Standard Active Last Updated: Sep 13, 2021 Track Document
ASTM E1653-94(2021)

Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides

Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
$ 50.00 In stock

Significance and Use

4.1 Many characteristics of a fiber-optic waveguide affect the dynamic performance. Quantitative values of certain key parameters (characteristics) need to be known, a priori, in order to predict or evaluate the dynamic performance of a waveguide for specific conditions of use. This guide identifies these key parameters and provides information on their significance and how they affect performance. However, this guide does not describe how the needed quantitative information is to be obtained. Manufacturers of fiber-optic waveguides can use this guide for characterizing their products suitably for users who are concerned with dynamic performance. Users of fiber-optic waveguides can use this guide to determine that their waveguides are adequately characterized for their intended application.


1.1 This guide covers the key parameters that determine the dynamic performance of an optical radiation transmitting fiber waveguide (see Note 1). For the purpose of this guide, optical radiation is electromagnetic radiation of wavelengths from about 200 nm to about 5000 nm (correspondingly, frequencies of 50 000 cm−1 to 2000 cm−1, and photon energies of 6 eV to 0.25 eV).

Note 1: Typical designations of radiation transmitting fiber waveguides include optical waveguide, fiber-optic, fiber-optic waveguide, and fiber-optic radiation guide.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Contact Sales
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Book of Standards Volume: 03.06
Developed by Subcommittee: E13.09
Pages: 3
DOI: 10.1520/E1653-94R21
ICS Code: 33.180.01