All Automotive Standards

Search within Automotive


A159-83(2015): Standard Specification for Automotive Gray Iron Castings

A456/A456M-08(2013): Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

A503/A503M-15: Standard Specification for Ultrasonic Examination of Forged Crankshafts

A602-94(2014): Standard Specification for Automotive Malleable Iron Castings

A983/A983M-06(2016): Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

A986/A986M-01(2016): Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

B67-14: Standard Specification for Car and Tender Journal Bearings, Lined

D1119-05(2015): Standard Test Method for Percent Ash Content of Engine Coolants

D1120-17: Standard Test Method for Boiling Point of Engine Coolants

D1121-11: Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts

D1122-16(2017)e1: Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer

D1123-99(2015): Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method

D1176-14: Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes

D1177-17: Standard Test Method for Freezing Point of Aqueous Engine Coolants

D1195/D1195M-09(2015): Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

D1196/D1196M-12(2016): Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

D1287-11: Standard Test Method for pH of Engine Coolants and Antirusts

D1384-05(2012): Standard Test Method for Corrosion Test for Engine Coolants in Glassware

D1881-97(2009): Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware

D1882-96(2012): Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles

D2000-12(2017): Standard Classification System for Rubber Products in Automotive Applications

D2229-10(2014): Standard Test Method for Adhesion Between Steel Tire Cords and Rubber

D2570-16: Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants

D2692/D2692M-15: Standard Test Method for Air Permeability of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns

D2699-16e1: Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

D2700-16a: Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

D2758-94(2009): Standard Test Method for Engine Coolants by Engine Dynamometer

D2809-09(2017): Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants

D2847-15: Standard Practice for Testing Engine Coolants in Car and Light Truck Service

D2885-13: Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

D2969-04(2014): Standard Test Methods for Steel Tire Cords

D2970/D2970M-04(2014): Standard Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments

D3147-06(2013): Standard Test Method for Testing Stop-Leak Additives for Engine Coolants

D3227-16: Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

D3306-14: Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service

D3321-13: Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants

D3453-12: Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications

D3527-15: Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

D3606-10e1: Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography

D3634-99(2015): Standard Test Method for Trace Chloride Ion in Engine Coolants

D3703-13: Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

D3836-13: Standard Practice for Evaluation of Automotive Polish

D4290-15: Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

D4340-10: Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions

D4485-16: Standard Specification for Performance of Active API Service Category Engine Oils

D4602-93(2015): Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

D4682-13: Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

D4694-09(2015): Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

D4695-03(2015): Standard Guide for General Pavement Deflection Measurements

D4725-15: Standard Terminology for Engine Coolants and Related Fluids

D4742-17: Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

D4748-10(2015): Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

D4776/D4776M-10: Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure

D4806-17: Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D4814-17: Standard Specification for Automotive Spark-Ignition Engine Fuel

D4857-12: Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

D4858-13: Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

D4859-13: Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC

D4863-13: Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

D4921-95(2012): Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature

D4950-14: Standard Classification and Specification for Automotive Service Greases

D4955-89(2016): Standard Practice for Field Evaluation of Automotive Polish

D4975-14: Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel

D4985-10(2015): Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)

D4998-13: Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

D5066-91(2017): Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis

D5132-17: Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

D5426-12(2017): Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints

D5427-09(2014): Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics

D5428-08(2013): Standard Practice for Evaluating the Performance of Inflatable Restraint Modules

D5446-08(2013): Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints

D5500-16: Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D5579-16: Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

D5598-01(2012): Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

D5662-17: Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

D5704-17: Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

D5752-10(2017): Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines

D5760-13: Standard Specification for Performance of Manual Transmission Gear Lubricants

D5797-17: Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines

D5798-17: Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

D5807-08(2013): Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions

D5822-13: Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions

D5827-09(2015): Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography

D5828-97(2011)e1: Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates

D5858-96(2015): Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

D5931-13: Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter

D5966-13: Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

D5967-17: Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

D5968-17: Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C

D5983-17: Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

D6107-97(2017): Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service

D6121-17: Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

D6129-97(2015): Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy

D6130-11: Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

D6201-04(2014): Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D6208-07(2014): Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement

D6210-10: Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines

D622-99(2012): Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System

D6421-99a(2014): Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

D6423-14: Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends

D6433-16: Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

D6471-10: Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service

D6472-10: Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service

D6476-12(2017): Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics

D6477-13e1: Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics

D6478-10(2014): Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints

D6479-15: Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints

D6486-01(2017): Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings

D6557-13: Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

D6588/D6588M-11(2016): Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)

D6593-17: Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

D6594-14: Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C

D6618-16: Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

D6660-01(2014)e1: Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method

D6675-01(2015): Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

D6681-17: Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

D6709-15a: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

D6750-17: Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

D6794-14: Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long(6 h) Heating Time

D6795-13: Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

D6799-13: Standard Terminology Relating to Inflatable Restraints

D6837-13: Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

D6838-04(2010): Standard Test Method for Cummins M11 High Soot Test

D6891-15: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

D6894-13: Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

D6922-13: Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

D6923-17: Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

D6951/D6951M-09(2015): Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

D6975-04(2010): Standard Test Method for Cummins M11 EGR Test

D6984-17a: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

D6987/D6987M-13a: Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

D7038-17: Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

D7041-16: Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection

D7156-17: Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

D7212-13: Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

D7216-17: Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

D7220-12(2017): Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

D7228-06a(2015): Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

D7304-16: Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC

D7320-17a: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

D7356/D7356M-13: Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device

D7388-08(2013): Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)

D7422-17a: Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

D7437-08(2013): Standard Test Method for Temperature and Hard Water Stability of Engine Coolants

D7450-13: Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

D7452-17: Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading

D7468-16: Standard Test Method for Cummins ISM Test

D7484-16: Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

D7517-09(2014): Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines

D7518-10(2015)e1: Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service

D7528-17a: Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

D7549-17: Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

D7559/D7559M-09(2014): Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions

D7563-10(2016): Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel

D7583-16: Standard Test Method for John Deere Coolant Cavitation Test

D7589-16: Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

D7603-13: Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils

D7640-16: Standard Specification for Engine Coolant Grade Glycerin

D7667-10(2015): Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method

D7671-10(2015): Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

D7713-12: Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)

D7714-11(2016)e1: Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service

D7715-12(2016)e1: Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines

D7736-12: Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol

D7754-16: Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography

D7794-14: Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines

D7820-12: Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel

D7821-12: Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)

D7840-12(2017): Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware

D7862-17: Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

D7869-17: Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

D885/D885M-10A(2014)e1: Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers

E1082-90(2017): Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness

E1136-17: Standard Specification for P195/75R14 Radial Standard Reference Test Tire

E1166-00(2015): Standard Guide for Network Level Pavement Management

E1170-97(2017): Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

E1177-14: Standard Specification for Engine Coolant Grade Glycol

E1215-93(2017): Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

E1274-03(2017): Standard Test Method for Measuring Pavement Roughness Using a Profilograph

E1318-09(2017): Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods

E1337-90(2012): Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire

E1364-95(2017): Standard Test Method for Measuring Road Roughness by Static Level Method

E1448/E1448M-09(2015): Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

E1489-08(2013): Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

E1551-16: Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire

E1656/E1656M-11(2016): Standard Guide for Classification of Automated Pavement Condition Survey Equipment

E1703/E1703M-10(2015): Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

E1777-09(2015): Standard Guide for Prioritization of Data Needs for Pavement Management

E1778-98a(2015): Standard Terminology Relating to Pavement Distress

E1844-08(2015): Standard Specification for A Size 10 × 4–5 Smooth-Tread Friction Test Tire

E1845-15: Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth

E1859/E1859M-11(2015): Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

E1889-97(2015): Standard Guide for Pavement Management Implementation

E1890-11(2015): Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

E1911-09ae1: Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

E1926-08(2015): Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

E1927-98(2012): Standard Guide for Conducting Subjective Pavement Ride Quality Ratings

E1957-04(2010): Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers

E1960-07(2015): Standard Practice for Calculating International Friction Index of a Pavement Surface

E2034-99(2017): Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

E2100-04(2015): Standard Practice for Calculating the International Runway Friction Index

E2133-03(2013): Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface

E2157-15: Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter

E2213-03(2010): Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications

E2259-03a(2011): Standard Guide for Archiving and Retrieving ITS-Generated Data

E2300-09(2017): Standard Specification for Highway Traffic Monitoring Devices

E2340/E2340M-11(2015): Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

E2341/E2341M-05(2014): Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

E2380/E2380M-15: Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter

E2415-05(2012): Standard Practice for Installing Piezoelectric Highway Traffic Sensors

E2462-10: Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I

E2463-11: Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II

E2467-05(2012): Standard Practice for Developing Axle Count Adjustment Factors

E2468-05(2012): Standard Practice for Metadata to Support Archived Data Management Systems

E2517-13: Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)

E2518-11: Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)

E2532-09(2017): Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

E2560-17: Standard Specification for Data Format for Pavement Profile

E2561-07a(2012): Standard Practice for the Installation of Inductive Loop Detectors

E2583-07(2015): Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

E2667-09(2017): Standard Practice for Acquiring Intersection Turning Movement Traffic Data

E274/E274M-15: Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

E2759-10: Standard Practice for Highway Traffic Monitoring Truth-in-Data

E2793-16: Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

E2835-11(2015): Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device

E2840-11(2015): Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

E2883-13: Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)

E2955-13: Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces

E303-93(2013): Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

E445/E445M-15: Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

E501-08(2015): Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

E524-08(2015): Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

E556/E556M-11(2015): Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

E660-90(2015): Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine

E670-09(2015): Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter

E867-06(2012): Standard Terminology Relating to Vehicle-Pavement Systems

E950/E950M-09: Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

E965-15: Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

F1016-07(2013)e1: Standard Practice for Linear Tire Treadwear Data Analysis

F1035-03(2015): Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System

F1046-01(2015): Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing

F1112-06a(2010): Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure

F1364-03(2015): Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System

F1426-11: Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use

F1502-05(2016): Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles

F1517-14: Standard Guide for Scope of Performance of Emergency Medical Services Ambulance Operators

F1572-08(2015): Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces

F1649-13: Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems

F1650-98(2014)e1: Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions

F1705-96(2012): Standard Guide for Training Emergency Medical Services Ambulance Operations

F1805-16: Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces

F1806-14: Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use

F1922-98(2014): Standard Test Method for Tires, Pneumatic, Vehicular, Highway

F1923-98(2014): Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway

F1971-12: Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench

F2020-02a(2009): Standard Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances

F2162-01(2016): Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type

F2163-01(2016): Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring

F2246-06(2013): Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage

F2430-04(2012): Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)

F2431-04(2012): Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring

F2493-14: Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire

F2590-06(2013): Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type

F2591-06(2013): Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)

F2663-15: Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires

F2779-10(2016): Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface

F2803-09(2015): Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels

F2838-17: Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation

F2869-10(2016): Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface

F2870-16: Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire

F2871-16: Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire

F2872-16: Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire

F3015-13: Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E

F377-03(2015): Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires

F408-99(2015): Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer

F414-15: Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger

F421-15: Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires

F457-04(2017): Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation

F538-13: Standard Terminology Relating to the Characteristics and Performance of Tires

F551/F551M-16: Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires

F559-05(2017): Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel

F724-94a(2016): Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

F762/F762M-08(2014): Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires

F811-02(2016): Standard Practice for Accelerometer Use in Vehicles for Tire Testing

F870-94(2016): Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements