Standard Historical Last Updated: Nov 21, 2017 Track Document
ASTM E803-91(2013)

Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams

Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams E0803-91R13 ASTM|E0803-91R13|en-US Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams Standard new BOS Vol. 03.03 Committee E07
$ 83.00 In stock

Significance and Use

4.1 The quality of a neutron radiographic image is dependent upon many factors. The L/D ratio is one of those factors and constitutes a numerical definition of the geometry of the neutron beam. The L/D ratio required for a specific neutron radiographic examination is dependent upon the thickness of the specimen and the physical characteristics of the particular element of interest. Use of this test method allows the radiographer and the user to determine and periodically check the effective collimation ratio.

Scope

1.1 This test method defines an empirical technique for the measurement of the effective collimation ratio, L/D, of neutron radiography beams. The technique is based upon analysis of a neutron radiographic image and is independent of measurements and calculations based on physical dimensions of the collimator system. The values derived by this technique should be more accurate than those based on physical measurements, particularly for poorly defined apertures.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 03.03
Developed by Subcommittee: E07.05
Pages: 7
DOI: 10.1520/E0803-91R13
ICS Code: 19.100