Standard Historical Last Updated: Apr 13, 2022 Track Document
ASTM D7255-20

Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)

Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method) D7255-20 ASTM|D7255-20|en-US Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method) Standard new BOS Vol. 15.04 Committee D31
$ 75.00 In stock

Significance and Use

5.1 The resistance of leather to abrasion, as measured on a testing machine in the laboratory, is generally only one of several factors contributing to wear performance or durability as experienced in the actual use of the material. While “abrasion resistance” (often stated in terms of the number of abrasion cycles) and “durability” are frequently related, the relationship varies with different end uses and different factors may be necessary in any calculation of predicted durability from specific abrasion data. This test method provides a comparative ranking of material performance, which can be used as an indication of relative end-use performance.

5.2 The resistance of leather to abrasion may be affected by factors including test conditions; type of abradant; pressure between the specimen and abradant; mounting or tension of the specimen; and type, kind, or amount of finishing materials.

5.3 Abrasion tests utilizing the rotary platform abraser may be subject to variation due to changes in the abradant during specific tests. Depending on abradant type and test specimen, the abrasive wheel surface may change (that is, become clogged) due to the pick up of finishing or other materials from test specimens. To reduce this variation, the abrasive wheels must be resurfaced at regularly defined intervals.

5.4 The measurement of the relative amount of abrasion may be affected by the method of evaluation and influenced by the judgment of the operator.


1.1 This test method covers the determination of the abrasion resistance of leather using the rotary platform abraser.

Note 1: This test method is similar but not equivalent to ISO 17076-1, and results should not be directly compared between the two methods.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Contact Sales
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Book of Standards Volume: 15.04
Developed by Subcommittee: D31.07
Pages: 8
DOI: 10.1520/D7255-20
ICS Code: 59.140.01