Standard Active Last Updated: Oct 15, 2020
ASTM F2238-20

Standard Test Method for Performance of Rapid Cook Ovens

Significance and Use

5.1 The energy input rate test is used to confirm that the rapid cook oven is operating properly prior to further testing.

5.2 Preheat energy and time can be useful to food service operators to manage power demands and to know how quickly the rapid cook oven can be ready for operation.

5.3 Idle energy rate and pilot energy rate can be used to estimate energy consumption during non-cooking periods.

5.4 Cooking-energy efficiency is a precise indicator of a rapid cook oven's energy performance while cooking a typical food product. If energy performance information is desired using a food product other than the specified test food, the test method could be adapted and applied. Energy performance information allows an end user to better understand the operating characteristics of a rapid cook oven.

5.5 Production capacity information can help an end user to better understand the production capabilities of a rapid cook oven as it is used to cook a typical food product and this could help in specifying the proper size and quantity of equipment. If production information is desired using a food product other than the specified test food, the test method could be adapted and applied.

Scope

1.1 This test method evaluates the energy consumption and cooking performance of rapid cook ovens. The food service operator can use this evaluation to select a rapid cook oven and understand its energy consumption.

1.2 This test method is applicable to gas and electric rapid cook ovens.

1.3 The rapid cook oven can be evaluated with respect to the following (where applicable):

1.3.1 Energy input rate (see 10.2),

1.3.2 Preheat energy consumption and time (see 10.3),

1.3.3 Idle energy rate (see 10.4),

1.3.4 Pilot energy rate (if applicable) (see 10.5), and

1.3.5 Cooking-energy efficiency, cooking energy rate, and production capacity (see 10.6).

1.4 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This test method may involve hazardous materials, operations, and equipment. This test method does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this test method to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 15.12
Developed by Subcommittee: F26.06
Pages: 13
DOI: 10.1520/F2238-20
ICS Code: 97.040.20