Standard Active Last Updated: Sep 18, 2024 Track Document
ASTM F624-09(2024)

Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications

Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications F0624-09R24 ASTM|F0624-09R24|en-US Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications Standard new BOS Vol. 13.01 Committee F04
$ 61.00 In stock
ASTM International

Significance and Use

4.1 This guide is intended to aid device fabricators in the selection of proper commercially available polyurethane solids and solutions for their application.

4.2 The polyurethanes covered by this guide may be thermoformed or solution cast into biomedical devices for use as surgical aids or for implantation as determined to be appropriate, based on supporting biocompatibility and physical test data.

Scope

1.1 This guide covers the evaluation of thermoplastic polyurethanes in both solid and solution form for biomedical applications. The polymers have been reacted to completion and require no further chemical processing.

1.2 The tests and methods listed in this guide may be referenced in specifications containing minimum required values and tolerances for specific end-use products.

1.3 Standard tests for biocompatibility are included to aid in the assessment of safe utilization in biomedical applications. Compliance with these criteria shall not be construed as an endorsement of implantability. Since many compositions, formulations, and forms of thermoplastic polyurethanes in solid and solution forms are within this material class, the formulator or fabricator must evaluate the biocompatibility of the specific composition or form in the intended use and after completion of all manufacturing processes including sterilization.

1.4 Purchase specifications may be prepared by agreement between the buyer and seller by selection of appropriate tests and methods from those listed applicable to the specific biomedical end use.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 13.01
Developed by Subcommittee: F04.11
Pages: 4
DOI: 10.1520/F0624-09R24
ICS Code: 11.100.99; 83.080.20