All Building & Construction Standards

Search within Building & Construction


A1022/A1022M-16b: Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

A1032-15: Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe

A1035/A1035M-16b: Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

A1040-10(2015)e1: Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels

A1043/A1043M-14: Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

A1044/A1044M-16a: Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

A1045-10(2017): Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems

A1056-12(2017): Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

A1060/A1060M-16b: Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1064/A1064M-17: Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1075-12(2017)e1: Standard Specification for Flanged Steel U-Channel Posts

A1077/A1077M-14: Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

A1078/A1078M-12e1: Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

A184/A184M-17: Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

A283/A283M-13: Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

A328/A328M-13a: Standard Specification for Steel Sheet Piling

A390-06(2016): Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

A392-11a(2017): Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

A416/A416M-17: Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete

A421/A421M-15: Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete

A491-11(2017): Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

A586-04a(2014): Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

A6/A6M-17a: Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

A603-98(2014): Standard Specification for Zinc-Coated Steel Structural Wire Rope

A615/A615M-16: Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

A627-03(2011): Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities

A648-12: Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

A704/A704M-17: Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

A706/A706M-16: Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

A709/A709M-17: Standard Specification for Structural Steel for Bridges

A716-08(2014): Standard Specification for Ductile Iron Culvert Pipe

A722/A722M-15: Standard Specification for High-Strength Steel Bars for Prestressed Concrete

A74-17: Standard Specification for Cast Iron Soil Pipe and Fittings

A740-98(2014): Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

A741-11(2016): Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

A746-09(2014): Standard Specification for Ductile Iron Gravity Sewer Pipe

A755/A755M-16e1: Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

A760/A760M-15: Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

A761/A761M-17: Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

A762/A762M-15: Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

A767/A767M-16: Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

A779/A779M-16: Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

A786/A786M-15: Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

A796/A796M-17: Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

A798/A798M-13: Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

A807/A807M-13: Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

A820/A820M-16: Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

A821/A821M-15: Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

A824-01(2017): Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

A849-15: Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

A857/A857M-07(2013): Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

A861-04(2017): Standard Specification for High-Silicon Iron Pipe and Fittings

A862/A862M-98(2014): Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

A881/A881M-16a: Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete

A886/A886M-16: Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

A888-17a: Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

A910/A910M-16: Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

A911/A911M-15: Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties

A930-09(2014): Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

A944-10(2015): Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

A950/A950M-11(2015): Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

A951/A951M-16: Standard Specification for Steel Wire for Masonry Joint Reinforcement

A955/A955M-17a: Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

A964/A964M-17: Standard Specification for Corrugated Steel Box Culverts

A970/A970M-16: Standard Specification for Headed Steel Bars for Concrete Reinforcement

A978/A978M-08(2013): Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

A979/A979M-03(2014)e1: Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

A981/A981M-11(2016): Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

A996/A996M-16: Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

A998/A998M-12: Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications

B100-13: Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

B101-12: Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

B22/B22M-17: Standard Specification for Bronze Castings for Bridges and Turntables

B306-13: Standard Specification for Copper Drainage Tube (DWV)

B370-12: Standard Specification for Copper Sheet and Strip for Building Construction

B506-16: Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

B745/B745M-15: Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

B746/B746M-16: Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

B788/B788M-09(2014): Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe

B789/B789M-16: Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers

B790/B790M-16: Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits

B812-96(2013): Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications

B864/B864M-13: Standard Specification for Corrugated Aluminum Box Culverts

B882-10: Specification for Pre-Patinated Copper for Architectural Applications

C10/C10M-14: Standard Specification for Natural Cement

C1002-16: Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

C1005-17: Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements

C1006-07(2013): Standard Test Method for Splitting Tensile Strength of Masonry Units

C1007-11a(2015): Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

C1012/C1012M-15: Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

C1014-17: Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

C1015-17: Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation

C1016-14: Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

C1017/C1017M-13e1: Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

C1019-16: Standard Test Method for Sampling and Testing Grout

C1021-08(2014): Standard Practice for Laboratories Engaged in Testing of Building Sealants

C1026-13: Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling

C1027-09: Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile

C1029-15: Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

C1032-14: Standard Specification for Woven Wire Plaster Base

C1037-16: Standard Practice for Inspection of Underground Precast Concrete Utility Structures

C1038/C1038M-14b: Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water

C1040/C1040M-16a: Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods

C1041-10: Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers

C1043-16: Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources

C1044-16: Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

C1045-07(2013): Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

C1046-95(2013): Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

C1047-14a: Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

C1048-12e1: Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass

C1053-00(2015): Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications

C1055-03(2014): Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries

C1057-17: Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer

C1058/C1058M-10(2015): Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

C1059/C1059M-13: Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

C1060-11a(2015): Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

C1063-17a: Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

C1064/C1064M-17: Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

C1067-12: Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials

C1071-16: Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

C1072-13e1: Standard Test Methods for Measurement of Masonry Flexural Bond Strength

C1073-12: Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

C1074-11: Standard Practice for Estimating Concrete Strength by the Maturity Method

C1077-17: Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

C1080-98(2014): Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers

C1081-98(2014): Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers

C1082-98(2014): Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill

C1083-06(2015): Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials

C1084-10: Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

C1086-09(2016): Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation

C1087-16: Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

C1088-17: Standard Specification for Thin Veneer Brick Units Made From Clay or Shale

C1089-13: Standard Specification for Spun Cast Prestressed Concrete Poles

C109/C109M-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

C1091-03a(2013): Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines

C1093-15ae1: Standard Practice for Accreditation of Testing Agencies for Masonry

C1096/C1096M-07(2011)e1: Standard Test Method for Determination of Wood Fiber in Asbestos Cement

C1097-13: Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures

C11-17a: Standard Terminology Relating to Gypsum and Related Building Materials and Systems

C1101/C1101M-06(2012): Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation

C1103-14: Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

C1103M-14: Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

C1104/C1104M-13a: Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

C1105-08a(2016): Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

C1106-00(2012): Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick

C1107/C1107M-14a: Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

C1114-06(2013): Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

C1115-17: Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

C1116/C1116M-10a(2015): Standard Specification for Fiber-Reinforced Concrete

C1119/C1119M-90(2015): Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes

C1120/C1120M-98(2011)e1: Standard Test Method for Wash Test of Asbestos

C1121/C1121M-04(2015): Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos

C1122/C1122M-90(2015): Standard Test Method for Wet Volume of Asbestos

C1123/C1123M-90(2015): Standard Test Method for Compressibility and Recovery of Asbestos

C1124/C1124M-90(2015): Standard Test Method for Kerosene Retention of Asbestos

C1125-89(2015): Standard Test Method for Penetration Index of Asbestos

C1126-15: Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

C1129-17: Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges

C1130-17: Standard Practice for Calibration of Thin Heat Flux Transducers

C1131-10(2015): Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems

C1134-17: Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion

C1135-15: Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

C1136-17: Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

C1138M-12: Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)

C1139-14: Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications

C114-15: Standard Test Methods for Chemical Analysis of Hydraulic Cement

C1140/C1140M-11: Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

C1141/C1141M-15: Standard Specification for Admixtures for Shotcrete

C1142-95(2013): Standard Specification for Extended Life Mortar for Unit Masonry

C1146-09(2013): Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air

C1148-92a(2014): Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar

C1149-17: Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

C115/C115M-10e1: Standard Test Method for Fineness of Portland Cement by the Turbidimeter

C1152/C1152M-04(2012)e1: Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

C1153-10(2015): Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

C1154-06(2016): Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products

C1155-95(2013): Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data

C1157/C1157M-17: Standard Performance Specification for Hydraulic Cement

C1159-98(2012): Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete

C1160-97(2012): Standard Specification for Chemical-Resistant Carbon Brick

C1162/C1162M-90(2015): Standard Test Method for Loose Density of Asbestos

C1164-14: Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source

C1166-06(2016): Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

C1167-11: Standard Specification for Clay Roof Tiles

C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

C1170/C1170M-14e1: Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

C1172-14: Standard Specification for Laminated Architectural Flat Glass

C1173-10(2014): Standard Specification for Flexible Transition Couplings for Underground Piping Systems

C1176/C1176M-13: Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

C1177/C1177M-13: Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

C1178/C1178M-13: Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

C118-15: Standard Specification for Concrete Pipe for Irrigation or Drainage

C1180-10: Standard Terminology of Mortar and Grout for Unit Masonry

C1181-00(2012): Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts

C1183/C1183M-13: Standard Test Method for Extrusion Rate of Elastomeric Sealants

C1184-14: Standard Specification for Structural Silicone Sealants

C1185-08(2016): Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

C1186-08(2016): Standard Specification for Flat Fiber-Cement Sheets

C118M-15: Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)

C119-16: Standard Terminology Relating to Dimension Stone

C1193-16: Standard Guide for Use of Joint Sealants

C1194-03(2011): Standard Test Method for Compressive Strength of Architectural Cast Stone

C1195-03(2011): Standard Test Method for Absorption of Architectural Cast Stone

C1196-14a: Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements

C1197-14a: Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method

C1199-14: Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

C12-16a: Standard Practice for Installing Vitrified Clay Pipe Lines

C120/C120M-15a: Standard Test Methods for Flexure Testing of Structural and Roofing Slate

C1201/C1201M-15: Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference

C1202-17: Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

C1208/C1208M-16a: Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

C121/C121M-15: Standard Test Method for Water Absorption of Slate

C1214-13: Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method

C1214M-13: Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)

C1216/C1216M-13: Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

C1218/C1218M-17: Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

C1222-17: Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

C1224-15: Standard Specification for Reflective Insulation for Building Applications

C1225-08(2016): Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates

C1227-13: Standard Specification for Precast Concrete Septic Tanks

C1228-96(2015): Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete

C1229-94(2015): Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)

C123/C123M-14: Standard Test Method for Lightweight Particles in Aggregate

C1230-96(2015): Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

C1231/C1231M-15: Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens

C1232-17: Standard Terminology for Masonry

C1240-15: Standard Specification for Silica Fume Used in Cementitious Mixtures

C1241-14: Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

C1242-16: Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

C1243-93(2015)e1: Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc

C1244-11(2017): Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill

C1244M-11(2017): Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)

C1245/C1245M-12: Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)

C1246-17: Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

C1247-14: Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

C1248-08(2012): Standard Test Method for Staining of Porous Substrate by Joint Sealants

C1249-06a(2010): Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

C125-16: Standard Terminology Relating to Concrete and Concrete Aggregates

C1252-17: Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

C1253-14: Standard Test Method for Determining the Outgassing Potential of Sealant Backing

C1257-15: Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

C1258-08(2013): Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation

C126-16: Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

C1260-14: Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

C1261-13: Standard Specification for Firebox Brick for Residential Fireplaces

C1263-95(2015): Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders

C1264-14a: Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products

C1265-17: Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

C1266-17: Standard Test Method for Flow Characteristics of Preformed Tape Sealants

C127-15: Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate

C1272-17: Standard Specification for Heavy Vehicular Paving Brick

C1277-15: Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

C1278/C1278M-17: Standard Specification for Fiber-Reinforced Gypsum Panel

C1279-13: Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

C128-15: Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate

C1280-13a: Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing

C1281-16: Standard Specification for Preformed Tape Sealants for Glazing Applications

C1283-15: Standard Practice for Installing Clay Flue Lining

C1288-17: Standard Specification for Fiber-Cement Interior Substrate Sheets

C1289-17: Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

C129-17: Standard Specification for Nonloadbearing Concrete Masonry Units

C1290-16: Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

C1293-08b(2015): Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

C1294-15: Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

C1298-95(2013): Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys

C1303/C1303M-15: Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

C1304-08(2013): Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials

C1311-14: Standard Specification for Solvent Release Sealants

C1312-97(2012): Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory

C1313/C1313M-13: Standard Specification for Sheet Radiant Barriers for Building Construction Applications

C1314-16: Standard Test Method for Compressive Strength of Masonry Prisms

C1315-11: Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

C1319-17: Standard Specification for Concrete Grid Paving Units

C1320-10(2016): Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction

C1321-15: Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction

C1324-15: Standard Test Method for Examination and Analysis of Hardened Masonry Mortar

C1325-17a: Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units

C1328/C1328M-12: Standard Specification for Plastic (Stucco) Cement

C1329/C1329M-16a: Standard Specification for Mortar Cement

C1330-02(2013): Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

C1335-12: Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

C1338-14: Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings

C1339-02(2012): Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts

C1340/C1340M-10(2015): Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program

C1349-17: Standard Specification for Architectural Flat Glass Clad Polycarbonate

C1352/C1352M-15: Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone

C1353/C1353M-15a: Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser

C1354/C1354M-15: Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone

C1355/C1355M-96(2015): Standard Specification for Glass Fiber Reinforced Gypsum Composites

C1356-07(2012): Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure

C1363-11: Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

C1364-17: Standard Specification for Architectural Cast Stone

C1365-06(2011): Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

C1367-06(2012): Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

C1369-07(2014): Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

C1370-00(2012): Standard Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes

C1371-15: Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

C1372-17: Standard Specification for Dry-Cast Segmental Retaining Wall Units

C1373/C1373M-11(2017): Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

C1374-14: Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

C1375-00(2014): Standard Guide for Substrates Used in Testing Building Seals and Sealants

C1376-15: Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass

C1378-04(2014): Standard Test Method for Determination of Resistance to Staining

C138/C138M-17a: Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

C1381/C1381M-97(2013): Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts

C1382-16: Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

C1383-15: Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

C1384-12a: Standard Specification for Admixtures for Masonry Mortars

C1385/C1385M-10: Standard Practice for Sampling Materials for Shotcrete

C139-17: Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes

C1392-00(2014): Standard Guide for Evaluating Failure of Structural Sealant Glazing

C1393-14: Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

C1394-03(2012): Standard Guide for In-Situ Structural Silicone Glazing Evaluation

C1396/C1396M-17: Standard Specification for Gypsum Board

C1397-13: Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

C1399/C1399M-10(2015): Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete

C14-15a: Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

C140/C140M-17a: Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

C1400-11(2017): Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls

C1401-14: Standard Guide for Structural Sealant Glazing

C1403-15: Standard Test Method for Rate of Water Absorption of Masonry Mortars

C1405-16: Standard Specification for Glazed Brick (Single Fired, Brick Units)

C1409-12: Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components

C141/C141M-14: Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

C1410-17: Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation

C1417-15: Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design

C1417M-15: Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)

C142/C142M-17: Standard Test Method for Clay Lumps and Friable Particles in Aggregates

C1422/C1422M-15: Standard Specification for Chemically Strengthened Flat Glass

C1423-16: Standard Guide for Selecting Jacketing Materials for Thermal Insulation

C1427-16: Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

C143/C143M-15a: Standard Test Method for Slump of Hydraulic-Cement Concrete

C1433-16b: Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

C1433M-16b: Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)

C1435/C1435M-14: Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

C1436-13: Standard Specification for Materials for Shotcrete

C1437-15: Standard Test Method for Flow of Hydraulic Cement Mortar

C1438-13(2017): Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

C1439-13: Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

C144-11: Standard Specification for Aggregate for Masonry Mortar

C1440-08(2013)e1: Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

C1442-14: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

C1443-99(2016): Standard Specification for Glasses, Portlight, Circular, Fully Tempered

C1447/C1447M-04(2014): Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe

C1448/C1448M-05(2014): Standard Specification for Non-Asbestos Fiber-Cement Conduit

C1449/C1449M-05a(2014): Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe

C1450/C1450M-04(2014): Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe

C1451-11: Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source

C1459-04(2014): Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems

C1460-12: Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground

C1461-08(2017): Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use

C1467/C1467M-00(2016): Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts

C1472-16: Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

C1478-08(2013): Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals

C1478M-08a(2013): Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)

C1479-16: Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations

C1479M-16: Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)

C1480/C1480M-07(2012): Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application

C1481-12(2017): Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

C1482-17: Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

C1483/C1483M-17: Standard Specification for Exterior Solar Radiation Control Coatings on Buildings

C1484-10: Standard Specification for Vacuum Insulation Panels

C1485-13: Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source

C1486-00(2012): Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings

C1487-02(2012): Standard Guide for Remedying Structural Silicone Glazing

C1489-15: Standard Specification for Lime Putty for Structural Purposes

C1491-14: Standard Specification for Concrete Roof Pavers

C1492-03(2016): Standard Specification for Concrete Roof Tile

C1496-11: Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

C1497-16: Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation

C1498-04a(2016): Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials

C14M-15a: Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)

C150/C150M-17: Standard Specification for Portland Cement

C1501-14: Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

C1503-08(2013): Standard Specification for Silvered Flat Glass Mirror

C1504-16: Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains

C1504M-16: Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)

C1505-15: Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading

C1506-16b: Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

C151/C151M-16: Standard Test Method for Autoclave Expansion of Hydraulic Cement

C1511-15: Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)

C1512-10(2015)e1: Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products

C1513-13: Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

C1515-14: Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing

C1516-05(2017): Standard Practice for Application of Direct-Applied Exterior Finish Systems

C1518-16: Standard Specification for Precured Elastomeric Silicone Joint Sealants

C1519-10(2017): Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

C1520-02(2015)e1: Standard Guide for Paintability of Latex Sealants

C1521-13: Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

C1522-05(2013): Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes

C1523-17: Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

C1524-02a(2010): Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

C1526-08(2014): Standard Specification for Serpentine Dimension Stone

C1527/C1527M-11: Standard Specification for Travertine Dimension Stone

C1528-15: Standard Guide for Selection of Dimension Stone

C1529-06a(2011): Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses

C1530/C1530M-04(2014): Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses

C1531-16: Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index

C1532/C1532M-12: Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction

C1534-17: Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems

C1535-05(2017): Standard Practice for Application of Exterior Insulation and Finish Systems Class PI

C1536-10: Standard Test Method for Measuring the Yield for Aerosol Foam Sealants

C1540-15: Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

C1541-12(2017): Standard Specification for Shielded Transition Couplings Using Flexible Polyvinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings

C1542/C1542M-16a: Standard Test Method for Measuring Length of Concrete Cores

C1543-10a: Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding

C1546-02(2014): Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems

C1549-16: Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

C1550-12a: Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)

C1552-16: Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing

C1556-11a(2016): Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

C1558-16: Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

C1559-15: Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)

C156-17: Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

C1560-03(2016): Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites

C1563-08(2017): Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications

C1564-15: Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

C1565-09: Standard Test Method for Determination of Pack-Set Index of Portland Cement

C1567-13: Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

C1568-08(2013): Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)

C1569-03(2016): Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)

C157/C157M-17: Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

C1570-03(2016): Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)

C1574-04(2013): Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation

C1577-17: Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD

C1579-13: Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)

C1580-15: Standard Test Method for Water-Soluble Sulfate in Soil

C1581/C1581M-16: Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

C1582/C1582M-11(2017)e1: Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

C1583/C1583M-13: Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

C1585-13: Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

C1586-05(2011): Standard Guide for Quality Assurance of Mortars

C1589/C1589M-17b: Standard Practice for Outdoor Weathering of Construction Seals and Sealants

C159-06(2016): Standard Specification for Vitrified Clay Filter Blocks

C1594-11(2017): Standard Specification for Polyimide Rigid Cellular Thermal Insulation

C1600/C1600M-17: Standard Specification for Rapid Hardening Hydraulic Cement

C1601-14a: Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces

C1602/C1602M-12: Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

C1603-16: Standard Test Method for Measurement of Solids in Water

C1604/C1604M-05(2012): Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete

C1608-17: Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste

C1609/C1609M-12: Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

C1610/C1610M-17: Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

C1611/C1611M-14: Standard Test Method for Slump Flow of Self-Consolidating Concrete

C1613-17: Standard Specification for Precast Concrete Grease Interceptor Tanks

C1616-07(2012): Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight

C1617-15: Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

C1618-13: Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure

C1618M-13: Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)

C1619-11(2017): Standard Specification for Elastomeric Seals for Joining Concrete Structures

C1620-16: Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

C1621/C1621M-17: Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

C1622/C1622M-10(2016)e1: Standard Specification for Cold-Weather Admixture Systems

C1623-17a: Standard Specification for Manufactured Concrete Masonry Lintels

C1628-17: Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets

C1629/C1629M-15: Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

C163-05(2016): Standard Practice for Mixing Thermal Insulating Cement Samples

C1630-11(2016): Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

C1634-17: Standard Specification for Concrete Facing Brick

C1635-16: Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

C1639-17: Standard Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation

C1642-14: Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

C1643-14: Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

C1644-06(2017): Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

C1646/C1646M-16: Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete

C1649-14: Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated

C165-07(2012): Standard Test Method for Measuring Compressive Properties of Thermal Insulations

C1650-14: Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated

C1651-11: Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass

C1658/C1658M-13: Standard Specification for Glass Mat Gypsum Panels

C166-05(2016): Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement

C1660-10: Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry

C1666/C1666M-08(2015): Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement

C1667-15: Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels

C1668-13a: Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems

C167-15: Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

C1670/C1670M-17: Standard Specification for Adhered Manufactured Stone Masonry Veneer Units

C1675-17a: Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

C1677-11a(2017): Standard Specification for Joints for Concrete Box, Using Rubber Gaskets

C1679-14: Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry

C1681-14: Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

C1685-15: Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications

C1686-09(2017): Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units

C1688/C1688M-14a: Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete

C1691-11: Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units

C1692-11: Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry

C1693-11(2017): Standard Specification for Autoclaved Aerated Concrete (AAC)

C1694-09(2017): Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements

C1695-10(2015): Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

C1696-16: Standard Guide for Industrial Thermal Insulation Systems

C1697-16: Standard Specification for Blended Supplementary Cementitious Materials

C1698-09(2014): Standard Test Method for Autogenous Strain of Cement Paste and Mortar

C1699-09(2015): Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates

C170/C170M-17: Standard Test Method for Compressive Strength of Dimension Stone

C1701/C1701M-17a: Standard Test Method for Infiltration Rate of In Place Pervious Concrete

C1702-17: Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

C1704/C1704M-09a(2016): Standard Test Method for Sampling and Testing Structural Cementitious Panels

C1705/C1705M-09(2016): Standard Specification for Structural Cementitious Panels

C1707-11: Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

C1708/C1708M-16: Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

C1709-11: Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete

C171-16: Standard Specification for Sheet Materials for Curing Concrete

C1710-16: Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form

C1712-17: Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

C1713-17: Standard Specification for Mortars for the Repair of Historic Masonry

C1714/C1714M-16: Standard Specification for Preblended Dry Mortar Mix for Unit Masonry

C1716/C1716M-16: Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms

C1717-12: Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels

C1719-11(2017): Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill

C172/C172M-17: Standard Practice for Sampling Freshly Mixed Concrete

C1721-15: Standard Guide for Petrographic Examination of Dimension Stone

C1722-11: Standard Guide for Repair and Restoration of Dimension Stone

C1723-16: Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy

C1728-17: Standard Specification for Flexible Aerogel Insulation

C1729-17: Standard Specification for Aluminum Jacketing for Insulation

C1729M-17: Standard Specification for Aluminum Jacketing for Insulation

C173/C173M-16: Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

C1731-16: Standard Specification for Concrete Floor Tile

C1735-17: Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

C1736-11: Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device

C1737-16: Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

C1738/C1738M-14: Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes

C174/C174M-17: Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores

C1740-16: Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

C1741-12: Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout

C1743-12: Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction

C1744-12: Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction

C1745/C1745M-11: Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices

C1746/C1746M-12: Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices

C1747/C1747M-13: Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion

C1749-17a: Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer

C1754/C1754M-12: Standard Test Method for Density and Void Content of Hardened Pervious Concrete

C1756-17: Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs

C1757-13: Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete

C1758/C1758M-15: Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete

C1760-12: Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

C1761/C1761M-17: Standard Specification for Lightweight Aggregate for Internal Curing of Concrete

C1764-12(2016): Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

C1765-16: Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

C1766-15: Standard Specification for Factory-Laminated Gypsum Panel Products

C1767-16a: Standard Specification for Stainless Steel Jacketing for Insulation

C1768/C1768M-12(2017): Standard Practice for Accelerated Curing of Concrete Cylinders

C177-13: Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

C1774-13: Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems

C1775-14: Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications

C1777-15: Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter

C1780-17: Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer

C1781/C1781M-15: Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems

C1784-14: Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

C1785-17: Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing

C1789-14: Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels

C185-15a: Standard Test Method for Air Content of Hydraulic Cement Mortar

C186-15a: Standard Test Method for Heat of Hydration of Hydraulic Cement

C187-16: Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste

C188-16: Standard Test Method for Density of Hydraulic Cement

C191-13: Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

C192/C192M-16a: Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

C195-07(2013): Standard Specification for Mineral Fiber Thermal Insulating Cement

C196-00(2016): Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

C198-09(2013): Standard Test Method for Cold Bonding Strength of Refractory Mortar

C203-05a(2012): Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

C204-16: Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus

C206-14: Standard Specification for Finishing Hydrated Lime

C207-06(2011): Standard Specification for Hydrated Lime for Masonry Purposes

C208-12: Standard Specification for Cellulosic Fiber Insulating Board

C209-15: Standard Test Methods for Cellulosic Fiber Insulating Board

C212-17: Standard Specification for Structural Clay Facing Tile

C215-14: Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens

C216-17a: Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)

C217/C217M-15a: Standard Test Method for Weather Resistance of Slate

C219-14a: Standard Terminology Relating to Hydraulic Cement

C22/C22M-00(2015): Standard Specification for Gypsum

C220-91(2015): Standard Specification for Flat Asbestos-Cement Sheets

C221-98(2014): Standard Specification for Corrugated Asbestos-Cement Sheets

C222-97(2014): Standard Specification for Asbestos-Cement Roofing Shingles

C223-98(2014): Standard Specification for Asbestos-Cement Siding

C226-12: Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

C227-10: Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

C230/C230M-14: Standard Specification for Flow Table for Use in Tests of Hydraulic Cement

C231/C231M-17a: Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

C232/C232M-14: Standard Test Method for Bleeding of Concrete

C233/C233M-14: Standard Test Method for Air-Entraining Admixtures for Concrete

C240-16: Standard Test Methods of Testing Cellular Glass Insulation Block

C241/C241M-15e1: Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic

C260/C260M-10a(2016): Standard Specification for Air-Entraining Admixtures for Concrete

C266-15: Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

C267-01(2012): Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

C270-14a: Standard Specification for Mortar for Unit Masonry

C279-17: Standard Specification for Chemical-Resistant Masonry Units

C28/C28M-10(2015): Standard Specification for Gypsum Plasters

C287-98(2012): Standard Specification for Chemical-Resistant Sulfur Mortar

C29/C29M-17a: Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate

C293/C293M-16: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

C294-12(2017): Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

C295/C295M-12: Standard Guide for Petrographic Examination of Aggregates for Concrete

C296/C296M-00(2015): Standard Specification for Asbestos-Cement Pressure Pipe

C301-13: Standard Test Methods for Vitrified Clay Pipe

C302-13: Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation

C303-10(2016)e1: Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation

C305-14: Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

C307-03(2012): Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

C308-00(2012)e1: Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

C309-11: Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete

C31/C31M-17: Standard Practice for Making and Curing Concrete Test Specimens in the Field

C311/C311M-17: Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

C315-07(2016): Standard Specification for Clay Flue Liners and Chimney Pots

C317/C317M-00(2015): Standard Specification for Gypsum Concrete

C318/C318M-13: Standard Specification for Gypsum Formboard

C32-13: Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)

C321-00(2012): Standard Test Method for Bond Strength of Chemical-Resistant Mortars

C33/C33M-16e1: Standard Specification for Concrete Aggregates

C330/C330M-17a: Standard Specification for Lightweight Aggregates for Structural Concrete

C331/C331M-17: Standard Specification for Lightweight Aggregates for Concrete Masonry Units

C332-17: Standard Specification for Lightweight Aggregates for Insulating Concrete

C335/C335M-17: Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

C34-17: Standard Specification for Structural Clay Loadbearing Wall Tile

C341/C341M-13: Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements

C348-14: Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

C349-14: Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

C35-01(2014): Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster

C356-17: Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

C359-13: Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)

C361-16: Standard Specification for Reinforced Concrete Low-Head Pressure Pipe

C361M-16: Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)

C367/C367M-16: Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels

C384-04(2016): Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method

C386-93(2012): Standard Practice for Use of Chemical-Resistant Sulfur Mortar

C387/C387M-15: Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

C39/C39M-17b: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

C390-08(2013): Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

C395-01(2012): Standard Specification for Chemical-Resistant Resin Mortars

C397-00(2012): Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

C398-98(2012): Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry

C399-98(2012): Standard Practice for Use of Chemical-Resistant Resin Mortars

C4-04(2014): Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile

C40/C40M-16: Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

C403/C403M-16: Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

C404-11: Standard Specification for Aggregates for Masonry Grout

C406/C406M-15: Standard Specification for Roofing Slate

C410-13: Standard Specification for Industrial Floor Brick

C411-11: Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

C412-15: Standard Specification for Concrete Drain Tile

C412M-15: Standard Specification for Concrete Drain Tile (Metric)

C413-01(2012): Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C414-03(2012): Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

C418-12: Standard Test Method for Abrasion Resistance of Concrete by Sandblasting

C419-08(2013): Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings

C42/C42M-16: Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

C421-08(2014): Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation

C423-17: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

C425-04(2013): Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

C426-16: Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units

C428/C428M-05(2011)e1: Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe

C430-08(2015): Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve

C441/C441M-11: Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

C443-12(2017): Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

C443M-11(2017): Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)

C444-17: Standard Specification for Perforated Concrete Pipe

C444M-17: Standard Specification for Perforated Concrete Pipe (Metric)

C447-15: Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations

C449-07(2013): Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

C450-08(2014): Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging

C451-13: Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

C457/C457M-16: Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

C458/C458M-98(2011)e1: Standard Test Method for Organic Fiber Content of Asbestos-Cement Products

C459/C459M-97(2011)e1: Standard Test Methods for Asbestos-Cement Flat Products

C461-17: Standard Test Methods for Mastics and Coatings Used With Thermal Insulation

C465-16: Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

C466-03(2012): Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars

C469/C469M-14: Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression

C470/C470M-15: Standard Specification for Molds for Forming Concrete Test Cylinders Vertically

C471M-17e1: Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

C472-99(2014): Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

C473-16: Standard Test Methods for Physical Testing of Gypsum Panel Products

C474-15: Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

C475/C475M-15: Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

C476-16: Standard Specification for Grout for Masonry

C478-15a: Standard Specification for Circular Precast Reinforced Concrete Manhole Sections

C478M-15a: Standard Specification for Circular Precast Reinforced Concrete Manhole Sections (Metric)

C479-04(2013): Standard Specification for Vitrified Clay Liner Plates

C482-02(2014): Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste

C484-99(2014): Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile

C485-16: Standard Test Method for Measuring Warpage of Ceramic Tile

C488-16: Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

C490/C490M-17: Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

C494/C494M-17: Standard Specification for Chemical Admixtures for Concrete

C495/C495M-12: Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

C496/C496M-17: Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

C497-17: Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile

C497M-17: Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)

C499-09(2014): Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile

C5-10: Standard Specification for Quicklime for Structural Purposes

C500/C500M-07(2011)e1: Standard Test Methods for Asbestos-Cement Pipe

C501-84(2015): Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser

C502-16: Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile

C503/C503M-15: Standard Specification for Marble Dimension Stone

C505-15: Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints

C505M-15: Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)

C506-16b: Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

C506M-16b: Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

C507-16: Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

C507M-16: Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

C508/C508M-00(2015): Standard Specification for Asbestos-Cement Underdrain Pipe

C509-06(2015): Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

C510-16: Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

C511-13: Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

C512/C512M-15: Standard Test Method for Creep of Concrete in Compression

C514-04(2014): Standard Specification for Nails for the Application of Gypsum Board

C516-08(2013)e1: Standard Specification for Vermiculite Loose Fill Thermal Insulation

C518-17: Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

C520-15: Standard Test Methods for Density of Granular Loose Fill Insulations

C522-03(2016): Standard Test Method for Airflow Resistance of Acoustical Materials

C530-13: Standard Specification for Structural Clay Nonloadbearing Screen Tile

C531-00(2012): Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C533-13: Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

C534/C534M-16: Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

C535-16: Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

C541/C541M-98(2011)e1: Standard Specification for Linings for Asbestos-Cement Pipe

C542-05(2017): Standard Specification for Lock-Strip Gaskets

C547-17: Standard Specification for Mineral Fiber Pipe Insulation

C549-06(2012): Standard Specification for Perlite Loose Fill Insulation

C55-17: Standard Specification for Concrete Building Brick

C550-15: Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation

C551/C551M-07(2011)e1: Standard Specification for Asbestos-Cement Fiberboard Insulating Panels

C552-17: Standard Specification for Cellular Glass Thermal Insulation

C553-13: Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

C557-03(2017): Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

C56-13: Standard Specification for Structural Clay Nonloadbearing Tile

C563-17: Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement

C564-14: Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

C566-13: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

C567/C567M-14: Standard Test Method for Determining Density of Structural Lightweight Concrete

C568/C568M-15: Standard Specification for Limestone Dimension Stone

C578-17a: Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

C579-01(2012): Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C580-02(2012): Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C585-10(2016): Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

C586-11: Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)

C587-04(2014): Standard Specification for Gypsum Veneer Plaster

C59/C59M-00(2015): Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

C591-17: Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

C592-16: Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

C593-06(2011): Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

C595/C595M-17: Standard Specification for Blended Hydraulic Cements

C596-09(2017): Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

C597-16: Standard Test Method for Pulse Velocity Through Concrete

C603-14: Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

C609-07(2014): Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile

C61/C61M-00(2015): Standard Specification for Gypsum Keene's Cement

C610-16: Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

C612-14: Standard Specification for Mineral Fiber Block and Board Thermal Insulation

C615/C615M-11: Standard Specification for Granite Dimension Stone

C616/C616M-15: Standard Specification for Quartz-Based Dimension Stone

C617/C617M-15: Standard Practice for Capping Cylindrical Concrete Specimens

C618-17: Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

C62-17: Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)

C627-10e1: Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester

C629/C629M-15: Standard Specification for Slate Dimension Stone

C631-09(2014): Standard Specification for Bonding Compounds for Interior Gypsum Plastering

C634-13e1: Standard Terminology Relating to Building and Environmental Acoustics

C635/C635M-17: Standard Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

C636/C636M-13: Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

C637-14: Standard Specification for Aggregates for Radiation-Shielding Concrete

C638-14: Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete

C639-15: Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

C641-17: Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates

C642-13: Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

C645-14e1: Standard Specification for Nonstructural Steel Framing Members

C647-08(2013): Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

C648-04(2014): Standard Test Method for Breaking Strength of Ceramic Tile

C650-04(2014): Standard Test Method for Resistance of Ceramic Tile to Chemical Substances

C652-17a: Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)

C653-17: Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation

C654-15: Standard Specification for Porous Concrete Pipe

C654M-15: Standard Specification for Porous Concrete Pipe (Metric)

C655-15: Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

C655M-15: Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

C656-17: Standard Specification for Structural Insulating Board, Calcium Silicate

C658-98(2012): Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile

C659-90(2014): Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels

C661-15: Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

C663-98(2014): Standard Specification for Asbestos-Cement Storm Drain Pipe

C665-17: Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

C666/C666M-15: Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing

C667-09(2014): Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air

C668-98(2014): Standard Specification for Asbestos-Cement Transmission Pipe

C67-17: Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

C670-15: Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

C672/C672M-12: Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals

C679-15: Standard Test Method for Tack-Free Time of Elastomeric Sealants

C680-14: Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

C681-14: Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

C685/C685M-14: Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

C686-17: Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation

C687-17: Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

C688-14: Standard Specification for Functional Additions for Use in Hydraulic Cements

C692-13: Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

C70-13: Standard Test Method for Surface Moisture in Fine Aggregate

C700-13: Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

C702/C702M-11: Standard Practice for Reducing Samples of Aggregate to Testing Size

C711-14: Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

C712-14: Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

C716-06(2015): Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

C717-17: Standard Terminology of Building Seals and Sealants

C719-14: Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

C722-04(2012): Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

C723-98(2012): Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile

C725-90(2014): Standard Specification for Semidense Mineral Fiber Siding

C726-17: Standard Specification for Mineral Wool Roof Insulation Board

C727-12: Standard Practice for Installation and Use of Reflective Insulation in Building Constructions

C728-17a: Standard Specification for Perlite Thermal Insulation Board

C73-17: Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)

C731-15: Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

C732-17: Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

C734-15: Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

C736-12(2017): Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

C737-13: Standard Specification for Limestone for Dusting of Coal Mines

C739-17: Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

C740/C740M-13: Standard Guide for Evacuated Reflective Insulation In Cryogenic Service

C744-16: Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units

C746-90(2014): Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading

C754-17: Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

C755-10(2015): Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation

C76-16: Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

C764-17: Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

C765-97(2015): Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

C76M-16: Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

C771-14: Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

C772-03(2014): Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

C778-17: Standard Specification for Standard Sand

C779/C779M-12: Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces

C78/C78M-16: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

C780-17: Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

C782-13: Standard Test Method for Softness of Preformed Tape Sealants

C786/C786M-10(2016): Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods

C792-15: Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

C793-05(2017): Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

C794-15a: Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

C795-08(2013): Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

C796/C796M-12: Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

C800-14: Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)

C802-14: Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

C803/C803M-17: Standard Test Method for Penetration Resistance of Hardened Concrete

C805/C805M-13a: Standard Test Method for Rebound Number of Hardened Concrete

C806-12: Standard Test Method for Restrained Expansion of Expansive Cement Mortar

C807-13: Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle

C821-14: Standard Specification for Lime for Use with Pozzolans

C822-13: Standard Terminology Relating to Concrete Pipe and Related Products

C823/C823M-12(2017): Standard Practice for Examination and Sampling of Hardened Concrete in Constructions

C825-06(2011): Standard Specification for Precast Concrete Barriers

C827/C827M-16: Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

C828-11(2016): Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines

C834-17: Standard Specification for Latex Sealants

C835-06(2013)e1: Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C

C836/C836M-15: Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

C840-17a: Standard Specification for Application and Finishing of Gypsum Board

C841-03(2013): Standard Specification for Installation of Interior Lathing and Furring

C842-05(2015): Standard Specification for Application of Interior Gypsum Plaster

C843-17: Standard Specification for Application of Gypsum Veneer Plaster

C844-15: Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster

C845/C845M-12: Standard Specification for Expansive Hydraulic Cement

C846-16: Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing

C847-14a: Standard Specification for Metal Lath

C856-17: Standard Practice for Petrographic Examination of Hardened Concrete

C857-16: Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures

C858-10e1: Standard Specification for Underground Precast Concrete Utility Structures

C864-05(2015): Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

C869/C869M-11(2016): Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

C87/C87M-17: Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

C870-11(2017): Standard Practice for Conditioning of Thermal Insulating Materials

C871-11e1: Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

C873/C873M-15: Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

C875-98(2014): Standard Specification for Asbestos-Cement Conduit

C876-15: Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete

C877-16: Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections

C877M-16: Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)

C878/C878M-14a: Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete

C879-03(2014): Standard Test Methods for Release Papers Used with Preformed Tape Sealants

C88-13: Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

C880/C880M-15: Standard Test Method for Flexural Strength of Dimension Stone

C881/C881M-15: Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

C882/C882M-13a: Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

C884/C884M-16: Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

C887-13: Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar

C890-13: Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures

C891-11: Standard Practice for Installation of Underground Precast Concrete Utility Structures

C892-10: Standard Specification for High-Temperature Fiber Blanket Thermal Insulation

C895-87(2014): Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile

C896-17: Standard Terminology Relating to Clay Products

C897-15: Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters

C898/C898M-09: Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course

C90-16a: Standard Specification for Loadbearing Concrete Masonry Units

C900-15: Standard Test Method for Pullout Strength of Hardened Concrete

C901-10: Standard Specification for Prefabricated Masonry Panels

C902-15: Standard Specification for Pedestrian and Light Traffic Paving Brick

C904-01(2012): Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials

C905-01(2012): Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C907-17: Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

C908-15: Standard Test Method for Yield Strength of Preformed Tape Sealants

C91/C91M-12: Standard Specification for Masonry Cement

C910-16: Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

C913-16: Standard Specification for Precast Concrete Water and Wastewater Structures

C915-79(2010): Standard Specification for Precast Reinforced Concrete Crib Wall Members

C916-14: Standard Specification for Adhesives for Duct Thermal Insulation

C917-05(2011): Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source

C918/C918M-13: Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength

C919-12(2017): Standard Practice for Use of Sealants in Acoustical Applications

C920-14a: Standard Specification for Elastomeric Joint Sealants

C921-10(2015): Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation

C923-08(2013)e1: Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals

C923M-08b(2013): Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)

C926-17: Standard Specification for Application of Portland Cement-Based Plaster

C928/C928M-13: Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

C929-14: Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel

C930-12: Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories

C932-06(2013): Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

C933-14: Standard Specification for Welded Wire Lath

C935-13: Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast

C936/C936M-16: Standard Specification for Solid Concrete Interlocking Paving Units

C937-16: Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

C938-16: Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

C94/C94M-17a: Standard Specification for Ready-Mixed Concrete

C940-16: Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

C941-16: Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory

C942-15: Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

C943-10: Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

C944/C944M-12: Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

C945-05(2012): Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

C946-10: Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls

C947-03(2016): Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)

C948-81(2016): Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete

C950/C950M-08(2012): Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

C952-12: Standard Test Method for Bond Strength of Mortar to Masonry Units

C953-10: Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory

C954-15: Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

C955-17: Standard Specification for Cold-Formed Steel Structural Framing Members

C956-04(2015): Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete

C957/C957M-17: Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface

C961-15: Standard Test Method for Lap Shear Strength of Sealants

C963-00(2017): Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

C964-07(2012): Standard Guide for Lock-Strip Gasket Glazing

C966-98(2014): Standard Guide for Installing Asbestos-Cement Nonpressure Pipe

C969-17: Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

C969M-17: Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

C97/C97M-15: Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone

C972-00(2011): Standard Test Method for Compression-Recovery of Tape Sealant

C977-10: Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

C979/C979M-16: Standard Specification for Pigments for Integrally Colored Concrete

C980-17: Standard Specification for Industrial Chimney Lining Brick

C981-05(2013): Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks

C985-15: Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe

C985M-15a: Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)

C989/C989M-17: Standard Specification for Slag Cement for Use in Concrete and Mortars

C99/C99M-15: Standard Test Method for Modulus of Rupture of Dimension Stone

C990-09(2014): Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants

C990M-09(2014): Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)

C991-16: Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

D1036-99(2017): Standard Test Methods of Static Tests of Wood Poles

D1037-12: Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

D1038-11: Standard Terminology Relating to Veneer and Plywood

D1061/D1061M-95(2017): Standard Specification for Asbestos Lap

D1073-16: Standard Specification for Fine Aggregate for Asphalt Paving Mixtures

D1074-17: Standard Test Method for Compressive Strength of Asphalt Mixtures

D1075-11: Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures

D1079-16: Standard Terminology Relating to Roofing and Waterproofing

D1101-97a(2013): Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use

D1105-96(2013): Standard Test Method for Preparation of Extractive-Free Wood

D1106-96(2013): Standard Test Method for Acid-Insoluble Lignin in Wood

D1107-96(2013): Standard Test Method for Ethanol-Toluene Solubility of Wood

D1108-96(2013): Standard Test Method for Dichloromethane Solubles in Wood

D1109-84(2013): Standard Test Method for 1 % Sodium Hydroxide Solubility of Wood

D1110-84(2013): Standard Test Methods for Water Solubility of Wood

D1118/D1118M-95(2017): Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles

D1139/D1139M-15: Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments

D1143/D1143M-07(2013): Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

D1155-10(2015): Standard Test Method for Roundness of Glass Spheres

D1166-84(2013): Standard Test Method for Methoxyl Groups in Wood and Related Materials

D1184-98(2012): Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies

D1187/D1187M-97(2011)e1: Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal

D1188-07(2015): Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

D1195/D1195M-09(2015): Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

D1196/D1196M-12(2016): Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

D1214-10(2015)e1: Standard Test Method for Sieve Analysis of Glass Spheres

D1227-13: Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

D1241-15: Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

D1309-93(2015): Standard Test Method for Settling Properties of Traffic Paints During Storage

D1327/D1327M-04(2012)e1: Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

D1369-84(2012): Standard Practice for Quantities of Materials for Bituminous Surface Treatments

D1370/D1370M-12(2016): Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)

D139-16: Standard Test Method for Float Test for Bituminous Materials

D140/D140M-16: Standard Practice for Sampling Asphalt Materials

D1411-09: Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes

D143-14: Standard Test Methods for Small Clear Specimens of Timber

D1436-17: Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes

D1455-17: Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish

D146/D146M-04(2012)e1: Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

D1461-17: Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures

D1494-12: Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

D1554-10(2016): Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials

D1558-10: Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils

D1560-15: Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus

D1561/D1561M-13: Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor

D1571/D1571M-95(2017): Standard Specification for Woven Asbestos Cloth

D1573/D1573M-95(2017): Standard Test Method for Heat Aging of Asbestos Textiles

D1635/D1635M-12: Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading

D1665-98(2014): Standard Test Method for Engler Specific Viscosity of Tar Products

D1666-17: Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials

D1669/D1669M-07(2013)e1: Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings

D1670/D1670M-11: Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials

D173/D173M-03(2011)e1: Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

D1734-93(2013): Standard Practice for Making Cementitious Panels for Testing Coatings

D1751-04(2013)e1: Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

D1752-04a(2013): Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

D1754/D1754M-09(2014): Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

D1761-12: Standard Test Methods for Mechanical Fasteners in Wood

D1762-84(2013): Standard Test Method for Chemical Analysis of Wood Charcoal

D1779-98(2017): Standard Specification for Adhesive for Acoustical Materials

D1791-93(2015): Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes

D1792-17: Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes

D1793-17: Standard Test Method for Water Spotting of Emulsion Floor Polishes

D1856-09(2015): Standard Test Method for Recovery of Asphalt From Solution by Abson Method

D1863/D1863M-05(2011)e1: Standard Specification for Mineral Aggregate Used on Built-Up Roofs

D1864/D1864M-89(2017): Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs

D1865/D1865M-09(2017): Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs

D1869-15: Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe

D1883-16: Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils

D1918/D1918M-95(2017): Standard Test Method for Asbestos Content of Asbestos Textiles

D1970/D1970M-17: Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

D198-15: Standard Test Methods of Static Tests of Lumber in Structural Sizes

D1985-13: Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

D1990-16: Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens

D1995-92(2017): Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)

D20-03(2014): Standard Test Method for Distillation of Road Tars

D2026/D2026M-15: Standard Specification for Cutback Asphalt (Slow-Curing Type)

D2027/D2027M-13: Standard Specification for Cutback Asphalt (Medium-Curing Type)

D2028/D2028M-15: Standard Specification for Cutback Asphalt (Rapid-Curing Type)

D2041/D2041M-11: Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

D2042-15: Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

D2047-11: Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

D2048-17: Standard Test Method for Powdering of Floor Polish Films

D2100/D2100M-95(2017): Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes

D2166/D2166M-16: Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

D2167-15: Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

D2170/D2170M-10: Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

D2171/D2171M-10: Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

D2172/D2172M-17: Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures

D2178/D2178M-15a: Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

D2202-00(2014): Standard Test Method for Slump of Sealants

D2203-01(2011): Standard Test Method for Staining from Sealants

D2205-15: Standard Guide for Selection of Tests for Traffic Paints

D226/D226M-17: Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

D227/D227M-03(2011)e1: Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

D228/D228M-16: Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

D2321-14e1: Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

D2339-98(2017): Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading

D2377-14: Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

D2394-17: Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring

D2395-17: Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials

D2397/D2397M-17: Standard Specification for Cationic Emulsified Asphalt

D2399-12(2017)e1: Standard Practice for Selection of Cutback Asphalts

D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

D242/D242M-09(2014): Standard Specification for Mineral Filler For Bituminous Paving Mixtures

D2435/D2435M-11: Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

D244-09(2017): Standard Test Methods and Practices for Emulsified Asphalts

D245-06(2011): Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber

D2452-15: Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

D2453-15: Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

D2489/D2489M-16: Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures

D2493/D2493M-16: Standard Practice for Viscosity-Temperature Chart for Asphalt Binders

D25-12(2017): Standard Specification for Round Timber Piles

D2521/D2521M-76(2014)e1: Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining

D2523-13: Standard Practice for Testing Load-Strain Properties of Roofing Membranes

D2555-17a: Standard Practice for Establishing Clear Wood Strength Values

D2559-12ae1: Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

D2589/D2589M-88(2011)e1: Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber

D2590/D2590M-98(2011)e1: Standard Test Method for Sampling Chrysotile Asbestos

D2626/D2626M-04(2012)e1: Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

D2628-91(2016): Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

D2643/D2643M-08(2013)e1: Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)

D2661-14: Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

D2665-14: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

D2680-01(2014): Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

D2718-00(2011)e1: Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)

D2719-13: Standard Test Methods for Structural Panels in Shear Through-the-Thickness

D2726/D2726M-17: Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures

D2728-98(2014): Standard Practice for Paving Uses and Application Temperatures for Road Tars

D2729-11: Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

D2746-07(2013): Standard Test Method for Staining Tendency of Asphalt (Stain Index)

D2752/D2752M-88(2011)e1: Standard Test Methods for Air Permeability of Asbestos Fibers

D2792-17: Standard Practice for Solvent and Fuel Resistance of Traffic Paint

D2793-99(2017): Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates

D2824/D2824M-13: Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos

D2829-07(2013): Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems

D2834-95(2015): Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes

D2835-89(2017): Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

D2844/D2844M-13: Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

D2850-15: Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

D2852-16: Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings

D2859-16: Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

D2872-12e1: Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

D2898-10(2017): Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

D2899-12(2017): Standard Practice for Establishing Allowable Stresses for Round Timber Piles

D2915-17: Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products

D2937-17e1: Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

D2940/D2940M-15: Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

D2946-01(2010): Standard Terminology for Asbestos and Asbestos-Cement Products

D2947/D2947M-88(2011)e1: Standard Test Method for Screen Analysis of Asbestos Fibers

D2949-10: Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

D2950/D2950M-14: Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

D2985/D2985M-92(2011)e1: Standard Test Method for Color of Asbestos

D2987/D2987M-88(2011)e1: Standard Test Method for Moisture Content of Asbestos Fiber

D299/D299M-04(2017): Standard Specification for Asbestos Yarns

D2995-14: Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors

D3018/D3018M-11: Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules

D3034-16: Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

D3042-17: Standard Test Method for Insoluble Residue in Carbonate Aggregates

D3043-00(2011): Standard Test Methods for Structural Panels in Flexure

D3044-16: Standard Test Method for Shear Modulus of Wood-Based Structural Panels

D3052-17: Standard Practice for Rating Water-Emulsion Floor Polishes

D3080/D3080M-11: Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions

D3105-17: Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials

D3141/D3141M-15: Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

D3142/D3142M-11: Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

D3143/D3143M-13: Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

D315/D315M-95(2017): Standard Specification for Woven Asbestos Tape

D3153-17: Standard Test Method for Recoatability of Water-Emulsion Floor Polishes

D3155-11: Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures

D3161/D3161M-16a: Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)

D3200-74(2017): Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles

D3201/D3201M-13: Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products

D3203/D3203M-17: Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures

D3206-17: Standard Test Method for Soil Resistance of Floor Polishes

D3207-17: Standard Test Method for Detergent Resistance of Floor Polish Films

D3209-93(2015): Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes

D3210-95(2016): Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes

D3212-07(2013): Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

D3262-16: Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

D3279-12e1: Standard Test Method for n-Heptane Insolubles

D3282-15: Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

D3289-17: Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)

D3311-17: Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

D3319-11(2017): Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel

D3345-17: Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites

D3381/D3381M-13: Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

D3387-11: Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)

D3423/D3423M-15: Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)

D3430-95(2016): Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes

D3434-00(2013): Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

D3440-13: Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes

D345-02(2010): Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications

D3462/D3462M-16: Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

D3468/D3468M-99(2013)e1: Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

D3498-03(2011): Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

D3499-11: Standard Test Method for Toughness of Wood-Based Structural Panels

D3500-14: Standard Test Methods for Structural Panels in Tension

D3501-05a(2011): Standard Test Methods for Wood-Based Structural Panels in Compression

D3535-07a(2013): Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions

D3542-08(2013): Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

D3549/D3549M-17: Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens

D3564-95(2015): Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring

D36/D36M-14e1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

D3625/D3625M-12: Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water

D3628-15: Standard Practice for Selection and Use of Emulsified Asphalts

D3632-98(2011): Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method

D3633/D3633M-12: Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

D3639/D3639M-92(2011)e1: Standard Test Method for Classification of Asbestos by Quebec Standard Test

D3665-12(2017): Standard Practice for Random Sampling of Construction Materials

D3666-16: Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

D3678-14: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

D3679-17: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

D3689/D3689M-07(2013)e1: Standard Test Methods for Deep Foundations Under Static Axial Tensile Load

D3716-14: Standard Test Methods for Use of Emulsion Polymers in Floor Polishes

D3737-12: Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

D3740-12a: Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

D3744/D3744M-11a: Standard Test Method for Aggregate Durability Index

D375/D375M-95(2017): Standard Specification for Asbestos Roving

D3752-98(2011): Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix

D3754-14: Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

D3757-16: Standard Guide for Preparing Specifications for Solvent-based Floor Polishes

D3791/D3791M-11: Standard Practice for Evaluating the Effects of Heat on Asphalts

D3805/D3805M-16: Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings

D3841-16: Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

D3880/D3880M-90(2017): Standard Test Method for Asbestos Strength Units

D3909/D3909M-14: Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

D3910-15: Standard Practices for Design, Testing, and Construction of Slurry Seal

D3930-08(2015): Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes

D3931-08(2015): Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading

D3957-09(2015): Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings

D3963/D3963M-15: Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

D3966/D3966M-07(2013)e1: Standard Test Methods for Deep Foundations Under Lateral Load

D3983-98(2011): Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

D4-86(2010): Standard Test Method for Bitumen Content

D4014-03(2012): Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

D4015-15e1: Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices

D4016-14: Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method)

D4027-98(2011): Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test

D4068-17: Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

D4070-15: Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

D4071-84(2016): Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

D4073-06(2013): Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes

D4074/D4074M-11(2015): Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples

D4078-02(2015): Standard Specification for Water Emulsion Floor Polish

D4095-97(2014): Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes

D41/D41M-11(2016): Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing

D4103-17: Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing

D4124-09: Standard Test Method for Separation of Asphalt into Four Fractions

D4125/D4125M-10(2016): Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method

D4186/D4186M-12e1: Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading

D4215-07(2013): Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

D4216-13: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

D4223/D4223M-12: Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils

D4226-16: Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

D4227-05(2017): Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces

D4258-05(2017): Standard Practice for Surface Cleaning Concrete for Coating

D4259-88(2012): Standard Practice for Abrading Concrete

D4260-05(2017): Standard Practice for Liquid and Gelled Acid Etching of Concrete

D4261-05(2012): Standard Practice for Surface Cleaning Concrete Masonry Units for Coating

D4262-05(2012): Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces

D4263-83(2012): Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method

D4280-15: Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

D43/D43M-00(2012)e1: Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing

D4311/D4311M-15: Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

D4320/D4320M-09: Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters

D4383-12: Standard Specification for Plowable, Raised Retroreflective Pavement Markers

D4386-95(2016): Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring

D4397-16: Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

D4402/D4402M-15: Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer

D4403-12: Standard Practice for Extensometers Used in Rock

D4428/D4428M-14: Standard Test Methods for Crosshole Seismic Testing

D4429-09a: Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

D4434/D4434M-15: Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

D4439-17: Standard Terminology for Geosynthetics

D4442-16: Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials

D4444-13: Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters

D4445-10(2015): Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)

D4469-17: Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures

D4477-16: Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

D4479/D4479M-07(2012)e1: Standard Specification for Asphalt Roof Coatings - Asbestos-Free

D448-12(2017): Standard Classification for Sizes of Aggregate for Road and Bridge Construction

D449/D449M-03(2014)e1: Standard Specification for Asphalt Used in Dampproofing and Waterproofing

D4495-16: Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

D450/D450M-07(2013)e1: Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

D4502-92(2011): Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints

D4505-12(2017): Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life

D451/D451M-91(2013)e1: Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products

D452/D452M-91(2013)e1: Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products

D4546-14: Standard Test Methods for One-Dimensional Swell or Collapse of Soils

D4551-12: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

D4552/D4552M-10(2016)e1: Standard Practice for Classifying Hot-Mix Recycling Agents

D4561-11: Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

D4580/D4580M-12: Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding

D4586/D4586M-07(2012)e1: Standard Specification for Asphalt Roof Cement, Asbestos-Free

D4592-12(2017): Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life

D4601/D4601M-04(2012)e1: Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

D4637/D4637M-15: Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

D4648/D4648M-16: Standard Test Methods for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil

D4726-15: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

D4756-15: Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

D4761-13: Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material

D4767-11: Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

D4787-13: Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

D4788-03(2013): Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography

D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

D4792/D4792M-13: Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

D4796-17: Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials

D4797-12a: Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking

D4798/D4798M-11(2016): Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

D4799/D4799M-17: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

D4803-10: Standard Test Method for Predicting Heat Buildup in PVC Building Products

D4811/D4811M-16: Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

D4829-11: Standard Test Method for Expansion Index of Soils

D4832-16: Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

D4851-07(2015): Standard Test Methods for Coated and Laminated Fabrics for Architectural Use

D4866/D4866M-88(2017): Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures

D4867/D4867M-09(2014): Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

D4869/D4869M-16a: Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

D4887/D4887M-11(2016): Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials

D4897/D4897M-16: Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

D490-92(2016): Standard Specification for Road Tar

D4932/D4932M-89(2014)e1: Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles

D4933-16: Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials

D4945-12: Standard Test Method for High-Strain Dynamic Testing of Deep Foundations

D4956-17: Standard Specification for Retroreflective Sheeting for Traffic Control

D4960-08(2013): Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials

D4977/D4977M-03(2013)e1: Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion

D4989/D4989M-90a(2014)e1: Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer

D4990-97a(2013): Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing

D5/D5M-13: Standard Test Method for Penetration of Bituminous Materials

D5030/D5030M-13a: Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

D5055-16: Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

D5076/D5076M-13: Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes

D5078/D5078M-11(2016): Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

D5080-17: Standard Test Method for Rapid Determination of Percent Compaction

D5081/D5081M-90(2011)e1: Standard Test Method for Aggregate Layer Hiding Power

D5095-91(2013): Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

D5100/D5100M-95a(2010)e1: Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

D5102-09: Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

D5106-15: Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

D5107-03(2013): Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone

D5124-96(2013): Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation

D5147/D5147M-14: Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

D5148-10: Standard Test Method for Centrifuge Kerosine Equivalent

D5167-13: Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

D517-98(2015): Standard Specification for Asphalt Plank

D5195-14: Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

D5206-13: Standard Test Method for Windload Resistance of Rigid Plastic Siding

D5215-93(2012): Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

D5235-14: Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products

D5239-12: Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

D5249-10(2016): Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

D5266-13: Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

D5311/D5311M-13: Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil

D5319-17: Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements

D5340-12: Standard Test Method for Airport Pavement Condition Index Surveys

D5360-15: Standard Practice for Design and Construction of Bituminous Surface Treatments

D5361/D5361M-16: Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing

D5370-14: Standard Specification for Pozzolanic Blended Materials in Construction Applications

D5404/D5404M-12(2017): Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

D5405/D5405M-98(2015): Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

D5434-12: Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

D5438-17: Standard Practice for Collection of Floor Dust for Chemical Analysis

D5444-15: Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

D545-14: Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

D5456-17e1: Standard Specification for Evaluation of Structural Composite Lumber Products

D5457-15: Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design

D546-17: Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures

D5469/D5469M-12: Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

D5505-14: Standard Practice for Classifying Emulsified Recycling Agents

D5516-17: Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures

D5572-95(2012): Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

D5574-94(2012): Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints

D558-11: Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

D5581-07a(2013): Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

D5582-14: Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator

D5602/D5602M-11: Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens

D5624-13: Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications

D5635/D5635M-11: Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

D5636/D5636M-94(2017): Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials

D5643/D5643M-06(2012)e1: Standard Specification for Coal Tar Roof Cement, Asbestos Free

D5651-13: Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials

D5652-15: Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products

D5664-17: Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

D5678-17: Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

D5683/D5683M-95(2017): Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

D5703-95(2013): Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry

D5710/D5710M-15: Standard Specification for Trinidad Lake Modified Asphalt

D5726-98(2013): Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing

D5727/D5727M-00(2017): Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)

D5746-98(2016): Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities

D5751-99(2012): Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

D5764-97a(2013): Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products

D5780-10: Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load

D5791-95(2017): Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings

D5795-16: Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus

D5801-17: Standard Test Method for Toughness and Tenacity of Asphalt Materials

D5813-04(2012): Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

D5821-13(2017): Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

D5824-98(2017): Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

D5849/D5849M-07(2013)e1: Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)

D5860-95(2013): Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens

D5869-07a(2013): Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials

D5882-16: Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

D5893/D5893M-16: Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

D5898/D5898M-96(2013): Standard Guide for Standard Details for Adhered Sheet Waterproofing

D5926-15: Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

D5933-96(2013): Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions

D5957-98(2013): Standard Guide for Flood Testing Horizontal Waterproofing Installations

D5971/D5971M-16: Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material

D5973-97(2017): Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

D5977-15: Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

D5982-15: Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)

D6/D6M-95(2011)e1: Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds

D6004-04(2011): Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

D6007-14: Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber

D6023-16: Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)

D6084/D6084M-13: Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

D6087-08(2015)e1: Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

D6088-06(2016): Standard Practice for Installation of Geocomposite Pavement Drains

D6114/D6114M-09: Standard Specification for Asphalt-Rubber Binder

D6134-07(2013): Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems

D6136/D6136M-15: Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method

D6140-00(2014): Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications

D6152/D6152M-12: Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

D6153-15: Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

D6154-15: Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

D6155-15: Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

D6164/D6164M-16: Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

D6205-12: Standard Practice for Calibration of the James Static Coefficient of Friction Machine

D6222/D6222M-16: Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements

D6223/D6223M-16: Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

D6225/D6225M-98(2012)e1: Standard Test Method for Granule Cover of Mineral Surfaced Roofing

D6236-11: Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil

D6237-09(2015): Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

D6244-06(2011): Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains

D6270-08(2012): Standard Practice for Use of Scrap Tires in Civil Engineering Applications

D628/D628M-95(2017): Standard Specification for Asbestos Tubular Sleeving

D6294/D6294M-13: Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

D6297-13: Standard Specification for Asphaltic Plug Joints for Bridges

D6305-08(2015)e1: Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing

D6307-16: Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method

D632-12: Standard Specification for Sodium Chloride

D6325-98(2011): Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives

D633-11(2016): Standard Volume Correction Table for Road Tar

D6330-98(2014): Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions

D6356/D6356M-98(2011)e1: Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing

D6372-15: Standard Practice for Design, Testing, and Construction of Microsurfacing

D6373-16: Standard Specification for Performance Graded Asphalt Binder

D6380/D6380M-03(2013)e1: Standard Specification for Asphalt Roll Roofing (Organic Felt)

D6381/D6381M-15: Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

D6382/D6382M-99(2017): Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

D6383/D6383M-99(2015): Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

D6390-11(2017): Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

D6391-11: Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

D6433-16: Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

D6449-99(2015): Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

D6464-03a(2017): Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing

D6467-13: Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

D6475-17: Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets

D6489-99(2012): Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating

D6490-99(2014): Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels

D6506-01(2009): Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing

D6509/D6509M-16: Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements

D6511/D6511M-06(2011)e1: Standard Test Methods for Solvent Bearing Bituminous Compounds

D6513-14: Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests

D6521-13: Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

D6528-17: Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils

D6532-00(2014): Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

D6555-03(2014): Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies

D6570-04(2010): Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber

D6598-11: Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations

D6599-00(2014)e1: Standard Practice for Construction of Live Fascines on Slopes

D6608-12: Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

D6622-01(2009): Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems

D6626-15: Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder

D6627/D6627M-11(2016): Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

D6628-16: Standard Specification for Color of Pavement Marking Materials

D6643-01(2016): Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance

D6648-08(2016): Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

D6662-17: Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

D6684-04(2010): Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems

D6690-15: Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

D6694/D6694M-15: Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems

D6703-14: Standard Test Method for Automated Heithaus Titrimetry

D6704-08(2015): Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

D6705/D6705M-04(2011)e1: Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems

D6711-15: Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses

D6723-12: Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

D6752/D6752M-17: Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

D6753/D6753M-02(2016): Standard Specification for Coal Tar Adhesive

D6754/D6754M-15: Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

D6760-16: Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

D6765-13: Standard Practice for Live Staking

D6769/D6769M-02(2010)e1: Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems

D6777-16: Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding

D6782-13: Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters

D6783-05(2011): Standard Specification for Polymer Concrete Pipe

D6805-02(2016): Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions

D6815-09(2015): Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

D6816-11(2016): Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

D6827-02(2016): Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)

D6841-16: Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber

D6857/D6857M-17: Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method

D6864-11: Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products

D6874-12: Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration

D6878/D6878M-17: Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

D6884-03(2015)e1: Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems

D6900-10(2015): Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

D6904-03(2013): Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

D6910/D6910M-09: Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

D6916-06c(2011): Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)

D6917-16: Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)

D6918-09(2014)e1: Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition

D692/D692M-15: Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures

D6924-03(2017): Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

D6925-15: Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor

D6926-16: Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus

D6927-15: Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures

D6928-17: Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

D6929-16: Standard Practice to Evaluate the Effect of Freezing on Emulsified Asphalts

D6930-10: Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

D6931-17: Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures

D6932/D6932M-08(2013): Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures

D6933-13: Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

D6934-08(2016): Standard Test Method for Residue by Evaporation of Emulsified Asphalt

D6935-17: Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

D6936-17: Standard Test Method for Determining Demulsibility of Emulsified Asphalt

D6937-16: Standard Test Method for Determining Density of Emulsified Asphalt

D6945/D6945M-03(2017): Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)

D6946/D6946M-13e1: Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)

D6947/D6947M-16: Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System

D6948/D6948M-03(2017): Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)

D6951/D6951M-09(2015): Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

D6958-03(2014): Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings

D6995-05(2013): Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)

D6997-12: Standard Test Method for Distillation of Emulsified Asphalt

D6998-11: Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

D6999-12: Standard Practice for Miscibility of Emulsified Asphalts

D70-09e1: Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

D7000-11(2017): Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

D7001-06(2011): Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications

D7031-11: Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

D7032-17: Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails

D7033-14: Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels

D7051-05(2013): Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface

D7053/D7053M-17: Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs

D7063/D7063M-17: Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples

D7064/D7064M-08(2013): Standard Practice for Open-Graded Friction Course (OGFC) Mix Design

D7082-15: Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

D7088-17: Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

D7089-06(2014): Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing

D7101-13: Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions

D7105-06(2013): Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems

D711-10(2015): Standard Test Method for No-Pick-Up Time of Traffic Paint

D7113/D7113M-10(2016): Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

D7115-10(2015): Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

D7119/D7119M-13a: Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing

D7120/D7120M-10(2017): Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application

D713-12: Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials

D7147-11: Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers

D7158/D7158M-17: Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)

D7172-14: Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared

D7173-14: Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

D7174-05(2016): Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

D7175-15: Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

D7181-11: Method for Consolidated Drained Triaxial Compression Test for Soils

D7186-14: Standard Practice for Quality Assurance Observation of Roof Construction and Repair

D7196-16: Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples

D7199-07(2012): Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models

D7205/D7205M-06(2016): Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars

D7208-14: Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

D7226-13(2017): Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

D7227/D7227M-17: Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus

D7229-08(2013)e1: Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

D7234-12: Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

D7239-13: Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications

D7247-16: Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures

D7251-11: Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products

D7254-17: Standard Specification for Polypropylene (PP) Siding

D7258-17: Standard Specification for Polymeric Piles

D7276-16: Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow

D7277-16: Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow

D7281-07(2013): Standard Test Method for Determining Water Migration Resistance Through Roof Membranes

D7290-06(2017): Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

D7297-14: Standard Practice for Evaluating Residential Indoor Air Quality Concerns

D7307-06(2016): Standard Practice for Sampling of Thermoplastic Traffic Marking Materials

D7308-17: Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials

D7312-10: Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

D7313-13: Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry

D7337/D7337M-12: Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars

D7338-14: Standard Guide for Assessment Of Fungal Growth in Buildings

D7341-14: Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing

D7349/D7349M-15: Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners

D7357-07(2012): Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete

D7369-11: Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test

D7374-08(2015): Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber

D7377-09(2013): Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet

D7381-07(2013): Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material

D7383-10: Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations

D7400-14: Standard Test Methods for Downhole Seismic Testing

D7402-09(2017): Standard Practice for Identifying Cationic Emulsified Asphalts

D7403-09(2017): Standard Test Method for Determination of Residue of Emulsified Asphalt by Low-Temperature Vacuum Distillation

D7404-07(2016): Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer

D7405-15: Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

D7406-07(2012): Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products

D7425/D7425M-13: Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

D7428-15: Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

D7433-13: Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels

D7438-13: Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters

D7445-17: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

D7446-09(2017): Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials

D7460-10: Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending

D7469-16: Standard Test Methods for End-Joints in Structural Wood Products

D7470-08(2015): Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs

D7492/D7492M-16a: Standard Guide for Use of Drainage System Media with Waterproofing Systems

D7495-12: Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials

D7496-17: Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

D7497-09(2016): Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique

D75/D75M-14: Standard Practice for Sampling Aggregates

D7505/D7505M-17: Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

D7508/D7508M-10(2015): Standard Specification for Polyolefin Chopped Strands for Use in Concrete

D7519-11: Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting

D7522/D7522M-15: Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate

D7530/D7530M-17: Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

D7532-09(2016): Standard Practice for Determination of Re-tack Ability of Carpet Adhesives

D7538-09(2013): Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

D7539-10(2015): Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

D7552-09(2014): Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

D7553-15: Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

D7564/D7564M-16: Standard Practice for Construction of Asphalt-Rubber Cape Seal

D7565/D7565M-10(2017): Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures

D7568-17: Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications

D7585/D7585M-10(2015): Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

D7586/D7586M-11: Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies

D7608-10: Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces

D7612-10(2015): Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources

D7616/D7616M-11(2017): Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures

D7617/D7617M-11(2017): Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars

D7635/D7635M-10: Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

D7636/D7636M-11: Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems

D7643-16: Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

D7654/D7654M-10: Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer

D7655/D7655M-12: Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems

D7672-14: Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies

D7681-11(2016): Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

D7682-17: Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

D7698-11a: Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

D7705/D7705M-12: Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction

D7735-17: Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures

D7741/D7741M-11(2017): Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer

D7746-11(2016): Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests

D7760-12: Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter

D7762-11: Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash

D7764-12: Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers

D7765-12: Standard Practice for Use of Foundry Sand in Structural Fill and Embankments

D7770-12: Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method

D7793-17: Standard Specification for Insulated Vinyl Siding

D7799-12a: Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings

D7855/D7855M-13: Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation

D7856-15a: Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space

D7870/D7870M-13: Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure

D7888-13: Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings

D7893-13: Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products

D7906-14: Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator

D8-17c: Standard Terminology Relating to Materials for Roads and Pavements

D806-11: Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

D868-10(2015): Standard Practice for Determination of Degree of Bleeding of Traffic Paint

D88-07(2013): Standard Test Method for Saybolt Viscosity

D906-98(2017): Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading

D913-15: Standard Practice for Evaluating Degree of Traffic Marking Line Wear

D946/D946M-15: Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction

D977-17: Standard Specification for Emulsified Asphalt

D979/D979M-15: Standard Practice for Sampling Bituminous Paving Mixtures

D994/D994M-11(2016): Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

E1007-16: Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

E1014-12: Standard Guide for Measurement of Outdoor A-Weighted Sound Levels

E102/E102M-93(2016): Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures

E1042-02(2014): Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray

E1050-12: Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System

E1056-13: Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings

E1057-15: Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems

E1074-15: Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems

E108-17: Standard Test Methods for Fire Tests of Roof Coverings

E1091-13: Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels

E1105-15: Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

E1110-06(2011): Standard Classification for Determination of Articulation Class

E1121-15: Standard Practice for Measuring Payback for Investments in Buildings and Building Systems

E1124-10(2016): Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method

E1130-16: Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index

E1155-14: Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

E1155M-14: Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric)

E1166-00(2015): Standard Guide for Network Level Pavement Management

E1170-97(2017): Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

E1179-13: Standard Specification for Sound Sources Used for Testing Open Office Components and Systems

E1185-15: Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems

E1186-17: Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems

E119-16a: Standard Test Methods for Fire Tests of Building Construction and Materials

E1190-11: Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members

E1222-90(2016): Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems

E1233/E1233M-14: Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

E1258-88(2012): Standard Test Method for Airflow Calibration of Fan Pressurization Devices

E1264-14: Standard Classification for Acoustical Ceiling Products

E1265-04(2013): Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers

E1266-12: Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications

E1289-08(2016): Standard Specification for Reference Specimen for Sound Transmission Loss

E1300-16: Standard Practice for Determining Load Resistance of Glass in Buildings

E1307-10: Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels

E1332-16: Standard Classification for Rating Outdoor-Indoor Sound Attenuation

E1333-14: Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

E1369-15: Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems

E1374-06(2011): Standard Guide for Open Office Acoustics and Applicable ASTM Standards

E1399/E1399M-97(2017): Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

E1414/E1414M-16: Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

E1423-14: Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

E1424-91(2016): Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

E1425-14: Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

E1480-92(2013): Standard Terminology of Facility Management (Building-Related)

E1481-00a(2014)e1: Standard Terminology of Railing Systems and Rails for Buildings

E1486-14: Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria

E1486M-14: Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)

E1503-14: Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System

E1509-12(2017): Standard Specification for Room Heaters, Pellet Fuel-Burning Type

E1512-01(2015): Standard Test Methods for Testing Bond Performance of Bonded Anchors

E1514-98(2011): Standard Specification for Structural Standing Seam Steel Roof Panel Systems

E1529-16: Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies

E154/E154M-08a(2013)e1: Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

E1554/E1554M-13: Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization

E1555-12: Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair

E1556-12: Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair

E1557-09(2015): Standard Classification for Building Elements and Related Sitework—UNIFORMAT II

E1573-09: Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels

E1574-98(2014): Standard Test Method for Measurement of Sound in Residential Spaces

E1592-05(2017): Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

E1602-03(2017): Standard Guide for Construction of Solid Fuel Burning Masonry Heaters

E1605-04(2012): Standard Terminology Relating to Lead in Buildings

E1612/E1612M-94(2017): Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

E1613-12: Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

E1637-98(2011): Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems

E1643-11(2017): Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

E1644-17: Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

E1645-16: Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

E1646-95(2011): Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference

E1656/E1656M-11(2016): Standard Guide for Classification of Automated Pavement Condition Survey Equipment

E1660-95a(2012): Standard Classification for Serviceability of an Office Facility for Support for Office Work

E1661-95a(2012): Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness

E1662-95a(2012): Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment

E1663-03(2010): Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology

E1664-95a(2012): Standard Classification for Serviceability of an Office Facility for Layout and Building Factors

E1665-95a(2012): Standard Classification for Serviceability of an Office Facility for Facility Protection

E1666-95a(2012): Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions

E1667-95a(2012): Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants

E1668-95a(2012): Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff

E1669-95a(2012): Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding

E1670-95a(2012): Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance

E1671-95a(2012): Standard Classification for Serviceability of an Office Facility for Cleanliness

E1677-11: Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls

E1679-13: Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed

E1680-16: Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems

E1686-16: Standard Guide for Applying Environmental Noise Measurement Methods and Criteria

E1692-95a(2012): Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants

E1693-95(2012): Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets

E1694-95a(2012): Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies

E1699-14: Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes

E1700-16: Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope

E1701-95(2012): Standard Classification for Serviceability of an Office Facility for Manageability

E1704-95(2010): Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures

E1710-11: Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer

E1726-16: Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis

E1728-16: Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

E1730-15: Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores

E1740-15: Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter

E1745-17: Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

E1748-95(2017): Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System

E1749-10: Standard Terminology Relating to Rigid Wall Relocatable Shelters

E1753-13: Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films

E1765-16: Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes

E1773-10: Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

E1775-16: Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead

E1777-09(2015): Standard Guide for Prioritization of Data Needs for Pavement Management

E1778-98a(2015): Standard Terminology Relating to Pavement Distress

E1780-12: Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source

E1783/E1783M-96(2017): Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

E1792-03(2016): Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

E1793-11: Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters

E1794-13: Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels

E1795-17: Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E1796-03(2016): Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E1797-12(2017)e1: Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E1800-13: Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels

E1801-15: Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters

E1803-14: Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels

E1804-16: Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project

E1825-17: Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems

E1826-12: Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded

E1827-11(2017): Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

E1836/E1836M-09(2016): Standard Practice for Building Floor Area Measurements for Facility Management

E1851-15: Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures

E1857-97(2013)e1: Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces

E1886-13a: Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

E1889-97(2015): Standard Guide for Pavement Management Implementation

E1908-16: Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

E1911-09ae1: Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

E1918-16: Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field

E1925-10: Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures

E1946-12: Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects

E196-06(2012): Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

E1960-07(2015): Standard Practice for Calculating International Friction Index of a Pavement Surface

E1971-05(2011): Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings

E1974-11: Standard Specification for Shelter, Electrical Equipment S-250/G

E1975-15: Standard Specification for Shelter, Electrical, Equipment S-280/G

E1976-11: Standard Specification for Shelter, Tactical, Nonexpandable

E1977-11: Standard Specification for Shelter, Tactical, Expandable, One-Side

E1978-11: Standard Specification for Shelter, Tactical, Expandable, Two-Side

E1979-17: Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead

E1980-11: Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces

E1993/E1993M-98(2013)e1: Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs

E1996-17: Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

E1998-11: Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances

E2004-10: Standard Test Method for Facing Cleavage of Sandwich Panels

E2013-12: Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study

E2026-16a: Standard Guide for Seismic Risk Assessment of Buildings

E2029-11: Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution

E2034-99(2017): Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

E2068-00(2016): Standard Test Method for Determination of Operating Force of Sliding Windows and Doors

E2083-05(2016): Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit

E2098/E2098M-13: Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution

E2099-00(2014)e1: Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems

E2100-04(2015): Standard Practice for Calculating the International Runway Friction Index

E2103/E2103M-13: Standard Classification for Bridge Elements—UNIFORMAT II

E2110-17: Standard Terminology for Exterior Insulation and Finish Systems (EIFS)

E2112-07(2016): Standard Practice for Installation of Exterior Windows, Doors and Skylights

E2114-17: Standard Terminology for Sustainability Relative to the Performance of Buildings

E2115-15: Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities

E2120-10(2016): Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films

E2121-13: Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings

E2126-11: Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings

E2127-01A(2015)e1: Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction

E2128-12: Standard Guide for Evaluating Water Leakage of Building Walls

E2129-10: Standard Practice for Data Collection for Sustainability Assessment of Building Products

E2136-04(2013): Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability

E2140-01(2017): Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

E2141-14: Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units

E2150-17: Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure

E2151-02(2010): Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings

E2156-04(2013): Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings

E2166-16: Standard Practice for Organizing and Managing Building Data

E2168-10(2016): Standard Classification for Allowance, Contingency, and Reserve Sums in Building Construction Estimating

E2174-14b: Standard Practice for On-Site Inspection of Installed Firestops

E2177-11: Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness

E2178-13: Standard Test Method for Air Permeance of Building Materials

E2179-03(2016): Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors

E2188-10: Standard Test Method for Insulating Glass Unit Performance

E2189-10e1: Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units

E2190-10: Standard Specification for Insulating Glass Unit Performance and Evaluation

E2203-14: Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

E2204-15: Standard Guide for Summarizing the Economic Impacts of Building-Related Projects

E2213-03(2010): Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications

E2235-04(2012): Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods

E2238-12: Standard Guide for Evacuation Route Diagrams

E2239-12(2016): Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities

E2249-02(2016): Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity

E2252-12: Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities

E2255/E2255M-13: Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings

E2257-17: Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies

E2259-03a(2011): Standard Guide for Archiving and Retrieving ITS-Generated Data

E2260-03(2012)e1: Standard Guide for Repointing (Tuckpointing) Historic Masonry

E2264-05(2013): Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

E2265-17: Standard Terminology for Anchors and Fasteners in Concrete and Masonry

E2266-11: Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion

E2267-04(2013): Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality

E2268-04(2016): Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference

E2269-14: Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

E2270-14: Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions

E2271-05a(2012)e1: Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities

E2273-03(2011): Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies

E2302-03a(2016): Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer

E2319-04(2011): Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

E2320-04(2012): Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions

E2321-03(2011): Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)

E2322-03(2015): Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction

E2340/E2340M-11(2015): Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

E2351-04a(2013): Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality

E2353-16: Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades

E2354-10: Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units

E2355-10: Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface

E2356-14: Standard Practice for Comprehensive Building Asbestos Surveys

E2357-17: Standard Test Method for Determining Air Leakage of Air Barrier Assemblies

E2358-17: Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades

E2359/E2359M-13: Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly

E2367-05(2014): Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter

E2377-10: Standard Specification for Shelter, Electrical Equipment, Lightweight

E2392/E2392M-10(2016): Standard Guide for Design of Earthen Wall Building Systems

E2393-10a(2015): Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers

E2394-11: Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products

E2395-06(2013): Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact

E2404-17: Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics

E241-09(2014)e1: Standard Guide for Limiting Water-Induced Damage to Buildings

E2430/E2430M-13: Standard Specification For Expanded Polystyrene (“EPS”) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (“EIFS”)

E2431-12: Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings

E2432-17: Standard Guide for General Principles of Sustainability Relative to Buildings

E2461-12(2017): Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs

E2468-05(2012): Standard Practice for Metadata to Support Archived Data Management Systems

E2484-08(2015): Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices

E2485/E2485M-13: Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings

E2486/E2486M-13: Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)

E2505-07(2014): Standard Practice for Industrial Rope Access

E2506-15: Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities

E2511-17: Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies

E2513-07(2012): Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems

E2514-15: Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses

E2515-11(2017): Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel

E2516-11: Standard Classification for Cost Estimate Classification System

E2556/E2556M-10(2016): Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment

E2557-16a: Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments

E2558-13: Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces

E2560-17: Standard Specification for Data Format for Pavement Profile

E2568-17a: Standard Specification for PB Exterior Insulation and Finish Systems

E2583-07(2015): Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

E2599-16: Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

E2600-15: Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions

E2611-17: Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based on the Transfer Matrix Method

E2618-13: Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances

E2619/E2619M-09e1: Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings

E2620-15: Standard Classification for Program and Project Estimate Summaries

E2632/E2632M-13e1: Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials

E2634-17: Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

E2635-14: Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation

E2637-17: Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification

E2638-10: Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room

E2649-12: Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

E2666-09(2014): Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

E2667-09(2017): Standard Practice for Acquiring Intersection Turning Movement Traffic Data

E2691-16: Standard Practice for Job Productivity Measurement

E2692-10: Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,

E2707-15: Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure

E2717-11: Standard Practice for Estimating the Environmental Load of Residential Wastewater

E2726/E2726M-12a: Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands

E2728-11: Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings

E274/E274M-15: Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

E2751/E2751M-17a: Standard Practice for Design and Performance of Supported Laminated Glass Walkways

E2759-10: Standard Practice for Highway Traffic Monitoring Truth-in-Data

E2766-13: Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs

E2768-11: Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)

E2779-10(2017): Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters

E2780-10(2017): Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters

E2785-14: Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions

E2786-10(2015): Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems

E2788-11: Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems

E2797-15: Standard Practice for Building Energy Performance Assessment for a Building Involved in a Real Estate Transaction

E2813-12e1: Standard Practice for Building Enclosure Commissioning

E2817-11: Standard Test Method for Test Fueling Masonry Heaters

E283-04(2012): Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

E2832-12: Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)

E2833-12: Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection

E2837-13(2017): Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies

E2840-11(2015): Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

E2841-11: Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions

E2883-13: Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)

E2912-17: Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction

E2921-16a: Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems

E2923-14: Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry

E2955-13: Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces

E303-93(2013): Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

E329-14a: Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

E330/E330M-14: Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

E331-00(2016): Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

E336-16a: Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

E405-04(2012): Standard Test Methods for Wear Testing Rotary Operators for Windows

E413-16: Classification for Rating Sound Insulation

E445/E445M-15: Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

E455-16: Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

E488/E488M-15: Standard Test Methods for Strength of Anchors in Concrete Elements

E492-09(2016)e1: Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

E514/E514M-14a: Standard Test Method for Water Penetration and Leakage Through Masonry

E518/E518M-15: Standard Test Methods for Flexural Bond Strength of Masonry

E519/E519M-15: Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages

E529-04(2011): Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction

E541-10: Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building

E546-14: Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units

E547-00(2016): Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

E557-12: Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions

E564-06(2012): Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

E569/E569M-13: Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

E575-05(2011): Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

E576-14: Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position

E580/E580M-17: Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions

E596-96(2016): Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures

E631-15: Standard Terminology of Building Constructions

E648-17: Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

E661-03(2015)e1: Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

E670-09(2015): Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter

E683-91(2013): Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings

E69-15: Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus

E695-03(2015)e1: Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

E699-16: Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components

E72-15: Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

E73-13: Standard Practice for Static Load Testing of Truss Assemblies

E741-11(2017): Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution

E754-80(2014)e1: Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints

E756-05(2010): Standard Test Method for Measuring Vibration-Damping Properties of Materials

E779-10: Standard Test Method for Determining Air Leakage Rate by Fan Pressurization

E783-02(2010): Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

E795-16: Standard Practices for Mounting Test Specimens During Sound Absorption Tests

E833-14: Standard Terminology of Building Economics

E84-17: Standard Test Method for Surface Burning Characteristics of Building Materials

E850-10: Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill

E864-12: Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E865-12: Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

E866-11: Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E874-11: Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels

E894-88(2010): Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

E90-09(2016): Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

E917-15: Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems

E935-13e1: Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings

E96/E96M-16: Standard Test Methods for Water Vapor Transmission of Materials

E964-15: Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems

E966-10e1: Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements

E970-17: Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

E987-88(2017): Standard Test Methods for Deglazing Force of Fenestration Products

E989-06(2012): Standard Classification for Determination of Impact Insulation Class (IIC)

E990-13: Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels

E997-15: Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing

E998-12: Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method

F1037-10(2016)e1: Standard Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic

F1043-17a: Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

F1066-04(2014)e1: Standard Specification for Vinyl Composition Floor Tile

F1083-16: Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

F1183-96(2017): Standard Specification for Aluminum Alloy Chain Link Fence Fabric

F1184-16: Standard Specification for Industrial and Commercial Horizontal Slide Gates

F1193-17: Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

F1216-16: Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

F1265-03a(2013): Standard Test Method for Resistance to Impact for Resilient Floor Tile

F1303-04(2014): Standard Specification for Sheet Vinyl Floor Covering with Backing

F1304-08(2013): Standard Test Method for Deflection of Resilient Floor Tile

F1336-15: Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

F1344-15: Standard Specification for Rubber Floor Tile

F1345-10a(2015): Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

F137-08(2013): Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

F1379-95(2013): Standard Terminology Relating to Barbed Tape

F141-12: Standard Terminology Relating to Resilient Floor Coverings

F1412-16: Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

F1417-11a(2015): Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

F1450-12a: Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities

F1482-15: Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring

F1499-12: Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

F150-06(2013): Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

F1504-14: Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation

F1514-03(2013): Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change

F1515-15: Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change

F1516-13: Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)

F1534-16: Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

F1550-16: Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter

F1553-11(2017): Standard Guide for Specifying Chain Link Fence

F1577-05(2012): Standard Test Methods for Detention Locks for Swinging Doors

F1592-12: Standard Test Methods for Detention Hollow Metal Vision Systems

F1606-05(2014): Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner

F1643-05(2012): Standard Test Methods for Detention Sliding Door Locking Device Assembly

F1664-08(2013): Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

F1673-10(2016): Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

F1675-13(2017): Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

F1697-09(2015): Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

F1698-02(2015)e1: Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits

F1700-13a: Standard Specification for Solid Vinyl Floor Tile

F1704-12(2017): Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems

F1732-12: Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material

F1735-09(2015): Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

F1741-08(2016): Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

F1743-17: Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

F1758-05(2012): Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors

F1759-97(2010): Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

F1803-15: Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter 

F1859-14e1: Standard Specification for Rubber Sheet Floor Covering Without Backing

F1860-14e1: Standard Specification for Rubber Sheet Floor Covering With Backing

F1861-16: Standard Specification for Resilient Wall Base

F1866-13(2017): Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

F1867-06(2012): Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F1869-16a: Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride

F1870-16: Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities

F1871-11: Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F1901-16: Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

F1908-08(2013): Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

F1910-98(2013): Standard Specification for Long Barbed Tape Obstacles

F1911-05(2015): Standard Practice for Installation of Barbed Tape

F1913-04(2014): Standard Specification for Vinyl Sheet Floor Covering Without Backing

F1914-07(2011): Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering

F1915-05(2012): Standard Test Methods for Glazing for Detention Facilities

F1947-10: Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits

F1962-11: Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings

F1999-14: Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

F2000-10: Standard Guide for Fences for Baseball and Softball Fields

F2019-11: Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)

F2021-11: Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems

F2034-08(2013): Standard Specification for Sheet Linoleum Floor Covering

F2049-11(2017): Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas

F2055-17: Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method

F2135-01(2017)e1: Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings

F2169-15e1: Standard Specification for Resilient Stair Treads

F2170-17: Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

F2175-07(2015): Standard Specification for Portable and Permanent Emergency Escape Ladders for Residential Use

F2195-13: Standard Specification for Linoleum Floor Tile

F2199-09(2014): Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat

F2200-17: Standard Specification for Automated Vehicular Gate Construction

F2208-08(2014): Standard Safety Specification for Residential Pool Alarms

F2233-03(2015): Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers

F2247-11(2017): Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)

F2286-16: Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas

F2303-03(2015): Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits

F2306/F2306M-14e1: Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

F2322-12: Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities

F2348-04(2017): Standard Performance Specification for Privacy Padlocks

F2387-04(2012): Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs

F2390-12(2017): Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content

F2408-16: Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

F2409-10(2016): Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas

F2418-16a: Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

F2419-11: Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring

F2421-05(2011): Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage

F2453/F2453M-14: Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2  [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes

F2462-05(2015): Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems

F2471-13: Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring

F2480-06(2017): Standard Guide for In-ground Concrete Skatepark

F2510/F2510M-07(2013): Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes

F2536-06b(2011): Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs

F2542-05(2012): Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities

F2548-12: Standard Specification for Expanded Metal Fence Systems for Security Purposes

F2561-16: Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner

F2562/F2562M-15: Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage

F2589-16: Standard Specification for Ornamental Fences Employing Steel Tubular Pickets

F2599-16: Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner

F2611-15: Standard Guide for Design and Construction of Chain Link Security Fencing

F2618-15: Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems

F2630-14: Standard Guide for Self-Closing/Self-Latching General-Purpose Gates

F2658-07(2013): Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings

F2659-10(2015): Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter

F2666-16: Standard Specification for Aboveground Portable Pools for Residential Use

F2678-16: Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring

F2707-10: Standard Safety Performance Specification for Safe Design and Installation of Field Fabricated Suction-Limiting Vent Systems for Suction Entrapment Prevention in Swimming Pools, Spas, Hot Tubs, and Wading Pools

F2718-09(2015): Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines

F2719-09(2015): Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines

F2753-10(2015): Standard Practice to Evaluate the Effect of Dynamic Rolling Load over Resilient Floor Covering System

F2763-16: Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

F2764/F2764M-17e1: Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

F2769-16: Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

F2780-09(2014): Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers

F2781-15: Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems

F2787-13: Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers

F2814-09(2015): Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes

F2831-12: Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

F2873-13: Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring

F2881-11(2015): Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

F2919/F2919M-12: Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels

F2922-13e1: Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers

F2927-12: Standard Test Method for Door Systems Subject to Airblast Loadings

F2929-13: Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig

F2946-12(2017): Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes

F2957-13: Standard Specification for Ornamental Aluminum Fence Systems

F2975-12(2017): Standard Test Method for Measuring the Field Performance of Commercial Kitchen Ventilation Systems

F2976-13: Standard Practice for Determining the Field Performance of Commercial Kitchen Demand Control Ventilation Systems

F2982-13: Standard Specification for Polyester Composition Floor Tile

F2984-13: Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits

F2994-13: Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems

F3000/F3000M-13: Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats

F3008-13e1: Standard Specification for Cork Floor Tile

F3009-14: Standard Specification for Polyolefin Composition Floor Tile

F3010-13: Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings

F373-13: Standard Test Method for Embossed Depth of Resilient Floor Coverings

F386-17: Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

F387-17: Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

F409-17: Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

F410-08(2013): Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement

F432-13: Standard Specification for Roof and Rock Bolts and Accessories

F481-97(2014): Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

F510/F510M-14: Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method

F511-17: Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile

F537-01(2014): Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

F552-14: Standard Terminology Relating to Chain Link Fencing

F567-14a: Standard Practice for Installation of Chain-Link Fence

F585-16: Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

F588-17: Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact

F626-14: Standard Specification for Fence Fittings

F628-12e2: Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

F654-07(2017): Standard Specification for Residential Chain Link Fence Gates

F679-16: Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

F693-01(2012): Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers

F710-17: Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

F794-03(2014): Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

F810-12: Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

F842-17: Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

F883-13: Standard Performance Specification for Padlocks

F894-13: Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

F900-11(2017): Standard Specification for Industrial and Commercial Steel Swing Gates

F924-90(2015): Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings

F925-13: Standard Test Method for Resistance to Chemicals of Resilient Flooring

F934-96(2017): Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

F949-15: Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

F964-13: Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

F969-11(2016): Standard Practice for Construction of Chain-Link Tennis Court Fence

F970-17: Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading

G109-07(2013): Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

G180-13: Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

G4-01(2014): Standard Guide for Conducting Corrosion Tests in Field Applications