Standard Active Last Updated: Oct 29, 2024 Track Document
ASTM F2155-01(2024)

Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals

Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals F2155-01R24 ASTM|F2155-01R24|en-US Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals Standard new BOS Vol. 15.08 Committee F12
$ 76.00 In stock
ASTM International

Abstract

This specification describes and grades various levels of performance to provide standard criteria upon which to select suitable hasps and other attachment devices for padlocks and seals. Specially made hasps used by the Department of Defense or other highly sensitive applications are not covered by this specification. The tests specified are laboratory tests, and although they simulate field conditions as to attacks, they do not duplicate these conditions. Hasps that have special attributes not related to security may be used. Test specimen of each size and model shall be selected at random. Four hasps shall be selected for the forcing tests. Test apparatus preparation for the tensile loading device, shock impactor, and torque test fixture are detailed. Forcing tests includes the following: (1) staple axial load test, (2) hasp staple impact test, (3) hasp staple cutting test, and (4) hasp staple torque test. The test value requirements for the forcing tests are specified for the following grades: Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, and Grade 6. The impact fixture assembly including the mounting block, anvil assembly, and weight assembly; assemble torque fixture; staple axial load test fixture; and staple cutting fixture are illustrated in detail.

Scope

1.1 This specification describes and grades various levels of performance to provide users of the standard with criteria upon which to select suitable hasps and other attachment devices. No effort has been made to include criteria for specially made hasps used by the Department of Defense or other highly sensitive applications.

1.2 The tests described are laboratory tests, and although they simulate field conditions as to attacks, they do not duplicate these conditions. Tests described are repeatable in the laboratory.

1.3 Some users of this standard may wish to use hasps that have special attributes not related to security.

1.4 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 15.08
Developed by Subcommittee: F12.50
Pages: 15
DOI: 10.1520/F2155-01R24
ICS Code: 21.060.10