Standard Historical Last Updated: May 29, 2024 Track Document
ASTM E202-18

Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols

Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols E0202-18 ASTM|E0202-18|en-US Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols Standard new BOS Vol. 06.04 Committee D16
$ 91.00 In stock
ASTM International

Significance and Use

3.1 These test methods measure certain chemical and physical properties of ethylene glycols and propylene glycols and may be used to determine compliance with specification in which limits are established for these properties. For those tests that use the procedure of another ASTM test method, that test method should be consulted for additional information on the significance and use of that test.

3.2 Alternative test methods and technology for several of the methods can be found in the Appendix. Use of these methods is optional and individuals using the alternative methods should assure themselves that the method is sufficient and appropriate for the application. Precision data presented in this standard is only for the original test methods listed.

Scope

1.1 These test methods cover the chemical and physical analysis of the commonly available grades of ethylene glycol, diethylene glycol, triethylene glycol, propylene glycol, and dipropylene glycol. The key sections appear in the following order:

 

Sections

 

Purity of Reagents

4

Specific Gravity

6 – 8

Distillation Range

10 – 12

Acidity

14 – 16

Water

18 – 20

Iron

22 – 24

Color

26 – 28

Gas Chromatographic Analysis

30 – 32

Alternative Test Methods

Appendix X1

1.2 Review the current appropriate Safety Data Sheets (SDS) for detailed information concerning toxicity, first aid procedures, and safety precautions.

1.3 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard with the exception of foot-pound for apparatus descriptions.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 06.04
Developed by Subcommittee: D16.14
Pages: 14
DOI: 10.1520/E0202-18
ICS Code: 71.080.60