Standard Historical Last Updated: Aug 16, 2017 Track Document
ASTM F594-01

Standard Specification for Stainless Steel Nuts

Standard Specification for Stainless Steel Nuts F0594-01 ASTM|F0594-01|en-US Standard Specification for Stainless Steel Nuts Standard new BOS Vol. 01.09 Committee F16
$ 75.00 In stock

Scope

1.1 This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in. in nominal diameter inclusive in a number of alloys in common use and intended for service applications requiring general corrosion resistance.

1.2 Seven groups of stainless steel alloys are covered, including ten austenitic, two ferritic, four martensitic, and one precipitation hardening.

Group AlloysAConditionB
1 304, 305, 304L, 384, 18-9LW, 302HQ(CW) cold workedD
2 316, 316L (CW) cold worked
3 321, 347 (CW) cold worked
4430 (CW) cold worked
5 410(H) hardened and tempered
6431 (H) hardened and tempered
7 630 (AH) aged hardened

AUnless otherwise specified on the inquiry and order, the choice of an alloy from within a group shall be at the discretion of the fastener manufacturer (see 6.1 ).
BSee 4.2 for options.
CWhen approved by the purchaser, alloys 303, 303Se, or XM1 may be furnished.
DSizes 0.75 in. and larger may be hot worked and solution annealed.
EWhen approved by the purchaser, alloy 430F may be furnished.
FWhen approved by the purchaser, alloy 416 or 416Se may be furnished.

1.3 Supplementary requirements of an optional nature are provided, applicable only when agreed upon by the manufacturer and the purchaser at the time of the inquiry and order.

1.4 Suitable bolts, hex cap screws, and studs for use with nuts included in this specification are covered by Specification F 593. Unless otherwise specified, all bolts, hex cap screws, and studs used with these nuts shall conform to the requirements of Specification F 593 and shall be of the same alloy group.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.09
Developed by Subcommittee: F16.04
Pages: 7
DOI: 10.1520/F0594-01
ICS Code: 21.060.20