Standard Historical Last Updated: Apr 04, 2018 Track Document
ASTM E1693-95(2012)

Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets

Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets E1693-95R12 ASTM|E1693-95R12|en-US Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets Standard new BOS Vol. 04.11 Committee E06
$ 83.00 In stock

Significance and Use

Each facility rating scale in this classification provides a means for estimating the level of serviceability of a building or facility for one topic of serviceability, and for comparing that level against the level of any other building or facility.

This classification can be used for comparing how well different buildings or facilities meet a particular requirement for serviceability. It is applicable despite differences such as location, structure, mechanical systems, age, and building shape.

This classification can be used to estimate the amount of variance of serviceability from target or from requirement, for a single office facility, or within a group of office facilities.

This classification can be used to estimate the following: (1) the serviceability of an existing facility for uses other than its present use; (2) the serviceability (potential) of a facility that has been planned but not yet built; and (3) the serviceability (potential) of a facility for which a remodeling has been planned.

The use of this classification does not result in building evaluation or diagnosis. Building evaluation or diagnosis generally requires a special expertise in building engineering or technology and the use of instruments, tools, or measurements.

This classification applies only to facilities that are building constructions or parts thereof. (While this classification may be useful in rating the serviceability of facilities that are not building constructions, such facilities are outside the scope of this classification.)

This classification is not intended for, and is not suitable for, use for regulatory purposes, nor for fire hazard assessment or fire risk assessment.

Scope

1.1 This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements to protect occupant assets.

1.2 Each pair of scales, shown in Figs. 1-8, printed side by side on a page, are for classifying one topic of serviceability within that aspect of serviceability. Each paragraph in an Occupant Requirement Scale (see Figs. 1-8) summarizes one level of serviceability on that topic that occupants might require. The matching entry in the Facility Rating Scale (see Figs. 1-8) is a translation of the requirement into a description of certain features of a facility that, taken in combination, indicate that the facility is likely to meet that level of required serviceability.

1.3 The entries in the Facility Rating Scale (see Figs. 1-8) are indicative and not comprehensive. They are for quick scanning, to estimate approximately, rapidly, and economically, how well an office facility is likely to meet the needs of one or another type of occupant group over time. The entries are not for measuring, knowing, and evaluating how an office facility is performing.

1.4 This classification can be used to estimate the level of serviceability of an existing facility. It can also be used to estimate the serviceability of a facility that has been planned but not yet built, such as one for which single-line drawings and outline specifications have been prepared.

1.5 This classification indicates what would cause a facility to be rated at a certain level of serviceability, but it does not state how to conduct a serviceability rating nor how to assign a serviceability score. That information is found in Practice E1334. The scales in this classification are complementary to and compatible with Practice E1334. Each requires the other.


FIG. 1 Scale A.8.1 for Control of Access from Building Public Zone to Occupant Reception Zone


FIG. 1Scale A.8.1 for Control of Access from Building Public Zone to Occupant Reception Zone (continued)


FIG. 2 Scale A.8.2 for Interior Zones of Security


FIG. 2Scale A.8.2 for Interior Zones of Security (continued)


FIG. 3 Scale A.8.3 for Vaults and Secure Rooms


FIG. 3Scale A.8.3 for Vaults and Secure Rooms (continued)


FIG. 4 Scale A.8.4 for Security of Cleaning Service Systems


FIG. 4Scale A.8.4 for Security of Cleaning Service Systems (continued)


FIG. 5 Scale A.8.5 for Security of Maintenance Service Systems


FIG. 6 Scale A.8.6 for Security of Renovations Outside Active Hours


FIG. 6Scale A.8.6 for Security of Renovations Outside Active Hours (continued)


FIG. 7 Scale A.8.7 for Systems for Secure Garbage


FIG. 8 Scale A.8.8 for Security of Key and Card Control Systems

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.11
Developed by Subcommittee: E06.25
Pages: 15
DOI: 10.1520/E1693-95R12
ICS Code: 35.260