Standard Active Last Updated: May 09, 2024 Track Document
ASTM E2840-11(2024)

Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots E2840-11R24 ASTM|E2840-11R24|en-US Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots Standard new BOS Vol. 04.03 Committee E17
$ 99.00 In stock
ASTM International

Significance and Use

4.1 The PCI is a numerical indicator that rates the surface condition of the pavement. The PCI provides a measure of the present condition of the pavement based on the distress observed on the surface of the pavement, which also indicates the structural integrity and surface operational condition (localized roughness and safety). The PCI does not measure structural capacity nor does it provide direct measurement of skid resistance or roughness. It provides an objective and rational basis for determining maintenance and repair needs and priorities. Regular monitoring of the PCI is used to establish the rate of pavement deterioration, which permits early identification of major rehabilitation needs. The PCI can also provide feedback on pavement performance for validation or improvement of current pavement design and maintenance procedures.

4.2 The PCI procedure for interlocking concrete pavements was developed by surveying many sample units. Additional verification of the accuracy and repeatability of the PCI procedure for interlocking concrete pavements remains to be performed.

Scope

1.1 This practice is used to assess the condition of roads and parking lots surfaced with interlocking concrete pavement through visual surveys using the Pavement Condition Index (PCI) method of quantifying pavement condition.

1.2 The PCI for roads and parking lots was developed by the U.S. Army Corps of Engineers (1, 2).2 It is further verified and adopted by DOD and APWA. This standard is an adaptation of the PCI method for interlocking concrete pavements.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.03
Developed by Subcommittee: E17.42
Pages: 22
DOI: 10.1520/E2840-11R24
ICS Code: 93.080.20