14: Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography

D572-04(2015): Standard Test Method for Rubber—Deterioration by Heat and Oxygen

D5721-08(2013): Standard Practice for Air-Oven Aging of Polyolefin Geomembranes

D5723-95(2015): Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence

D5724-16: Standard Specification for Gouache Paints

D573-04(2015): Standard Test Method for Rubber—Deterioration in an Air Oven

D5742-16: Standard Test Method for Determination of Butane Activity of Activated Carbon

D575-91(2012): Standard Test Methods for Rubber Properties in Compression

D5751-99(2012): Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

D5752-10(2017): Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines

D5757-11(2017): Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets

D5758-01(2015): Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction

D5766/D5766M-11: Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

D5768-02(2014): Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

D5774-95(2014): Standard Test Methods for Rubber—Chemical Analysis of Extractables

D5775-95(2014): Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index

D5776-14a: Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

D5794-95(2014): Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography

D5796-10(2015): Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device

D5805-00(2014): Standard Test Methods for Rubber—Determination of Carbon Black in Masterbatches

D5806-95(2017): Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration

D5808-09a(2014): Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

D5813-04(2012): Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

D5814-10: Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test

D5817-03a(2014): Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing

D5824-98(2017): Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

D5827-09(2015): Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography

D5828-97(2011)e1: Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates

D5832-98(2014): Standard Test Method for Volatile Matter Content of Activated Carbon Samples

D5836-08(2013): Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)

D5837-15: Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)

D5857-17: Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

D5860-95(2013): Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens

D5861-07(2017): Standard Guide for Significance of Particle Size Measurements of Coating Powders

D5868-01(2014): Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding

D5870-16: Standard Practice for Calculating Property Retention Index of Plastics

D5871-17: Standard Specification for Benzene for Cyclohexane Feedstock

D5893/D5893M-16: Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

D5894-16: Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

D5895-13: Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders

D5896-96(2012): Standard Test Method for Carbohydrate Distribution of Cellulosic Materials

D5897-13: Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method

D5899-98(2013): Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems

D5900-17: Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

D5902-05(2015): Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value

D5909-96a(2011): Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance

D5910-05(2012): Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

D5913-96(2013): Standard Test Method for Evaluation of Cleanability of Paint Brushes

D5917-15e1: Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

D5919-96(2017): Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations

D5926-15: Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

D5927-17: Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

D5930-17: Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

D5931-13: Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter

D5932-08(2013)e1: Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace

D5946-17: Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements

D5947-11: Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

D5948-05(2012): Standard Specification for Molding Compounds, Thermosetting

D5958-99(2012)e1: Standard Practices for Preparation of Oil-Based Ink Resin Solutions

D5959-12(2017): Standard Test Method for Bulk Density of Level Paintbrush Filaments

D5960-03(2013): Standard Specification for Technical Grade Ethylene Dichloride

D5961/D5961M-17: Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

D5963-04(2015): Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)

D5964-16: Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil

D5965-02(2013): Standard Test Methods for Specific Gravity of Coating Powders

D5973-97(2017): Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

D5974-15: Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography

D5988-12: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil

D5989-14a: Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

D5991-15: Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake

D5992-96(2011): Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

D5998-16: Standard Specification for Molded Polyethylene Shipping and Storage Drums

D600-07(2012): Standard Specification for Liquid Paint Driers

D6004-04(2011): Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

D6019-15: Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)

D602-81(2012): Standard Specification for Barium Sulfate Pigments

D6037-13e1: Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

D6038-14: Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)

D6040-12: Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

D6041-11: Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

D6042-09(2016): Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

D6047-17: Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers

D6048-07(2012): Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers

D6049-03(2013): Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates

D605-82(2012): Standard Specification for Magnesium Silicate Pigment (Talc)

D6053-14: Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

D6056-96(2011): Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

D6057-96(2011): Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy

D6058-96(2016): Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment

D6059-96(2011): Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

D6064-11(2015): Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)

D6065-11(2015): Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)

D6068-10: Standard Test Method for Determining J-R Curves of Plastic Materials

D607-82(2012): Standard Specification for Wet Ground Mica Pigments

D6073-08a(2013): Standard Test Method for Relative Setting of Heatset Printing Inks

D608-05(2011): Standard Specification for Dibutyl Phthalate

D6085-97(2016): Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts

D609-17: Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

D6090-12: Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)

D6093-97(2016): Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer

D6096-11(2016): Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation

D6098-16: Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

D6099-13: Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

D610-08(2012): Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

D6100-14: Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)

D6105-04(2012): Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding

D6107-97(2017): Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service

D6108-13: Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

D6109-13: Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

D6110-10: Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

D6111-13a: Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement

D6112-13: Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

D6115-97(2011): Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

D6117-16: Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

D6124-06(2017): Standard Test Method for Residual Powder on Medical Gloves

D6126/D6126M-11(2015): Standard Specification for HFC-23 (Trifluoromethane, CHF3)

D6127-11(2015): Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)

D6129-97(2015): Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy

D6130-11: Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

D6131-97(2012): Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments

D6132-13(2017): Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage

D6133-02(2014): Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph

D6134-07(2013): Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems

D6142-16: Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography

D6143-13: Standard Test Method for Iron Content of Bisphenol A (4,4 - Isopropylidenediphenol)

D6144-17: Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography

D6147-97(2014): Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression

D6150-16: Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

D6166-12(2016): Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)

D6173-97(2014): Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration

D6175-03(2013): Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles

D618-13: Standard Practice for Conditioning Plastics for Testing

D6188-17: Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall

D6189-97(2014): Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

D6191-97(2014): Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings

D6195-03(2011): Standard Test Methods for Loop Tack

D6196-15: Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air

D6204-15: Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers

D6205-12: Standard Practice for Calibration of the James Static Coefficient of Friction Machine

D6206-09(2015): Standard Practice for Sampling of Coating Films

D6210-10: Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines

D622-99(2012): Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System

D6226-15: Standard Test Method for Open Cell Content of Rigid Cellular Plastics

D6229-06(2010): Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

D623-07(2014): Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression

D6231-11(2015): Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)

D6237-09(2015): Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

D624-00(2012): Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

D6245-12: Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

D6247-10: Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

D6248-98(2012)e1: Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

D6261-14: Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

D6262-12: Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

D6263-15: Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

D6264/D6264M-17: Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force

D6265-15: Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test

D6266-00a(2017): Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

D6267/D6267M-13: Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

D6268-15: Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C2HF5)

D6272-17: Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

D6279-15: Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings

D6280-98(2014): Standard Specification for Zinc Phosphate Pigments

D6284-17: Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine

D6287-09: Standard Practice for Cutting Film and Sheeting Test Specimens

D6288-15: Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing

D6289-13: Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

D6290-13: Standard Test Method for Color Determination of Plastic Pellets

D6302-98(2017): Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins

D6319-10(2015): Standard Specification for Nitrile Examination Gloves for Medical Application

D632-12: Standard Specification for Sodium Chloride

D6324-11(2017): Standard Specification for Male Condoms Made from Polyurethane

D6325-98(2011): Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives

D6332-12(2017): Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors

D6336-11(2017): Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer

D6337-98(2013): Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics

D6338-17: Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods

D6339-11: Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

D6341-16: Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)

D6342-12(2017)e1: Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

D635-14: Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

D6355-07(2017): Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves

D6358-11: Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods

D6360-15: Standard Practice for Enclosed Carbon-Arc Exposures of Plastics

D6361/D6361M-98(2015): Standard Guide for Selecting Cleaning Agents and Processes

D6367-17: Standard Specification for AMS (α-Methylstyrene)

D6368-06(2012): Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide

D6370-99(2014): Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)

D638-14: Standard Test Method for Tensile Properties of Plastics

D6383/D6383M-99(2015): Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

D6385-99(2017): Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing

D6386-16a: Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

D6387-99(2014)e1: Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography

D6394-14: Standard Specification for Sulfone Plastics (SP)

D6395-11: Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics

D6396-99(2012): Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees

D6411/D6411M-99(2012): Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

D6412/D6412M-99(2012): Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials

D6415/D6415M-06a(2013): Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

D6416/D6416M-16: Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

D6419-00(2009): Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks

D6434-12: Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes

D6436-14: Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers

D6437-05(2016)e1: Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)

D6438-05(2015): Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography

D6440-10: Standard Terminology Relating to Hydrocarbon Resins

D6441-05(2016): Standard Test Methods for Measuring the Hiding Power of Powder Coatings

D6442-06(2012): Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water

D6456-10: Standard Specification for Finished Parts Made from Polyimide Resin

D6457-08(2013): Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)

D6463/D6463M-06(2012): Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading

D6464-03a(2017): Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing

D6465-99(2016): Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants

D6471-10: Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service

D6472-10: Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service

D6474-12: Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

D648-16: Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

D6484/D6484M-14: Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

D6485-11: Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets

D6487-10: Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press

D6488-08(2013): Standard Terminology Relating to Print Problems

D6489-99(2012): Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating

D6490-99(2014): Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels

D6491-09(2016): Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test

D6492-99(2016): Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel

D6493-11(2015): Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus

D6494-99(2015): Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction

D6499-16: Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products

D6505-00(2012): Standard Test Method for Assay of normal-Propyl Bromide Content

D6507-16: Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials

D6515-00(2016): Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending

D6526-12: Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography

D6531-00(2010): Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement

D6532-00(2014): Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

D6541-11(2015): Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF3CH2CF3)

D6552-06(2016): Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols

D6556-16: Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption

D6558-00A(2015)e1: Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

D6559-00A(2016)e1: Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

D6561-06(2016): Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace

D6562-12: Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace

D6563-12: Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography

D6576-13: Standard Specification for Flexible Cellular Rubber Chemically Blown

D6577-15: Standard Guide for Testing Industrial Protective Coatings

D6578/D6578M-13: Standard Practice for Determination of Graffiti Resistance

D6579-11(2015): Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography

D6580-00(2009): Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings

D6583-13: Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

D6585-17: Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

D6586-03(2014): Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests

D660-93(2011): Standard Test Method for Evaluating Degree of Checking of Exterior Paints

D6600-00(2013): Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods

D6601-15: Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer

D6602-13: Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

D6604-00(2013): Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry

D6605-06(2015): Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating

D6606-00(2017): Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer

D661-93(2011): Standard Test Method for Evaluating Degree of Cracking of Exterior Paints

D6619-00(2016): Standard Practice for Incorporating Pigments by High Speed Dispersion

D662-93(2011): Standard Test Method for Evaluating Degree of Erosion of Exterior Paints

D6621-00(2017): Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials

D6625-13: Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus

D6641/D6641M-16e1: Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

D6645-01(2010): Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

D6646-03(2014): Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon

D6647-01(2011): Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption

D6660-01(2014)e1: Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method

D6662-17: Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

D6665-09(2014): Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test

D6669-12: Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints

D6671/D6671M-13e1: Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites

D6675-01(2015): Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

D6676/D6676M-13: Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating

D6677-07(2012): Standard Test Method for Evaluating Adhesion by Knife

D6686-01(2013): Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings

D6687-07(2013): Standard Guide for Testing Printing Ink Vehicles and Components Thereof

D6688-11: Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique

D6690-15: Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

D6691-09: Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum

D6695-16: Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

D6712-17: Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

D6713-14: Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

D6728-16: Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

D6736-08(2013): Standard Test Method for Burnish Resistance of Latex Paints

D6737-12(2017): Standard Test Method for Bulk Density of Tapered Paintbrush Filaments

D6738-15: Standard Test Method for Precipitated Silica—Volatile Content

D6739-11(2015): Standard Test Method for Silica—pH Value

D6740-15: Standard Test Method for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition

D6741-10(2015): Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content

D6742/D6742M-17: Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates

D6746-15: Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds

D6754/D6754M-15: Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

D6761-17: Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

D6762-02a(2009)e1: Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings

D6763-16: Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

D6777-16: Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding

D6778-14: Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

D6779-17: Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

D6781-02(2014): Standard Guide for Carbon Reactivation

D6783-05(2011): Standard Specification for Polymer Concrete Pipe

D6785-13: Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry

D6801-07(2015): Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials

D6802-02(2010): Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry

D6803-13: Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers

D6806-02(2012): Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography

D6809-02(2016): Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials

D6814-02(2013): Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density

D6827-02(2016): Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)

D6832-13e1: Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide

D6835-17: Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

D6843-10(2015): Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)

D6844-10(2015): Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)

D6845-12: Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area

D6846-02(2012): Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

D6851-02(2011): Standard Test Method for Determination of Contact pH with Activated Carbon

D6854-15a: Standard Test Method for Silica—Oil Absorption Number (OAN)

D6856/D6856M-03(2016): Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials

D6862-11(2016): Standard Test Method for 90 Degree Peel Resistance of Adhesives

D6864-11: Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products

D6865-17: Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials

D6867-03(2014): Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing

D6868-17: Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities

D6869-03(2011): Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

D6873/D6873M-17: Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates

D6875-12: Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor

D6877-13e1: Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace

D6878/D6878M-17: Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

D6886-14e1: Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography

D6887-03(2013): Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions

D6900-10(2015): Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

D6901-15: Standard Specification for Artists' Colored Pencils

D6902-04(2011): Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings

D6903-07(2013): Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water

D6904-03(2013): Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

D6905-03(2012): Standard Test Method for Impact Flexibility of Organic Coatings

D6906-12a(2016): Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence

D6909-10(2016): Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer

D6915-17e1: Standard Practice for Carbon Black—Evaluation of Standard Reference Blacks

D6924-03(2017): Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

D6942-03(2012): Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments

D6943-15: Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings

D6944-15: Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling

D6947/D6947M-16: Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System

D695-15: Standard Test Method for Compressive Properties of Rigid Plastics

D6953-11: Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

D6954-04(2013): Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

D6957-12: Standard Practice for Measuring Curl in Paint Brush Filling Material

D696-16: Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

D6966-13: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

D6976-13: Standard Specification for Rubber Contraceptives—Vaginal Diaphragms

D6977-04(2016): Standard Specification for Polychloroprene Examination Gloves for Medical Application

D6978-05(2013): Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs

D6979-13: Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

D6980-17: Standard Test Method for Determination of Moisture in Plastics by Loss in Weight

D6988-13: Standard Guide for Determination of Thickness of Plastic Film Test Specimens

D6989-03(2013): Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions

D6990-05(2011): Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems

D6991-17e1: Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method

D7011-15: Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

D7018/D7018M-12: Standard Terminology Relating to Glass Fiber and Its Products

D7027-13: Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine

D7028-07(2015): Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)

D7029-17: Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)

D7035-16: Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D704-99(2012): Standard Specification for Melamine-Formaldehyde Molding Compounds

D7049-17: Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres

D705-99(2012): Standard Specification for Urea-Formaldehyde Molding Compounds

D7050-04(2014): Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties

D7054-04(2013): Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America

D7055-14: Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

D7057-13: Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)

D706-15: Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)

D707-15: Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)

D7072-04(2013): Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings

D7073-05(2012): Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films

D7078/D7078M-12: Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

D7082-15: Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

D7083-16: Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

D7084-04(2017): Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers

D7085-04(2010)e1: Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

D7087-05a(2010): Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments

D7088-17: Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

D7089-06(2014): Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing

D709-17: Standard Specification for Laminated Thermosetting Materials

D7090-04(2010): Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography

D7091-13: Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

D7093-13: Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome

D7102-17: Standard Guide for Determination of Endotoxin on Sterile Medical Gloves

D7103-06(2013): Standard Guide for Assessment of Medical Gloves

D711-10(2015): Standard Test Method for No-Pick-Up Time of Traffic Paint

D7119/D7119M-13a: Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing

D7121-05(2012): Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum

D7122-17: Standard Specification for HCFC Blend B (CF3CCl2H, Ar, and CF4)

D7123-17: Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl 2H, Ar, and CF4)

D7124-17: Standard Specification for Benzene for Use with Zeolite Based Catalysts

D7125-17: Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process

D7127-13: Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

D713-12: Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials

D7132-14: Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam

D7133-16: Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

D7134-05(2012): Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)

D7136/D7136M-15: Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

D7137/D7137M-17: Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

D714-02(2009): Standard Test Method for Evaluating Degree of Blistering of Paints

D7143-17: Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products

D7144-05a(2016): Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination

D7149-05(2016): Standard Practice for Determining the Freeze Thaw Stability of Adhesives

D715-86(2014): Standard Test Methods for Analysis of Barium Sulfate Pigment

D7151-15: Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D716-86(2012): Standard Test Methods for Evaluating Mica Pigment

D7160-16: Standard Practice for Determination of Expiration Dating for Medical Gloves

D7161-16: Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions

D7163-11: Standard Test Method for Specular Gloss of Printed Matter

D717-86(2014): Standard Test Methods for Analysis of Magnesium Silicate Pigment

D7174-05(2016): Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

D718-86(2014): Standard Test Methods for Analysis of Aluminum Silicate Pigment

D7180/D7180M-05(2013)e1: Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects

D7183-16: Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

D7184-15: Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

D7185-17: Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene

D7187-15: Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching

D7188-05(2010): Standard Terminology for Printing Inks, Materials, and Processes

D7189-12: Standard Test Method for Relative Mileage of News Ink on Newsprint

D7190-10(2015): Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films

D7191-10: Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

D7192-10: Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors

D7193-17: Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape

D7194-12: Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)

D7195-16a: Standard Guide for Setting Object Color Specifications

D7198-05(2012): Standard Specification for Disposable Embalming Gloves for Single-Use Applications

D7200-12: Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy

D7201-06(2011): Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)

D7202-15: Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection

D7205/D7205M-06(2016): Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars

D7206/D7206M-06(2013)e1: Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals

D7210-13: Standard Practice for Extraction of Additives in Polyolefin Plastics

D7211-13: Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use

D7216-17: Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

D7219-08(2014): Standard Specification for Isotropic and Near-isotropic Nuclear Graphites

D7225-13: Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors

D7232-06(2016): Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight

D7233-08(2017): Standard Test Method for Testing Fracture of Level Paintbrush Filaments

D7234-12: Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

D7244-06a(2011): Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings

D7245-09(2014): Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating

D7246-06(2015): Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves

D7247-16: Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures

D7248/D7248M-12(2017): Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens

D7249/D7249M-16e1: Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure

D7250/D7250M-16: Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness

D7251-11: Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products

D7252-17: Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates

D7253-16: Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

D7254-17: Standard Specification for Polypropylene (PP) Siding

D7258-17: Standard Specification for Polymeric Piles

D7264/D7264M-15: Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials

D7266-13e1: Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)

D7270-07(2013): Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings

D7271-06(2012): Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer

D7290-06(2017): Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

D7291/D7291M-15: Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

D7292-12: Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

D7293-12: Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

D7296-12: Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds

D7301-11(2015): Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose

D7304-16: Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC

D7305-08a(2013): Standard Test Method for Reflection Density of Printed Matter

D7306-07(2017): Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation

D7307-06(2016): Standard Practice for Sampling of Thermoplastic Traffic Marking Materials

D7308-17: Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials

D7309-13: Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

D731-10: Standard Test Method for Molding Index of Thermosetting Molding Powder

D7310-11: Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors

D732-17: Standard Test Method for Shear Strength of Plastics by Punch Tool

D7323-13: Standard Practice for Handling, Transportation, and Storage of IG-100 (Nitrogen)

D7324-13: Standard Practice for Handling, Transportation, and Storage of IG-55 Ar N2

D7325-13: Standard Practice for Handling, Transportation, and Storage of IG-541 N2, Ar , CO2

D7326-17: Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF3, CHF2 CF3, and CO2)

D7327-17: Standard Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2)

D7329-07(2012): Standard Specification for Food Preparation and Food Handling (Food Service) Gloves

D7332/D7332M-16: Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

D7334-08(2013): Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement

D7336/D7336M-16: Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials

D7337/D7337M-12: Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars

D7339-12: Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography

D7354-11: Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings

D7355-10: Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings

D7356/D7356M-13: Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device

D7358-07(2013): Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit

D7359-14a: Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

D7360-16: Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration

D7374-08(2015): Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber

D7376-10a(2016): Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals

D7377-09(2013): Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet

D7378-16: Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness

D7385-13: Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion

D7388-08(2013): Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)

D7389-07(2012): Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes

D7393-16: Standard Practice for Indicating Oil in Abrasives

D7394-17: Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers

D7395-07(2012): Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate

D7396-14: Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

D740-11: Standard Specification for Methyl Ethyl Ketone

D7425/D7425M-13: Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

D7426-08(2013): Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

D7427-16: Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex

D7436-17: Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology

D7437-08(2013): Standard Test Method for Temperature and Hard Water Stability of Engine Coolants

D7439-14: Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

D7441-08(2013): Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples

D7442-16: Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy

D7444-11: Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics

D7445-17: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

D7446-09(2017): Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials

D7447-08(2014): Standard Practice for Symbolizing Adhesive Applications

D7457-12: Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

D746-14: Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

D747-10: Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

D7471-09(2014): Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials

D7472-09(2014): Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials

D7473-12: Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations

D7474-17: Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

D7475-11: Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions

D7486-14: Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

D7487-13e1: Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test

D7488-11(2016): Standard Test Method for Open Time of Latex Paints

D7489-09(2017): Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions

D7490-13: Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements

D750-12(2017): Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus

D7504-17a: Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

D7509-09(2015): Standard Specification for Fluorocarbon Feedstock Grade Chloroform

D7514-14: Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

D7515-09(2014): Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)

D7517-09(2014): Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines

D7518-10(2015)e1: Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service

D7522/D7522M-15: Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate

D7532-09(2016): Standard Practice for Determination of Re-tack Ability of Carpet Adhesives

D7536-16: Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D7538-09(2013): Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

D7539-10(2015): Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

D7540-09(2013): Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller

D7541-11(2015): Standard Practice for Estimating Critical Surface Tensions

D7542-15: Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

D7557/D7557M-09(2013)e1: Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens

D7558-09(2014): Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves

D7565/D7565M-10(2017): Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures

D7568-17: Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications

D7583-16: Standard Test Method for John Deere Coolant Cavitation Test

D7588-11: Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container

D7605-11(2016): Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers

D7615/D7615M-11: Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates

D7616/D7616M-11(2017): Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures

D7617/D7617M-11(2017): Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars

D763-06(2012): Standard Specification for Raw and Burnt Umber Pigments

D7633-13: Standard Test Method for Carbon Black—Carbon Content

D7635/D7635M-10: Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

D7639-10(2014): Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence

D7640-16: Standard Specification for Engine Coolant Grade Glycerin

D7646-10(2014): Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

D765-87(2014): Standard Specification for Raw and Burnt Sienna Pigments

D7661-10: Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms

D7662-15: Standard Test Method for Carbon Content in Carbon Black Feedstock Oils

D7673/D7673M-15: Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl)

D7679-16: Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils

D768-01(2012): Standard Specification for Yellow Iron Oxide Hydrated

D7680-10: Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester

D7681-11(2016): Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

D7682-17: Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

D769-01(2012): Standard Specification for Black Synthetic Iron Oxide

D770-11: Standard Specification for Isopropyl Alcohol

D7704-16: Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration

D7705/D7705M-12: Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction

D7706-17: Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers

D7707-11(2016): Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust

D7711-11(2015): Standard Guide for Description of Polymer Pellet Defects

D7713-12: Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)

D7714-11(2016)e1: Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service

D7715-12(2016)e1: Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines

D7716-11a: Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography

D772-86(2011): Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints

D7723-11: Standard Test Method for Rubber Property - Macro-Dispersion of Fillers in Compounds

D7724-11(2016): Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)

D7733-12(2016): Standard Specification for Acrylic Dispersion Ground

D7734/D7734M-13: Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method

D7735-17: Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures

D7736-12: Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol

D7744/D7744M-11: Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes

D7745-11: Standard Practice for Testing Pultruded Composites

D7750-12(2017): Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer

D7766/D7766M-16: Standard Practice for Damage Resistance Testing of Sandwich Constructions

D7767-11: Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them

D7768-12: Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography

D7771-17: Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black

D7772-15: Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract

D7773-12: Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography

D7774-17: Standard Test Method for Flexural Fatigue Properties of Plastics

D7775-16: Standard Guide for Measurements on Small Graphite Specimens

D7779-11(2015): Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

D7786-13: Standard Test Method for Determining Enamel Holdout

D7787/D7787M-13: Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings

D7791-17: Standard Test Method for Uniaxial Fatigue Properties of Plastics

D7793-17: Standard Specification for Insulated Vinyl Siding

D7799-12a: Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings

D7801-17: Standard Terminology for Paint Brush Application Tools

D7802-12(2016): Standard Terminology for Paint Roller Application Tools

D7803-12: Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

D7804-12(2017): Standard Test Method for Fiber Shedding of Paint Roller Covers

D7805-13: Standard Terminology for Printing Ink Vehicles and Related Materials

D7815-17: Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF2BrCl)

D7820-12: Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel

D7821-12: Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)

D7822-13: Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids

D7823-16: Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry

D7834-13: Standard Test Method for Filling Material Shedding of Paint Brushes

D7835/D7835M-13: Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine

D7836-13: Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials

D7840-12(2017): Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware

D7846-16: Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites

D785-08(2015): Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

D7850-13: Standard Specification for Biological Properties of Industry Reference Materials (IRM)

D7854-16: Standard Test Method for Carbon Black-Void Volume at Mean Pressure

D7855/D7855M-13: Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation

D7856-15a: Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space

D7859-13e1: Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers

D7867-13: Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature

D7868-13: Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings

D7869-17: Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

D787-12: Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

D7871-13: Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)

D788-16: Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

D7881-13: Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode

D7882-13: Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode

D7883-13: Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography

D7884-13: Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography

D7888-13: Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings

D789-15: Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)

D79-86(2014): Standard Specification for Zinc Oxide Pigments

D790-17: Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D792-13: Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

D800-05(2014): Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions

D801-02(2013): Standard Test Methods for Sampling and Testing Dipentene

D802-02(2013): Standard Test Methods for Sampling and Testing Pine Oils

D803-15: Standard Test Methods for Testing Tall Oil

D804-12(2017): Standard Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products

D81-87(2014): Standard Specification for Basic Carbonate White Lead Pigment

D813-07(2014): Standard Test Method for Rubber Deterioration—Crack Growth

D814-95(2014): Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids

D816-06(2016): Standard Test Methods for Rubber Cements

D817-12: Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate

D820-93(2016): Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents

D822/D822M-13: Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

D823-95(2012)e1: Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

D83-84(2014): Standard Specification for Red Lead Pigment

D832-07(2012): Standard Practice for Rubber Conditioning For Low Temperature Testing

D841-17a: Standard Specification for Nitration Grade Toluene

D843-17: Standard Specification for Nitration Grade Xylene

D847-16: Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons

D848-14: Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons

D849-15: Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons

D85-05(2011): Standard Specification for Ochre Pigment

D850-16: Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

D852-16: Standard Test Method for Solidification Point of Benzene

D865-11: Standard Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)

D868-10(2015): Standard Practice for Determination of Degree of Bleeding of Traffic Paint

D869-85(2015): Standard Test Method for Evaluating Degree of Settling of Paint

D870-15: Standard Practice for Testing Water Resistance of Coatings Using Water Immersion

D871-96(2010): Standard Test Methods of Testing Cellulose Acetate

D876-13: Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

D882-12: Standard Test Method for Tensile Properties of Thin Plastic Sheeting

D883-17: Standard Terminology Relating to Plastics

D885/D885M-10A(2014)e1: Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers

D889-13: Standard Test Method for Volatile Oil in Rosin

D890-12(2016): Standard Test Method for Water in Liquid Pine Chemicals

D891-09: Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals

D896-04(2010)e1: Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents

D897-08(2016): Standard Test Method for Tensile Properties of Adhesive Bonds

D899-00(2013): Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive

D903-98(2010): Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

D904-99(2013): Standard Practice for Exposure of Adhesive Specimens to Artificial Light

D905-08(2013): Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

D906-98(2017): Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading

D907-15: Standard Terminology of Adhesives

D913-15: Standard Practice for Evaluating Degree of Traffic Marking Line Wear

D914-12: Standard Test Methods for Ethylcellulose

D922-11: Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing

D925-14: Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)

D926-08(2013): Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)

D928-03(2017): Standard Specification for Sodium Bicarbonate

D945-16: Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)

D950-03(2011): Standard Test Method for Impact Strength of Adhesive Bonds

D952-15: Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

D953-10: Standard Test Method for Bearing Strength of Plastics

D955-08(2014): Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

D957-12: Standard Practice for Determining Surface Temperature of Molds for Plastics

D962-81(2014): Standard Specification for Aluminum Powder and Paste Pigments for Paints

D964-03(2014): Standard Specification for Metallic Copper Powder for Use in Antifouling Paints

D968-17: Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

D98-15: Standard Specification for Calcium Chloride

D991-89(2014): Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products

D994/D994M-11(2016): Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

E1053-11: Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces

E1064-16: Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration

E1069-85(2009): Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress

E1097-12(2017): Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

E1119-09(2015)e1: Standard Specification for Industrial Grade Ethylene Glycol

E1120-16: Standard Specification for Liquid Chlorine

E1146-16: Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)

E1157-87(2011): Standard Specification for Sampling and Testing of Reusable Laboratory Glassware

E1177-14: Standard Specification for Engine Coolant Grade Glycol

E1184-10(2016): Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry

E1226-12a: Standard Test Method for Explosibility of Dust Clouds

E1228-17: Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure

E1229-16: Standard Specification for Calcium Hypochlorite

E1231-15: Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials

E1232-07(2013): Standard Test Method for Temperature Limit of Flammability of Chemicals

E1251-17a: Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

E1262-88(2013): Standard Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay

E1277-14: Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry

E1300-16: Standard Practice for Determining Load Resistance of Glass in Buildings

E1329-10: Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis

E1335-08(2017): Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

E1361-02(2014)e1: Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis

E1386-15: Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction

E1426-14: Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques

E1445-08(2015): Standard Terminology Relating to Hazard Potential of Chemicals

E1446-13: Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry

E1479-16: Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers

E1491-06(2012): Standard Test Method for Minimum Autoignition Temperature of Dust Clouds

E1508-12a: Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

E1515-14: Standard Test Method for Minimum Explosible Concentration of Combustible Dusts

E1547-09(2017): Standard Terminology Relating to Industrial and Specialty Chemicals

E1555-12: Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair

E1556-12: Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair

E1568-13: Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

E1584-17: Standard Test Method for Assay of Nitric Acid

E1600-15: Standard Test Methods for Determination of Gold in Cyanide Solutions

E1601-12: Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

E1613-12: Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

E1621-13: Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry

E1644-17: Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

E1645-16: Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

E1655-05(2012): Standard Practices for Infrared Multivariate Quantitative Analysis

E1726-16: Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis

E1728-16: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

E1746-17a: Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities

E1753-13: Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films

E1754-17a: Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry

E1770-14: Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment

E1773-10: Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

E1775-16: Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead

E1786-17a: Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry

E1787-16: Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography

E1788-16: Standard Test Method for Acidity in Acrylonitrile

E1790-04(2016)e1: Standard Practice for Near Infrared Qualitative Analysis

E1792-03(2016): Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

E1794-13: Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels

E1800-13: Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels

E1801-15: Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters

E1805-13: Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry

E1826-12: Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded

E1832-08(2017): Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

E1898-13: Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

E1899-16: Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide

E1908-16: Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

E191-64(2017): Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds

E1922-04(2015): Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials

E1968-11: Standard Guide for Microcrystal Testing in the Forensic Analysis of Cocaine

E1969-11: Standard Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and Amphetamine

E1979-17: Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead

E1981-98(2012)e2: Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry

E200-16: Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis

E2012-06(2012): Standard Guide for the Preparation of a Binary Chemical Compatibility Chart

E2015-04(2014): Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination

E2019-03(2013): Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air

E202-12: Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols

E2021-15: Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers

E203-16: Standard Test Method for Water Using Volumetric Karl Fischer Titration

E2036-15: Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

E2037-15: Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

E2046-14: Standard Test Method for Reaction Induction Time by Thermal Analysis

E2050-17: Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

E2056-04(2016): Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures

E2079-07(2013): Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors

E2111-12: Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals

E2115-15: Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities

E2120-10(2016): Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films

E2125-11: Standard Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues

E2143-01(2013): Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons

E2193-16: Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)

E2194-14(2017): Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials

E2203-14: Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

E222-17: Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation

E223-16: Standard Test Methods for Analysis of Sulfuric Acid

E224-16: Standard Test Methods for Analysis of Hydrochloric Acid

E2252-12: Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities

E2255/E2255M-13: Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings

E2269-14: Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

E2271-05a(2012)e1: Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities

E2313-15: Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)

E2327-15e1: Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis

E2330-12: Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons

E2335-17: Standard Guide for Laboratory Monitors

E236-66(2017): Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups

E2403-06(2012): Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry

E2409-13: Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)

E2469-16: Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography

E2470-09(2015)e1: Standard Specification for Polyester Grade Ethylene Glycol

E2478-11(2016): Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

E2520-15: Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors

E2539-14(2017): Standard Test Method for Multiangle Color Measurement of Interference Pigments

E256-09: Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition

E258-07(2015): Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method

E2649-12: Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

E2664-16: Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol

E2679-09(2016)e1: Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol byNon-Aqueous Potentiometric Titration

E2680-16: Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)

E2693-14: Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment

E2739-10: Standard Specification for Personnel Decontamination System to be Used During a Chemical Event

E2781-16: Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry

E2787-11(2016): Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

E2792-13: Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion

E28-14: Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus

E2805-11: Standard Practice for Measurement of the Biological Activity of Ricin

E2824-11: Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method

E2838-11(2016): Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

E2857-11(2016): Standard Guide for Validating Analytical Methods

E2866-12(2016): Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry

E2881-13e1: Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry

E2885-13: Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications

E291-09: Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)

E2931-13: Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds

E2933-13: Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications

E298-17a: Standard Test Methods for Assay of Organic Peroxides

E299-17a: Standard Test Method for Trace Amounts of Peroxides In Organic Solvents

E300-03(2017): Standard Practice for Sampling Industrial Chemicals

E305-13: Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves

E359-17: Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)

E37-05(2011): Standard Test Methods for Chemical Analysis of Pig Lead

E394-15: Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method

E396-12e1: Standard Test Methods for Chemical Analysis of Cadmium

E406-81(2012): Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis

E410-17a: Standard Test Method for Moisture and Residue in Liquid Chlorine

E411-17a: Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine

E439-17: Standard Test Methods for Chemical Analysis of Beryllium

E449-08(2013): Standard Test Methods for Analysis of Calcium Chloride

E475-16: Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography

E478-08(2017): Standard Test Methods for Chemical Analysis of Copper Alloys

E487-14: Standard Test Method for Constant-Temperature Stability of Chemical Materials

E50-17: Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

E502-07(2013): Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods

E506-17a: Standard Test Method for Mercury in Liquid Chlorine

E520-08(2015)e1: Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry

E53-07(2013): Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

E534-13: Standard Test Methods for Chemical Analysis of Sodium Chloride

E536-16: Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

E537-12: Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry

E538-17a: Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)

E581-17: Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

E582-07(2013)e1: Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures

E611-08(2015)e1: Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography

E640-06(2012): Standard Test Method for Preservatives in Water-Containing Cosmetics

E649-17a: Standard Test Method for Bromine in Chlorine

E659-15: Standard Test Method for Autoignition Temperature of Chemicals

E680-79(2011)e1: Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials

E681-09(2015): Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)

E698-16: Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method

E70-07(2015): Standard Test Method for pH of Aqueous Solutions With the Glass Electrode

E806-17a: Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)

E848-94(2016): Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates

E865-12: Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

E866-11: Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E875-15: Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry

E918-83(2011): Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure

E981-04(2012): Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals

E990-13: Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels

F1001-12(2017): Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials

F1021-95(2013): Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines

F1025-94(2011): Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe

F1041-02(2016): Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing

F1044-05(2011)e1: Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

F105-72(2015): Standard Specification for Type 58 Borosilicate Sealing Glass

F1052-14: Standard Test Method for Pressure Testing Vapor Protective Suits

F1055-16a: Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing

F1056-04(2011): Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

F1057-17: Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

F1066-04(2014)e1: Standard Specification for Vinyl Composition Floor Tile

F1088-04a(2010): Standard Specification for Beta-Tricalcium Phosphate for Surgical Implantation

F109-12: Standard Terminology Relating to Surface Imperfections on Ceramics

F1104-02(2013): Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing

F1105-09(2014): Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing

F1111-08b(2013): Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals

F1127-07(2013): Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel

F1129/F1129M-12: Standard Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids

F1147-05(2017)e1: Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings

F1154-11: Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles and Ensemble Components

F1160-14: Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings

F1164-97(2014): Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress

F1185-03(2014): Standard Specification for Composition of Hydroxylapatite for Surgical Implants

F1186-03(2013): Standard Classification System for Chemicals According to Functional Groups

F1194-99(2010): Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing

F1209-14: Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs

F1210-14: Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

F1216-16: Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

F1231-14: Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks

F1236-16: Standard Guide for Visual Inspection of Electrical Protective Rubber Products

F1279-08(2014): Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces

F1280-14: Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces

F1281-17: Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

F1282-17: Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

F1290-98a(2011): Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings

F1296-08(2015): Standard Guide for Evaluating Chemical Protective Clothing

F1301-90(2011)e1: Standard Practice for Labeling Chemical Protective Clothing

F1303-04(2014): Standard Specification for Sheet Vinyl Floor Covering with Backing

F1312-90(2013): Standard Specification for Brick, Insulating, High Temperature, Fire Clay

F1336-15: Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

F1344-15: Standard Specification for Rubber Floor Tile

F1359/F1359M-16a: Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Manikin

F1365-91(2013): Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals

F1383-12e1: Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact

F14-80(2015): Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal

F140-98(2013): Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods

F1407-12(2017): Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method

F1412-16: Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

F1413-07(2013): Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems

F1417-11a(2015): Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

F1429-99(2014): Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell

F144-80(2015): Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods

F1460-07(2013): Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems

F1461-12: Standard Practice for Chemical Protective Clothing Program

F1473-16: Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

F1483-17: Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

F1488-14: Standard Specification for Coextruded Composite Pipe

F1498-08(2012)e1: Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings

F1504-14: Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation

F1524-95(2013): Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

F1533-01(2009): Standard Specification for Deformed Polyethylene (PE) Liner

F1536-95(2015)e1: Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape

F1545-15a: Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

F1563-01(2011): Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing

F1588-96(2015): Standard Test Method for Constant Tensile Load Joint Test (CTLJT)

F1606-05(2014): Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner

F1609-08(2014): Standard Specification for Calcium Phosphate Coatings for Implantable Materials

F1635-16: Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

F1645/F1645M-16: Standard Test Method for Water Migration in Honeycomb Core Materials

F1664-08(2013): Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

F1665-08(2013): Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

F1668-16: Standard Guide for Construction Procedures for Buried Plastic Pipe

F1673-10(2016): Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

F1674-11: Standard Test Method for Joint Restraint Products for Use with PVC Pipe

F1675-13(2017): Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

F1697-09(2015): Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

F1698-02(2015)e1: Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits

F1700-13a: Standard Specification for Solid Vinyl Floor Tile

F1732-12: Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material

F1733-13: Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing

F1734-03(2009): Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe

F1735-09(2015): Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

F1737/F1737M-15: Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems

F1738-15: Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants

F1741-08(2016): Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

F1742-03(2011): Standard Specification for PVC Insulating Sheeting

F1743-17: Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

F1759-97(2010): Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

F1760-16: Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

F1802-15: Standard Test Method for Performance Testing of Excess Flow Valves

F1803-15: Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter 

F1804-08(2016): Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation

F1807-17: Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

F1839-08(2016): Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments

F1855-00(2011): Standard Specification for Polyoxymethylene (Acetal) for Medical Applications

F1859-14e1: Standard Specification for Rubber Sheet Floor Covering Without Backing

F1860-14e1: Standard Specification for Rubber Sheet Floor Covering With Backing

F1865-09: Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing

F1866-13(2017): Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

F1867-06(2012): Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F1871-11: Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F1872-17: Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations

F1901-16: Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

F1913-04(2014): Standard Specification for Vinyl Sheet Floor Covering Without Backing

F1924-12: Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

F1925-09: Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants

F1926/F1926M-14: Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings

F1947-10: Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits

F1948-15: Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

F1960-15: Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing

F1961-09: Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing

F1962-11: Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings

F1970-12e1: Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

F1973-13e1: Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems

F1974-09(2015): Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

F1986-01(2011): Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems

F1987-01(2011): Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems

F1999-14: Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

F2003-02(2015): Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air

F2018-00(2010): Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens

F2019-11: Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)

F2021-11: Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems

F2023-15: Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water

F2024-10(2016): Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings

F2026-16: Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

F2033-12: Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials

F2038-00(2011): Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials

F2042-00(2011): Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication

F2053-00(2017): Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials

F2059-17: Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Swirling Flask

F2061-12: Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions

F2080-16: Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe

F2098-15: Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings

F2102-17: Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants

F2103-11: Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications

F2109-01(2017): Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces

F2111-01a(2017): Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

F2118-14: Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials

F2130-11: Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials

F2135-01(2017)e1: Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings

F2136-08(2015): Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe

F2138-12(2017): Standard Specification for Excess Flow Valves for Natural Gas Service

F2145-13: Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing

F2147-01(2016): Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens

F2159-14: Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

F2160-16: Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

F2164-13: Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure

F2165-13: Standard Specification for Flexible Pre-Insulated Piping

F2176-17: Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct

F2179-14: Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers

F218-13: Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass

F2205-07(2013): Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments

F2206-14: Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)

F2207-06(2013): Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe

F2212-11: Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)

F2214-16: Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)

F2224-09(2014): Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants

F2231-02(2013): Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes

F2250-13: Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials

F2255-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading

F2256-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading

F2258-05(2015): Standard Test Method for Strength Properties of Tissue Adhesives in Tension

F2259-10(2012)e1: Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy

F2260-03(2012)e1: Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy

F2261-06(2011): Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type

F2262-09: Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9

F2263-14: Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

F2306/F2306M-14e1: Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

F2313-10: Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide

F2315-11: Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels

F2320-11: Standard Specification for Rubber Insulating Sheeting

F2331-11(2016): Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials

F2347-15: Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications

F2381-10: Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

F2389-17a: Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

F2390-12(2017): Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content

F2392-04(2015): Standard Test Method for Burst Strength of Surgical Sealants

F2393-12(2016): Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications

F2418-16a: Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

F2433-05(2013): Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness

F2434-14: Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing

F2435-15: Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe

F2458-05(2015): Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants

F2465/F2465M-05(2016): Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems

F2466-10: Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

F2467-06(2013): Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications

F2468-05(2011): Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications

F2487-13: Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines

F2509-15: Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing

F2510/F2510M-07(2013): Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes

F2523-13: Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers

F2524-06(2013): Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications

F2532-13: Standard Guide for Determining Net Environmental Benefit of Dispersant Use

F2536-06b(2011): Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs

F2561-16: Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner

F2565-13: Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications

F2579-10: Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants

F2588-12: Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles

F2599-16: Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner

F2600-09(2013): Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing

F2602-13: Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)

F2605-16: Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)

F2618-15: Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems

F2619/F2619M-13: Standard Specification for High-Density Polyethylene (PE) Line Pipe

F2620-13: Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings

F2623-14: Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing

F2625-10(2016): Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

F2634-15: Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

F2648/F2648M-13: Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications

F2649-14: Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks

F2657-07(2012): Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing

F2658-07(2013): Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings

F2669-12: Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides

F2686-14: Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe

F2695-12: Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications

F2704-17a: Standard Specification for Air-Fed Protective Ensembles

F2714-08(2013): Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay

F2718-09(2015): Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines

F2719-09(2015): Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines

F2735-09(2016): Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

F2736-13e1: Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe

F2737-11(2017): Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units

F2759-11: Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices

F2763-16: Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

F2764/F2764M-17e1: Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

F2767-12: Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution

F2769-16: Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

F2778-09(2015): Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)

F2785-12: Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings

F2786-16: Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)

F2787-13: Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers

F2788/F2788M-15: Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe

F2805-16: Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections

F2806-10(2015): Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)

F2807-13: Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications

F2815-10(2014): Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program

F2817-13: Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair

F2818-10(2014)e1: Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing

F2820-12: Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications

F2830-11(2017): Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer

F2831-12: Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

F2848-17: Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns

F2854-10(2016): Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing

F2855-12: Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing

F2880-14: Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.

F2881-11(2015): Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

F2896-11(2017): Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids

F2897-15a: Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)

F2902-16e1: Standard Guide for Assessment of Absorbable Polymeric Implants

F2905/F2905M-13: Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications

F2922-13e1: Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers

F2928-13: Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods

F2929-13: Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig

F2945-15: Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings

F2946-12(2017): Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes

F2953-12: Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages

F2969-12: Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe

F2977-13: Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants

F2982-13: Standard Specification for Polyester Composition Floor Tile

F2984-13: Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits

F2986-12(2017): Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications

F2987-12: Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications

F2994-13: Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems

F3009-14: Standard Specification for Polyolefin Composition Floor Tile

F3034-15: Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)

F402-05(2012): Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

F409-17: Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

F437-15: Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

F438-17: Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

F439-13: Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

F441/F441M-15: Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

F442/F442M-13e1: Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

F451-16: Standard Specification for Acrylic Bone Cement

F477-14: Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

F480-14: Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

F481-97(2014): Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

F482-09(2014): Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

F483-09(2014): Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

F484-08(2013): Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds

F485-08(2013): Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces

F493-14: Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

F502-08(2013): Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces

F512-12(2017): Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation

F548-09(2014): Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics

F585-16: Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

F602-09(2015): Standard Criteria for Implantable Thermoset Epoxy Plastics

F603-12(2016): Standard Specification for High-Purity Dense Aluminum Oxide for Medical Application

F610/F610M-15: Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique

F619-14: Standard Practice for Extraction of Medical Plastics

F624-09(2015)e1: Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications

F628-12e2: Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

F639-09(2015): Standard Specification for Polyethylene Plastics for Medical Applications

F641-09(2014): Standard Specification for Implantable Epoxy Electronic Encapsulants

F645-15a: Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

F648-14: Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

F656-15: Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

F665-09(2015): Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application

F668-17: Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric

F679-16: Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

F689-97(2011): Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings

F696-06(2011): Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens

F702-10: Standard Specification for Polysulfone Resin for Medical Applications

F714-13: Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

F716-09: Standard Test Methods for Sorbent Performance of Absorbents

F725-03(2013): Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards

F726-12: Standard Test Method for Sorbent Performance of Adsorbents

F732-17: Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

F734-17: Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material

F735-17: Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method

F736-17: Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight

F739-12e1: Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact

F754-08(2015): Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders

F755-99(2011): Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants

F79-69(2015): Standard Specification for Type 101 Sealing Glass

F791-96(2013): Standard Test Method for Stress Crazing of Transparent Plastics

F794-03(2014): Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

F810-12: Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

F868-17: Standard Classification for Laminated Composite Gasket Materials

F876-17: Standard Specification for Crosslinked Polyethylene (PEX) Tubing

F877-11a: Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems

F881-94(2014): Standard Specification for Silicone Elastomer Facial Implants

F891-16: Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

F894-13: Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

F903-17: Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids

F905-04(2011): Standard Practice for Qualification of Polyethylene Saddle-Fused Joints

F913-02(2014): Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

F925-13: Standard Test Method for Resistance to Chemicals of Resilient Flooring

F945-12: Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

F948-94(2011): Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow

F949-15: Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

F953-14: Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing

F964-13: Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

F997-10: Standard Specification for Polycarbonate Resin for Medical Applications

G10-10(2015): Standard Test Method for Specific Bendability of Pipeline Coatings

G11-04(2012): Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings

G114-14: Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service

G120-15: Standard Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction

G121-98(2015)e1: Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents

G122-96(2015)e1: Standard Test Method for Evaluating the Effectiveness of Cleaning Agents

G127-15: Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems

G13/G13M-13: Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)

G137-97(2009): Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration

G14-04(2010)e1: Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)

G17-07(2013): Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)

G176-03(2009): Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method

G18-07(2013): Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines

G20-10(2015): Standard Test Method for Chemical Resistance of Pipeline Coatings

G42-11: Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures

G55-07(2013): Standard Test Method for Evaluating Pipeline Coating Patch Materials

G6-07(2013): Standard Test Method for Abrasion Resistance of Pipeline Coatings

G62-14: Standard Test Methods for Holiday Detection in Pipeline Coatings

G8-96(2010): Standard Test Methods for Cathodic Disbonding of Pipeline Coatings

G9-07(2013)e1: Standard Test Method for Water Penetration into Pipeline Coatings

G95-07(2013): Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)