Standard Historical Last Updated: Aug 11, 2016 Track Document
ASTM E345-93(2013)e1

Standard Test Methods of Tension Testing of Metallic Foil

Standard Test Methods of Tension Testing of Metallic Foil E0345-93R13E01 ASTM|E0345-93R13E01|en-US Standard Test Methods of Tension Testing of Metallic Foil Standard new BOS Vol. 03.01 Committee E28
$ 75.00 In stock

Significance and Use

4.1 Tension tests provide information on the strength and ductility of materials under uniaxial tensile stresses. This information may be useful in comparisons of materials, alloy development, quality control, and design.

4.2 The results of tension tests from selected portions of a part or material may not totally represent the strength and ductility of the entire end product of its in-service behavior in different environments.

4.3 These test methods are considered satisfactory for acceptance testing of commercial shipments, since the methods have been used extensively for these purposes.

4.4 Tension tests provide a means to determine the ductility of materials through the measurement of elongation or reduction of area. However, as specimen thickness is reduced, tension tests may become less useful for determining ductility. For these purposes Test Method E796 is an alternative procedure for measuring ductility.


1.1 These test methods cover the tension testing of metallic foil at room temperature in thicknesses less than 0.006 in. (0.150 mm).

Note 1Exception to these methods may be necessary in individual specifications or test methods for a particular material.

1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Contact Sales
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Book of Standards Volume: 03.01
Developed by Subcommittee: E28.04
Pages: 5
DOI: 10.1520/E0345-93R13E01
ICS Code: 77.040.10