Standard Historical Last Updated: Feb 27, 2023 Track Document
ASTM G102-89(2015)e1

Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements G0102-89R15E01 ASTM|G0102-89R15E01|en-US Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements Standard new BOS Vol. 03.02 Committee G01
$ 83.00 In stock

Significance and Use

3.1 Electrochemical corrosion rate measurements often provide results in terms of electrical current. Although the conversion of these current values into mass loss rates or penetration rates is based on Faraday's Law, the calculations can be complicated for alloys and metals with elements having multiple valence values. This practice is intended to provide guidance in calculating mass loss and penetration rates for such alloys. Some typical values of equivalent weights for a variety of metals and alloys are provided.

3.2 Electrochemical corrosion rate measurements may provide results in terms of electrical resistance. The conversion of these results to either mass loss or penetration rates requires additional electrochemical information. Some approaches for estimating this information are given.

3.3 Use of this practice will aid in producing more consistent corrosion rate data from electrochemical results. This will make results from different studies more comparable and minimize calculation errors that may occur in transforming electrochemical results to corrosion rate values.

Scope

1.1 This practice covers the providing of guidance in converting the results of electrochemical measurements to rates of uniform corrosion. Calculation methods for converting corrosion current density values to either mass loss rates or average penetration rates are given for most engineering alloys. In addition, some guidelines for converting polarization resistance values to corrosion rates are provided.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 03.02
Developed by Subcommittee: G01.11
Pages: 7
DOI: 10.1520/G0102-89R15E01
ICS Code: 77.060