Standard Historical Last Updated: Feb 15, 2012 Track Document
ASTM E1834-09

Standard Test Method for Determination of Lead in Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

Standard Test Method for Determination of Lead in Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry E1834-09 ASTM|E1834-09|en-US Standard Test Method for Determination of Lead in Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry Standard new BOS Vol. 03.05 Committee E01
$ 66.00 In stock

Significance and Use

This test method is used for the determination of trace levels of lead in nickel alloys by GF-AAS to check compliance with compositional specifications. It is assumed that the procedure will be performed by trained analysts capable of performing common laboratory practices skillfully and safely. It is expected that the work will be performed in a properly equipped laboratory and proper waste disposal procedures will be followed. Appropriate quality control practices must be followed such as those described in Guide E 882.

Scope

1.1 This test method covers the determination of lead in nickel alloys in the concentration range 0.00005 % to 0.001 % by graphite furnace atomic absorption spectrometry (GF-AAS).

Note 1—If this test method is used to test materials having contents less than 0.0001 % lead, users in different laboratories may experience more than the usual 5 % risk that their results will differ by more than 50 % relative error.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards associated with the use of this test method, see Practices E 50.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 03.05
Developed by Subcommittee: E01.08
Pages: 4
DOI: 10.1520/E1834-09
ICS Code: 77.120.40