Standard Historical Last Updated: Aug 16, 2017 Track Document
ASTM E570-97

Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products E0570-97 ASTM|E0570-97|en-US Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products Standard new BOS Vol. 03.03 Committee E07
$ 83.00 In stock

Scope

1.1 This practice covers the application and calibration of equipment using the flux leakage test method for detection of outer surface, inner surface, and subsurface discontinuities in ferromagnetic steel tubular products (Note 1) of uniform cross section such as seamless and welded tubing.

Note 1-The term "tube" or "tubular product" will be used to refer to both pipe and tubing.

1.2 This practice is intended for use on tubular products having outside diameters from approximately 1/2 to 24 in. (12.7 to 610 mm) with wall thicknesses to 1/2 in. These techniques have been used for other sizes, however, and may be so specified upon contractual agreement between the purchaser and the supplier.

1.3 This practice does not establish acceptance criteria; they must be specified by the using parties.

1.4 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 03.03
Developed by Subcommittee: E07.07
Pages: 7
DOI: 10.1520/E0570-97
ICS Code: 77.040.20; 77.140.40