Standard Historical Last Updated: Apr 27, 2016 Track Document
ASTM D7845-13

Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography – Mass Spectrometry

Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography – Mass Spectrometry D7845-13 ASTM|D7845-13|en-US Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography – Mass Spectrometry Standard new BOS Vol. 05.04 Committee D02
$ 83.00 In stock

Significance and Use

5.1 The test method allows the quantitation of chemical species at low levels in marine fuel oils and cutter stocks. A great many types and concentrations of chemical species are found in marine fuel oils. A root cause relationship between the presence of such species or their concentration in fuels and any failure modes allegedly induced by the use of these fuels has not been established. This method is necessary to establish test conditions required for future ISO 8217:2010 Petroleum products- Fuels (class F)-Specifications of marine fuel oils as defined in section 5.5 and Annex B item (d). Additional compounds may be determined by using the same conditions and by selecting required mass spectral selected ions, accordingly.

Scope

1.1 This test method covers the quantitative determination of a variety of chemical species in marine fuel oil (bunker fuel oil) by gas chromatography – mass spectrometry. By using the same conditions and by selecting required mass spectral selected ions, the test method may be used for the determination of other species than those for which precision statements and limits of detection have been established.

1.2 An example list of chemical species for which a limit of quantification has been determined by means of this test method is given in Table 1.

TABLE 1 Component Table

 

Limit of Quantitation
mg/kg

n-butyl alcohol

10

Cyclohexanol

10

n-butyl ether

10

n-butyl acylate

10

Styrene

10

alpha-pinene

10

Phenol

20

alpha-methyl styrene

10

beta-pinene

10

4-methyl styrene

10

trans-B-methyl styrene

10

3-methyl styrene

10

2-methyl styrene

10

Dicyclopentadiene

10

Limonene

10

Indene

20

1-phenyl ethanol

20

para, alpha-Dimethyl styrene

20

2,5 dimethyl styrene

20

2,4 dimethyl styrene

20

2-phenyl ethanol (phenylethanol)

20

2-Ethyl Phenol

50

2,4 Dimethyl Phenol

20

4-Ethyl Phenol (co elutes with 3-ethylphenol)

20

2-Phenoxy-1-propanol

50

2-Phenoxy ethanol

50

4-isopropylphenol

50

1-Phenoxy-2-Propanol

20

Styrene Glycol

50


1.3 Other refinery hydrocarbon fractions and their mixtures may be tested using the same test method conditions. However, the precision of this test method reflects the compounds in Table 1.

1.4 Results are reported to the nearest 1.0 mg/kg.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 05.04
Developed by Subcommittee: D02.04.0M
Pages: 11
DOI: 10.1520/D7845-13
ICS Code: 47.020.20; 75.160.20