Journal Published Online: 09 October 2018
Volume 42, Issue 5

A Tensile Strength Apparatus with the Facility to Monitor Negative Pore-Water Pressure

CODEN: GTJODJ

Abstract

This article presents a new testing method for investigating the behavior of clayey geomaterials subjected to a tensile (negative) total stress. The method includes the use of high-capacity tensiometers to measure the pore–water pressure of the test specimen, an aspect which has not been demonstrated in any other direct tensile testing method. This addition allows interpretation of failure data in terms of effective stress rather than total stress, which is the approach that should be pursued in the saturated range. The test specimen shape and loading method have been modified from those commonly seen in existing literature to ensure that the direction of the major principal stress in the failure zone coincides with the direction of the externally applied tensile force, allowing for a more accurate analysis of tensile failure. Results are shown for saturated specimens and compared to results obtained for the same soil in uniaxial compression, using a modified version of the presented uniaxial tensile method, and a triaxial compression test. It is demonstrated that crack initiation occurs by shear failure if the data are interpreted in terms of effective stress rather than total stress and that the failure mechanisms under tension do not differ from compression.

Author Information

Murray, Ian
Department of Civil and Environmental Engineering, University of Strathclyde, Glasgow, Scotland, UK
Tarantino, Alessandro
Department of Civil and Environmental Engineering, University of Strathclyde, Glasgow, Scotland, UK
Francescon, Fernando
Department of Process Technology, Ideal Standard Italia S.r.l., Trichiana, Italy
Pages: 18
Price: $25.00
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Stock #: GTJ20170354
ISSN: 0149-6115
DOI: 10.1520/GTJ20170354