Journal Published Online: 12 March 2009
Volume 32, Issue 4

Design and Evaluation of Two Laboratory Tests for the Nets of a Flexible Anchored Slope Stabilization System



This paper evaluates two new tests to characterize cable nets used in slope stabilization; a concentrated load test (CLT) and a distributed load test (DLT). These tests enable engineers to obtain the stress versus displacement graph and the maximum resistance. Both test devices and test methodology have been designed by the Construction Technology Research Group (GITECO) at the University of Cantabria. These two tests have enabled the certification of two different manufacturers of cable nets, Geobrugg and Malla Talud Cantabria (MTC). The results showed that these tests provide representative results of the net resistance. To verify the effectiveness of these new tests, they have been performed with various cable nets, from which homogeneous, logical results have been obtained, which are representative of the real working conditions. When performing the distributed load test, the force was applied to a pyramid of fine gravel sacks that enabled the forces to be distributed throughout the net. With this configuration, the net was deformed, acquiring an elliptical form in the lower free area. In the concentrated load test, the force was applied through a metallic plate of 600 mm diameter that deformed the net locally. The result always showed homogeneous behavior of the different samples tested. This allowed the test to be repeated in the same conditions several times. With the results of both tests an analysis was carried out relating the net grid, the load applied, and the displacement obtained. This enabled the generation of regression functions that provided information about the resistance value and the net displacement according to the chosen grid.

Author Information

Castro-Fresno, Daniel
Department of Construction, ETSIPCC, University of Cantabria, Santander, Spain
López Q., Luis
Escuela de Ingeniería en Construcción, Chile
Blanco-Fernandez, Elena
Department of Construction, ETSIPCC, University of Cantabria, Santander, Spain
Zamora-Barraza, David
Escuela de Ingeniería en Construcción, Chile
Pages: 10
Price: $25.00
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Stock #: GTJ101218
ISSN: 0149-6115
DOI: 10.1520/GTJ101218