Standard Active Last Updated: Jan 25, 2023 Track Document
ASTM E3054/E3054M-23

Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes

Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes E3054_E3054M-23 ASTM|E3054_E3054M-23|en-US Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes Standard new BOS Vol. 04.12 Committee E06
$ 63.00 In stock

Significance and Use

4.1 This guide is intended to provide the framework for characterizing the functions of the hygrothermal model and the level of sophistication used as inputs for each analysis. Hygrothermal modeling has become an important practice in support of the decision-making design processes involved in moisture management of building envelope systems. Increasingly, hygrothermal models are an integral part of building envelope performance assessment, retrofit, and restoration studies and provide insight in the screening of alternative design approaches affecting water management of the envelope system. Hygrothermal models are used in decision making during the design process of building envelope systems. They may also be used to assess performance of the envelopes of existing buildings, or to predict envelope performance in buildings undergoing retrofit, change in use, restoration or flood remediation. It is, therefore, important to have a methodology to document the model used in a hygrothermal investigation. This documentation provides needed characterization of the hygrothermal model to assess its credibility and suitability. This becomes even more important because of the increasing complexity of the building envelope systems for which new hygrothermal models are being developed. There are many different hygrothermal models available, each with specific capabilities, operational characteristics, and limitations. If modeling is considered for a project, it is important to determine if a hygrothermal model is appropriate for that project, or if a model exists that can perform the simulations required in the project.

4.2 Quality assurance in a hygrothermal analysis using modeling is achieved by using the most appropriate model with all important transport mechanisms, initial conditions, and boundary conditions. A well-executed quality assurance program in hygrothermal modeling requires systematic and complete documentation of the model and the inputs followed by consistent reporting of the results. This guide sets forth a format for reporting hygrothermal modeling results.

Scope

1.1 This guide offers guidance for the characterization and use of hygrothermal models for moisture control design of building envelopes. In this context, “hygrothermal models” refers to the application of a mathematical model to the solution of a specific heat and moisture flow performance issue or problem. Hygrothermal models are used to predict and evaluate design considerations for the short-term and long-term thermal and moisture performance of building envelopes.

1.2 Each hygrothermal model has specific capabilities and limitations. Determining the most appropriate hygrothermal model for a particular application requires a thorough analysis of the problem at hand, understanding the required transport processes involved, and available resources to conduct the analysis. Users of this guide can describe the functionality of the hygrothermal model used in an analysis in a consistent manner.

1.3 This guide applies to hygrothermal models that range from complex research tools to simple design tools. This guide provides a protocol for matching the analysis needs and the capabilities of candidate models.

1.4 This guide applies to the use of models that include all or part of the following thermal and moisture storage and transport phenomena: (1) heat storage of dry and wet building materials, (2) heat transport by moisture-dependent thermal conduction, (3) phase change phenomena (for example, evaporation and condensation), (4) heat transport by air convection, (5) moisture retention by vapor adsorption and capillary forces, (6) moisture transport by vapor diffusion (molecular and effusion), (7) moisture transport by liquid transport (surface diffusion and capillary flow), and (8) moisture (vapor) transport by air convection.

1.5 This guide does not apply to cases requiring analysis of the following: (1) convection that occurs in a three-dimensional manner or through holes and cracks; (2) hydraulic, osmotic, or electrophoretic forces; (3) salt or other solute transport; or (4) material properties that change with age.

1.6 This guide intends to provide guidance regarding the reliability of input and how the corresponding results can be affected as well as a format for determining such information.

1.7 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.8 This guide offers an organized characterization of hygrothermal models and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM International consensus process.

1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.12
Developed by Subcommittee: E06.41
Pages: 9
DOI: 10.1520/E3054_E3054M-23
ICS Code: 91.120.10