Standard Historical Last Updated: Jul 07, 2017 Track Document
ASTM D6924-03(2012)

Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges D6924-03R12 ASTM|D6924-03R12|en-US Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges Standard new BOS Vol. 04.03 Committee D04
$ 73.00 In stock

Abstract

This specification covers the material requirements for preformed thermoplastic vulcanizate (TPV) elastomeric joint seals for bridges. The seal consists of a multiple-web design composed of a TPV and functions only by compression of the seal between the faces of the joint with the seal folding inward at the top to facilitate compression. The seal is installed with a lubricant adhesive and is designed to seal the joint and reject incompressibles. The physical properties for which the seals shall be tested on and conform accordingly to are tensile strength, elongation at break, hardness, oven aging, ozone resistance, low- and high-temperature recovery, and compression-deflection properties.

Scope

1.1 This specification covers the material requirements for preformed thermoplastic vulcanizate (TPV) elastomeric joint seals for bridges. The seal consists of a multiple-web design composed of a TPV and functions only by compression of the seal between the faces of the joint with the seal folding inward at the top to facilitate compression. The seal is installed with a lubricant adhesive and is designed to seal the joint and reject incompressibles.

Note 1—This specification may not be applicable for seals whose height is less than 90 % of its nominal width.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.03
Developed by Subcommittee: D04.34
Pages: 4
DOI: 10.1520/D6924-03R12
ICS Code: 83.140.50; 93.040