Standard Active Last Updated: Sep 13, 2022 Track Document
ASTM E581-17A(2022)e1

Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys E0581-17AR22E01 ASTM|E0581-17AR22E01|en-US Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys Standard new BOS Vol. 03.05 Committee E01
$ 69.00 In stock

Significance and Use

4.1 These test methods for the chemical analysis of metals and alloys are primarily intended to test such materials for compliance with compositional specifications. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory.

Scope

1.1 These test methods cover the chemical analysis of manganese-copper alloys having chemical compositions within the following limits:

Element

Range, %

Copper

68.0 to 72.0

Manganese

28.0 to 32.0

Carbon

0.03 max

Iron

0.01 max

Phosphorus

0.01 max

Silicon

0.05 max

Sulfur

0.01 max

1.2 The test methods appear in the following order:

 

Sections

Iron by the 1,10-Phenanthroline
 Spectrophotometric Method
 [0.003 % to 0.02 %]

11 – 20

Manganese by the (Ethylenedinitrilo)
 Tetraacetic Acid (EDTA)—
 Back-Titrimetric Method [28 % to 32 %]


21 – 27

Phosphorus by the
 Molybdivanadophosphoric Acid
 Extraction Spectrophotometric Method
 [0.002 % to 0.014 %]


28 – 38

1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 03.05
Developed by Subcommittee: E01.05
Pages: 6
DOI: 10.1520/E0581-17AR22E01
ICS Code: 77.040.30; 77.120.30