Standard Active Last Updated: Jan 14, 2020 Track Document
ASTM D7607/D7607M-19

Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)

Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) D7607_D7607M-19 ASTM|D7607_D7607M-19|en-US Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) Standard new BOS Vol. 05.06 Committee D03
$ 61.00 In stock

Significance and Use

5.1 This test method is primarily used to monitor the concentration of oxygen in gases to verify gas quality for operational needs and contractual obligations. Oxygen content is a major factor influencing internal corrosion, fuel quality, gas quality, and user and operator safety.

Scope

1.1 This test method is for the determination of oxygen (O2) in gaseous fuels and fuel type gases. It is applicable to the measurement of oxygen in natural gas and other gaseous fuels. This method can be used to measure oxygen in helium, hydrogen, nitrogen, argon, carbon dioxide, mixed gases, process gases, and ambient air. The applicable range is 0.1 ppm(v) to 25 % by volume.

1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 05.06
Developed by Subcommittee: D03.12
Pages: 4
DOI: 10.1520/D7607_D7607M-19
ICS Code: 75.160.30